View
216
Download
0
Category
Preview:
Citation preview
Aéronautică
GAMA ASAMBLAJScule HSS,
Carbură şi PCD
Soluţiipentru industria aeronautică
Orientarea tehnologică
Fabricant de scule şi vizionar
Mai mult de 10 % din cifra de afaceri este consacrată cercetării şi dezvoltării. DIAGER INDUSTRIE, avant-gardist, propune soluţii de viitor în domeniile cheie ale prelucrării prin aşchiere …
Game de scule :• Găurire• Găurire / Frezare• Alezare• Frezare : - Conturare - Pocketing
Servicii conexe• Asistenţă tehnică în atelierele clientului.• Validarea sculelor în atelierele DIAGER Industrie.• Întreţinerea sculelor (ascuţire şi replacare)• Gestionarea sculelor pe bază de contract.
Logistică• Gestionarea comenzilor cu A.L.F. (Asigurare Livrare Furnizor).• Gestionarea comenzilor prin E.D.I. (Electronic Data Interchange).• Etichetare cu GENCOD.
Un parteneriat strâns şi durabil
Dezvoltarea întreprinderii DIAGER INDUSTRIE este datorată prezenţei din ce în ce mai susţinute a echipelor sale alături de clienţi, însoţindu-i în cadrul dezvoltării noilor lor piese până la producţia în serie, cu grija constantă a ameliorării productivităţii.
De peste 50 de ani, DIAGER INDUSTRIE se impune ca fi ind specialistul sculelor din carbură. Dispunând de un parc de maşini moderne şi de un departament performant de cercetare şi dezvoltare, DIAGER INDUSTRIE utilizează toate sinergiile din grup în scopul proiectării unor scule de înaltă calitate pentru industrie. Adevărat pertener al actorilor importanţi din domeniul industriei mecanice,aeronautice, spaţiale sau automobile, DIAGER INDUSTRIE şi-a concentrat toată experienţa într-o gamă de produse calitativ superioare.
Alegeţi DIAGER INDUSTRIE, şi benefi ciaţi de ultimele inovaţii tehnice.
• Oţel• Carburi & carburi sudate• CBN• PCD
AERONAUTICĂ
3
O gamă de scule din carburi şi carburi sudate corespunzând exigenţelor prelucrărilor prin aşchiere din industria aeronautică.
Scule Carbură
Scule PCD
DIAGER Industrie vă propune soluţia adaptată prelucrării dumneavoastră prin aşchiere
în serviciul dumneavoastră…Un avans tehnologic…
MATERIALEAluminiu
TitanCompozitInconel
Inox
MEDIUMicropulverizare
Sec
MIJLOACEMaşină portativă cu
avans manualMaşină portativă cu
avans automatRobot
Centre de prelucrare prin
aşchiereUnitate de găurire prin interpolare
AERONAUTICĂ
Platforme de test
Controlul sculelorCamere optice de mărire digitală x10 x320 : controale uzură i acuitatea margini.
măsurat cu laser dimentional.presetare.
Controlul pieselorMăsurile tridimensionale efectuate pentru determinarea
capacităţilor sculelor : dispersiq cotelor între diferitele alezaje, ovalizarea alezajelor, controlul unghiurilor
de frezare (CP-CPK). Rugozimetru : Controlul rugozităţii suprafeţelor.
Micrometru Palmer 2 contacte : Controlul alezajelor.Micrometru 3 contacte : Controlul alezajelor.
Montaj special pentru controlul bavurilor
4
Departamentul de Studii & Cercetare
Testele de validare sunt efectuate fie pe platforme de test Huron KX 10 (24 000 tr/ min, răcire centrală
50 Bars sau micro-lubrifiere centrală), fie pe o platformă UPA (Unitate Portativă Automatizată) pentru
aeronautică.Pentru a determina punctele de funcţionare ale sculelor, aceste maşini de test sunt echipate cu
mijloace de măsurare pentru realizarea diagramei de cuplu sculă – piesă C.O.M (Couple Outil Matière).
Birou de studiiStudiul caietelor de sarcini şi
proiectarea sculelor. Pentru a răspunde diversităţii pieţelor, sculele
de găurit, de frezat, de alezat, de interpolare sau de pocketing sunt proiectate pe calculator în 3D volumic
(SolidWorks). Întreprinderea are cinci staţii de lucru care realizează primele simulări înainte de a trece la faza de fabricare. Serviciul tehnic, comercial şi biroul de studii de la Diager Industrie îşi iau angajamentul de a rezolva
problemele de prelucrare prin aşchiere ale clienţilor săi şi se implică în optimizarea performanţelor şi a costurilor.
AERONAUTICĂ
ALTE RUBRICI
Avans tehnologic 2
Scule PCD/carburi 3
Departament studii şi
cercetări4
Condiţii gene-rale de vânzare 23
SCULE STANDARDNr. articol Serii Mărimi Pagini
GĂURIRE/TEŞIREScule HSS, CW şi PCD
90310/91310* Freze de teşit cu ghid monobloc 9
90330/91330* Freze de teşit cu ghid amovibil 10
96230/96330* Freze de teşit diamant 11
95000 Ghid neted 12
9668396210/2473
Burghie - freze de teşit PCD cu burghiu amovibil din carburi 13
GĂURIRE TITANBurghie monobloc din carburi
2472 SN 140° 14
GĂURIRE MATERIALE COMPOZITBurghie monobloc din carburi
2448 Găurire/Alezare 120° 15
ALEZAREGamă alezoare carburi (alu)
2882H Alezoare de fi nisare din carburi monobloc
16
2883H Alezoare ghidate 17
GĂURIRE MATERIALE COMPOZITBurghie cu plăcuţe
2409* SN 118° 18
2419 SN 90° 19
2418* SL 118° 20
GĂURIRE MATERIALE COMPOZIT/ ALUMINIUBurghie cu plăcuţe
2439* SL 118° 21
*în stoc
SCULE SPECIALE CW & PCD Burghie
6-7-8Burghie în trepte pentru găurire şi teş ire
Alezor
Freze
Sumar
Gama Asamblare
5
Credit foto Corporate Communications.© AIRBUS FRANCE S.A.S. 2008.
Toate drepturile rezervate.
