CIVIL ENGINEERING New Release - laxmipublications.comlaxmipublications.com/catalogue/1435658236Civil...

ISBN: 978-93-80856-67-4

EDITION: Third, 2011

SIZE: 71

49

1

2

′′ × ′′

PAGES: 309

PRICE: ` 395.00

IMPRINT: USP

ISBN: 978-93-80856-04-9

EDITION: Third, 2011

SIZE: 51

28

1

2

′′×

′′

PAGES: 523

PRICE: ` 375.00

IMPRINT: USP

2. A Textbook of Strength of Materials Dr. R.K. Bansal

ISBN: 978-81-318-0078-2

EDITION: Third, 2013

SIZE: 71

49

1

2

′′ × ′′

PAGES: 573

PRICE: ` 380.00

IMPRINT: LP

1. Basics of Statics of Particles; 2. Equilibrium of Rigid Bodies; 3. Properties of Surfaces andSolids; 4. Dynamics of Particles; 5. Friction and Elements of Rigid Body Dynamics.

1. Engineering Mechanics Dr. R.K. Bansal

ISBN: 978-81-318-0814-6

EDITION: Fifth, 2012

SIZE: 71

49

1

2

′′×

′′

PAGES: 1160

PRICE: ` 625.00

IMPRINT: LP

1. Simple Stresses and Strains; 2. Elastic Constants;3. Principal Stresses and Strains; 4. Strain Energy and ImpactLoading; 5. Centre of Gravity and Moment of Inertia; 6. ShearForce and Bending Moment; 7. Bending Stresses in Beams;8. Shear Stresses in Beams; 9. Direct and Bending Stresses;10. Dams and Retaining Walls; 11. Analysis of Perfect Frames;12. Deflection of Beams; 13. Deflection of Cantilevers;14. Conjugate Beam Method, Propped Cantilevers and Beams;15. Fixed and Continuous Beams; 16. Torsion of Shafts and Springs;17. Thin Cylinders and Spheres; 18. Thick Cylinders and Spheres;19. Columns and Struts; 20. Riveted Joints; 21. Welded Joints;22. Rotating Discs and Cylinders; 23. Bending of Curved Bars;24. Theories of Failure; 25. Unsymmetrical Bending and ShearCentre; 26. Objective Type Questions.

1. Introduction; 2. Hydrometeorology; 3. Probability and Statistics; 4. The Catchment;5. Precipitation; 6. Streamflow Measurement; 7. Evaporation and Evapo transpiration;8. Infiltration; 9. Groundwater; 10. Runoff; 11. Hydrograph Analysis; 12. Instantaneous UnitHydrograph; 13. Flood Routing; 14. Design Flood; 15. Sedimentation.

3. A Textbook of Hydrology Dr. P. Jaya Rami Reddy

(For Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal )

Part-A: Basic Civil Engineering

Unit I, Unit II, Unit IIIPart-B: Engineering Mechanics

Unit IV, Unit V

4. Basic Civil Engineering and Engineering Mechanics Dr. R. K. Bansal,Rakesh Ranjan Beohar, Ahmed Ali Khan

1

New ReleaseCIVIL ENGINEERING

Bestseller

2,25,000COPIES SOLD

2-Colour

Edition

with CD

2

More TitlesCIVIL ENGINEERING

ISBN: 978-93-80386-57-7

EDITION: First, 2010

SIZE: 71

49

1

2

′′ × ′′

PAGES: 298

PRICE: ` 195.00

IMPRINT: USP

ISBN: 978-93-80386-70-6

EDITION: First, 2010

SIZE: 71

49

1

2

′′×

′′

PAGES: 112

PRICE: ` 100.00

IMPRINT: USP

1. Design Principles of RCC Structures; 2. Loads on Structure; 3. Material Used in RCStructures; 4. Characteristic Strength and Load; 5. Classification of Beams; 6. Bending Momentand Shear Force; 7. Sign Conventions; 8. Relation between Shear Force and Bending Moment;9. Shear Force and Bending Moment Diagrams for Statically Determinante Structure; 10. ShearForce and Bending Moment Diagrams for Statically Indeterminate Structure; 11. Methods ofDesign; 12. Design Example (RCC Framed Structure).

6. Basic Principles of Analysis and Design of an RCC Framed Structure Prof. H.R. Surya Prakash, S. Krishna Murthy

1. Importance of Purchasing Function; 2. Store Organisation and Function; 3. StoresNomenclature and Price Lists; 4. Purchase of Stores Policy and Rules Purchases Policy;5. Contracts; 6. Scrutiny of Contract/Indents; 7. Contract Estimates; 8. Purchase Procedure:Direct Purchases by the Administration; 9. Purchase Through Directorate General of Supplyand Disposal; 10. Purchase of Sleepers; 11. Purchase of Stationary, Printing Stores andPrinting of Form; 12. Instruction to Tenderers; 13. Legal Aspects on Purchasing; 14. ImportProcedure and Clearance of Important Cargo at Kolkata Port; 15. Material Quality Improvementthrough Standardisation; 16. Computerisation of Stores Accounts and Stores Functions;17. Rolling Stock Components; 18. Work done of Purchaser in CON Constructions of N-FRailway; 19. Tender Section; 20. Local Purchase Section; 21. Establishment Section; 22. Workdone in the Controller Source of Construction Organisation; 23. Office Order; 24. SteamLocomotives Parts and Fittings; 25. Material Management EOQ Formula; 26. Stores Depots-Receipt and Custody of Stores; 27. Stores Depots-Issue of Stores; 28. Depot Ledger; 29. Issueto and Receipt from Workshop Issue to Workshop; 30. Returned Stores; 31. Empties;32. Imprest Stores (Other than Engineering Stores); 33. Engineering Plant Reserve Costudy,Receipt and Issue; 34. Carriage of Railway Materials; 35. Surplus Stocks; 36. Sale of RailwayMaterials; 37. Scrap and Auction Sales; 38. Priced Ledgers; 39. Check and Payment of StoresBills; 40. Transfer Transactions, Stores Journal and Final Accounts; 41. The Annual Statementof Stores Transactions; 42. The Store Budget; 43. Stock Verification of Stores Depots by theAccounts Department; 44. Material Management Outline.

