View
214
Download
0
Category
Preview:
Citation preview
8/22/2019 COUNTERS-Guia de Contadores OMRON
1/10
T-i
Counters
ContentsSelection guide T-ii
H7CX Digital multi-function counter,1/16 DIN T-1
H7EC Count totalizer, 1/32 DIN T-4
H7ET Time totalizer, 1/32 DIN T-5
H7ER Tachometer, 1/32 DIN T-6
H7BX Digital multi-functioncounter with large display,
72 x 72 mm T-7
H7CN Single preset counter with
4-digit LED display, 1/16 DIN T-7
H8GN 1/32 DIN counter/timercombination with serialcommunications T-8
8/22/2019 COUNTERS-Guia de Contadores OMRON
2/10
Counters
Selection Guide
T-ii Indicates models available for fast delivery.
Presetcounting
1/16 DIN, 4- or 6-digit multi-color backlit LCD displays H7CX
Single and dualpresets
72 x 72 mm, bright red/greenbacklit LCD display H7BX
1/16 DIN, 4-digit red LEDdisplay H7CN
Single preset
1/32 DIN, 4-digit bi-color LCD,24 VDC, communication type
availableH8GN
Totalizing
1/16 DIN, 4- or 6-digit multi-color backlit LCD displays H7CX
Count1/32 DIN, self-powered or
backlit 8-digit LCD H7EC
1/32 DIN, 4-digit bi-color LCD,24 VDC, communication type
availableH8GN
Time1/32 DIN, self-powered or
backlit 7-digit LCD H7ET
1/32 DIN, self-powered 4- and5-digit LCD displays H7ER
Tachometer (RPM)
1/16 DIN, 4- or 6-digit multi-color backlit LCD displays H7CX-AW
Batchcounter
Count in dozens,hundreds or other
user-set units
72 x 72 mm, bright red/greenbacklit LCD display H7BX
1/16 DIN, 4- or 6-digit multi-color backlit LCD displays H7CX-AW
Timing, counting,and totalizing
functions in onepackage
4-digit preset counter 4-digit timer,6 functions:ON delay, repeatcycle, signal OFFdelay interval, cumu-lative and duty cycleadjustable repeat
8-digit totalizer
1/32 DIN, 4/8 digit, 3-colorbacklit display H8GN
8/22/2019 COUNTERS-Guia de Contadores OMRON
3/10For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca T-1
H7CX Multi-Function Digital Counters
Advanced 1/16 DIN Size Preset Counters
High-speed response up to 5 KHz Fully scalable
Large, reverse-lit LCD display for long distance legibility
Programmable display color (from green to red or red to
green) helps operators identify status changes quickly
Protect settings with 5 levels of key access
Built-in sensor power supply available
Accepts voltage and non-voltage inputs, PNP/NPN
selectable
Wide range of input modes: Increment, decrement,
command, individual and quadrature
NEMA 4/IP66 front panel
Panel mounting adapter and waterproof packing provided
with screw terminal connection types
Specifications Supply voltage: 100-240 VAC, 50/60 Hz, 12 to 24 VDC, 12
to 24 VDC/24 VAC (-A11 models)
12 VDC, 100 mA for inputs
Counting functions: 1-stage counter, 1-stage counter with
totalizer (-A and A11 models)
1-stage counter, 2-stage counter, 1-stage counter with
totalizer, 1-stage counter with batch counter, dual counter,
tachometer (-AW models)
Counting ranges: -999 to 9,999 (4-digit); -99,999 to 999,999
(6-digit)
Control output: SPDT contact output rating 5 A @ 250 VAC
Output functions: One-shot and sustained outputs with 8, 11
or 12 user selections
Multi-Function Digital Counters
H7CX T422
Preset Digital Counters
Appearance/Dimensions
L x W x H mm
Counting action Displaydigits
Sensor powersupply
Supply voltage Connectiontype
Model
48 x 48 x 78.5
1-stage counter,1-stage counter with totalizer
6 12 VDC 100 to 240 VAC,50/60 Hz
11-pin socket H7CX-A11-AC100240
24 VAC/12 to 24VDC
H7CX-A11D1-DC1224AC24
48 x 48 x 106
4 100 to 240 VAC,50/60 Hz
Screw terminal H7CX-A4-AC100240
48 x 48 x 70
Not provided 12 to 24 VDC H7CX-A4D-DC1224
8/22/2019 COUNTERS-Guia de Contadores OMRON
4/10T-2 Indicates models available for fast delivery.
