View
231
Download
0
Category
Preview:
Citation preview
ISTEGNUTI MATERIJALI
I OGRADNI SUSTAVI
EXTENDED MATERIALS
AND GUARDRAIL SYSTEMS
3 O TIM Topusko d.d. | About TIM Topusko d.d.
4 Podatci o tvrtci | Company facts
5 Istegnuti metal | Expanded Metals
16 Ograde | Barriers
23 Podupirači | Supporting Columns
25 Rešetkasta gazišta | Lattice Treads
28 Čelični stupovi za žičane ograde i vinogradarstvo
Steel Columns for Wire Barriers and Vineyards
30 Usluge | Services
TIM Topusko d.d. - Tvornica istegnutih metala
d.d. u Topuskom posluje od 1961. godine
pod nazivom TIM –Tvornica istegnutih me-
tala d.o.o. Topusko. Prije Domovinskog rata
zapošljavala je oko 500 djelatnika i bila je
značajan proizvođač za područje domaćeg
i inozemnog tržišta. Nakon “Oluje” 1995.
godine ponovo je pokrenuta proizvodnja i
izvršena privatizacija.
TIM Topusko d.d. je sada samostalna tvor-
nica u okviru društva Signal Sistem
koja zapošljava oko 75 zaposlenika. Obnovljen
je cijeliproizvodni program i pokrenuta
proizvodnjaza strano tržište. Tvornica
je specijalizirana za “program cesta” tj. za
izradu odbojne i zaštitne ograde, portala.
Osnovni proizvod tvornice je istegnuti metal
tj. mreže od istegnutog metala i to od čelika,
aluminija, bakra i slično. Mreže od istegnu-
tog metala koriste se u izradi ograda široke
potrošnje (za ograđivanje vrtova, dvorišta,
stambenih objekata, balkona i sl.), kao i za
izradu industrijskih ograda.
U proizvodnom programu nalaze se i gra-
đevinski podupirači raznih dimenzija koji su
neophodni u svakoj većoj gradnji. Za indu-
strijska postrojenja proizvode se i rešetkasta
gazišta u traženim dimenzijama i oblicima.
Za ograđivanje autocesta proizvode se od-
bojne ograde (jednostrane i dvostrane za
zemljane trase i za objekte kao što su mosto-
vi, nadvožnjaci i slično), pješačke i zaštitne
ograde na objektima i montažno-pokretne
ograde za privremeno ograđivanje.
U ponudi se mogu naći i čelični stupovi za
žičane ograde i stupove za vinogradarstvo.
U prešama se mogu izraditi i razni profili (U,
C, L) u različitim dimenzijama.
3
O TIM Topusko d.d. | About TIM Topusko
TIM Topusko – Tvornica istegnutih me-
tala d.d. in Topusko has been doing business
since 1961 under the name of TIM – Tvornica
istegnutih metala d.o.o. Topusko. Prior to
the Homeland War, the company employed
around 500 workers and was an important
manufacturer for the local and foreign market.
Following Operation Storm in 1995, production
was once again activated and privatization
completed.
TIM Topusko d.d. is currently an autonomous
factory within the framework of the Signal Sistem company employing about 75 workers. The complete production program has been renewed
and initiated for the foreign market. The fac-
tory has specialized for the “roads program”, i.e.
the production of guard and protective rails,
portals.
The basic product manufactured by the factory
is expanded metals, i.e. mesh made from ex-
panded metal such as steel, aluminium, copper
and similar metals. Meshes manufactured from
expanded metals is used for multi-purpose
barriers (garden barriers, yards, residential
facilities, balconies and similar), and includes
the production of industrial barriers.
The manufacturing program includes con-
struction of supporting-columns of various
dimensions that are essential for any larger
construction project. Lattice treads of various
dimensions and shapes are also produced for
industrial plants. Deflecting rails for barriers
motorways are manufactured (one-sided and
double-sided for gullies and for structures such
as bridges, overpasses and similar), pedestrian
and protective rails on structures and prefabri-
cated mobile barriers for temporary barriers
purposes.
Our assortment includes steel pylons for wire
barriers and columns for vineyards.
The presses can manufacture various cross-sec-
tions (U, C, L) in various dimensions.
.
Podatci o tvrtci | Company facts
TIM Topusko tvornica istegnutih metala TIM Topusko extended metal works joint stock
dioničko društvo, company,
Skraćena tvrtka: TIM Topusko d.d. Abbreviated: TIM Topusko d.d.
Sjedište: 44415 Topusko, Školska bb Headquarters: 44415 Topusko, Školska bb
Direktor društva: Lana Kranjc Director: Lana Kranjc
4
Istegnuti metal | Expanded Metals
Istegnuti metal je poluproizvod u Expanded metals are half-products
pločama ili trakama od određenog in plates or tracks made from certain
materijala s otvorima koji su mrežasto materials with openings which are mesh
spojeni bez pletenja ili zavarivanja. connected without entwining or welding.
