View
217
Download
0
Category
Preview:
Citation preview
7/28/2019 Metal Fab Combi
1/48
Every move counts.
Hilti. Outperform. Outlast.
Hilti solutionsfor metalfabricators
7/28/2019 Metal Fab Combi
2/482
7/28/2019 Metal Fab Combi
3/483
Overview
Hilti tuning for metal fabricators.When speed and efficiency count.
Always at the ready in the workshop Page 4 - 7
Are some of your tools always in need of repair? Are the right drill bits or
abrasive discs not at hand? With Hilti Fleet Management and our
comprehensive support you can be sure that all the Hilti products you
need are always available for use in the workshop.
Simply more flexibility for light-duty applications Page 8 - 11
Youre erecting a fence or railings but theres no electric power available
or you dont have the right anchors? With Hilti cordless tools and
injectable adhesive mortars, the right solution is always quickly at hand.
Save time with repetitive work Page 12 - 15
Would you like to make repetitive fastening jobs go 50% faster?
No problem when you avoid rebar hits and use the Hilti
HUS screw anchor system.
Always on the safe side Page 16 - 19
Do you loose sleep over particularly difficult jobs? Hilti has the right
fastening solution for every application and also supplies the tools
that let you work more safely.
Gratings fastened in seconds Page 21
How many persons does it take to fasten a grating? Hilti offers
three extremely quick one-man solutions.
The Hilti catalog for metal fabricators Page 23 - 47
All tools, accessories, consumables and ordering information for
the workshop or on site.
On the following pages youll find an overview of all Hilti products for these
areas of application relevant to the metal fabrication trade, from measuring
and alignment to cutting and grinding as well as drilling and fastening.
More information can be found online at www.hilti.com/metal_fabricators
In motor sports its often said that the
race is won or lost at the pit stops.
Perfect interplay between the team
and its equipment is thus essential if a
Formula 1 car is to be back on the
track within a few seconds.
The same applies to metal fabricators
on site and in the workshop. Thats why
Hilti offers a range of perfectly matched
high-performance tools, accessories and
unique services that meet all of your
needs. Team up with Hilti now and start
working with pit-stop efficiency.
7/28/2019 Metal Fab Combi
4/484
Were there when you need us.In person, online, by phone or at a Hilti Center.
Tip for metal fabricators
Hilti Online
At Hilti Online weve set up a web por-
tal specially for metal fabricators. Here
youll find everything that Hilti offers for
the workshop and on-site installation
jobs as well as comprehensive techni-
cal information, with round-the-clock
access to our online shop.
Simply register as a customer and you
can then order Hilti products at your
special terms and conditions a
mouse click is all it takes.
www.hilti.com/metal_fabricators
Pit-stop crews have to be able to rely
one hundred percent on their tools
and equipment if top performance is
to be achieved. This also means that
every item needed has to be quickly at
hand. A winning team, after all, simply
cant afford to make compromises.
But even the best tools may need servicing or repairs and consumables can run out
at the most untimely moment. Thats when the right services are decisive. Hiltis vari-
ous sales and service channels help to accelerate the necessary processes and avoid
idle time in the workshop or on site. And our service packages provide flexible solu-
tions tailored precisely to your requirements Fleet Management and Lifetime Service
are prime examples. No matter whether you choose to leave tool management up to
us or you prefer to own your equipment, you can rest assured that your Hilti tools will
be ready for use at all times with costs under complete control.
We bring our services to you
In the workshop or on site, your Hilti representative is at your service all times, bring-
ing the know-how and experience that will help you find the right Hilti product for your
needs.
Customer Service takes your orders
Hilti Customer Service can be reached by phone, free of charge, the whole working
day long. Our experienced staff provide competent advice and take your orders.
Delivery is generally the following day and an even faster delivery service is available
on request. Our Customer Service staff also make arrangements for the free-of-
charge pick up of defective tools to be returned for repair. Replacement tools are
made available on loan for the duration of the repair to customers who have conclud-
ed the appropriate service agreement.
The Hilti Center just round the corner
Its never far to your local Hilti Center. There youll find a whole range of tools and
consumables that you can purchase on the spot and take with you. Our specialists at
the Hilti Centers will be pleased to give you tips for the kinds of work that you dont
tackle every day and also check whether your Hilti tools are in need of servicing.
7/28/2019 Metal Fab Combi
5/48
In Formula 1 racing, changing tires
takes an average of only 2.9 seconds.
One of the things that make this possi-
ble is perfect logistics. Between 3,000and 4,000 tires are delivered to the pits
for just one race weekend. On top of
this, a further 20 tons of equipment
in about 8 truck loads is needed by
each team.
5
The best equipment atyour disposal
7/28/2019 Metal Fab Combi
6/486
No compromises in the workshop.
In the workshop, metal fabricators
work just like a pit-stop crew. The
quality of their work and the time
taken are crucial factors. In the
preparatory phase, everything has to
be done perfectly. Thats why metal
fabricators rely on Hilti quality in the
workshop too.
Just like Hiltis renowned rotary hammers
for on-site work, Hilti electric drills and
angle grinders also let you work more
cost-efficiently in the workshop and for
longer. These tools achieve higher per-
formance because theyre developed
together with our abrasive discs and
HSS drill bits to ensure a perfect match.
The complete range of Hilti cutting discs,
grinding discs and abrasive flap discs is
available in all sizes and grades. Our
standard and premium abrasive discs
offer consistent, high quality in all gradesand diameters while extra-long life and
fast drilling performance are the hall-
marks of Hilti HSS drill bits.
It pays to insist on Hilti consumables
not just because they provide the opti-
mum price-to-performance ratio, but
because Hilti quality knows no compro-
mises.
7/28/2019 Metal Fab Combi
7/487
Hilti solutions for theworkshop
Cutting, rough grinding and finishing
DAG 115-S, DAG 125, DEG 125, DEG 150 angle
grinders
There are Hilti angle grinders for all of your require-
ments, featuring top ergonomics and Hilti Smart
Power for constant cutting and grinding speed.
DAG 230-D angle grinder
The 2200 watt powerhouse for tough cutting and
grinding jobs on metal, featuring a quick-stop disc
brake for added safety and AVR for lower vibration.
AC-D cutting discs, AG-D grinding discs
A range of top-value, long-life discs in 115 -230 mm
diameters and various thicknesses and grades.
AF-D abrasive flap discs
For a high rate of removal, good surface finish and
extra-long life in jobs such as rust removal, debur-
ring and weld finishing.
Drilling in metal
SF 22-A cordless drill / driver
The handiest, most compact class-leading cordless
tool that drills faster and longer with unrivalled 22V
power and Li-ion battery capacity..
UD 30 drill
Extremely quick and rugged, with a top speed of
3,300 rpm in 2nd gear ideal for drilling in steel and
other metals.
HSS twist drills
Hilti smooth-shank twist drills deliver what they
promise in the fast-drilling, top-value standard ver-
sion or the heat-resistant cobalt version for hard
materials.
Details of tools and consumables, other products and ordering information can
be found in the Hilti catalog for metal fabricators or online at
www.hilti.com/metal_fabricators.
Hilti services for metal fabricators
Nothing is more troublesome than sudden equipment failure.
With Hilti Fleet Management, however, you always have fully
working tools at hand with costs under complete control. A
fixed monthly charge covers all tool, service and repair costs.
The monthly charge for a top-grade angle grinder, for exam-
ple, is no more than the price of a cinema ticket.
All tools are replaced at regular intervals with tools of the latestgeneration in order to ensure that they always comply with the
latest safety standards and to avoid costly idle time.
Please ask your Hilti representative for further information.
7/28/2019 Metal Fab Combi
8/488
With this complete range of cordless
tools and accessories for maximum
mobility in the workshop and on site
tools that take even the toughest jobs
in the metal fabrication trade in their
stride Hilti has taken lithium-ion bat-
tery technology into a new dimension.
Hilti Lithium CPC undeniably repre-
sents a breakthrough in battery tech-
nology and cordless tool power.
One charger for all tools
The Hilti range of cordless tools for metal fabricators covers all applications from
screwdriving and drilling in metal to setting HUS screw anchors.
Kick the cord!Cordless tools for metal fabricators.
Tip for metal fabricators:
Hilti Cordless Power Care
The voltage at each cell is controlled
separately to avoid overcharging,
overheating and deep discharge
Ready for use without delay very
fast first charge up to 75%
Half the weight of NiCd/NiMh bat-
teries of the same capacity
No self-discharge charged batter-
ies can be stored, ready for use at
any time
Work for longer with each charge
up to 100% higher capacity than
NiCd/NiMh batteries of the same
weight
Longer life expectancy
Charge state / warning LEDs
Unique Hilti Lifetime Service also for batteries and chargers
Metal fabricators who purchase a Hilti tool enjoy all the benefits of Hilti LifetimeService the unique service that covers all batteries, tools and chargers in the Hilti
CPC system. Hilti provides exceptional service and a manufacturers warranty for the
entire life of the product. And its even completely free of charge for up to the first two
years from the date of purchase. After that, Hilti continues to prove the quality of its
products by setting a repair cost limit. This means that you benefit from total reliability
with costs under complete control.
Forget the hassle of power cords, because Hilti Lithium CPC (Cordless Power Care)
brings even higher battery capacity, performance and impressively long battery life to
cordless tools with all the benefits of complete mobility in the workshop and on site.
14 V
SID 144-A
SIW 144-A
SF 144-A
SFH 144-A
22 V
SF 22-ASIW 22T-A
WSR 22-A
36 V
TE 6-A
36 V
TE 7-A
7/28/2019 Metal Fab Combi
9/48
7/28/2019 Metal Fab Combi
10/4810
Ready for anything.
