View
230
Download
5
Category
Preview:
Citation preview
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK/BME Beschaffungsleitfaden Spanien 2014
Lieferanten, Potenziale & Chancen für deutsche Einkäufer in Spanien
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014
Spanienüberblick Einleitung
Das Königreich Spanien ist eine parlamentarische Erbmonarchie und gehört mit mehr als 47 Millionen registrierten Einwohnern zu den fünf bevölkerungsreichsten Staaten der Europäischen Union. Das Land erstreckt sich auf einer Landesfläche von 505.962,83 km2. Nach Bevölkerungsprognosen von EUROSTAT wird die spanische Bevölkerung bis 2060 auf 52 Millionen Einwohner anwachsen und gehört damit zu den Mitgliedsstaaten mit dem höchsten prognostizierten Bevölkerungswachstum. Insgesamt ist Spanien in 50 Provinzen, 17 Autonome Regionen (Comunidades Autónomas) und 8.116 Gemeinden eingeteilt. Hinzu kommen noch die beiden autonomen Städte Ceuta und Melilla, zwei spanische Exklaven an der marokkanischen Mittelmeerküste. Diese Autonomías stellen selbstständige Verwaltungsregionen dar, die über eine relativ hohe Entscheidungsfreiheit verfügen. Neben dem Spanischen (castellano) existieren drei weitere Amtssprachen: Katalanisch (catalán), Baskisch (euskera) und Galicisch (gallego). Ihre Verbreitung ist hauptsächlich auf die Regionen Katalonien, die Balearen, das Baskenland und Galicien beschränkt. Die wirtschaftlichen Aktivitäten konzentrieren sich vor allem auf die Wirtschaftsregionen Katalonien, Valencia, Aragonien und fast die ganze Nordküste Spaniens. Dazu kommt der Stadt Madrid im Landesinneren durch ihre Hauptstadtfunktion eine besondere Bedeutung zu. Die Autonomen Regionen Spaniens
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
Kennzahlen Wirtschaft Mit einem Bruttoinlandsprodukt (BIP) von 1.050 Mrd. Euro war Spanien 2012 trotz des Wirtschaftsrückgangs unverändert die fünftgrößte Volkswirtschaft innerhalb der EU, hinter Deutschland, Frankreich, dem Vereinigten Königreich und Italien. Deutschland ist Spaniens zweitwichtigster Handelspartner nach Frankreich. Das Land mit einer Bevölkerung von etwas über 47 Millionen Einwohnern erwirtschaftet ein Bruttoinlandsprodukt (BIP) von 1.050 Milliarden Euro. Die verarbeitende Industrie hat einen Anteil am BIP bezogen auf die Bruttowertschöpfung von 17%, die Dienstleistungen von 71%. Der BIP pro Kopf beträgt 22.772 Euro. Das spanische Außenhandelsdefizit ist 2012 um 33,6% auf nur noch 30,8 Mrd. Euro gesunken. Die Exporte Spaniens nach Deutschland sind gegenüber 2012 um 8% auf 23,3 Milliarden (Mrd.) Euro gestiegen. Unternehmensstrukturen Spanien ist mit rund 3,25 Millionen registrierten Unternehmen eines der EU-Länder mit der höchsten Unternehmensanzahl. Dies ist darauf zurückzuführen, dass es sich bei 93,8% der Firmen um Mikrounternehmen (bis zu 9 Mitarbeitern) handelt, die zum Großteil im Dienstleistungssektor tätig sind. Nur 5,4% sind Kleinunternehmen (10-49 Mitarbeiter), 0,7% sind Mittelunternehmen (50 bis 249 Mitarbeiter) und 0,1% sind Großunternehmen mit über 250 Beschäftigten. Die Mikrounternehmen vereinen rund 40% aller Erwerbstätigen auf sich, erbringen jedoch nur 27,7% der Bruttowertschöpfung (BWS). Über die Hälfte (52,5%) der Mikrounternehmen sind Selbstständige ohne Mitarbeiter (1,9 Millionen Personen). Knapp 50% aller Unternehmen verteilen sich auf nur drei Autonome Regionen: Katalonien (18,5% der Unternehmen), Madrid (15,4%) und Andalusien (15,1%). Kennzahlen Subcontracting Die Anzahl der offiziell registrierten Subcontracting-Anbieter beläuft sich auf rund 13.000 Industrieunternehmen mit 270.000 Mitarbeitern, die einen Umsatz von 61 Mrd. Euro erzielen. Dies bedeutet einen Anteil von 10,2% der Industrie-Beschäftigten und 10,4% des Umsatzes, der im Industriesektor erzielt wird. Der Dachverband der spanischen Industrie- und Handelskammern schätzt die Anzahl potentieller Zulieferer sogar auf über 20.000 Unternehmen mit insgesamt rund 500.000 Beschäftigten. Es handelt sich zum Großteil um konsolidierte Unternehmen: 71,6% der in Spanien erfassten Subcontracting-Unternehmen nahmen vor 1985 ihre Tätigkeit auf und 94,9% weisen spanisches Kapital auf. 88,6% der Anbieter sind kleine und mittelständische Unternehmen mit weniger als 100 Mitarbeitern. Die wichtigsten Subcontracting-Sektoren sind die Herstellung von Eisen- und Metallprodukten (21,1% der Industriezulieferer), Komponenten und Teile für die Fahrzeugindustrie (18,9%), Maschinen- und Anlagenbau (11,1%), Produkte der Elektrotechnik und Elektronik (7,9%) sowie Kunststoff- und Kautschuk-Produkte. Über 60% der Zulieferprodukte gehen in den Export, zum Großteil in die europäischen Nachbarländer wie Frankreich mit rund 33%. Nach Deutschland gehen immerhin 20% dieser Lieferungen und Leistungen. Die Subcontracting-Unternehmen investieren überdurchschnittlich in Personal und Ausrüstung: 80% verfügen über Personal mit Fremdsprachenkenntnissen, 47% investieren in FuE und rund 60% investierten in den letzten Jahren in die Erweiterung und Verbesserung ihrer Produktionsanlagen.
Wichtigste Zuliefersektoren
Die Industrieunternehmen machen einen Anteil von 6,8% der Unternehmensanzahl aus, erwirtschaften jedoch 13,3% des BIP (Industrie ausschließlich Energiesektor) bzw. 15,9% (Industrie inklusive Energie). Weitere 15% der Unternehmen gehören zum Bausektor, 24,1% zum Handel und 54,1% zu sonstigen Dienstleistungen.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
Fahrzeugtechnik Die spanische Automobilfertigung setzt sich aus acht großen Unternehmensgruppen zusammen, die 17 Produktionsstätten im Land betreiben mit insgesamt rund 58.000 Mitarbeitern: Ford España, General Motors España, Iveco España, Mercedes-Benz España, Nissan Motor Iberica, Peugeot Citroën Automóviles España, Renault España und Seat-Volkswagen. Gemessen am produzierten Fahrzeugvolumen belegt Spanien schon seit einigen Jahren nach Deutschland den zweiten Rang in Europa. Im weltweiten Vergleich nahm das Land 2012 Platz zwölf ein. Die Automobilindustrie in Spanien konzentriert sich vor allem auf diese Standorte: 36% Katalonien und Aragonien sowie 26% Baskenland, Navarra und Kantabrien. Auf den Großraum Madrid einschließlich Kastilien-León und Kastilien-La Mancha entfallen 20%. Alle übrigen Regionen kommen zusammen auf 18%. Der Sektor der Kfz-Teilefertigung umfasst knapp 1.000 Unternehmen (davon rund 50% ausländische Firmen) mit etwa 185.000 Mitarbeitern. Strukturell verteilen sich diese wie folgt: First-Tier-Bereich: 187; Second-Tier: 215; Third-Tier: 245; Originalersatzteile: 131; sonstige Ersatzteile 158: Zubehör: 25 und übrige: 26. Es dominieren in diesem Segment kleine und mittelständische Produzenten. Der Automobilbau einschließlich der Kfz-Zulieferindustrie und des Händlernetzes zählt zu den wichtigsten Wirtschaftssparten Spaniens. Der Gesamtzweig hält einen Anteil von circa 10% am BIP (rund 6% Kfz-Herstellung und etwa 4% Kfz-Teilefertigung). Dies entspräche einem Gesamtwert von etwa 100 Mrd. Euro. Metallverarbeitung / Maschinen- und Anlagenbau Der spanische Metallsektor verzeichnet 212.500 Beschäftigte (ohne Maschinen- und Anlagenbau). Im Anlagenbau beläuft sich die Gesamtzahl der Unternehmen laut dem Branchenverband SERCOBE auf rund 2.000 mit einer Gesamtbeschäftigtenzahl von rund 180.000 Personen. Der Sektor generiert einen Umsatz von 37,2 Mrd. Euro, wobei rund 60% auf den Bau von mechanischen Maschinen und Anlagen entfallen und 40% auf elektrotechnische und elektronische Maschinen. Die Exporte machen jährlich über 26 Mrd. Euro aus. Der Anteil an der industriellen Bruttowertschöpfung beträgt etwa 12%. Der spanische Maschinenbau und Anlagenbau verfügt über leistungsfähige Firmen mit einer schwachen Kapazitätsauslastung. Für ausländische Industrieunternehmen bieten sich zahlreiche Geschäftschancen von der Auftragsfertigung über Firmenkooperationen bis hin zu Übernahmen. Chemie / Pharma / Kunststoff Der Sektor setzt sich zusammen aus 3.109 Unternehmen, die 55 Milliarden € Umsatz generieren. Die chemische Industrie, die traditionell in Katalonien angesiedelt ist, ist mit ihren über 500.000 Beschäftigten, davon 154.900 direkten Arbeitsplätzen, von großer Bedeutung für die spanische Wirtschaft. Die Wertschöpfung des Sektors (einschließlich der Arzneimittelerzeugung) im Rahmen der volkswirtschaftlichen Gesamtrechnung beläuft sich auf einen Anteil von rund 11,5% an der gesamten Industrieproduktion. Unter Hinzurechnung der Petrochemie und der Herstellung von Kautschuk und Kunststoffen erreicht der Bereich sogar einen Anteil von über 23%. Der Sektor ist traditionell stark exportorientiert, eine Tendenz, die sich während der letzten Jahre aufgrund des rückläufigen Binnenmarkts verstärkte. Zudem zeichnet die Branche eine beachtliche Investitionstätigkeit, namentlich in FuE, aber auch in Anlagen und Maschinen, aus. Elektronik, Elektrotechnik, IT, IKT Im Elektronik- und IKT-bereich sind 1.459 Unternehmen tätig, die einen Anteil von 1,13% der Industrie ausmachen. Die knapp über 30.000 Beschäftigten erwirtschaften einen Jahresumsatz von 4,76 Mrd. Euro. Die Unternehmen sind mehrheitlich in den Regionen Katalonien und Madrid ansässig.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
Lebensmittel und Getränke Der Sektor erwirtschaftete 2012 einen Nettoumsatz von 86,3 Mrd. Euro, was einem Anteil von 14% des gesamten Nettoumsatzes der Industrie entspricht und 7,6% des Bruttoinlandsproduktes bedeutet. Damit nimmt der Sektor Platz eins in der spanischen Wirtschaft ein und den fünften Platz auf EU-Ebene. Knapp 30.000 Unternehmen sind in dem Sektor tätig (96,2% KMU) mit 439.675 Beschäftigten, die 20% der Beschäftigten in der Industrie ausmachen. Gemüse und Früchte sind eines der Hauptausfuhrgüter Spaniens. Der Export erreichte 2012 die Höhe von 22,1 Mrd. Euro und die Handelsbilanz verbucht einen Überschuss von über 3 Mrd. Euro. Von den Gesamtexporten an Gemüsen und Früchten gingen 20,3% nach Deutschland. In den Jahren 2005 bis 2012 haben sich alleine die Ausfuhren von Obst und Gemüse um rund 38% erhöht.