H7CX Multi-Function Digital Counters
48 x 48 x 106
1-stage counter,1-stage counter with totalizer
6 12 VDC 100 to 240 VAC,50/60 Hz
Screw terminal H7CX-A-AC100240
48 x 48 x 70
Not provided 12 to 24 VDC H7CX-AD-DC1224
48 x 48 x 106
1-stage counter,2-stage counter,1-stage counter withtotalizer,1-stage counter with batch
counter,dual counter,tachometer
12 VDC 100 to 240 VAC,50/60 Hz
H7CX-AW-AC100240
48 x 48 x 106
24 VAC/12 to 24VDC
H7CX-AWD1-DC1224AC24
Accessories
Description Appearance DimensionsH x W x D mm
Specification Model
Panel mounting adapter 58 x 48 Order separately for H7CX-A11and H7CX-L8 models
Y92F-30
Waterproof packing Y92S-29
Track mounting/frontconnecting socket
74 x 50 x 31.2 11-pin socket with built-in holddown latches
P2CF-11
74 x 50 x 31.2 11-pin, finger-safe socket withbuilt-in hold down latches
P2CF-11-E
Back connecting socketfor panel mounting
45 x 45 x 27 11-pin round socket P3GA-11
48 x 48 x 37.5 installed 11-pin socket with finger-safeterminal cover
P3GA-11 with Y92A-48G
Preset Digital Counters (Continued)
Appearance/Dimensions
L x W x H mm
Counting action Displaydigits
Sensor powersupply
Supply voltage Connectiontype
Model
8/22/2019 COUNTERS-Guia de Contadores OMRON
5/10For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca T-3
H7CX Multi-Function Digital Counters
Hard cover 50.5 x 50.5 x 16 Protects front panel from dirt andwater
Y92A-48
Soft cover 50.5 x 50.5 Protects front panel against oilpenetration from operatorshands, to IP54P
Y92A-48F1
Mounting track 500 L x 35 H x 7.3 D 0.5 m length PFP-50N
1000 L x 35 H x 7.3 D 1 m length PFP-100N
1000 L x 35 H x 16.0 D 1 m length PFP-100N2
End plate 50 x 10 x 10 Holds track-mounted devices inplace
PFP-M
Accessories (Continued)
Description Appearance DimensionsH x W x D mm
Specification Model
8/22/2019 COUNTERS-Guia de Contadores OMRON
6/10T-4 Indicates models available for fast delivery.
H7EC Self-Powered Totalizers
Subminiature Count Totalizer
Large 8-digit display with 8.6 mm height Backlit LCD display available for improved visibility
PNP/NPN DC voltage input available
Key-protect switch to prevent front face resetting
Offers both 1 kHz input for high speed no chatter input
signals or 30/20 Hz inputs for relay and switch (high chatter)
inputs
Up counting
NEMA 4/IP66 front face
Black case matches panel aesthetics
Battery powered (user replaceable)
Specifications Supply voltage: Backlight models require 24 VDC Inputs: AC/DC voltage: 24 to 240 VAC/VDC, 50/60 Hz; 6 to 240 VDC at
High logic level, 0 to 2.4 VAC, 50/60 Hz or 0 to 2 VDC at Low logic level, No-voltage: Short-circuit impedance 10 k max.
