View
383
Download
22
Category
Preview:
Citation preview
8/2/2019 Huawei 3900 Bts Structure
1/49
HUAWEI TECHNOLOGIES CO., LTD. All rights reserved
www.huawei.com
Internal
HUAWEI BTS3036
System Structure
ISSUE 1.0
8/2/2019 Huawei 3900 Bts Structure
2/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 2
Upon completion of this course, you will be able to:
Know the functions and features of BTS3036
Master the BTS3036 hardware structure
Master the cable connection of BTS3036
8/2/2019 Huawei 3900 Bts Structure
3/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 3
References
BTS3036 Product description
BTS3036 Installation Manual
BTS3036 Hardware description
8/2/2019 Huawei 3900 Bts Structure
4/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 4
Chapter 1 Overview
Chapter 2 System Components
Chapter 3 Typical configuration
8/2/2019 Huawei 3900 Bts Structure
5/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 5
Features and Functions 1
It shares the BBU, which is the central processing unit, with the
BTS3036 to minimize the number of spare parts and reduce the cost.
It can be flexibly installed in a small footprint and can be easily
maintained
It supports multiple frequency bands, such as PGSM900, EGSM900,
and DCS1800
8/2/2019 Huawei 3900 Bts Structure
6/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 6
Features and Functions 2 It supports the GPRS
It supports multiple network topologies, such as star, tree, chain, ring,
and hybrid topologies
It supports the cell broadcast SMS and point-to-point SMS.
A single cabinet supports up to 12 carriers in the maximum cell
configuration of S4/4/4.
8/2/2019 Huawei 3900 Bts Structure
7/49HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 7
Chapter 1 Overview
Chapter 2 System Components
Chapter 3 Signal Processing
Chapter 4 Typical configuration
8/2/2019 Huawei 3900 Bts Structure
8/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 8
System Architecture of BTS3036
BTS3036 system
8/2/2019 Huawei 3900 Bts Structure
9/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 9
Appearance of the BTS3036 Cabinet
ConfigurationType
Width(mm)
Depth(mm)
Height(mm)
Cabinet 600 450 900
BTS3036 cabinet
Configuration Type Weight (kg)
Empty cabinet 57
Full Configuration 142
8/2/2019 Huawei 3900 Bts Structure
10/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 10
Structure of the BTS3036 Cabinet(-48V)
Fully configured BTS3036 Single cabinet
(1) Double radio filter
unit
(2) Fan box
(3) Baseband unit (4) Direct current
distribution unit
(6) Cable in/out unit
-
8/2/2019 Huawei 3900 Bts Structure
11/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 11
BTS3036 Cabinet and Boards
Board/Module Full NameBSBC(BBU) Universal BBU Subrack Backplane type C (2U)
UEIU Universal Environment Interface Unit
GTMU GSM Transmission and Management Unit for the BBU
UELP Universal E1/T1 Lightning Protection Unit
UBFA Universal BBU Fan unit type A (2U)
UPEU Universal Power and Environment interface Unit
DRFU Double Radio Filter Unit
DCDU Direct Current Distribution Unit
GATM GSM Antenna and TMA Control Module
Fan box Fan box
8/2/2019 Huawei 3900 Bts Structure
12/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 12
Logical Structure of the BTS3036
8/2/2019 Huawei 3900 Bts Structure
13/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 13
Common Subsystem
(1) BBU Control subsystem whose functions are implemented by
the BBU
(2) DRFU RF subsystem whose functions are implemented by the
DRFU
(3) DCDU Power subsystem
(4) Fan Box
8/2/2019 Huawei 3900 Bts Structure
14/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 14
1.1 Functions of BBU
Provides physical ports between the BTS and the BSC forinteraction
Provides the CPRI ports for communication with the DRFU
Provides the USB port for downloading the BTS software
Provides OM channels for connection to the LMT (or M2000)
Processes UL and DL data
Provides centralized management on the entire BTS system,
such as OM and signaling processing
Provides the reference clock for the entire system
8/2/2019 Huawei 3900 Bts Structure
15/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 15
1.2 Appearance and Panel of the BBU
1. BBU
2. Panel of the BBU
Dimensions(mm):44231086.1(2U)Weight:12KgPower Type:-48V DC
8/2/2019 Huawei 3900 Bts Structure
16/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 16
1.3 Logical Structure of the BBU3036
8/2/2019 Huawei 3900 Bts Structure
17/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 17
1.4.1 Ports of the BBU3036
Power port
Port Type Location Description
PWR 7W2 connector 1.4.2.7.3 UPEU
Module
-48 V power input
8/2/2019 Huawei 3900 Bts Structure
18/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 18
1.4.2 Ports of the BBU3036
Transmission ports 1
Port Type Location Description
INSIDEDB25 male
connectorUELP
board
Transfers the four E1/T1 signals between the
UELP and the GTMU.