Standortvorteile des spanischen Beschaffungsmarktes
Günstige Lohn- und Lohnnebenkosten Von den über 47 Millionen Einwohnern Spaniens sind rund 23 Mio. Erwerbspersonen, von denen 18 Mio. erwerbstätig sind und rund 5 Mio. erwerbslos. Arbeitsreformen führen zur Senkung der Löhne und damit zu einer höheren Wettbewerbsfähigkeit gegenüber anderen EU-Ländern und Nicht –EU-Ländern. Die Durchschnittseinkommen in Spanien betrugen 2012 brutto 21.400 Euro (in Deutschland mit 40.914 € knapp das Doppelte), die Wochenarbeitszeit meist 40 Stunden. Zum Vergleich: Das Jahresbruttogehalt für einen IT Support Operator (ohne Berufserfahrung) beträgt in Spanien rund 25.000 €, in Deutschland über 40.000 €. Die niedrigen Löhne und Lohnnebenkosten schlagen sich auf die Preise für die Industrieprodukte nieder. Das gute Preis-Leistungsverhältnis ist für zwei Drittel der Auftraggeber ausschlaggebend. Traditionell besteht ein starkes Nord-Süd-Gefälle in Bezug auf Wirtschaftskraft und Einkommens-niveau der Autonomen Regionen. Vom Baskenland mit dem höchsten Pro-Kopf-Einkommen über den Großraum Madrid bis nach Extremadura, wo das Pro-Kopf-Einkommen um mehr als 30% unter dem Landesdurchschnitt liegt. Günstige geographische Lage und gut ausgebaute Infrastrukturen Spanien gilt dank seiner zentralen geografischen Lage und seiner besonderen Verbindung zu den afrikanischen Mittelmeeranrainern und nach Lateinamerika als interessanter Logistikstandort und Drehkreuz für den europäischen und internationalen Warentransport. Im Zuge der Modernisierung der gesamten Verkehrsinfrastruktur treibt die Regierung auch den Ausbau eines 1.300 langen Mittelmeertransportkorridors voran, der von Girona an der französischen Grenze bis in den Süden nach Algeciras reichen und den Schienengütertransport mit den wichtigsten spanischen Häfen und Flughäfen Barcelona, Tarragona, Valencia, Cartagena und Algeciras vernetzen wird. Spanien ist mit über 14.689 km das EU-Land mit den meisten Autobahnkilometern und weltweit belegt es damit den 3. Platz hinter Nordamerika und China. Weltweit belegt Spanien mit 3.744 ICE-Strecken-kilometern den 2. Platz nach China. Die 50 spanischen Flughäfen verzeichneten 2012 über 194 Millionen Passagiere. Die 46 spanischen Häfen verzeichneten einen Umschlag von 475 Millionen Tonnen an Waren. In Spanien existierten 2012 rund 180 Logistikanbieter. Die Anzahl der Beschäftigten in der Branche belief sich auf 19.000 Personen. Die sechs größten Logistikzentren Spaniens sind Madrid mit einer Fläche von 5,9 Mio. qm, Barcelona (5,2 Mio. qm), Zaragoza (5 Mio. qm), Valencia (1,3 Mio. qm) sowie Sevilla und Málaga. Neben den großen Zentren gibt es landesweit
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
weitere multimodale Logistikzentren. Interessant sind ferner die Inlandshäfen (puertos secos), wie Madrid und Zaragoza, mit Anschluss an die Küstenhäfen. Rund 90% des gesamten Containerumschlags im Lande werden über die Häfen Algeciras, Barcelona, Bilbao und Valencia abgewickelt. Gemäß "Logistic Performance Index 2012", einer Untersuchung der Weltbank über die Leistungsfähigkeit des Logistiksektors in 155 Ländern, nimmt Spanien im Gesamtranking den 20. Platz ein. Bewertet werden unter anderem die Logistikinfrastruktur und -effizienz, die Abwicklung von Zollformalitäten sowie Pünktlichkeit. Die günstige geographische Lage reduziert die Lieferzeiten an die Produktionsstandorte, was besonders bei den immer kundenspezifischeren Produkten erforderlich ist. Spanien bietet außerdem die Nähe zu den Drittmärkten Portugal und Nordafrikas. Industrietradition und starke technologische Basis Bestimmte spanische Regionen, vor allem in Nordspanien (Asturien, Baskenland, Kantabrien und Katalonien), besitzen eine jahrzehnte- oder sogar jahrhundertelange Industrietradition. 71,6% der in Spanien erfassten Subcontracting-Unternehmen nahmen vor 1985 ihre Tätigkeit auf und 94,9% weisen spanisches Kapital auf. Heute existieren über 80 moderne Technologieparks mit über 6.000 dort angesiedelten Unternehmen. Qualitätssicherung und Verlässlichkeit der spanischen Lieferanten Rund zwei Drittel der Zulieferer verfügen über Qualitätszertifikate (z.B. ISO9000) und rund 42% müssen außerdem spezifische Qualitätskriterien des Produzenten erfüllen. Ein Viertel der Unternehmen verfügen über Umweltzertifikate z.B. ISO14000. Am Beispiel des Automobilsektors sieht man das Vertrauen, das ausländische Produzenten den spanischen Zulieferern entgegenbringen. Spanien ist nach Deutschland zweitwichtigster Produktionsstandort des Automobilsektors in der EU. Auch zukünftig investieren deutsche, französische und amerikanische Hersteller in den Produktionsstandort Spanien, nachdem die Gesamtausgaben bereits zwischen 2006 und 2012 mehr als 6 Mrd. Euro betragen haben dürften. Allein 2012 und 2013 wurden neue Projekte bekanntgegeben, die mit den laufenden Vorhaben zusammen ein Volumen von rund 3 Mrd. Euro erreichen. Hiervon entfallen auf Seat und Volkswagen jeweils 0,8 Mrd. Euro, auf IVECO und Mercedes-Benz je 0,5 Mrd. Euro sowie auf Nissan 0,4 Mrd. Euro. Hierbei handelt es sich unter anderem um die Ausrichtung der Produktionsanlagen auf neue Modellreihen beziehungsweise um Modernisierungen bestehender Fertigungsbereiche. Zu diesen Aktivitäten sind vier weitere Konzernankündigungen hinzuzurechnen, die teils mit internen Umstrukturierungen und Neuausrichtungen verbunden sind. So plant Ford, die Fertigung vom belgischen Standort Gent nach Almufasses in Valencia zu verlagern. Dort soll unter anderem der Mondeo hergestellt werden. Seitens PSA Peugeot Citroën wurde bekannt, dass die Gruppe in ihren spanischen Werken mindestens zwei neue Modellreihen bauen wird. Außerdem erhielt die Produktionsstätte von General Motors (GM) den Zuschlag für den neuen Opel Corsa. Schließlich verlautete von Renault, dass der firmenintern genehmigte "Plan Industrial" die Schaffung von 1.200 neuen Arbeitsplätzen beinhaltet.
Sprachliche und kulturelle Nähe zu Latein- und Mittelamerika Spanien gilt als Sprungbrett zu neuen strategischen Märkten mit Millionen von neuen potentiellen Abnehmern in den aufstrebenden Märkten Latein- und Mittelamerikas. Spanien ist als Anbieter von Dienstleistungen hervorragend positioniert. Breites Angebot an Arbeitskräften mit höherer Ausbildung Die Erwerbspersonen folgendes Ausbildungsniveau auf: (Angaben in 1.000 Personen): 3.280.000 Primärstufe, 12.062.000 Sekundarstufe oder Lehre, 7.412.000 Post-Sekundarstufe (davon 2.314.000 höhere technische Berufe und 5.098.000 Universitätsstufe. Damit verfügen 22,2 % der Erwerbspersonen über einen Universitätsabschluss.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
Top-Unternehmen in den strategischen Wirtschaftssektoren
Sektor Firma Mitarbeiter Jahresumsatz
in Mrd. €
Energie Cepsa 3.112 25,0
Energie Repsol Petróleo 3.575 19,6
Energie Endesa Energía 904 10,4
Energie E.ON 1.300 1,0
Energie Vestas Eólica 572 0,4
Energie BP Europe 9.918 0,3
Fahrzeugtechnik Seat 11.394 5,1
Fahrzeugtechnik Navantia 5.511 1,2
Fahrzeugtechnik Iveco 3.949 1,2
Fahrzeugtechnik Peugeot Citröen 10.064 5,1
Fahrzeugtechnik Renault 10.117 5,0
Fahrzeugtechnik Volkswagen 4.927 3,2
Metall/Maschinenbau Acerinox 2.300 1,4
Metall/Maschinenbau CELSA 1.119 1,1
Metall/Maschinenbau Cunext Copper Industries 114 1,0
Metall/Maschinenbau ArcelorMittal 6.780 2,6
Metall/Maschinenbau Gerdau Aceros Especiales 2.900 0,9
Metall/Maschinenbau Thyssenkrupp Elevadores 2.979 0,5
Elektronik/IT/IKT/Elektrotechnik INDRA 12.034 1,7
Elektronik/IT/IKT/Elektrotechnik INSA 2.650 0,1
Elektronik/IT/IKT/Elektrotechnik Vodafone 4.300 6,0
Elektronik/IT/IKT/Elektrotechnik Nokia Spain 106 0,9
Elektronik/IT/IKT/Elektrotechnik LG Electronics España 420 0,8
Chemie /Pharma / Kunststoff Michelin España Portugal 8.000 2,7
Chemie /Pharma / Kunststoff Fertiberia 872 0,8
Chemie /Pharma / Kunststoff Merck Sharp & Dohme 583 0,8
Chemie /Pharma / Kunststoff Lilly 1.217 2,7
Chemie /Pharma / Kunststoff Dow Chemical Ibérica 701 1,4
Chemie /Pharma / Kunststoff Pfizer 1.200 1,2
Lebensmittel / Getränke Corp. Alimentaria Guissona 3.185 1,3
Lebensmittel / Getränke Mahou 1.325 0,8
Lebensmittel / Getränke Corp. Alimentaria Peñasanta 1.400 0,8
Lebensmittel / Getränke Nestlé 6.000 1,4
Lebensmittel / Getränke Danone 1.600 1,1
Lebensmittel / Getränke Heineken España 1.774 1,0
Dienstleistungen/TK Telefonica de España 28.121 17,3
Dienstleistungen/TK Vodafone España 4.300 6,0
Dienstleistungen/Logistik Iberia 19.878 4,6
Dienstleistungen/Logistik Kuehne & Nagel 1.124 0,4
Dienstleistungen/Bank Grupo Banco Santander 33.151 0,7
Dienstleistungen/Bank Deutsche Bank 98.219 2,2
Dienstleistungen/Handel Mercadona 70.000 16,4
Dienstleistungen/Handel Carrefour 32.000 8,1
Textil Inditex 1.346 4,8
Papier Grupo Lecta 1.877 0,8
Papier SAICA 624 0,8
Elektronik / IT/ IKT / Elektrotechik
CAF POWER & AUTOMATION, S.L.U.CASADO MARTINEZ, S.L.
Kunststoff / Chemie / Pharma
ARIES INDUSTRIAS DEL PLÁSTICO, S.A.CREACIONES Y DISEÑOS PLÁSTICOS, S.L. (CREDIPLAST)ESBELT, S.A.MOLDEADOS TECNICOS PLASTICOS, S. A. (MOLTEPLAS)PEREZ LINARES S.L.PINTURAS MACY, S.A.POLIURETANOS RIVAS, S. A.PROINDIVER, S.L.ZATEC, S.A.
Ausgewählte spanische Lieferanten
Maschinenbau / Metallbearbeitung
AMPO FOUNDRYBETSAIDE, S.A.L.CENTRICAST, S.A.CLASS MANUFACTURING, S.A.CONSTRUCCIONES METÁLICAS ESPECIALES STB ASTUR, S.A.ENGRANAJES GRINDEL, S.A.L.FABRICADOS HIDRÁULICOS Y MECÁNICOS, S.L. (FAHIME)FABRICACIÓN Y MANTENIMIENTO S.A.U. (FAYMASA)FORBRASS, S.A.FUNDICIONES AIZPURUA, S.AFUNDICIONES Y MATRICERÍA S.L (FUYMA)GALVATEC, S.L.INDEMESA, S.L.INDUSTRIAS GARITA, S.L. INDUSTRIAS GES, S.A.INDUSTRIAS MECÁNICAS MICROLAN ,S.L.JP INDUSTRIAS MECANICAS, S.L.KUZU, S.L.MAIN-METALL ESPAÑOLA, SLMECALTEC HISPANIAMECANIZADOS Y OXICORTES, S.L.MECAPAL, S.L.MEIN Funcasa, S.A.NAGAMOHR, S.A.PASCUAL CHURRUCA, S.A.PRECIMECAN, S.L.RCB S LSEGURA HERMANOS, S.A.STERN HIDRAULICA, S.A.TECNICHAPA SLUUGARTEBURU, S.A.UNIEX BERRI S.L. (AUXIN GROUP)UTIL VIGO, S.L.