AERONAUTICĂ
GĂURIRE ALEZARE TEŞIRE GĂURIRE/TEŞIRE ALEZARE/TEŞIRE
PRINDEREASCUŢIRE GEOMETRII SCULE
Elicoidal 15°
Elicoidal 20°
tăiş drept-0°
Scule speciale
MATERIALE
placare PCDHSS şi CW placare
Diager Industrie proiectează şi realizează burghie, burghie teşitoare, alezoare, şi o mare varietate de scule speciale care permit să se lucreze
pe diferite maşini de producţie (centre de prelucrare prin aşchiere, unităţi portative automatizate, maşini manuale, etc.) pentru a vă permite
realizarea operaţiilor dumneavoastră de găurire, teşire şi alezare chiar şi în condiţiile cele mai difi cile
Elicoidal 30°
6
AERONAUTICĂ
Scule speciale
7
AERONAUTICĂ
GĂURIRE ALEZARE TEŞIRE GĂURIRE/TEŞIRE ALEZARE/TEŞIRE
Interpolare
8
GEOMETRIE
Cu teşiresau fără
Carburi Monobloc
+ placare
+ placare+ Plăcuţe PCD
Diager Industrie are o mare experienţă în domeniul sculelor şi a procesului de interpolare ceea
ce-i permite realizarea unor alezaje sau unor alezaje cu teşituri într-o
singură operaţie, în diverse materiale (aluminiu, titan,inox,
compozit).Principalele avantaje ale
interpolării :• Capacitatea de a realiza alezaje de foarte bună calitate, atât dimensională cât şi din punct de vedere al rugozităţii.• Capacitatea de a lucra în condiţii în care lubrifi erea este foarte scăzută.• Un proces care produce foarte puţine bavuri la ieşirea găurilor realizate.• Posibilitatea de a realiza găuri cu diametre diferite cu aceeaşi sculă.• Control foarte bun al şpanului.
AERONAUTICĂ
Ø 10M 6 x 100
2,38
3
0,2 à 0,4
90310-023891310-0238
3,17 90310-031791310-317
3,5 90310-035091310-0350
3,60 90310-036091310-0360
3,97 90310-039791310-0397
4,00 90310-040091310-0400
4,15 90310-041591310-0415
Ø 14M 8 x 100
4,76
0,4 - 0,75
90310-047691310-0476
4,80 90310-048091310-0480
Ø 14M 8 x 100
5,00 90310-050091310-0500
Ø 10M 6 x 100
5,60 90310-056091310-0560
5,60
0,75 - 1,25
90310-056091310-0560
6,0090310-060091310-0600
6,35 90310-063591310-0635
Ø 17M 8 x 100
8,00 90310-080091310-0800
9,52 90310-095291310-0952
Ø 21M 8 x 100
10,00 90310-100091310-1000
Ø D - M Ø P Număr de tăişuri R Cod Articol
NR ARTICOL
90310HSS
NR ARTICOL
91310Plăcuţe Carburi
9
Teşitor monobloc cu ghidaj HSS şi CW
TĂIŞ ALIAJ UŞOR
Caracteristici :Număr de tăişuri :
3 tăişuri
Alte unghiuri de teşireşi alte
dimensiuni la cerere
90310 :Oţel rapid M42
91310 :Carbură MK15
NR ARTICOL
90330HSS
10
Vezipagina
16
2, 00
M 6 x 100
2 28 mm 3
carbura de vârf
28 mm
rază la cerere
90330-100191330-1001
2, 5090330-100291330-1002
3, 0090330-100391330-1003
3, 5090330-100491330-1004
14 4, 00
M 8 x 100placa
brazate
90330-100591330-1005
175
90330-100691330-1006
21 390330-100791330-1007
Ø D Ø Dq Ø Dp M Număr de tăişuri LT Număr de
tăişuri Particularitate LT R Cod Articol
90330 91330
NR ARTICOL
91330Plăcuţe carbură adăugate
10
Teşitor cu ghidaj amovibilHSS şi CW
TĂIŞ ALIAJ UŞORCaracteristici :Număr de tăişuri :3 tăişuri
Alte unghiuri de teşireşi alte dimensiuni la cerere
90330 :Oţel rapid M42
91330 :Carbură MK15
Ø D Ø Dq Ø Dp M Număr de tăişuri LT Cod Articol
Ø D Ø Dq Ø Dp M Număr de tăişuri LT Cod Articol
15,5
5Vezi
pagina 16 M 8 x 100 3
29,5
96330-155017 96330-170020 96330-200021 96330-210025
6 3296330-2500
27,5 96330-2750
102
Vezi pagina 16
M 6 x 1002 28 mm
96230-1001
2,5 96230-1002
12,4 2 96230-1240
143
M 8 x 10096230-1401
4 96230-1402
REFERENCE
963303 dinţi
REFERENCE
962302 dinţi
11
Teşitor cu plăcuţe diamant
GRAFIT/EPOXYFIBRĂ
DE CARBONALUMINIU/
TITANCaracteristici :
Tăiş spre dreaptaTăiş drept : 0°
Material : PCDşi corp de freză
35 CD4Coaxialitate : 0,01
maxScule livrate cu sau
fără ghid.Şurub de strângere
ghid : M3Alte unghiuri de
teşire sau alte dimensiuni la
cerere
Ø Dp Ø Dq Cod Articol
2,00
2
95000-0200
2,38 95000-0238
2,50 95000-0250
2,80
2,5
95000-0280
3,00 95000-0300
3,17 95000-0317
3,50 3 95000-0350
4,003,5
95000-0400
4,15 95000-0415
4,76
4
95000-0476
4,80 95000-0480
5,00 95000-0500
5,60 95000-0560
6,00 95000-0600
6,35 95000-0635
7,94
5
95000-0794
8,00 95000-0800
9,52 95000-0952
10,00 95000-0100
11,11
6
95000-1111
12,70 95000-1270
14,29 95000-1429
15,87 95000-1587
TRIMITERE
95000
12
Ghid neted
Executăm la cerere toate dimensiunile neobişnuite.