Najvažnija osobina istegnutog metala The most important characteristic of
je njegova velika krutost uz malu expanded metal is its lightweight rigidity.
težinu. Može se krojiti u razne oblike, It can be entwined in various shapes
a da pri tome ne izgubi na čvrstoći ili while not loosing is rigidity or solidity, an
se raspe što je prednost u odnosu na advantage with respect to other mesh-like
druge mrežaste materijale. Materijal od materials. Mesh can be produced from
kojeg se izrađuju mreže može biti čelik, such materials such as steel, aluminum,
aluminij, bakar, srebro pa čak i trakasti copper, silver or even PVC tracks. The
PVC. Primjena istegnutog metala je vrlo application of expanded metals is very
široka i koristi se: wide and is used:
• For barriers for gardens, backyards,
residential and industrial facilities,
• For floor treads, stairways, transport
vehicles, construction machinery,
cranes, mining, etc.,
• For protective mesh for machine belts
and other rotating parts,
• For sieves in milling, bakery and food
industry,
• In electrical industries for the
production of protective meshes
in batteries, plates for grounding,
protective covers for heating bodies,
masks on heaters, etc.,
• za izradu ograda za vrtove, dvorišta,
stambene i industrijske objekte
• za izradu gazišta za podove,
stepeništa, kod transportnih vozila,
građevinskih strojeva, kranova, u
rudarstvu i sl.
• za zaštitne mreže na pogonskim
remenicama i drugim rotirajućim
dijelovima
• za sita u mlinarskoj, pekarskoj i
prehrambenoj industriji
• u elektro-industriji za izradu
zaštitnih mreža u akumulatorima,
ploča za uzemljenje, zaštita grijaćih
tijela, maski na grijalicama i sl.
5
armaturu na asfaltiranim putevima, reinforcing steel, for walls and roofs,
podovima tvorničkih hala itd. reinforcing steel on asphalt paths,
factory floors, etc.
6
• In the radio and TV industry for
covering speakers and microphones,
• In light industry for the protection
of instruments, various supports,
shelves in cloakrooms, billboards,
garbage bins, towels, etc.,
• For pallets and boxes used for
transporting all kinds of goods,
• In the automobile industry for
automobile grills, tractors and
filters,
• In the construction industry as
• u radio- TV industriji za oblaganje
zvučnika, mikrofona
• u lakoj industriji za zaštitu
instrumenata, razne držače i police
u garderobama, panoe, za košare za
smeće, otirače i sl.
• za palete i kutije za sve vrste
transporta robe
• u automobilskoj industriji za maske
automobila, traktora, za filtere
• u građevinarstvu kao armaturne
mreže, za zidove i krovove, za
Istegnuti metal | Expanded Metals
Osnovne karakteristike za izbor
mreže od istegnutog metala
Osnovne karakteristike mreže od
istegnutog metala su: duža (LD) i kraća
(CD) dijagonala romba, debljina lima(d)
i širina rebra(s), kao i traženi materijal i
format mreže (u ploči ili u traci).
Oznake materijala su:
• Fe - za čelik DC 03 (hladno valjani)
ili S235RJ (toplo valjani)
• Al - za aluminij Pt 99,5%
• FeZn - za pocinčani lim 03 Z
Primjer za narudžbu:
Kataloška oznaka T-91 A
• materijal Fe
• otvor romba 55x140
• debljina lima 3 mm
• širina rebra 4 mm
Pregled dimenzija istegnutog metala:
• 3x6, 5x10, 6x12
• 3x10, 5x10,6x16
• 7x30, 10x42, 10x25
• 20x62, 30x80, 40x125
• 55x140, 80x200, 100x250
• 2x3, 2x4, 4x8, 5x6
• 54x200, 80x200
7
Basic Characteristics for Choosing
Mesh Made from Expanded Metal
The basic characteristics of mesh made
from expanded metal are its shorter (CD)
and longer (LD) lattice diagonal, sheet
thickness (t), and rib width (w), as well
as the sought after material and mesh
format (plate for track).
Material designations are:
• Fe – iron DC 03 (hot rolled) or S235RJ
(hot rolled)
• Al – aluminum Pt 99,5%
• FeZn – galvanized steel 03 Z
Example of an order:
Catalogue label T-91 A
• material Fe
• opening dimension 55x140
• sheeting thickness 3 mm
• lattice width 4 mm
An overview of the dimensions of
expanded metal:
• 3x6, 5x10, 6x12
• 3x10, 5x10,6x16
• 7x30, 10x42, 10x25
• 20x62, 30x80, 40x125
• 55x140, 80x200, 100x250
• 2x3, 2x4, 4x8, 5x6
• 54x200, 80x200
Istegnuti metal | Expanded Metals
Istegnuti metal | Expanded Metals
Pregled dimenzija alata za istegnuti metal
List of dimensions of tools for expanded metal
MALI STROJ – širina SMALL MACHINE – width