Dienstleistungen / Engineering / Logistik
LKS INGENIERIA, S.COOP, DIARADESIGN
Lebensmittel / Getränke
DISFASA, S.A.
Sonstige / Verpackung
GRUPO ALBERT 2000, S.L.
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME AMPO FOUNDRY
OFFICES
Address Barrio Katea S/N E - 20213 Idiazabal (Gipuzkoa)
GENERAL INFORMATON
Tel. +34 943 188 000 Fax +34 943 188 130 E-mail ampo@ampo.com Web www.ampo.com
Total surface (m2) 90.000
Covered surface (m2) 44.275
Founded in 1964
Turn over 150 M.€ aprox. Employees 700
Export rate 95% DUNS number 461005258
CONTACT
Contact person Maite Sainz (Area Sales Manager)
Languages Spanish, English, German, French, Italian
E-mail Tel.
msainz@ampo.com +34 659 404 768
ACTIVITIES
Company Description
AMPO is a leading foundry with technological expertise and experience in sectors with demanding requirements, such as offshore, LNG, mining, etc. AMPO is an expert in stainless steel, duplex & superduplex and high alloy castings. End users such as BP, Shell, Exxon Mobil, Saudi Aramco and Chevron, as well as the main valve manufacturers have placed their trust in AMPO.
Customer Markets
Oil & Gas
Chemical & Petrochemical
Mining
Energy
Specialty industries
Offshore
Subcontracting Activities/ Product offer The company’s product knowledge and capacity for working with special materials places it in a privileged situation from where it can offer the highest level of customer service. Moreover, it has the capacity to work with large-size parts and to deliver fully machined components in different phases, with total control over the process.
Main products
Valve components
Hydraulic components
Pump components
Spun Cast tubes
CERTIFICATIONS
ISO 9001
NORSOK
PED TÜV, ABS, BUREAU VERITAS, DNV, G.LLOYD, KOREAN REGISTER, LLOYDS, NKK, STATOILHYDRO
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME BETSAIDE, S.A.L
OFFICES
Address Betsaide 1 E – 48320 Elorrio (Bizkaia)
GENERAL INFORMATON
Tel. +34 94 658 45 60 Fax +34 94 658 45 61 E-Mail comercial@betsaide.com Web www.betsaide.com
Total surface (m2) 34.000
Covered surface (m2)
Founded in 1989
Turn over: 60 million € Employees 325
Export rate: 75 % DUNS number: 46 458 04 14
CONTACT
Contact person Juan Ramón García Cía (Key Accounter Sales)
Languages Spanish, German, English, French
E-mail Tel.
jrgarcia@betsaide.com +34 94 658 45 60
ACTIVITIES
Company Description
DISAMATIC Iron Foundry / Spheroidal & ADI Iron Castings: raw & finished parts; range of part weights: from 150 gr. up to 20 Kg; Technologies: 4 DISAMATIC vertical sand molding lines, mold dimensions: 650x 535 mm, own core building shop (Cold & Hot Box), In-house Automatic grinding machines; Advanced co-engineering: Design (CATIA V5) and casting simulations (MAGMASOFT), In-house rapid prototyping, In-house pattern shop.
Customer Markets
Automotive (car & truck)
Land machinery & Off Highway vehicles
Water & gas Valve Components
Railway industry
Elevator industry
Building industry
Subcontracting Activities/Product offer
Heat treatments
High-precision machining
Superficial Coatings: cataphoresis, epoxy paintings, zinc coating
Main products
Differential & valve housings
Transmission & steering yokes
Engine brackets
Shift forks
CERTIFICATIONS
ISO TS16949:2009 (TÜV-Rheinland)
DIN - EN - ISO 9001:2008 (TÜV-Rheinland)
AD - 2000 MERKBLATT WO/TRD 100 (TÜV- Rheinland)
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME CENTRICAST, S.A.
OFFICES
Address Zudibiarte, 21 E – 01409 Okondo (Alava)
GENERAL INFORMATON
Tel. +34 945 89 80 42 Fax +34 945 89 80 56 E-mail centricast@centricast.com Web www.centricast.com
Total surface (m2) 1.500
Covered surface (m2) 1.500
Founded in 1997
Turn over 2 million € Employees 12
Export rate 70% DUNS number
CONTACT
Contact person Joseba Urrutxua Echevarria (General Manager)
Languages Spanish, German, English
E-mail Tel.
urrutxua@centricast.com +34 618 193 447
ACTIVITIES
Company Description
Centricast, S.A. is a young company with 15 years in the market and with experienced people in the sector. It´s a foundry which produces tubes in an innovative way, called centrifugal casting, with a clean technology avoiding gaseousus contamination and other emissions. The centrifugal casting process brings cost reduction in front of the traditional bar.
Customer Markets
Steelworks / Foundries
Heat treatments
Heavy industry
Engine blanks
Pumps and Valves
Subcontracting Activities/ Product offer
PRODUCT:
Centrifugal Casting Tubes
Seamless Casting Tubes
Grey Iron Casting tubes MATERIALS:
Ferritics
Refractaries
Stainless and Carbon Steels
Grey Iron
Bronze
Main products
Rings and Bushes
Liners
Machined Tubes
CERTIFICATIONS
EN ISO 9001-2008
AD-MERKBLATT 97/23/EC for pressure equipment
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME CLASS MANUFACTURING, S.A.
OFFICES
Address Urano, 2 Polígono Industrial No.2 La Fuensanta E – 28936 Móstoles (Madrid)
GENERAL INFORMATON
Tel. +34 91 685 38 06 Fax +34 91 645 62 80 E-mail pablo.arroyo@classmf.es Web www.classmf.es
Total surface (m2) 6.400
Covered surface (m2) 6.400
Founded in 1969
Turn over 11.2 million € Employees 98
Export rate 92% DUNS number A28223691
CONTACT
Contact person Pablo Arroyo (Comercial Manager)
Languages Spanish, English
E-mail Tel.
Pablo.arroyo@classmf.es +34 687 658 917
ACTIVITIES
Company Description
Original equipment manufacturer (OEM) which provides services to companies that want to outsource the manufacturing of its products. Specialized in the production of complex sheet metal parts, complex sheet metal assemblies and assemblings of mechatronic modules in a large range of finishings (powder coating, zinc, cataphoresis, etc.). Offer of design and prototyping service according to customer needs. More than a 90% of the production is exported worldwide and manufactured under the highest quality standards.
Customer Markets
Industry
Telecommunications
Energy saving
Climatization
Metal furniture
Subcontracting Activities/ Product offer
Metal sheet punching (0,5 – 6 mm.)
Metal laser cutting (0,5 – 6 mm.)
Hydraulic pressing (250 Tn.)
Metal sheet bending (0,5 – 6 mm.)
Welding
Electromechanical Assemblings
Design and prototyping
Powder coating lines
Main products
Metal cabinets
Heat exchangers
Evaporators
Ventilation units
CERTIFICATIONS
ISO9001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME CONSTRUCCIONES METALICAS ESPECIALES STB ASTUR, S.A. (STB ASTUR, S.A.)
OFFICES
Address Calle Marcelino Camacho, 4 Polígono Industrial Somonte II E – 33393 Gijón (Asturias)
GENERAL INFORMATON
Tel. +34 985 30 38 98 Fax +34 985 30 38 34 E-mail alessandro.barzaghi@stbastur.com Web www.stbastur.com
Total surface (m2) 14.300
Covered surface (m2) 4.000
Founded in 2005
Turn over 3 million € Employees 30
Export rate 70% DUNS number
CONTACT
Contact person Alessandro Barzaghi (General Manager)
Languages Spanish, English and Italian
E-mail Tel.
Alessandro.barzaghi@stbastur.com +34 985 30 38 98
ACTIVITIES
Company Description
The Production of STB ASTUR covers a wide range of products, principally steelworks for the Oil, Gas, Chemical, Power Generating Industries and Waste Heat Recovery Systems. STB ASTUR, with his own personnel and engineers, produces with CAD and 3D modelling CAD system, shop an erection drawings and can also provide structures calculations according to Eurocode, Aisc and other norms.
Customer Markets
Petrochemical
Chemical
Energy
Oil
Gas
Subcontracting Activities/Product offer
Galvanizing
Main products
General steelworks for heaters, boilers and furnaces
Convection and radiant sections
Ducts, stacks, platforms and ladders
Dampers and guillotines
Tube sheets
Internals for steam drums
CERTIFICATIONS
Quality Management ISO 9001:2008
Quality Management UNE EN 1090-1: 2011+A1:2012
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME ENGRANAJES GRINDEL, S.A.
OFFICES
Polígono Industrial Arriaga, 7 E – 20870 Elgoibar-Gipuzkoa
GENERAL INFORMATON
Tel. +34 943 74 82 01 Fax +34 943 74 05 46 E-mail grindl@grindelgears.com Web www.grindelgears.com
Total surface (m2) 3.356 Covered surface (m2) 3.356 Founded in 1966
Turn over 6.161.063 € Employees 55
Export rate 70% DUNS number
CONTACT
Contact person Jorge Sanz Aguirre (Export Manager)
Languages Spanish, English, French
E-mail Tel.
export@grindelgears.com +34 943 74 82 01
ACTIVITIES
Company Description
GRINDEL, a leading company in the transmission elements sector, specialises in the production of high quality gears and splined shafts, adapting to customer requirements according to plans or samples. We are involved in small and medium-sized production: ranging from lots of 1 unit to several thousand a year. Our core competente is the production of ground gears.
Customer Markets
Cranes
Pumps
Machine Tools
Construction and agricultural equipment
Others (Robotic, Textil machinery, Transmissions, Gear boxes, Train industry…)
Subcontracting Activities/ Product offer
Complete and Partial construction of Gear Wheels and Pinions.
Grinding of Wheels and Pinions
Shaving of External shaving of external spur and helical gears.
Cutting / Hobbing of Wheels and Pinions
Ground Splined Shafts
Milled Splined Shafts
Cutting of internal Straight Gears in finishing stage
Main products
Cylindrical, straight and helical gears
Splined shafts
Gears with internal straight teeth and others
CERTIFICATIONS
Quality Management ISO 9001
Environmental Management ISO 14001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME FABRICADOS HIDRÁULICOS Y MECÁNICOS, S.L.
OFFICES
Address Polígono de Logrezana Ctra. AS-110, km 7,8 E - 33438 Carreño (Asturias)
GENERAL INFORMATON
Tel. +34 985 515 255 Fax +34 985 515 765 E-mail info@fahime.com Web www.fahime.com
Total surface (m2) 16.000
Covered surface (m2) 8.000
Founded in 1984
Turn over EUR 15 Mill Employees 115
Export rate 90% DUNS number 513095158
CONTACT
Contact person Rafael Felgueroso (Foreign Trade Dep.)
Languages Spanish, English
E-mail Tel.
rafa@fahime.com +34 985 515 255
ACTIVITIES
Company Description
FAHIME is a company dedicated to the manufacturing of Capital Goods specialized in sectors: Hydro Power, Mechanics, Wind Power (Offshore), Mining, Chemistry and BTM. We achieve our work, based on the engineering developed for our customers, according to the drawings and technical specifications supplied by them. Our technical department is perfectly qualified to adapt to any needs, and prepared to move the information received with precision and quality to our workshops.
Customer Markets
Hydro Power
Mechanics
Wind Power, Offshore
Mining
Chemistry
Nuclear
BTM
We are working for some leading engineering companies from Europe and North America as: ALSTOM, ANDRITZ, GE, VOITH Groups
Subcontracting Activities/ Product offer
Welding and boiling.
