View
226
Download
0
Category
Preview:
Citation preview
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 1/42
Command pada tugas autocad yang saya buat terdiri dari empat tahapan penge-save-an.
COMMAND PERTAMA AN! D" #A$E
Regenerating mode%.
AutoCAD menu uti%ities %oaded.
Command& #'NPROPERT"E#
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& /0/
#peci(y other corner point or )Area*Dimensions*Rotation& 12/02
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3302
#peci(y other corner point or )Area*Dimensions*Rotation& 1403
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3204
#peci(y other corner point or )Area*Dimensions*Rotation& 1205/
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3604
#peci(y other corner point or )Area*Dimensions*Rotation& 1505/
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3604
#peci(y other corner point or )Area*Dimensions*Rotation& 1503
Command&
Command&
Command& 7saveas
Command& rec
RECTAN!
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 2/42
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 32054
#peci(y other corner point or )Area*Dimensions*Rotation& 1202
Command& 8 9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7B#A$E
Command& #peci(y opposite corner&
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 32054
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3/04
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
3/.4054
#peci(y other corner point or )Area*Dimensions*Rotation& 15.402
Command& rec
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 3/42
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
33.4054
#peci(y other corner point or )Area*Dimensions*Rotation&
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 RECTAN!
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 RECTAN!
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 RECTAN!
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 35.4
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 4/42
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
35.4054
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
35.4054
#peci(y other corner point or )Area*Dimensions*Rotation& 15.402
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7B#A$E
Command& #peci(y opposite corner&
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 33054
#peci(y other corner point or )Area*Dimensions*Rotation& 1/.402
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7(i%%et
Current settings& Mode TR"M0 Radius /.////
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e& r
#peci(y (i%%et radius @/.////& /.34
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 5/42
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e&
#e%ect second ob?ect or shi(t-se%ect to app%y corner&
Command& (i%%et
Current settings& Mode TR"M0 Radius /.34//
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e& r
#peci(y (i%%et radius @/.34//& /.34
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e&
#e%ect second ob?ect or shi(t-se%ect to app%y corner&
Command&
Command&
Command& 7B#A$E
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
35.405G.4
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
32.405G.4
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
52.405G.4
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 6/42
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
52.405G.4
#peci(y other corner point or )Area*Dimensions*Rotation& 1H0/.I4
Command&
Command&
Command& 7B#A$E
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 7/42
COMMAND JED'A AN! D" #A$E
Command&
Command&
Command& 7B#A$E
Command& #peci(y opposite corner&
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Regenerating mode%.
Command&
Command&
Command& 7B#A$E
Command& po%ygon
Enter number o( sides @6& 2
#peci(y center o( po%ygon or )Edge& /0/
Enter an option )"nscribed in circ%e*Circumscribed about circ%e @"& "
#peci(y radius o( circ%e& 5
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& rotate
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 8/42
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @/& K/
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 ROTATE
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 MO$E
Command&
Command&
Command& 7.mredo Enter number o( actions or )A%%*ast& 5 MO$E
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point& 64
#peci(y rotation ang%e or )Copy*Re(erence @/&
Command& 7u ROTATE
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 9/42
#e%ect ob?ects&
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @/&
Command& #peci(y opposite corner&
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @3H3&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @24/&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 10/42
@use (irst point as disp%acement&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 5 tota%
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& /0/
#peci(y other corner point or )Area*Dimensions*Rotation& 140/.4
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command&
Command&
Command& 7B#A$E
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects& Cance%
Command& trim
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 11/42
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& L78oom
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& 3>
Resuming TR"M command.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& #peci(y opposite corner&
No ob?ects crossed by crossing :indo:.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects& 5 (ound0 3 tota%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 12/42
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command&
Command& 7B#A$E
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command& (i%%et
Current settings& Mode TR"M0 Radius /.34//
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e& r
#peci(y (i%%et radius @/.34//& /.4
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e&