istegnutog metala do 500 mm of expanded metal up to 500 mm
Rb. Nazivna dimenzija
Item Nominal dimension
1. 0,5 x 1,5
2. 1 x 2
3. 1,25 x 2,5
4. 2,5 x 5
5. 2 x 5
6. 2,2 x 4
7. 2,5 x 6
8. 3 x 6 i 3 x 10
9. 4 x 8
10. 5 x 6 i 5 x 10
11. 6 x 12
SREDNJI STROJ MEDIUM MACHINE
Rb. Nazivna dimenzija
Item Nominal dimension
1. 3 x 6 i 3 x 10
2. 4 x 8
3. 5 x 10 i 5 x 20
4. 6 x 12 i 6 x 16
5. 7 x 15 i 7 x 30
6. 8 x 18
7. 10 x 25 i 10 x 42
8. 13 x 25
9. 24 x 62
10. 38 x 71
11. 40 x 50
VELIKI STROJ LARGE MACHINE
Rb. Nazivna dimenzija
Item Nominal dimension
1. 15 x 45
2. 20 x 62
3. 30 x 80
4. 40 x 115 i 40 x 125
5. 50 x 140
6. 80 x 200
7. 100 x 250
8
Istegnuti metal | Expanded Metals
3x6, 5x10, 6x12
Otvor romba Debljina lima-d
CDxLD (mm)
Lattice Sheeting
opening thickness – t
CDxLD (mm)
Najveća širina Najveća dužina
mreže (mm) mreže (mm)
Težina mreže
Kg/m2
Mesh weight
kg/m2
Kataloški broj
Catalogue
number
Lattice Maximum mesh Maximum mesh
thickness width (mm) length (mm)
T-1 3x6 0,5
T-2 3x6 0,5
T-3 3x6 0,5
T-4 3x6 0,5
T-5 3x6 0,8
T-6 3x6 0,8
T-7 3x6 0,8
T-8 5x10 0,5
T-9 5x10 0,5
T-10 5x10 0,5
T-11 5x10 0,8
T-12 5x10 0,8
T-13 5x10 0,8
T-14 5x10 0,8
T-15 5x10 0,8
T-16 6x12 0,5
T-17 6x12 0,5
T-18 6x12 0,5
T-19 6x12 0,8
T-20 6x12 0,8
T-21 6x12 0,8
T-22 6x12 1
T-23 6x12 1
T-24 6x12 1
0,8
1
1,2
1,4
1
1,2
1,4
1
1,2
1,4
1
1,2
1,4
1,2
1,4
1
1,2
1,4
1
1,2
1,4
1,2
1,4
1,8
9
1000
1000
1000
1000
1000
1000
1000
500 - 1000
500 - 1000
500 - 1000
500 - 1000
4026 1,93
3217
2695
2299
3217
2695
2299
- 5362
4477
3839
5362
2,42
2,89
3,39
3,88
4,63
5,42
1,45
1,47
2,03
2,32
2,78
3,25
3,48
500 . 1000 4477
500 - 1000
500 - 1000
500 - 1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
3839
4477
3839 4,06
6435 1,21
5362 1,45
4598 1,69
6435 1,94
5362 2,33
4598 2,71
5362 2,91
4598 3,39
3575 4,36
Debljina rebra
Istegnuti metal | Expanded Metals
3x10, 5x10, 6x16
6x16 1
6x16 1
1,5
2
1
1,5
2
1,5
2
10
0,5
0,5
0,8
0,8
0,8
Otvor romba Debljina lima-d
CDxLD (mm)
Lattice Sheeting
opening thickness – t
CDxLD (mm)
Najveća širina Najveća dužina
mreže (mm) mreže (mm)
Težina mreže
Kg/m2
Mesh weight
kg/m2
Kataloški broj
Catalogue
number
T-25
T-26
T-27
T-28
T-29
T-30
T-31
T-32
T-33
T-34
T-35
T-36
T-37
T-38
T-39
T-40
T-41
T-42
T-43
T-44
T-45
T-46
T-47
T-48
Lattice Maximum mesh Maximum mesh
thickness width (mm) length (mm)
3x10
3x10
3x10
3x10
3x10
3x10
3x10
3x10
5x10
5x10
5x10
5x10
5x10
5x10
5x10
5x10
6x16
6x16
6x16
6x16
6x16
6x16
0,5 1
0,5 1,2
0,5 1,5
0,8 1
0,8 1,2
0,8 1,5
1 1,2
1 1,5
0,5 1
0,5 1,2
0,5 1,5
0,8 1
0,8 1,2
0,8 1,5
1 1,2
1 1,5
0,5 1
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
2888 2,7
2682 2,91
2145 3,64
2888 4,32
2682 4,65
2145 5,82
2682 5,82
2145 7,27
5363 1,45
4469 1,74
3575 2,18
5363 2,33
4469 2,79
3575 3,49
4469 3,49
3575 4,36
6435 1,21
4290 1,82
3218 2,42
6435 1,94
4290 2,91
3218 3,88
4290 3,64
3218 4,85
Debljina rebra
3 1000 3575 6,54
11
Težina mreže
Kg/m2
Mesh weight
kg/m2
2,49
3,32
3,12
Istegnuti metal | Expanded Metals
7x30, 10x42, 10x25
Otvor romba Debljina lima-d
CDxLD (mm)
Lattice Sheeting
opening thickness – t
CDxLD (mm)
Najveća širina Najveća dužina
mreže (mm) mreže (mm) Kataloški broj
Catalogue
number
Lattice Maximum mesh Maximum mesh
thickness width (mm) length (mm)
T-49 7x30 0,8
T-50 7x30 0,8
T-51 7x30 1
T-52 7x30 1
T-53 7x30 1
T-54 10x42 0,8
T-55 10x42 0,8
T-56 10x42 0,8
T-57 10x42 1
T-58 10x42 1
T-59 10x42 1,5
T-60 10x42 1,5
T-61 10x25 1,5
T-62 10x25 1,5
T-63 10x25 1,5
Romb
1,5 1000
2 1000
1,5 1000
2 1000
3 1000
1,2 1000
1,5 1000
2 1000
1,5 1000
2 1000
2 1000
3 1000
2 1000
2,5 1000
5005
3754
5005
3754 4,15
2502 6,23
8938 1,4
7150 1,75
5363 2,33
7150 2,18
5363 2,91
5363 4,36
3575 6,54
5363 4,36
4290 5,45
Debljina rebra
Istegnuti metal | Expanded Metals
20x62, 30x80, 40x125
Otvor romba Debljina lima-d
CDxLD (mm)
Lattice Sheeting
opening thickness – t
CDxLD (mm)
Najveća širina Najveća dužina
mreže (mm) mreže (mm)
Težina mreže
Kg/m2
Mesh weight
kg/m2
Kataloški broj
Catalogue
number
T-64
T-65
T-66
T-67
T-68
T-69
T-70
T-71
T-72
T-73
T-74
T-75
T-76
T-77
T-78
T-79
T-80
T-81
T-82
T-83
T-84
T-85
T-86
T-87
T-84A
T-85A
T-86A
T-87A
T-88
T-89
T-90
T-88A
T-89A
T-90A
Lattice Maximum mesh Maximum mesh
thickness width (mm) length (mm)
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
20x62
30x80
30x80
30x80
30x80