Machining and adjustment.
Assembly and testing.
Quality control.
Metrology.
Surface treatment.
Packaging and logistics.
Main products
Francis, Kaplan, Pelton and Bulb Turbines
Distributors: HC/BR/OP/WG
Spiral cases, Stay rings.
Housing, Draft tubes, Cones.
Valves: Butterfly, Spherical.
Pelton Distributors and Nozzles
Genarator Stator Frames, Rotors.
CERTIFICATIONS
ISO 9001:2008
EN ISO 3834-2
AD 2000-Merkblatt HP0
PED 97/23/EC
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME FABRICACIÓN Y MANTENIMIENTO S.A.U. (FAYMASA)
OFFICES
C/ Francia, 2 E – 34004 Palencia (Palencia)
GENERAL INFORMATON
Tel. +34 979 71 17 14 Fax +34 979 73 05 57 E-mail info@faymasa.com Web www.faymasa.com
Total surface (m2) 7.400
Covered surface (m2) 4.260
Founded in 1989
Turn over 3.9 million € (2012) Employees 69
Export rate 13.11% (2012) DUNS number 466708104
CONTACT
Contact person Elena González (Project Management) Javier Pelayo (Project Management)
Languages Spanish, English, French, Spanish, English, German
E-mail Tel.
elena.gonzalez@faymasa.com javier.pelayo@faymasa.com +34 608 77 88 79 +34 636 853 883
ACTIVITIES
Company Description Faymasa is specialized in engineering, machining, manufacturing and assembling of machines and equipment. We have experience manufacturing not only special machines and specific equipments but also palletized and handling systems with robot or without it.
Subcontracting Activities/ Product offer DESIGN, CUTTING, WELDING (steel, stainless steel, aluminum, etc.), Machining (Milling Machines, Turning Machines, Grinding Machines), ASSEMBLY, AUTOMATION, 3D MEASUREMENT.
Customer Markets Automotive, Machine Tool, Food Industry, Concrete, Aeronautics.
CERTIFICATIONS
ISO 9001, ISO 14001.
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME FORBRASS, S.A.
OFFICES
Address Polígono Industrial Erletxe Plataforma J, Edificio 1, Nave 1 E – 48960 Galdakao (Bizkaia)
GENERAL INFORMATON
Tel. +34 94 600 91 38 Fax +34 94 600 90 72 E-mail info@forbrass.com Web www.forbrass.com
Total surface (m2)
Covered surface (m2)
Founded in 1993
Turn over 12 million € Employees 35
Export rate 20 % DUNS number
CONTACT
Contact person Pablo Alonso (Managing Director)
Languages Spanish, English, French, German
E-mail Tel.
deutschland@forbrass.com +34 94 600 91 38
ACTIVITIES
Company Description
FORBRASS S.A. is a company specialized in the forging and hot-stamping of non-ferrous metals. FORBRASS develops technologically advanced techniques for hot-forging processes in order to offer our customers "all-inclusive solutions", using total quality and innovation as tools for developing relations with our clients and ensuring their loyalty. FORBRASS has medium-tonnage presses and all the necessary additional machinery to enable us to offer the best possible product to each of our clients.
Customer Market
Automotive
Electrical Appliances
Taps and Bathroom Appliances
Metal Fittings for Windows and Doors.
Fluid Control - Fittings
Food Industry
Fire-Protection Systems
Water – Transport and Distribution
Electricity - Transport and Distribution
Gas - Transport and Distribution.
Subcontracting Activities/Product offer
ELECTROLYTE PLATING
silver-plating
tin-plating
anodizing
Main products
Fittings
Gas valves
Battery clamps
Water connectors
Aluminium / Cupper
CERTIFICATIONS
ISO 9001:2008 quality certificate from SGS.
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME FUNDICIONES AIZPURUA, S.A.
OFFICES
Address Polígono Aranguren 7 E - 20180 Oiartzun (Gipuzkoa)
GENERAL INFORMATON
Tel. +34 943 490 288 / 943 491 288 Fax +34 943 492 908 E-mail aizpurua@aizpurua.com Web www.aizpurua.com
Total surface (m2) 3.500
Covered surface (m2) 2.800
Founded in 1958
Turn over 6 million € Employees 25
Export rate 30% DUNS number
CONTACT
Contact person Igor Olagüe (General Manager)
Languages Spanish, English, French, Italian, German
E-mail Tel.
aizpurua@aizpurua.com +34 943 490 288 / 94 349 12 88
ACTIVITIES
Company Description
Its production is exclusively concentrated on bronze and high resistance brass, using CENTRICASTING. Since it began, its main objective has been to constantly upgrade quality, which has allowed it to meet the constant growth in the needs of its clients.
Subcontracting Activities/ Product offer
Centricasting, proof- and finish-machining.
Weight 2500kg max.
Sizes ø30-ø2250mm
Crowns for industrial and lift reducers / Headstock spindle nuts / Sleeves-bushings
Customer Markets
Industrial and lift reducers
Siderurgy
Solar energy
Mining
CERTIFICATIONS
ISO 9001:2008
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME FUNDICIONES Y MATRICERÍA S.L. (FUYMA)
OFFICES
Address C/ Tenerife 30 E - 28970 Humanes (Madrid)
GENERAL INFORMATON
Tel. +34 91 697 73 25 Fax +34 91 615 95 92 E-mail fuyma@fuyma.com Web www.fuyma.com
Total surface (m2) 4.000
Covered surface (m2) 3.700
Founded in 1987
Turn over 6 - 7 million € Employees 50
Export rate 40% DUNS number
CONTACT
Contact person Felix Arias (General Manager)
Languages Spanish, English
E-mail felixarias@fuyma.com Tel. +34 91 697 73 25
ACTIVITIES
Company Description
Specialized in high pressure die casting of aluminium, zinc and brass. We develop our own molds and toolings, advise about mass removals and design improvements, carry out filling and cooling down simulations. We are pioneers in the aluminium high pressure die casting by melting with induction furnaces and able to carry out at our facilities processes such as shotblasting, vibratory treatment, leak tests.
Customer Markets
Agriculture
Automotive
Lightning
Fire extinguising
Subcontracting Activities/Product offer
Machining
Painting
Impregnation
Cathodic
Main products
Housings
Manifolds
Covers
Brackets
CERTIFICATIONS
ISO 9001:2008
ISO / TS 16949:2009
Maschinenbau / Metallbearbeitung
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME GALVATEC, S.L.
OFFICES
Address C/ Juan Olivert 22, P.E. Aeronáutico E - 41300 La Rinconada (Sevilla)
GENERAL INFORMATON
Tel. +34 954 115 026 Fax +34 954 115 027 E-mail galvatec@galvatec.es Web www.galvatec.es
Total surface (m2) 5.500
Covered surface (m2) 5.500
Founded in 2004
Turn over 9 million € Employees 155
Export rate 7% DUNS number
CONTACT
Contact person Francisco de la Vega (Director)
Languages Spanish, English
E-mail Tel.
Francisco.delavega@galvatec.es +34 666 593 451
ACTIVITIES
Company Description
GALVATEC is a growing company founded in 2004. We are 100% focused on Aeronautic work-packages, specialised on Machined and Turned parts, NDT, Surface Treatments and Sub-assemblies. We are currently looking for new customers, mainly in Europe. We offer a build-to-print full management from raw material commissioning to delivery of finished parts.
Customer Markets
Aeronautic Structures TIER 1
Subcontracting Activities/ Product offer
A
Machining and Turning
Surface Treatments
Sub-Assemblies B
Machined Aeronautic Parts
Turned Aeronautic Parts
Aeronautic Sub-Assemblies
Main products
Boeing 737 rudder fittings
Airbus A380 HTP Turned Parts
Parts and Small assemblies for A320, A330, A350, A380, B737, B777, B787, Embraer, Eurofighter, etc.
CERTIFICATIONS
EN9100
PRI-NADCAP
ISO14001
Airbus, Boeing, Embraer
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME INDEMESA, S.L.
OFFICES
Address Pol. Ind. Bankunión I, C/ Bazán parcela 82-84 E - 33211 Tremañes (Gijón)
GENERAL INFORMATON
Tel. +34 985 30 86 86 Fax +34 985 30 83 06 E-mail indemesa@indemesa.com Web www.indemesa.com
Total surface 8.000 m2
Covered surface 8.000 m2
Founded in 1984
Turn over 5.08 million € (2012) Employees 35
Export rate 90% DUNS number 466698826
CONTACT
Contact person Daniel E. Diego Liedo (CEO)
Languages Spanish, English
E-mail Tel.
+34 985 30 86 86
ACTIVITIES
Company Description
Drums, Reactors, Stripper columns, Vacuum columns, Dryers, Regenerators, Structure and conveyor belts, Storage tanks/silos/hoppers, Scrubbers/Absorbers, Skids/Piping/Ducts, Gas & water coolers, Heat exchanges & electrofilters, Machinery and pieces for naval construction.
Subcontracting Activities/Product offer
Machining, Laser cutting, END, Painting, Transports, Packaging, Galvanizing.
Customer Markets
Refinery, Energy, Petrochemical, Gas storage, Ironworks, Cement, Chemical, Paper, Off-shore, Fertilizers, Natural gas, Naval, Industrial gases, Logistics
CERTIFICATIONS
ASME U and S, Repro, ISO 9001, ISO 14001, ISO 18001, ISO 3834-2, AD- Merkblatter HP0, Repsol, Sabic IP, Takreer We are working on EN 1090-1
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Industrias Garita, S.L.
OFFICES
Address Poligono industrial Eitua, nº33 E – 48240 Berriz (Vizcaya)
GENERAL INFORMATON
Tel. +34 946 826 530 Fax +34 946 225 233 E-mail lander.etxebarria@garita.net Web www.garita.net
Total surface (m2) 8.000
Covered surface (m2) 6.700
Founded in 1965
Turn over 20 million € Employees 80
Export rate 40% DUNS number 461129801
CONTACT
Contact person Lander Etxebarria
Languages Spanish, English, German, French.
E-mail Tel.
Lander.etxebarria@garita.net +34 670 665 007
ACTIVITIES
Company Description Industrias Garita provides the manufacture of a range of pressed parts from a simple blank and pierce to complicated deep drawn and fully assembled components, welding, machining and sub-assembly.
Customer Markets
Automotive industry
Subcontracting Activities/ Product offer
A Surface finishes
Cathaphoretic E-coat
Phosphating
Zinc plating
Heat treatment
Main products
Metal Sheet Stamped parts and sub-assemblies for vehicles:
Seatings
Steering columns
IP’s Car Cross Beam
Braking
Pedal box
Suspension
Transmissions
CERTIFICATIONS
ISO/TS 16949:2002 ISO 9001:2000
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME INDUSTRIAS GES, S.A.
OFFICES
Address Ctra. Algete Al Casar de Talamanca km.6 E-28130 Valdeolmos (Madrid)
GENERAL INFORMATON
Tel. +34 916 202 240 Fax +34 916 202 051 E-mail sprecher@industriasges.com Web www.industriasges.com
Total surface (m2) 3.400
Covered surface (m2) 2.600
Founded in 1982
Turn over 5 million € Employees 40
Export rate 50% DUNS number 468719372
CONTACT
Contact person Sprecher Valetin (General Manager)
Languages Spanish, English
E-mail Tel.
sprecher@industriasges.com +34 916 202 240
ACTIVITIES
Company Description
Family business leading industrial supplier for precision stamping components with press capacity up to 125 Tm. Short runs and very high volumes. Secondary process like Riveting, Welding and Tapping include.
Customer Markets
Automotive industry
Trucks, industrial vehicles.
Subcontracting Activities/ Product offer
Stamping
Stamping
Bruderer
Bihler
Welding
Tapping
Prototypes
Main products
Brackets
Clamps
Washer
Connectors
CERTIFICATIONS
Quality Management ISO TS16949
Environmental Management ISO 14001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME INDUSTRIAS MECÁNICAS MICROLAN, S.L.
