View
224
Download
4
Category
Preview:
Citation preview
Competition Product Catalog
Photo by: Brad Malmgren Photography
Photo by: Gary Walton
Photo by: Patti Wierzbicki - J & J Promotions
Cardell
Photo by: Brad Malmgren Photography
STEEL CHISEL TOOTH™ TRACTION MASTER®
48 studs and lock nuts(1.325” packs contain Big Nuts)Size Thread PKG#.750” 7mm CAP-7500 .875” 7mm CAP-8750 .920” 7mm CAP-9200 1.000” 7mm CAP-1000 1.060” 7mm CAP-1060 1.200” 7mm CAP-1200 1.075” 5/16” CAP-1075 1.200” 5/16” CAP-12051.325” 5/16” CAP-1325-S
T-NUT STYLE 48 studs only Size Thread PKG#.750” 1/4”-20 CLT-7500 1.060” 7mm CLT-1060
STEEL CHISEL TOOTH™
WIDE BODY STEEL CHISEL TOOTH™
T-NUT STYLE 48 studs onlySize Thread PKG#1.060” 7mm CWB-1060
Chisel Tooth™ - sold by piece onlySize Thread PKG#1.060” 7mm TCL-1067 Wide Body Chisel Tooth™ - sold by piece onlySize Thread PKG#1.060” 7mm TWB-1067 Sold by piece onlyBuild to order. Additional titanium product available if ordered by Sept. 30th. Contact mike@wiem.com for more info.
TITANIUM STUDS
CHISEL TOOTH™ HOOKER®
48 studs onlySize Thread PKG#.800” 1/4”-20 HCL-8000
45° MODIFIED GOLD DIGGER® CARBIDE TRACTION MASTER®
48 studs and 48 lock nuts(1.325” & 1.450” contain Big Nuts)Size Thread PKG#.750” 7mm GDP-750M .875” 7mm GDP-875M .920” 7mm GDP-920M 1.075” 5/16” GDP-107M 1.175” 5/16” GDP-117M 1.325” 5/16” GDP-132M-S 1.450” 5/16” GDP-145M-S
30° ELIMINATOR™ STEEL TRACTION MASTER®
48 studs and lock nutsSize Thread PKG#.700” 1/4”-28 GEP-7000 .750” 1/4”-28 GEP-7500 .875” 1/4”-28 GEP-8750 .920” 1/4”-28 GEP-9200 1.060” 1/4”-28 GEP-1060 1.000” 7mm GEP-1007 1.200” 7mm GEP-1207 1.325” 5/16” GEP-1325-S
Competition Studs
Copyright © 2006-14 IEM. All rights reserved.
STEEL CHISEL TOOTH™ 48 studs and Big NutsSize Thread PKG#1.630” 5/16” CAP-16301.860” 5/16” CAP-1860
Sold by piece only Size Thread PKG#1.880” 5/16” HRS-1880
HOLLOW SNOCROSS / HILL DRAG Two piece Construction - 60˚ Carbide (30% lighter than Snocross 1.860” stud)
SNAP-OFF® STYLE 48 studs only1.060” 7mm CLTX-1060
NEW
T-NUT STYLE 48 studs onlySize Thread PKG#.700” 1/4”-20 GEL-7000 .750” 1/4”-20 GEL-7500 1.060” 7mm GEL-1067 Slim Profile.820” 1/4”-20 GELS-8200 .920” 1/4”-20 GELS-9200
30° ELIMINATOR™ STEEL
40° STEEL HOOKER® ELIMINATOR™
48 studs onlySize Thread PKG#.440” 1/4”-20 HST-4400 .500” 1/4”-20 HST-5000 .575” 1/4”-20 HST-5751 .675” 1/4”-20 HST-5761 .800” 1/4”-20 HEP-8000 .900” 1/4”-20 HEP-9000
Standard package - 24 ea. of studs & Big NutsSize Thread PKG#1.325” 5/16” MEG-1325-S 1.450” 5/16” MEG-1450-S 1.575” 5/16” MEG-1575-L 1.740” 5/16” MEG-1740-L Bulk package - 96 ea. of studs & Big Nuts1.325” 5/16” MEG-1325-BS 1.450” 5/16” MEG-1450-BS 1.575” 5/16” MEG-1575-BL 1.740” 5/16” MEG-1740-BL
SNOCROSS 60˚ MEGA-BITE®
Bulk package - 96 ea. of studs & Big Nuts Size Thread PKG#1.860” 5/16” RACE-1860-BL 24 & 1000 pc. pkgs available upon request
SNOCROSS 60˚ 1.860”
For studding templates/patterns visit our website at www.WoodysTraction.com, or
call our tech line at 989-689-4911
The 1.860” stud is the correct length for 1.750” lug tracks that come stock on 2006-2015 Ski-Doo, Polaris and Arctic Cat sleds.