30x80
30x80
30x80
30x80
40x125
40x125
40x125
40x125
40x125
40x125
0,8 1
0,8 1,2
1 1,2
1 1,5
1 2
1 2,5
1 3
1,5 2
1,5 2,5
1,5 3
2 3
2 3
2 4
2 5
3,5 5
3,5 6
3,5 7
3 5
3 6
3 7
3,5 6
3,5 7
3,5 8
3,5 10
3 6
3 7
3 8
3 10
3,5 4
3,5 5
3,5 6
3 4
3 5
3 6
12
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
2000
2000
2000
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
2400
2400
2400
2400
2400
2400
21450 0,58
17875 0,7
17875 0,87
14800 1,09
10725 1,45
8580 1,82
7158 2,18
10725 2,18
8580 2,73
7158 3,27
7158 4,36
7158 4,36
5264 5,93
4290 7,27
4290 12,73
3575 15,27
3065 17,81
4290 10,91
3575 13,09
3065 15,27
5363 10,18
4597 11,88
4022 13,57
3218 16,97
5363 8,73
4597 10,18
4022 11,64
3218 14,54
10725 5,09
8580 6,36
7150 7,34
10725 4,36
8580 5,45
7150 6,54
Debljina rebra
Istegnuti metal | Expanded Metals
55x140, 80x200, 100x250
3,5 10
3 5
3 6
3 7
3 8
3 10
13
Otvor romba Debljina lima-d
CDxLD (mm)
Najveća širina Najveća dužina
mreže (mm) mreže (mm)
Težina mreže
Kg/m2
Mesh weight
kg/m2
4,07
5,09
Kataloški broj
Sheeting
thickness – t
(mm)
3,5
3,5
3,5
Catalogue Lattice opening
number CDxLD
T-91 55x140
T-92 55x140
T-93 55x140
T-94 55x140
T-91A 55x140
T-92A 55x140
T-93A 55x140
T-94A 55x140
Lattice Maximum mesh Maximum mesh
thickness width (mm) length (mm)
4 2400 13406
10725 5
6
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
8938 6,11
7660 7,13
13406 3,49
10725 4,36
8938 5,24
7660 6,11
20109 2,72
16088 3,39
13406 4,07
11491 4,75
20109 2,33
16088 2,9
13406 3,49
11491 4,07
21450 2,54
17875 3,05
15321 3,56
13406 4,07
10725 5,25
21450 2,18
17875 2,62
15321 3,05
13406 3,49
10725 4,3
3,5 7
3
3
3
3
4
5
6
7
4
5
6
7
4
5
6
7
5
6
7
8
T-95 80x200 3,5
T-96 80x200 3,5
T-97 80x200
T-98 80x200
T-95A 80x200
T-96A 80x200
T-97A 80x200
T-98A 80x200
T-99 100x250
T-100 100x250
T-101 100x250
T-102 100x250
T-103 100x250
T-99A 100x250
T-100A 100x250
T-101A 100x250
T-102A 100x250
T-103A 100x250
3,5
3,5
3
3
3
3
3,5
3,5
3,5
3,5
Debljina rebra
Istegnuti metal | Expanded Metals
2x3, 2x4, 4x8, 5x6
500
500
500
500
500
500
500
500
500-1000
500-1000
500-1000
500-1000
500
500
500
7150
4290
4290
1,5 2,5
14
Otvor romba Debljina lima-d
CDxLD (mm)
Najveća širina Najveća dužina
mreže (mm) mreže (mm)
Težina mreže
Kg/m2
Mesh weight
kg/m2
0,44
0,73
1,09
Kataloški broj
Catalogue
number
T-01
T-02
T-03
T-04
Lattice
opening
CDxLD
2x3
2x3
2x3
2x3
2x4
2x4
2x4
2x4
4x8
4x8
4x8
4x8
5x6
5x6
5x6
Sheeting
thickness – t
(mm)
0,2
0,2
0,3
0,8
0,2
0,2
0,3
0,8
0,4
0,5
0,8
1
1
1
Lattice Maximum mesh Maximum mesh
thickness width (mm) length (mm)
0,3
0,5
0,5
1
0,3
0,5
0,5
1
1,5
1,2
1,5
1,5
1,5
2
1950 6,4
7150 0,44
4290 0,73
4290 1,09
1950 6,4
2860 2,18
3575 2,18
2860 4,41
2860 5,45
3575 4,36
2681 5,82
2145 10,91
Debljina rebra
Istegnuti metal | Expanded Metals
Šesterokutni romb: 54x200, 80x200 Six-sided lattice: 54x200, 80x200
5
6
7
8
9
10
6
7
8
9
10
11
12
15
Š-110 80x200
Š-111 80x200
Š-112 80x200
Š-113 80x200
Š-114 80x200
Š-115 80x200
Š-116 80x200
Otvor romba Debljina lima-d
CDxLD (mm)
Najveća širina Najveća dužina
mreže (mm) mreže (mm)
Težina mreže
Kg/m2
Mesh weight
kg/m2
2,91
3,49
4,07
4,66
5,24
5,82
2,18
2,55
2,91
3,27
3,64
4
4,36
Kataloški broj
Catalogue
number
Š-104
Š-105
Š-106
Š-107
Š-108
Š-109
Sheeting
thickness – t
(mm)
2
2
2
2
2
2
2
2
2
2
2
2
2
Lattice
opening
CDxLD
54x200
54x200
54x200
54x200
54x200
54x200
Lattice Maximum mesh Maximum mesh
thickness width (mm) length (mm)
2000 10725
2000 8938
2000 7660
2000 6702
2000 5958
2000 5363
2000 14300
2000 12256
2000 10725
2000 9533
2000 8580
2000 7799
2000 7150
Debljina rebra
• Odbojne ograde •
• Industrijske ograde •
• Ograde široke potrošnje •
• Montažno-pokretne ograde •
• Ograde mostova i vijadukata •
16
Deflecting barriers
Industrial barriers
Standard barriers
Prefabricated-mobile barriers
Bridge and viaduct guardrails
Ograde | Barriers
Ograde Barriers
TIM Topusko d.d. proizvodi TIM Topusko manufactures the
slijedeće tipove ograda: following types of barriers:
Ograde | Barriers
Industrijske ograde tip “Estetik” Industrial Barriers Type “Estetik”
Ograde od istegnutog metala Barriers made from expanded metal
predstavljaju vrlo pogodno i trajno represents a very suitable and permanent
rješenje za zaštitu industrijskih i drugih solution for the protection of industrial
prostora. and other facilities.