7. Material Management Indian Railways Dr. C.L. Bansotra

Part-A: Basics

1. Introduction; 2. Basic Definitions and Simple Tests; 3. Clay Mineralogy and Soil Structure

Part-B: Index Properties and Soil Classification

4. Particle Size Analysis; 5. Plasticity Characteristics of Soils; 6. Classification of Soils

Part-C: Engineering Properties

7. Permeability of Soils, Seepage Analysis and Concept of Effective Strees; 8. Consolidationof Soils; 9. Shear Strength of Soils

ISBN: 978-93-80386-79-9

EDITION: First, 2010

SIZE: 71

49

1

2

′′ × ′′

PAGES: 213

PRICE: ` 140.00

IMPRINT: USP

5. Fundamentals of Soil Mechanics Prof. A.V. Narasimha Rao

3

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ1 20-2-13

ISBN: 978-81-318-0815-3

EDITION: Ninth, 2010

SIZE: 71

49

1

2

′′ × ′′

PAGES: 1130

PRICE: ` 550.00

IMPRINT: LP

1. Properties of Fluids; 2. Pressure and its Measurement; 3. Hydrostatic Forces on Surfaces;4. Buoyancy and Floatation; 5. Kinematics of Flow and Ideal Flow; 6. Dynamics of Fluid Flow;7. Orifices and Mouthpieces; 8. Notches and Weirs; 9. Viscous Flow; 10. Turbulent Flow;11. Flow Through Pipes; 12. Dimensional and Model Analysis; 13. Boundary Layer Flow;14. Forces on Submerged Bodies; 15. Compressible Flow; 16. Flow in Open Channels;17. Impact of Jets and Jet Propulsion; 18. Hydraulic Machines - Turbines; 19. CentrifugalPumps; 20. Reciprocating Pumps; 21. Fluid System.

8. A Textbook of Fluid Mechanics and Hydraulic Machines Dr. R.K. Bansal

ISBN: 978-81-318-0846-7

EDITION: Eighth, 2010

SIZE: 71

49

1

2

′′×

′′

PAGES: 255

PRICE: ` 160.00

IMPRINT: LP

1. Fundamental Principles; 2. Linear Measurements; 3. Chain Surveying; 4. CompassSurveying; 5. Levelling; 6. Plane Table Survey; 7. Minor Instruments; 8. Simple Curves;9. Computation of Area.

9. Surveying and Field Work (Part I) (Hindi Medium) Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 978-81-318-0861-0

EDITION: Eighth, 2010

SIZE: 71

49

1

2

′′ × ′′

PAGES: 334

PRICE: ` 195.00

IMPRINT: LP

1. Plane Table Survey; 2. The Theodolite; 3. Theodolite Traverse; 4. Trigonometrical levelling;5. Tacheometric Surveying; 6. Contour Surveying; 7. Curve Surveying; 8. Computation ofArea; 9. Computation of Volume; 10. Triangulation; 11. Photogrammetric Surveying;12. Electronic Theodolites and Tacheometers.

10. Surveying and Field Work (Part II) (Hindi Medium) Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 978-81-318-0718-7

EDITION: First, 2009

SIZE: 71

49

1

2

′′×

′′

PAGES: 232

PRICE: ` 195.00

IMPRINT: USP

1. The Pressing Issues; 2. Methodologies and Tools; 3. Institutional Requirements;4. Contributions from Panel Members and Session Chairs; 5. Summary of Final PanelDiscussion.

11. Geoinformation for Development Peter Zeil; Stefan Kienberger

4

More TitlesCIVIL ENGINEERING

ISBN: 978-81-318-0428-5

EDITION: Tenth, 2008

SIZE: 71

49

1

2

′′×

′′

PAGES: 666

PRICE: ` 425.00

IMPRINT: LP

ISBN: 978-81-318-0408-7

EDITION: Third, 2008

SIZE: 71

49

1

2

′′×

′′

PAGES: 452

PRICE: ` 850.00

IMPRINT: USP

ISBN: 978-81-318-0385-1

EDITION: Fourth, 2008

SIZE: 71

49

1

2

′′ × ′′

PAGES: 446

PRICE: ` 850.00

IMPRINT: USP

0. Introduction; 1. Deflection of Determinate Structures; 2. Slope Deflection Method; 3. MomentDistribution Method; 4. Matrix Flexibility Method; 5. Matrix Stiffness Method; 6. Model Analysis;7. Strain Energy Method; 8. Kani’s Method.

13. Structural Analysis (Vol. I) (Hard Bound) Dr. R. Vaidyanathan, Dr. P. Perumal

1. Rolling Loads; 2. Influence Lines; 3. Influence Lines for Indeterminate Structures; 4. Arches;5. Cables and Suspension Bridges; 6. Beams Curved in Plan; 7. Space Trusses; 8. PlasticAnalysis of Structures; 9. Redundant Frames; 10. Rapid and Approximate Analysis of BuildingFrames; 11. Introduction to Finite Element Method.