3
TRIGGER™ 48 studs and lock nuts(1.450” - 1.860” contain Big Nuts)Size Thread PKG#1.075” 5/16” TRIG-10751.325” 5/16” TRIG-13251.450” 5/16” TRIG-1450-S1.630” 5/16” TRIG-1630-S 1.860” 5/16” TRIG-1860-S---1.860 for Up Hill Drags NOT for Sno-X application
GRAND MASTER PRO™
60° MODIFIED 48 studs and 48 lock nuts(1.325” - 1.575” contain Big Nuts)Size Thread PKG#1.075” 5/16” GMPP-1075-48 1.325” 5/16” GMPP-1325-48 1.450” 5/16” GMPP-1450-481.575” 5/16” GMPP-1575-48
For single-ply tracks only. Must use Grand Digger® support plates. 48 piece package PKG#Round ARG-3775-48 Square ASG-3775-48 Double ADG-3775-48 Combo ARGC-3775-48
SNAP-OFF® STYLE 48 studs onlySize Thread PKG# 1.000” 1/4”-20 GELX-1000
RACE SCREWSize Qty PKG#1.500” 1 RASC-1550-0 1.500” 100 RASC-1550-B
5/16” and 7mm SQUARE DIGGER® SUPPORT PLATES7mm Square aluminum support platesHole QTY PKG#7mm 24 ASW-3725 7mm 96 ASW-3725-B 7mm 144 ASW-3725-C 7mm 1000 ASW-3725-M5/16” Square aluminum support plates5/16” 24 ASW2-3775 5/16” 96 ASW2-3775-B 5/16” 144 ASW2-3775-C 5/16” 1000 ASW2-3775-M
5/16” ROUND DIGGER® ALUMINUM SUPPORT PLATES5/16” Round aluminum support platesHole QTY PKG#5/16” 24 AWA-3775 5/16” 96 AWA-3775-B 5/16” 144 AWA-3775-C 5/16” 1000 AWA-3775-M
5/16” COLORED SQUARE DIGGER®
SUPPORT PLATES5/16” Aluminum support platesColor PKG# Green ASW2-3780 Red ASW2-3790 Blue ASW2-3795 Yellow ASW2-3800 Black ASW2-3810 White ASW2-3815Available in quantities of 24, 96, 144 and 1,000 piece packages.
5/16” COLORED ROUND DIGGER® SUPPORT PLATES5/16” Aluminum support platesColor Hole QTY PKG#Green 5/16” 48 AWA-3780 Red 5/16” 48 AWA-3790 Blue 5/16” 48 AWA-3795 Yellow 5/16” 48 AWA-3800 Black 5/16” 48 AWA-3810 White 5/16” 48 AWA-3815
DOUBLE DIGGER® ALUMINUM SUPPORT PLATESHole QTY PKG#7mm 12 ADD-3725 7mm 48 ADD-3725-B 5/16” 12 ADD2-3775 5/16” 48 ADD2-3775-B Thin Double Digger®
Hole QTY PKG# 5/16” 1 ADDT-3775-0
5/16” COLORED DOUBLE DIGGER® SUPPORT PLATES5/16” Aluminum support platesColor Hole QTY PKG#Green 5/16” 48 ADD2-3780 Red 5/16” 48 ADD2-3790 Blue 5/16” 48 ADD2-3795 Yellow 5/16” 48 ADD2-3800 Black 5/16” 48 ADD2-3810 White 5/16” 48 ADD2-3815
5/16” SHALLOW SOCKET TOOLWoody’s developed a unique shallow socket for installing studs that provides the torque to tighten without touching the surface of the support plate. Works ideal with colored support plates. Deep enough to install studs up to 1.575” length.PKG# SCW-4505
Support Plates
DO NOT USE WITH STUDS LONGER THAN 1.000”
Material QTY PKG#Aluminum 24 AWA-3700 Aluminum 96 AWA-3700-B Aluminum 1000 AWA-3700-M
7mm ROUND DIGGER®
SUPPORT PLATES
7mmMaterial QTY PKG#Aluminum 12 AWL-3750 Aluminum 48 AWL-3750-B