Ø A Ø D M LT Lp Lt ß Cod Articol
Ø A Ø Alezag M ß Cod Articol
Ø A Lp L (totală) Cod Articol
SCULĂ COMPLETĂ Trimitere 96683
CORP Trimitere 96210
Burghiu Trimitere 2473
3,2 12
6 x 100
42 9,5 21,5
100°130°
96683-3212
4,17 12 45 12,5 24,5 96683-4112
4,82 12 48 14,5 26,5 96683-4812
5,56 14
8 x 100
55 17 31 96683-5514
6,35 14 60 19 33 96683-6314
7,92 17 70 23,5 40,5 96683-7917
9,52 17 80 28,5 45,5 96683-9517
12 2,6
6 x 100
100°
96210-1226
12 2,9 96210-1229
12 3,5 96210-1235
14 4,3
8 x 100
96210-1443
14 5 96210-1450
17 6,5 96210-1765
17 8 96210-1780
3,2 9,2 28 2473-0320
4,17 12,5 32 2473-0417
4,82 14,5 35 2473-0482
5,56 17 42 2473-0556
6,35 19 46 2473-0635
7,92 23,5 57 2473-0792
9,52 28,5 66 2473-0952
SCUSCUSCUSCUSCUSCUSCUSCUSCU ĂĂĂĂLĂLĂLĂLĂLĂLĂLĂLĂLĂ COMCOMCOMCOMCOMCOMCOMCOMCOMPLEPLEPLEPLEPLEPLEPLEPLEPLE ĂĂĂĂTĂTĂTĂTĂTĂTĂTĂTĂTĂ T iT iT iT iTriTriTriTriTri ititititmitmitmitmitmitereereereereere 969696969696969696683683683683683683683683683
13
Teşitor PCDcu burghiu carbură amovibil
3xØASerie scurtă
Caracteristici :Corp 96210
Tăiş spre dreaptaTăiş drept : 0°Material : PCD
Corp de freză :Oţel 35CD4
Număr de dinţi : 2
Burghiu 2473Tăiş spre dreapta
Elicoidal dreapta 30°Număr de tăişuri : 2
Canal elicoidal : FDAAscuţire: AF30
Material :carbură MK15
Alte unghiuri de teşire sau alte di-
mensiuni la cerere
SCULĂ COMPLETĂ
96683
CORP
96210Burghiu
2473
ØA LT x Lt ØB Cod Articol ØA LT x Lt ØB Cod Articol
2,5 43 x 14 2,5 2472--0250
3 46 x 16 3 2472--0300
3,2 49 x 18 3,2 2472--0320
3,3 49 x 18 3,3 2472--0330
3,5 52 x 20 3,5 2472--0350
3,7 52 x 20 3,7 2472--0370
4 55 x 22 4 2472--0400
4,1 55 x 22 4,1 2472--0410
4,2 55 x 22 4,2 2472--0420
4,3 58 x 24 4,3 2472--0430
4,5 58 x 24 4,5 2472--0450
4,82 62 x 26 4,82 2472--0482
5 62 x 26 5 2472--0500
5,1 62 x 26 5,1 2472--0510
5,2 62 x 26 5,2 2472--0520
5,3 62 x 26 5,3 2472--0530
5,5 66 x 28 5,5 2472--0550
5,6 66 x 28 5,6 2472--0560
5,8 66 x 28 5,8 2472--0580
6 66 x 28 6 2472--0600
6,1 70 x 31 6,1 2472--0610
6,2 70 x 31 6,2 2472--0620
6,3 70 x 31 6,3 2472--0630
6,35 70 x 31 6,35 2472--0635
6,4 70 x 31 6,4 2472--0640
6,5 70 x 31 6,5 2472--0650
7 74 x 34 7 2472--0700
7,92 79 x 37 7,92 2472--0792
8 79 x 37 8 2472--0800
9,52 84 x 40 9,52 2472--0952
10 89 x 43 10 2472--1000
11,05 95 x 47 11,05 2472--1105
14
Burghiu monobloc carbură 2 tăişuri Titan fără lubrifi ere
TITANCARBONFIBRĂDE STICLĂTERMOPLASTIC
Caracteristici :Tăiş şi elice spre dreapta : 10°Număr de tăişuri : 2Muchie dublă.Canal : FDAscuţire : AF 30Vârf : 140°Carbură : MK 15
3xØASerie
scurtă
TRIMITERE
2472
TRIMITERE
2448
2,5 100 x 45 2,5 2448--0250
3 100 x 45 3 2448--0300
3,2 100 x 45 3,2 2448--0320
3,3 100 x 45 3,3 2448--0330
3,5 100 x 45 3,5 2448--0350
3,7 100 x 45 3,7 2448--0370
4 100 x 45 4 2448--0400
4,1 100 x 45 4,1 2448--0410
4,2 100 x 45 4,2 2448--0420
4,3 100 x 45 4,3 2448--0430
4,5 100 x 45 4,5 2448--0450
4,82 100 x 45 4,82 2448--0482
5 100 x 45 5 2448--0500
5,1 100 x 45 5,1 2448--0510
5,2 100 x 45 5,2 2448--0520
5,3 100 x 45 5,3 2448--0530
5,5 100 x 45 5,5 2448--0550
5,6 100 x 45 5,6 2448--0560
5,8 100 x 45 5,8 2448--0580
6 100 x 45 6 2448--0600
6,1 100 x 45 6,1 2448--0610
6,2 100 x 45 6,2 2448--0620
6,3 100 x 45 6,3 2448--0630
6,35 100 x 45 6,35 2448--0635
6,4 100 x 45 6,4 2448--0640
6,5 100 x 45 6,5 2448--0650
7 100 x 45 7 2448--0700
7,92 100 x 45 7,92 2448--0792
8 100 x 45 8 2448--0800
9,52 100 x 45 9,52 2448--0952
10 100 x 45 10 2448--1000
11,05 100 x 45 11,05 2448--1105
15
Burghiu de găurit/alezat monobloc carbură
3 şi 4 tăişuri
ØA LT x Lu ØB Cod Articol ØA LT x Lu ØB Cod Articol
CARBONFIBRĂ DE
STICLĂ TERMOPLASTIC
Caracteristici :Tăiş drept.
Tăiş axial : 0°Canal : L
Ascuţire : AF 32Vârf : 120°
Carbură : MK 15
Alezor fi nisare monobloc carburăTRIMITERE
2882H
ØA ØC ØB LT x LC Cod Articol
ØA ØC ØB LT x LC Cod Articol
4,00 3,50 4,00
90 x 45
2882H-0400
4,16 3,66 4,16 2882H-0416
4,20 3,70 4,20 2882H-0420
4,76 4,76 4,76 2882H-0476
4,82 4,32 4,82 2882H-0482
4,83 4,33 4,83 2882H-0483
4,86 4,36 4,86 2882H-0486
5,00 5,00 5,00 2882H-0500
5,10 4,60 5,10 2882H-0510
5,22 4,72 5,22 2882H-0522
5,55 5,05 5,55 2882H-0555
5,75 5,25 5,75 2882H-0575
6,00 5,50 6,00
120 x 60
2882H-0600
6,03 5,53 6,03 2882H-0603
6,10 5,60 6,10 2882H-0610
6,25 5,75 6,25 2882H-0625
6,33 5,83 6,33 2882H-0633
6,35 5,85 6,35 2882H-0635
6,37 5,87 6,37 2882H-0637
6,42 5,92 6,42 2882H-0642
6,53 6,03 6,53 2882H-0653
6,74 6,24 6,74 2882H-0674
6,90 6,40 6,90 2882H-0690
7,00 6,50 7,00
140 x 70
2882H-0700
7,14 6,64 7,14 2882H-0714
7,70 7,20 7,70 2882H-0770
7,83 7,33 7,83 2882H-0783
7,92 7,42 7,92 2882H-0792
7,93 7,43 7,93 2882H-0793
7,94 7,44 7,94 2882H-0794
7,97 7,47 7,97 2882H-0797
8,33 7,83 8,33
160 x 80
2882H-0833
8,73 8,23 8,73 2882H-0873
9,30 8,80 9,30 2882H-0930
9,51 9,01 9,51 2882H-0951
9,52 9,02 9,52 2882H-0952
9,53 9,03 9,53 2882H-0953
9,92 9,42 9,92 2882H-0992
10,00 9,50 10,00
180 x 90
2882H-1000
10,32 9,82 10,32 2882H-1032
10,71 10,21 10,71 2882H-1071
10,96 10,46 10,96 2882H-1096
11,00 10,50 11,00
200 x 100
2882H-1100
11,05 10,55 11,05 2882H-1105
11,11 10,61 11,11 2882H-1111
11,51 11,01 11,51 2882H-1151
11,91 11,41 11,91 2882H-1191
12,30 11,80 12,30 2882H-1230
12,70 12,20 12,70 2882H-1270
13,09 12,59 13,09 2882H-1309
13,49 12,99 13,49 2882H-1349
14,27 13,77 14,27 2882H-1427
14,66 14,16 14,66 2882H-1466
15,08 14,58 15,08 2882H-1508
15,88 15,38 15,88 2882H-1588
16
Ø A
Ø B
Ø A
Ø B
LT
LC
Cône:
10 m
m
Ø C
ORICE TIP DE MATERIALCaracteristici :Coadă cilindricăsau triunghiulară.Tăiş spre dreapta.Elice spre stânga : 15°Număr de dinţi : 6Tip carburămicrogranule.Canale şlefuite.Puncte de centrare conservate.