14. Structural Analysis (Vol. II) (Hard Bound) Dr. R. Vaidyanathan, Dr. P. Perumal

1. Introduction; 2. Foundations-1: General; 3. Foundations-2: Shallow Foundations; 4. Foundations-3: Deep Foundations;5. Masonry-1: Stone Masonry; 6. Masonry-2: Brick Masonry;7. Masonry-3: Composite Masonry; 8. Load Bearing Walls; 9. CavityWalls; 10. Partition Walls; 11. Floors-I: Ground Floors; 12. Floors-II: Upper Floors; 13. Lintels and Arches; 14. Stairs; 15. Roofs andRoof Coverings; 16. Carpentry and Joinery; 17. Doors andWindows; 18. Shoring, Underpinning and Scaffolding; 19. Plastering and Pointing; 20. Painting,Distempering and Whitewashing; 21. Damp Proofing; 22. Termite Proofing; 23. Fire Protection;24. Thermal Insulation; 25. Plain and Reinforced Cement Concrete; 26. Formwork;27. Ventilation and Air-conditioning; 28. Acoustics and Sound Insulation; 29. PERT and CPM;30. Plumbing for Building; 31. Buildings Plans; 32. Earthquake Resistant Building.

15. Building Construction Dr. B.C. Punmia, Ashok Kr. Jain, Arun Kr. Jain

ISBN: 978-81-318-0763-7

EDITION: Sixteenth, 2009

SIZE: 51

28

1

2

′′×

′′

PAGES: 980

PRICE: ` 595.00

IMPRINT: LP

Section I: Irrigation Practice1. Introduction; 2. Methods of Irrigation; 3. Water Requirements of Crops

Section II: Water Resources Engineering4. Hydrology; 5. Ground Water: Well Irrigation; 6. Reservoir Planning; 7. Dams-I: General;8. Dams-II: Gravity Dams; 9. Dams-III: Arch and Buttress Dams; 10. Dams-IV: Earthand Rockfill Dams; 11. Dams-V: Spillways; 12. Diversion Headworks

Section III: Distribution System13. Flow Irrigation; 14. Irrigation Channels: Silt Theories;15. Design Procedure for an Irrigation Channel; 16. Water Log-ging and Canal Lining; 17. Canal Outlets; 18. Canal RegulationWorks; 19. Cross Drainage Works

Section IV: Miscellaneous Topics20. River Engineering; 21. Water Power Engineering; 22. WaterResources Planning; 23. Important Dams of India.

12. Irrigation and Water Power Engineering Dr. B.C. Punmia, Dr. Pande Brij Basi Lal,Ashok Kumar Jain and Arun Kumar Jain

Bestseller

1,50,000COPIES SOLD

Bestseller

1,25,000COPIES SOLD

5

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ1 20-2-13

ISBN: 978-81-318-0558-9

EDITION: First, 2008

SIZE: 71

49

1

2

′′×

′′

PAGES: 161

PRICE: ` 110.00

IMPRINT: USP

1. Introduction; 2. Introduction to Engineering Mechanics; 3. Composition and Resolution of aForce System; 4. Centroid; 5. Lamies Theorem; 6. Determinate and Indeterminate Structures;7. Friction; 8. Moment of Inertia.

16. Elements of Civil Engineering H.C.M. Swamy

ISBN: 978-81-318-0505-3

EDITION: Second, 2008

SIZE: 71

49

1

2

′′×

′′

PAGES: 348

PRICE: ` 210.00

IMPRINT: USP

(For Rajiv Gandhi Proudyogiki Vishwavidyalaya, Bhopal )UNIT 1 : CIVIL ENGINEERING1. Stones; 2. Bricks; 3. Lime; 4. Cement; 5. Mortar; 6. Cement Concrete; 7. Aggregate;8. Timber; 9. Other Important Building MaterialsUNIT 2 : BUILDING CONSTRUCTION1. Elements of Building Construction; 2. Foundation; 3. Brick Masonry; 4. Stone Masonry;5. Dampness and its Prevention; 6. Floors; 7. Roofs; 8. Doors and Windows; 9. Arches andLintels; 10. Stairs; 11. Plastering and Pointing; 12. Formwork and Scaffolding; 13. Cost EffectiveConstruction TechniquesUNIT 3 : SURVEYING AND POSITIONING1. Introduction; 2. Chain Surveying; 3. Chain Triangulation; 4. Compass Surveying; 5. PlaneTable Surveying; 6. Levelling; 7. TheodoliteUNIT 4 : MAPPING AND SENSING1. Mapping and SensingUNIT 5 : DISASTER RESISTANCE BUILDING1. Disaster Resistant Building; 2. Disaster Management; 3. Introduction to Various I.S. Codes.

17. Basic Civil Engineering Rakesh Ranjan Beohar

1. Reinforced Concrete Materials; 2. Design Concepts: Limit State Design; 3. Limit State ofCollapse in Flexure: I Singly Reinforced Rectangular Sections; 4. Limit State of Collapse inFlexure: II Doubly Reinforced Rectangular Sections; 5. Limit State of Collapse in Flexure: IIINon-Rectangular Sections; 6. Limit State of Collapse in Flexure: IV Flanged Sections; 7. LimitState of Collapse in Shear: Design for Shear; 8. Limit State of Collapse in Bond; 9. LimitState of Collapse in Torsion; 10. Limit State of Serviceability in Deflection and Cracking;11. Design of Beams and Slabs; 12. Two Way Slabs; 13. Circular Slabs; 14. Flat Slabs;15. Design of Stair Cases; 16. Limit State of Collapse in Compression: I Axially LoadedColums; 17. Limit State of Collapse in Compression: II Columns with Axial Load and UniaxialBending; 18. Limit State of Collapse in Compression: III Columns with Axial Load and BiaxialBending; 19. Limit State of Collapse in Compression: IV Slender Columns; 20. Yield LineTheory and Design of Slabs; 21. Redistribution of Moments; 22. Design of Footings; 23. Designof Retaining Walls; 24. Building Frames; 25. Prestressed Concrete; 26. Design of MiscellaneousStructures; 27. Detailing of Earthquake Resistant R.C. Structures.