OFFICES
Address Pol. Ind. Areta C/ Bideberri, 2B E- 31620 Huarte (Navarra)
GENERAL INFORMATON
Tel. +34 948 361 036 Fax +34 948 361 037 E-mail jetxeberria@microlansl.com Web www.microlansl.com
Total surface (m2) 1.200
Covered surface (m2) 1.200
Founded in 2004
Turn over 1.6 million € Employees 23
Export rate 16 % DUNS number ES B31816234
CONTACT
Contact person Mr. Javier Etxeberria (General Manager)
Languages Spanish, English, German, French
E-mail Tel.
jetxeberria@microlansl.com +34 948 361 036
ACTIVITIES
Company Description
Industrias Mecánicas Microlan SL is a company that does precision machining according to drawing of small and medium batches made in all kinds of materials. Production resources: Turning in 4 axis up to ø 400 mm; milling in 3 &4 axis up to 1.600 x 700 mm; machining centers with 5 axis up to 760 x 600 mm; control and measurement with 2 coordinates systems zeiss contura up to 1.600 x 1.000 mm; scanning + c.a.d. (using gibbs-cam).
Customer markets
E.E.C. countries
Subcontracting Activities/ Product offer
Machined parts according to customer drawing
Main products
Machined parts mainly for Automation
Eolic Energy
Aircraft
Mechanical Holding Devices
Hydraulic
CERTIFICATIONS
UNE EN 9100-2009
ISO 9001-2008
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME JP INDUSTRIAS MECANICAS, S.L.
OFFICES
Address Ctra. De Besullo Km. 1,4 Aptdo. De Correos Nº 20 E - 33800 Cangas Del Narcea (Asturias)
GENERAL INFORMATON
Tel. +34 985 81 08 68 Fax +34 985 81 00 49 E-mail info@jpim.es Web www.jpim.es
Total surface (m2) 12.000
Covered surface (m2) 3.600
Founded in 1951
Turn over 5 million € Employees 34
Export rate 10% DUNS number 462069504
CONTACT
Contact person Alberto Lopez (Technical Manager)
Languages Spanish, English
E-mail Tel.
alopez@jpim.es +34 985 81 08 68
ACTIVITIES
Company Description As from the 1970’s the company evolved to the design and manufacture of mechanical components for the car industry, public works, forest machinery and agricultural machinery. Actually, we develop all-in projects: gathering of initial data, design, programming, manufacture of own tools, manufacture of parts and assembly of units. Our main means of production are:
3 CNC horizontal machining centers (5 axes)
2 CNC vertical machining centers (3 axes)
5 CNC horizontal lathes
Auxiliary resources: gears and splined shafts
Cylindrical: module from 0.1 to 16, Dmax 1000 mm
Conical: Module from 0.5 to 10, Dmax 500
Interior: Module max 8, Dmax 400
Rectified cylindrical
Broached
Rectified splined shafts
Milled splined shafts
Main products
Differential axles
Transfer cases
Winches Reductors
Customer Markets
Automotive
Military
Railways
Naval
Pumps
Valves Subcontracting Activities/ Product offer On request, we carry out subcontracting services and manufacture of parts, mechanical components or sets in accordance with own or client specifications (shafts, gears, houses, supports, rail wheels) from different raw materials (forge, foundry, bar, etc.) and materials (steel, iron, aluminum).
Forge
Foundry
Steel
Iron
Aluminum
Machining
Heat treatment
Gear cutting
Verification and inspection
Shipping to customer Design, manufacture and assembly of mechanical sets (drive line components)
CERTIFICATIONS
ISO 9001:2008
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME KUZU, S.L.
OFFICES
Address Poligono Industrial Morea Sur 3º, Calle 2ª, Nave izda. E- 31191 Beriain (Navarra)
GENERAL INFORMATON
Tel. +34 948 312 237 Fax +34 948 312 342 E-mail kuzu@kuzu.es Web www.kuzudecoletaje.es
Total surface (m2) 1.100
Covered surface (m2) 1.100
Founded in 1985
Turn over 2.5 million € Employees 16
Export rate 15 % ES B31544968
CONTACT
Contact person Gonzalo Tadeo (Export)
Languages Spanish, English, German, French
E-mail Tel.
gtadeo@sercoex.net +34 943 272 800
ACTIVITIES
Company Description
Specialists in bar turning and machining of special parts in all kind of materials including particular assemblies under customer request.
Subcontracting Activities/Product offer
Bar turning from ø2 up to ø65 CNC fully equipped lathes with automatic bars feeding, double spindle, motorized tools, Y-axle, etc. Small and medium batches.
Customer Markets
E.E.C. countries
CERTIFICATIONS
ISO 9001-2000 ISO 14001-2004
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Main-Metall Española, SL
OFFICES
Address Polígono Industrial de Requejada, Z24 39312 Polanco
GENERAL INFORMATON
Tel. +34 942 82 59 00 Fax +34 942 82 59 06 E-mail info@main-metall.com Web www.main-metall.com
Total surface (m2) 15.000
Covered surface (m2) 3.500
Founded in 1968
Turn over Employees
Export rate DUNS number
CONTACT
Contact person Rosana Martin (Sales)
Languages Spanish, English, German
E-mail Tel.
rosana.martin@main-metall.com +34 942 82 59 00
ACTIVITIES
Company Description
Established originally as a foundry of non-ferrous alloys, Main-Metall has become a vertically integrated producer of a wide range of high-quality plain bearings and guiding elements.
Subcontracting Activities/Product offer
Bronze bearings, guide bushings, self-lubricating guiding elements, wear plates, washers, thrust bearings, high-speed bearings, bearing shells, customised solutions (tribology, non-ferrous alloys).
Customer Markets
Mechanical engineering, plastics machinery, construction equipment, earthmoving equipment, moulding and tooling, automotive, plant manufacturing industries.
CERTIFICATIONS
ISO 9001:2008
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Mecaltec Hispania
OFFICES
Address
Pol. Ind. de Barros, 22 nave 15 E - 39408 Barros (Cantabria)
GENERAL INFORMATON
Tel. +34 942 842 078 Fax +34 942 822 239 E-mail info@mecaltec.com Web www.mecaltec.com
Total surface (m2) 450 Covered surface (m2) 360 Founded in 2006
Turn over Employees 6
Export rate 15% DUNS number
CONTACT
Contact person Ángel González (General Manager)
Languages Spanish, English
E-mail Tel.
angel@mecaltec.com +34 942 842 078
ACTIVITIES
Company Description
Mecaltec Hispania is a spanish company founded in 2006. Using the most advanced technology combined with our large experience in CNC machinery provide special components as well as development and assembly of equipments for industry. We are an enthusiastic group of people which get together to share our knowledge and experience and offer them to our customers.
Subcontracting Activities/ Product offer
Machining (short, medium, big series), manufacture and assembly of machinery and industrial equipment, maintenance programs.
Customer Markets
Automotive industry, wind farms, food industry, energy, capital goods, industry
CERTIFICATIONS
Quality Management ISO 9001:2008
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME MECANIZADOS Y OXICORTES SL (MECOXI)
OFFICES
Address Rua Anel Do Perral nº2. Polig. Ind. Veigadaña E - 36416 Mos (Pontevedra)
GENERAL INFORMATON
Tel. +34 986 292 058 Fax +34 986 242 139 E-mail info@mecoxi.com Web www.mecoxi.com
Total surface (m2) 4.000
Covered surface (m2) 2.500
Founded in 1996
Turn over (office address) Employees 26
Export rate 5% of production DUNS number B36808434
CONTACT
Contact person Adolfo Maldonado (international business thechnical departamento) Manuel Castro (General Manager)
Languages Spanish and English.
E-mail Tel.
adolfomaldonado@mecoxi.com manuelcastro@mecoxi.com +34 986 292 058 677 464 218
ACTIVITIES
Company Description MECOXI is a company dedicated to the design and manufacture of industrial machinery sectors. We perform an integral manufacturing process and we give highest quality in our products.
Subcontracting Activities/ Product offer Design, Steel and inox cutting (laser, plasma and oxigas), CNC machining, boiler making, approved welding, hobbing, assembly. We make all types of hydraulic and pneumatic cylinders
Customer Markets shipbuilding, automobile ancillary companies, food companies
CERTIFICATIONS
IN PROCESS OF CERTIFICATION ISO-9001 and 14001 SCHEDULED DATE 30/06/2013
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME MECAPAL, S.L.
OFFICES
Address Bº Zubillaga, 77 E - 20560 Oñate (Gipuzkoa)
GENERAL INFORMATON
Tel. +34 943 716 235 Fax +34 943 716 234 E-mail mecapal@mecapal.es Web www.mecapal.es
Total surface (m2) 3.000
Covered surface (m2) 3.000
Founded in 1988
Turn over 3 million € Employees 36
Export rate 10% DUNS number ES B20180576
CONTACT
Contact person Gonzalo Tadeo (Export)
Languages Spanish, English, German, French
E-mail Tel.
gtadeo@sercoex.net +34 943 272 800
ACTIVITIES
Company Description
Dedicated to the precision CNC machining for several industrial sectors, including the supply of raw material, forging, casting, as well as the design and manufacture of the machining tools.
Subcontracting Activities/ Product offer
CNC lathes from 5 to 300 and machining centres up to 1.000 mm. Latest generation of vertical and horizontal CNC machining centres, automatic lathes and robotic transfer machines with 100% verification controls
Customer Markets
E.E.C. countries
CERTIFICATIONS
ISO 9001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME MEIN Funcasa, S.A.
OFFICES
Address Polígono Andoaga, s/n E - 20709 Ezkio-Itsaso (Gipuzkoa)
GENERAL INFORMATON
Tel. +34 943 725 541 Fax +34 943 725 416 E-mail mein@funcasa-mein.com Web www.funcasa-mein.com
Total surface (m2) 1.0000
Covered surface (m2) 8.000
Founded in 1942
Turn over 15 million € Employees 72
Export rate 60% DUNS number A48299515
CONTACT
Contact person (cargo) Juan Luis Plazaola (Technology Services coordinator)
Languages Spanish, English, French
E-mail Tel.
jlplazaola@funcasa-mein +34 639 661 898
ACTIVITIES
Company Description
Fundición en Cáscara, S.A. MEIN is a steel foundry which over the years has specialised in the production of high or low alloy iron and steel castings (white alloy, carbon steel, stainless, wear resistant, abrasion resistant, refractory, etc.) in medium and large batches. The unitary weight of the pieces ranges from 1 kg to 2000 kg. The annual capacity is in the region of 4000 tonnes. Production Facilities
Melting: 2 MF Induction furnaces each one with two vessels of 2tn capacity
Moulding: 3 shell moulding machines. Max size 1000x1000 mm. Max casting weight 150 kg, 1 no bake (furan sand) moulding line. Max size 2500x2500mm. max casting weight 2000 kg
Heat treatment: 2 heat treatment furnaces (1 gas heated, 1 electric). Max capacity 6000 kg each.
Subcontracting Activities/Product offer
We can supply finished castings by outsourcing following activities: Machining, priming, painting, galvanizing, welding, assembly, testing (destructive and non-destructive).
Customer Markets
Quarries and Mining, Oil and Gas, Hydro Energy, Transport, Construction, Pulp and Paper, Cement Industry, Farming Machinery, Industrial Equipment.
CERTIFICATIONS
Quality Management ISO 9001:2008
Manufacturer approval by DNV (Det Norske Veritas)
AD2000 Merkblatt. W0/TRD 100 by TÜV
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME NAGAMOHR, S.A.
OFFICES
Address: Calle Diseño, 9 Polígono Industrial “Los Olivos” E – 28906 Getafe (Madrid)
GENERAL INFORMATON
Tel. +34 91 601 02 74 Fax +34 91 681 84 40 E-mail info@nagamohr.com Web www.nagamohr.com
Total surface (m2) 4.735
Covered surface (m2) 3.804
Founded in 1993
Turn over 9.2 million € Employees 85
Export rate 30% DUNS number 471985143
CONTACT
Contact person Maribel Herrera Melendo (Sales Manager)
Languages Spanish, English, German
E-mail Tel.
m.herrera@nagamohr.com +34 91 601 02 74
ACTIVITIES
Company Description
Nagamohr is a company dedicated to high precision turning, specialized in complex shafts. Born out of the transfer of a small production centre from Germany to Spain in 1993, it has developed since into a company with nearly 100 employees, an annual production of more than 20 million shafts and turnover of approximately 10 M€. Nagamohr is specialized in the production of large series:
Solid and hollow transmission shafts
Shafts for electrical motors
Shafts for distribution boxes
Stainless steel shafts and valves for gas recirculation system
These shafts are used in wiper systems, electric window lifts, motorized seat adjustments and sunroofs, powertrain systems, exhaust air systems, etc.