Alezor ghidat
D1(0/-10µ) D2(-10µ/-30µ) Număr de tăişuri LT LU LP Ø Coada Cod Articol
Ø 4,82 Ø 3,2 3 61 31 6 Ø 4,82 2883H-04821
Ø 4,82 Ø 4,1 4 61 31 6 Ø 4,82 2883H-04822
Ø 6,35 Ø 4,1 3 80 40 10 Ø 6,35 2883H-06351
Ø 6,35 Ø 5 4 80 40 10 Ø 6,35 2883H-06352
Ø 7,92 Ø 5 3 92 52 12 Ø 7,92 2883H-07921
Ø 7,92 Ø 6 4 92 52 12 Ø 7,92 2883H-07922
Ø 9,52 Ø 6 3 105 65 15 Ø 9,52 2883H-09521
Ø 9,52 Ø 8 4 105 65 15 Ø 9,52 2883H-09522
Ø 11,11 Ø 8 3 110 65 15 Ø 11,11 2883H-11111
Ø 11,11 Ø 9,2 4 110 65 15 Ø 11,11 2883H-11112
Ø 12,70 Ø 9,2 3 123 78 18 Ø 12,70 2883H-12701
Ø 12,70 Ø 10,8 4 123 78 18 Ø 12,70 2883H-12702
Ø 14,28 Ø 10,8 3 135 90 20 Ø 13 2883H-14281
Ø 14,28 Ø 12,5 4 135 90 20 Ø 13 2883H-14282
17
Mango
ORICE TIP DE MATERIALE
Caracteristici :Canal 2883H
Tăiş spre dreaptaElice spre dreapta 15°
Material :Carbură MK10
Număr de dinţi :3 sau 4 dinţi
Ghid fără tăiş
TRIMITERE
2883H
TRIMITERE
2409
1,50 40 x 18
NO
MIN
AL
2409--0150
1,60 43 x 20 2409--0160
1,70 43 x 20 2409--0170
1,80 46 x 22 2409--0180
1,90 46 x 22 2409--0190
2 49 x 24 2409--0200
2,10 49 x 24 2409--0210
2,20 53 x 27 2409--0220
2,30 53 x 27 2409--0230
2,40 57 x 30 2409--0240
2,50 57 x 30 2409--0250
2,60 57 x 30 2409--0260
2,70 61 x 33 2409--0270
2,80 61 x 33 2409--0280
2,90 61 x 33 2409--0290
3 61 x 33 2409--0300
3,10 65 x 36 2409--0310
3,20 65 x 36 2409--0320
3,30 65 x 36 2409--0330
3,40 70 x 39 2409--0340
3,50 70 x 39 2409--0350
3,60 70 x 39 2409--0360
3,70 70 x 39 2409--0370
3,80 75 x 43 2409--0380
3,90 75 x 43 2409--0390
4 75 x 43 2409--0400
4,10 75 x 43 2409--0410
4,20 75 x 43 2409--0420
4,30 80 x 47 2409--0430
4,40 80 x 47 2409--0440
4,50 80 x 47
NO
MIN
AL
2409--0450
4,60 80 x 47 2409--0460
4,70 80 x 47 2409--0470
4,80 86 x 52 2409--0480
4,90 86 x 52 2409--0490
5 86 x 52 2409--0500
5,10 86 x 52 2409--0510
5,20 86 x 52 2409--0520
5,30 86 x 52 2409--0530
5,40 93 x 57 2409--0540
5,50 93 x 57 2409--0550
5,60 93 x 57 2409--0560
5,70 93 x 57 2409--0570
5,80 93 x 57 2409--0580
5,90 93 x 57 2409--0590
6 93 x 57 2409--0600
6,10 101 x 63 2409--0610
6,20 101 x 63 2409--0620
6,30 101 x 63 2409--0630
6,40 101 x 63 2409--0640
6,50 101 x 63 2409--0650
6,60 109 x 69 2409--0660
6,70 109 x 69 2409--0670
6,80 109 x 69 2409--0680
6,90 109 x 69 2409--0690
7 109 x 69 2409--0700
7,10 109 x 69 2409--0710
7,20 109 x 69 2409--0720
7,30 109 x 69 2409--0730
7,40 109 x 69 2409--0740
7,50 109 x 69 2409--0750
7,60 117 x 75 2409--0760
7,70 117 x 75 2409--0770
7,80 117 x 75 2409--0780
7,90 117 x 75 2409--0790
8 117 x 75
NO
MIN
AL
2409--0800
8,10 117 x 75 2409--0810
8,20 117 x 75 2409--0820
8,30 117 x 75 2409--0830
8,40 117 x 75 2409--0840
8,50 117 x 75 2409--0850
8,60 125 x 81 2409--0860
8,70 125 x 81 2409--0870
8,80 125 x 81 2409--0880
8,90 125 x 81 2409--0890
9 125 x 81 2409--0900
9,10 125 x 81 2409--0910
9,20 125 x 81 2409--0920
9,30 125 x 81 2409--0930
9,40 125 x 81 2409--0940
9,50 125 x 81 2409--0950
9,60 133 x 87 2409--0960
9,70 133 x 87 2409--0970
9,80 133 x 87 2409--0980
9,90 133 x 87 2409--0990
10 133 x 87 2409--1000
10,20 133 x 87 2409--1020
10,50 133 x 87 2409--1050
11 142 x 94 2409--1100
11,20 142 x 94 2409--1120
11,50 142 x 94 2409--1150
12 151 x 101 2409--1200
12,20 151 x 101 2409--1220
12,50 151 x 101 2409--1250
13 151 x 101 2409--1300
13,50 160 x 108 2409--1350
14 160 x 108 2409--1400
14,50 169 x 114 2409--1450
15 169 x 114 2409--1500
15,50 178 x 120 2409--1550
16 178 x 120 2409--1600
16,50 184 x 125 2409--1650
17 184 x 125 2409--1700
17,50 191 x 130 2409--1750
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
Burghiu cu plăcuţe din carbură cu 2 tăişuri
3xØASerie scurtă
18
118°
± 2
°
Ø A
Ø B LT
Lt
MATERIALE COMPOZITE
Caracteristici :Vârf : 118°Tăiş spre dreapta : 6°Elice spre dreapta : 25°Canale : NAscuţire : AF 1Corp :OŢEL RAPIDCarbură : K 20Sudură :Temperatură foarte înaltăPrindere :Cilindrică
90
TRIMITERE
2419
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
90
Cod Articol
Burghiu cu plăcuţe din carbură cu 2 tăişuri
19
3xØASerie scurtă
1,50 40 x 18
NO
MIN
AL
2419--0150
1,60 43 x 20 2419--0160
1,70 43 x 20 2419--0170
1,80 46 x 22 2419--0180
1,90 46 x 22 2419--0190
2 49 x 24 2419--0200
2,10 49 x 24 2419--0210
2,20 53 x 27 2419--0220
2,30 53 x 27 2419--0230
2,40 57 x 30 2419--0240
2,50 57 x 30 2419--0250
2,60 57 x 30 2419--0260
2,70 61 x 33 2419--0270
2,80 61 x 33 2419--0280
2,90 61 x 33 2419--0290
3 61 x 33 2419--0300
3,10 65 x 36 2419--0310
3,20 65 x 36 2419--0320
3,30 65 x 36 2419--0330
3,40 70 x 39 2419--0340
3,50 70 x 39 2419--0350
3,60 70 x 39 2419--0360
3,70 70 x 39 2419--0370
3,80 75 x 43 2419--0380
3,90 75 x 43 2419--0390
4 75 x 43 2419--0400
4,10 75 x 43 2419--0410
4,20 75 x 43 2419--0420
4,30 80 x 47 2419--0430
4,40 80 x 47 2419--0440
4,50 80 x 47 2419--0450
4,60 80 x 47 2419--0460