BENDER STUD MATE®
SINGLE BENDER STUD MATE®
7mmMaterial QTY PKG#Aluminum 12 AWL-2700 Aluminum 48 AWL-2700-B
TRIANGLE DIGGER® ALUMINUM SUPPORT PLATESHole QTY PKG#7mm 48 AWT-3725 7mm 1000 AWT-3725-M 5/16” 48 AWT-3775 5/16” 1000 AWT-3775-M
DOUBLE DIGGER® ALUMINUM ANGLED SUPPORT PLATESHole QTY PKG#7mm 12 ADA-3725 7mm 48 ADA-3725-B 5/16” 12 ADA2-3775 5/16” 48 ADA2-3775-B
SINGLE ALUMINUM ANGLED DIGGER® SUPPORT PLATES5/16” aluminum angled support platesHole QTY PKG#5/16” 24 ANG-3775 5/16” 96 ANG-3775-B 5/16” 144 ANG-3775-C 5/16” 1000 ANG-3775-M7mm aluminum angled support platesHole QTY PKG#7mm 24 ANG-3725 7mm 96 ANG-3725-B 7mm 144 ANG-3725-C 7mm 1000 ANG-3725-M
If using T-nut sytle studs for drag racing with a 7mm Triangle Digger® Plate you will need to use a 1.000” stud length.
5
US Patent No. D547237
COMB DIGGER® ALUMINUM 5/16” SUPPORT PLATE/NUT For studs that are 1.325” and longer Two-ply Tracks Hole QTY PKG#5/16” 24 AWC-3775-24 5/16” 48 AWC-3775-485/16” 1000 AWC-3775-1000 Single-ply Tracks 5/16” 24 ARGC-3775-24 5/16” 48 ARGC-3775-485/16” 1000 ARGC-3775-1000
FAT MAX™ MOUNTAIN PADDLEHole Size - 0.275”Material SIZE QTY PKG# Titanium 2.5” x 2” 4 LSSP-2520-4 Titanium 2.5” x 2” 12 LSSP-2520-12 Titanium 2.5” x 2.25” 4 LSSP-2521-4Titanium 2.5” x 2.25” 12 LSSP-2521-12Titanium 3.5” x 2” 4 LSSP-3520-4Titanium 3.5” x 2” 12 LSSP-3520-12Titanium 3.5” x 2.25” 4 LSSP-3521-4Titanium 3.5” x 2.25” 12 LSSP-3521-12
Size Thread QTY PKG#3/4” 1/4”-20 48 ATD-7500 15/16” 1/4”-20 48 ATD-9380 15/16” 7mm 48 ATD-9387
T-NUTS
BIG NUT with nylon insert - Aluminum
Size Thread QTY PKG#.450” 5/16” 24 ALN2-4500 .450” 5/16” 96 ALN2-4500-B .450” 5/16” 1000 ALN2-4500-M For studs 1.175” to 1.450”Size Thread QTY PKG#.700” 5/16” 24 ALN2-7000 .700” 5/16” 96 ALN2-7000-B .700” 5/16” 1000 ALN2-7000-M For studs longer than1.450”
TRACK SAVER™ TOOL
3/4” *While supplies lastPKG#ATT-4260
Washers, Nuts & Accessories
For 7/8” Dished T-nutsPKG#ATT-3875
BIG NUT with NO nylon insert - Alum
Size Thread PKG#.450” 5/16” ALN-4500 For studs 1.175” to 1.450”
Size Thread PKG#.700” 5/16” ALN-7000 For studs longer than1.450”
For Race ONLY - sold by piece Better penetration, lighter weight
SPRING TOOLPKG# SizeSPR2-TOOL-S 10” SPR2-TOOL-L 15”
PKG#STUD-INSTALL STUD-INSERT2 (two hex pieces)
STUD HEX TOOL
TRIANGLE INDEXING TOOLFor both 5/16” and 7mm Woody’s Triangle Digger® Support Plates use:PKG#SPI-TOOL-T
INDEXING TOOLFor 5/16” Woody’s Square Digger® Support PlatesPKG# SPI-TOOL-5For 7mm Woody’s Square Digger® Support PlatesPKG# SPI-TOOL-7 For Woody’s Square Grand Digger® Support PlatesPKG# SPI-TOOL-G