OUTSIDE DB26 maleconnector
Provides the input and output of the fourE1/T1 signals between the BBU and the BSC.
8/2/2019 Huawei 3900 Bts Structure
19/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 19
1.4.3 Ports of the BBU3036
Transmission ports 2Port Type Location Description
CPRI0
CPRI5
SFP
connector
GTMU
board
Provides the input and output of the optical and
electrical transmission signals between the BBU and
the RF module.
E1/T1 DB26 maleconnector
Provides the input and output of the four E1/T1signals between the GTMU and the UELP or
between the GTMU and the BSC.
FE0 RJ45
connector
A reserved port that performs the following function:
Connects the BBU to a routing device in the
equipment room through the Ethernet cable to
transmit network information.
FE1 DLC
connector
A reserved port that performs the following function:
Connects the BBU to a routing device in the
equipment room through the optical cable to transmit
network information.
8/2/2019 Huawei 3900 Bts Structure
20/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 20
1.4.4 Ports of the BBU3036
Alarm ports
Name Type Location Description
MON0 RJ45
connector
1.4.2.7.3 UPEU
Module and
1.4.2.7.4 UEIU
Board
Provides the input and output of the
externally collected environment
monitoring signals to the GTMU according
to the RS485 communications protocol.
MON1 RJ45
connector
Reserved
EXT-
ALM0
RJ45
connector
Transmits the externally collected
environment monitoring signals to the
GTMU through communication protocols
related to the dry contact.
EXT-
ALM1
RJ45
connector
Reserved
8/2/2019 Huawei 3900 Bts Structure
21/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 21
1.4.5 Ports of the BBU3036
Other ports of the BBU
Port Type Location Description
ETH RJ45
connec
tor
1.4.2.7.5
GTMU Board
For local maintenance and commissioning
USB USB
connec
tor
A reserved port that performs the following
function:
Automatically upgrades the software through
the USB disk.
TST USB
connec
tor
For testing of the output clock signals by using
a tester
8/2/2019 Huawei 3900 Bts Structure
22/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 22
1.4.6 BBU3036 Boards and Modules
The BBU3036 boards consist of the following:
(1) BSBC Board
(2) UEIU Board
(3) GTMU Board(4) UELP Board
the BBU3036 modules consist of the following:
(5) UBFA Modules
(6) UPEU Modules
8/2/2019 Huawei 3900 Bts Structure
23/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 23
1.4.6.1 Functions of BSBC Board
Clock signal: The BSBC sends the precise clock signals provided by theGTMU to each service processing module as reference clock.
Power input: The BSBC distributes the +12 V DC power input provided by
the power module to the boards and modules.
Low-speed signal management: The BSBC provides the interface for theGTMU to monitor and manage the service board, power, backplane, and
fan.
High-speed signal management: The BSBC distributes and converges
information about data, control, and management of all boards in the
baseband unit system
Service signal: The BSBC transfers the UL and DL baseband data of the
GTMU.
8/2/2019 Huawei 3900 Bts Structure
24/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 24
1.4.6.1 Slots of BSBC Board
The BSBC is the backplane of the BBU. The BSBC provides eightboard slots, two power slots, and one fan slot.
8/2/2019 Huawei 3900 Bts Structure
25/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 25
1.4.6.2 Functions of UBFA Module
Fan control board
(1) Processes the two-channel 12 V power input by the
backplane to provide power for the fan
(2) Communicates with the GTMU to control and monitor
the fan
(3) Detects and adjusts the fan speed
(4) Detects the board temperature by the built-in
temperature sensor
(5)Provides the automatic reset function
Fan: performs forced heat dissipation for the entire BBU
8/2/2019 Huawei 3900 Bts Structure
26/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 26
1.4.6.2 LEDs onUBFA Module
LED Color Status Description
STATE Green Blinking twice
per second
The board is not securely connected. An
alarm is not generated.
Red On An alarm is generated.
Green Blinking once
every two
seconds
The board operates normally.
8/2/2019 Huawei 3900 Bts Structure
27/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 27
1.4.6.3 Functions of UPEU Modul
Supplies power to the boards, modules, and fans
Introduces environment monitoring signals to the BBU
Reports fault signals, in-position signals, and version
information associated with the boards and modules
Structure and working principles of the UPEU
8/2/2019 Huawei 3900 Bts Structure
28/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 28
1.4.6.3 Ports on UPEU panel
Port Type DescriptionMON0 RJ45
Connector
Provides the input and output of the externally collected environment
monitoring signals to the GTMU
MON1 RJ45
Connector
Reserved
EXT-
ALM0
RJ45
Connector
Transmits the externally collected environment monitoring signals to the
GTMU through communication protocols related to the dry contact.
