View
224
Download
0
Category
Preview:
Citation preview
8/8/2019 Himpunan Motivasi
1/232
Tazkirah
Fakulti Kejuruteraan Mekanikal
12 April 2006(13 Rabiul Awal 1427)
8/8/2019 Himpunan Motivasi
2/232
Sifat- sifat Rasulullah.
Panduan/c ontoh kita semua seb aga i warga FKM
da lam usaha memartab atkan FKM sebaga iorganisasi yang pa ling c emerlang,gemilang danterb ilang d i KUKTEM.
8/8/2019 Himpunan Motivasi
3/232
Baginda Rasulullah merupakan c ontoh terba ikuntuk d iteladani kerana Bag inda memiliki
keperibad ian dan akhlak yang sangat mulia,sebaga ima na d ijelaskan oleh da lam Surah Al-Ahzab ayat 21 tafsirnya :"Demi sesungguhnya adalah bagi kamu pada diriRasulullah itu contoh ikutan yang baik".dan da lam Surah Al-Qa lam ayat 4 ta fsirnya :
"Dan bahawa sesungguhnya engkau mempunyaiakhlak yang sangat-sanga t mulia".
8/8/2019 Himpunan Motivasi
4/232
Keperibad ian tingg i serta akhlak muliaBaginda Rasulullah Sa lla llahu AlaihiWasa llam merupakan hasil d id ikan danpenga ja ran dari Al-Quran. Sayida tina Aisyahpernah berka ta maksudnya :
"Sesungguhnya akhlak Nabi Salla llahu Alaihi
Wasallam itu adalah Al-Quran".(Hadis
riwayat Imam Muslim)
8/8/2019 Himpunan Motivasi
5/232
Al-Quran mend id ik Bag inda supaya bersifa t mulia ,
pemaaf, sabar, ad il, amanah, suka menga jakorang ke ja lan keba ikan, mela rang melakukansega la mac am kemungkaran dan seb aga inya .
8/8/2019 Himpunan Motivasi
6/232
Akhlak mulia sangat dituntut dalam Islam kerana ituBaginda turut mend id ik umatnya supaya berakhlak
mulia . Baginda menunjuk a ja r d an memberikanbimbingan akhlak bukan hanya setakat teori atauc a ka p sa ha ja , teta pi Ba gind a send irimelakukannya. Itulah cara pendidikan terbaik danmendatangkan kesan menda lam. Ama lan itulahyang menarik perhatian dan menjad i kep erc ayaanorang rama i, seka ligus menc ontohi akhlak Baginda
Sa lla llahu Ala ihi Wasa llam.
8/8/2019 Himpunan Motivasi
7/232
kunci utama ke arah pembentukan akhlak yang
mulia itu sebaga imana yang d imiliki o leh Rasulullahada lah lahir daripada memp raktikkan sifa t yangwajib bagi Rasul-rasul ia itu :
Pertama : Sidd iq yang bermaksud benar da lamsemua perka taan dan perbuatannya.
Ked ua : Ama nah yang bermaksud jujur dan
dipercayai.
Ketiga : Tab ligh ia itu menyebarkan danmenerangkan apa jua wahyu yangd iterimanya dari Allah.
Keempat : Fa tanah ia itu cerd ik, b ijaksana, panda idan c erdas
8/8/2019 Himpunan Motivasi
8/232
Kesimpulan:
Sebagai warga institusi akademik,kita
juga perlu;1. benar
2. amanah3. menyampaikan/menyebarkan
4. bidai
8/8/2019 Himpunan Motivasi
9/232
Sumber;
1. khutbah jumaat di Brunei Darulsalam2. www.dudung.net (Indonesia)
http://www.dudung.net/http://www.dudung.net/8/8/2019 Himpunan Motivasi
10/232
The 7 Habits of HighlyThe 7 Habits of HighlyEffective PeopleEffective People
Powerful Lessons in PersonalPowerful Lessons in PersonalChangeChange by Stephen R. Coveyby Stephen R. Covey
8/8/2019 Himpunan Motivasi
11/232
1. Be Proactive1. Be Proactive
Being "proactive" means taking responsibility forBeing "proactive" means taking responsibility for
everything in life, rather than blaming othereverything in life, rather than blaming other
people and circumstances for obstacles orpeople and circumstances for obstacles orproblems. Initiative, and taking action will thenproblems. Initiative, and taking action will then
follow. If you want something to happen, figurefollow. If you want something to happen, figure
out how, then make it happen.out how, then make it happen.
8/8/2019 Himpunan Motivasi
12/232
2. Begin with the End2. Begin with the Endin Mindin Mind
Formulate a "personal mission statement". KnowFormulate a "personal mission statement". Know
where you are going so each step of the way leadswhere you are going so each step of the way leads
you down the correct path. Every day is evaluatedyou down the correct path. Every day is evaluatedin the sense, is what I'm doing contributing to thein the sense, is what I'm doing contributing to the
vision I have for my future?vision I have for my future?
8/8/2019 Himpunan Motivasi
13/232
3. Put First Things First3. Put First Things First
"Organize and execute around"Organize and execute around
prioritiespriorities. Proper time management. Proper time managementis key to achieving successis key to achieving success
8/8/2019 Himpunan Motivasi
14/232
4. Think Win/Win4. Think Win/Win
The best way to get what you want is toThe best way to get what you want is to
help others get what they want, alwayshelp others get what they want, always
create a win/win situation for both of youcreate a win/win situation for both of you
8/8/2019 Himpunan Motivasi
15/232
5. Seek First to Understand,5. Seek First to Understand,Then to be UnderstoodThen to be Understood
Make a diagnosis prior to offering a prescription.Make a diagnosis prior to offering a prescription.
One must understand what they are talking aboutOne must understand what they are talking about
to make an intelligent decision. Always hear whatto make an intelligent decision. Always hear whatothers are saying, do not jump to your ownothers are saying, do not jump to your own
conclusions.conclusions.
8/8/2019 Himpunan Motivasi
16/232
6. Synergize6. Synergize
Working in teams. The whole is greater than theWorking in teams. The whole is greater than the
sum of its parts. In a group of people usesum of its parts. In a group of people use
everyone's strengths to form a strong team.everyone's strengths to form a strong team.Effective people must get all involved toEffective people must get all involved to
maximized the output of an organizationmaximized the output of an organization
8/8/2019 Himpunan Motivasi
17/232
7. Sharpen the saw7. Sharpen the saw
Amplify your greatest asset. Everyday youAmplify your greatest asset. Everyday you
must work to improve yourself physically,must work to improve yourself physically,
emotionally, mentally, and socially throughemotionally, mentally, and socially throughstudy, exercise, training, and experience.study, exercise, training, and experience.
8/8/2019 Himpunan Motivasi
18/232
Thank YouThank You
Any other good habit to share???Any other good habit to share???
8/8/2019 Himpunan Motivasi
19/232
Microsoft PowerPoint Slide ShowMicrosoft PowerPoint Slide ShowMicrosoft PowerPoint Slide ShowMicrosoft PowerPoint Slide Show
Berbaik
Sangka
BerbaikBerbaikBerbaik
SangkaSangkaSangka
8/8/2019 Himpunan Motivasi
20/232
8/8/2019 Himpunan Motivasi
21/232
Manusia hari ini sukabersangka-sangka
Ada sangkaan baik...
Ada sangkaan buruk
ManusiaManusiaManusiahariharihari iniiniinisukasukasukabersangkabersangkabersangka---sangkasangkasangka
AdaAdaAdasangkaansangkaansangkaanbaikbaik......
AdaAdaAdasangkaansangkaansangkaanburukburuk
8/8/2019 Himpunan Motivasi
22/232
Orang beribadah
disangka riakOrang yang relax
disangka malas
Orang yang pakai baju barudisangka menunjuk
OrangOrangOrangberibadahberibadah
disangkadisangkadisangkariakriakOrangOrangOrangyangyangyangrelaxrelax
disangkadisangkadisangkamalasmalas
OrangOrangOrangyangyangyangpakaipakaibajubajubarubarudisangkadisangkadisangkamenunjukmenunjuk
8/8/2019 Himpunan Motivasi
23/232
Orang yang pakai baju buruk
disangka zuhud (hina)Orang makan banyak
disangka pelahap
Orang makan sikitdisangka kedekut
OrangOrangOrangyangyangyangpakaipakaibajubajuburukburuk
disangkadisangkadisangkazuhudzuhud((hinahina))OrangOrangOrangmakanmakanbanyakbanyak
disangkadisangkadisangkapelahappelahap
OrangOrangOrang
makanmakan
sikitsikit
disangkadisangkadisangkakedekutkedekut
8/8/2019 Himpunan Motivasi
24/232
Orang baik
disangka burukOrang buruk
disangka baik
Orang senyumdisangka mengejek
OrangOrangOrangbaikbaik
disangkadisangkadisangkaburukburukOrangOrangOrangburukburuk
disangkadisangkadisangkabaikbaik
OrangOrangOrangsenyumsenyumdisangkadisangkadisangkamengejekmengejek
8/8/2019 Himpunan Motivasi
25/232
Orang masam
disangka merajukOrang bermuzakarah
disangka mengumpat
Orang diamdisangka sombong
OrangOrangOrangmasammasam
disangkadisangkadisangkamerajukmerajukOrangOrangOrangbermuzakarahbermuzakarah
disangkadisangkadisangkamengumpatmengumpat
OrangOrangOrangdiamdiamdisangkadisangkadisangkasombongsombong
8/8/2019 Himpunan Motivasi
26/232
Orang menawandisangka pakai susuk
Orang nampak ceria
disangka membela
OrangOrangOrangmenawanmenawandisangkadisangkadisangkapakaipakaisusuksusuk
OrangOrangOrangnampaknampakceriaceria
disangkadisangkadisangkamembelamembela
8/8/2019 Himpunan Motivasi
27/232
mana tahuyang diam itu
kerana
berzikir kepada Allah
manamanamanatahutahutahuyangyangyangdiamdiam ituituitu
keranakeranakerana
berzikirberzikirkepadakepadaAllahAllah
8/8/2019 Himpunan Motivasi
28/232
mana tahuyang senyum itu
kerana
bersedekah
manamanamanatahutahutahuyangyangyangsenyumsenyum ituituitu
keranakeranakerana
bersedekahbersedekah
8/8/2019 Himpunan Motivasi
29/232
mana tahuyang masam itu
kerana
mengenangkan dosa
manamanamanatahutahutahuyangyangyangmasammasam ituituitu
keranakeranakerana
mengenangkanmengenangkandosadosa
8/8/2019 Himpunan Motivasi
30/232
mana tahuyang menawan itu
kerana
bersih hati dan mindanya
manamanamanatahutahutahuyangyangyangmenawanmenawan ituituitu
keranakeranakerana
bersihbersihhatihatidandanmindanyamindanya
8/8/2019 Himpunan Motivasi
31/232
mana tahuyang ceria itu
kerana
cergas cerdasnya
manamanamanatahutahutahuyangyangyangceriaceria ituituitu
keranakeranakerana
cergascergascerdasnyacerdasnya
8/8/2019 Himpunan Motivasi
32/232
Jauhi sikap suka
bersangka-sangkakerana ia bakal
memusnahkan ukhwah
seperti musnah nyakayu dimakan api
JauhiJauhiJauhisikapsikapsikapsukasukasuka
bersangkabersangkabersangka---sangkasangkasangkakeranakeranakerana iaiaiabakalbakalbakal
memusnahkanmemusnahkan ukhwahukhwah
sepertisepertisepertimusnahmusnahmusnahnyanyanyakayukayudimakandimakanapiapi
8/8/2019 Himpunan Motivasi
33/232
Satu benda yang kita lihat,
macam-macam kesimpulanyang boleh kita buat.