Customer Markets
Automotion
Domestic
Industrial
Main products
Steel shafts
Stainless steel shafts
Martensitic steel shafts, etc.
Subcontracting Activities/ Product offer
Electrical motor shafts
Wiper shafts: hollow and solid
Powertrain shafts (distribution boxes)
Gas recirculation system
Valve and customize shafts
CERTIFICATIONS
Quality Management ISO 9001
Automotive Quality Management ISO TS 16949
Enviromental Managament ISO 14001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME PASCUAL CHURRUCA, S.A.
OFFICES
Address Rekalde, 21 E – 20590 Soraluze (Guipúzcoa)
GENERAL INFORMATON
Tel. +34 943 750 006 Fax +34 943 752 461 E-mail direccion@pascualchurruca.com Web www.pascualchurruca.com
Total surface (m2) 2.000
Covered surface (m2) 2.000
Founded in 1931
Turn over 3.5 million € Employees 35
Export rate 32% DUNS number
CONTACT
Contact person Enrique Churruca, Export Manager
Languages Spanish, English, French
E-mail Tel.
Enrique@pascualchurruca.com +34 943 750 006
ACTIVITIES
Company Description
Pascual Churruca, S.A. is dedicated to the manufacturing of special crews and bolts. With the flexibility of our production means, we are particularly competitive in manufacturing small and medium series of special pieces, with low tooling costs and agile delivery. We also work with special raw materials like Duplex, Suyperduplex, Titaniun, etc.
Subcontracting Activities/Product offer
Heat Traetments, coverings and other mechanical operations
Customer Markets
Elevators/lifts, Nautical equipments, Hand tools, Agromachinery, Railways, cable trays, supermarkets trolleys, automotion, water large deposits, large wood packagings, etc.
CERTIFICATIONS
ISO 9001/2000
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME PRECIMECAN, S.L.
OFFICES
Address Calle Alonso Barba, 12 E- 28806 Alcalá de Henares (Madrid)
GENERAL INFORMATON
Tel. +34 918 796 957 Fax +34 918 820 093 E-mail precimecan@precimecan.com Web www.precimecan.com
Total surface (m2) 7.500
Covered surface (m2) 4.500
Founded in 1992
Turn over 3.6 million € Employees 36
Export rate 85% DUNS number 476713953
CONTACT
Contact person Luis Camarasa (Sales Manager)
Languages Spanish, English, French
E-mail Tel.
luiscamarasa@precimecan.com +34 918 796 957
ACTIVITIES
Company Description
Manufacture of machined parts and components in accordance to clients' specifications and drawings, in small and medium sized batches. As client's demand, including raw materials, treatments, etc. Production and assembly of mechanical sub-systems or complete machines in accordance to clients' specifications and drawings, including purchase of subcomponents and materials, manufacture, inspection and testing.
Subcontracting Activities/Product offer
CNC lathes, CNC horizontal machining centers, CNC vertical machining center, 5 axes machining centers.
Customer Markets
Industrial equipment, Railways, Industrial engines, Defense, Telecommunications, Nuclear industry.
CERTIFICATIONS
ISO 9001:2008 (TÜV Rheinland)
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME RCB, S.L.
OFFICES
Address Calle 32, parc 119 P. O Box 76 E - 46470 Catarroja (Valencia)
GENERAL INFORMATON
Tel. +34 961 170 450 Fax +34 961 267 211 E-mail export@rcbboiler.com Web www.rcbboiler.com
Total surface (m2)
Covered surface (m2)
Founded in 1972
Turn over Employees
Export rate DUNS number
CONTACT
Contact person Rafael Cubells (Export Dpt.)
Languages Spanish, English
E-mail Tel.
export@rcbboiler.com +34 96 127 04 50
ACTIVITIES
Company Description
RCB. is a dynamic company that develops new products and boilers, allowing us to offer a competitive, high quality product and excellent service. We cover the complete range of steam production and pressure currently in demand by the industry and we work with any kind of solid, liquid or gaseous combustible.
Customer Markets
Siderurgy
Petrochemical
Energy
General industry
Environment
Subcontracting Activities/ Product offer
Boilers working with any kind of solid, liquid or gaseous combustible for the complete range of steam production and pressure in demand by the industry.
Main products
Firetube boilers from 100 to 30.000 kg/h
Cogeneration boilers 60 Tons of steam
Equipment items for the combustion process.
Biomass steam boilers
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME SEGURA HERMANOS, S.A.
OFFICES
Address C/ Ramón y Cajal, 19 E – 28914 Leganés (Madrid)
GENERAL INFORMATON
Tel. +34 916 876 444 Fax +34 916 882 975 E-Mail jlsegurap@seher.es Web www.seher.es
Total surface (m2) 2.500
Covered surface (m2) 2.800
Founded in 1970
Turn over Employees 49
Export rate DUNS number a-28254498
CONTACT
Contactperson José Luis Segura Pico (General Manager)
Languages Spanish, English, French, Italian
E-mail Tel.
jlsegurap@seher.es +34 916 876 444
ACTIVITIES
Company Description
It´s a family company with more than 50 years of experience in turned parts. In our machinery park you can found all the solutions for your products. Turning centers, multisspindle machines, automatic lathes, transfer machines, etc. can give to our customers the best solution for each type of pieces. We work for all type of industrial sectors (Medicine, electronic, energy, armament, tools, automotive, defense, aeronautic, railway, etc. Turned of all type of materials (Brass, aluminium, inox steels, plastic, Teflon, etc.).Low and high batches it depending of the industrial sectors. We export to all Europe (Germany, Switzerland, France, Sweden, Belgium, Norway, Finland, Holland, etc.) 80% of exportation till more than 20 years ago. Quick deliveries. Always working according with our customers (Order by order or with forecast for all year).
Subcontracting Activities/ Product offer
Precision turned Parts, Decoletaje
Customer Markets
Tools, armament, optical, aeronautic, defense, electronic, medical, lighting, automotive, pyrotechnics, railway, energies, elevators.
CERTIFICATIONS
ISO 9001/2008 (ENAC,UKAS)
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME STERN HIDRAULICA, S.A.
OFFICES
Address Bº Elbarrena S/N E - 20159 Zizurkil (Guipuzcoa)
GENERAL INFORMATON
Tel. +34 943 692 862 Fax +34 943 690 946 E-mail info@sternhidraulica.com Web www.sternhidraulica.com
Total surface (m2) 3.000
Covered surface (m2) 3.000
Founded in 1970
Turn over Employees 35
Export rate: 40% DUNS number
CONTACT
Contact person Pedro Charton (Sales Manager)
Languages Spanish, English
E-mail Tel.
pedro.charton@sternhidraulica.com +34 943 692 862
ACTIVITIES
Company Description
Stern Hidraulica is an integrated company with more than 40 years of experience in the design and manufacture of hydraulic cylinders and power units, with our own engineering department, machinery (honing, milling, turning, etc.), test benches and painting process in order to control the product quality internally in each of the processes.
Subcontracting Activities/Product offer
Capacity: up to 1000mm diameter, single strokes up to 14 meters, pressures up to 700bar in different types of materials, coating treatments and fluids. Special: Rotary, Telescopic, High pressure, stainless steel, Pneumatic, Compact, Electrohydraulic, etc. Standard: ISO 6020/1, ISO 6020/2, ISO 6022 Installation, maintenance and assembly
Customer Markets
Steel industry, hydroelectric projects, cutting lines, hydraulic presses, mining, cement, marine, offshore, machine tools, civil engineering projects, etc.
CERTIFICATIONS
Quality Management ISO 9001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME TECNICHAPA SLU
OFFICES
Address Bº Basauntz 2 E - 48140 Igorre (Vizcaya)
GENERAL INFORMATON
Tel. +34 94 630 51 61 Fax +34 94 630 51 62 E-Mail tbcomercial@tecnichapa.com Web www.tecnichapa.com
Total surface (m2) 10.500 (Igorre) + 4.000
(Kunshan) Covered surface (m
2) 10.500 (Igorre) + 4.000
(Kunshan) Founded in 1982
Turn over > 25 million € Employees 97 Igorre + 53 Kunshan
Export rate 80% DUNS number
CONTACT
Contact person Mr. Fernando Antón (Tecnical Sales)
Languages Spanish, English
E-mail Tel.
fah@tecnichapa.com +34 94 630 5161 (+34 660 468 684)
ACTIVITIES
Company Description
TECNICHAPA designs and manufactures demanding metallic components for several markets. Our clients are leading OEM companies acting globally. For sheet metal based product, we manufacture, integrate, test and homologate metallic products in medium series by using flexible manufacturing means (laser cut, punching, press breaks, automatic paneling, welding and painting) On top, we offer the integration of complementary technologies (stamping parts, machining, plastic elements, electronic elements, etc.) in order to deliver a semi-finished or turn-key product if necessary.
Subcontracting Activities/ Product offer
Manufacturing of sheet metal based products for different markets
Customer Markets
Different markets: Electrical, urban equipment, defense, printing sector, medical, railway, etc.
CERTIFICATIONS
ISO 9001:2008 and Environmental EKOSCAN
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Ugarteburu, S.A.
OFFICES
Adress Poligono Industrial de Goitondo S/N E - 48269 Mallabia (Vizcaya)
GENERAL INFORMATON
Tel. +34 943171057 Fax +34 943171192 E-mail mikeluribe@ugarteburu.com Web www.ugarteburu.com
Total surface (m2) 20.000
Covered surface (m2) 15.000
Founded in 1969
Turn over 27 million € Employees 100
Export rate 75 % DUNS number
CONTACT
Contact person Mikel Uribe (Sales Manager)
Languages Spanish, English
E-mail Tel. +34 943171057
mikeluribe@ugarteburu.com +34 672274617
ACTIVITIES
Company Description
Turned parts company with more than 50 multispindle machines (Schutte, Index MS,Tornos, Gidemeister), Single spindle lathes (Deco 20), Roller Machines (Esco, Hydromat).Working with Brass, Steel (F-212,F-211), Stainless Steel (303,430 F) and aluminum (2011,6026,6262).Range of diameters 2 mm- 50mm.
Customer Markets
Automotive Industry.
House Hold Appliances.
Hydraulics.
Locking industry.
Combustion.
Subcontracting Activities/ Product offer
A
Hardening
Plating
Main products
Screw Turned Parts
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Uniex Berri S.L. (Auxin Group)
OFFICES
Address Barroeta Aldamar, 4 (Dpt. 21) E - 48001 Bilbao (Vizcaya)
GENERAL INFORMATON
Tel. +34 94 424 3021 Fax +34 94 424 2986 E-mail info@auxin.com Web www.auxin.com
Total surface (m2) 12 plants in Spain and
Rumania Covered surface (m
2)
Founded in 1963
Turn over 70 million € Employees 456
Export rate 55% DUNS number
CONTACT
Contact person Mr. Tony Goffard (Export Manager)
Languages Spanish, English, French,
E-mail Tel.
tgoffard@auxin.com +34 944 243 021
ACTIVITIES
Company Description 12 factories (in Spain and Romania) approved ISO/TS 16949:2002 producing:
Tube shaping & hydroforming. Sub-assemblies in sheetmetal & tube in automated cells (Saljoar, S.A.)
Aluminium pressure die casting and machining (Gabi, S.A.)
Special cold formed parts and fasteners (Industrias GOL S.A.U.)
Precision turned parts and sub-assemblies (Microdeco, S.A.).
Subcontracting Activities/Product offer
In the 4 different technologies of our group we are more competitive if the requirements are high as leak tests, unit controls, special raw materials, high tolerances or sub-assemblies. We are Bosch preferred supplier. We supply among other companies to: Mercedes, Delphi, Continental, Faurecia, Kayaba, Sumitomo, Johnson Controls, etc.