Reset time: 20 ms reset signal
Self-Powered Totalizer
Accessories
Self-Powered Totalizers
H7EC T423
Appearance/Dimensions
H x W x D mm
Countingaction/speed
Displaydigits
Sensorpowersupply
Supply voltage Input type Connectiontype
Model
Count totalizer/30 Hz or 1 kHz
8 No Battery PNP/NPN universal DCvoltage input
Screwterminal
H7EC-NV-B
Backlight24 VDC
H7EC-NV-BH
Battery H7EC-NV-B
Count totalizer/20 Hz
AC/DC multi-voltageinput
H7EC-NFV-B
Count totalizer/30 Hz or 1 kHz
No-voltage H7EC-N-B
Description Appearance DimensionsH x W x D mm
Specification Model
Replaceable battery 24.5 dia. x 7.7 H Battery replacement Y92S-36
Panel adapter 26 x 45 x 4 Flush mounting adapter Y92F-75
24.8 x 48.8 x 4 Y92F-77B
8/22/2019 COUNTERS-Guia de Contadores OMRON
7/10For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca T-5
H7ET Self-Powered Time Counter
Subminiature Counters Display
Accumulated Time in Use Displays cumulative time counting the output signals from a
sensor; input applied enables the timing circuit to start;
disabling the inputs stops the timing sequence
Large seven-digit display with 8.6 mm height
Key-protect switch prevents front resetting
Available with backlit LCD
Selectable time range: 999999.9h or 3999d 23.9h and 999h
59m 59s or 9999h 59.9m
NEMA 4/IP66 front face
Black case for sleek aesthetics
Battery powered (user replaceable)
Specifications Supply voltage: Backlight models require 24 VDC Inputs: AC/DC voltage: 24 to 240 VAC/VDC, 50/60 Hz; 6 to 240 VDC at
High logic level, 0 to 1.5 VAC, 50/60 Hz or 0 to 2 VDC at Low logic level, DC voltage input, 4.5 to 30 VDC at High logic level;
0 to 2 VDC at Low logic level, No-voltage: Short-circuit impedance 10 k max. Reset time: 20 ms reset signal
Self-Powered Time Totalizer
Accessories
Self-Powered Time Counter
H7ET T424
Appearance/Dimensions
H x W x D mm
Counting action/Time range
Displaydigits
Sensorpowersupply
Supplyvoltage
Inputtype
Connectiontype
Model
Time Counter/ 999999.9h or3999d23.9h (selectable)
7 No Battery PNP/NPN universalDC voltage input
Screwterminal
H7ET-NV-B
Backlight
24 VDC
H7ET-NV-BH
Time Counter/ 999h59m59s or9999h59.9m (selectable)
Battery H7ET-NV1-B
Backlight24 VDC
H7ET-NV1-BH
Time Counter/ 999999.9h or3999d23.9h (selectable)
Battery AC/DC multi-voltageinput
H7ET-NFV-B
No-voltage input H7ET-N-B
Time Counter/ 999h59m59s or9999h59.9m (selectable)
AC/DC multi-voltageinput
H7ET-NFV1-B
No-voltage input H7ET-N1-B
Description Dimensions
H x W x D mm
Specification Model
Replaceable battery 24.5 dia. x 7.7 H Battery replacement Y92S-36
Panel adapter 26 x 45 x 4 Flush mounting adapter Y92F-75
24.8 x 48.8 x 4 Y92F-77B
8/22/2019 COUNTERS-Guia de Contadores OMRON
8/10T-6 Indicates models available for fast delivery.
H7ER Self-Powered Tachometer
Subminiature Tachometers
Large display with 8.6 mm height PNP/NPN DC voltage input available
Selectable dual revolution display on 5-digit models extends
up to 10,000 rpm
Revolution is displayed according to encoder resolution
used:
4-digit: 1000 rps or s-1 (1 pulse/rev.), 1000 rpm or m-1
(60 pulse/rev.)
5-digit: 1000.0 rps or s-1 (10 pulse/rev.), 1000.0 rpm or m -1
(600 pulse/rev.) 10,000 rpm or m -1 (60 pulse/rev.),
switchable
NEMA 4/IP66 front face
Battery powered (user replaceable)
Specifications Supply voltage: Backlight models require 24 VDC
Inputs:
PNP or NPN universal DC voltage input, 4.5 to 30 VDC at "High" logic level; 0 to 2 VDC at "Low" logic level
No-voltage: Short-circuit impedance 10 k max.
Minimum signal width: 1 kHz: 0.5 ms; 10 kHz: 0.05 ms
Self-Powered Tachometers
Accessories
Self-Powered Tachometer
H7ER T425
Appearance/Dimensions
H x W x D mm
Countingaction/speed
Displaydigits
Encoderresolution
Supply voltage Input type Connectiontype
Model
Tachometer/1 kHz
4 1000 rps
or s-1
(1 pulse/rev.),1000 rpm
or m-1
(60 pulse/rev.)
Backlight 24 VDC PNP/NPNuniversal DCvoltage input
Screwterminal
H7ER-NV-BH
Battery H7ER-NV-B
No-voltage input H7ER-N-B
Tachometer/10 kHz
5 1000.0 rps
or s-1
(10 pulse/rev.),1000.0 rpm
or m-1 (600pulse/rev.