Semuanya bergantung
bagaimana kitamelihatnya.
SatuSatuSatubendabendabendayangyangyangkitakitakita lihatlihatlihat,,,
macammacam--macammacamkesimpulankesimpulanyangyangyangbolehbolehbolehkitakitakita buatbuatbuat...
SemuanyaSemuanyaSemuanyabergantungbergantungbergantung
bagaimanabagaimanakitakitamelihatnyamelihatnya..
8/8/2019 Himpunan Motivasi
34/232
Tegakkan Islam dalam
diri kamu.. nescaya Islamakan tertegak diatas bumi
kamu
Imam Al-Syahid HassanAl- Banna.
Tegakkan Islam dalamTegakkan Islam dalamTegakkan Islam dalam
diri kamu.. nescaya Islamdiri kamu.. nescaya Islamdiri kamu.. nescaya Islamakan tertegak diatas bumiakan tertegak diatas bumiakan tertegak diatas bumi
kamukamukamu
Imam AlImam Al--Syahid HassanSyahid HassanAlAl--Banna.Banna.
8/8/2019 Himpunan Motivasi
35/232
Just Be Yourself...and
Always Trust to
Allah...
Just Be Yourself...Just Be Yourself...Just Be Yourself...andandand
Always Trust toAlways Trust toAlways Trust to
Allah...Allah...Allah...
8/8/2019 Himpunan Motivasi
36/232
8/8/2019 Himpunan Motivasi
37/232
Tazkirah FakultiTazkirahTazkirah FakultiFakultiMahadzirMahadzir IshakIshak
ITQAN
KONSEP ITQAN
8/8/2019 Himpunan Motivasi
38/232
KONSEP ITQAN
Dari maksud hadis; melakukansesuatu perkara dengan baik dan
sempurna ataupun cemerlang Sesungguhny Allah menyukai apabila
seseorang kamu mengerjakan sesuatupekerjaan supaya dilakukan pekerjaanitu dengan baik dan sempurna..
maksud hadith riwayat al-baihaqi
Organisasi ITQAN
8/8/2019 Himpunan Motivasi
39/232
Organisasi ITQAN
Dlm pembangunan diri danorganisasi dipecahkan kepadalima(5) dimensi utamakecemerlangan iaitu cemerlang;
1) ANDA DAN PENCIPTA
2) ANDA DAN DIRI
3) ANDA DAN ORNG LAIN 4) ANDA & TANGGUNGJAWAB
5) ANDA & NILAI SEJAGAT
Anda & Pencipta
8/8/2019 Himpunan Motivasi
40/232
Anda & Pencipta
Pencipta sebagai sumber inspirasi & motivasi
- Manusia dan keperluannya kepada pencipta
- Persoalan asas manusia- Memahami tujuan hidup sebenar
Dimensi Manusia dan penciptanya- Iman
- Ilmu
- Amal
M si d k l
8/8/2019 Himpunan Motivasi
41/232
Manusia dan keperluannya
kepada pencipta
Adakah Allah bergantung kepadaamalan dan ibadah kita?
Adakah kita bergantung harap kepadakasih dan pertolonganNya?
Adakah kita sentiasa bersyukur
kepada anugerahnya?
Persoalan asas manusia dan
8/8/2019 Himpunan Motivasi
42/232
Persoalan asas manusia dan
hala tuju
Siapa diri kita?
Kenapa saya dijadikan?
Kemana Saya akan pergi?
Manusia dan penciptanya
8/8/2019 Himpunan Motivasi
43/232
Manusia dan penciptanya 3 asas peribadi agar manusia selamat mengharungi lautan hidupnya;
Mestilah jiwanya diisi dengan IMAN, kerana iman itu menjadi pengikat
hati antara manusia dgn tuhanya. Orng yg beriman akan berpegang teguhkepadanya beerti mentaati segala perintah dan larangan ALLAH sepertitertulis dalam alquran
Mindanya mestiah diisi dgn ILMU PENGETAHUAN kerana ilmu menjadimodal manusia mencari kebahadgian hidupnya di dunia dan akhirat
Hidupnya wajib diisi dengan AMAL perbuatan kebajikan terhadap tuhan
dan sesama manusia, kerana amal adalah jambatan setiap manusia utkmendapatkan keinginan-keinginan dan hajat-hnajtnya, adalah pangkalkebahagian hidup manusia.
TAZKIRAHTAZKIRAH
8/8/2019 Himpunan Motivasi
44/232
TAZKIRAHTAZKIRAH
KEBERKATAN HIDUPKEBERKATAN HIDUP
MOHD ZAIDI SIDEKMOHD ZAIDI SIDEK
Dipet ik dar i t uli san oleh:
Drs. H. Ahmad Yani
PENGENALAN
8/8/2019 Himpunan Motivasi
45/232
PENGENALAN
Setiap orang ingin keberkatan dalamhidupnya.
Kerana itu, kita selalu berdo'a dan
meminta orang lain mendoakan kita
agar segala sesuatu yang kita miliki dan
kita usahakan memperoleh keberkatandari Allah Swt.
Contoh:1. Hadir ke majlis ilmu.
2. Setiap kali majlis - mohon keberkatan
MAKSUD
8/8/2019 Himpunan Motivasi
46/232
Terjemahan tumbuh@ bertambahBerkat adalah kebaikan yang bersumber
dari Allah yang ditetapkan terhadap
sesuatu sebagaimana mestinya sehinggaapa yang diperoleh dan dimiliki akan
selalu berkembang dan bertambah besarmanfaat kebaikannya.
Kalau sesuatu yang kita miliki membawa
pengaruh negatif, maka ini bermakna kitatidak memperoleh keberkatan yangdiidamkan itu.
MAKSUD
BERKAT BUKAN PERCUMA
8/8/2019 Himpunan Motivasi
47/232
BERKAT BUKAN PERCUMA
Namun, Allah Swt tidak sembaranganmemberikan keberkatan kepada manusia.Ternyata, Allah hanya akan memberi berkatkepada orang yang beriman dan bertaqwakepada-Nya.
Janji Allah untuk memberikan keberkatankepada orang yang beriman dan bertaqwa
dikemukakan dalam firman-Nya yangmaksudnya:
Jikalau sekiranya penduduk negeri-negeri berimandan bertaqwa, pastilah Kami akan melimpahkankepada mereka berkat dari langit dan bumi, tetapimereka mendustakan (ayat-ayat Kami) itu, maka
Kami siksa mereka disebabkan perbuatannya"(QS Al Araf@7:96).
BERKAT DALAM KEHIDUPAN!
8/8/2019 Himpunan Motivasi
48/232
BERKAT DALAM KEHIDUPAN!
Apabila manusia, baik secara peribadi ataupunmasyarakat memperoleh keberkatan dari Allah
Swt, maka kehidupannya akan selalu berjalan
dengan baik, rezeki yang diperolehnya cukup
bahkan melimpah, sedang ilmu dan amalnya
selalu memberi manfaat yang besar dalam
kehidupan.
Disinilah letak pentingnya bagi kita memahami
apa sebenarnya keberkatan itu agar kita akanberusaha semaksima mungkin untuk meraihnya.
Masalah timbul bila manusia lalai dalam
8/8/2019 Himpunan Motivasi
49/232
soal menjaga keberkatan;Dalam konteks pendidikan banyak
masalah timbul berkaitan seperti tidur
dalam kelas, meniru semasa
peperiksaan dsb kerana tak faham
maksud ilmu yang berkat.Dalam konteks pekerjaan masalah
penyelewangan, rasuah dsb berlakukerana tak faham berkat dalam harta
8/8/2019 Himpunan Motivasi
50/232
Berkat rezeki kerana sedekah - Kekayaantidak membawa erti tanpa ada keberkatan.Dengan adanya keberkatan, harta/rezeki
yang sedikit akan dirasakan seolah-olahbanyak dan mencukupi. Sebaliknya tanpakeberkatan akan dirasakan sempit dan susahmeskipun banyak harta.
Menginfaqkan (Belanjakan) harta adalahberkat, sebaliknya menahannya adalah
celaka. Dalam 1 hadis, nabi bersabdatakutilah api neraka walaupun dengansebelah biji tamar. Dan sabdanya lagisedekah itu penghapus dosa sebagaimanaair memadam api.
BENTUK KEBERKATAN
8/8/2019 Himpunan Motivasi
51/232
Secara umum, keberkatan yang diberikan Allahkepada orang yang beriman terbahagi tiga.
1. Berkat dalam keturunan-dengan lahirnyagenerasi yang soleh.Generasi yang soleh adalah yang kuat
imannya, luas ilmunya dan banyak amal
solehnya dan berkualiti yg memang menjadikeinginan setiap manusia.
Pembangunan Islam dan umat Islam salah
satu faktornya adalah adanya berpaksikandari generasi yang soleh yg memilikijasmani yang kuat, kemandirian termasukdalam soal harta dan mampu menjalanikehidupan dengan sebaik-baiknya.
Contoh: Telah diperoleh Nabi Ibrahim as dankeluarganya yang ketika usia mereka sudah
8/8/2019 Himpunan Motivasi
52/232
keluarganya yang ketika usia mereka sudah
begitu tua ternyata masih dikurniakan anak,bahkan tidak hanya Ismail yang soleh, sehatdan cerdas, tapi juga Ishak dan Yakub.
Di dalam Al-Qur'an keberkatan semacam inidiceritakan oleh Allah yang maksudnya:"Dan isterinya berdiri (dibalik tirai) lalu dia tersenyum.Maka Kami sampaikan kepadanya berita gembira
tentang kelahiran Ishak dan dari Ishak (akan lahirputeranya) Yakub." Isterinya berkata: "Sungguhmenghairankan, apakah aku akan melahirkan anak,padahal aku adalah perempuan seorang perempuantua, dan ini suamikupun dalam keadaan yang sudah
tua pula?. Sesungguhnya ini benar-benar suatu yangsangat aneh". Para malaikat itu berkata: "Apakahkamumerasa heran tentang ketetapan Allah? (itu adalah)rahmat Allah dan keberkatan-Nya, dicurahkan atas
kamu, hai ahlul bait. Sesungguhnya Allah MahaTerpuji lagi Maha Pemurah"
(QS 11:71-73).
2. Keberkatan makanan- halal & thayyib.
P d t l hli t f i (Ib K t i )
8/8/2019 Himpunan Motivasi
53/232
Pendapat ulama ahli tafsir (Ibnu Katsir) -
antara keberkatan dari langit dan bumi ygdisebutkan surat Al A'raf: 96 ialah makanan.