Dimenzije su standardne, a na zahtjev The dimension are standard, but upon
kupca izrađujemo i druge dimenzije. request by the customer we can also
produce other dimensions.
Uz ogradu se izrađuju i dvokrilna kolna Along with the barrier, we manufacture
vrata, kao i jednokrilna pješačka vrata. double gates and single pedestrian doors.
Ograda se isporučuje zaštićena The barrier is delivered protected
temeljnom bojom ili toplo pocinčana. using coloring, and can as required be
galvanized or colored with a final coat or
hot dip galvanized.
Proizvod Mreža od isteg. metala Visina(mm) Širina(mm)
Height (mm) Width (mm)
1960 2800
1960 1000
1960 5000
Product
Ograda / Barrier
Pješačka vrata / Pedestrian door
Kolna vrata / Gate
Mesh made from
expanded metal
80x200x4x5
80x200x4x5
80x200x4x5
17
Ograde | Barriers
Odbojne ograde Deflecting Barriers
U modernom cestovnom prometu In modern road transport along with
uz razvoj cestogradnje velika pažnja the road construction development,
poklanja se onom dijelu koji se odnosi great attention is given to those sections
na opremu ceste. Značajan element relating to road equipment. A significant
te opreme čine ČELIČNE ZAŠTITNE component of this equipment comprises
OGRADE uz ceste, koje svojom PROTECTIVE STEEL BARRIERS along roads,
funkcijom omogućuju sigurnost u which functionally contribute to road
prometu. Zaštitne ograde sprječavaju safety. The protective barriers prevent
iskliznuće vozila s pravca, tj. skrenuta the vehicle deviating and maintaining its
vozila prihvaća, zadržava i postepeno course, seldom even stopping the vehicle.
zaustavlja. Materijalne štete na vozilima Damage to vehicles is reduced as is the
su manje, a smanjuje se i broj nesreća number of injuries of those in traffic.
18
We are able to recommend from
production line standard protective
barriers of the following sorts:
• One-sided distance barrier (JDO)
along the route with poles at
intervals of 2-4 meters,
• One-sided distance barrier (JDOO)
on facilities with poles at intervals of
1.33 or 2 meters,
• Two-sided barrier (DDO) on routes
with poles at intervals of 2 or 4
meters,
• Double-sided distance barrier
(DDOO) on facilities with poles at
intervals of 1.33 or 4 meters,
• One-sided barrier (JO) along routes
with poles at intervals of 2 or 4
meters,
• Double-sided barrier (DO) along
routes with poles at intervals of 2 or
4 meters.
ljudi - sudionika u prometu.
Iz našeg proizvodnog programa
možemo vam preporučiti standardne
zaštitne ograde i to slijedeće tipove:
• JDO - Jednostrana distantna ograda
na trasi s razmakom stupova 2 ili 4
metra
• JDOO - Jednostrana distantna
ograda na objektu s razmakom
stupova 1,33 ili 2 metra
• DDO - Dvostrana distantna ograda
na trasi s razmakom stupova 2 ili 4
metra
• DDOO - Dvostrana distantna
ograda na objektu s razmakom
stupova 1,33 ili 4 metra
• JO - Jednostrana ograda na trasi s
razmakom stupova 2 ili 4 metra
• DO - Dvostrana ograda na trasi s
razmakom stupova 2 ili 4 metra
Ograde | Barriers
Osim osnovnih elemenata, stupa i Besides the basic components, pole and
plašta, distantne ograde imaju i odstojni sheeting, the distance barriers possess
element - odstojnik i kapu kao vezu spacer components – spacer and covering
stupa i odstojnika. connecting the pole and spacer.
Ograde za objekte montiraju se pomoću The barriers for facilities is assembled with
sidrenih ploča na koje se vijcima vežu the aid of anchoring plates where poles
stupovi. are fixed using bolts. Protective barriers
Zaštitne ograde uključuju i ukopane include dug in terminal endings at 4, 8 or
završetke na 4, 8 ili 12 metara. 12 meters.
Za sve ostale informacije u svezi For all other information relating to
montaže, zamjene ili održavanja installation, replacement or maintenance
zaštitnih ograda na cestama slobodno of protective barriers on roads feel free to
nas kontaktirajte. contact us.
