View
2
Download
0
Category
Preview:
Citation preview
1/4
FIM
0213
A_K
ann
Kann220V-240VAC
50/60Hz StandardNorme installation
200
300 4 Tiges M14/Ø16x300 (Non fournies)
4 anchor bolts M14/Ø16x300 (Not supplied)
Mât orienté à 45° par rapport à la semelle.Mast oriented at 45° in relation to the base plate.
531
531
531
3494
4500
5494
149680
240
1
2525
02
802
802
401
401
3496
3.5m
2525
4.5m 5.5mMasseMass
MasseMass
MasseMass38 kg 47.5 kg 57 kg
Dimensions (mm):
160x160
Si le câble extérieur, la source lumineuse ou le driver contenus dans ce luminaire sont endommagés, ils doivent être exclusivement remplacés par le fabricant, son agent de maintenance ou une personne de qualification
équivalente, cela afin d’éviter tout risque If the external cable, lighting source or driver contained in this light are damaged, they have to be replaced by the
manufacturer or its maintenance agent or an equally qualified worker, in order to avoid any risk
2/4
FIM
0213
A_K
ann
Installation
1
Partie 1Part 1
Partie 2Part 2
Partie 3Part 3
1
Indication côté porte Indication of the door side
4Non fournisNot supplied
x8
Sangle pour lever la borneLanyard for lifting the bollard
1
2
Livraison du produit en 3 partiesDelivery of the product in 3 parts
43
2
Couple de serrageTightening torque
6 N.m
Pas de sangle sur les parties 2 et 3No lanyard on parts 2 and 3
Couple de serrageTightening torque
6 N.m
2
x4
3
+
3/4
FIM
0213
A_K
ann
Maintenance
Nettoyage/ Cleaning
2
1
En cas de démontage du module retenirle connecteur pour pas que le câble tombe
En cas de démontage du module, retenez le connecteur de manière à ce que le câble ne tombe pas
When removing the module, retain the the connector so that the cable does not fall out
4/4
FIM
0213
A_K
ann
Connexion pour les luminaires précablés
Les connexions éléctriques du bloc de jonction doivent respecter la même classe d’isolation que le luminaire.
Connection for luminaires with outgoing cable
Electrical connections of the junction box have to main the same insulation class the luminaire.
Tension assignéeNominal voltage Uniquement pour luminaires avec drivers
Only for luminaires with drivers
Nombre de bornes et capacité de connexion assigné
Number of poles and terminal section
4x 1.5mm²
Méthode de fixationFixation method
Dépend du bloc de jonctionDepend on the junction box
220-240V
N L
Dal
i -D
ali +
/ Pi
lote
Recommended