Yang dimaksud makanan yang halal - halal
jenisnya, halal dalam mendapatkannya,sehingga bagi orang yang diberkati Allah, diatidak akan menghalalkan segala cara dalammemperoleh nafkah.
Makanan yang diberkati juga adalah yangthayyib( berzat) - yang tidak hanyamengenyangkan tapi juga menghasilkan
tenaga yang kuat untuk digunakan dlmmelaksanakan suruhan Allah Swt,"Dan makanlah makanan yang halal lagi baik dari apayang telah Allah rizkikan kepadamu, dan bertaqwalah
kepada Allah yang kamu beriman kepada-Nya"(QS 5:88).
Bagi membawa keberkatan yang lebih banyaklagi, makanan itu harus dimakan sewajarnya
8/8/2019 Himpunan Motivasi
54/232
g , j ykerana Allah sangat melarang manusia berlebih-lebihan dalam makan mahupun minum, AllahSwt berfirman yang maksudnya:
"Hai anak Adam, pakailah pakaianmu yang indah di
setiap memasuki masjid, makan dan minumlah danjanganlah berlebih-lebihan. Sesungguhnya Allahtidak menyukai orang-orang yang berlebih-lebihan"(QS 7:31).
Ajarkanlah anak2 dgn doa2 sebelum melakukanpekerjaan @ sekurang-kurangnya membaca"Bismillahir Rahmanir Rahim". Ini akan
menambahkan keberkatan Allah bagi perbuatantersebut.Sabda Rasulullah s.w.t, maksudnya:"Setiap perkara yang tidak dimulakan denganBismillah maka akan terputus rahmat dan barkah
bagi perbuatan tersebut."
KUNCI KEBERKATAN
8/8/2019 Himpunan Motivasi
55/232
Dengan demikian menjadi jelas bagi kitabahawa sebagai seorang muslim,
keberkatan dari Allah untuk kitamerupakan sesuatu yang amat penting.
Kerana itu, ada kunci yang harus kita
miliki dan usahakan dalam hidup ini.
Sekurang-kurangnya, ada dua faktor
yang menjadi kunci keberkatan itu.
1.Iman dan Taqwa Yang BenarDi d l t di t d h dik k k
8/8/2019 Himpunan Motivasi
56/232
Di dalam ayat di atas, sudah dikemukakan
bahawa Allah akan memberikan berkat kpdhambanya yg beriman & bertaqwa kpd-Nya.
Semakin mantap iman dan taqwa yang kita
miliki, maka semakin besar keberkatan yangAllah berikan kepada kita. Kerana itu menjadikeharusan kita untuk terus memperkokohiman dan taqwa kepada Allah Swt.
Salah satu ayat yang amat menekankanpeningkatan taqwa kepada orang yangberiman adalah firman Allah yang maksudnya;
Hai orang-orang yang beriman, bertaqwalahkamu kepada Allah dengan sebenar-benar taqwadan jangan sampai kamu mati kecuali dalamkeadaan berserah diri/muslim"
(QS 3:102).
Keimanan dan ketaqwaan yang benar
8/8/2019 Himpunan Motivasi
57/232
q y g
selalu ditunjukkan oleh seorang mu'mindalam bentuk melaksanakan perintahAllah dan meninggalkan larangan-Nya,
baik dalam keadaan senang maupunsusah, dalam keadaan sendiri maupunbersama orang lain.
Tegasnya keimanan dan ketaqwaan itudibuktikan dalam situasi dan keadaan
yang bagaimananpun juga dandimanapun kita berada.
2.Berpedoman kepada Al-Qur'an
8/8/2019 Himpunan Motivasi
58/232
Al-Quran merupakan sumber keberkatansehingga apabila kita menjalankan pesan-pesan yang terkandung di dalam Al-Qurandan berpedoman kepadanya dalam berbagai
aspek kehidupan, nescaya kita akanmemperoleh keberkatan dari Allah Swt
Allah berfirman yang maksudnya:
"Dan Al-Quran ini adalah suatu kitab (peringatan) yangmempunyai berkat yang telah kami turunkan. Makamengapakah kamu mengingkarinya?"
(QS 21:50).
KESIMPULAN D l k hid g kit l l i i i ti kit
8/8/2019 Himpunan Motivasi
59/232
Dalam kehidupan yang kita lalui ini, setiap kita
harus mengimani kebenaran Al-Qur'an yangmana ianya merupakan wahyu dari Allah Swt
Luangkan masa untuk kita membaca Al-Qurandan jadikannya rujukan dalam kehidupan sehari-hari, baik menyangkut aspek peribadi, keluarga,masyarakat maupun bernegara.
Akhirnya menjadi jelas bagi kita bahawa,keberkatan dari Allah yang kita inginkan ituhanya diperolehi melalui doa dan usaha yang
sungguh-sungguh, yakni dalam bentukmemantapkan iman dan taqwa sertamenjadikan Al-Quran sebagai pedoman dalam
hidup ini.
8/8/2019 Himpunan Motivasi
60/232
BILA SAMPAI MASA
8/8/2019 Himpunan Motivasi
61/232
Pada suatu masa yang ditetapkan.Kita pasti dirisik.
Pertunangan sejak azali.Di hujung hidup nanti.Berlangsung perkahwinanmu dengan maut?Hantarannya..sakit dan nazak.Tamu bertandang menghadirkan esak.
Pengantin dimandikan.Dipakaikan baju cantik putih..Wangian gaharu dan cendana..
Keranda jadi pelaminan..
8/8/2019 Himpunan Motivasi
62/232
Pengantin bersanding sendirian
Di arak keliling kampung..
Berkompangkan azan dan kalimah kudusAkad nikahnya bacaan talkin.
Berwalikan liang lahad..Saksi pula nisan-nisan..
Siraman air mawar..
Keluarga terdekat menepung tawar..Tiba masa pengantin..
Menunggu sendirian..
8/8/2019 Himpunan Motivasi
63/232
Malam pertama bersama KEKASIH..
Di kamar bertilamkan tanah..
Dan Dia menuntut janji..Sucikah kita tatkala berpadu..
Pernahkah taubat sepanjang hayat..Atau terkubur bersama dosa-dosa..
Dan Dia Kekasih itu..
Menetapkanmu ke Syurga
Atau melemparkan dirimu ke neraka
8/8/2019 Himpunan Motivasi
64/232
Dunia ini hanyalah persinggahan
Akhirat jua kekal abadi
Siapkanlah bekalan kita untuk ke SANA
Moga kita di dalam golongan yg sentiasa
di dlm BERKAT-NYA
AMEN.....
8/8/2019 Himpunan Motivasi
65/232
KONSEP KERJA DALAMISLAM
(sedutan : Pusat Kutipan ZakatPahang)
Penyampai : Mohd Zuki Bin Salleh
8/8/2019 Himpunan Motivasi
66/232
Kemuliaan seseorang insan itubergantung kepada apa yang
dilakukannya.
8/8/2019 Himpunan Motivasi
67/232
Istilah kerja dalam Islam bukan semata-mata merujuk kepada mencari rezeki hidupuntuk diri dan keluarga dengan berhempas
pulas siang dan malam, serta pagi danpetang tanpa mengira waktu atau ketika,
tetapi ia mencakupi segala bentuk amalanatau pekerjaan yang mempunyai unsurkebaikan dan keberkatan bagi diri, ahli
keluarga dan masyarakat sekelilingnya dan
seterusnya negara
8/8/2019 Himpunan Motivasi
68/232
Sebaliknya al-Quran menggariskangolongan yang baik lagi berjaya (al-falah)itu adalah orang yang banyak taqwamereka kepada Allah, khusyuk
sembahyangnya, baik tutur katanya,memelihara pandangan dan kemaluannyaserta menunaikan tanggungjawab
sosialnya seperti mengeluarkan zakat danseumpamanya (lihat Quran, al-Muminun:1-11)
8/8/2019 Himpunan Motivasi
69/232
Dalam satu hadis seperti mana telah
diriwayatkan oleh Saidina Umar al-Khattabberbunyi: Bahawasanya setiap amalan itubergantung kepada niat, dan setiap
individu itu dikira berdasarkan apa yangdiniatkannya
8/8/2019 Himpunan Motivasi
70/232
Rasulullah SAW pernah bersabda:Binasalah orang-orang Islam kecualimereka yang berilmu. Maka binasalahgolongan berilmu, kecuali mereka yang
beramal dengan ilmu mereka. Danbinasalah golongan yang beramal denganilmu mereka kecuali mereka yang ikhlas.
Sesungguhnya golongan yang ikhlas inijuga masih dalam keadaan bahaya yangamat besar
8/8/2019 Himpunan Motivasi
71/232
Alangkah baiknya kalau umat Islam hari ini,dapat bergerak dan bekerja dengan tekun
dengan matlamat yang satu iaitu mardatillah(keredhaan Allah) itulah yang dicari dalam apa
jua urusan yang dibuat. Dari situlah akan lahirnilai keberkatan yang sebenar dalam hidupdengan curahan nikmat Allah yang banyak.
Inilah golongan yang diistilahkan sebagai tenangdalam ibadah, redha dengan kehidupan yangditempuhi, serta optimis dengan janji-janji Allah
8/8/2019 Himpunan Motivasi
72/232
Sekian terima kasih
8/8/2019 Himpunan Motivasi
73/232
MALU!!??MALU!!??
HADITH KEHADITH KE--2020
8/8/2019 Himpunan Motivasi
74/232
Dari AbuDari Abu MasMasudud,, UqbahUqbah binbin AmruAmru AlAl--AnshariAnshari AlAl BadhriBadhriR.A. :R.A. : TelahTelah bersabdabersabda RasulullahRasulullah SAW:SAW:
DiDi antaraantara sabdasabda parapara NabiNabi yangyang terdahuluterdahulu yangyangmasihmasih dipakaidipakai untukuntuk orangorang ramairamai ((hinggahingga keke harihari iniini))ialahialah:: JikaJika engkauengkau tidaktidak malumalu,, buatlahbuatlah sesukasesuka hatimuhatimu
((RiwayatRiwayat AlAl-- BukhariBukhari))
DipetikDipetik daridari:: KuliahKuliahSubuhSubuh;;PadaPadaMembicarakanMembicarakanHadithHadith4040,, susunansusunan dandan ulasanulasan:: SyedSyed AhmadAhmad SemaitSemait,, PustakaPustakaNasionalNasional SingapuraSingapura, 1991, 1991
MUQADDIMAHMUQADDIMAH
8/8/2019 Himpunan Motivasi
75/232
HadithHadith yangyang merupakanmerupakan lebihlebih kepadakepada
sindiransindiran
daripadadaripada
tegahantegahan
,,
yakniyakni
suatusuatu
sindiransindiran yangyang mengandungimengandungi ancamanancaman..
SifatSifat malumalu adalahadalah pokokpokok akhlakakhlak muliamulia dandan
budipekertibudipekerti yangyang tinggitinggi..
MembezakanMembezakan antaraantara manusiamanusia dandan haiwanhaiwan..
PeliharalahPeliharalah sifatsifat malumalu agaragar muliamulia disisidisisiagamaagama dandan AllahAllah TaalaTaala..