4,70 80 x 47 2419--0470
4,80 86 x 52 2419--0480
4,90 86 x 52 2419--0490
5 86 x 52 2419--0500
5,10 86 x 52 2419--0510
5,20 86 x 52 2419--0520
5,30 86 x 52 2419--0530
5,40 93 x 57 2419--0540
5,50 93 x 57
NO
MIN
AL
2419--0550
5,60 93 x 57 2419--0560
5,70 93 x 57 2419--0570
5,80 93 x 57 2419--0580
5,90 93 x 57 2419--0590
6 93 x 57 2419--0600
6,10 101 x 63 2419--0610
6,20 101 x 63 2419--0620
6,30 101 x 63 2409--0630
6,40 101 x 63 2419--0640
6,50 101 x 63 2419--0650
6,60 109 x 69 2419--0660
6,70 109 x 69 2419--0670
6,80 109 x 69 2419--0680
6,90 109 x 69 2419--0690
7 109 x 69 2419--0700
7,10 109 x 69 2419--0710
7,20 109 x 69 2419--0720
7,30 109 x 69 2419--0730
7,40 109 x 69 2419--0740
7,50 109 x 69 2419--0750
7,60 117 x 75 2419--0760
7,70 117 x 75 2419--0770
7,80 117 x 75 2419--0780
7,90 117 x 75 2419--0790
8 117 x 75 2419--0800
8,10 117 x 75 2419--0810
8,20 117 x 75 2419--0820
8,30 117 x 75 2419--0830
8,40 117 x 75 2419--0840
8,50 117 x 75 2419--0850
8,60 125 x 81 2419--0860
8,70 125 x 81 2419--0870
8,80 125 x 81 2419--0880
8,90 125 x 81 2419--0890
9 125 x 81
NO
MIN
AL
2419--0900
9,10 125 x 81 2419--0910
9,20 125 x 81 2419--0920
9,30 125 x 81 2419--0930
9,40 125 x 81 2419--0940
9,50 125 x 81 2419--0950
9,60 133 x 87 2419--0960
9,70 133 x 87 2419--0970
9,80 133 x 87 2419--0980
9,90 133 x 87 2419--0990
10 133 x 87 2419--1000
10,20 133 x 87 2419--1020
10,50 133 x 87 2419--1050
11 142 x 94 2419--1100
11,20 142 x 94 2419--1120
11,50 142 x 94 2419--1150
12 151 x 101 2419--1200
12,20 151 x 101 2419--1220
12,50 151 x 101 2419--1250
13 151 x 101 2419--1300
13,50 160 x 108 2419--1350
14 160 x 108 2419--1400
14,50 169 x 114 2419--1450
15 169 x 114 2419--1500
15,50 178 x 120 2419--1550
16 178 x 120 2419--1600
16,50 184 x 125 2419--1650
17 184 x 125 2419--1700
17,50 191 x 130 2419--1750
MATERIALE COMPOZITE
Caracteristici :Vârf : 90°
Tăiş spre drepta : 6°Elice spre dreapta :
25°Canale : N
Ascuţire : AF 1Corp :
OŢEL RAPIDCarbură : K 20
Sudură :Temperatură foarte
înaltăPrindere :Cilindrică
1,80 80 x 53
NO
MIN
AL
2418--0180
1,90 80 x 53 2418--0190
2 85 x 56 2418--0200
2,10 85 x 56 2418--0210
2,20 90 x 59 2418--0220
2,30 90 x 59 2418--0230
2,40 95 x 62 2418--0240
2,50 95 x 62 2418--0250
2,60 95 x 62 2418--0260
2,70 100 x 66 2418--0270
2,80 100 x 66 2418--0280
2,90 100 x 66 2418--0290
3 100 x 66 2418--0300
3,10 106 x 69 2418--0310
3,20 106 x 69 2418--0320
3,30 106 x 69
NO
MIN
AL
2418--0330
3,40 112 x 73 2418--0340
3,50 112 x 73 2418--0350
3,60 112 x 73 2418--0360
3,70 112 x 73 2418--0370
3,80 119 x 78 2418--0380
3,90 119 x 78 2418--0390
4 119 x 78 2418--0400
4,10 119 x 78 2418--0410
4,20 119 x 78 2418--0420
4,30 126 x 82 2418--0430
4,40 126 x 82 2418--0440
4,50 126 x 82 2418--0450
4,60 126 x 82 2418--0460
4,70 126 x 82 2418--0470
4,80 132 x 87 2418--0480
4,90 132 x 87 2418--0490
5 132 x 87 2418--0520
5,10 132 x 87 2418--0510
5,20 132 x 87 2418--0520
5,30 132 x 87 2418--0530
5,40 139 x 91 2418--0540
5,50 139 x 91 2418--0550
5,60 139 x 91 2418--0560
5,70 139 x 91 2418--0570
5,80 139 x 91 2418--0580
5,90 139 x 91 2418--0590
6 139 x 91
NO
MIN
AL
2418--0600
6,10 148 x 97 2418--0610
6,20 148 x 97 2418--0620
6,30 148 x 97 2418--0630
6,40 148 x 97 2418--0640
6,50 148 x 97 2418--0650
6,60 148 x 97 2418--0660
6,70 148 x 97 2418--0670
6,80 156 x 102 2418--0680
6,90 156 x 102 2418--0690
7 156 x 102 2418--0700
7,10 156 x 102 2418--0710
7,20 156 x 102 2418--0720
7,30 156 x 102 2418--0730
7,40 156 x 102 2418--0740
7,50 156 x 102 2418--0750
7,60 165 x 109 2418--0760
7,70 165 x 109 2418--0770
7,80 165 x 109 2418--0780
7,90 165 x 109 2418--0790
8 165 x 109 2418--0800
8,10 165 x 109 2418--0810
8,20 165 x 109 2418--0820
8,30 165 x 109 2418--0830
8,40 165 x 109 2418--0840
8,50 165 x 109 2418--0850
9 175 x 115 2418--0900
9,50 175 x 115 2418--0950
10 184 x 121 2418--1000
10,50 184 x 121 2418--1050
11 195 x 128 2418--1100
11,50 195 x 128 2418--1150
12 205 x 134 2418--1200
12,50 205 x 134 2418--1250
13 205 x 134 2418--1300
13,50 214 x 140 2418--1350
14 214 x 140 2418--1400
14,50 220 x 144 2418--1450
15 220 x 144 2418--1500
16 227 x 149 2418--1600
17 235 x 154 2418--1700
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
TRIMITERE
2418
Burghiu cu plăcuţe din carbură cu 2 tăişuri
5xØASerie lungă
20
MATERIALE COMPOZITE
Caracteristici :Vârf : 118°Tăiş spre dreapta : 6°Elice spre dreapta : 25°Canale : NAscuţire : AF 1Corp :OŢEL RAPIDCarbură : K 20Brasage :Teşperatură foarte importantăPrindere :Cilindrică
2,50 57 x 30
NO
MIN
AL
2439--0250
2,60 57 x 30 2439--0260
2,70 61 x 33 2439--0270
2,80 61 x 33 2439--0280
2,90 61 x 33 2439--0290
3 61 x 33 2439--0300
3,10 65 x 36 2439--0310
3,20 65 x 36 2439--0320
3,30 65 x 36 2439--0330
3,40 70 x 39 2439--0340
3,50 70 x 39 2439--0350
