View
216
Download
2
Category
Preview:
Citation preview
600284406 0466Product Code: Barcode:
FSEME
THE KIT CONTAINS
The Energy monitor unit and how it works
www.ellies.co.za
Elite ClassicWireless Energy Monitor
���������������������
������������������������������������������������������������������������������������������
1 x Elite Wireless Display1 x Transmitter1 x Mini CT Sensor6 x AA Batteries
LOCATE YOUR LIVE FEED WIRE ATTACH THE SENSOR
LINK THE TRANSMITTER MONITOR, REDUCE, SAVE
1. 2. 3.
4.
The elite classic energy monitor is simple to install and easy to use. The monitor receives the data wirelessly via the transmitter and displays the demand in kilowatts of energy being consumed at any given time. The elite classic may be programmed for various rates, ensuring that the cost of your energy is accurate.
Instantly see the cost of using energy in your home
View your daily, weekly, monthly or average data
Tariff rates pre-programmed (or updated manually)
Discover and reduce your carbon footprint
WIRELESS ENERGY MONITOR
Product Code: Barcode:
FSEMHHK 600284406 2101Engage Hub Kit
THE KIT CONTAINS
www.elliesrenewable.co.za
Product Code: Barcode:
FSEMMS26002844000660
www.ellies.co.za
Replacement sensor or upgrade your Ellies/Efergy monitor to three phase by purchasing two additional sensors. Suitable for cable diameters up to 13mm.
Diagram
THE PACKAGE CONTAINS
2 x Sensor units
Wireless Energy Monitor Additional Sensor excluding software.
Additional Sensors (x2) to fit theElite and E2 Wireless Energy Monitors
Additional Sensors (x2) to fit theElite and E2 Wireless Energy Monitors
TECHNICAL INFORMATION
Specifications:
Max. current:
Max. permitted cable diameter:
Max. voltage:
Measuring CAT II
90 Amp
13mm
600VAttach the sensorPull the clasp to open the CT sensor. Place the sensor around the feed cable and push the clasp to shut. Insert the sensor jack into the base of the transmitter.IMPORTANT - The CT sensor must be clamped around the LIVE wire only andnot around a cable containing the live, neutral and earth wires.
If you are concerned about installationplease contact an electrician, ensurecables are not damaged. Do not cut cables.
Link transmitter and displayPush the link button located on the back of the display unit. The link icon on the screen will flash. Press the button on the transmitter to complete synchronization. If the link is completed you will see the link icon is back on the screen.
PACKAGING DIMENSIONS
Weight (kg) Depth (mm)
0,02 3,7 10,9 24,3
Width (mm)Height (mm)
Package
Product Code: Barcode:
FSEMXLS6002844058463
www.ellies.co.za
Replacement sensor or upgrade your Ellies/Efergy monitor to allow connection to larger diameter cables up to 19mm.
Diagram
PACKAGING DIMENSIONS
Weight (kg) Depth (mm)
0,02 3,7 10,9 24,3
Width (mm)Height (mm)
Package
THE PACKAGE CONTAINS
1 x Sensor unit
Wireless Energy Monitor Additional Sensor excluding software.
TECHNICAL INFORMATION
Specifications:
Max. current:
Max. permitted cable diameter:
Max. voltage:
Measuring CAT II
140 Amp
19 mm
600V
Attach the sensor
Large Sensor to fit all Ellies/EfergyWireless Energy Monitors
Large Sensor to fit all Ellies/EfergyWireless Energy Monitors
Caution: Turn o� power before installing these devices. If you are concerned about installation please contact an electrician, ensure cables are not damaged. Do not cut cables.
Pull the clasp to open the CT sensor. Place the sensor around the feed cable and push the clasp to shut. Insert the sensor jack into the base of the transmitter.IMPORTANT - The CT sensor must be clamped around the LIVE wire only and not around a cable containing the live, neutral and earth wires.
1 3
4BLACK
Link transmitter and displayPush the link button located on the back of the display unit. The link icon on the screen will flash. Press the button on the transmitter to complete synchronization. If the link is completed, you will see that the link icon is back on the screen.
Note: Monitors total power consumption of all three phases together.
Product Code: Barcode:
FSEMXLS26002844000677
Additional Large Sensors (x2) to fitthe Elite and E2 Energy Monitors
Additional Large Sensors (x2) to fitthe Elite and E2 Energy Monitors
www.ellies.co.za
Replacement sensor or upgrade your Ellies/Efergy monitor to three phase by purchasing two additional sensors.
Diagram
THE PACKAGE CONTAINS
2 x Sensor unit
Wireless Energy Monitor Additional Sensor excluding software.
TECHNICAL INFORMATION
Specifications:
Max. current:
Max. permitted cable diameter:
Max. voltage:
Measuring CAT II
140 Amp
19 mm
600V
Attach the sensor
Link transmitter and display
If you are concerned about installationplease contact an electrician, ensurecables are not damaged. Do not cut cables.