YANG MALU & TAK MALUYANG MALU & TAK MALU
8/8/2019 Himpunan Motivasi
76/232
ParaPara ulamaulama sepakatsepakat bahawabahawa malumalu adalahadalahsebaiksebaik--baikbaik sifatsifat yangyang harusharus disifatidisifati oleholeh
manusiamanusia..
HakikatHakikat duniadunia,, adaada yangyang malumalu dandan taktak
malumalu.. BilanganBilangan yangyang malumalu pastinyapastinya lebihlebihramairamai daridari yangyang malumalu..
SenarioSenario terkiniterkini,, sedikitsedikit yangyang taktak malumalu iniini
telahtelah mempengaruhimempengaruhi seluruhseluruh duniadunia padapadapelbagaipelbagai lapisanlapisan masyarakatmasyarakat..
8/8/2019 Himpunan Motivasi
77/232
SabdaSabda NabiNabi SAW:SAW:
SifatSifat malumalu ituitu segalasegala--galanyagalanya baikbaik.. SifatSifat
malumalu ituitu mendatangkanmendatangkan yangyang baikbaik sematasemata--
matamata
8/8/2019 Himpunan Motivasi
78/232
MALU MACAM MANA YANG BAIK?MALU MACAM MANA YANG BAIK?MALU MACAM MANA YANG TAK BAIK?MALU MACAM MANA YANG TAK BAIK?
MALU KERANA MENJAGAMALU KERANA MENJAGA
TATATERTIB & SOPAN SANTUN
8/8/2019 Himpunan Motivasi
79/232
TATATERTIB & SOPAN SANTUN& SO S U
MenjagaMenjaga tatatertibtatatertib,, bersopanbersopan dalamdalam
percakapanpercakapan,, dalamdalam kelakuankelakuan,, gerakgerak--gerigeri,,
dandan pergaulanpergaulan..
JugaJuga tidaktidak berguraubergurau sendasenda yangyang
keterlaluanketerlaluan tanpatanpa mengiramengira tempattempat dandansuasanasuasana..
JugaJuga tidaktidak bergaulbergaul bebasbebas antaraantara lelakilelaki dandanperempuanperempuan
MALU KERANA BERBUAT YANGMALU KERANA BERBUAT YANG
MUNGKAR
8/8/2019 Himpunan Motivasi
80/232
MUNGKAR
MenyedariMenyedari diridiri telahtelah melakukanmelakukan kesalahankesalahan,, malumaludiketahuidiketahui masyarakatmasyarakat dandan keluargakeluarga..
MaluMalu dikatakandikatakan rendahrendah akhlakakhlak,, tidaktidak bermaruahbermaruah
MaluMalu atasatas maksiatmaksiat yangyang orangorang lainlain lakukanlakukan..
AdanyaAdanya sifatsifat malumalu menandakanmenandakan adanyaadanya imaniman,,
keranakerana malumalu adalahadalah sebahagiansebahagian daridari imaniman..
MALU KERANA MENCEGAHMALU KERANA MENCEGAH
YANG MUNGKARYANG MUNGKAR
8/8/2019 Himpunan Motivasi
81/232
MaluMalu hendakhendak mencegahmencegah perkaraperkara mungkarmungkar yangyangberlakuberlaku didi hadapanhadapan atauatau belakangbelakang kitakita..
MaluMalu keranakerana keakrabankeakraban,, ketinggianketinggian pangkatpangkat,,kedewasaankedewasaan,, kedudukankedudukan dalamdalam masyarakatmasyarakat..
MaluMalu dikatakandikatakan cubacuba berlagakberlagak alimalim dandan tunjuktunjuk
baikbaik..MaluMalu keranakerana kitakita punpun sebahagiansebahagian daripadadaripadamerekamereka.. BahayaBahaya!!!!
BuatBuat maksiatmaksiat berdosaberdosa!! MaluMalu menegurmenegur punpunberdosaberdosa!!
MALU KERANA BELAJARMALU KERANA BELAJAR
HUKUM AGAMA ATAU ILMUHUKUM AGAMA ATAU ILMU
8/8/2019 Himpunan Motivasi
82/232
YANG TIDAK TAHUYANG TIDAK TAHU
MaluMalu hendakhendak bertanyabertanya hukumhukum atauatau yangyang
taktak tahutahu atauatau
MaluMalu dikatakandikatakan bodohbodoh,, bebalbebal,, dandan lembablembab..
MaluMalu mengakuimengakui kesalahankesalahan atauataukekurangankekurangan padapada diridiri.. TapiTapi IngatIngat!!MenyebarkanMenyebarkan keburukankeburukan dandan kelemahankelemahan
orangorang adalahadalah HARAM!HARAM!MaluMalu sebeginisebegini membawamembawa kepadakepada dosadosa,,
ibadatibadat tidaktidak diterimaditerima,, rugirugi didi akhiratakhirat..
HAKIKAT MALUHAKIKAT MALU
8/8/2019 Himpunan Motivasi
83/232
MaluMalu yangyang khususkhusus (paling(paling muliamulia)) adalahadalahmalumalu kepadakepada ALLahALLah SWT.SWT.
Allah yangAllah yang memberikanmemberikan nikmatnikmat yangyangpelbagaipelbagai,, naiknaik kedudukankedudukan,, pangkatpangkat,, darjatdarjat
ilmuilmu,, kesenangankesenangan dsbdsb..AdakahAdakah patutpatut kitakita kufurkufur kepadakepada nikmatnikmatALLahALLah??
PatuhiPatuhi segalasegala suruhansuruhan,, tegahtegah dandan jauhijauhisegalasegala laranganlarangan..
KESIMPULANKESIMPULAN
8/8/2019 Himpunan Motivasi
84/232
SebagaiSebagai Muslim,Muslim, kitakita harusharus mempunyaimempunyairasarasa malumalu yangyang tinggitinggi terhadapterhadap ALLahALLah dandan
jugajuga manusiamanusia..MaluMalu terhadapterhadap ALLahALLah dengandengan menjagamenjaga
segalasegala suruhansuruhan dandan menjauhimenjauhi dandanmencegahmencegah segalasegala laranganlarangan..
MaluMalu terhadapterhadap manusiamanusia dengandengan menjagamenjaga
segalasegala akhlakakhlak dalamdalam pergaulanpergaulan dandanmuammalahmuammalah sesamasesama insaninsan..
8/8/2019 Himpunan Motivasi
85/232
SEKIAN, TERIMA KASIHSEKIAN, TERIMA KASIH
AlAl--haqirhaqir walwal faqiirufaqiiru--ilALLahilALLah::
MOHD FADZIL ABDUL RAHIMMOHD FADZIL ABDUL RAHIM
8/8/2019 Himpunan Motivasi
86/232
Matlamat Hidup Muslim
MATLAMAT HIDUP1. GOLONGAN MANUSIA YANG HIDUPNYA
HANYA UNTUK DUNIA
8/8/2019 Himpunan Motivasi
87/232
PEMBAHAGIAN MANUSIADI DUNIA MENURUTPANDANGAN ISLAM
HANYA UNTUK DUNIA
2. GOLONGAN YANGTERCARI-CARI ANTARADUNIA DAN AKHIRAT
3. GOLONGAN YANG MENGANGGAP BAHAWADUNIA SEBAGAI LADANG AKHIRAT
Sumber:Buku: Apa erti saya menganut Islam
1. GOLONGAN MANUSIA YANG HIDUPNYA
HANYA UNTUK DUNIA
8/8/2019 Himpunan Motivasi
88/232
HANYA UNTUK DUNIA
2. GOLONGAN YANGTERCARI-CARI ANTARADUNIA DAN AKHIRAT
3. GOLONGAN YANG MENGANGGAP BAHAWADUNIA SEBAGAI LADANG AKHIRAT
DENGAN MERUJUK KEPADA
AKTIVITI-AKTIVITI HARIAN ANDA(AKTIVITI SEBELUM CUTI)SERTA MATLAMAT-MATLAMATYANG TELAH ANDA SEBUTKANSILA KENALPASTI DI MANAKAH
KEDUDUKAN ANDA ANTARA TIGAGOLONGAN INI
ARAHAN 2:
1. GOLONGAN MANUSIA YANG HIDUPNYAHANYA UNTUK DUNIA
M k k l t i li tik d i d t
8/8/2019 Himpunan Motivasi
89/232
Mereka merupakan golongan materialistik dari sudutaqidah dan realiti kehidupan mereka sendiri.
1. Dunia menjadi tujuan dan matlamat terbesar hidup mereka
2. Menyangka bahawa segala sesuatu adalah terhasil daripadausaha mereka sendiri.
Ciri-ciri:
Hakikat matlamat ini:
Mengkufuri kewujudan kehidupan selepas daripadakehidupan dunia
3. Tenggelam dalam perjalanan mengejar kenikmatan dunia.
2. GOLONGAN YANG TERCARI-CARI ANTARADUNIA DAN AKHIRAT
8/8/2019 Himpunan Motivasi
90/232
Mereka merupakan kebanyakan daripada manusia yang aqidahnyagoyah (sentiasa ragu-ragu) dan banyak melakukan amalan sia-siadalam kehidupan dunia tetapi dalam masa yang sama menyangkamereka di kalangan golongan yang melakukan kebaikan.
Ciri-ciri:
1. Beriman kepada Allah SWT dan hari akhirat tetapi pada
hakikatnya ia terpisah daripada realiti kehidupan mereka.2. Kehidupan mereka lebih cenderung kepada gaya hidup
golongan materialistik walaupun melaksanakan beberapaaktiviti kerohanian.
3. GOLONGAN YANG MENGANGGAP BAHAWADUNIA SEBAGAI LADANG AKHIRAT
8/8/2019 Himpunan Motivasi
91/232
DUNIA SEBAGAI LADANG AKHIRAT
Mereka merupakan mukmin sebenar yang mengetahui hakikat
kehidupan ini dan mengerti berkenaan perbezaan nilai kehidupanakhirat berbanding kehidupan dunia.
Kehidupan dunia mereka tidak lalai daripada menepati tujuan(matlamat)kehidupan mereka yang sebenar iaitu mengabdikan
diri kepada Allah SWT.
CIRI-CIRI
8/8/2019 Himpunan Motivasi
92/232
Tiadalah hidup di dunia ini melainkan permainan dan pergurauan.Sesungguhnya kampung akhirat, lebih baik bagi orang-orang yangbertaqwa. Apa tidakkah kamu memikirkan ?
(Al Anam 6 : 32 )
HAKIKAT KEHIDUPAN DUNIA DAN AKHIRAT
8/8/2019 Himpunan Motivasi
93/232
APAKAH MATLAMAT HIDUP MUSLIMYANG SEPATUTNYA???