3,60 70 x 39 2439--0360
3,70 70 x 39 2439--0370
3,80 75 x 43 2439--0380
3,90 75 x 43 2439--0390
4 75 x 43 2439--0400
4,10 75 x 43 2439--0410
4,20 75 x 43 2439--0420
4,30 80 x 47 2439--0430
4,40 80 x 47 2439--0440
4,50 80 x 47 2439--0450
4,60 80 x 47 2439--0460
4,70 80 x 47 2439--0470
4,80 86 x 52 2439--0480
4,90 86 x 52 2439--0490
5 86 x 52 2439--0500
5,10 86 x 52 2439--0510
5,20 86 x 52 2439--0520
5,30 86 x 52 2439--0530
5,40 93 x 57 2439--0540
5,50 93 x 57 2439--0550
5,60 93 x 57 2439--0560
5,70 93 x 57 2439--0570
5,80 93 x 57 2439--0580
5,90 93 x 57 2439--0590
6 93 x 57 2439--0600
6,10 101 x 63
NO
MIN
AL
2439--0610
6,20 101 x 63 2439--0620
6,30 101 x 63 2439--0630
6,40 101 x 63 2439--0640
6,50 101 x 63 2439--0650
6,60 101 x 63 2439--0660
6,70 101 x 63 2439--0670
6,80 109 x 69 2439--0680
6,90 109 x 69 2439--0690
7 109 x 69 2439--0700
7,10 109 x 69 2439--0710
7,20 109 x 69 2439--0720
7,30 109 x 69 2439--0730
7,40 109 x 69 2439--0740
7,50 109 x 69 2439--0750
7,60 117 x 75 2439--0760
7,70 117 x 75 2439--0770
7,80 117 x 75 2439--0780
7,90 117 x 75 2439--0790
8 117 x 75 2439--0800
8,10 117 x 75 2439--0810
8,20 117 x 75 2439--0820
8,30 117 x 75 2439--0830
8,40 117 x 75 2439--0840
8,50 117 x 75 2439--0850
8,60 125 x 81 2439--0860
8,70 125 x 81 2439--0870
8,80 125 x 81 2439--0880
8,90 125 x 81 2439--0890
9 125 x 81 2439--0900
9,50 125 x 81
NO
MIN
AL
2439--0950
10 133 x 87 2439--1000
10,50 133 x 87 2439--1050
11 142 x 94 2439--1100
11,50 142 x 94 2439--1150
12 151 x 101 2439--1200
12,50 151 x 101 2439--1250
13 151 x 101 2439--1300
13,50 160 x 108 2439--1350
14 160 x 108 2439--1400
14,50 169 x 114 2439--1450
15 169 x 114 2439--1500
15,50 178 x 120 2439--1550
16 178 x 120 2439--1600
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
21
Burghiu cu plăcuţe din carbură cu 2 tăişuri
0 57 x 30 2439--0250
A LT x Lt ØB Cod Articol
3xØASerie scurtă
COMPOZIT/ ALUMINIUCOMPOZIT/ TITANCOMPOZIT/ INOXCaracteristici :Vârf : 118°Tăiş spre dreapta : 16°Elice spre dreapta : 25°Canale : şlefuite : NAscuţire : AF 20Corp :OŢEL RAPIDCarbură : MK 20Prindere :Cilindrică
TRIMITERE
2439
5 132 x 87
NO
MIN
AL
2436--0500
5,10 132 x 87 2436--0510
5,20 132 x 87 2436--0520
5,30 132 x 87 2436--0530
5,40 139 x 91 2436--0540
5,50 139 x 91 2436--0550
5,60 139 x 91 2436--0560
5,70 139 x 91 2436--0570
5,80 139 x 91 2436--0580
5,90 139 x 91 2436--0590
6 139 x 91 2436--0600
6,10 148 x 97 2436--0610
6,20 148 x 97 2436--0620
6,30 148 x 97 2436--0630
6,40 148 x 97 2436--0640
6,50 148 x 97 2436--0650
6,60 148 x 97 2436--0660
6,70 148 x 97 2436--0670
6,80 156 x 102 2436--0680
6,90 156 x 102 2436--0690
7 156 x 102 2436--0700
7,10 156 x 102 2436--0710
7,20 156 x 102 2436--0720
7,30 156 x 102 2436--0730
7,40 156 x 102 2436--0740
7,50 156 x 102
NO
MIN
AL
2436--0750
7,60 165 x 109 2436--0760
7,70 165 x 109 2436--0770
7,80 165 x 109 2436--0780
7,90 165 x 109 2436--0790
8 165 x 109 2436--0800
8,10 165 x 109 2436--0810
8,20 165 x 109 2436--0820
8,30 165 x 109 2436--0830
8,40 165 x 109 2436--0840
8,50 165 x 109 2436--0850
8,60 175 x 115 2436--0860
8,70 175 x 115 2436--0870
8,80 175 x 115 2436--0880
8,90 175 x 115 2436--0890
9 175 x 115 2436--0900
9,50 175 x 115 2436--0950
10 184 x 121 2436--1000
10,50 184 x 121 2436--1050
11 195 x 128 2436--1100
11,50 195 x 128 2436--1150
12 205 x 134 2436--1200
12,50 205 x 134 2436--1250
13 205 x 134 2436--1300
13,50 214 x 140 2436--1350
14 214 x 140 2436--1400
14,50 220 x 144 2436--1450
15 220 x 144 2436--1500
15,50 227 x 149 2436--1550
16 227 x 149 2436--1600
TRIMITERE
2436
ØA LT x Lt ØB Cod Articol
ØA LT x Lt ØB Cod Articol
22
Burghiu cu plăcuţe din carbură cu 2 tăişuri
COMPOZIT/ ALUMINIUCOMPOZIT/ TITANCOMPOZIT/ INOXCaracteristici :Vârf : 118°Tăiş spre dreapta : 16°Elice spre dreapta : 25°Canale : şlefuite : NAscuţire : AF 20Corp :OŢEL RAPIDCarbură : MK 20Prindere :Cilindrică
5xØASérie
longue
23
Condiţii generale de vânzare AERONAUTICĂ
1 - GENERAL1.1- DIAGER markets two large categories of products, one of “standard products”, which are the items featured in the DIAGER catalogue, the other of “specifi c products”, defi ned by special production specifi cations, a particular conditioning or, generally, by individual commitments required by the Customer such as a distributor’s brand name.1.2 - The specifi c products defi ned above will, in addition to the present provisions, be the object of the signature of a partnership set up between DIAGER and the Customer, the contents of which are outlined in Article 11 hereunder.1.3Any order of goods implies that the purchaser fully accepts and adheres, without reserves, to the terms and conditions of sale hereof, which shall prevail over any other purchase document, in particular the general terms and conditions of purchase.
