Matubo - návod - SUPERDUO™ - Snowflake

7/25/2019 Matubo - návod - SUPERDUO™ - Snowflake

http://slidepdf.com/reader/full/matubo-navod-superduo-snowflake 1/1

Superduo rope1)

String five Superduo beads. Tie a square

knot to form a circle. Then pass through the

second hole of one of the Superduo beads

next to the knot

2)

Add one Superduo bead. Pass

through the second hole of the next

Superduo bead from the first row.

Repeat five times. At the end of the

row, you have to pass through the first

hole and then the second hole of the

first Superduo bead of this row. This isthe step-up. Remember that after

each "step-up", you will have to work

in an opposite direction.

3)

This row is similar to the previous one.

Add one Superduo bead and pass

through the second hole of the next

Superduo from the previous row.

Repeat until you finish the round. Forthe step-up, you need to pass through

the first hole and then through the

second hole of the first Superduo of

this row.

4)

Repeat steps 2 and 3 until you reach

the desired length. In the last row, do

the step-up and then pass throughthe second holes of all the Superduos

in the last row. Tie a few half-hitch

knots and cut off the remaining

thread.

You can finish the rope by adding bead caps. You can also make a

few shorter segments of this rope and use them as beaded beads.

Material and supplies:Superduo Beads (20 grams for a

bracelet, 40 - 60 grams for a necklace)

Beading needle

Thread (Fireline)

Optional:Jewelry findings (eyepins, bead caps, jumprings and a clasp)

Difficulty: Beginners

Technique: Peyote stitch

You can also use more colors of Superduos and create a

patterned rope.

End of the finished rope.

Design and tutorial by Nela K á belov á  (www.gianelle.beadforum.cz)

For personal use only. www.matubobeads.com