ISBN: 978-81-318-0241-0

EDITION: First, 2007

SIZE: 71

49

1

2

′′×

′′

PAGES: 936

PRICE: ` 575.00

IMPRINT: LP

18. Limit State Design of Reinforced Concrete Dr. B. C. Punmia, Ashok Kumar Jain, Arun Kumar Jain

6

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

ISBN: 978-81-318-0781-1

EDITION: Third, 2007

SIZE: 71

49

1

2

′′ × ′′

PAGES: 446

PRICE: ` 275.00

IMPRINT: LP

ISBN: 978-81-318-0566-4

EDITION: Second, 2007

SIZE: 81

211

′′× ″

PAGES: 437

PRICE: ` 395.00

IMPRINT: USP

1. Introduction; 2. Simplification of Loads; 3. Material; 4. Limit State Method of Design;5. Simplified Proposition of Reinforcement; 6. Parameters of Design; 7. Analysis; 8. Design ofSlabs; 9. Special Designs of Slabs; 10. Detailings of Reinforcement.

19. Design for RCC Slabs—A Ready Reckoner K.C. Jain

0. Introduction; 1. Deflection of Determinate Structures; 2. SlopeDeflection Method; 3. Moment Distribution Method; 4. MatrixFlexibility Method; 5. Matrix Stiffness Method; 6. Model Analysis;7. Strain Energy Method; 8. Kani’s Method.

20. Structural Analysis (Vol. I) Dr. R. Vaidyanathan & Dr. P. Perumal

ISBN: 978-93-80386-50-8

EDITION: Second, 2007

SIZE: 71

49

1

2

′′ × ′′

PAGES: 198

PRICE: ` 125.00

IMPRINT: USP

1. Classification and Behaviour of Structures; 2. Static and Kinematic Indeterminacies ofStructures; 3. General Theorems and Strain Energy Method; 4. Slope-Deflection Method;5. Moment Distribution Method and Naylor’s Method; 6. Deflection of Determinate Structures;7. Matrix Flexibility Method; 8. Matrix Stiffness Method; 9. Rolling Loads; 10. InfluenceLines for Statically—Determinate Structures–Beams and Trusses; 11. Influence Lines forIntermediate Structures; 12. Model Analysis; 13. Arches; 14. Cables and Suspension Bridges;15. Space Trusses; 16. Beams Curved in Plan; 17. Plastic Analysis of Structures;18. Redundant Frames; 19. Introduction to Theory of Elasticity; 20. Introduction to the FiniteElement Method; 21. Kani’s Method; 22. Rapid and Approximate Analysis of Building Frames.

21. Structural Analysis Through Short Questions and Answers Dr. R. Vaidyanathan & Dr. P. Perumal

ISBN: 978-81-318-0878-8

EDITION: First, 2007

SIZE: 71

49

1

2

′′ × ′′

PAGES: 777

PRICE: ` 495.00

IMPRINT: LP

(OBJECTIVE TYPES)

(With Multiple Choice Questions and Answers, Including Brief Theory)1. Fluid Mechanics and Hydraulic Machines; 2. Engineering Mechanics; 3. Strength ofMaterials; 4. Hydrology; 5. Water Resources Engineering; 6. Water Supply Engineering;7. Sanitary Engineering; 8. Soil Mechanics; 9. Highway Engineering; 10. RailwayEngineering; 11. Building Materials; 12. Building Construction; 13. Theory of Structures;14. Reinforced Cement Concrete Structures; 15. Steel Structures; 16. Surveying;17. Construction Planning, PERT, CPM; 18. Estimating and Quantity Surveying; 19. AirPollution.

22. Civil Engineering Dr. P. Jaya Rami Reddy

Bestseller

25,000COPIES SOLD

7

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

ISBN: 978-81-318-0601-2

EDITION: First, 2006

SIZE: 71

49

1

2

′′×

′′

PAGES: 168

PRICE: ` 125.00

IMPRINT: USP

1. Computer Aided Analysis and Design; 2. Computer Program for Analysis of Beams;3. Programs for Design of RCC Beams; 4. Analysis of Beams and Frames using Software;5. Use of Spread Sheet—Excel; Appendices.

24. Reference Book on Computer Aided Design Laboratory Dr. M.N. Shesha Prakash, Dr. G.S. Suresh

1. Rolling Loads; 2. Influence Lines; 3. Influence Lines for Indeterminate Structures;4. Arches; 5. Cables and Suspension Bridges; 6. Beams Curved in Plan; 7. Space Trusses;8. Plastic Analysis of Structures; 9. Redundant Frames; 10. Rapid and Approximate Analysisof Building Frames; 11. Introduction to Finite Element Method.