10,000 rpmor m-1 (60pulse/rev.),switchable
Backlight 24 VDC PNP/NPNuniversal DCvoltage input
H7ER-NV1-BH
Battery PNP/NPNuniversal DCvoltage input
H7ER-NV1-B
Description DimensionsH x W x D mm
Specification Model
Replaceable battery 24.5 dia. x 7.7 H Battery replacement Y92S-36
Panel adapter 26 x 45 x 4 Flush mounting adapter Y92F-75
24.8 x 48.8 x 4 Y92F-77B
8/22/2019 COUNTERS-Guia de Contadores OMRON
9/10For complete specifications and additional models: U.S. www.omron247.com Canada www.omron.ca T-7
H7BX Digital Counters
72 x 72 mm Multi-Function Counter with a
Bright, Easy-to-view, NegativeTransmissive LCD
Provides a total and preset counter, batch counter, dual
counter, and tachometer
Large highly visible display with backlit transmissive LCD
Selectable display color (red/green) enables checking output
status at a distance
Easy operation with a key for each digit
Perform all basic settings with a DIP switch
Wide range of inputs accepted for NPN/PNP inputs
(multi-inputs) and 2-wire DC sensors
Degree of protection: IP54 equivalent (front section only)
Specifications Supply voltage: 100 to 240 VAC, 24 VAC/12 to 24 VDC
Inputs: voltage or no-voltage inputs; 12 VDC external power
supply
Counting functions: 1-stage preset counter, 2-stage preset
counter, total and preset counter, batch counter, dual
counter, tachometer
Ranges: counting -99,999 to 999,999 (6-digit);
tachometer 0 to 999,999 (6 digits)
Control output: contact output: 3 A at 250 VDC/30 VDC
(resistive load); transistor output: 100 mA max. at
30 VDC max.
Output functions: One-shot and sustained outputs with up to
12 user selections
Reset time: 1 ms or 20 ms selectable
1/16 DIN, Single Preset Counter with Four-Digit LED Display
Simple to set and operate
Easy-to-read 8 mm-high LED display
Contact (SPST-NO or SPDT) or solid-state (open-collector)
outputs
Single counting speed per model: 30 cps models stocked;
5 kcps available
Separate UP, DOWN and REVERSIBLE counting models Memory protection circuit available on AC models
8-pin or 11-pin round socket models available
Panel-mount adapter, sockets and accessories available
separately
UL, CSA approved
Specifications Supply voltage: 100-240 VAC, 50/60 Hz
Counting functions: 1-stage (single preset) UP counter
Counting ranges: 0 to 9,999 (4-digit)
Control output: Contact and transistor options
Output functions: Sustained output until reset
Digital Counters
H7BX T427
Digital Counters
H7CN T428
8/22/2019 COUNTERS-Guia de Contadores OMRON
10/10T 8 Indicates models available for fast delivery
H8GN Digital Counters
Timing, Counting, and Totalizing
Functions in One 1/32 DIN Size Package Choose between 4-digit preset counter and 4-digit timer
operation
Preset counter can be programmed to display the monitoring
total count value (8-digit totalizer)
Built-in prescaling for counter operation
ON/OFF-duty adjustable repeat-cycle mode that can be
used to perform cyclic control is available for timer operation
Four preset values programmable via the front panel key
(SV-bank)
Available with RS-485 communications
Inputs: no voltage
Degree of protection: NEMA 4X/IP66 front panel
Specifications Supply voltage: 24 VDC
Inputs: No-voltage inputs
Counting functions: Increment, decrement, individual,
quadrature inputs, totalizing
Timing functions: Signal ON-delay, repeat cycle, signal
OFF-delay, interval, cumulative, ON/OFF-duty adjustable
repeat cycle
Ranges: Counting -999 to 9,999; Time ranges 0.000 to
9.999 s, 0.00 to 99.99 s, 0.0 to 999.9 s, 0 to 9999 s, 0 min
00 s to 99 min 59 s, 0.0 to 999.9 min, 0 h 00 min to 99 h
59 min, 0.0 h to 999.9 h, 0 h to 9999 h Control output: SPDT contact output: 3 A at 250 VAC/
30 VDC (resistive load)
Output functions: One-shot, sustained output, and overrun
display
Reset time: 1 ms or 20 ms selectable
Digital Counters
H8GN T429
Recommended