PERANAN MATLAMAT DALAM MENCORAKKAN TINDAKAN
8/8/2019 Himpunan Motivasi
94/232
Minda HatiPancainderaAmalan
Amalan
MATLAMAT
MATLAMAT YANG TERSEMAT KUKUH DI HATI DAPATMENGIKAT MINDA DAN PANCAINDERA BERFUNGSIKE ARAH MEREALISASIKAN APA YANG DIMATLAMATKAN
TERSEBUT
PERANAN MATLAMAT DALAM MENCORAKKAN TINDAKAN
KES 1: MATLAMAT HIDUP: MENJADI KAYA (SAHAJA)
8/8/2019 Himpunan Motivasi
95/232
Minda HatiPancainderaAmalan
Amalan
MATLAMAT
SETIAP TINDAKAN AKAN DISELARASKANDENGAN MATLAMAT
IMPLIKASI: SETIAP TINDAKAN AKAN TERSERLAH UNSUR-UNSUR YANGMENGGAMBARKAN KEINGINAN YANG TINGGI UNTUK MENCAPAI MATLAMAT
TERSEBUT SEPERTI KESUNGGUHAN, DISIPLIN TETAPI TIADA YANG DAPATMENCEGAHNYA DARIPADA MELAKUKAN PECAH AMANAH, KHIANAT DSBUNTUK MENCAPAI MATLAMAT TERSEBUT
PERANAN MATLAMAT DALAM MENCORAKKAN TINDAKAN
KES 2: MATLAMAT HIDUP: KEREDHAAN ALLAH
8/8/2019 Himpunan Motivasi
96/232
Minda HatiPancainderaAmalan
Amalan
MATLAMAT
SETIAP TINDAKAN AKAN DISELARASKANDENGAN MATLAMAT
IMPLIKASI: SETIAP TINDAKAN AKAN TERSERLAHUNSUR-UNSUR YANG MENGGAMBARKAN KETAATANTERHADAP ALLAH SEPERTI AMANAH, JUJUR
Seseorang yang memeluk Islam dengan sebenar beranggapan bahawa
8/8/2019 Himpunan Motivasi
97/232
MATLAMAT HIDUP ANDA: ANDA MEMBUAT KEPUTUSAN ???
Seseorang yang memeluk Islam dengan sebenar beranggapan bahawadunia sebagai medan untuk berlumba-lumba mentaati perintah Allah danmendapatkan redha-Nya. Seluruh kehidupannya menjurus ke arah tujuantersebut.
Golongan materialistik sentiasa berlumba-lumba dalam kehidupan iniuntuk tujuan memenuhi nafsu dan syahwat mereka.
Matlamat hidupmenjadi panduandalam kehidupan
PERJALANAN HIDUP MANUSIA
8/8/2019 Himpunan Motivasi
98/232
ALAM AKHIRATALAM BARZAKHALAM DUNIAALAM RAHIM
DARI ALLAH KEPADA ALLAH
SILA KAJI KEMBALI MATLAMAT HIDUP ANDA DENGANMENGAMBIL KIRA PERKARA BERIKUT:DI MANA AKU SEBELUM AKU LAHIR?UNTUK APA AKU DIJADIKAN?KE MANA AKU AKAN PERGI SELEPAS INI?
8/8/2019 Himpunan Motivasi
99/232
TERIMA KASIH
8/8/2019 Himpunan Motivasi
100/232
OVERVIEW OF PRESENTATION:OVERVIEW OF PRESENTATION:
8/8/2019 Himpunan Motivasi
101/232
1.1. INTRODUCTIONINTRODUCTION
2.2. LITERATURE REVIEWLITERATURE REVIEW
3.3. PROBLEM FORMULATION ANDPROBLEM FORMULATION AND
RESEARCH METHODOLOGYRESEARCH METHODOLOGY
4.4. RESULT AND DISCUSSIONRESULT AND DISCUSSION
5.5. CONCLUSIONCONCLUSION
INTRODUCTIONINTRODUCTION
ErgonomicsErgonomics-- the application of knowledge of human characteristics tothe application of knowledge of human characteristics tothe design of systemsthe design of systems
8/8/2019 Himpunan Motivasi
102/232
the design of systems.the design of systems.
Environmental ergonomics is concerned with how the people interaEnvironmental ergonomics is concerned with how the people interactct
with the environment from the perspective of ergonomics.with the environment from the perspective of ergonomics.
There are numerous factors that can make up a working environmenThere are numerous factors that can make up a working environment.t.
These include noise, vibration, light, heat and cold, particulatThese include noise, vibration, light, heat and cold, particulates in thees in the
air, gases, air pressures, gravity, etc.air, gases, air pressures, gravity, etc.
There is a continuous and dynamic interaction between people andThere is a continuous and dynamic interaction between people and
their environments that produces physiological and psychologicaltheir environments that produces physiological and psychological
strain on the personstrain on the person
This can lead to discomfort, annoyance, subtle and direct affectThis can lead to discomfort, annoyance, subtle and direct affects ons on
performance and productivity, affects on health and safety, andperformance and productivity, affects on health and safety, and deathdeath
which also dramatically affected the performance of the workers.which also dramatically affected the performance of the workers.
Noise can have direct and indirect effects on workers' health. LNoise can have direct and indirect effects on workers' health. Longong--termterm
exposure to noise causes noiseexposure to noise causes noise--induced hearing loss.induced hearing loss.
Through the set of these studies an effort was made to investigaThrough the set of these studies an effort was made to investigate thete the
8/8/2019 Himpunan Motivasi
103/232
g gg g
effect of noise on industrial worker.effect of noise on industrial worker.
For this purpose in course of investigations the impact of varyiFor this purpose in course of investigations the impact of varying differentng different
work environments with different levels of noise on human operatwork environments with different levels of noise on human operators wasors was
explored.explored.
The noises levels selected were representatives of three differThe noises levels selected were representatives of three differ
entent
industries prevalent in the Malaysian context.industries prevalent in the Malaysian context.
The sites of research were rubber boots and shoes industry, highThe sites of research were rubber boots and shoes industry, high
precision CNC turning/metal stamping components industry andprecision CNC turning/metal stamping components industry andnewspaper printing plant.newspaper printing plant.
LITERATURE REVIEWLITERATURE REVIEW
Basic Physic of SoundBasic Physic of Sound
Sound may be defined as the auditory sensation produced by theseSound may be defined as the auditory sensation produced by theseill ti (B id 1995)ill ti (B id 1995)
8/8/2019 Himpunan Motivasi
104/232
pressure oscillations (Bridger, 1995).pressure oscillations (Bridger, 1995).
Bridger (1995) also defined noise as a sound or sounds at suchBridger (1995) also defined noise as a sound or sounds at such
amplitude as to annoyance or to interfere with communication.amplitude as to annoyance or to interfere with communication. Sound can be measured objectively but noise is a subjectiveSound can be measured objectively but noise is a subjective
phenomenonphenomenon
Kroemer et al. (2001) mentioned that noise is psychological andKroemer et al. (2001) mentioned that noise is psychological andsubjectivesubjective
Single, short tones of low intensity may be considered noise undSingle, short tones of low intensity may be considered noise underercertain conditions, just as loud, lasting, complex sounds may becertain conditions, just as loud, lasting, complex sounds may bedeemed noise under other circumstances.deemed noise under other circumstances.
The frequencies or frequencies distributions of both are measureThe frequencies or frequencies distributions of both are measured ind inHertz (Hz), their intensities in amplitude and sound pressure leHertz (Hz), their intensities in amplitude and sound pressure levels invels in
logarithmic manner units known as decibels (dB).logarithmic manner units known as decibels (dB).
8/8/2019 Himpunan Motivasi
105/232
Sound and Noise MeasurementsSound and Noise Measurements
The Occupational Safety and Health Act (Public Law 91The Occupational Safety and Health Act (Public Law 91--596) of Office596) of Office
of Safety and Health Administration (OSHA) of America establisheof Safety and Health Administration (OSHA) of America established ad aregulation that said a maximum noise level of 90 dBA for a contiregulation that said a maximum noise level of 90 dBA for a continuousnuous
8/8/2019 Himpunan Motivasi
106/232
regulation that said a maximum noise level of 90 dBA for a contiregulation that said a maximum noise level of 90 dBA for a continuousnuous
88--hour exposure during a working day. Higher sound levels arehour exposure during a working day. Higher sound levels are
allowed for shorter exposure times. (Thumann and Miller,1986)allowed for shorter exposure times. (Thumann and Miller,1986)
Noise DosimetersNoise Dosimeters --integration of the noise measured at theintegration of the noise measured at the
microphones over period of time and expresses it as a percentagemicrophones over period of time and expresses it as a percentage ofof
the daily allowable noise dosethe daily allowable noise dose (Bridger,1995)(Bridger,1995)
Sound Level MetersSound Level Meters--used in noise measurements to cope with theused in noise measurements to cope with the
widely varying types of noise encountered in industry, commerciawidely varying types of noise encountered in industry, commerciall
meters usually have several responses modesmeters usually have several responses modes--normally, slow and fastnormally, slow and fast
and sometimes impulse response modes.and sometimes impulse response modes.
The Effec ts of NoiseThe Effec ts of Noise
Noise can create negative emotions, feeling of surprise, frustraNoise can create negative emotions, feeling of surprise, frustration,tion,
anger and fear.anger and fear.
8/8/2019 Himpunan Motivasi
107/232
The effects of noise also produce temporary or permanent alteratThe effects of noise also produce temporary or permanent alterationsions
in body chemistry and temporarily or permanently change onein body chemistry and temporarily or permanently change oness
hearing capability too. (Kroemer et al. 2001).hearing capability too. (Kroemer et al. 2001).
The major effects of noise were physiological stress, NThe major effects of noise were physiological stress, N--reactions (nonreactions (non--
auditory reactions), Temporary Threshold Shift (TTS), startle efauditory reactions), Temporary Threshold Shift (TTS), startle effect,fect,
auditory effects, Permanent Threshold Shift (PTS), acoustic trauauditory effects, Permanent Threshold Shift (PTS), acoustic trauma,ma,
psychological effects, sleep disturbances and speech interferencpsychological effects, sleep disturbances and speech interference.e.
Irritability, tenseness, insomnia are the diseases due to exposuIrritability, tenseness, insomnia are the diseases due to exposure tore to
high level of noise.high level of noise.
Preventing the Effec ts of NoisePreventing the Effec ts of Noise
Avoid generationAvoid generation
Impede transmissionImpede transmission
Leave the areaLeave the area Use of Hearing Protection Devices (HPD)Use of Hearing Protection Devices (HPD)
8/8/2019 Himpunan Motivasi
108/232
Use of Hearing Protection Devices (HPD)Use of Hearing Protection Devices (HPD)
Control Methods of Noise in Industrial SiteControl Methods of Noise in Industrial Site
Analyze processes and equipment during planning and design.Analyze processes and equipment during planning and design.
Substitute alternate equipments, materials, processes and activiSubstitute alternate equipments, materials, processes and activities forties for
quieter ones.quieter ones.
Modify the noise sources when it cannot be replaced.Modify the noise sources when it cannot be replaced.
Use enclosure to encloses a sound source or place sound absorbinUse enclosure to encloses a sound source or place sound absorbingg
materials on the surfaces of objects within or a room.materials on the surfaces of objects within or a room.