19
Ograde široke potrošnje tip
“Estetik”
Za ograđivanje stambenih i
gospodarskih objekata, dvorišta,
balkona, vrtova, cvjetnjaka i sl.
proizvodimo vrlo funkcionalne i estetski
dopadljive ograde od istegnutog
metala.
Osnovni elementi ove ograde su:
• polje i stup
• pješačka vrata sa stupom i bravom
• kolna vrata sa stupom
Ograde su izrađene od istegnutog
metala zavarenog u okvir od cijevi ili
profila.
Detaljni podatci u tablici
850 2500
850 2500
1050 2500
1050 2500
1200 1000
1200 1000
1400 1000
1400 1000
1200 3000
1200 3000
1200 4000
1200 4000
1400 3000
1400 3000
1400 4000
1400 4000
80x200x3x4
55x140x3x4
80x200x3x4
55x140x3x4
80x200x3x4
55x140x3x4
80x200x3x4
55x140x3x4
80x200x3x4
55x140x3x4
80x200x3x4
55x140x3x4
80x200x3x4
55x140x3x4
80x200x3x4
55x140x3x4
20
Ograda široke potrošnje
tip ESTETIK
Standard barriers
type ESTETIK
Pješačka vrata ESTETIK
Pedestrian door ESTETIK
Velika (kolna) vrata široke
potrošnje ESTETIK
Large (gate)
standard doors (ESTETIK)
Ograde | Barriers
Standard Barriers “Estetik”
We manufacture very functional and
esthetically attractive barriers made from
expanded metals for barriers residential
and business premises, backyards,
balconies, gardens, flowerbeds, etc.
The basic components for such barriers
are:
• field and pole,
• pedestrian door with pole and lock,
• gates with pole.
Barriers are made from expanded metal
welded into a pipe or profile frame. Details
in the table:
Proizvod Istegnuti metal Visina (mm) Širina (mm)
Product Expanded Metals Height (mm) Width (mm)
Ograda široke potrošnje tip ESTETIK Standard barriers type ESTETIK
Pješačka vrata Pedestrian door
Velika (kolna) vrata Large (gate) door
21
Ograde | Barriers
Primjer za narudžbu: / Order example:
80x200x3x4-1050x2500
80x200x3x4-1400x1000
80x200x3x4-1400x4000
U našem proizvodnom programu
imamo i montažno-pokretne ograde
koje su prikladne za privremeno
ograđivanje objekata, stadiona,
igrališta, parkirališta, izradu prolaza i
slične namjene. Ograde se isporučuju u
pocinčanoj izvedbi i vrlo su trajne.
Montažno - pokretne ograde
Dimenzije: 1100 x 2500
151 116 116
520
Ograde | Barriers
Montažno-pokretne ograde Prefabricated-Mobile Barriers
Our production program offers
prefabricated-mobile barriers suitable for
temporary barriers of premises, stadiums,
playing fields, parking lots, pathways and
similar uses. The barriers are delivered
galvanized and is very durable.
Prefabricated - mobile barriers
Dimensions: 1100 x 2500
2500
2150 225
22
The supporter can be fixed to the base,
and can carry secondary structures used
in construction.
Materials:
The basic piping material used for
making supporters is steel quality S235
JR
Type of supporting columns:
Besides the standard types, on the
customer’s request we manufacture
slanted supporting columns, and
supporting columns of various lengths.
Manner of delivery:
supporting columns are delivered
colored, galvanized or rawo
23
podupirači se mogu učvrstiti za
podlogu, na njih se može osloniti
sekundarna konstrukcija potrebna pri
izgradnji
Materijal:
Osnovni materijal cijevi za izradu
podupirača je čelik kvalitete S235 JR
Vrsta podupirača:
osim standardnih vrsta, na osnovu
zahtjeva kupca proizvodimo i kose
podupirače, te podupirače različitih
duljina
Način isporuke:
podupirači se isporučuju temeljno
obojeni, pocinčani ili u crno
Supporting columns are independent
poles used in building and can bear
large compressive forces. Here are some
of the characteristics of supporters:
Assembly and disassembly:
• Supporters are easily assembled
and disassembled,
• Comprise of upper and lower
sections, washers and locks,
• Upper and lower sections are made
from piping with welded bases,
• Upper section is a smaller diameter
and is inserted into the lower
section,
• Manual setting of support height is
performed using holes in the upper
section with intervals of 100mm
and a lock, and then the washer is
used for finer adjustments,
Podupirač je samostalni stup koji se
primjenjuje u građevinarstvu, a može
preuzeti velike tlačne sile.
Evo nekih karakteristika naših
podupirača:
Montaža i demontaža:
• podupirač se lako montira i
demontira
• sastoji se od gornjeg i donjeg dijela,
matice prstena i osigurača
• donji i gornji dio izrađen je od cijevi
sa zavarenim stopama
• gornji dio je manjeg profila i uvlači
se u donji
• grubo podešavanje visine
podupirača omogućeno je pomoću
rupa na gornjem dijelu s razmacima
od 100 mm i osigurača, a zatim se
maticom izvodi fino podešavanje
PodupiraËi | Supporting Columns
N1 0,5 0,8 N2 0,7 1,2 N3 1,0 1,7
N4 * 1,6 2,9 N5 1,9 3,4 N6 2,5 4,4
*preporučamo, najbrža isporuka * recommend quickest delivery
1195
795
745
545
1695
1045
0,5/0,8 0,7/1,2 1,0/1,7 1,6/2,9 1,9/3,4 2,5/4,4
G = 5,0 kg G = 6,0 kg G = 7,5 kg G = 10 kg G = 12 kg G = 15 kg
24
Podupirači | Supporting Columns
Pregled standardnih veličina: Overview of standard dimensions:
Tip Minimalna visina (m) Maksimalna visina (m) Težina (Kg)
Type Minimum height (m) Maximum height (m) Weight (kg)
5 6
7,5 10 12 15
4395
3395
2995
2545
1945
1645
Rešetkasta gazišta | Lattice Treads
Rešetkasta gazišta izrađuju se prema Lattice treads (grills) are constructed
projektu naručioca u različitim according to the clients designs in various
formatima i oblicima. shapes and manner.