ISBN: 978-81-318-0782-8

EDITION: Second, 2006

SIZE: 71

49

1

2

′′×

′′

PAGES: 452

PRICE: ` 295.00

IMPRINT: LP

23. Structural Analysis (Vol. II) Dr. R. Vaidyanathan & Dr. P. Perumal

ISBN: 978-81-318-0942-6

EDITION: Tenth, 2006

SIZE: 71

49

1

2

′′×

′′

PAGES: 1246

PRICE: ` 750.00

IMPRINT: LP

Part I: Working Stress Method1. Introduction; 2. Theory of Reinforced Beams and Slabs; 3. Shear and Bond; 4. Torsion;5. Doubly Reinforced Beams; 6. T and L-Beams; 7. Design of Beams and Slabs; 8. Design ofStair Cases; 9. Reinforced Brick and Hollow Tile Roofs; 10. Two-way Slabs; 11. CircularSlabs; 12. Flat Slabs; 13. Axially Loaded Columns ; 14. Combined Direct and BendingStresses ; 15. Continuous and Isolated Footings; 16. Combined Footings; 17. Pile Foundations;18. Retaining Walls

Part II: Water Tanks19. Domes; 20. Beams Curved in Plan; 21. Water Tanks—I: Simple Cases; 22. Water Tanks—II: Circular & INTZE Tanks; 23. Water Tanks—III: Rectangular Tanks; 24. Water Tanks—IV:Underground Tanks

25. R.C.C. Designs Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

Part III: Miscellaneous Structures25. Reinforced Concrete Pipes; 26. Bunkers and Silos; 27. Chimneys; 28. Portal Frames; 29. Building Frames

Part IV: Concrete Bridges30. Aqueducts and Box Culverts; 31. Concrete Bridges

Part V: Limit State Design32. Design Concepts; 33. Singly Reinforced Sections; 34. Doubly Reinforced Sections 35. T and L-Beams; 36. Shear, Bond and Torsion;37. Design of Beams and Slabs; 38. Axially Loaded Columns; 39. Columns with Uniaxial and Biaxial Bending; 40. Design of Stair Cases; 41. Two-way Slabs; 42. Circular Slabs; 43. Yield Line Theory and Design of Slabs; 44. Foundations

Part VI: Prestressed Concrete and Miscellaneous Topics45. Prestressed Concrete; 46. Shrinkage and Creep; 47. Form-Work; 48. Tests For Cement and Concrete.

Bestseller

25,000COPIES SOLD

8

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

ISBN: 81-7008-853-4

EDITION: Sixteenth, 2005

SIZE: 71

49

1

2

′′ × ′′

PAGES: 536

PRICE: ` 350.00

IMPRINT: LP

1. Fundamental Definitions and Concepts; 2. Accuracy and Errors; 3. Linear Measurements;4. Chain Surveying; 5. The Compass; 6. The Theodolite; 7. Traverse Surveying; 8. OmittedMeasurements; 9. Levelling; 10. Contouring; 11. Plane Table Surveying; 12. Calculation ofArea; 13. Measurement of Volume; 14. Minor Instruments;15. Trigonometrical Levelling; 16. Permanent Adjustments ofLevels; 17. Precise Levelling; 18. Permanent Adjustments ofTheodolite; 19. Precise Theodolites; 20. Setting Out Works;21. Special Instruments; 22. Tacheometric Surveying;23. Electronic Theodolites; 24. Electro-Magnetic DistanceMeasurement (EDM).

27. Surveying (Vol. I) Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 978-81-318-0294-6

EDITION: First, 2005

SIZE: 71

49

1

2

′′×

′′

PAGES: 501

PRICE: ` 325.00

IMPRINT: LP

1. Properties of Fluids; 2. Pressure and its Measurement; 3. Hydrostatic Forces on SubmergedSurfaces; 4. Buoyancy and Flotation; 5. Fluid Kinematics; 6. Dimensional Analysis; 7. FluidDynamics; 8. Fluid Flow Measurements; 9. Flow Through Pipes; 10. Viscous Flow; 11. FlowPast Immersed Bodies; 12. Compressible Flow.

26. A Textbook of Fluid Mechanics Dr. R.K. Bansal

ISBN: 81-7008-825-9

EDITION: Fifteenth, 2005

SIZE: 71

49

1

2

′′ × ′′

PAGES: 274

PRICE: ` 195.00

IMPRINT: LP

1. Field Astronomy; 2. Photogrammetric Surveying; 3. Electro-Magnetic DistanceMeasurement (EDM); 4. Remote Sensing; 5. Geographical Information System (GIS).

29. Higher Surveying III Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 81-7008-883-6

EDITION: Fifteenth, 2005

SIZE: 71

49

1

2

′′×

′′

PAGES: 658

PRICE: ` 425.00

IMPRINT: LP

1. Curve Surveying I: Simple Circular Curves; 2. Curve Surveying II: Compound and ReverseCurves; 3. Curve Surveying III: Transition Curves; 4. Curve Surveying IV: Vertical Curves;5. Trigonometrical Levelling; 6. Hydrographic Surveying; 7. MineSurveying; 8. Triangulation; 9. Survey Adjustments and Theory ofErrors; 10. Topographic Surveying; 11. Route Surveying;12. Special Instruments; 13. Field Astronomy; 14. PhotogrammetricSurveying; 15. Electro-Magnetic Distance Measurement (EDM);16. Remote Sensing.