Customer Markets
Mainly automotive, but other industrial sectors also, if medium and large volumes are required.
CERTIFICATIONS
ISO/TS 16949:2009; ISO 9001 and ISO 14001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME UTIL VIGO, S.L.
OFFICES
Parque Tecnológico y Logístico (PTL) Vigo Calle C nº6 E - 36314 Vigo (Pontevedra)
GENERAL INFORMATON
Tel. +34 986 211 961 Fax +34 986 202 001 E-mail utilvigo@utilvigo.es Web www.utilvigo.es
Total surface(m2) 3.500
Covered surface(m2) 1.800
Founded in 1993
Turn over 2.5 million € Employees 25
Export rate 70% DUNS number B36756591
CONTACT
Contact person Blai Viladrich
Languages Spanish, English, French, Portuguese
E-mail Tel.
otecnica@utilvigo.es +34 639 75 41 18
ACTIVITIES
Company Description
UTILVIGO is specialized in offering high precision machining solutions such as jigs&fixtures, high responsibility parts and special tooling. The company includes all the value chain from engineering to certification with divided areas for designing, production, grinding, assembly and CMM measuring. The company uses special materials such as CuAl10Ni5Fe4, CuNi30Mn1Fe4, forged and special steel or technical plastics.
Subcontracting Activities/ Product offer
milling, turning, grinding, assembly, cmm metrology, special treatments, special testing
Customer Markets
Automotive, Defence, Energy, Aerospace
CERTIFICATIONS
ISO 9001
Maschinenbau / Metallbearbeitung
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Aries Industrias del Plástico, S.A.
OFFICES
Address Montecarlo, 22 E - 28942 Fuenlabrada (Madrid)
GENERAL INFORMATON
Tel. +34 916 491 040 Fax +34 916 070 035 E-Mail luislagarde@aries-ipsa.com Web www.aries-ipsa.com
Total surface (m2) 13.000
Covered surface (m2)
8.000
Founded in 1957
Turn over 6 million € Employees 50
Export rate 21% DUNS number
CONTACT
Contact person Luis de Lagarde (Business Manager)
Languages Spanish, English
E-mail Tel.
luislagarde@aries-ipsa.com +34 916 491 040
ACTIVITIES
Company Description
Manufacturing and design of plastic mould components. Aries-IPSA offers a global solution to its clients: from the conception and development of the parts, to serial manufacture. 20 horizontal or vertical injection machines between 30 and 1.000 TM for all types of thermoplastic materials. Assembly area to use other techniques as pad-printing, skill-screen printing and painting.
Subcontracting Activities/ Product offer
Assembling of sub-assemblies and mechanical sets with plastic parts, in automatic and manual lines. Assembly tools design and construction. IML technology. Clean Room. Engineering and quality control: mould flow, 3D and other professional software.
Customer Markets
Automotive, pharmaceutical, railways, air conditioning and other different industry parts.
CERTIFICATIONS
ISO 9001-2008, Homologated by the Ministry of Health, Government of Spain, for medical devices.
Kunststoff, Chemie, Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME CREACIONES Y DISEÑOS PLÁSTICOS, S.L.
OFFICES
Address C/Cuenca, 19 Polig. Ind. L´Alfaç II E - 03440 Ibi (Alicante)
GENERAL INFORMATON
Tel. +34 966 552 086 / +34 966 552 708 Fax +34 966 550 019 E-mail crediplast@crediplast.com Web www.crediplast.com
Total surface (m2) 1.800
Covered surface (m2)
Founded in 1995
Turn over 2.6 million € Employees 28
Export rate 5% DUNS number
CONTACT
Contact person José Antonio García Peñalver
Languages Spanish, English, French
E-mail Tel.
crediplast@crediplast.com +34 966 552 086
ACTIVITIES
Company Description
Crediplast is a company that is devoted to engineering, the development of a product and the manufacture of moulds for the injection of thermoplastics. The company relies on its specialized staff who supervise and administer the correct development of a product, from the initial idea to its final production, whilst offering its clients a specialized, dynamic and personalized treatment, achieving maximum quality products, with client satisfaction being the main aim of the company. Crediplast has over 1800m
2 of qualified technological
installations, that allows for any project to be taken on, with the fluidity, guarantee and speed that the present day market demands. Nowadays, we have a work capacity of up to 90,000h per year.
Customer Markets
Car Industry
Furniture
Pharmaceutical & Cosmetics
White Goods
Main products
Moulds
3D design
Subcontracting Activities/ Product offer
A MANUFACTURE
Moulds
Machining
B ENGINEERING
Engineering
3D designs
Reverse engineering
CERTIFICATIONS
UNE EN ISO 9001:2008
Kunststoff, Chemie, Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME ESBELT, S.A.
OFFICES
Address Calle Provenza 385 E - 08025 Barcelona (Cataluña)
GENERAL INFORMATON
Tel. +34 932 973 311 Fax +34 934 593 308 E-mail acejalbo@esbelt.com Web www.esbelt.com
Total surface (m2) 8.128
Covered surface (m2) 7.639
Founded in 1970
Turn over 16.335.918 € (Consolidated 23.594.085) Employees 103
Export rate 72,6% DUNS number 86-296-9458
CONTACT
Contact person Aurora Cejalbo – Customer Service
Languages Spanish, German, English
E-mail Tel.
acejalbo@esbelt.com +34 932 080 786 +34 666 549 228
ACTIVITIES
Company Description
Manufacture and sale of 1 to 6 plies thermoplastic conveyor belts (PVC, Plyurethane, Polyolefine, Silicone and Polyester covers), profiles, round, trapezoidal and pentagonal extruded thermowealdable belts, elastomer and leather transmission belts, and belt handling machinery. Fully owned Esbelt Gmbh is based in Neüss, next to Düsseldorf. It acts as an Esbelt distributor, stocking rolls and providing belt fabrication (transformation to customers’ needs) and in site mounting services. Contact person: Ralf Schmidt, General Manager, mobile 1722188795, email rschmidt@esbelt.de.
Subcontracting Activities/Product offer
Belt fabrication (transformation to customers’ needs) and in site mounting services.
Customer Markets
Industry, Agroindustry, Food, Logistics
CERTIFICATIONS
ISO 9001:2008 by DNV
Kunststoff / Chemie / Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME MOLDEADOS TECNICOS PLASTICOS, S.A. (MOLTEPLAS)
OFFICES
Address Pol. Ind. Villalonquejar C/ Merindad De Montija S/Nº E - 09001 Burgos (Burgos)
GENERAL INFORMATON
Tel. +34 947 298 239 Fax +34 947 298 506 E-mail molteplas@molteplas.es Web www.molteplas.es
Total surface (m2) 27.000
Covered surface (m2) 7.300
Founded in 1977
Turn over 6.298.420 € Employees 70
Export rate 36% DUNS number 461093049
CONTACT
Contact person Ignacio Alvarez Santidrian (Plant Manager)
Languages Spanish, English, French
E-mail Tel.
ialvarez@molteplas.es +34 679 468 048
ACTIVITIES
Company Description
Plastic injection, Overmoulding of inserts, gas injection, sequential injection, bi-material, Semi manual Assemblies, automatic assembling cells. Blow molding, Vertical injection, Plastic Extrusion. Mold production. High pressure aluminum injection. We can cooperate as co-designers in the project with our customer, be subcontracted for making the injection process, for developing the tools. Molteplas is one of the production plants of the Mecacontrol group has in Spain. The group has 5 plants in Spain and 1 plant in Poland. Spain: 2 Plants in Cascante (Navarra), 2 Plants in Burgos (Castilla-Leon) and 1 plant in Linares (Andalucía).Poland:1 Plant in Dąbrowa Górnicza (Poland).
Subcontracting Activities/Product offer
Painting, Chrome, Screen printed, security stocks in external storages, quality control gauges, assembly cells, molds, external laboratory tests.
Customer Markets
Automotive (80%), electronics (5%), household appliances (5%), furniture(5%), lighting(3%), civil works(1%), pipes(1%).
CERTIFICATIONS
TS 16949 – ISO 9001 – ISO 14001
Kunststoff / Chemie / Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME PEREZ LINARES S.L.
OFFICES
Address C/ Tte. Gral. Vicente Ripoll Valls 48 E - 03420 Castalla (Alicante)
GENERAL INFORMATON
Tel. +34 96 556 10 13 Fax +34 96 556 08 81 E-mail info@perezlinares.com Web www.perezlinares.com
Total surface (m2) 7.000
Covered surface (m2) 3.000
Founded in 1983
Turn over 2 M€ Employees 15
Export rate 5% DUNS number
CONTACT
Contact person Samuel Pérez Languages Spanish, English
E-mail Tel.
sperez@perezlinares.com +34 96 556 10 13
ACTIVITIES
Company Description
The company is a manufacturer of plastic parts mainly by injection. The main feature in our offer is the exclusivity; we make custom parts and packaging, in sole right and with confidentiality. We offer a global service, adapted to the needs of our customers, including assembly of pieces, decoration, etc. Total adaptability in the different phases of the process to needs of every project especially in quantities, delivery times, customized colors, etc. Our last technology machinery guarantees results of high quality. Adjusted invests in molds, experience in biodegradable materials, food regulations, etc. The company has a second section focused to plastic containers and blow molding products.
Subcontracting Activities/ Product offer
Technical plastic parts, packaging and components for different industries by injection molding. Quality, confidentiality and exclusivity. Optimal relation quality/price.
Customer Markets
Packaging, furniture, electronics, shoe, gift and decoration, agriculture, textile, chemistry
CERTIFICATIONS
Quality Management ISO 9001
Kunststoff / Chemie / Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME PINTURAS MACY, S.A.
OFFICES
Address Crta. Nac. 301 Km 212.800 PO BOX 41 E - 02630 La Roda (Albacete)
GENERAL INFORMATON
Tel. +34 967 44 07 12 Fax +34 967 44 28 19 E-mail dptoexterior@pinturas-macy.com Web www.pinturas-macy.com
Total surface (m2) 120.000
Covered surface (m2) 30.000
Founded in 1978
Turn over 10.641.364 € Employees 100
Export rate 35% DUNS number A-02033355
CONTACT
Contact person Héctor Agudo (Area Sales Manager)
Languages Spanish, English, Italian, German
E-mail Tel.
macyeurope@pinturas-macy.com +34 666 43 84 73
ACTIVITIES
Company Description A familiar company built up thanks to the determination and effort of his founder. Nowadays the latest techniques for the manufacturing of paints, the own investigation and development of new products and the constant renovation, lead Pinturas Macy SA to be an exemplary company in the whole world. This technology provides us with a sophisticated tintometric system able to make more than 10.000 colours instantaneously and exact repetition of the colour guaranteed. Finally a production capability of more than 500 tons of paint per day assure our orders to be always on time.
Subcontracting Activities/ Product offer Plastic paints, house-paints, high decoration, waterproof-paints, enamels, varnishes, glazes, sealers, paste fillers, dyestuffs, ecological paints, etc.
Customer Markets European Union, South America, Africa and Middle East.
CERTIFICATIONS
ISO 9001 & 14001, AENOR, IQ-NET
Kunststoff / Chemie / Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Poliuretanos Rivas, S.A.
OFFICES
Address C/ Joaquin Costa, 20 E - 50298 Pinseque (Zaragoza)
GENERAL INFORMATON
Tel. +34 976 617 131 Fax +34 976 656 897 E-mail info@poliuretanosrivas.com Web www.poliuretanosrivas.com
Total surface (m2) 15.000
Covered surface (m2) 6.500
Founded in 1978
Turn over 2.5 million € Employees 28
Export rate 30% DUNS number
CONTACT
Contact person Fernando Rivas (Technical Director)
Languages Spanish, English
E-mail Tel.
info@poliuretanosrivas.com +34 976 617 131
ACTIVITIES
Company Description
Poliuretanos Rivas started in 1978 and its main activity is producing polyurethane molded items. We work with different types of polyurethane, from flexible fire-retardant foams to rigid materials, semirigid (integral skin) ones or viscoelastic foams. 15 High pressure machines (Krauss Maffei). We also have a line of coated foam.