#e%ect second ob?ect or shi(t-se%ect to app%y corner&
Command& (i%%et
Current settings& Mode TR"M0 Radius /.4///
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e& r
#peci(y (i%%et radius @/.4///&
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e&
#e%ect second ob?ect or shi(t-se%ect to app%y corner&
Command&
Command&
Command& 7B#A$E
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
32.405H
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 13/42
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
#peci(y other corner point or )Area*Dimensions*Rotation& 1205/
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Command& #peci(y opposite corner&
Command&
Command&
Command&
Command& 7copyc%ip 5 (ound
Command&
Command&
Command& 7pastec%ip #peci(y insertion point& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3605H
#peci(y other corner point or )Area*Dimensions*Rotation& 1505/
Command&
Command&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 14/42
Command& 7B#A$E
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3203H
#peci(y other corner point or )Area*Dimensions*Rotation& 1205
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7cham(er
;TR"M mode= Current cham(er Dist5 /.////0 Dist3 /.////
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& r
"nva%id se%ection
E>pects a point or
indo:*ast*Crossing*FO<*+ence*Po%ygon*CPo%ygon*'ndo*Po%y%ine*Distance*Ang%e*Tr
im*mEthod
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& 7u
Command has been comp%ete%y undone.
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e&
Cance%
Command&
Command&
Command& 7cham(er
;TR"M mode= Current cham(er Dist5 /.////0 Dist3 /.////
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& d
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 15/42
#peci(y (irst cham(er distance @/.////& 5
#peci(y second cham(er distance @5.////& 2
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e&
#e%ect second %ine or shi(t-se%ect to app%y corner&
Command& mirror
#e%ect ob?ects& 5 (ound
#e%ect ob?ects& Cance%
Command&
Command&
Command& 7cham(er
;TR"M mode= Current cham(er Dist5 5.////0 Dist3 2.////
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& d
#peci(y (irst cham(er distance @5.////&
#peci(y second cham(er distance @2.////&
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e&
#e%ect second %ine or shi(t-se%ect to app%y corner&
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7B#A$E
Command& #peci(y opposite corner&
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 16/42
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3203K
#peci(y other corner point or )Area*Dimensions*Rotation& 1206
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects& 5 (ound0 3 tota%
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 17/42
COMMAND JET"!A AN! D" #A$E
Command& #peci(y opposite corner&
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Regenerating mode%.
Command&
Command&
Command& 7B#A$E
Command& po%ygon
Enter number o( sides @6& 2
#peci(y center o( po%ygon or )Edge& /0/
Enter an option )"nscribed in circ%e*Circumscribed about circ%e @"& "
#peci(y radius o( circ%e& 5
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 18/42
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @/& K/
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 ROTATE
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 MO$E
Command&
Command&
Command& 7.mredo Enter number o( actions or )A%%*ast& 5 MO$E
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point& 64
#peci(y rotation ang%e or )Copy*Re(erence @/&
Command& 7u ROTATE
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @/&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 19/42
Command& #peci(y opposite corner&
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @3H3&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& rotate
Current positive ang%e in 'C#& AN!D"Rcounterc%oc,:ise AN!FA#E/
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point&
#peci(y rotation ang%e or )Copy*Re(erence @24/&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& move
#e%ect ob?ects& 5 (ound
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 20/42
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 5 tota%
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& /0/
#peci(y other corner point or )Area*Dimensions*Rotation& 140/.4
Command& move
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
#peci(y base point or )Disp%acement @Disp%acement& #peci(y second point or
@use (irst point as disp%acement&
Command&
Command&
Command& 7B#A$E
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects& Cance%
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 21/42
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& L78oom
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& 3>
Resuming TR"M command.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& #peci(y opposite corner&
No ob?ects crossed by crossing :indo:.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects& 5 (ound0 3 tota%
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 22/42
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command&
Command& 7B#A$E
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command& (i%%et
Current settings& Mode TR"M0 Radius /.34//
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e& r
#peci(y (i%%et radius @/.34//& /.4
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e&
#e%ect second ob?ect or shi(t-se%ect to app%y corner&
Command& (i%%et
Current settings& Mode TR"M0 Radius /.4///
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e& r
#peci(y (i%%et radius @/.4///&
#e%ect (irst ob?ect or )'ndo*Po%y%ine*Radius*Trim*Mu%tip%e&
#e%ect second ob?ect or shi(t-se%ect to app%y corner&
Command&
Command&
Command& 7B#A$E
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
32.405H
#peci(y other corner point or )Area*Dimensions*Rotation& Cance%
Command& rec
RECTAN!