Mechanics in motor racing are accus-
tomed to having to find the right solu-
tion quickly. Faced with the sudden
onset of rain, engine failure or elec-
tronics problems, theyre able to react
quickly and flexibly to unexpected sit-
uations as you can too when you
team up with Hilti.
Deviations from building plans, different
base materials, parts positioned close to
edges or other unforeseen problems
such as contact with rebars these are
some of the challenges often faced when
making fastenings during installation
work.
By providing versatile fastening solutions
such as Hilti HIT-MM PLUS universal
injectable adhesive mortar, Hilti makes
sure that you always have a reliable and
extremely cost-efficient anchor fastening
solution at hand for use on all materials.
With Hiltis broad range of powerful cord-
less tools for drilling and setting anchors
youre no longer reliant on electric power
outlets and in a position to enjoy all the
benefits of greater mobility without loss
of performance.
7/28/2019 Metal Fab Combi
11/4811
Hilti solutions for light-duty installation
Measuring, detecting
PD4 laser range meter
An extremely rugged, handy tool for easy measure-
ment of distances between 0.2 and 70 m.
PS 30 Ferrodetector
Lets you drill safely without fear of hitting rebars.
Detects and locates rebars as well as copper and
aluminium pipes in concrete and masonry at the
touch of a button.
Metalworking
SFH 144-A cordless drill / driver
The Li-ion powerhouse with the best performance-
to-weight ratio in the 14 V class ideal for all kinds
of installation work.
HSS twist drills
A broad range of smooth-shank twist drills for met-
als, available in the diameters 1 13 mm and work-
ing lengths up to 101 mm.
DAG 125-S angle grinder
Slim, robust and easily maneuverable the angle
grinder that takes a host of metalworking jobs in its
stride.
AC-D cutting discs
Ideal of installation work and good value for money,
AC-D cutting discs are available in 1 - 2.5 mm thick-
nesses.
Fastening
HRD framing anchor
With this plastic anchor you actually feel the differ-
ence in fastening quality in materials of virtually all
kinds.
HLC sleeve anchor
The good-value alternative for permanent or remov-
able fastenings, available in different versions with
various head forms. Suitable for presetting or
through-fastening techniques in all solid materials.
HUS-H 6 screw anchor system and SIW 144-A
cordless impact wrench
Drill, drive job done! This secure anchor with a
neat, attractive head can be driven in concrete
quickly with the SIW 144-A.
Hilti HIT-MM PLUS injectable adhesive mortar
The reliable, top-value solution for masonry and con-
crete. Quick and easy to use with anchor rods,
threaded rods and internally-threaded anchors. Mesh
sleeves are available for use in hollow materials.
Drilling in mineral materials
TE 6-A Li cordless rotary hammer
Extremely light in weight for a 36 V tool, the powerful
TE 6-A Li can be equipped with various chucks for
drilling in concrete, masonry and stone in diameters
up to 20 mm and in metals in diameters up to 13 mm.
TE-C hammer drill bits
The top-value alternative for fast drilling in concrete,
masonry and stone.
TE-C3X hammer drill bits
For even faster drilling and up to 30% longer life,
especially in heavily reinforced concrete.
Insulating, filling
CF 750-I insulating foam
The high-yield insulating and filling foam for use with
the CF-DS 1 d ispenser. Allows frequent pauses to be
made during application.
Details of tools and consumables, other products and ordering information can
be found in the Hilti catalog for metal fabricators or online at
www.hilti.com/metal_fabricators.
Hilti services for metal fabricators
Its important to us that youre able to continue working
even under unforeseen circumstances. Within the scope of
Hilti Fleet Management, you receive a replacement tool onloan in the event of need for repairs. You can also rent addi-
tional tools to cover peak periods.
7/28/2019 Metal Fab Combi
12/4812
Drilling inadvertently into rebars or
pipes can lead to big delays and the
need for costly repairs. But Hilti now
offers a simple and reliable solution to
this problem in the form of the PS 30
and PS 35 Ferrodetectors tools that
locate objects in concrete or masonry
before you start drilling. Delays and
high costs can thus be avoided, espe-
cially in jobs where a large number of
holes have to be drilled.
Rebars and metal pipes are two of the
hidden perils that metal fabricators face
in installation work. Experience shows
that unexpected contact is made with a
hidden object in almost every fifth hole
drilled in concrete. But rebar hits can
now be avoided, saving time and money,
simply by taking a quick look beneath
the surface of the concrete beforehand.
Or, even better, metal fabricators can
now take the position of metal objects
that could be troublesome when drilling
into account right at the fastening design
stage.
How do you find it?
Hilti has developed two detectors that
make scanning concrete or masonry very
quick and easy. When these tools are
moved across the surface of the
object to be checked, the areas
where drilling can take place safe-
ly are indicated automatically by asimple, clear display. The PS 30
Ferrodetector shows the position of
rebars as well as copper and aluminium
pipes while the PS 35 is also capable of
measuring the thickness of concrete
cover over rebars up to a depth of 120
mm. This makes it possible to determine
exactly whether anchors can be posi-
tioned directly over rebars or metal
pipes.
With these ruggedly built, easy-to-use
detectors, metal fabricators have no
trouble in finding all metal objects that
could present an obstacle to drilling.
The intelligent way to avoid rebars.No time lost in repetitive drilling jobs.
Tip for metal fabricators
The right way to drill
What do you do when theres no alter-
native but to drill through a rebar? Hilti
rotary hammers such as the TE 6-A
equipped with Hilti TE C3X hammer drill
bits with a solid carbide head can do
this relatively easily. The drilling opera-
tion, however, takes correspondingly
longer and is permissible only where it
has no influence on the statics of the
structure. When drilling into rebars its
important to ensure that no additional
pressure is applied the rotary hammer
should simply be guided. The hammer-
ing mechanism then maintains its full
impact energy and the drill bit doesnt
overheat excessively. This helps reduce
wear and tear and thus cut costs.
TE-C3X hammer drill bits take rebar hits in
their stride.
The DD EC-1 coring system for repetitive
drilling in heavily reinforced concrete.
It pays to take a quick look beneath thesurface with the PS 35 Ferrodetector.
7/28/2019 Metal Fab Combi
13/4813
Record times again andagain
Michael Schumacher holds the most
records in Formula 1 racing: He won 7
World Championship titles, 91 Grand
Prix races, started 68 times from the
pole position and set the fastest lap
time on 76 occasions.
The record for the fastest ever speed
reached in Formula 1 racing, however,
is held by the otherwise unknown
Brazilian Antonio Pizzonia who
reached a speed of 369.9 km/h driving
a Williams at Monza in 2004.
7/28/2019 Metal Fab Combi
14/4814
Top performance, time after time.
Every move counts not only in motor
racing, but also when it comes to
repetitive operations in installation
work. Theres simply no room for mis-
takes when pit stop crews change
tires. Equally so, metal fabricators
cant afford to slip up when installing
and fastening railings, canopies, hand
rails or brackets and supports for add-
ons.
The right choice of fastening solution is a
decisive factor. But no matter whether on
masonry, cracked or uncracked con-
crete, Hilti has a reliable time-saving fas-
tening solution consisting of the appro-
priate anchors, right tools and other aids
that will meet all of your requirements.
The Hilti system based on the HUS
screw anchor, for instance, makes time
savings of up to 50% possible compared
to repetitive fastening operations usingconventional stud anchors. You can ben-
efit from higher productivity by making
use of a coordinated system of tools and
components. The Hilti Ferrodetector
makes it possible to drill quickly and
repetitively with TE-C3X drill bits without
fear of hitting rebars while the power and
battery capacity of the SIW 22T-A lets
you drive the HUS anchor quickly, easily
and neatly.
7/28/2019 Metal Fab Combi
15/4815
Hilti solutionsfor installation work
Measuring, detecting, aligning
PD 4 laser range meter
For quick and efficient measurement of distances up
to 70 m by a single person.
PS 35 Ferrodetector
Avoids delays due to drilling into rebars and damage
to copper or aluminium pipes.
PMC 46 combilaser
For quick vertical and horizontal alignment indoors,
with all the accessories necessary for efficient one-
man operation.
PR 25 rotating laser
For quick alignment in the vertical, horizontal and
inclined planes, indoors and outdoors. With remote
control for easy adjustment of the laser beam.
Drilling, screwdriving, metalworking
SF 22-A cordless drill / driver
Low weight, top performance and battery capacity
for repetitive screw fastening applications and high-
speed drilling in metal.
HSS twist drills
Fast-drilling, heat-resistant cobalt twist drills for
extra-long life.
DAG 125-S angle grinder
Featuring Hilti Smart PowerTM technology for con-
stant cutting or grinding performance regardless of
the pressure applied.
AC-D cutting discs, AG-D grinding discs
Technically advanced abrasive discs with outstand-ing cutting and grinding characteristics combined
with long life.
Fastening
HSA and HST stud anchors
Reliable and well proven millions of times over.
Secure and easy to install, with ETA approval.
HST for cracked and uncracked concrete, HSA for
uncracked concrete and shallower depths of
embedment.
HUS screw anchor system and SIW 22T-A
tangential impact wrench
Up to 50% faster installation in repetitive fastening
applications compared to conventional stud anchor
systems. Approved for use in concrete. Good
appearance thanks to neat head.
Hilti HIT-MM PLUS injectable mortar and
MD 2500 dispenser
The inexpensive universal solution for fastenings in
the majority of mineral materials.