LOCK NUTSSTEEL Thread QTY PKG#7mm 48 NYL-5000 7mm 1000 NYL-5000-M 1/4” 48 NYL-5010 1/4” 1000 NYL-5010-M 5/16” 48 NYL-5020 5/16” 1000 NYL-5020-M
SPEC GAUGEPKG#ASG-4100
SHIM WASHERS 48 shims/pkg
Material ID-OD-Thickness PKG#Alum. 1/4”-1/2”-.062” ASW-3950 Steel 7mm-1/2”-.062” ASW-4000
STEEL SHARPENING TOOLPKG# SizeTOOL-SHARP-3 30˚ TOOL-SHARP-4 45˚ TOOL-SHARP-6 60˚Replacement Inserts, pkg of 4PKG#TOOL-INSERT-4
T-NUT PULLERPKG# SizeATT-4290 1/4”-20 ATT-4280 7mm
TRACK TENSION TOOLMonitor your track tension, by determining your track deflection, with Woody’s Track Tension Tool. Use this tool as part of your regular maintenance schedule for optimum performance. Follow the deflection limit recommendations from the snowmobile manufacturer. Never guess again!PKG# TRAK-TOOL
WOODY’S® TRAILER DECAL9.125” x 23” (Orange Only)TEAM-TRAIL-10
CARBIDE GRINDING WHEEL(Not Shown)
1/2” x 6” Green wheelPKG# AGW-40001” x 6” Green wheelPKG# AGW-4100
HAND GRINDING WHEEL(Not Shown)
4 1/2” Black SiliconPKG# AGW-4500
7
SNOW FLAP STRAP KITPKG#MUD-STRAP
TRACK MARKERPKG#TRAK-MARK
Universal Track DrillPKG#DRIL-UNIV
TRACK DRILL
STAR WASHERID-THICKNESS QTY PKG#1/4”-.025” 48 HSW-4800 7mm-.025” 48 HSW-4900
WOODY’S® JUMBO TRAILER DECAL21.625” x 32.5” TEAM-TRAIL-B (Blue) TEAM-TRAIL-R (Red) TEAM-TRAIL-G (Green) TEAM-TRAIL-Y (Yellow)
Competition Runners
Year(s) 8” Competition
10” Competition
Year(s) 8” Competition
10” Competition
Year(s) 8” Competition
10” Competition
Model
All Arctic Cat (Composite) 1997-03 ----- CAI-6000
Model
All Composite Ski 1997-01 CPI-6208CPI-6200
CPI-6200-L
ARCTIC CAT Cross Country & Oval Race Bars
Arctic ZR (Composite) 2002-15 CAI-7008 CAI-7000
Model
YAMAHA Cross Country & Oval Race Bars
Year(s)Model 8” Competition
10” Competition
IFS Twin Track/Formula 500 ----- ----- CSD-5060All Flex Ski 1998-06 CSD-6808 CSD-6800
2002-15 ----- CYV-6580Yamaha Composite
Model
Flat Line Race
Year(s) Drag Competition
----- 3” of 115° USI-1070
10” of 60° USI-1060
USI SKI Runners
ModelC & A
Year(s)
-----
USI Project X -----
Year(s) CompetitionModel
Polaris (Comp) 8” & 6”
Ski-Doo (Flex) 8” & 6”
1998-15 WPI-1225
1998-06 WSD-8250
Outlaw 8” ---- OUT-4608C & A Pro Ski 10” ----- SCC-5000
SLP Powder Pro 10” ----- SLP-35-124
USI Project X Ski 10” ----- SCU-X301
Arctic (Comp) 8” & 6” 2002-15 WAT-9975
C & A Pro Ski 8” ----- SCC-5008
Yamaha (Comp)10”, 8” & 6” 2002-15 WYV-6580Arctic Cat C&A 10” 2005-15 SCC-5000
ModelPower Madd Ski
Year(s) 3” Carbide No Carbide
----- NPD3-1500 NPDR-1500
POWER MADD Runners
10” Carbide
AFTERMARKET Cross Country & Oval
CCC-5000
CCU-X301
Ski-Doo (Pilot) 8” & 6” 2007-15 WSD-9500
All Composite Ski 2002-04 CPI-6408 CPI-6400
6” Competition
-----