Some Basic steps in the Management of Industrial Noise ExposureSome Basic steps in the Management of Industrial Noise Exposure ShortShort--term measureterm measure--e.g. issue earplugs or earmuffse.g. issue earplugs or earmuffs
MediumMedium-- term measureterm measure--e.g. reposition noisy machinese.g. reposition noisy machines
LongLong--term measureterm measure--e.ge.g. implement an audiometric testing p rog ram. implement an audiometric testing p rog ram
PROBLEM FORMULATION ANDPROBLEM FORMULATION ANDRESEARCH METHODOLOGYRESEARCH METHODOLOGY
Present work pertains to the one of the most critical dimensionsPresent work pertains to the one of the most critical dimensions ofof
8/8/2019 Himpunan Motivasi
109/232
Present work pertains to the one of the most critical dimensionsPresent work pertains to the one of the most critical dimensions ofof
environment that is noise and its impacts on human workers. Theenvironment that is noise and its impacts on human workers. The
studies were confined to the industrial workers only. The hypothstudies were confined to the industrial workers only. The hypothesisesis
tested were:tested were:The industrial workers involved in respective researchedThe industrial workers involved in respective researched
industrial sites are negatively affected by the level of noiseindustrial sites are negatively affected by the level of noise
generated in their respective work environmentsgenerated in their respective work environments
The work environments studied pertained to the following respectThe work environments studied pertained to the following respectiveive
industrial site below:industrial site below:
Harvik Rubber Industries Sdn. Bhd. , Prai, Penang.Harvik Rubber Industries Sdn. Bhd. , Prai, Penang.
Wong Engineering Industries Sdn. Bhd,, Kulim, Kedah.Wong Engineering Industries Sdn. Bhd,, Kulim, Kedah.
The New Straits Times Press (M) Bhd., Prai, Penang.The New Straits Times Press (M) Bhd., Prai, Penang.
The variables explored spanned over following types:
Physiological effects variables
Psychological effects variables
Auditory effects variables Hearing loss effects variables
8/8/2019 Himpunan Motivasi
110/232
g
Sleep disturbances variables
The questionnaires were designed and the effects have been collectedthrough three types of answers. The categories answer were YES, NOandCANNOT SAY.
The questionnaires comprised of 40 items spanning over the followingkinds of the variables and circulated among the workers at each sites ofresearch.
The actual of noise to which workers were being exposed was recordedby using Logging Noise Dose Meter Type 4443.
These were done by standing at the workers place in 5 minute to record
the maximum level and average level of noise at those locations.
.
RESULT AND DISCUSSIONRESULT AND DISCUSSION The questionnaires that have been circulated have been answeredThe questionnaires that have been circulated have been answered byby
40 respondents or total 120 persons.40 respondents or total 120 persons.Result of the data analysis pertaining general information of reResult of the data analysis pertaining general information of respondents atspondents at
8/8/2019 Himpunan Motivasi
111/232
each siteeach site
Information Harvik Rubber Wong Engineering NSTP Printing
Male 24 persons(60 %) 35 persons(87.5%) 34 persons(85%)
Female16 persons
(40%)
5 persons
(12.5%)
6 persons
(15%)
16 to 25 years0 person
(0%)
8 persons
(20%)
2 persons
(5%)
25 to 40 years20 persons
(50%)
26 persons
(65%)
26 persons
(65%)
40 to 55 years20 persons
(50%)
6 persons
(15%)
11 persons
(27.5%)
More than 55 years0 person
(0%)
0 person
(0%)
1 person
(2.5%)
Married34 persons
(85%)
24 persons
(60%)
33 persons
(82.5%)
Unmarried 6 persons(15%)
16 persons(40%)
7 persons(17.5%)
Marital
status
Age
Sex
Less than a year0 persons
(0%)
6 persons
(15%)
3 persons
(7.5%)
One to two years1 person
(2.5%)
12 persons
(30%)
14 persons
(35%)
Two to five years4 persons
(10%)
7 persons
(17 5%)
2 persons
(5%)
Duration insection
8/8/2019 Himpunan Motivasi
112/232
Two to five years(10%) (17.5%) (5%)
More than five years35 persons
(87.5%)
15 persons
(37.5%)
21 persons
(52.5%)
Less than 1 Km0 person
(0%)
0 person
(0%)
0 person
(0%)
1 Km to 5 Km6 persons
(15%)
12 persons
(30%)
13 persons
(32.5%)
5 Km to 10 Km6 persons
(15%)
12 persons
(30%)
18 persons
(45%)
More than 10 Km28 persons
(70%)
6 persons
(15%)
9 persons
(22,5%)
Distance from
house toworkplace
Study of the noise level statusStudy of the noise level status
8/8/2019 Himpunan Motivasi
113/232
Study of the noise level statusStudy of the noise level status
existing at different sites inexisting at different sites inHarvik Rubber, WongHarvik Rubber, Wong
Engineering and NSTP PrintingEngineering and NSTP Printing
Status of equivalent noise at different locations in the HarvikStatus of equivalent noise at different locations in the HarvikRubberRubber
NO. OF
PLACE
NAME OF PLACE MAXIMUM
(dBA)
LEQ
(dBA)
1 Preparation Section 84.3 78,4
8/8/2019 Himpunan Motivasi
114/232
2 Moulding Section 88.8 80,1
3 Skim Calender Section 90.6 85,1
4 Mixing Section 89.1 84,6
5 Cutting Section 94.3 80,4
6 Assembly Section 96.7 84,7
7 Vulcaniser Section 82.8 80,3
8 Finish Good Inspection Section 86.4 75,5
9 Air Compressor Room 88.6 87,5
10 Boiler Room 93.4 90,7
11 Maintenance Workshop 88.4 81,3
Graphical comparison of noise levels at different locations at HGraphical comparison of noise levels at different locations at Harvik Rubberarvik Rubber
120
Maximum (dBA)
8/8/2019 Himpunan Motivasi
115/232
0
20
40
60
80
100
1 2 3 4 5 6 7 8 9 10 11
Place
dBA
LEQ (dBA)
Status of equivalent noise at different locations in the Wong EnStatus of equivalent noise at different locations in the Wong Engineeringgineering
NO. OF PLACE NAME OF PLACE MAXIMUM
(dBA)
LEQ (dBA)
1 Turret Bending Section 86.8 83,2
2 Turret Punching Section (Cell A) 95 1 87 1
8/8/2019 Himpunan Motivasi
116/232
2 Turret Punching Section (Cell A) 95.1 87,1
3 Turret Punching Section (Cell B) 85.0 82,2
4 Low Stamping Section 84.6 82
5 Medium Stamping Section (Cell A) 95.4 84,1
6 Medium Stamping Section (Cell B) 90.4 81,3
7 Heavy Stamping Section 98.5 86,6
8 Multi Spindle Section ( Cell A) 88.1 82
9 Multi Spindle Section (Cell B) 78.9 78
10 Escomatic Section 89.3 86,2
11 CNC-1 Section (Cell A) 87.7 83,6
12 CNC-1 Section (Cell B) 89.1 82,3
13 CNC-2 Section 87.7 81,3
Graphical comparison of noise levels at different locations at WGraphical comparison of noise levels at different locations at Wongong
EngineeringEngineering
120Maximum (dBA)
LEQ (dBA)
8/8/2019 Himpunan Motivasi
117/232
0
20
40
60
80
100
1 2 3 4 5 6 7 8 9 10 11 12 13
Place
dBA
LEQ (dBA)
Status of equivalent noise at different locations in the NSTP PrStatus of equivalent noise at different locations in the NSTP Printinginting
NO. OF
PLACE
NAME OF PLACE MAXIMUM
(dBA)
LEQ
(dBA)
8/8/2019 Himpunan Motivasi
118/232
1 Pre-press Section
95.2 80,1
2 Press Section96.1 93,7
3 Reel Stand Section79.0 77,1
4 Mail (Packaging) Section89.3 80,3
Graphical comparison of noise levels at different locations at NGraphical comparison of noise levels at different locations at NSTP PrintingSTP Printing
120
8/8/2019 Himpunan Motivasi
119/232
0
20
40
60
80
100
1 2 3 4
Place
dBA Maximum (dBA)
LEQ (dBA)
Study of the effects of noise onStudy of the effects of noise on
8/8/2019 Himpunan Motivasi
120/232
Study of the effects of noise onStudy of the effects of noise on
industrial workers in Harvikindustrial workers in HarvikRubber, Wong Engineering andRubber, Wong Engineering and
NSTP Printing PlantNSTP Printing Plant
Physiological Effects on the industrial workers in each sitePhysiological Effects on the industrial workers in each site
Physiological Effect /
Noise
Presence of Effect
in (%)
No Effect
in (%)
No Response
in (%)
Harvik Rubber 27 54 19
Wong Engineering 25 70 5
8/8/2019 Himpunan Motivasi
121/232
Wong Engineering 25 70 5
NSTP Printing 30 56 14
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Harvik
Rubber
Wong
Engineering
NSTP
Printing PlantPlace
Percentage(%
No response
No effect
Presence of effect
Hearing Loss Effects on the industrial workers in each siteHearing Loss Effects on the industrial workers in each site
Hearing Loss Effect /
Noise
Presence of Effect
in (%)
No Effect
in (%)
No Response
in (%)
Harvik Rubber 43 45 12
Wong Engineering 32 64 4
8/8/2019 Himpunan Motivasi
122/232
Wong Engineering 32 64 4
NSTP Printing 40 51 9
0%
10%
20%30%
40%
50%
60%
70%80%
90%
100%
Harvik
Rubber
Wong
Engineering
NSTP
Printing PlantPlace
Percentage(
No responseNo effect
Presence of effect
Auditory Effects on the industrial workers in each siteAuditory Effects on the industrial workers in each site
Auditory Effect / NoisePresence of Effect
in (%)
No Effect
in (%)
No Response
in (%)
Harvik Rubber 81 17 2
Wong Engineering 66 29 5
8/8/2019 Himpunan Motivasi
123/232
g g g
NSTP Printing 70 19 11
0%
10%
20%30%
40%
50%
60%
70%
80%
90%
100%
Harvik
Rubber
Wong
Engineering
NSTP
Printing Plant
Place
Percentage(%
No response
No effect
Presence of effect
Psychological Effects on the industrial workers in each sitePsychological Effects on the industrial workers in each site
Psychological Effect /
Noise
Presence of Effect in
(%)
No Effect
in (%)No Response in (%)
Harvik Rubber 52 35 13
Wong Engineering 51 41 8
8/8/2019 Himpunan Motivasi
124/232
g g g
NSTP Printing 53 38 9
0%
10%
20%30%
40%
50%
60%
70%80%
90%
100%
Harvik
Rubber
Wong
Engineering
NSTP
Printing Plant
Place
P
ercentage(%
No response
No effect
Presence of effect
Sleep Disturbances Effects on the industrial workers in each sitSleep Disturbances Effects on the industrial workers in each sitee
Sleep Disturbances /
Noise
Presence of
Disturbances
in (%)
No Disturbances
Effect
in (%)
No Response
in (%)
Harvik Rubber 35 56 9
Wong Engineering 55 38 7
8/8/2019 Himpunan Motivasi
125/232
Wong Engineering 55 38 7
NSTP Printing 40 53 7
0%
10%
20%30%
40%
50%
60%
70%80%
90%
100%
Harvik Rubber Wong
Engineering
NSTP Printing
Plant
Place
Percentage(
No response
No effect
Presence of effect
Study of hearing protectionStudy of hearing protectionequipments that have beenequipments that have been
8/8/2019 Himpunan Motivasi
126/232
equipments that have beenequipments that have been
provided by the managementprovided by the managementto the employees as one of theto the employees as one of the
way to reduce noise effect onway to reduce noise effect onindustrial workerindustrial worker
An opinion of workers regarding to the Hearing Protection EquipmAn opinion of workers regarding to the Hearing Protection Equipment thatent thathave been provided by management to themhave been provided by management to them
Protection Of Hearing
/ Noise
Presence of Protection
in (%)
No Protection
in (%)
No Response
in (%)
Harvik Rubber 94 5 1
8/8/2019 Himpunan Motivasi
127/232
Wong Engineering 84 13 3
NSTP Regional
Printing Plant 93 4 3
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
Harvik Rubber Wong
Engineering
NSTP Printing
Plant
Place
Per
centage(
No response
No protection
Presence of protection
Statistica l Analysis Of The Data Ob tainedStatistical Analysis Of The Data Ob tained
The most common type of test used to carry out bivariate analysiThe most common type of test used to carry out bivariate analysis ins in
practice is Chipractice is Chi--square test.square test.