Pull the clasp to open the CT sensor. Place the sensor around the feed cable and push the clasp to shut. Insert the sensor jack into the base of the transmitter.IMPORTANT - The CT sensor must be clamped around the LIVE wire only and not around a cable containing the live, neutral and earth wires.
Push the link button located on the back of the display unit. The link icon on the screen will flash. Press the button on the transmitter to complete synchronization. If the link is completed you will see the link icon is back on the screen.
PACKAGE DIMENSIONS
Weight (kg)(mm)(mm)(mm)
Width Height
3.7 0.0224.3 10.9
Depth
Product Code: Barcode:
FSEM2 600284406 0459Wireless Energy Monitor
Model NameModel NumberFrequencyTransmission TimeTransmission RangeSensor Voltage RangeMeasuring CurrentAccuracy
The backlight will be activated from 18:00 to 6:00 hours
e2 IRE2-UK433.5MHz6, 12 or 18 Sec40 - 70m110 - 600V50mA - 90A> 90%
TECHNICAL INFORMATION
ENERGY MONITORS - HOW THEY WORK
Our e2 Classic Energy Monitor is simple to install and easy to use. A mini current sensor is clipped on to the supply cables. A lead from the sensor is plugged into the energy transmitter, which then wirelessly sends real time data to the energy monitor. The monitor receives the data and displays the demand in kilowatts of energy being consumed at any given time. The e2 OPT may be programmed for various rates, ensuring that the cost of your energy is accurate.
Transmitter PC or MACMonitorElectricityMeter
Mini CTSensor
AVERAGE DATA
The e2 classic displays your average energy usage per day, week and month. See the impact of your energy efficient e�orts, and then watch your average energy usage reduce.
INSTANT SAVINGS
The e2 classic updates every 6, 12 or 18 seconds. The display then shows how much energy is consumed at that moment and how much it will cost if the ‘energy now’ load is maintained for a period of one day.
1 x e2 Wireless Energy Monitor1 x Transmitter1 x Mini CT Sensor
Batteries Supplied1 x USB cableelink 2.0 software download from efergy.com
THE KIT CONTAINS
MEMORY FUNCTION
The e2 classic memory function allows you to view your energy usage by the day, week or month. The e2 classic helps you understand your energy usage and how it changes over time.
DOWNLOAD YOUR DATA
Download your energy consumption data to your PC or Mac and analyse it with our efergy elink 2.0 software. View informative graphs, print or save reports as PDF files. Data may also be viewed using Excel.
Tom Bancroft
cost CO2Electricity
12:00 15:00 21:0018:0009:0006:0003:0000:00
2.410kg5.820kWh $0.82CostElectricity CO2
Wednesday, 15th September 2010
MonthsDays Years
Day total:
0.80kWh
0.20kWh
0.40kWh
0.60kWh
0.00kWh
Tuesday, 14th Thursday, 16th
1.00kWh
Your daily target
$ 2.00Currently over target
WIRELESS ENERGY MONITOR
Download your energy data to elink
Instantly see the cost of using energy in your home
Mains powered with battery back up for portability
View your daily, weekly, monthly or average data
Uses multiple tari� options
Discover and reduce your carbon footprint
Learn about energy with your family
Tari� rates pre-programmed (or updated manually)
SAVE UP TO 20% OFFYOUR ENERGY BILL*
www.elliesrenewable.co.za
Product Code: Barcode:
FSEM2T 600284400 0301
3 Phase Wireless Energy Monitor
ENERGY MONITORS - HOW THEY WORK
THE KIT CONTAINS
MEMORY FUNCTION
The e2 classic memory function allows you to view your energy usage by the day, week or month. The e2 classic helps you understand your energy usage and how it changes over time.
DOWNLOAD YOUR DATA
Download your energy consumption data to your PC or Mac and analyse it with our efergy elink 2.0 software. View informative graphs, print or save reports as PDF files. Data may also be viewed using Excel.
Tom Bancroft
cost CO2Electricity
12:00 15:00 21:0018:0009:0006:0003:0000:00
2.410kg5.820kWh $0.82CostElectricity CO2
Wednesday, 15th September 2010
MonthsDays Years
Day total:
0.80kWh
0.20kWh
0.40kWh
0.60kWh
0.00kWh
Tuesday, 14th Thursday, 16th
1.00kWh
Your daily target
$ 2.00Currently over target
www.elliesrenewable.co.za
Download your energy data to elink
Instantly see the cost of using energy in your home
Mains powered with battery back up for portability
View your daily, weekly monthly or average data
Uses multiple tari� options
Discover and reduce your carbon footprint
Learn about energy with your family
Tari� rates pre-programmed (or updated manually)
Our E2 Classic energy monitor is simple to install and easy to use. 3 mini current sensors are clipped to the incoming supplycables (3 phases).Leads from the sensors are plugged into the transmitter.The display shows the combined 3 phase power consumption.The monitor receives the data and displays the demand in kilowatts of energy being consumed at any given time.The E2 Classic may be programmed for various rates, ensuringthat the cost of your energy is accurate. The E2 Classic worksin conjunction with your energy management software elink,which allows you to look at in-depth energy information onyour computer.