Hilti HIT-HY 70 and Hilti HIT-HY 150-MAX
Drill clean inject fasten: The convenient
approved solution for highest load values (HIT-HY 70
for uncracked concrete and masonry, HIT-HY 150-
MAX for concrete).
Details of tools and consumables, other products and ordering information can
be found in the Hilti catalog for metal fabricators or online at
www.hilti.com/metal_fabricators.
Drilling in mineral materials
TE 6-A Li cordless rotary hammer
Full 36 V Li-ion battery power from the first to the
last hole (up to 20 mm dia.). Effortless overhead
drilling thanks to low weight.
TE-C3X hammer drill bits
In multipacks at an attractive price. For fast d rilling,
even through rebars, and up to 30% longer life.
Hilti Service for metal fabricators
Tips and tricks for professionals from professionals in a
Hilti training course for metal fabricators. You and your
team will learn all about choosing the right anchor, abouthow anchors function and about installation of different
anchor systems in various materials in compliance with
approval requirements.
7/28/2019 Metal Fab Combi
16/4816
Secure fastening at a glance.Hilti anchor solutions for all materials.
Tip for metal fabricators
Hilti PROFIS Anchor
Select and design anchor fastenings with Hilti
PROFIS Anchor the quick and easy-to-use
PC application that makes all the
calculations required for secure andreliable anchor fastenings.
Download it now from
www.hilti.com/metal_fabricators
HUS-H and HUS-R screw anchors
Electrogalvanized or stainless steel
For concrete and masonry, indoors or
outdoors
ETA approval for use in cracked and
uncracked concrete
Time-saving installation through
in-place parts, 3 depths of embedment
Neat hex. head for good appearance
HRD frame anchor
Plastic anchor for use in all mineral
materials
For light-duty fastening applications
indoors and outdoors
Easy through-fastening
Various head types and lengthsavailable
HLC sleeve anchor
For temporary and permanent
fastenings in concrete, solid brick,
sand-lime block and concrete block
Suitable for low to medium loads
Easy through-fastening
Various head types available
HST stud anchor
For cracked and uncracked concrete,
hard natural stone, in various corrosion
resistance classes for indoor and out-
door use
ETA approval for use in cracked and
uncracked concrete
Easy to install using the Hilti setting
tool
In M8 to M24 sizes and various lengths
HSA stud anchor
For uncracked concrete, in various
corrosion resistance classes for indoor
and outdoor use
ETA approval for use in uncracked
concrete Easy to install using the Hilti setting
tool, 2 depths of embedment
In M8 to M24 sizes and various lengths
Hilti HIT-HY 150 MAX injectable mortar
Approved for use with HIT-V and
HIT-TZ anchor rods and HIS threaded
sleeves in cracked and uncracked
concrete
Various depths of embedment possiblewith HIT-V anchor rods
Takes up very high loads without
expansion forces
Hilti HIT-HY 70 injectable mortar
Approved for use in uncracked con-
crete, hollow and solid brick and cellu-
lar concrete Takes up very high loads without
expansion forces
Mesh sleeves for flexible depths of
embedment in hollow block masonry
Hilti HIT-MM PLUS injectable mortar
The universal solution for light-duty
fastenings in concrete and masonry
Mechanical anchors Chemical anchors
7/28/2019 Metal Fab Combi
17/4817
Winners put safety first
Serious accidents in the 90s revolution-
ized safety in motor racing. A Formula
1 car now has to pass 15 loading tests,
in which the monocoque must remain
completely intact, before receiving
approval. Elastic, shock-absorbing sys-
tems provide additional protection for
the drivers head, neck and areas inside
the cockpit. The sides of the drivers
compartment are now reinforced with a
material used in the manufacture of
bulletproof vests, which prevents for-
eign objects penetrating the cockpit.
7/28/2019 Metal Fab Combi
18/4818
Always on the safe side.
In motor racing, great efforts have
been made in recent years to make
the cars and the race tracks safer. We
are also convinced that only a safe
jobsite can be a truly productive job-
site. Accordingly, Hilti has been very
successful in its endeavors to achieve
greater safety in every aspect.
Especially where heavy applications are
concerned, metal fabricators can count
on the features incorporated in Hilti tools
for the protection of the user as well as
the high levels of safety offered by Hilti
fastening solutions.
Accidents in the workshop or on site not
only present a risk of injury, they also
delay completion of the job. Hilti there-
fore concentrates on making its tools,
and thus the applications for which they
are used, as safe as possible. Unique
innovations in this field, such as ActiveVibration Reduction (AVR), have therefore
already become standard in Hilti combi-
hammers and breakers.
The Active Torque Control (ATC) system
incorporated in Hilti angle grinders stops
the tool in a fraction of a second in
potentially risky situations where the disc
could stick and stall. Non-slip grip areas
and soft-grip side handles also help to
provide a secure hold and further reduce
vibration. Further examples of the contri-
bution we make to your safety, and thus
to higher productivity, can be found at
www.hilti.com/safety. Please ask your
Hilti representative or at your nearest Hilti
Center for more information about spe-
cial Hilti safety training courses.
7/28/2019 Metal Fab Combi
19/4819
Heavy-duty fasteningwith Hilti
Measuring, detecting, aligning
PD 42 laser range meter
With built-in optical sight ideal for outdoor use.
PMC 46 combilaser
For quick alignment work indoors and tasks such as
transferring measurement marks to ceilings.
PR 25 rotating laser
Ideal for indoor and outdoor alignment work, fea-
tures Auto Alignment SystemTM laser control.
PS 35 Ferrodetector
Measures the depth of concrete cover over rebars or
detects and locates rebars and copper or aluminium
pipes to allow drilling in concrete or masonry to be
carried out quickly and safely..
Drilling, screwdriving, metalworking
SF 22-A cordless drill / driver
22 V power in a compact, convenient ergonomic
design for easy, reliable screwdriving even in tight
corners.
HSS twist drills
High-performance, long-life cobalt twist drills in
4 practical sets for installation work.
DAG 125-S angle grinder
Features ATC for safer cutting and grinding: the tool
stops as soon as the disc begins to stick.
AC-D cutting discs
Glass-fiber reinforced for high resistance to breakage.
Drilling in mineral materials
TE 30-C-AVR rotary hammer
The all-rounder with AVR. Ideal for installation work
including drilling anchor holes up to 28 mm and light
chiseling.
TE-7-A Li cordless rotary hammer
With the performance and staying power of a top
corded tool, for drilling in steel, masonry and con-
crete up to max. 24 mm dia. and in metal up to 13
mm dia. Can be fitted with a self-contained dust
removal attachment (no cord or hose) for virtually
dustless drilling.
TE-C3X hammer drill bits
Featuring the gradient technology for better shock
absorption at the head when drilling into rebars in
concrete: longer life, safer drilling, higher working
comfort and better wear resistance.
Fastening
HST stud anchor
Approved for use in cracked and uncracked concrete,
takes up high loads thanks to special segments that
ensure reliable follow-up expansion.
HUS screw anchor system and SIW 22T-A
cordless impact wrench
The perfectly coordinated screw anchor system for
quick, secure through-fastening with high load
values even when set close to edges and closely
spaced.
Hilti HIT-HY 70 injectable mortar
Secure and approved for fastenings in uncracked
concrete and masonry, various depths of embed-
ment possible with extendible mesh sleeves.
Hilti HIT-HY 150-MAX injectable mortar with HIT-V
anchor rodsFor a secure hold with highest load values the
approved fastening system for use in cracked and
uncracked concrete.
Details of tools and consumables, other products and ordering information can
be found in the Hilti catalog for metal fabricators or online at
www.hilti.com/metal_fabricators
Hilti Service for metal fabricators
HIT-V anchor rods with
Hilti HIT-HY 150-MAX
the approved fasteningsystem that keeps you
on the safe side despite
cost savings thanks to
variable setting depths.
kgkgkg
7/28/2019 Metal Fab Combi
20/48
A Formula 1 car accelerates from 0
100 km/h in 2.5 seconds and, on the
other hand, takes only 1.9 seconds to
come to a standstill from 200 km/h
under full braking power. This causesthe drivers body to be pressed into his
safety harness with a force equal to 5
times his own body weight and the
brake discs reach a temperature of
800C within one second.
20
7/28/2019 Metal Fab Combi
21/4821
Grating and checkerplate fastening systems
A choice of two solutions with the Hilti direct fastening system: the DX 460-GR
or the DX 76 PTR with GR equipment for use indoors and outdoors (slightly cor-
rosive environments)
Direct fastening in seconds.Quick, easy and secure no power cords, no welding.
X-FCM-M removable grating disc and
X-CR M8 threaded stud
Robust and reliable: The high-grade,
vibration-resistant grating fastening
Efficient: Threaded studs are driven
into the steel supports with a DX tool
and grating fastening discs then
screwed on and tightened using a
cordless screwdriver such as the Hilti
SF 144-A
X-GR RU removable grating fastener
Quick: The preassembled fastener rais-
es productivity, making up to 240 fas-
tenings per hour possible with the
DX 460-GR fastening tool
Convenient: The grating height is
shown on the fastener
Secure: Two supporting arms ensure
90 fastening with high resistance to
vibration
The X-MGR manual fastener for use in
slightly corrosive environments
Convenient: Even narrow-mesh
gratings can be fastened from above
by a single person
Efficient: Up to 180 fastenings per
hour can be made from the top side of
the grating using a cordless screwdriv-
er such as the Hilti SF 144-A
Versatile: Suitable for various grating
heights, can be removed and reused
Details of tools and consumables, other products and ordering information can
be found in the Hilti catalog for metal fabricators or online at
www.hilti.com/metal_fabricators.
