View
5
Download
0
Category
Preview:
Citation preview
+31 (0)888-POWERS (769 377)120
Copyright © 2010 Powers Fasteners Europe. All rights reserved.
DM-PRO drop-in anchor – zinc plated
DM-PRO inslaganker – verzinkt
DM-PRO Schlaganker – verzinkt
DM-PRO cheville de frappe – zinguée
DM-PRO slagankare – elförzinkad Type | Art. Nr. | L [mm] M d0 [mm]
DM-PRO M6 24600 100 1600 25 M6 8DM-PRO M8 24602 100 800 30 M8 10DM-PRO M10 24604 100 800 40 M10 12DM-PRO M12 24606 100 400 50 M12 16DM-PRO M16 24608 25 100 65 M16 20DM M20 24610 25 100 80 M20 25
DM-ST-SG drop-in anchor setting tool with safety grip
DM-ST-SG inslaganker installatiegereedschap met veiligheidsgrip
DM-ST-SG Schlaganker Setzwerkzeug mit Handschlagschutz
DM-ST-SG outil de pose pour cheville de frappe avec poignée ergonomique
DM-ST-SG inslagsverktyg till slagankare för ett säkrare montageType | Art. Nr. |
DM-ST-SG M6 06330 1DM-ST-SG M8 06332 1DM-ST-SG M10 06334 1DM-ST-SG M12 06336 1DM-ST-SG M16 06338 1DM-ST-SG M20 06340 1
DMST drop-in anchor setting tools
DMST inslaganker installatiegereedschap
DMST Schlaganker Setzwerkzeug
DMST outil de pose pour cheville de frappe
DMST inslagsverktyg till slagankare Type | Art. Nr. |
DM6ST 06315 1 20DM8ST 06307 1 20DM10ST 06309 1 20DM12ST 06310 1 20DM16ST 06311 1 20DM20ST 06313 1 20
F 120
Feuerwider-standsklasse
POWERS
TEST LABORATO
RY
EUROPEAN TECHNICAL APPROVALETA-10/0144 - ETAG 001 - option 7
10
0679-CPD-0484
EUROPEAN TECHNICAL APPROVALETA-10/0145 - ETAG 001 - part 6
10
0679-CPD-0485
M8-M16
M6-M12
NEW
www.powerseurope.nl 121
L=hnom
Mdo
h1
e
Nrec
Vrec
1 kN ≈ 100kg
contact
Allowable loads, uncracked concreteToegestane belasting, ongescheurd betonZulässige Lasten, ungerissener BetonCharge admissible, béton non fissuréTillåtna laster, osprucken betongType hnom [mm] df [mm] h1 [mm] e [mm] Nall [kN] Vall [kN]
DM-PRO M8 30 9 32 13 3,9 3,3DM-PRO M10 40 12 42 17 3,6 4,2DM-PRO M12 50 14 53 22 4,1 10,3DM-PRO M16 65 18 68 30 4,1 13,5
Allowable loads, cracked concreteToegestane belasting, gescheurd betonZulässige Lasten, gerissener BetonCharge admissible, béton fissuréTillåtna laster, sprucken betongType hnom [mm] df [mm] h1 [mm] e [mm] Nall [kN] Vall [kN]
DM-PRO M6 25 7 26 11 0,6 0,6DM-PRO M8 30 9 32 13 0,6 0,6DM-PRO M10 40 12 42 17 1,4 1,4DM-PRO M12 50 14 53 22 1,7 1,7
Recommended loads, uncracked concreteAanbevolen belasting, ongescheurd betonEmpfohlene Lasten, ungerissener BetonCharge recommandée, béton non fissuréRekommenderade laster, osprucken betongType hnom [mm] df [mm] h1 [mm] e [mm] Nrec [kN] Vrec [kN]
DM M20 80 22 85 32 10,2 17,8
Mechanical anchorsStalen ankers en pluggen
Stahlanker und DübelAncrages mécaniques
Mekaniska infästningar
C20/25
EUROPEAN TECHNICAL APPROVALETA-10/0144 - ETAG 001 - option 7
10
0679-CPD-0484
C20/25
C20/25EUROPEAN TECHNICAL APPROVALETA-10/0145 - ETAG 001 - part 6
10
0679-CPD-0485
max. M8
Recommended