28. Surveying (Vol. II) Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

Bestseller

1,725,000COPIES SOLD

Bestseller

1,60,000COPIES SOLD

Bestseller

1,25,000COPIES SOLD

9

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

CIVIL ENGINEERING

ISBN: 81-7008-791-0

EDITION: Sixteenth, 2005

SIZE: 71

49

1

2

′′ × ′′

PAGES: 916

PRICE: ` 565.00

IMPRINT: LP

[In S.I. Units]Part I: Elementary Properties

1. Introduction; 2. Preliminary Definitions and Relationships; 3. Determination of IndexProperties; 4. Classification of Soils; 5. Soil Structure and Clay Mineralogy

Part II: Soil Hydraulics6. Soil Water: Effective and Neutral Stresses; 7. Permeability; 8. Well Hydraulics; 9. Seep-age Analysis; 10. Seepage Below Hydraulic Structures; 11. Drainage and Dewatering

Part III: Elasticity Applied to Soils12. Elements of Elasticity; 13. Stress Distribution-I; 14. Stress Distribution-II

30. Soil Mechanics and Foundations Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

Part IV: Compressibility15. One Dimensional Consolidation; 16. Three Dimensional Consolidation; 17. Compaction

Part V: Strength and Stability18. Shear Strength; 19. Failure Envelopes; 20. Earth Pressure; 21. Bulkheads and Coffer-Dams; 22. Shafts, Tunnelsand Conduits; 23. Stability of Slopes

Part VI: Foundation Engineering24. Bearing Capacity; 25. Shallow Foundations; 26. Pile Foundations; 27. Well Foundations; 28. Machine Foundations

Part VII: Pavement Design29. Design of Flexible Pavement; 30. Design of Rigid Pavements; 31. Stabilisation of Soils

Part VIII: Miscellaneous Topics32. Site Investigation and Sub-soil Exploration; 33. Advanced Measuring Instruments; 34. Reinforced Earth and Geotextiles

ISBN: 978-81-318-0627-2

EDITION: First, 2005

SIZE: 71

49

1

2

′′×

′′

PAGES: 322

PRICE: ` 250.00

IMPRINT: USP

1. Management Concepts; 2. Business; 3. Function of Management; 4. ProductionManagement; 5. Inventory Control; 6. Introduction to Marketing Management; 7. MarketingSegmentation; 8. Positioning; 9. Marketing Research Management; 10. Marketing Planning;11. Financial Management; 12. Material and Equipment—Introduction, Planning andScheduling; 13. Procurement; 14. Cost Reduction and Material Management; 15. ResourceManagement; 16. Vendor Rating; 17. Buyer-Seller Relationship; 18. Personnel Management—An Overview; 19. Functions of Personnel Management; 20. Man Power Policy and Planning;21. Recruitment and Selection; 22. Training; 23. Performance Appraisal; 24. Wage and SalaryAdministration; 25. Trade Union and Collective Bargaining; 26. Accidents and Safety;27. Absenteeism and Turnover; 28. Grievances; 29. Conflict, Identification and Resolution;30. Construction Management—Planning and Scheduling; 31. Resource Allocation; 32. ProjectManagement Information System; Appendices.

32. Management Concepts for Civil Engineers K. Anbuvelan

ISBN: 978-81-318-0544-2

EDITION: First, 2005

SIZE: 71

49

1

2

′′ × ′′

PAGES: 140

PRICE: ` 125.00

IMPRINT: USP

1. Remote Sensing; 2. EMR Interaction with Atmosphere and Earth Materials; 3. Optical andMicrowave Remote Sensing; 4. Geographic; Information System (GIS); 5. MiscellaneousTopics; Examination Papers.

31. Basics of Remote Sensing and GIS Dr. S. Kumar

Bestseller

2,00,000COPIES SOLD

10

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

ISBN: 978-81-318-0646-3

EDITION: First, 2001

SIZE: 71

49

1

2

′′×

′′

PAGES: 952

PRICE: ` 595.00

IMPRINT: LP

1. Mechanical Properties of Materials; 2. Simple Stresses and Strains; 3. Elastic Constants;4. Analysis of Stress: Principal Stresses; 5. Analysis of Strain: Principal Strains; 6. StrainEnergy, Resilience and Impact Loading; 7. Theories of Elastic Failure ; 8. Centroids andMoments of Inertia of Plane Areas; 9. Shear Force and Bending Moment; 10. Bending Stressesin Beams; 11. Shearing Stresses in Beams; 12. Deflection of Beams : I Double IntegrationMethod; 13. Deflection of Beams: II Area Moment Method; 14. Deflection of Beams : IIIConjugate Beam Method; 15. Deflection of Beams: IV StrainEnergy Method; 16. Fixed Beams; 17. Continuous Beams;18. Combined Direct and Bending Stresses; 19. MasonryStructures (Retaining Walls, Dams and Chimneys); 20. Columns;21. Torsion of Shafts; 22. Springs; 23. Thin Cylinders andSpheres; 24. Thick Cylinders and Spheres; 25. Analysis of PerfectFrames; 26. Riveted Connections; 27. Welded Connections.

36. Mechanics of Materials Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 81-7008-403-2

EDITION: First, 2003

SIZE: 71

49

1

2

′′×

′′

PAGES: 446

PRICE: ` 275.00

IMPRINT: LP

1. Stones; 2. Bricks; 3. Timber; 4. Glass; 5. Cement; 6. Cement Mortar; 7. Cement Concrete;8. RCC, PSC and Ferro-Cement; 9. Steel; 10. Fundamentals of Surveying; 11. Chain Survey;12. Compass Survey; 13. Plane Table Surveying; 14. Levelling; 15. Contouring; 16. BuildingPlans; 17. Foundations; 18. Water Supply and Sanitation.