Higher speed on profile metal sheets
The DX 76-PTR powder-actuated fastening tool and the X-ENP nail are key elements
of the highly efficient and approved Hilti system for fastening profile metal sheets on
steel supports. Hilti can also take you comfortably up to maximum screwdriving
speed with collated self-drilling screws for overlap joints and special screwdrivers for
the metal fabrication trade including the SDT 30 the innovative stand-up screwdriv-
ing tool that makes fastening roofing sheets quicker and more convenient than ever.
Ask your Hilti representative for further information or call Customer Service on 0000-
000 00 00.
7/28/2019 Metal Fab Combi
22/4822
Great services thechoice is yours
Outstanding services for a
product lifetime.
The unique service package for those
who prefer to own their tools.
Hilti tools are built to last. But even if a defect occurs, Hilti will take care of
it. Quickly and professionally, for up to 2 years completely free of charge.
After that we continue to prove the quality of our products by putting a limit
on what a repair can cost for as long as you continue using your Hilti tool.
We even give you a lifetime manufacturers warranty against manufacturing
defects. Thats not just reassuring to know, its unique in this field.
We manage your tools.
So you can manage your business.
With Hilti Fleet Management, a fixed monthly charge covers all tool, service
and repair costs. That greatly simplifies your financial planning and takes a
load of administrative work off your shoulders. There are no hidden costs.
All tools in the fleet are replaced at regular intervals with tools of the latest
generation, thus helping to avoid costly downtime and ensuring compli-
ance with the latest safety standards.
NOCOSTS
MANUFACTURERS
WARRANTYREPAIRCOST LIMIT
LIFETIME
SERVICE
2Yearsup to
LifetimeLifetime
7/28/2019 Metal Fab Combi
23/4823
The Hilti catalog formetal fabricators.
Hilti. Outperform. Outlast.
Orderinginformation
7/28/2019 Metal Fab Combi
24/48
In motor sports, races are won and lost at the pit stops. Perfect interplay between
the team and its equipment is thus essential. Thats why Hilti offers metal fabricators
a range of perfectly matched high-performance tools and accessories for a wide
range of jobs in the workshop and on site, including measuring and alignment,
metalworking, drilling and fastening on mineral materials all in record time.
Measuring, aligning and detecting Page 25
Cutting, rough grinding and finishing Page 26
Drilling and screwdriving in metal Page 29
Drilling in mineral materials Page 33
Fastening on mineral materials Pages 35 - 43
Mechanical anchors
Chemical anchors
Fastening gratings Page 44
Filling and insulating Page 45
Selection of tools and anchors Page 46
24
Content
Every move counts.
7/28/2019 Metal Fab Combi
25/4825
Ordering information for metal fabricators
Measuring, aligning and detecting
Measuring
Ordering designation Package contents Item no.
PD 4 laser range meter 1 202416
PD 42 laser range meter with optical sight 1 320286
Detecting
Ordering designation Package contents Item no.
PS 30 Ferrodetector for locating steel rebars, copper and aluminium pipes 1 407920
PS 35 Ferrodetector for locating steel rebars, copper and aluminium pipes, and measuring depth of concrete cover 1 407959
Aligning
Ordering designation Package contents Item no.
PMC 46 combilaser with universal adapter and tripod 1 411210
PR 25 rotating laser with laser receiver 1 233852PRA 70 wall mount for the PR 25 1 285314
PA 931 crank tripod for the PR 25 1 315998
Further tools and accessories for measuring, detecting and aligning are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
26/4826
Ordering information for metal fabricators
Cutting, rough grinding and finishing
Angle grinders
Ordering designation Package contents Item no.
DAG 115-S angle grinder 1 211895
DAG 125-S angle grinder 1 382583
DEG 150-P angle grinder with lockable switch 1 285944
DAG 230-D angle grinder 1 000000
Angle grinder accessories
Ordering designation Package contents Item no.
Quick-locking nut, flat, Kwik-Lock nut for all angle grinders 1 033685
Protective cover DAG 115-S 1 341362
Protective cover 125 341429
Protective cover 150 341430
Protective cover 230 005471
Goggles I-VO 805 PS clear 285780
AF-D abrasive flap discs for 22.2 mm arbor
Disc dia. (mm) Grit Ordering designation Package contents Item no.
115 40 AF-D 115U/40A resin fibre flap disc 10 047843
115 60 AF-D 115U/60A resin fibre flap disc 10 047844
115 80 AF-D 115U/80A resin fibre flap disc 10 047846
125 40 AF-D 125U/40A resin fibre flap disc 10 047848
125 60 AF-D 125U/60A resin fibre flap disc 10 047850
125 80 AF-D 125U/80A resin fibre flap disc 10 047851
150 40 AF-D 150U/40A resin fibre flap disc 10 047853
150 60 AF-D 150U/60A resin fibre flap disc 10 047854
150 80 AF-D 150U/80A resin fibre flap disc 10 047861
AC-D cutting discs for 22.2 mm arbor
Disc dia. (mm) Disc thick- Type Ordering designation Package contents Item no.ness (mm)
115 1.0 UP AC-D 115 Inox UP 25 361893
125 1.0 UP AC-D 125 Inox UP 25 361894
150 1.0 UP AC-D 150 Inox UP 25 361895
230 1.8 UP AC-D 230 Inox UP 25 361897
115 2.5 UP AC-D 115 UP 25 361875
125 2.5 UP AC-D 125 UP 25 361876150 2.5 UP AC-D 150 UP 25 361877
230 2.5 UP AC-D 230 UP 25 361879
115 1.0 USP AC-D 115 Inox USP 25 361885
125 1.0 USP AC-D 125 Inox USP 25 361887
150 1.0 USP AC-D 150 Inox USP 25 361889
230 1.8 USP AC-D 230 Inox USP 25 361892
115 2.5 USP AC-D 115 USP 25 361880
125 2.5 USP AC-D 125 USP 25 361881
150 2.5 USP AC-D 150 USP 25 361882
230 2.0 USP AC-D 230 USP 25 277251
Further cutting discs are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
27/4827
Ordering information for metal fabricators
AG-D grinding discs for 22.5 arbor
Disc dia. (mm) Disc thick- Type Ordering designation Package contents Item no.ness (mm)
115 6.4 UP AG-D 115 UP 10 361898
125 6.4 UP AG-D 125 UP 10 361899
150 6.4 UP AG-D 150 UP 10 361900
230 6.4 UP AG-D 230 UP 10 361902115 6.4 USP AG-D 115 USP 10 361903
125 6.4 USP AG-D 125 USP 10 361904
150 6.4 USP AG-D 150 USP 10 361905
230 6.4 USP AG-D 230 USP 10 361907
Further grinding discs are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
Hilti abrasive discs for uncompromising quality
UP = Universal Premium the outstanding universal abrasive discs for all metals except stainless steel
USP = Universal Super Premium High-performance abrasive discs for all metals including stainless steel
INOX = Extra-thin, long-life cutting discs for sheet metal and stainless steel
7/28/2019 Metal Fab Combi
28/48
Hilti abrasive
discs for metal
fabricators
Hot discs set thepace.
Hilti. Outperform. Outlast.
Working on steel and other metals
with Hilti abrasive discs is like lead-
ing a race from start to finish. Their
aggressive cutting action, high rate
of material removal and extra-long
life boost your efficiency and speed
up all kinds of cutting, rough grinding
or finishing jobs in the workshop andon site. Try them now!
www.hilti.com/metal_fabricators
Hilti Corporation I 9494 Schaan I Liechtenstein I P +423-234 2111 I F +423-234 2965 I www.hilti.com
7/28/2019 Metal Fab Combi
29/4829
Ordering information for metal fabricators
Drilling and screwdriving in metal
Tool sets for metal fabricators
Ordering designation Package contents Item no.
SF 144-A cordless drill driver + SIW 144-A cordless impact wrench, set 1 000000
With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, BBP Uni bit set and
S-NSD 1/2" - 13L socket wrench insert set
SFH 144-A cordless hammer drill driver + SIW 144-A cordless impact wrench, set 1 000000
With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, BBP Uni bit set and
S-NSD 1/2"-13L socket wrench insert set
Drills
Ordering designation Package contents Item no.
UD 30 drill 1 211974
Cordless drill drivers and cordless hammer drill drivers
Ordering designation Package contents Item no.
SF 144-A cordless drill driver 1 355412
With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, 6-piece HSS drill bit set
SFH 144-A cordless hammer drill driver 1 355414
With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, 6-piece HSS drill bit set
SF 22-A cordless drill driver 1 000000
With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, HSS drill bit set 1 - 10
SFH 22-A cordless hammer drill driver 1 000000
With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, HSS drill bit set 1 - 10
Cordless impact screwdrivers and wrenches
Ordering designation Package contents Item no.
SID 144-A cordless impact screwdriver, set with two 2.6 Ah Li-ion batteries 1 272828With 1/4" hex drive, for driving the HUS screw anchor in 6 mm holes andthe countersunk-head HRD framing anchor in sizes up to 10 mm dia.
With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger and S-NSD light-duty set
SIW 144-A cordless impact wrench, set with two 2.6 Ah Li-ion batteries 1 000000
With 1/2" square drive, for driving the HUS screw anchor in 6 mm holes and
the hex-head HRD framing anchor in sizes up to 10 mm dia.
With two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, S-NSD 13-15 socket wrench insert set
SIW 22T-A cordless impact wrench 1 000000
With 1/2" square drive, for driving the HUS-H and HR screw anchor in 8 14 mm sizes
With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, two S-NSD 1/2" 13, two S-NSD 1/2" 15
Battery accessories
Ordering designation Package contents Item no.