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 23/42
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
#peci(y other corner point or )Area*Dimensions*Rotation& 1205/
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Command& #peci(y opposite corner&
Command&
Command&
Command&
Command& 7copyc%ip 5 (ound
Command&
Command&
Command& 7pastec%ip #peci(y insertion point& Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth&
Cance%
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3605H
#peci(y other corner point or )Area*Dimensions*Rotation& 1505/
Command&
Command&
Command& 7B#A$E
Command& rec
RECTAN!
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 24/42
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3203H
#peci(y other corner point or )Area*Dimensions*Rotation& 1205
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7cham(er
;TR"M mode= Current cham(er Dist5 /.////0 Dist3 /.////
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& r
"nva%id se%ection
E>pects a point or
indo:*ast*Crossing*FO<*+ence*Po%ygon*CPo%ygon*'ndo*Po%y%ine*Distance*Ang%e*Tr
im*mEthod
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& 7u
Command has been comp%ete%y undone.
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e&
Cance%
Command&
Command&
Command& 7cham(er
;TR"M mode= Current cham(er Dist5 /.////0 Dist3 /.////
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& d
#peci(y (irst cham(er distance @/.////& 5
#peci(y second cham(er distance @5.////& 2
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 25/42
#e%ect second %ine or shi(t-se%ect to app%y corner&
Command& mirror
#e%ect ob?ects& 5 (ound
#e%ect ob?ects& Cance%
Command&
Command&
Command& 7cham(er
;TR"M mode= Current cham(er Dist5 5.////0 Dist3 2.////
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e& d
#peci(y (irst cham(er distance @5.////&
#peci(y second cham(er distance @2.////&
#e%ect (irst %ine or )'ndo*Po%y%ine*Distance*Ang%e*Trim*mEthod*Mu%tip%e&
#e%ect second %ine or shi(t-se%ect to app%y corner&
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7B#A$E
Command&
Command&
Command& 7B#A$E
Command& #peci(y opposite corner&
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command& rec
RECTAN!
#peci(y (irst corner point or )Cham(er*E%evation*+i%%et*Thic,ness*idth& 3203K
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 26/42
#peci(y other corner point or )Area*Dimensions*Rotation& 1206
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects& 5 (ound0 3 tota%
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
Command&
Command&
Command& 7B#A$E
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 27/42
COMMAND JEEMPAT AN! D" #A$E
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& L78oom
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& 3>
Resuming TR"M command.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 28/42
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command&
Command&
Command& 7.undo Current settings& Auto On0 Contro% A%%0 Combine es0
ayer es
Enter the number o( operations to undo or )Auto*Contro%*FEgin*End*Mar,*Fac,
@5& 5 TR"M
Command& L78oom
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& 3>
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects& Cance%
Command& trim
Current settings& Pro?ection'C#0 EdgeNone
#e%ect cutting edges ...
#e%ect ob?ects or @se%ect a%%& 5 (ound
#e%ect ob?ects&
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 29/42
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 30/42
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo&
No intersections in the interior o( the curve.
#e%ect ob?ect to trim or shi(t-se%ect to e>tend or
)+ence*Crossing*Pro?ect*Edge*eRase*'ndo& Cance%
Command&
Command& 7erase
#e%ect ob?ects& 5 (ound
#e%ect ob?ects&
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7ai7se%a%% #e%ecting ob?ects...done.