EXT-
ALM1
RJ45
Connector
Reserved
PWR 7W2
connector
-48V power input
8/2/2019 Huawei 3900 Bts Structure
29/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 29
1.4.6.3 LEDs on UPEU panel
LEDs on the UPEU
LED Color Status Description
RUN Green On The module is functional.
Off The module is not functional.
8/2/2019 Huawei 3900 Bts Structure
30/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 30
1.4.6.4 Function of UEIU Board
The universal environment interface unit (UEIU) supports multiple
environment monitoring signals. The UEIU is optional. It is
configured when the environment interfaces are insufficient.
8/2/2019 Huawei 3900 Bts Structure
31/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 31
1.4.6.4 Ports on UEIU
Port Type DescriptionMON0 RJ45
connector
Provides the input and output of the externally collected environment
monitoring signals to the GTMU according to the RS485
communications protocol
MON1 RJ45
Connector
Reserved
EXT-
ALM0
RJ45
Connector
Transmits the externally collected environment monitoring signals to
the GTMU through communications protocol related to the dry contact
EXT-
ALM1
RJ45
connector
Reserved
8/2/2019 Huawei 3900 Bts Structure
32/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 32
1.6.4.5 Function of GTMU Board
Controls, maintains, and operates the BTS
Supports fault management, configuration management, performance
management, and security management
Supports the monitoring of the fan module and power supply module
Provides port for terminal maintenance
Supports four E1 inputs
Provides CPRI ports for communication with the RF modules
8/2/2019 Huawei 3900 Bts Structure
33/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 33
1.4.6.5 Ports on GTMU Board
Port Type Description
CPRI0
CPRI5
SFP
connector
Provides the input and output of optical and electrical transmission
signals
ETH RJ45
connector
Local maintenance and commissioning
FE0 RJ45
connector
A reserved port that performs the following function:
Connects the BBU to a routing device in the equipment room through
the
Ethernet cable to transmit network information
8/2/2019 Huawei 3900 Bts Structure
34/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 34
1.4.6.5 Ports on GTMU Board
Port Type Description
FE1 DLC
connector
A reserved port that performs the following function:
Connects the BBU to a routing device in the equipment room
through the optical cable to transmit network information
USB USB
Connector
A reserved port that performs the following function:
Automatically upgrades the software through the USB disk
TST USB
connector
Testing of the output clock signals by using a tester
E1/T1 DB26
male
connector
Provides the input and output of the four E1/T1 signals between the
GTMU and the UELP or between the GTMU and the BSC.
8/2/2019 Huawei 3900 Bts Structure
35/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 35
1.4.6.5 LEDs on GTMU Board
LED Color Status Description
RUN Green On The board is faulty.
Off There is no power supply or the board is faulty.
Blinking once
every two seconds
The board is operational.
Blinking once
every four seconds
The OML link is abnormal.
Blinking four times
per second
The board is loading software.
ALM Red On A fault occurs in the running board.
Off An alarm is not generated.
ACT Green On The board is operational.
Off The board is faulty.
8/2/2019 Huawei 3900 Bts Structure
36/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 36
1.4.6.5 LEDs on GTMU Board
LED Color Status Description
LIU0
LIU3
Green On A local E1/T1 alarm is generated.
Blinking four
times per second
A remote E1/T1 alarm is generated.
Off This link is not used or the alarm is cleared.
CPRI0
CPRI5
Green On The CPRI link is functional.
Red On The reception of the optical module is
abnormal and an alarm is generated.
8/2/2019 Huawei 3900 Bts Structure
37/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 37
1.4.6.5 DIP Switch of GTMU Board
DIP Switch DIP Status Description
1 2
SW1 ON ON The E1 impedance is set to 75 .
OFF ON The E1 impedance is set to 120 .
ON OFF The T1 impedance is set to 100 .
DIPSwitch
DIP Status Description
1 2 3 4
SW2 ON ON ON ON The E1 cable is grounded.
OFF OFF OFF OFF The E1 cable is not grounded.
8/2/2019 Huawei 3900 Bts Structure
38/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 38
1.4.6.5 DIP Switch of GTMU
DIP Switch DIP Status Description
1 2 3 4
SW4 ON ON ON ON The E1 link can be bypassed.
OFF OFF OFF OFF
DIPSwitch
DIP Status Description
1 2 3 4
SW5 ON ON ON ON
OFF ON ON OFF The E1 link of the Level 1 cascaded BTS can be bypassed.
ON OFF ON OFF The E1 link of the Level 2 cascaded BTS can be bypassed.
OFF OFF ON OFF The E1 link of the Level 3 cascaded BTS can be bypassed.
ON ON OFF OFF The E1 link of the Level 4 cascaded BTS can be bypassed.
OFF ON OFF OFF The E1 link of the Level 5 cascaded BTS can be bypassed.