The ChiThe Chi--square test may tell us that whether the two variables aresquare test may tell us that whether the two variables are
8/8/2019 Himpunan Motivasi
128/232
dependent or independent.dependent or independent.
However, it does not tell anything about the nature of relationsHowever, it does not tell anything about the nature of relationshiphip
between the two variablesbetween the two variables..
Generally, the null hypothesis for overall ChiGenerally, the null hypothesis for overall Chi--square test is that the twosquare test is that the two
variables are independent of each other.variables are independent of each other.
The alternative hypothesis is that they are not independent, thaThe alternative hypothesis is that they are not independent, that is,t is,there is a relationship between the two variables.there is a relationship between the two variables.
In the present case the one variable was represented by the kindIn the present case the one variable was represented by the kind ofofindustrial environment or site while the second variable indicatindustrial environment or site while the second variable indicates thees the
presence or absence of effect on the industrial workers.presence or absence of effect on the industrial workers.
The observed (O) and expected (E) frequency values were calculatThe observed (O) and expected (E) frequency values were calculated.ed.
8/8/2019 Himpunan Motivasi
129/232
The null hypothesis so formed was tested at a confidence level oThe null hypothesis so formed was tested at a confidence level off
90%(90%( = 0.1) and 95% (= 0.1) and 95% ( = 0.05) and accuracy= 0.05) and accuracy 5% Chi5% Chi--square valuesquare value
was calculated from (Owas calculated from (O--E)2 / E.E)2 / E.
Expected value was calculated by using probability.Expected value was calculated by using probability.
When observed value would significantly greater than the expecteWhen observed value would significantly greater than the expectedd
value a relationship is said to exist between two variables othevalue a relationship is said to exist between two variables otherwise therwise the
relationship does not exists.relationship does not exists.
Data Analysis for the Physiological EffectsData Analysis for the Physiological Effects
Computation of Test Statistic of Physiological Effec ts
( )E
EO2
Place Responds O E
P f ff t 172 173 33 0 01
8/8/2019 Himpunan Motivasi
130/232
Presence of effect 172 173.33 0.01
No effect 343 384.00 4.38
Cannot say 125 82.67 21.67
Presence of effect 157 173.33 1.54
No effect 449 384.00 11.00
Cannot say 34 82.67 28.65
Presence of effect 191 173.33 1.80
No effect 360 384.00 1.50
Cannot say 89 82.67 0.48
Total 71.03
NSTP Printing
Wong Engineering
Harvik Rubber
Discussion and conclusion
FromFrom ChiChi--Square Distribution Table,Square Distribution Table, level of significance,level of significance, = 0.1 and= 0.1 andthe degree of freedom (df) = 4, the critical value obtained isthe degree of freedom (df) = 4, the critical value obtained is
Since the computed test statistics has exSince the computed test statistics has exceeded theceeded the
iti l lcritical value or:
77944.71.02 =
03.712=
8/8/2019 Himpunan Motivasi
131/232
critical value or:critical value or:
So, the null hypothesis is rejected.So, the null hypothesis is rejected.
IIf we take level of significance, = 0.05 and the degree of freedom(df) =4, the critical value obtained isthe critical value obtained is
Since the computed test statistic hasSince the computed test statistic has exceeded theexceeded the
critical value or :critical value or :
So, the null hypothesis is rejected too.So, the null hypothesis is rejected too.
This meant that at level of significanceThis meant that at level of significance = 0.1 and= 0.1 and = 0.05,= 0.05,Physiological Effects of noise on industrial workers are dependePhysiological Effects of noise on industrial workers are dependent onnt on
type of industrytype of industry
1.022
>
48773.905.02
=
03.712=
05.022
>
Data Analysis for the Hearing Loss EffectsData Analysis for the Hearing Loss Effects
Computa tion of Test Statistic of Hearing Loss Effec ts
( )E
EO2
Place Responds O E
8/8/2019 Himpunan Motivasi
132/232
Presence of effect 68 61.00 0.80
No effect 73 86.00 1.97
Cannot say 19 13.00 2.77
Presence of effect 51 61.00 1.64
No effect 103 86.00 3.36
Cannot say 6 13.00 3.77
Presence of effect 64 61.00 0.15
No effect 82 86.00 0.19Cannot say 14 13.00 0.08
Total 14.73
NSTP Printing
Wong Engineering
Harvik Rubber
Discussion and conclusion
FromFrom ChiChi--Square Distribution Table,Square Distribution Table, level of significance,level of significance, = 0.1 and= 0.1 andthe degree of freedom (df) = 4, the critical value obtained isthe degree of freedom (df) = 4, the critical value obtained is
Since the computed test statistics has exSince the computed test statistics has exceeded theceeded the
critical value or:critical value or:
77944.71.02 =
73.142=
8/8/2019 Himpunan Motivasi
133/232
critical value or:critical value or:
So, the null hypothesis is rejected.So, the null hypothesis is rejected.
IIf we take level of significance, = 0.05 and the degree of freedom(df) =4, the critical value obtained isthe critical value obtained is
Since the computed test statistic hasSince the computed test statistic has exceeded theexceeded the
critical value or :critical value or :
So, the null hypothesis is rejected too.So, the null hypothesis is rejected too.
This meant that at level of significanceThis meant that at level of significance = 0.1 and= 0.1 and = 0.05, Hearing= 0.05, HearingLoss Effects of noise on industrial workers are dependent on typLoss Effects of noise on industrial workers are dependent on type ofe of
industryindustry
1.022
>
48773.905.02
=
05.022
>
73.142=
Data Analysis for the Auditory EffectsData Analysis for the Auditory Effects
Computation of Test Statistic of Aud itory Effec ts
( )E
EO2
Place Responds O E
8/8/2019 Himpunan Motivasi
134/232
Presence of effect 65 58.00 0.85
No effect 13 17.00 0.94
Cannot say 2 5.00 1.80
Presence of effect 53 58.00 0.43
No effect 23 17.00 2.12
Cannot say 4 5.00 0.20
Presence of effect 56 58.00 0.07
No effect 15 17.00 0.24
Cannot say 9 5.00 3.2
Total 9.85
NSTP Printing
Wong Engineering
Harvik Rubber
Discussion and conclusion
FromFrom ChiChi--Square Distribution Table,Square Distribution Table, level of significance,level of significance, = 0.1 and= 0.1 andthe degree of freedom (df) = 4, the critical value obtained isthe degree of freedom (df) = 4, the critical value obtained is
Since the computed test statistics has exSince the computed test statistics has exceeded theceeded the
critical value or:critical value or:
77944.71.02 =
22
85.92=
8/8/2019 Himpunan Motivasi
135/232
critical value or:critical value or:
So, the null hypothesis is rejected.So, the null hypothesis is rejected.
IIf we take level of significance, = 0.05 and the degree of freedom(df) =4, the critical value obtained isthe critical value obtained is
Since the computed test statistic hasSince the computed test statistic has exceeded theexceeded the
critical value or :critical value or :
So, the null hypothesis is rejected too.So, the null hypothesis is rejected too.
This meant that at level of significanceThis meant that at level of significance = 0.1 and= 0.1 and = 0.05, Auditory= 0.05, AuditoryEffects of noise on industrial workers are dependent on type ofEffects of noise on industrial workers are dependent on type of industryindustry
1.022
>
48773.905.02
=
05.022
>
85.92=
Data Analysis for the Psychological EffectsData Analysis for the Psychological Effects
Computation of Test Statistic of Psycholog ical Effec ts
( )E
EO2
Place Responds O E
8/8/2019 Himpunan Motivasi
136/232
Presence of effect 251 249.33 0.01
No effect 167 182.00 1.24
Cannot say 62 48.67 3.65
Presence of effect 245 249.33 0.08
No effect 196 182.00 1.08
Cannot say 39 48.67 1.92
Presence of effect 252 249.33 0.03
No effect 183 182.00 0.01
Cannot say 45 48.67 0.28
Total 8.30
NSTP Printing
Wong Engineering
Harvik Rubber
Discussion and conclusion
FromFrom ChiChi--Square Distribution Table,Square Distribution Table, level of significance,level of significance, = 0.1 and= 0.1 andthe degree of freedom (df) = 4, the critical value obtained isthe degree of freedom (df) = 4, the critical value obtained is
Since the computed test statistics has exSince the computed test statistics has exceeded theceeded the
critical value or:critical value or:
77944.71.02 =
22
30.82=
8/8/2019 Himpunan Motivasi
137/232
critical value or:critical value or:
So, the null hypothesis is rejected.So, the null hypothesis is rejected.
IIf we take level of significance, = 0.05 and the degree of freedom(df) =4, the critical value obtained isthe critical value obtained is
Since the computed test statistic hasSince the computed test statistic has not exceeded thenot exceeded the
critical value or :critical value or :
So, the null hypothesis is accepted.So, the null hypothesis is accepted. This meant that at level of significance = 0.1, Psychological Effects of
noise on industrial workers are dependent on types of industry but at
level of significant = 0.05 the effects are independent.
1.022
>
48773.905.02
=
30.82=
05.022
48773.905.02
=
05.022
>
72.112=
Results of the statistical test in a summarized form with refereResults of the statistical test in a summarized form with reference tonce to
the five effects of interest.the five effects of interest.
Relationship between the type of effectat different propose sites
No. Type of Effect
8/8/2019 Himpunan Motivasi
140/232
= 0.1 = 0.05
1 Physiological Effects Significant Significant
2 Hearing Loss Effects Significant Significant
3 Auditory Effects Significant Significant
4 Psychological Effects Significant Not Significant
5 Sleep Disturbances Effects Significant Significant
CONCLUSIONCONCLUSION
1.1. The highest extent of noise in term of maximum level of noise atThe highest extent of noise in term of maximum level of noise at
designed area in each different site was can be drawn as below:designed area in each different site was can be drawn as below:a)a) Harvik RubberHarvik Rubber -- 96.7 dBA at Assembly section96.7 dBA at Assembly section
b)b) Wong EngineeringWong Engineering98.5 dBA at Heavy Stamping section98.5 dBA at Heavy Stamping section
8/8/2019 Himpunan Motivasi
141/232
c)c) NSTP PrintingNSTP Printing96.1 dBA at Press section96.1 dBA at Press section
2.2. On the effects of noise, the percentage of industrial workers afOn the effects of noise, the percentage of industrial workers affectedfected
physiologically, psychologically, feeling regarding the noise lephysiologically, psychologically, feeling regarding the noise level onvel on
hearing ability (hearing loss effects), have a sleep disturbancehearing ability (hearing loss effects), have a sleep disturbances ands and
auditory problem when they worked in the industrial areas. Theauditory problem when they worked in the industrial areas. Thestatistical analysis indicates that there is a relationship.statistical analysis indicates that there is a relationship.