Command& pedit
#e%ect po%y%ine or )Mu%tip%e&
Enter an option )C%ose*oin*idth*Edit verte>*+it*#p%ine*Decurve*type
gen*Reverse*'ndo&
#e%ect ob?ects& 5 (ound
#e%ect ob?ects& 5 (ound0 3 tota%
#e%ect ob?ects& 5 (ound0 2 tota%
#e%ect ob?ects& 5 (ound0 6 tota%
#e%ect ob?ects& 5 (ound0 4 tota%
#e%ect ob?ects& #peci(y opposite corner& / (ound
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 31/42
#e%ect ob?ects& 5 (ound0 G tota%
#e%ect ob?ects& 5 (ound0 I tota%
#e%ect ob?ects& 5 (ound0 H tota%
#e%ect ob?ects& 5 (ound0 K tota%
#e%ect ob?ects& 5 (ound0 5/ tota%
#e%ect ob?ects& 5 (ound0 55 tota%
#e%ect ob?ects& 5 (ound0 53 tota%
#e%ect ob?ects& 5 (ound0 52 tota%
#e%ect ob?ects& 5 (ound0 56 tota%
#e%ect ob?ects& 5 (ound0 54 tota%
#e%ect ob?ects& 5 (ound0 5G tota%
#e%ect ob?ects& 5 (ound0 5I tota%
#e%ect ob?ects& 5 (ound0 5H tota%
#e%ect ob?ects& 5 (ound0 5K tota%
#e%ect ob?ects& 5 (ound0 3/ tota%
#e%ect ob?ects& 5 (ound0 35 tota%
#e%ect ob?ects& 5 (ound0 33 tota%
#e%ect ob?ects& 5 (ound0 32 tota%
#e%ect ob?ects& 5 (ound0 36 tota%
#e%ect ob?ects& 5 (ound0 34 tota%
#e%ect ob?ects& 5 (ound0 3G tota%
#e%ect ob?ects& 5 (ound0 3I tota%
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 3I tota%
#e%ect ob?ects& L78oom
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& 3>
Resuming PED"T command.
#e%ect ob?ects& 5 (ound0 3H tota%
#e%ect ob?ects& 5 (ound0 3K tota%
#e%ect ob?ects& 5 (ound0 2/ tota%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 32/42
#e%ect ob?ects& 5 (ound0 25 tota%
#e%ect ob?ects& 5 (ound0 23 tota%
#e%ect ob?ects& 5 (ound0 22 tota%
#e%ect ob?ects& 5 (ound0 26 tota%
#e%ect ob?ects& 5 (ound0 24 tota%
#e%ect ob?ects& 5 (ound0 2G tota%
#e%ect ob?ects& 5 (ound0 2I tota%
#e%ect ob?ects& 5 (ound0 2H tota%
#e%ect ob?ects& 5 (ound0 2K tota%
#e%ect ob?ects& 5 (ound0 6/ tota%
#e%ect ob?ects& 5 (ound0 65 tota%
#e%ect ob?ects& 5 (ound0 63 tota%
#e%ect ob?ects& 5 (ound0 62 tota%
#e%ect ob?ects& 5 (ound0 66 tota%
#e%ect ob?ects& 5 (ound0 64 tota%
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 64 tota%
#e%ect ob?ects& 5 (ound0 6G tota%
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 6G tota%
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 6G tota%
#e%ect ob?ects& #peci(y opposite corner& 5 (ound0 6I tota%
#e%ect ob?ects& 5 (ound0 6H tota%
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 6H tota%
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 6H tota%
#e%ect ob?ects& 5 (ound ;5 dup%icate=0 6H tota%
#e%ect ob?ects& 5 (ound0 6K tota%
#e%ect ob?ects& 5 (ound0 4/ tota%
#e%ect ob?ects& 5 (ound0 45 tota%
#e%ect ob?ects&
/ segments added to po%y%ine
Enter an option )C%ose*oin*idth*Edit verte>*+it*#p%ine*Decurve*type
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 33/42