34. Basic Civil Engineering Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 81-7008-618-3

EDITION: Twelfth, 2004

SIZE: 71

49

1

2

′′ × ′′

PAGES: 648

PRICE: ` 425.00

IMPRINT: LP

Part I: Moving Loads1. Rolling Loads; 2. Influence Lines; 3. Influence Lines for Girders with Floor Beams;4. Influence Lines for Stresses in Frames; 5. The Muller-Breslau Principle

Part II: Statically Indeterminate Structures6. Statically Indeterminate Beams and Frames; 7. The General Method; 8. Three MomentEquation Method; 9. The Slope Deflection Method; 10. Moment Distribution Method; 11. TheColumn Analogy Method; 12. Method of Strain Energy; 13. Deflection of Perfect Frames;14. Redundant Frames ; 15. Cables and Suspension Bridges; 16. Arches

Part III: Miscellaneous Topics17. Welded Joints; 18. Method of Tension Coefficients; 19. Space Frames; 20. Plastic Theory;21. Building Frames; 22. Kani’s Method; 23. Unsymmetrical Bending.

33. Theory of Structures Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 978-81-318-0698-2

EDITION: Fourth, 2002

SIZE: 51

28

1

2

′′ × ′′

PAGES: 250

PRICE: ` 155.00

IMPRINT: LP

1. Project Management; 2. Bar Charts and Milestone Charts; 3. Elements of Network;4. Development of Network; 5. PERT: Time Estimates; 6. PERT: Time Computations; 7. PERT:Network Analysis; 8. CPM: Network Analysis; 9. CPM: Cost Model ; 10. CPM: Updating;11. Resources Allocation.

35. Project Planning and Control with PERT and CPM Dr. B.C. Punmia and K.K. Khandelwal (I.A.S.)

Bestseller

50,000COPIES SOLD

11

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

ISBN: 978-81-318-0594-7

EDITION: First, 1999

SIZE: 71

49

1

2

′′×

′′

PAGES: 265

PRICE: ` 225.00

IMPRINT: USP

1. Formation and Development of Ground; 2. Compaction; 3. Drainage Methods;4. Precompression and Vertical Drains; 5. Vibration Methods; 6. Grouting and Injection;7. Mechanical, Cementing and Chemical Stabilization; 8. Geosynthetics; 9. MiscellaneousMethods.

38. Ground Improvement Techniques (Paper Back) Dr. P. Purushothama Raj

ISBN: 978-81-318-0857-3

EDITION: First, 1999

SIZE: 71

48

1

2

′′×

′′

PAGES: 265

PRICE: ` 750.00

IMPRINT: LP

1. Formation and Development of Ground; 2. Compaction; 3. Drainage Methods;4. Precompression and Vertical Drains; 5. Vibration Methods; 6. Grouting and Injection;7. Mechanical, Cementing and Chemical Stabilization; 8. Geosynthetics; 9. MiscellaneousMethods.

37. Ground Improvement Techniques (Hard Bound) Dr. P. Purushothama Raj

ISBN: 978-81-318-0645-6

EDITION: Second, 1998

SIZE: 71

49

1

2

′′×

′′

PAGES: 1156

PRICE: ` 695.00

IMPRINT: LP

[In S.I. Units]

1. Introduction; 2. Loads and Stresses; 3. Steel Work Connections: I—Riveted Connections;4. Steel Work Connections: II—Bolted and Pinned Connections; 5. Steel Work Connections:III—Welded Connections; 6. Design of Tension Members; 7. Design of Compression Members;8. Design of Flexural Members: Beams; 9. Gantry Girders; 10. Beam Columns; 11. Design ofColumn Bases and Footings; 12. Riveted Beam Connections; 13. Welded Beam Connections;14. Design of Plate Girders; 15. Unsymmetrical Bending; 16. Design of Roof Trusses;17. Design of Round Tubular Structures; 18. Design in Light Gauge Steel; 19. Design ofSteel Chimneys; 20. Design of Steel Tanks; 21. Design of Towers and Masts; 22. InfluenceLines for Stresses in Frames; 23. Space Frames; 24. Multi-storeyBuildings; 25. Industrial Buildings; 26. Plastic Analysis and Design;27. Bridges I: General; 28. Bridges II: Loads & Stresses;29. Bridges III: Plate Girder Bridges; 30. Bridges IV: Truss GirderBridges; 31. Bridges V: End Bearings; 32. Timber Structures;33. Design of Masonry Structures.

39. Comprehensive Design of Steel Structures Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

(Including Air Pollution)1. Introduction; 2. Collection and Conveyance of Sewage; 3. Wastewater Flow Rates;4. Hydraulic Design of Sewers; 5. Construction of Sewers; 6. Sewer Appurtenances; 7. SewagePumping; 8. Wastewater Characteristics; 9. Natural Methods of Waste Water Disposal; 10. UnitOperations for Waste Water Treatment; 11. Preliminary Treatment; 12. Sedimentation andChemical Clarification; 13. Biological Treatment—I: Sewage Filtration; 14. BiologicalTreatment—II: Activated Sludge Process; 15. Biological Treatment—III: MiscellaneousMethods; 16. Treatment and Disposal of Sludge; 17. Septic and Imhoff Tanks; 18. AdvancedWaste Water Treatment ; 19. Industrial Wastewater Treatment; 20. House Drainage; 21. RuralSanitation; 22. Solid Waste Disposal; 23. Air Pollution.