-----
ATTENTION! ADDITIONAL HOLES IN SKIS MAY BE REQUIRED(All comp bars built to order - Allow 3 days)
ModelNorthstar Ski
Year(s) 10” Competition----- NSC-6050
VINTAGE Runners
SlyDog Ski 10” ----- SCC-5000Curve XS Ski 10” ----- SCC-5000Curve XS Ski 8” & 6” ----- SCC-5008
ModelArctic Cat
Year(s)----- CAT-6000
6” Comp
Polaris ----- ----------Ski-Doo SXS-4000
4” Sno-X 120 Runners
CSD-6000
SXA-4000SXP-4000
C & A Mini Ski 10” ----- SCC-4500
C & A Mini Ski 8” ----- SCC-4508
6” Competition
-----
-----
6” Competition
-----
6” CompetitionCSD-5066
-----
Derby Ski ----- CPI-5200
Anderson Ski ----- CSD-5060
ACE™
Square 8”
AP8-1225
Pro Steer Ski 8” & 6” ----- WPI-1300 AP8-1300
SQS-5000AY8-6580AS8-8250AS8-9500
SQS-5000
SQS-5000SQS-5000AC8-5000
-----
-----
----------
AC8-5000
-----
AA8-9975
14” Competition
14” CompetitionCSD-5050CSD-6804
ACE™
Square 6”
AP6-1225AA6-9975
AY6-6580-----
AS6-8250AS6-9500
-----
C & A Pro Ski 6” ----- SCC-5006 AC6-5000
----------
---------------
C & A Mini Ski 6” ----- SCC-4506 ----- -----C & A Mini Ski 4” ----- SCC-4504 ----- -----
-----SLP Powder Pro 8” ----- SLP-35-128 ----- -----
SNO-X & X-COUNTRY BARS
---------------
AC6-5000AP6-1300
SKI-DOO Cross Country & Oval Race Bars
All Steel Ski ----- CPI-5200----- ----- -----CPI-6204
CPI-6204-L-----
POLARIS Cross Country & Oval Race Bars
Team Woody’s Racer, Joey Fjerstad
9
WEAR
The Grip-It™ Tire Screw is the shortest in the Twist™ line at 13mm / 0.512" long. Don’t let the small size fool you; it is made with the same high grade steel and carbide as Woody’s larger tire screws. The Grip-It adds traction to footwear, waders, short lug ATV/UTV and motorcycle tires, garden tractors, and bicycles. It can be used in any rubber sole or lug 0.472"+. The Grip-It is a high grade carbon steel, zinc plated hex screw with a carbide insert for durable, reliable traction. The thread is extra coarse to keep the screw secure. The Grip-It can be installed and removed using the Woody's Twist Installation Tool.
TWIST™ GRIP-IT™ CARBIDE SCREWSSize Qty PKG#13mm 25 WST-0413-25 13mm 100 WST-0413-100
GRIP-IT™ INSTALLATION TOOL (not shown)PKG#WST-TOOL-4
The “W” shaped Triangle Stand design makes it stable on uneven ground. It is constructed from high-quality carbon steel and zinc plated for rust and corrosion protection. Weighs 1.8 lbs. Made in the USA.
TRIANGLE MOTORCYCLE STAND
PKG#TRI-STAND
WOODY’S 14-15 “TROPHY” RACE JACKETOffered in sizes S - 2XSize PKG#Small Cl14-JKT-TROPHY-S Medium CL14-JKT-TROPHY-M Large CL14-JKT-TROPHY-L XLarge CL14-JKT-TROPHY-XL 2X CL14-JKT-TROPHY-2X
For the complete list of Woody’s Wear items, visit www.WoodysTraction.com.