B 144 2.6 Li-ion batteryfor SF 144-A. SFH 144-A, SID 144-A and SIW 144-A 1 273114
B 22 2.6 Li-ion batteryfor SF 22-A, SFH 22-A, SIW 22T-A 1 270838
C 4/36-ACS Li TPS charger for Li-ion batteries 1 272442
HSS twist drill sets
Ordering designation Package contents Item no.
HSS twist drill set 2 8, diameters 2 8 mm in 1 mm increments 6 213950
HSS cobalt drill set 1 10, diameters 1 10 mm in 0.5 mm increments 19 304981
HSS cobalt drill set 1 13, diameters 1 13 mm in 0.5 mm increments 25 304982
HSS drill set 1 10, diameters 1 10 mm in 0.5 mm increments 19 304938
HSS drill set 1 13, diameters 1 13 mm in 0.5 mm increments 25 304939
HSS drill set 1 10, diameters 1 10 mm in 1 mm increments 10 405312
7/28/2019 Metal Fab Combi
30/4830
Ordering information for metal fabricators
HSS cobalt twist drills
Ordering designation Drill bit dia. (mm) Working length (mm) Package contents Item no.
HSS cobalt twist drill 1.0x34 1.0 34 10 304941
HSS cobalt twist drill 2.5x57 2.5 57 10 304945
HSS cobalt twist drill 3.0x61 3.0 61 10 304946
HSS cobalt twist drill 3.2x65 3.2 65 10 304947
HSS cobalt twist drill 3.5x70 3.5 70 10 304951
HSS cobalt twist drill 4.0x75 4.0 75 10 304953
HSS cobalt twist drill 4.2x75 4.2 75 10 304955
HSS cobalt twist drill 5.0x86 5.0 86 10 304959
HSS cobalt twist drill 5.2x86 5.2 86 10 304960
HSS cobalt twist drill 5.5x93 5.5 93 10 304963
HSS cobalt twist drill 5.7x93 5.7 93 10 304964
HSS cobalt twist drill 6.0x93 6.0 93 10 304966
HSS cobalt twist drill 6.5x101 6.5 101 10 304967
HSS cobalt twist drill 7.0x109 7.0 109 10 304968
HSS cobalt twist drill 8.0x117 8.0 117 10 304970
HSS cobalt twist drill 8.5x117 8.5 117 10 304971HSS cobalt twist drill 10.0x133 10.0 133 10 304974
HSS cobalt twist drill 10.5x133 10.5 133 10 304975
HSS cobalt twist drill 11.0x142 11.0 142 10 304976
HSS cobalt twist drill 11.5x142 11.5 142 10 304977
HSS cobalt twist drill 12.0x151 12.0 151 10 304978
HSS cobalt twist drill 13.0x151 13.0 151 10 304980
Further diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HSS standard twist drills
Ordering designation Drill bit dia. (mm) Working length (mm) Package contents Item no.
HSS twist drill 1.0x34 1.0 34 10 304898
HSS twist drill 2.5x57 2.5 57 10 304902HSS twist drill 3.0x61 3.0 61 10 304903
HSS twist drill 3.2x65 3.2 65 10 304904
HSS twist drill 3.5x70 3.5 70 10 304908
HSS twist drill 4.0x75 4.0 75 10 304910
HSS twist drill 4.2x75 4.2 75 10 304912
HSS twist drill 5.0x86 5.0 86 10 304916
HSS twist drill 5.2x86 5.2 86 10 304917
HSS twist drill 5.5x93 5.5 93 10 304920
HSS twist drill 5.5x125 5.5 125 10 383780
HSS twist drill 5.5x175 5.5 175 10 383781
HSS twist drill 5.7x93 5.7 93 10 304921
HSS twist drill 5.7x125 5.7 125 10 383784
HSS twist drill 5.7x175 5.7 175 10 383785
HSS twist drill 6.0x93 6.0 93 10 304923
HSS twist drill 6.5x101 6.5 101 10 304924
HSS twist drill 7.0x109 7.0 109 10 304925
HSS twist drill 8.0x117 8.0 117 10 304927
HSS twist drill 8.5x117 8.5 117 10 304928
HSS twist drill 10.0x133 10.0 133 10 304931
HSS twist drill 10.3x133 10.3 133 10 304932
HSS twist drill 11.0x142 11.0 142 10 304933
HSS twist drill 11.5x142 11.5 142 10 304934
HSS twist drill 12.0x151 12.0 151 10 304935Further diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
31/4831
Ordering information for metal fabricators
HSS stepped drill bits
Ordering designation Dia. (mm) Package contents Item no.
Stepped drill bit 6 30 6 - 30 1 287030
Stepped drill bit 4 20 4 - 20 1 304983
Stepped drill bit M10 M40 8.5 40.5 1 304984
HSS countersinking bit
Ordering designation Dia. (mm) Package contents Item no.
Countersinking bit 90 12.4 1 283872
MetalCut bimetal hole saws
Ordering designation Dia. (mm) Package contents Item no.
Bimetal hole saw 22 MetalCut 22 1 203994
Bimetal hole saw 25 MetalCut 25 1 203995
Bimetal hole saw 35 MetalCut 35 1 203998
Bimetal hole saw 40 MetalCut 40 1 204120Bimetal hole saw 51 MetalCut 51 1 206012
Bimetal hole saw 68 MetalCut 68 1 206039
Further bimetal hole saws and accessories are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
Cutting oil
Ordering designation Package contents Item no.
MC cutting oil 100 ml for drilling in metal 1 211981
Torx bits
Ordering designation Package contents Item no.
S-BS TX bit dispenser with bit holder and Torx 10, 15, 20, 25, 30, 40 1 258698
S-B-TX 30 T screwdriver bit 10 258144
S-B-TX 40 screwdriver bit 10 258146
Further individual bits and bit sets are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
Bit holder for 1/4" bits
Ordering designation Length (mm) Package contents Item no.
S-BH-50 M bit holder 50 1 257257
Further bit holders in various lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
1/4" S-B NS socket wrench inserts with 1/4" square drive, for driving hex. head screws
Ordering designation Size AF (mm) Package contents Item no.
S-B 1/4 NS7 socket wrench insert 7 1 236342
S-B 1/4 NS8 socket wrench insert 8 1 236343
S-B 1/4 NS10 socket wrench insert 10 1 236344
S-B 1/4 NS11 socket wrench insert 11 1 236345
S-B 1/4 NS12 socket wrench insert 12 1 236346
S-B 1/4 NS13 socket wrench insert 13 1 236347
S-B-NS17 socket wrench insert 17 1 080231
Adapters and extensions for socket wrench inserts are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
32/4832
Ordering information for metal fabricators
1/2" S-NSD socket wrench inserts with 1/2" square drive, for driving hex. head screws
Ordering designation Size AF (mm) Package contents Item no.
S-NSD set medium duty HUS for HUS 8 and HUS 10 screw anchors 13, 15 4 408429
S-NSD set light duty HUS for HUS 6 and HUS 8 screw anchors 4084303x SNSD 1/2" 13, bit holder S-BH 28 1/2" 1/4", S-B-TX 30, S-B-TX 40
S-NSD 1/2"-8 L socket wrench insert for M5 8 1 408413
S-NSD 1/2"-10 L socket wrench insert for HLC-H8 sleeve anchor 10 1 408414
S-NSD 1/2"-12 L socket wrench insert 12 1 408415
S-NSD 1/2"-13 L socket wrench insert for HUS 6 and HUS 8 -H8 screw anchors 13 1 408416
S-NSD 1/2"-15 L socket wrench insert for HUS 10 screw anchor 15 1 408417S-NSD 1/2"-16 L socket wrench insert for M10 16 1 404418
S-NSD 1/2"-17 L socket wrench insert for HLC-H 12 sleeve anchor 17 1 404419
S-NSD 1/2"-18 L socket wrench insert for M12 18 1 404420
S-NSD 1/2"-19 L socket wrench insert for M12 19 1 408421
S-NSD 1/2"-21 L socket wrench insert for HUS 14 screw anchor 21 1 404422
S-NSD 1/2"-22 L socket wrench insert for M14 22 1 404423
S-NSD 1/2"-24 L socket wrench insert for M16 24 1 404424
S-NSD 1/2"-27 L socket wrench insert for M18 27 1 404425
S-NSD 1/2"-30 L socket wrench insert for M20 30 1 404426
Further socket wrench inserts, adapters and extensions are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
Adapters for socket wrench inserts
Ordering designation Package contents Item no.
S-NSD 1/2 - 3/4" adapter adapts 1/2" square drive to 3/4" square drive 1 375859
S-NSD 1/2 - 3/8" adapter adapts 1/2" square drive to 3/8" square drive 1 375858
S-BH 1/2 1/4" bit holder adapts 1/2" square drive to 1/4" hex. drive 1 369096
S-NSD 3/8" x 50 adapter adapts 1/4" hex. drive to 3/8" square drive 1 236339
1/2" square drive extensions
Ordering designation Length (mm) Package contents Item no.
S-NSD 1/2 - 5" extension 125 1 385942S-NSD 30 deg universal adapter 1 386059
3/8" S-B NS socket wrench inserts with 3/8" square drive, for driving hex. head screws
Ordering designation Size AF (mm) Package contents Item no.
S-B 3/8" NS10 socket wrench insert 10 1 236350
S-B 3/8" NS13 socket wrench insert 13 1 236354
S-B 3/8" NS17 socket wrench insert 17 1 236355
S-B 3/7" NS19 socket wrench insert 19 1 236356
Adapters and extensions for socket wrench inserts are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
33/4833
Ordering information for metal fabricators
Drilling in mineral materials
Tool sets for metal fabricators
Ordering designation Package contents Item no.