PACKAGE DIMENSIONS
DWeight
(kg)(mm)(mm)(mm)Width Height
220 0.7455 205
Depth
Blister PackDimensions
D
Product Code: Barcode:
FSEMHH 600284406 2095Engage Hub Solo
THE KIT CONTAINS
www.elliesrenewable.co.za
Link transmitter and displayPush the link button located on the back of the display unit. The link icon on the screen will flash. Press the button on the transmitter to complete synchronization. If the link is completed, you will see that the link icon is back on the screen.
Product Code: Barcode:
FSEMMS600284405 8456
www.ellies.co.za
Replacement sensor or upgrade your Ellies/Efergy monitor to three phase by purchasing an additional sensor.
PACKAGING DIMENSIONS
Weight (kg) Depth (mm)
0.073 200 82 36
Width (mm)Height (mm)
Package
THE PACKAGE CONTAINS
1 x Sensor unit
Fits all Ellies Efergy wireless monitors
Sensor to fit all Ellies/EfergyWireless Energy Monitors
Sensor to fit all Ellies/Efergy Wireless EnergyMonitors
1RED
2WHITE
3BLUE
4BLACK
Attach the sensorPull the clasp to open the CT sensor. Place the sensor around the feed cable and push the clasp to shut. Insert the sensor jack into the base of the transmitter.IMPORTANT - The CT sensor must be clamped around the LIVE wire only and not around a cable containing the live, neutral and earth wires.
Wireless Energy Monitor Additional Sensor excluding software.
Caution: Turn o� power before installing these devices. If you are concerned about installation please contact an electrician, ensure cables are not damaged. Do not cut cables.
Note: Monitors total power consumption of all three phases together.
How to monitor three phasePurchase two additional large sensors. Fit the additional sensor jacks to thetransmitter unit (fits all Ellies/Efergy transmitter units). Fit the additional sensor clamps to incoming power cables.
Diagram
TECHNICAL INFORMATION
Specifications:
Max. current:
Max. permitted cable diameter:
Max. voltage:
Measuring CAT II
90 Amp
13 mm
600V
Product Code: Barcode:
FSEMOP 600284406 1609Wireless Energy Monitor
Model NameModel NumberFrequencyTransmission TimeTransmission RangeSensor Voltage RangeMeasuring CurrentAccuracy
The backlight will be activated from 18:00 to 6:00 hours
e2 IRE2-UK433.5MHz6, 12 or 18 Sec40 - 70m110 - 600V50mA - 90A> 90%
TECHNICAL INFORMATION
ENERGY MONITORS - HOW THEY WORK
Our e2 Classic Energy Monitor is simple to install and easy to use. A mini current sensor is clipped on to the supply cables. A lead from the sensor is plugged into the energy transmitter, which then wirelessly sends real time data to the energy monitor. The monitor receives the data and displays the demand in kilowatts of energy being consumed at any given time. The e2 OPT may be programmed for various rates, ensuring that the cost of your energy is accurate.
Transmitter PC or MACMonitorElectricityMeter
OpticalSensor
AVERAGE DATA
The e2 classic displays your average energy usage per day, week and month. See the impact of your energy efficient e�orts, and then watch your average energy usage reduce.
INSTANT SAVINGS
The e2 classic updates every 6, 12 or 18 seconds. The display then shows how much energy is consumed at that moment and how much it will cost if the ‘energy now’ load is maintained for a period of one day.
1 x e2 Wireless Energy Monitor1 x Transmitter1 x Mini Optical Sensor
Batteries Supplied1 x USB cableelink 2.0 software download from efergy.com
THE KIT CONTAINS
MEMORY FUNCTION
The e2 classic memory function allows you to view your energy usage by the day, week or month. The e2 classic helps you understand your energy usage and how it changes over time.
DOWNLOAD YOUR DATA
Download your energy consumption data to your PC or Mac and analyse it with our efergy elink 2.0 software. View informative graphs, print or save reports as PDF files. Data may also be viewed using Excel.
Tom Bancroft
cost CO2Electricity
12:00 15:00 21:0018:0009:0006:0003:0000:00
2.410kg5.820kWh $0.82CostElectricity CO2
Wednesday, 15th September 2010
MonthsDays Years
Day total:
0.80kWh
0.20kWh
0.40kWh
0.60kWh
0.00kWh
Tuesday, 14th Thursday, 16th
1.00kWh
Your daily target
$ 2.00Currently over target
WIRELESS ENERGY MONITOR
Download your energy data to elink
Instantly see the cost of using energy in your home
Mains powered with battery back up for portability
View your daily, weekly, monthly or average data
Uses multiple tari� options
Discover and reduce your carbon footprint
Learn about energy with your family
Tari� rates pre-programmed (or updated manually)
SAVE UP TO 20% OFFYOUR ENERGY BILL*
www.elliesrenewable.co.za
Recommended