2 - ORDERS2.1 – Orders received are only valid after being expressly accepted by us, in particular orders taken by telephone or via a sales representative.2.2 - The Customer irrevocably accepts the terms of orders transmitted to our Company, unless agreed otherwise by us. Under this assumption, our Company is not under the obligation to maintain the initial deadlines. Furthermore, as far as remainders are concerned, the Customer will inform us when placing its orders whether remainders are to be managed or not. If not indicated on the order, remainders will be managed.2.3 – In the event that a Customer may order goods from our Company without having paid for previous order(s), our Company may refuse to accept the order, the Customer being entitled to no compensation for any reason whatsoever.2.4 – Any cancellation of an order will generate a refund of expense liabilities: tooling, materials, labour, etc…
3 – DELIVERIES3.1 – Deadlines3.1.1 – Delivery dates are given for indicative purposes. Delivery delays for any reason or incident leading to total or partial slowdown or stoppage of our workshops, failure by our suppliers or force majeure may not generate any penalties or cancellation of orders.3.1.2 – In any case, delivery may be undertaken within the deadlines only if the Customer is up-to-date as regards to its obligations towards our Company, the Customer being entitled to no compensation whatsoever.3.1.3 - In the case of specifi c products mentioned in 1.1 above, and except in cases caused by force majeure events, DIAGER accepts the consequences of the obligations it is put under by the Customer in relation to the compliance with the rate of service, crucially subject to the Ccustomer communicating to DIAGER its monthly orders forecast by reference every year in December for the following year.3.2– ConditionsDelivery is carried out either by directly handing over the product to the Customer, or by a simple notice of availability, or by release to a forwarding or haulage agent at our premises.
3.3 - Risks Any transportation, insurance, customs and handling operations are borne at the expense and risk of the purchaser. The latter should check the consignments on arrival and make its claims against the transportation agents, in compliance with Article L. 133-3 of the Commercial Code, even in the event of dispatching on a postage and shipping paid basis. Should the seller undertake dispatching, the consignment is sent “postage/shipment due”, at the lowest rates, unless otherwise expressly requested by the purchaser and, in all cases, under the entire responsibility of the latter.
4 - QUALITY4.1 – DIAGER undertakes to maintain the quality of its products under the terms of its ISO 9001 accreditation.4.2 – Rejects do not imply that delays in payment of good parts are permitted.4.3 – In the event of sub-contracted work, we guarantee that such work is undertaken exclusively in accordance with the notes, tolerance margins and specifi cations, as expressly indicated to us.4.4 – In the case of the specifi c products defi ned in 1.1 above, the Customer must outline in the specifi cations of the partnership agreement mentioned in 11 below all the characteristics of the parts to be manufactured, notably in relation to the material shades, the reference standards and the general tolerance for the dimensions without mention of margins on the drawings. On another hand, the Customer will be allowed to visit the manufacturing premises of the supplier at any time, and may, at his own expense, monitor himself or through his chosen representatives, quality controls on the Products.
5 – RETURNED GOODSAny goods returned are subject to a written agreement between our Company and the Customer. Any goods returned without such agreement will be made available to the Customer and no credit note issued.Risks and expenses related to returned goods shall always be borne by the Customer.Any returned goods accepted, once checked, will generate at the choice of our Company:-Either a credit note prepared on behalf of the Customer-Or replacement of the goods.
6 – GUARANTEES6.1 - ScopeThe guarantee is strictly limited to the replacement of parts recognised by our factories as being faulty, excluding any damages claimed for any reason whatsoever.6.2 - ConditionsPresentation of the paid invoice is required prior to implementation of our guarantee.Any claims shall be made within 30 days subsequent to reception of the goods.6.3 - ExclusionsAny conspicuous defects, fl aws and degradation caused by normal wear-and-tear, external accident (incorrect assembly, faulty maintenance, abnormal use, etc.) and third party intervention are excluded.In the event that the Customer may touch up, or have touched up by third parties, any parts considered as faulty, no invoice or expense claim will be accepted without our prior, specifi c agreement.6.4 – Particular products In the event of manufacturing parts according to models or drawings supplied by the Customer, the latter will undertake to compensate us for any prejudice caused in pursuance of intellectual property laws (patents or registration of models).
7 - PRICES7.1 a) Standard products : i - Prices are established at the date of ordering. They are net in euros «ex works» prices excluding tax on the basis of a price list transmitted to the purchaser. Prices are rescaled according to rates of raw material supplies and labour costs as per the I.N.S.E.E. index, pursuant to current legislation, in particular in cases of open orders, staggered deliveries, etc.ii - Prices can be reviewed under the following conditions, according to the average cost price structure outlined in the table hereunder:
Each price of these products will evolve according to the following basic indexes:- Alloy steel, source SAARSTAHL website, basis September 2009 = Ao = 353€ / ton - Carbide : Umt, source METAL BULLETIN, Tungsten European Free market, basis September 2009 = Bo = USD=197,5/MTU- Cardboard: PPI, source RISI Inc. Belgium, basis September 2009 = Co = 116,00- Barrel of oil, basis September 2009 = Eo = USD 67,61/baril- Added value: INSEE consumer prices increase, basis September 2009 = Fo = 119,37The review will be implemented twice yearly, on 1st July and 1st January, by application of the following formula:P date of review = Po * { [G*(Ax/Ao)] + [H*(Bx/Bo)] + [K*(Cx/Co)] + [L*(Dx/Do)] + [M*(Ex/Eo)] + [N*(Fx/Fo)] } in which:P = reviewed pricePo = quotation price applicable on 01.01.2010x = date of review minus 4 months
7.1 b) Specifi c products:i - DIAGER and the Customer agree on a negotiated pricelist. This pricelist is based on the conditions of Article L. 441-7 of the Commercial Code, and on:-manufacturing specifi cations,
-a range of specifi c products,-a specifi c conditioning,-a volume of purchase,-and, generally, specifi c conditions.For this purpose, the Customer’s tender must detail in a suffi ciently accurate way all the above-mentioned features.ii - Prices are fi xed on the date of order. They are net, “ex-works”, before tax, on the basis of the negotiated pricelist. They are reviewed under the conditions of article 7.1.a.ii above. 7.2 – On ordering, any change in measurements, margins of tolerance, quantities, etc. will lead to automatic rescaling of the proposed price inasmuch as such changes affect such price.7.3 – Preliminary batches or prototypes are invoiced at cost price.7.4 – In the event that manufacturing is stopped at the request of the Customer for parts trials or any other reasons, stoppage times are invoiced according to current, hourly machine-rates.7.5 – Any taxes, dues or other payments pursuant to the laws of France or of any country of import or transit and any changes in such between the date of order and the date of invoice will be borne by the purchaser.Postage and shipping will be borne by the purchaser unless a prior written agreement of the supplier is obtained.