Rešetkasta gazišta imaju široku primjenu Lattice treads have a wide usage in
u kotlogradnji, rudarstvu, brodogradnji, boiler production, mining, shipbuilding
skladištima, u industriji kao kranske industry, warehousing, industries such as
staze, stepeništa, ophodne staze u crane paths, stairways, and pathways in
postrojenjima. facilities.
Neke od karakteristika naših rešetkastih Some of the characteristics of our lattice
gazišta su: treads are:
• dimenzije do 2000x1500 mm (AxB), • dimensions: 2000x1500mm (AxB)
• kvaliteta materijala – S235 JRG2, • quality of materials – S235 JRG2
• površinski su zaštićena temeljnom • protected surfaces using dyes or hot-
bojom ili su vruće pocinčana, dip galvanized, depending on the
ovisno o zahtjevu kupca. customer’s demands
Uz gazišta isporučujemo i vezne Along with the tread we recommend
•
•
•
•
25
BARBEQUE
COMB
FLOOR STANDARDS
REST PLATFORMS OF EXPANDED
MATERIAL
connecting components offered in two
versions: connecting two grills and
connecting grills with structures.
Overview of types of grills:
elemente i to u dvije izvedbe:
• za međusobni spoj dviju rešetki
• za spoj rešetke s konstrukcijom.
Pregled tipova gazišta:
• ROŠTILJ
• ČEŠALJ
• BRODSKI STANDARDI
• GAZIŠTA OD ISTEGNUTOG METALA
Rešetkasta gazišta | Lattice Treads
Pregled tipova gazišta - ROŠTILJ Overview of Grill Types (BARBEQUE)
25x2
30x3
25,50 26,80
21,26 22,30
30x2 30x2 30x4
40x3 40x3 40x4 67,30 70,70
25x3 25x3 25x4 32,22 33,80
30x3 30x4 38,66 40,60
26
Korak
lamele
axb
Step
lamella
Okvirna
lamela
H1xS3
Frame
lamella
H1xS3
Dopuštena
nosivost kN/m2
AxB 1000x1000
Permitted load
bearing kN/m2
AxB 1000x1000
10,50
11,10
16,10
22,20
Oznaka za Visina
narudžbu rešetke
Nosiva
H1xS1
Load
bearing
Poprečna
H2xS2
Perpendicular
H2xS2
Težina (Kg) Težina (Kg)
Obojeno Pocinčano
Weight (kg) Weight (kg)
dyed galvanized
Grill
height
20
25
30
30
35
40
30
25
30
Order code
G-1-R
G-2-R
G-3-R
G-4-R
G-5-R
G-6-R
G-7-R
G-8-R
G-9-R
axb H1xS1
30x30 20x2
30x30 25x2
30x30 30x2
30x30 30x3
30x30 35x3
30x30 40x3
30x90 30x2
30x90 25x2
30x90 30x3
30x90 25x3
20x2 20x4 22,70 23,80
20x2 25x4
20x2 30x4
15x3 30x4
15x3 35x4
15x3 40x4
15x2 30x4
20x2 25x4
15x3 30x4
20x3 25x4
25,90 27,90
29,10 30,60
40,00 42,00
44,50 46,70
48,90 51,40
25,00 27,00
22,00 23,60
29,00 31,00
26,40 27,70
Pregled tipova gazišta - ČEŠALJ Overview of Grill Type - COMB
Oznaka za Visina Korak Nosiva Poprečna Okvirna lamela
narudžbu rešetke lamele axb H1xS1 H2xS2 H1xS3
25x2 25x4
G-10-R 25
Težina (Kg) Težina (Kg)
Nezaštićeno Pocinčano
Perpendicular Frame lamella Weight (kg) Weight (kg)
H2xS2 H1xS3 unprotected galvanized
G-1-Č 20
G-2-Č 25
G-3-Č 30
G-4-Č 30
G-5-Č 35
G-6-Č 40
G-7-Č 25
G-8-Č 30
G-9-Č 25
G-10-Č 30
20x2 20x2 20x4 21,60 22,70
25x2 25x2 25x4 27,00 28,40
30x2 30x2 30x4
30x3 30x3 30x4
35x3 35x3 35x4
32,40 34,00
50,50 53,00
58,90 61,90
Load
Order code Grill height bearing
H1xS1
Step
lamella axb
30x30
30x30
30x30
30x30
30x30
30x30
30x60
30x60
30x60
30x60
Pregled tipova gazišta
GAZIŠTA OD ISTEGNUTOG METALA
Dimenzija gazišta Dopuštena nosivost
Rest platforms Allowed bearing
dimensions capacity
A x B u mm kN/m2
800 x 300 26,20
800 x 1000 11,20
1000 x 1000 7,00
1000 x 1200 6,70
1000 x 1400 7,20
1200 x 1000 4,30
1400 x 1000 3,50
1500 x 1000 3,20
27
Okvirna lamela Težina (Kg)
H1xS3 Nezaštićeno
Frame lamella Weight (kg)
H1xS3 unprotected
30x4 28,67
30x4 27,13
50x5 65,01
40x4 53,24
Order code Grill height
SB60614 30
SB11003 30
SB 50800 50
SB 50799 40
30x3 ČBRo8
30x3 ČBRo8
50x5 ČBRo10
40x4 ČBRo10
Rešetkasta gazišta | Lattice Treads
Pregled tipova gazišta - BRODSKI STANDARDI Overview of Grill – FlOOR STANDARDS
Poprečna
Perpendicular
Oznaka za Visina Korak lamele Nosiva
narudžbu rešetke axb H1xS1
37x74
37x100
37x100
37x100
Step lamella Load bearing
axb H1xS1
Čelični stupovi za žičane ograde i vinogradarstvo
Steel Columns for Wire Barriers and Vineyards
Stupovi za žičanu ogradu imaju vrlo Columns for wire barriers have a side
široku primjenu. Primjenjuju se za usage. They are used for motorway
ograde autocesta, cesta, dvorišta, a barriers, roads, backyards, and are
posebno su pogodni u poljoprivredi kod especially suitable for agricultural uses for
planažnih nasada. plantations.