TE 6-A cordless rotary hammer + SF 144-A cordless drill driver, set 1 360543With B36 2.4 Ah battery and two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger,
TE-C3X drill bit set M1 and SBP Uni bit set
TE 6-A cordless rotary hammer + SFH 144-A cordless hammer drill driver, set 1 360547
With B36 2.4 Ah battery and two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger,
TE-C3X drill bit set M1 and SBP Uni bit set
TE 6-A cordless rotary hammer + SID 144-A cordless impact screwdriver, set 1 360551
With B36 2.4 Ah battery and two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger,
TE-C3X drill bit set M1 and SBP Uni bit set
TE 6-A cordless rotary hammer + SIW 144-A cordless wrench, set 1 000000
With B36 2.4 Ah battery and two B 144 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger,
TE-C3X drill bit set M1 and S-NSD 1/2" -13L socket wrench insert set
Cordless rotary hammersOrdering designation Package contents Item no.
TE 6-A cordless rotary hammer 1 203598
With B36 2.4 Ah battery, C 4/36-ACS Li TPS charger, TE-C3X drill bit set M1
TE 7-A cordless rotary hammer 1 203603
With B36 3.3 Ah battery, C 4/36-ACS Li TPS charger, TE-C3X drill bit set M1
Cordless tool accessories
Ordering designation Package contents Item no.
B36 2.6 Ah Li-ion batteryfor the TE 6-A 1 272915
B36 3.3 Ah Li-ion batteryfor the TE 7-A 1 401394
C 4/36-ACS Li TPS charger for Li-ion batteries 1 272442
TE 2-M / TE 7-A NG chuck complete SDS-plus for TE 6-A Li, TE 7-A Li 1 273118
TE 2M/7C/7A/6A keyless chuck for drill bits with smooth shanks up to 13 mm dia. 1 224119
Rotary hammers
Ordering designation Package contents Item no.
TE 7-C rotary hammer set with TE C3X drill bit set M1 1 365652
TE 7-C DRS rotary hammer set with TE DRS-M dust removal attachment and TE-C3X drill bit set M1 1 365653
TE 30 rotary hammer set with TE-C3X drill bit set M1 1 402582
TE 30-C-AVR rotary hammer set with chiseling function and TE-C3X drill bit set M1 1 402593
TE-C3X premium drill bit setsOrdering designation Package contents Item no.
TE-C3X (6) M1 hammer drill bit set with 6 TE-C3X drill bits 5 12 mm dia. 1 206628
TE-C3X (12) L1 hammer drill bit set with 12 TE-C3X drill bits 5 10 mm dia. 1 206631
TE-C3X (12) L2 hammer drill bit set with 12 TE-C3X drill bits 5 16 mm dia. 1 206628
7/28/2019 Metal Fab Combi
34/4834
Ordering information for metal fabricators
TE-C3X hammer drill bits in multipacks
Ordering designation Drill bit dia. (mm) Working length (mm) Package contents Item no.
TE-C3X 6/17 MP6 6 100 6 206585
TE-C3X 6/17 MP12 6 100 12 306601
TE-C3X 6/17 MP24 6 100 24 206619
TE-C3X 6/22 MP6 6 150 6 206586
TE-C3X 6/22 MP12 6 150 12 206602
TE-C3X 6/22 MP24 6 150 24 206620
TE-C3X 8/17 MP6 8 100 6 206589
TE-C3X 8/17 MP12 8 100 12 206604
TE-C3X 8/17 MP24 8 100 24 206622
TE-C3X 8/22 MP6 8 150 6 206590
TE-C3X 8/22 MP12 8 150 12 206605
TE-C3X 8/22 MP24 8 150 24 206623
TE-C3X 10/17 MP6 10 100 6 206592
TE-C3X 10/17 MP12 10 100 12 206607
TE-C3X 10/17 MP24 10 100 24 206625
TE-C3X 10/22 MP6 10 150 6 206593TE-C3X 10/22 MP12 10 150 12 206608
TE-C3X 10/22 MP24 10 150 24 206626
TE-C3X 12/17 MP6 12 100 6 206612
TE-C3X 12/17 MP12 12 100 12 206610
TE-C3X 12/17 MP24 12 100 24 206577
TE-C3X 12/22 MP6 12 150 6 206613
TE-C3X 12/22 MP12 12 150 12 206611
TE-C3X 12/22 MP24 12 150 24 206578
TE-C3X 12/27 MP6 12 200 6 206614
TE-C3X 12/27 MP12 12 200 12 202870
Individual drill bits, further multipacks and other diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
TE-C hammer drill bits in multipacks
Ordering designation Drill bit dia. (mm) Working length (mm) Package contents Item no.
TE-C 8/17 MP6 8 100 6 383128
TE-C 8/17 MP12 8 100 12 383141
TE-C 8/22 MP6 8 150 6 383129
TE-C 8/22 MP12 8 150 12 383142
TE-C 10/17 MP6 10 100 6 383131
TE-C 10/17 MP12 10 100 12 383144
TE-C 10/22 MP6 10 150 6 383132
TE-C 10/22 MP12 10 150 12 383145
TE-C 12/17 MP6 12 100 6 383078
TE-C 12/17 MP12 12 100 12 383087
TE-C 12/22 MP6 12 150 6 383079
TE-C 12/22 MP12 12 150 12 383088
TE-C 14/22 MP12 14 150 12 383091
TE-C 14/32 MP12 14 250 12 383092
TE-C 16/22 MP12 16 150 12 383094
TE-C 16/32 MP12 16 250 12 383095
Individual drill bits, further multipacks and other diameters and working lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
35/4835
Ordering information for metal fabricators
Fastening on mineral materials
Mechanical anchors: stud and segment anchors
HST stud anchor, galvanized For concrete and hard natural stone With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Fixture thickness (mm) Package contents Item no.
HST M8x75/10 8 10 100 371581
HST M8x75/10 BW 8 10 100 379378
HST M8x95/30 8 30 100 295378
HST M10x90/10 10 10 50 371584
HST M10x90/10 BW 10 10 25 379379
HST M10x100/20 10 20 50 371879
HST M10x110/30 10 30 40 295387
HST M12x115/20 12 20 25 371587
HST M12x145/50 12 50 25 371588
HST M12x185/90 12 90 25 371589HST M16x140/25 16 25 12 371593
HST M16x165/50 16 50 12 371594
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HST-R stud anchor, A4 stainless steel For concrete and hard natural stone, indoors and outdoors With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Fixture thickness (mm) Package contents Item no.
HST-R M8x75/10 8 10 50 376039
HST-R M8x95/30 8 30 50 376041
HST-R M10x90/10 10 10 50 376043
HST-R M10x110/30 10 30 40 295368
HST-R M10x130/50 10 50 25 376045
HST-R M12x115/20 12 20 25 376047
HST-R M12x145/50 12 50 25 376048
HST-R M16x140/25 16 25 12 376051
HST-R M16x165/50 16 50 12 376052
HST-R M16x215/100 16 100 12 376053
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HSA segment anchor, galvanized With ETA approval for use in uncracked concrete
Ordering designation Hole dia. (mm) Fixture thickness (mm) Package contents Item no.
HSA M6x65/10/20 6 20 200 255831
HSA M6x85/30/40 6 40 100 255832
HSA M8x57/-/5 8 5 100 255834
HSA M8x75/10/23 8 23 100 255835
HSA M8x92/27/40 8 40 40 295377
HSA M8x115/50/63 8 63 50 255837
HSA M10x68/-/5 10 5 50 255839
HSA M10x90/20/25 10 25 50 255840
HSA M10x108/37/45 10 45 40 295350
HSA M12x100/5/25 12 25 25 255845
HSA M12x120/25/45 12 45 25 255846
HSA M12x150/55/75 12 75 25 255847HSA M12x180/85/105 12 105 25 255848
HSA M16x120/5/25 16 25 16 255853
HSA M16x140/25/45 16 45 16 255854
HSA M16x190/75/95 16 95 16 255855
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
36/4836
Ordering information for metal fabricators
HSA-R segment anchor, A4 stainless steel For indoor and outdoor use With ETA approval for use in uncracked concrete
Ordering designation Hole dia. (mm) Fixture thickness (mm) Package contents Item no.
HSA-R M6x50/-5 6 5 100 332183
HSA-R M6x65/10/- 6 - 200 332184
HSA-R M6x85/30/- 6 - 100 332185HSA-R M8x75/10/23 8 23 100 332187
HSA-R M8x92/27/40 8 40 40 295370
HSA-R M10x65/-/5 10 5 50 332190
HSA-R M10x90/20/25 10 25 50 332191
HSA-R M10x120/50/57 10 57 40 295378
HSA-R M12x100/5/25 12 25 25 332194
HSA-R M12x120/25/45 12 45 25 332195
HSA-R M16x140/25/45 16 45 16 337117
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
Setting tools for the HST and HSA
Ordering designation Package contents Item no.
HS-SC 150 setting tool 1 337918
M6 M12, fits TE-C (SDS-plus) chucks, 150 mm overall length
HS-SC 300 setting tool 1 337919
M6 M12, fits TE-C (SDS-plus) chucks, 300 mm overall length
HLC sleeve anchor, bolt version For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block
Ordering designation Thread Anchor length (mm) Fixture thickness (mm) Package contents Item no.