8 – PAYMENT TERMS8.1 – Goods are payable at our registered offi ce. However, for the fi rst year of commercial relations, payment of the outstanding balance is at 30 days of invoice. Furthermore, our Company will notify the Customer of the credit limit granted to it.8.2 – While making the payment, the Customer will specify the detail of the regulated invoices.Any sum unpaid by the Customer at due date will generate penalties calculated on an interest rate fi xed at three times the legal rate. Such penalties are payable ipso jure, simply upon request by our Company.Moreover, our Company reserves the right on the one part to refer to the relevant jurisdiction in order to put a stop to such failure, subject to a daily penalty applicable to each day of delay in payment and, on the other part, to amend the payment terms granted to the Customer in order to obtain a cash payment for the following orders. 8.3 – In the event of contentious proceedings, in order to recover an unpaid receivable, a 15% surcharge will be applied to the sum owed for prejudice and business disturbance, any taxes being payable in addition, as damages applicable by right.8.4 - Our Company will not grant any discounts for payments in cash or earlier than the date arising here from.8.5 – If the event of an incident, the Customer shall inform our Company in writing of the details of this incident. At the end of each month, the Customer will draw up a monthly list of incidents not dealt with by our Company. Our Company must have previously acknowledged any incident in writing for compensation to be paid.8.6 – In relation to amounts that may be owed by DIAGER to the Customer, DIAGER, after having given its agreement under the form of a credit note (or the reception of an invoice for services provided by the customer and compliant with the contractual terms), authorises the Customer to operate a compensation between the amounts due by DIAGER and those due to DIAGER by the Customer.
9 – OWNERSHIP RESERVEThe seller reserves the right of ownership to the goods until principal and interest are fully paid up. Failing payment of the price at the agreed due date, our Company may recover the goods, the sale being annulled by right, as our Company sees fi t, and any down payments will become ours by right in return for use of the goods obtained by the Customer and in order to cover any losses related to resale.Suspension of payments by the Customer will render the authority to resell null and void. Failure to pay any instalment whatsoever will entail an indistinct claim to the goods, equivalent to the unpaid amount.
10 – ACT OF GOD (force majeure)The occurrence of force majeure will result in suspension of performance of its contractual obligations by our Company. Force majeure is any event that is independent of our Company’s will, obstructing its normal running at the stage of manufacturing or dispatching the goods. The following are considered as cases of force majeure: total or partial strikes hindering the correct operation of our Company or of any suppliers, subcontractors or haulers and interruption of transportation, energy supplies, raw materials or spare parts. In such circumstances, our Company will notify the Customer within 72 hours of the date of occurrence of events, the contract binding our Company and the Customer being suspended by right, with no compensation as of occurrence of the event.
11 – PARTNERSHIP ON SPECIFIC PRODUCTSAccording to Article L. 441-7 of the French Commercial Code, when engaged into commercial relations over specifi c products, DIAGER and the Customer agree to sign a partnership agreement, which will include all legal obligations, a reminder of the present general terms of trading, in particular the negotiated pricelist outlined in Article 7.1 b) i as well as the price review set out in Article 7.1. b) ii, and the following provisions:- Specifi cations incorporating all the administrative, commercial and technical details, as well as the drawings to enable the manufacture, conditioning and delivery of the products,- Duration: the contract covers a period of one years from the date of the Customer’s fi rst order. The duration will be extended tacitly for an equivalent period, except if either party informs the other, by recorded post with proof of delivery, and at least three months before the expiry of the ongoing period, of its intention to not envisage the extension of the contract at the end of the initial period or any subsequent. - At the time of partnership termination or of a change of the range of products, the Customer undertakes to purchase, under the terms agreed, the stocks of packed products held by DIAGER as well as the packaging bearing the Customer’s brand name. Such commitment will not apply in the following events: termination of the relation at the initiative of DIAGER or termination initiated by the Customer pursuant to a proven fault ascribable to DIAGER..- Contribution to the household packaging: in compliance with the European Directive 94/62/CE modifi ed and the respective national regulations, the producer (if present on local market) or the importer of packed goods shall declare and pay the relating contribution on household packaging to the local Green Dot System (Pro Europe member).- Information conveying: in order to ensure the proper fulfi lment of the commercial relation, the Customer informs DIAGER of the details (name, address, telephone, fax, e-mail) of appointed contacts, and undertakes to notify to DIAGER any change to this list: Person in charge of the DIAGER fi le at the Customer’s, Suppliers’ accounts department.
12 – TERMINATION OF THE COMMERCIAL RELATIONS Any improper termination of the commercial relations causing a detriment to our Company will lead to compensation being due to our Company by the co-contracting party.
13 - ENVIRONMENT AND ETHICS13.1 - DIAGER undertakes to respect the environment in accordance with its certifi cation ISO 14001. 13.2 - DIAGER undertakes and requires of its Customers to also undertake to respect the fundamental principles recalled in the charter of ethics of DIAGER.
14 – ATTRIBUTION OF JURISDICTION 14.1 – Customers of FRANCEIn the event of dispute, attribution of competence is made with the courts of Besancon (25), France and this whatever the conditions of sale and the mode of payment accepted even in the event of call in guarantee or of plurality of defendants.14.2 – Customers OUT OF FRANCEAny litigation arising herefrom, in particular with regard to the validity, interpretation, execution or annulment hereof shall be settled in pursuance of the laws of France and referred to the International Chamber of Commerce (ICC) of Paris for arbitration in pursuance of Article 1455 of the new Code de Procédure Civile (French code of civil procedure).
15 – LAWS APPLICABLEThe law of France shall govern issues related to the terms and conditions of sale hereof and any sales concluded by the Company.
16 – VALIDITYThe present general terms of trading will take effect from 01.01.2010.
ZI - rue Claude Nicolas LedouxBP 30036 - 39801 POLIGNY Cedex 1 - FranceTél. (33 (0)3 84 73 70 20Fax (33) (0)3 84 37 39 27contact@diager-industrie.com
Recommended