40. Environmental Engineering—2: Wastewater Engineering Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 978-81-318-0596-1

EDITION: Second, 1998

SIZE: 51

28

1

2

′′×

′′

PAGES: 660

PRICE: ` 325.00

IMPRINT: LP

Bestseller

60,000COPIES SOLD

12

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

ISBN: 978-81-318-0703-3

EDITION: Second, 1995

SIZE: 51

28

1

2

′′ × ′′

PAGES: 584

PRICE: ` 325.00

IMPRINT: LP

1. Water Systems; 2. Hydrology; 3. Surface Source; 4. Ground Water: Wells; 5. Water Demandand Quantity; 6. Quality of Water; 7. Unit Operations; 8. Screening and Aeration;9. Sedimentation; 10. Filtration; 11. Disinfection; 12. Water Softening; 13. MiscellaneousTreatment Methods; 14. Pumps and Pumping; 15. Conveyance of Water; 16. Distribution ofWater; 17. Water Supply for Buildings.

43. Environmental Engineering—I: Water Supply Engineering Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

ISBN: 978-81-318-0715-6

EDITION: First, 1995

SIZE: 71

49

1

2

′′×

′′

PAGES: 153

PRICE: ` 125.00

IMPRINT: USP

1. Determination of Moisture Content; 2. Determination of Specific Gravity; 3. Determinationof Bulk Density and Dry Density; 4. Determination of Specific Gravity by Pycnometer;5. Determination of Specific Gravity and Water Content; 6. Field Density Test; 7. Grain SizeAnalysis; 8. Determination of Consistency Limits; 9. I.S. Light Compaction Test; 10. DensityIndex Test; 11. Permeability Test; (a) Constant Head (b) Falling Head; 12. Vane Shear Test;13. Shear Shear Test ; 14. Unconfined Compression Test; 15. Undrained Triaxial Test;16. Consolidation Test; 17. California Bearing Ratio Test; 18. Question Bank.

42. Soil Testing (Laboratory Manual and Question Bank) K.V.S. Apparao and V.C.S. Rao

ISBN: 81-7008-086-X

EDITION: Second, 1997

SIZE: 51

28

1

2

′′×

′′

PAGES: 259

PRICE: ` 200.00

IMPRINT: LP

1. Introduction; 2. Probability; 3. Some Characteristics of Distributions; 4. ContinuousDistributions; 5. Discrete Distributions; 6. Estimation and Probability Plotting; 7. Correlationand Regression; 8. Stochastic Processes; 9. Autocorrelation Analysis; 10. Spectral Analysis;11. Univariate Stochastic Models; 12. Multivariate Stochastic Models; 13. Generation ofRandom Variates.

41. Stochastic Hydrology (Hard Bound) Dr. P. Jaya Rami Reddy

ISBN: 978-81-318-0644-9

EDITION: Seventh, 1992

SIZE: 51

28

1

2

′′ × ′′

PAGES: 1140

PRICE: ` 475.00

IMPRINT: LP

Part I: Beams and Slabs1. Introduction; 2. Theory of Reinforced Beams and Slabs; 3. Shear and Bond; 4. Torsion;5. Doubly Reinforced Beams; 6. T and L-Beams; 7. Design of Beams and Slabs; 8. Design ofStair Cases; 9. Reinforced Brick and Hollow Tile Roofs; 10. Two-way Slabs; 11. CircularSlabs; 12. Flat Slabs

Part II: Compression Members13. Axially Loaded Columns; 14. Combined Direct and Bending Stresses

Part III: Foundations and Retaining Structures15. Continuous and Isolated Footings; 16. Combined Footings; 17. Pile Foundations;18. Retaining Walls

Part IV: Water Tanks and Miscellaneous Structures

44. Reinforced Concrete Structures (Vol. I) Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain

19. Domes; 20. Water Tanks-I; 21. Form-Work; 22. Tests for Cement and ConcretePart V: Limit State Design Method

23. Design Concepts; 24. Singly Reinforced Sections; 25. Doubly Reinforced Sections; 26. T and L-Beams; 27. Shear Bond and Torsion; 28. Designof Beams and Slabs; 29. Design of Columns; 30. Miscellaneous Designs; 31. Yield Line Theory and Design of Slabs.

13

More TitlesCIVIL ENGINEERING

C-11/catalogue job 3/civ2 20-2-13

ISBN: 978-81-318-0666-1

EDITION: Fifth, 1992

SIZE: 51

28

1

2

′′ × ′′

PAGES: 1144

PRICE: ` 525.00

IMPRINT: LP

Part I: Water Tanks1. Beams Curved in Plan; 2. Domes; 3. Circular and INTZE Tanks; 4. Rectangular Tanks;5. Underground Tanks

Part II: Pipes, Silos and Chimneys6. Reinforced Concrete Pipes; 7. Bunkers and Silos; 8. Chimneys

Part III: Concrete Frames9. Portal Frames; 10. Building Frames

Part IV: Concrete Bridges11. Aqueducts and Box Culverts; 12. Concrete Bridges

Part V: Limit State Method13. Design Concepts; 14. Singly Reinforced Sections; 15. Doubly Reinforced Sections;16. T and L-Beams; 17. Shear, Bond and Torsion; 18. Design of Beams and Slabs 19. AxiallyLoaded Columns; 20. Columns with Uniaxial and Biaxial Bending; 21. Design of Stair Cases;22. Two-way Slabs; 23. Circular Slabs; 24. Yield Line Theory and Design of Slabs; 25. Foun-dations

Part VI: Prestressed Concrete and Miscellaneous Topics26. Prestressed Concrete; 27. Shrinkage and Creep.

45. Reinforced Concrete Structures (Vol. II) Dr. B.C. Punmia, Ashok Kumar Jain & Arun Kumar Jain