gen*Reverse*'ndo&
#e%ect ob?ects& 5 (ound
#e%ect ob?ects& 5 (ound0 3 tota%
#e%ect ob?ects& 5 (ound0 2 tota%
#e%ect ob?ects& 5 (ound0 6 tota%
#e%ect ob?ects& 5 (ound0 4 tota%
#e%ect ob?ects& 5 (ound0 G tota%
#e%ect ob?ects& 5 (ound0 I tota%
#e%ect ob?ects& 5 (ound0 H tota%
#e%ect ob?ects& 5 (ound0 K tota%
#e%ect ob?ects& 5 (ound0 5/ tota%
#e%ect ob?ects& 5 (ound0 55 tota%
#e%ect ob?ects& 5 (ound0 53 tota%
#e%ect ob?ects& 5 (ound0 52 tota%
#e%ect ob?ects& 5 (ound0 56 tota%
#e%ect ob?ects& 5 (ound0 54 tota%
#e%ect ob?ects& 5 (ound0 5G tota%
#e%ect ob?ects& 5 (ound0 5I tota%
#e%ect ob?ects& 5 (ound0 5H tota%
#e%ect ob?ects& 5 (ound0 5K tota%
#e%ect ob?ects& 5 (ound0 3/ tota%
#e%ect ob?ects& 5 (ound0 35 tota%
#e%ect ob?ects& 5 (ound0 33 tota%
#e%ect ob?ects& #peci(y opposite corner& / (ound
#e%ect ob?ects& 5 (ound0 32 tota%
#e%ect ob?ects& 5 (ound0 36 tota%
#e%ect ob?ects& 5 (ound0 34 tota%
#e%ect ob?ects& 5 (ound0 3G tota%
#e%ect ob?ects& 5 (ound0 3I tota%
#e%ect ob?ects& 5 (ound0 3H tota%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 34/42
#e%ect ob?ects& 5 (ound0 3K tota%
#e%ect ob?ects& 5 (ound0 2/ tota%
#e%ect ob?ects& #peci(y opposite corner& 5 (ound0 25 tota%
#e%ect ob?ects& 5 (ound0 23 tota%
#e%ect ob?ects& 5 (ound0 22 tota%
#e%ect ob?ects& 5 (ound0 26 tota%
#e%ect ob?ects& 5 (ound0 24 tota%
#e%ect ob?ects& 5 (ound0 2G tota%
#e%ect ob?ects& 5 (ound0 2I tota%
#e%ect ob?ects& 5 (ound0 2H tota%
#e%ect ob?ects& 5 (ound0 2K tota%
#e%ect ob?ects& 5 (ound0 6/ tota%
#e%ect ob?ects& 5 (ound0 65 tota%
#e%ect ob?ects& 5 (ound0 63 tota%
#e%ect ob?ects& 5 (ound0 62 tota%
#e%ect ob?ects& 5 (ound0 66 tota%
#e%ect ob?ects& 5 (ound0 64 tota%
#e%ect ob?ects& 5 (ound0 6G tota%
#e%ect ob?ects& 5 (ound0 6I tota%
#e%ect ob?ects& 5 (ound0 6H tota%
#e%ect ob?ects& 5 (ound0 6K tota%
#e%ect ob?ects& 5 (ound0 4/ tota%
#e%ect ob?ects&
/ segments added to po%y%ine
Enter an option )C%ose*oin*idth*Edit verte>*+it*#p%ine*Decurve*type
gen*Reverse*'ndo&
#e%ect ob?ects&
Enter an option )C%ose*oin*idth*Edit verte>*+it*#p%ine*Decurve*type
gen*Reverse*'ndo&
Command&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 35/42
Command& #peci(y opposite corner&
Command& 8
9OOM
#peci(y corner o( :indo:0 enter a sca%e (actor ;n< or n<P=0 or
)A%%*Center*Dynamic*E>tents*Previous*#ca%e*indo:*Ob?ect @rea% time& e
Command&
Command&
Command& 7B#A$E
Customi8ation (i%e %oaded success(u%%y. Customi8ation !roup& ACAD
Customi8ation (i%e %oaded success(u%%y. Customi8ation !roup& C'#TOM
Customi8ation (i%e %oaded success(u%%y. Customi8ation !roup& "MPRE##"ON
Customi8ation (i%e %oaded success(u%%y. Customi8ation !roup& A'TODE#J#EEJ
Customi8ation (i%e %oaded success(u%%y. Customi8ation !roup& E<PRE##
Opening an AutoCAD 3//I*T 3//I (ormat (i%e.