Stupovi su izrađeni od čelika The columns are made from steel S235JR
S235JR i površinski zaštićeni vrućim and have surfaces protected using
pocinčavanjem. Male su težine, a žičana galvanization. They are lightweight, while
ograda lako se montira (metalna pera). the wire barriers is easily assembled (metal
pinion).
Pregled dimenzija stupova: Overview of column dimensions:
6,60
7,20
7,80
8,40
9,60
1400 2,50
1600 2,50
1800 2,50
2000 2,50
2400 2,50
28
Korisna debljina L1+L2(mm) Debljina lima (mm) Masa kg/kom.
Usable lenght L1+L2 (mm) Sheetin thickness (mm) Weight kg/item.
L (mm)
L (mm)
2200
2400
2600
2800
3200
Pregled dimenzija stupova za Overview of wire barriers column
žičanu ogradu dimensions:
L (mm)
L (mm)
1500
1750
2000
2250
2500
3000
Korisna duljina L1+L2 (mm) Debljina lima (mm) Masa Kg/kom.
Usable length L1 + L2 (mm) Sheeting thickness (mm) Weight kg/item
1000 2,50 4,50
1250 2,50 5,25
1500 2,50 6,00
1750 2,50 6,75
2000 2,50 7,50
2500 2,50 9,00
• statička otpornost na udarce
• 10 puta manja težina od betonskih
stupova
• velika trajnost (površinska zaštita-
cink)
• lako se ugrađuju i jednostavni su za
manipulaciju
• pogodni su za strojnu berbu
• proizvode se u dimenzijama od
1500 do 3000 mm
45
10 25 10
2,0
• Static resistance to shocks,
• Ten times less weight than concrete
columns,
• Durable (zinc protected surfaces),
• Easily installed and simple to use,
• Suitable for machine harvest,
• Manufactured in dimensions from
1500mm to 3000mm.
60
15 30 15
2,5
»eliËni stupovi za žiËane ograde i vinogradarstvo
Steel Columns for Wire Barriers and Vineyards
Čelični stupovi za vinogradarstvo i The steel columns for vineyards and fruit
voćarstvo izrađeni su sa većim brojem growing are made from a larger number
pera na razmaku 100 mm. Neke od of pinions at 100mm intervals. Some of
prednosti ovih stupova su: the advantages of these columns are:
29
Usluge | Services
Hladno oblikovani profili Cold Rolled Profiles
Na našim prešama možemo oblikovati Our pressures can shape profile of various
profile raznih dimenzija i oblika (“C” dimensions and shapes (“C” profile, “U”
profil, “U” profil, “L” profil itd.) dužine profile, “L” profile, etc.) up to 3 meters in
do 6 metara. length.
Za određene dimenzije pošaljite nam For a specific dimension, send us a request.
30
Miscellaneous
• Our pressing machines from 25
to 400 tones can produce various
products from steel using cold rolled.
In particular circumstances we can
use your tools.
• We offer the service of leveling and
cutting steel, aluminum and copper
tracks, etc. up to widths of 1000mm.
• We are assembling all products
comprised in the catalogue.
• Fabrication of metal structures
• Plasma cutting services
TIM Topusko can ensure that all
products manufactured by the company
shall be plastified, painted or galvanized.
All products shall be accompanied by all
required test certificates.
For more information on our services
contact us.
upit.
Ostalo
• Na našim prešama od 25 do 400
tona možemo izrađivati razne
proizvode od čelika procesom
hladnog oblikovanja. U posebnim
slučajevima možemo koristiti i vaš
alat.
• Obavljamo usluge ravnanja i
krojenja čeličnih, aluminijskih,
bakrenih traka i sl. do širine
1000mm.
• Obavljamo montažu svih proizvoda
iz kataloga.
• Izrada metalnih konstrukcija
• Usluge rezanja na plazmi
TIM Topusko d.d. može osigurati da
svi proizvodi koje proizvodi budu
plastificirani, ličeni ili pocinčani.
Za sve proizvode imamo sve zahtjevane
ateste.
Za ostale usluge kontaktirajte nas za
dogovor.
Kontakti | Contacts
TIM Topusko d.d.Tvornica istegnutih TIM Topusko - extended metal works metala d.d. Hrvatska joint stock company
44415 Topusko, Školska bb 44415 Topusko, Školska bb
E-mail: E-mail: tim-topusko@tim-topusko.hr tim-topusko@tim-topusko.hr
Tel: +385 44 520 500 Tel: +385 44 520 500 Fax: +385 44 520 503 Fax: +385 44 520 503
Recommended