8/2/2019 Huawei 3900 Bts Structure
39/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 39
2.1 Functions of DRFU It implements the direct frequency conversion technique in the transmit
channel, modulates the baseband signals to GSM RF signals. After filtering,
amplifying, and combining the RF signals, the DRFU sends the signals to
the antenna for transmission. The combining can be performed as required.
It receives RF signals from the antenna and performs down-conversion,
amplification, analog-to-digital conversion, matched filtering, and AutomaticGain Control (AGC). Then, the DRFU transmits the signals to the BBU for
further processing.
It controls power and detects the Voltage Standing Wave Ration (VSWR).
8/2/2019 Huawei 3900 Bts Structure
40/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 40
2.2 Operating Environment of DRFU
8/2/2019 Huawei 3900 Bts Structure
41/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 41
2.3 Functional structure of DRFU
8/2/2019 Huawei 3900 Bts Structure
42/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 42
2.4 DRFU Panel
Specifications of the DRFU
Item Specifications
Dimensions Front panel: 395.2 mm (L)
70.6 mm (W)
Working voltage -48 V power inputPower consumption
(heat consumption)
Maximum power
consumption: 450 W
Weight 12 kg
8/2/2019 Huawei 3900 Bts Structure
43/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 43
2.5 LEDs on DRFU
LED Status MeaningRUN On The power input is normal, but the BBU is faulty.
Off There is no power supply or the module is faulty.
Blinking once
every two seconds
The module is functional.
Blinking fourtimes per second
The module is loading software or is not started.
ALM On A fault alarm is generated.
Off No alarm is generated.
ACT On The module is functional and is correctly
connected to the BBU.
Off The connection with the BBU is not established.
Blinking once
every two seconds
The DRFU is being tested on the Site Maintenance
Terminal.
8/2/2019 Huawei 3900 Bts Structure
44/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 44
2.6 LEDs on DRFU
LED Status MeaningVSWR Off (red) No VSWR alarm is detected.
Blinking once every two
seconds (red)
The VSWR alarm is generated on only the
ANT2 port.
Blinking four times per
second (red)
The VSWR alarms are generated on the ANT1
and ANT2 ports.
On (red) The VSWR alarm is generated on only the
ANT1 port.
CPRI0 On (green) The CPRI link is functional.
On (red) The interface module fails to receive signals.
Blinking once every two
seconds (red)
The CPRI link has a loss-of-lock error.
CPRI1 On (green) The CPRI link is functional.
On (red) The interface module fails to receive signals.
Blinking once every two
seconds (red)
The CPRI link has a loss-of-lock error.
8/2/2019 Huawei 3900 Bts Structure
45/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 45
2.7 Ports on the DRFU panelType Connector Ports Description
Port fortransceiving
RF signals
N female Connector ANT1 Used in connection to the antenna Subsystem
ANT2
CPRI port SFP female connector CPRI0 Used in connection to the BBU, or in
connection to the upper-level cascaded DRFU
CPRI1 Used in connection to the lower-level
cascaded DRFU
Port for
transmitting
RF Signals
between
DRFUs
QMA female
connector
RX1 in Input port for diversity signals in antenna
channel 1
RX1
out
Output port of diversity signals in antenna
channel 1
RX2 in Input port for diversity signals in antennachannel 2
RX2
out
Output port of diversity signals in
antenna channel 2
Power port 7W2 power connector PWR Receives power input
8/2/2019 Huawei 3900 Bts Structure
46/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 46
3.1 Function of DCDU (10 Outputs) The DCDU provides one input and 10 outputs and distributes
the -48 V DC power to the BBU, DRFU, and fan box in the
cabinet.
DCDU (10 outputs)
8/2/2019 Huawei 3900 Bts Structure
47/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 47
3.2 Specification of DCDU(10 Outputs)
Item Specifications
Dimensions Module: 442.0 mm (W) x 42.0 mm (H)
Weight 3kg
Working voltage Normal value -48 V DC
Permissible Range -38.4 V DC to -57 V DC
8/2/2019 Huawei 3900 Bts Structure
48/49
HUAWEI TECHNOLOGIES CO., LTD. All rights Reserved Page 48
3.4 Panel of DCDU (four outputs)
Name Label Description
Power
input
terminal
NEG(-) DCDU low level input terminal
RTN(+) DCDU high level input terminal
Power
output port
SPARE2, SPARE1, BBU,
FAN, and RFU5-RFU0
Power ports supplying the 10 outputs of power
to the BBU, DRFU, GATM, and fan boxPower
switch
SPARE2, SPARE1, BBU,
FAN, and RFU5-RFU0
Power switch controlling the 10 outputs for the
BBU, DRFU, GATM, and fan box
Alarm
output port
SPD ALM Dry contact alarm output port
8/2/2019 Huawei 3900 Bts Structure
49/49
www.huawei.com
Thank You
Recommended