Regenerating mode%.
C&Program +i%esAutoCAD 3/5/AcaunchN+.ar> is an inva%id AR< (i%e.
AutoCAD menu uti%ities %oaded.
Autodes, D!. This (i%e is a TrustedD! %ast saved by an Autodes, app%ication
or Autodes, %icensed app%ication.
Command& COMMAND"NE
Command& #peci(y opposite corner& Cance%
Command& presspu%%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 36/42
C%ic, inside bounded areas to press or pu%%.
/ %oops e>tracted.
/ Regions created.
Command& #peci(y opposite corner&
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
Command& Cance%
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
/ %oops e>tracted.
/ Regions created.
Command& #peci(y opposite corner&
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
4
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 37/42
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
4
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
4
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
4
Command& presspu%%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 38/42
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
4
Command&
Command&
Command& 7vscurrent
Enter an option )3d:ire(rame*2d:ire(rame*2didden*Rea%istic*Conceptua%*Other
@3d:ire(rame& 7R
Command&
Command&
Command& 7vscurrent
Enter an option )3d:ire(rame*2d:ire(rame*2didden*Rea%istic*Conceptua%*Other
@Rea%istic& 7C
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7s:iso
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7top
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 39/42
5 Region created.
4
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
4
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
4
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7s:iso
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7top
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 40/42
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
Command& ?oin
#e%ect source ob?ect&
ine0 open po%y%ine0 arc0 e%%iptica% arc0 or open sp%ine e>pected. #e%ect a
supported ob?ect&
#e%ect ob?ects to ?oin to source& 5 (ound
#e%ect ob?ects to ?oin to source& 5 (ound0 3 tota%
#e%ect ob?ects to ?oin to source& 5 (ound0 2 tota%
#e%ect ob?ects to ?oin to source&
2 segments added to po%y%ine
Command& presspu%%
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted.
5 Region created.
3.4
Command&
PRE##P'
C%ic, inside bounded areas to press or pu%%.
Command&
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 41/42
Command&
Command& 7vscurrent
Enter an option )3d:ire(rame*2d:ire(rame*2didden*Rea%istic*Conceptua%*Other
@Conceptua%& 7C
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7neiso
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7n:iso
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7neiso
Command&
Command&
Command& 7-vie: Enter an option
)*De%ete*Orthographic*Restore*#ave*sEttings*indo:& 7seiso
Command& 7u "NTE"9OOM
Command& 7u #E "sometric !RO'P
Command& 7u NE "sometric !RO'P
Command& 7u N "sometric !RO'P
Command& 7u NE "sometric !RO'P
Command& 7u Conceptua% $isua% #ty%e !RO'P
Command& 7u PRE##P'
Command& 7u PRE##P'
Command& presspu%%
7/23/2019 Command Bor Duduk
http://slidepdf.com/reader/full/command-bor-duduk 42/42
C%ic, inside bounded areas to press or pu%%.
5 %oop e>tracted
5 Region created.
I
Recommended