HLC 8 x 40/10 M6 40 10 100 385814
HLC 8 x 55/25 M6 55 25 100 385816
HLC 10 x 40/5 M8 40 5 50 385819HLC 10 x 50/15 M8 50 15 50 385820
HLC 10 x 60/25 M8 60 25 50 385822
HLC 10 x 100/65 M8 100 65 50 385824
HLC 12 x 55/15 M10 55 15 50 385825
HLC 12 x 75/35 M10 75 35 50 385827
HLC 12 x 100/60 M10 100 60 25 385829
HLC 16 x 60/10 M12 60 10 25 385830
HLC 16 x 100/50 M12 100 50 10 385831
HLC 16 x 140/90 M12 140 90 10 385832
HLC-H sleeve anchor with hex. head
For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block
Ordering designation Thread Anchor length (mm) Fixture thickness (mm) Package contents Item no.
HLC-H 8 x 40/10 M6 40 10 100 385836
HLC-H 8 x 55/25 M6 55 25 100 385838
HLC-H 8 x 70/40 M6 70 40 100 385840
HLC-H 10 x 40/5 M8 40 5 50 385841
HLC-H 10 x 60/25 M8 60 25 50 385842
HLC-H 10 x 100/65 M8 100 65 50 385847
HLC-H 12 x 55/15 M10 55 15 50 385848
HLC-H 12 x 75/35 M10 75 35 50 385849
HLC-H 12 x 100/60 M10 100 60 25 385852
HLC-H 16 x 60/10 M12 60 10 10 385853
HLC-H 16 x 100/50 M12 100 50 15 385854
HLC-H 16 x 140/90 M12 140 90 10 385855
7/28/2019 Metal Fab Combi
37/4837
Ordering information for metal fabricators
HLC-SK sleeve anchor, with countersunk head For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block
Ordering designation Thread Anchor length (mm) Fixture thickness (mm) Package contents Item no.
HLC-SK 6.5 x 45/20 M5 45 20 100 385856
HLC-SK 6.5 x 65/40 M5 65 40 100 385857
HLC-SK 8 x 60/25 M6 60 25 100 385859
HLC-SK 8 x 75/40 M6 75 40 100 385860
HLC-SK 8 x 90/55 M6 90 55 100 385861
HLC-SK 10 x 45/5 M8 45 5 50 385862
HLC-SK 10 x 85/45 M8 85 45 50 385863
HLC-SK 10 x 105/65 M8 105 65 50 385864
HLC-SK 10 x 130/95 M8 130 95 25 385865
HLC-SK 12 x 80/35 M10 80 35 50 385866
HLC-L sleeve anchor, with oval head For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block
Ordering designation Thread Anchor length (mm) Fixture thickness (mm) Package contents Item no.
HLC-L 10 x 50/15 M8 50 15 50 385867HLC-L 10 x 60/25 M8 60 25 50 385868
HLC-L 10 x 80/45 M8 80 45 50 385869
HLC-L 10 x 100/65 M8 100 65 50 385870
HLC sleeve anchor, in bulk package For permanent or temporary fastenings in concrete, solid brick, sand-lime block, concrete block
Ordering designation Thread Anchor length (mm) Fixture thickness (mm) Package contents Item no.
HLC 8 x 40/10 BUCKET M6 40 10 500 385815
HLC 10 x 50/15 BUCKET M8 50 15 400 385821
HLC 12 x 55/15 BUCKET M10 55 15 250 385826
HLC 12 x 75/35 BUCKET M10 75 35 200 385828
HLC-H 8 x 55/25 BUCKET M6 55 25 500 385839
HLC-H 10 x 60/25 BUCKET M8 60 25 300 385844
HLC-H 10 x 80/45 BUCKET M8 80 45 200 385846
HLC-H 12 x 75/35 BUCKET M10 75 35 150 385851
Mechanical anchors: screw anchor system
HUS-H 6 screw anchor, galvanized With hex. head and integrated washer, for use in concrete and masonry
Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.setting depth (mm)
HUS-H 6x35 6 35 34 - 100 273655
HUS-H 6x45 6 45 34 - 100 273656HUS-H 6x60 6 60 34 - 100 273659
HUS-H 6x80 6 80 34 - 100 273663
HUS-H 6x100 6 100 34 - 100 273666
HUS-H 6x120 6 120 34 - 100 273667
HUS-HR 6 screw anchor, A4 stainless steel With hex. head and integrated washer, for use in concrete and masonry, indoors and outdoors With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.setting depth (mm)
HUS-HR 6x35/5 6 35 - 30 50 290005
HUS-HR 6x45/15 6 45 - 30 50 290011HUS-HR 6x60/5/30 6 60 55 30 50 290014
HUS-HR 6x70/15/40 6 70 55 30 50 290015
7/28/2019 Metal Fab Combi
38/4838
Ordering information for metal fabricators
HUS-H 8 screw anchor, galvanized With hex. head and integrated washer, for use in concrete and masonry With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.setting depth (mm)
HUS-H 8x55/-/5 8 55 - 50 50 368728
HUS-H 8x65/5/15 8 65 - 60 50 368729
HUS-H 8x80/5/20/30 8 80 75 60 50 401438
HUS-H 8x90/15/30/40 8 90 75 60 50 368731
HUS-H 8x110/35/50/60 8 110 75 60 50 368732
HUS-H 8x130/55/70/80 8 130 75 60 50 368733
Anchors in other lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HUS-HR 8 screw anchor, A4 stainless steel With hex. head and integrated washer, for use in concrete and masonry, indoors and outdoors With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.setting depth (mm)
HUS-HR 8x55/5 8 55 - 50 25 290029
HUS-HR 8x65/5/15 8 65 - 60 25 290030
HUS-HR 8x75/15/25 8 75 - 60 25 290031
HUS-HR 8x85/5/25/35 8 85 80 60 25 290032
HUS-HR 8x95/15/35/45 8 95 80 60 20 290033
HUS-HR 8x105/25/45/55 8 105 80 60 20 290034
HUS-H 10 screw anchor, galvanized With hex. head and integrated washer, for use in concrete and masonry With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.setting depth (mm)
HUS-H 10x65/-/5 10 65 - 60 50 368735
HUS-H 10x75/5/15 10 75 - 70 50 368736HUS-H 10x90/5/20/30 10 90 85 70 50 401439
HUS-H 10x100/15/30/40 10 100 85 70 50 368738
HUS-H 10x120/35/50/60 10 120 85 70 50 368739
HUS-H 10x140/55/70/80 10 140 85 70 50 368740
Anchors in other lengths are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HUS-HR 10 screw anchor, A4 stainless steel With hex. head and integrated washer, for use in concrete and masonry, indoors and outdoors With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.setting depth (mm)
HUS-HR 10x65/15 10 65 - 60 25 290062HUS-HR 10x75/5/15 10 75 - 70 25 290063
HUS-HR 10x85/15/25 10 85 - 70 25 290067
HUS-HR 10x95/5/25/35 10 95 90 70 25 290068
HUS-HR 10x105/15/35/45 10 105 90 70 25 290072
HUS-HR 10x115/25/45/55 10 115 90 70 25 290131
HUS-HR 10x130/40/60/70 10 130 90 70 25 290161
HUS-HR 14 screw anchor, A4 stainless steel With hex. head and integrated washer, for use in concrete and masonry, indoors and outdoors With ETA approval for use in cracked and uncracked concrete
Ordering designation Hole dia. (mm) Anchor length (mm) Setting depth (mm) Reduced Package contents Item no.
setting depth (mm)
HUS-HR 14x80/10 14 80 - 70 12 290181
HUS-HR 14x120/10/50 14 120 110 70 12 290182
HUS-HR 14x135/25/65 14 135 110 70 12 290183
7/28/2019 Metal Fab Combi
39/4839
Ordering information for metal fabricators
Cordless impact wrench for driving the HUS-H/-HR screw anchor
Ordering designation Package contents Item no.
SIW 22T-A cordless impact wrench 1 000000
With 1/2" square drive, for driving the HUS-H and HR screw anchor in 8 14 mm sizes
With two B 22 2.6 Li-ion batteries, C 4/36-ACS Li TPS charger, two S-NSD 1/2" 13, two S-NSD 1/2" 15
1/2" S-NSD socket wrench inserts with 1/2" square drive, for driving hex. head screwsOrdering designation Size AF (mm) Package contents Item no.
Set S-NSD medium duty HUS for HUS 8 and HUS 10 screw anchors 13, 15 4 408429
Set S-NSD light duty HUS for HUS 6 and HUS 8 screw anchors 4084303x S-NSD 1/2" 13, bit holder S-BH 28 1/2" 1/4", S-B-TX 30, S-B-TX 40
S-NSD 1/2"-13 S socket wrench insert for HUS 6 and HUS 8 screw anchors 13 1 408402
S-NSD 1/2"-13 L socket wrench insert for HUS 6 and HUS 8 screw anchors 13 1 408416
S-NSD 1/2"-15 S socket wrench insert for HUS 10 screw anchor 15 1 408403
S-NSD 1/2"-15 L socket wrench insert for HUS 10 screw anchor 15 1 408417
S-NSD 1/2"-21 L socket wrench insert for HUS 14 screw anchor 21 1 404422
S-NSD 1/2"-21 S socket wrench insert for HUS 14 screw anchor 21 1 408408
Further socket wrench inserts, adapters and extensions are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
1/2" square drive extension
Ordering designation Package contents Item no.