Available for delivery in mid September
More handy products...
TECHNICAL ASSISTANCETech Line: (989) 689-4911 x450. We have experienced technicians to assist you during normal business hours. We also provide technical assistance through the Ask The Experts.
WARRANTY RETURNSCall our customer service department for a Return Authorization Number. (989) 689-4911 This Return Authorization Number must be visible on the outside of the box. The product must be inspected by a Woody’s technician to determine if the product is defective due to material, quality or workmanship before a final warranty determination is made. Proof of purchase is required. All returns to the manufacturer are for exchange only. Provide an email address, phone number and a return shipping address with the returned products.
DEALERSHIPDealers interested in carrying Woody’s® brand products, accessories or Woody’s Wear™, please find an official Woody’s® product distributor in your region or contact Larry Tiede at larry@wiem.com.
WOODY’S RACER PROGRAM If you are interested in becoming a sponsored racer, fill out the Woody’s Racer Sponsorship Application. Important Dates and Information for 2014-2015 • April 1, 2014 - Begin accepting applications for the 2014-15 summer and winter race season.• May 30, 2014 - First round of acceptance notifications will be emailed.• July 1, 2014 - Race Program participants can begin ordering product. • December 1, 2014 - Application process is closed. No longer accepting applications for the 14-15 season.• May 31, 2015 - Winter Race Program ends. Your discount code will be deactivated. • Racers place your orders through Woody’s Online Competition Store.
If you have questions call International Engineering & Manufacturing, Inc. and ask to speak with the Race Director or email your questions to mike@wiem.com.
LIMITED WARRANTY INTERNATIONAL ENGINEERING & MANUFACTURING, INC. (IEM) WARRANTS each product manufactured by it to be free from defects in material and workmanship under use for the purpose for which it is intended. The Company shall not be liable for damage or delays caused by defective materials or workmanship; is limited to the repair or replacement at its factory of defective article or part thereof, which may be returned to the factory, transportation charges prepaid, within one (1) year after delivery to the original purchaser. Proof of purchase is also required. The Company shall be the sole judge of the existence of any defect in the article so returned. No claims for charges incurred in the removal, disassembly or reinstallation of such article shall be allowed. Product manufactured for consumer use on snowmobiles is designed for snow or ice only, use on any other surface voids warranty. This Warranty shall not cover any article which has been misused or neglected or damaged by accident or any article which has been altered outside the Company’s factory. The Warranty for studs is void unless the studs are installed with Woody’s installation tools, support plates and lock nuts; according to the recommendations set forth in Woody’s Instructions and Template Patterns. This Warranty does not cover bending, chipping, flaking or carbide pin breakage or pin loss from stud wear, stud replacement labor or shipping. The Company shall, in no event be liable for consequential damage or contingent liability arising out of any total or partial failure to function of any article manufactured by it or of any equipment on or in which it is used. Failure of a user to give notice to claim as to defect claimed under the provisions of this Warranty within 1 year after delivery to original user, such claim shall constitute a waiver by consumer of all claims with respect to goods and equipment. The above warranty is in lieu of all other warranties, expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. In no event will the company be liable for consequential damages whether or not it has notice of the possibility of any such damages. Follow the Woody’s Manufacturer Warranty Returns directions to return any product from International Engineering & Mfg., Inc. Woody’s, Team Woody’s, Woody’s Wear, Traction Master, Snap-Off, Gold Digger, Chisel Tooth, Eliminator, Hooker, Mega-Bite, Twist, Grip-it, ACE, Fat Max, Square Digger, Round Digger, Double Digger, Triangle Digger, Angled Digger, Angled Double Digger, Combo Digger are trademarks and/or trade names of IEM. Traction Master refers to a patented product of IEM and is covered by US Patent No. 5,234,266 and Canadian Patent No. 2,086,186. Snap-Off studs are covered by US Patent No. 5,716,112 and Canadian Patent No. D84,609. Mega-Bite studs are covered by US Patent No. D415,954 and Canada No. D88,613. Wide Body Chisel Tooth studs are covered by US Patent No. D551,544 and Canadian No. 115,499. Angled Digger support plates are covered by US Patent No. 6,609,772B2. Triangle Digger support plates are covered by US Patent No. D547237.
Company Information
Recommended