Customer Markets
Railway cushions
Office/Home furniture
Bedding
Collectivities
Bus interiors
Bath room
Subcontracting Activities/ Product offer
Flexible molded polyurethane
Integral skin molded polyurethane
Rigid molded polyurethane
Viscoelastic molded polyurethane
Coated foams
Main products
Memory Foam pillows
Flexible shower trays and basins
Flexible cushions, armchairs, seats and backrests
Coated furniture
CERTIFICATIONS
ISO 9001
ISO 14001
Kunststoff / Chemie / Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME PROINDIVER, S.L.
OFFICES
Address Ronda Narcís Monturiol 35-37 E - 08349 Cabrera de Mar (Barcelona)
GENERAL INFORMATON
Tel. +34 937 596 166 Fax +34 937 594 100 E-mail proindiver@proindiver.com Web www.proindiver.net
Total surface (m2) 5.000
Covered surface (m2) 2.100
Founded in 1980
Turn over 1.9 million € Employees 15
Export rate 22% DUNS number 460096977
CONTACT
Contact person Jordi Aguilera (Business Development Manager)
Languages Spanish, English, Catalan
E-mail Tel.
comercial@proindiver.com +34 937 596 166
ACTIVITIES
Company Description
PROINDIVER is a chemical company founded in 1980 and located near Barcelona that is devoted to the research and development, manufacturing and commercialization of chemical auxiliary products in the field of Fine Chemicals areas like textile, leather, paper, polymers and resins. We are present in many countries all around the world, and we can operate also working as a CRO or CMO company.
Subcontracting Activities/ Product offer
Chemical specialties, auxiliary products, CMO,CRO, active principles
Customer Markets
Textile, leather, polymers, resins, paintings, paper, detergency, pharma, cosmetics.
Kunststoff / Chemie / Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME ZATEC, S.A.
OFFICES
Polígono Industrial Las Norias Avenida Valencia nº20 E - 50450 Muel (Zaragoza)
GENERAL INFORMATON
Tel. +34 976 145 250 Fax +34 976 141 151 E-mail plastics@zatecsa.com Web www.zatecsa.com
Total surface (m2) 4.200
Covered surface (m2) 3.400
Founded in 1991
Turn over 3 million € Employees 23
Export rate 20% DUNS number 469600712
CONTACT
Contact person José Ramón Benedí (Sales)
Languages Spanish, English
E-mail Tel.
jrbenedi@zatecsa.com +34 976 145 250 ext.2002
ACTIVITIES
Company Description
Since Its inception, Zatec has been a company dedicated to injection of small and technical parts in engineering plastics. Zatec offers a comprehensive service of product, from design through prototype and mold until serial production. Besides the other complementary activities. We are a flexible company and as such we can supply small and large series.
Customer Markets
Automotive
Electrical
Electronic
Telecommunications
Lighting
Ovens
Welding
Activities/ Product offer
Injection of technical parts in engineering plastics from 0.1 gr. to about 325 gr.
Pad printing
Welding of plastic parts (Ultrasonic and Rotation)
Humidity Conditioning for hygroscopic parts
Assembly
Main products
Our main market is automotive, therefore our plastic parts are used in different areas:
Under the hood
Antivibration systems
Powertrain – Drivetrain
System Transfer fluids
Seats
CERTIFICATIONS
ISO/TS 16949: 2009 ISO 9001:2008
Kunststoff / Chemie / Pharma
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME CAF POWER & AUTOMATION, S.L.U. OFFICES
Address Parque Tecnológico de San Sebastián Pso. Mikeletegi, 58 – 2º E – 20009 San Sebastián (Gipuzkoa)
GENERAL INFORMATON
Tel. +34 943 309 251 Fax +34 943 309 252 E-mail info@cafpower.com Web www.cafpower.com/embedded
Total surface (m2) 8.000
Covered surface (m2) 8.000
Founded in 2012 (Merger of 3 CAF Group subsidiaries).
Turn over 70 million € Employees 240
Export rate 85% (CAF Group) DUNS number
CONTACT
Contact person Juan Miguel Pérez (Sales Manager)
Languages Spanish, Basque, English, German, French
E-mail Tel.
jmperez@cafpower.com +34 943 309 251
ACTIVITIES
Company Description Electronic industrial solutions. Experts in real time, rugged and/or functional safety critical systems. Years of research and considerable investment have enabled us to gain valuable experience, skills and products that we can use to help our clients to ensure a reduction in marketing times and non-recurring costs in the launch of new products. Our electronic platforms act as base for the development of control applications with or without functional safety requirements. We also offer Electrical Traction, Information-, Communication- and Energy Systems through our railway business unit.
Customer Markets
Railways
Buses
Heavy Cranes
Heavy Machinery
Energy
Medical Devices
Subcontracting Activities/Product offer Electronic platforms (HW+BSP+FW) +associated engineering services:
Embedded Soft- and Hardware
Functional Safety
Testing and Simulation Systems
Electronic System Engineering
Electrical Traction and Energy Systems
Information and Communication Systems
Main products
BITART Electronics: General electronic platform for applications with functional safety requirements.
BITART Testing Tool: Software for automated testing and validation of any kind of system.
Different Rugged Electronic Systems
CERTIFICATIONS
ISO 9001
EN 15085
CMMI Level 2
ISO/IEC 15504 (SPICE)
IRIS
Functional Safety Standards
Life Cycle Management Process certified by TÜV Rheinland for developments up to SIL 4
Elektronik / IT / IKT / Elektrotechnik
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME Casado Martinez, S.L.
OFFICES
Address Crta. Gallur-Sangüesa km 4.3 E – 50650 Gallur (Zaragoza)
GENERAL INFORMATON
Tel. +34 976 865 039 Fax +34 976 866 280 E-mail casmar@casadomartinez.com Web www.casadomartinez.com
Total surface (m2) 15.000
Covered surface (m2) 8.000
Founded in 1981
Turn over Employees
Export rate DUNS number
CONTACT
Contact person Miguel Calavia Lago
Languages Spanish, English
E-mail Tel.
casmar@casadomartinez.com +34 630 173 734
ACTIVITIES
Company Description
Study, construction and installation of electrical mountings cabinets for small and large projects. The sectors where Casado Martinez operates are: renewable energy, industrial and public projects, machine tools and construction, installers and electricity distribution companies
Subcontracting Activities/ Product offer
Electrical cabinets manufactured in various sizes and finishes. Design of the electrical panel and cabinet adapted: all sizes, different distributions and maneuvers (formats), different materials, individual design, etc. Machining center to manufacture cabinets
Customer Markets Metallurgy, agrifood, manufacturer, renewable energy, rail
CERTIFICATIONS
ISO 9001 IN STEP
Elektronik / IT / IKT / Elektrotechnik
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME LKS INGENIERIA S.COOP, DIARADESIGN
OFFICES
Address GARAIA Innovation Centre, Goiru kalea 7 E - 20500 Arrasate-Mondragón (Gipuzkoa) Other offices: China, India, Colombia, Chile, Peru
GENERAL INFORMATON
Tel. +34 902 03 04 88 Fax +34 943 79 38 78 E-mail info@diaradesign.com Web www.diaradesign.com, www.lksgroup.com, www.mondragonconrporation.com
Founded in 1986
Turn over 27 million € (2012) Employees 178
Export rate 6% DUNS number
CONTACT
Contact person Olaia Irulegi (Managing Director)
Languages Basque, Spanish, German, English
E-mail oirulegi@diaradesign.com Tel. +34 608 349 020
ACTIVITIES
Company Description
DIARADESIGN is an international and reputed Design Consultancy consisted of a creative and innovative team with a more than 25 years of experience in Product, Transport, Brand and Interior Design. 90% of the projects have been successfully launched into the market, what endorses our strategic vision and market knowledge.
Customer Markets
Transport
Consumer
Professional
Healthcare
Public
Retail
Subcontracting Activities/Product offer
CONSULTANCY User and market centered research, brand and design strategy.
DESIGN Concept design and creativity.
ENGINEERING Detailed development until prototype and industrialization assistance
Main references
CAF, Irizar, Talgo, Iveco, ISRI, CRC, CSR, B/S/H, Fagor, Haier, Philips, Danobat, Orona, Ormazabal, Telefonica
CERTIFICATIONS
UNE-EN-ISO 9001 Quality Management
UNE-EN-ISO 14001 Environmental Management
UNE 150:301 Whole Life Cycle Product Assessment and Management Method
UNE 150301:2004 EcoDesign.
Dienstleistungen / Engineering / Logistik
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME DISFASA, S.A.
OFFICES
Address Avenida Cuba, 50 E - 34004 Palencia (Palencia)
GENERAL INFORMATON
Tel. +34 917153257 Fax +34 979713016 E-mail export@facundo.es Web www.facundo.es
Total surface (m2)
Covered surface (m2) 12.000
Founded in 1944
Turn over 25 million € Employees 150
Export rate 0,3% DUNS number
CONTACT
Contact person Silvia González Pastrana (Export Manager)
Languages Spanish, English, French
E-mail Tel.
sgonzalez@facundo.es +34 600 590 020
ACTIVITIES
Company Description
Facundo offers the market a wide range of gluten free nuts and snacks that are especially recommended to satisfy the most demanding consumers. Facundo continuously aims for quality and excellence, designing new products with high added value and always improving the production processes of its two factories.
Subcontracting Activities/Product offer
Sunflower seeds, fried corn, cocktails of nuts and snacks, corn rings (Chaskis), corn chips (Fritos) and olive oil or flavored hand cooked potato chips.
Customer Markets
Retail, Cash & Carry, foodservice and convenience stores.
CERTIFICATIONS
Quality Management ISO 9001
Lebensmittel / Getränke
AHK / BME Beschaffungsleitfaden Spanien 2014 © AHK Spanien - BME e.V.
COMPANY NAME GRUPO ALBERT 2000, S.L.
OFFICES
Address Avda. Biar S/N E - 03469 Campo De Mirra (Alicante)
GENERAL INFORMATON
Tel. +34 962 911 215 Fax +34 962 910 275 E-mail salva@grupoalbert.com Web www.grupoalbert.com
Total surface (m2) 3.000
Covered surface (m2) 3.000
Founded in 1989
Turn over 1.834.822 € Employees 20
Export rate 670.445 € DUNS number
CONTACT
Contact person Salvador Albert Bolinches (Export Manager)
Languages Spanish, English
E-mail Tel.
salva@grupoalbert.com + 34 962 911 215
ACTIVITIES
Company Description
Grupo Albert is a Spanish company that provides packaging solutions, during more than 30 years. This experience is making us a serious, formal, expert and recognized company. Our mission is providing medium / high level packages for companies who are looking for a new add-value to them items through the packaging.
We produce bags in different materials, starting from PE, PEVA, PP, PVC, PP-NW, cotton fabric, and even now developing new eco materials and always under standard UE rules. We also produce rigid boxes made in PP, PVC, cardboard. We even can develop for you new projects, including designs, printing, making prototypes and adapting the packaging to your needs, sizes, budget or requirements.
Shopping bags (Foldable bags, Re-usable bags, Standard bags)
Tailor made zipper bags (Bags adapted to your dimensions, colors, shapes, etc.)
Boxes (Rectangular, Tubes, Balls)
Mattress cover (PVC and PP NW with printing and elastic rubber)
Flat bags with heat welding (with adhesive tape, with hanger hook, with press zipper)
Flat bags with ultrasonic welding (with adhesive tape, hanger hook or press zipper)
Customer Markets
Home Textil Manufacturers
Marketing companies
Bed Linen Manufacturers
Cosmetics Manufacturers
Textil Manufacturers
in most of European countries, north of Africa, Latin America and Russia.
Main products
As we are manufacturers we can design and produce any packaging that will suit to customer product.
Subcontracting Activities/Product offer
HOME TEXTIL MANUFACTURERS
Table cloth
Towels
BED LINEN MANUFACTURERS
Pillows, Duvets, Comforters
Mattress, Blankets, Bedsheets
Bed linen for children
We have Spanish design, quality and quick service, combining with our stock; we are able to deliver in 48 hours some of our references. We have also production in far-east, with more than 15 years of partnered and under our own quality and production control.
Sonstige / Verpackung
Recommended