3.3. SuggestionSuggestion--It can be seen that all the effects reduces the noise level toIt can be seen that all the effects reduces the noise level to
a safe limit.a safe limit.
4.4. Then all workers should given hearing protection equipments andThen all workers should given hearing protection equipments and itit
should be made compulsory by management to wear hearingshould be made compulsory by management to wear hearing
protection equipment when dealing with task in noisy environmentprotection equipment when dealing with task in noisy environment..
8/8/2019 Himpunan Motivasi
142/232
THANK YOUTHANK YOU....
FOR YOUR ATTENTIONFOR YOUR ATTENTION
ANALYSIS OF WIRE SWEEPDURING MOLD ENCAPSULATION
8/8/2019 Himpunan Motivasi
143/232
DURING MOLD ENCAPSULATIONOF SEMICONDUCTOR DEVICE
USING DESIGN OF EXPERIMENT
NORAINI MOHD RAZALI
UKM
THESIS OUTLINE
Introduction
Literature review
8/8/2019 Himpunan Motivasi
144/232
Literature review
Methodology
Result & discussion
Conclusion & recommendation
8/8/2019 Himpunan Motivasi
145/232
INTRODUCTION
OBJECTIVE OF THE STUDY
To study the relationship between moldingprocess parameters and wire sweep in
8/8/2019 Himpunan Motivasi
146/232
process parameters and wire sweep in
mold encapsulation process, in order toreduce or eliminate wire short arising from
processing and therefore avoiding scrapand customer return
Problem background
Wire sweep is a swaying or movement of thewires during molding (encapsulation process)along the direction of mold flow, which may
8/8/2019 Himpunan Motivasi
147/232
D
Mold flow direction
Lead
frame
Die
Wire
g , y
result in broken or wire shorting.
The level of wire sweep is measured by thedistance of sweep D, where D is equal or
greater than 3 wire diameter
Minimizing wire sweep typically involvesmaking changes to the formulation of the
mold compound, the process parameters andthe mold design. Hence, understanding theeffects of these factors on wire sweep iscrucial to ensure the processability and high
yield.
Factor affecting wire sweep
Primary Factors Secondary Factors
8/8/2019 Himpunan Motivasi
148/232
Primary Factors Secondary Factors
Device geometry
Wire bonding
Mold design
Molding compound
Molding condition
Lead frame design
Bond pad pitch, pad layout (in line vs. staggered)
Wire length, diameter, strength, and loop shape
Gate design, runner design, cavity position
Spiral flow, viscosity, moisture preconditioning
Preheat, transfer pressure, transfer speed, mold
temperature
Lead finger (stamped vs. etched), lead finger pitch,
die pad configuration (size, holes, anchors)
8/8/2019 Himpunan Motivasi
149/232
The thesis is focused on the wire sweepcaused by molding condition which is
much related to the process parameteroptimization during encapsulation process
Overview of semiconductor process
Wafer saw
Die attach
Wafer saw
Die attach
8/8/2019 Himpunan Motivasi
150/232
Wire bonding
Encapsulation
Solder plating
Lead forming
Marking &testing
Test & Inspection
Packing
Test & Inspection
Test & Inspection
Wire bonding
Encapsulation
Solder plating
Lead forming
Marking &
Test & Inspection
Packing
Test & Inspection
Test & Inspection
Transfer molding machine
Basic mold holder
(U )
Transfer cylinder
Basic mold holder
(U )
Transfer cylinder
8/8/2019 Himpunan Motivasi
151/232
Platen
Lower basic
mold
Upper basic
moldUpper mold
Basic mold holder
(Lower)
(Upper)
Clamp
cylinderEjector
cylinder
Lower moldLead frame with
device attached
Platen
Lower basic
mold
Upper basic
moldUpper mold
Basic mold holder
(Lower)
(Upper)
Clamp
cylinderEjector
cylinder
Lower moldLead frame with
device attached
Pel le t Tray
Pick up arm
Pellet
Pel let
Tray
Table
Pellet
Sensor
Plunger
Upper Bas ic Mold
Lower Bas ic Mold
Upper Mold
Lower Mold
Lead f rame
Pel le t Tray
Pick up arm
Pellet
Pel let
Tray
Table
Pellet
Sensor
Plunger
Upper Bas ic Mold
Lower Bas ic Mold
Upper Mold
Lower Mold
Lead f rame
FRONT VIEW SIDE VIEW
MOLDSET UPPER & LOWER(96 CAVITY)
Mold process flow
8/8/2019 Himpunan Motivasi
152/232
Step 1: Open mold
Step 2: Closed mold Step 3: Placement of pellet
Step 4: Transfer-engaging plunger Step 5: Transfer-filling the runners Step 6: Transfer-Filling the mold cavities
Step 7: Open mold after mold compound cure Step 8: Separating packages from runners & cull
Overview of mold compound (pellet)composition & properties
8/8/2019 Himpunan Motivasi
153/232
Catalyst0%
Hardener12%
Epoxy resin
11%
Release agent,
coloring,
coupling agent
1%
Flame retardant
3%
Stress relief
additive
2%
Other
1%
Silica filler
70%
Effects of filler compound
Increase thermal conductivity; Thermal conductivity is higher thanresinous matrix.
Decrease the coefficient of thermal expansion; Thermalexpansion is less than resinous matrix
8/8/2019 Himpunan Motivasi
154/232
expansion is less than resinous matrix.
Increase both the mechanical strength and modulus; Mechanicalstrength and modulus are higher than resinous matrix.
Decrease water absorption and diffusion coefficient; Water is onlyabsorbed on the silica surface. As a result, diffusion of water
through the filler is blocked entirely. Increase melts viscosity; Viscosity is the most important limit on
amount of filler that can be added. Increase the rate of wear on the cavity surface. Increase alpha particle emission; naturally occurring silica is the
only significant source of thorium and uranium that are in turn thesources of alpha particles.
Usually decrease the cost of the composite.
8/8/2019 Himpunan Motivasi
155/232
LITERATURE REVIEW
Previous study on wire sweep
Nguyen and Lim (1990) in diode IC studying wire sweep problemunder different model, ratio of cavity/height of lead frame and wireproperties.
Han and Wang (1995) investigated the wire sweep problem - used
8/8/2019 Himpunan Motivasi
156/232
g ( ) g p p
2D numerical model to simulate the flow to calculate drag force. Chai and Zohar (1999) used 160L QFP to study the influence of
viscosity, the quantity of wire and height of cavity on wire sweep. Chen (1997) used shape factor to analyze wire sweep analysis.
T. Yoshida & A.Tanaka from Nitto Denko Corp. (1996) study thewire sweep caused by the mechanism of die pad tilting whichnormally used to be said physical phenomenon like unbalancedencapsulant flow at top and bottom portion of die pad that drivesdifferent pressure gap at each portion
Rauhut (1997) from Dexter Corp. study the wire sweep control withmold compound formulation. His study aims at providing a betterunderstanding of the relationship between mold compoundformulations and wire sweep.
Mold process condition
Successful optimization depends largely on
adjustment of five key conditions or properties of
8/8/2019 Himpunan Motivasi
157/232
the molding compound during the process.These properties are;
Temperature
Velocity during transfer
Viscosity in the cavity
Pressure during cure in the cavity and The extent of the cure reaction.
Thermosetting characteristic
Most thermosetting molding compounds will crosslink over a widerange of temperatures
In order to be able to transfer the mold compound into the moldcavities, it has to be in the liquid low viscosity state.
8/8/2019 Himpunan Motivasi
158/232
The higher the temperature the faster the mold compound cures,and therefore the gel time and the time for transfer will decrease.
Influence of temperature on time-viscosity curve (bath tub curve)
Thermosetting characteristic
Most molding compounds are granular atroom temperature.
8/8/2019 Himpunan Motivasi
159/232
When exposed to heat, the granules meltand the compound becomes fluid.
Under continued heat cross-linking occursand the material solidifies.
As the material goes from solid to fluid to
solid, its viscosity changes in a mannerindicated by bath tub curve.
8/8/2019 Himpunan Motivasi
160/232
METHODOLOGY
Full Factorial Experiment2N
Full factorial experiment at two levels, designated N refers to the factors or variables whose level settings are
felt by the experimenter to have a significant influence onprocess output.
2N
8/8/2019 Himpunan Motivasi
161/232
2 refers to the fact that each factor will be tested at twolevels, a high (+) and a low (-) setting. The word full means that all possible combinations of levels
for all factors will be run in the experiment, and the datagenerated will be used in analyzing experimental results.
As the number of factors in a factorial experiment grows, thenumber of effects that can be estimated also grows, whereevery possible combination can occur:
4
5
10
2 16 treatment combinations2 32 treatment combinations
2 1024 treatment combinations
Experimental frame work
A brainstorming session was held to identify allpossible factors that could be studied asindependent variables.
8/8/2019 Himpunan Motivasi
162/232
p
Four major factors were selected from a broaderrange of experiences.
The four factors were1) Mold temperature
2) Transfer pressure
3) Transfer speed3) Pellet Breaking point.
Factors and levels used in the DOEfor wire sweep analysis
LevelParameter
8/8/2019 Himpunan Motivasi
163/232
Parameter-1 +1
Mold temperature (C)
Transfer pressure (bar)
Transfer speed (mm/s)
Pellet breaking Point (mm)
200
100
3
5.5
212
180
7
7.5
Original setting of mold parameter
Parameter Original setting
8/8/2019 Himpunan Motivasi
164/232
Mold temperature (A)
Transfer pressure (B)
Transfer speed (C)
Pellet breaking point (D)
212C
150 bar
5 mm/s
6.8 mm
Experimental design for wire sweepoptimization by listing all possible -/+combinations.
Run PatternMold
Temperature (A)
Transfer
Pressure (B)
Transfer Speed
(C)
Pellet breaking
Point (D)
1 ---- -1 -1 -1 -1
2 ---+ -1 -1 -1 1
8/8/2019 Himpunan Motivasi
165/232
3 --+- -1 -1 1 -1
4 --++ -1 -1 1 1
5 -+-- -1 1 -1 -1
6 -+-+ -1 1 -1 1
7 -++- -1 1 1 -1
8 -+++ -1 1 1 1
9 +--- 1 -1 -1 -1
10 +--+ 1 -1 -1 1
11 +-+- 1 -1 1 -1
12+-++
1 -1 1 113 ++-- 1 1 -1 -1
14 ++-+ 1 1 -1 1
15 +++- 1 1 1 -1
16 ++++ 1 1 1 1
Sample size
In determining sample size, the cost and time requiredmust be c
Recommended