S-NSD 30 deg universal adapter 1 386059
Mechanical anchors: frame anchors
HRD-UGT 8 frame anchor, galvanized 8 mm frame anchor with countersunk head screw, for use in all base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-UGT 8x100/50 8 60 50 50 202343
HRD-UGT 8x120/70 8 60 70 50 202344
HRD-UGT 8x140/90 8 60 90 50 202345
HRD-UGT 8x60/10 8 60 10 50 202341
HRD-UGT 8x80/30 8 60 30 50 202342
HRD-UGT 10 frame anchor, galvanized 10 mm frame anchor with countersunk head screw, for use in all base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-UGT 10x80/10 10 80 10 50 257272
HRD-UGT 10x100/10 10 80 30 50 257273
HRD-UGT 10x120/50 10 80 50 50 257272
HRD-UGT 10x140/70 10 80 70 50 257275
HRD-UGT 10x160/90 10 80 90 50 257283
HRD-UGT 10x180/110 10 80 110 50 257276
HRD-UGT 10X200/130 10 80 130 50 257284
HRD-URT 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel countersunk head screw, for use in all base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-URT 10x80/10* 10 80 10 50 257289
HRD-URT 10x120/50 10 80 50 50 257290
HRD-UGS 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel hex head screw, for use in all base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-UGS 10x80/10 10 80 10 50 257277
HRD-UGS 10x100/30 10 80 30 50 257278HRD-UGS 10x120/50 10 80 50 50 257279
HRD-UGS 10x140/70 10 80 70 50 257275
HRD-UGS 10x160/90 10 80 90 50 257286
HRD-UGS 10x180/110 10 80 110 50 257281
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
40/48
Hilti HSS
twist drills for
metal fabricators
Top gear throughout.
Hilti. Outperform. Outlast.
Flat out across the finishing line!
Hilti twist drills for metal keep you up
to maximum speed right to the end
of the very last lap. Every ones a
winner in this range of extremely
durable, fast-cutting HSS drill bits
and heat-resistant cobalt bits for the
hardest drilling jobs. Available indi-
vidually in all diameters or in practi-
cal sets for metal fabricators.
Try them now!
www.hilti.com/metal_fabricators
Hilti Corporation I 9494 Schaan I Liechtenstein I P +423-234 2111 I F +423-234 2965 I www.hilti.com
7/28/2019 Metal Fab Combi
41/48
HRD-UGS 10 U frame anchor, galvanized 10 mm frame anchor with collar and hex. screw, for use in all base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-UGS 10x80/10U 10 80 10 25 257282
HRD-UGS 10x100/30U 10 80 30 25 334936
HRD-UGS 10x120/50U 10 80 50 25 388134
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HRD-URS 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel hex. screw, for use in all base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-URS 10x80/10 10 80 10 50 257291
HRD-URS 10x100/30 10 80 30 50 257292
HRD-URS 10x120/50 10 80 50 50 257293
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HRD-UGS 10 U frame anchor, A4 stainless steel 10 mm frame anchor with collar and stainless steel hex. screw, for use in all base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-UGS 10x80/10U 10 80 10 25 337184
HRD-UGS 10x100/30U 10 80 30 25 305180
HRD-SGT 10 frame anchor, galvanized 10 mm frame anchor with countersunk head screw, for use in all solid base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-SGT 10x60/10 10 80 10 50 331500
HRD-SGT 10x80/30 10 80 30 50 331501
HRD-SGT 10x100/50 10 80 50 50 331502
HRD-SGT 10x120/70 10 80 70 50 331503
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HRD-SRT 10 frame anchor, A4 stainless steel 10 mm frame anchor with collar and stainless steel hex. screw, for use in all solid base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-SRT 10X60/10 10 60 10 50 331513
HRD-SRT 10X100/50 10 60 50 50 331514
HRD-SRT 10X140/90 10 60 90 50 331515
HRD-SGS 10 frame anchor, galvanized 10 mm frame anchor with hex. screw, for use in all solid base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-SGS 10x60/10 10 80 10 50 331506
HRD-SGS 10x80/30 10 80 30 50 331507
HRD-SGS 10x100/50 10 80 50 50 331508
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HRD-SGS 10 U frame anchor, galvanized 10 mm frame anchor with collar and hex. screw, for use in all solid base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-SGS 10x60/10U 10 80 10 50 332295
HRD-SGS 10x80/30U 10 80 30 50 334937
41
Ordering information for metal fabricators
7/28/2019 Metal Fab Combi
42/4842
Ordering information for metal fabricators
HRD-SRS 10 frame anchor, A4 stainless steel 10 mm frame anchor with stainless steel hex. screw, for use in all solid base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-SRS 10x60/10 10 80 10 50 331516
HRD-SRS 10x80/30 10 80 30 50 331517
HRD-SRS 10x100/50 10 80 50 50 331518
Anchors in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HRD-SRS 10 U frame anchor, A4 stainless steel 10 mm frame anchor with collar and stainless steel hex. screw, for use in all solid base materials
Ordering designation Hole dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HRD-SRS 10x60/10U 10 80 10 25 305181
HRD-SRS 10x80/30U 10 80 30 25 305182
Chemical anchors
HIT-HY 150-MAX injectable mortar
Ordering designation Contents (ml) Package contents Item no.
Hilti HIT-HY 150 MAX/330/2 330 1 298119
For cracked and uncracked concrete
Hilti HIT-HY 150 MAX/500/2 500 1 298220
For cracked and uncracked concrete
HIT-HY 70 injectable mortar
Ordering designation Contents (ml) Package contents Item no.
Hilti HIT-HY 70/330/2 330 1 383677
For uncracked concrete, hollow or solid brick/block, cellular concrete, natural stone
Hilti HIT-HY 70/500/2 500 1 383681
For uncracked concrete, hollow or solid brick/block, cellular concrete, natural stone
HIT-HY MM PLUS injectable mortar
Ordering designation Contents (ml) Package contents Item no.
Hilti HIT-MM PLUS/330/1 330 1 408952
For light-duty fastenings in masonry and concrete
Hilti HIT-MM PLUS/500/1 500 1 408954
For light-duty fastenings in masonry and concrete
Dispensers
Ordering designation Package contents Item no.
MD 2500 dispenser set 1 369220
With cleaning aids
ED 3500-A CAS cordless dispenser 1 260862With cleaning aids
Other cleaning aids and accessories are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HIT-V anchor rods, galvanized With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete
Ordering designation Drill bit dia. (mm) Min. hole depth (mm) Fixture thickness (mm) Package contents Item no.
HIT-V M8x80 10 60 20 20 387054
HIT-V M8x110 10 80 50 20 387055
HIT-V M10x115 12 60 55 10 387146
HIT-V M10x130 12 90 23 10 387058
HIT-V M12x110 14 70 40 10 387060
HIT-V M12x120 14 70 50 10 387147
HIT-V M12x150 14 110 21 10 387061
HIT-V M16x150 18 80 70 5 387064
HIT-V M16x200 18 125 52 5 387065
HIT-V M16x300 18 80 220 5 387066
Anchor rods in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
7/28/2019 Metal Fab Combi
43/4843
Ordering information for metal fabricators
HIT-V-R anchor rods, A4 stainless steel With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete
Ordering designation Drill bit dia. (mm) Hole depth (mm) Fixture thickness (mm) Package contents Item no.
HIT-V-R M8x80 10 60 20 20 387074
HIT-V-R M8x110 10 60 50 20 387075
HIT-V-R M10x115 12 60 55 10 387148
HIT-V-R M10x130 12 60 23 10 387078HIT-V-R M12x110 14 70 40 10 387080
HIT-V-R M12x120 14 70 50 10 387149
HIT-V-R M12x150 14 110 21 10 387081
HIT-V-R M16x150 18 80 70 5 387084
HIT-V-R M16x200 18 80 52 5 387085
HIT-V-R M16x300 18 80 220 5 387086
Anchor rods in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
AM threaded rods, galvanized
Ordering designation Drill bit dia. (mm) Package contents Item no.
AM6X1000 8.8 8 20 407495AM8X1000 8.8 10 20 407496
AM10X1000 8.8 12 20 407497
AM12X1000 8.8 14 15 407498
AM16X1000 8.8 18 5 407499
Other steel grades and dimensions are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HIS-N internally threaded sleeves, galvanized With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete
Ordering designation Drill bit dia. (mm) Hole depth (mm) Thread size Package contents Item no.
HIS-N M8x90 14 95 M8 10 258015
HIS-N M10x110 18 115 M10 10 258016
HIS-N M12x125 22 130 M12 5 258017
HIS-N M16x170 28 175 M16 5 258018
HIS-N M20x205 32 210 M20 5 258019
Anchor rods in other diameters and for other fixture thicknesses are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
HIS-RN internally threaded sleeves, A4 stainless steel With approval for use with Hilti HIT-HY 150 MAX in uncracked concrete
Ordering designation Drill bit dia. (mm) Hole depth (mm) Thread size Package contents Item no.
HIS-RN M8x90 14 95 M8 10 258024
HIS-RN M10x110 18 115 M10 10 258025
HIS-RN M12x125 22 130 M12 5 258026
HIS-RN M16x170 28 175 M16 5 258027HIS-RN M20x205 32 210 M20 5 258028
HIT-SC mesh sleeves for Hilti HIT-HY 70 and Hilti HIT MM For use in all building materials with cavities
Ordering designation Drill bit dia. (mm) Anchor rod dia. (mm) Sleeve length (mm) Package contents Item no.
HIT-SC 12x50 12 6 50 20 375979
HIT-SC 12x85 12 6 85 20 375980
HIT-SC 16x50 16 8 + 10 50 20 375981
HIT-SC 16x85 16 8 + 10 85 20 375982
HIT-SC 18x50 18 10 + 12 50 20 360485
HIT-SC 18x85 18 10 + 12 85 20 360486
HIT-SC 22x50 22 12 + 16 50 20 273662
HIT-SC 22x85 22 12 + 16 85 10 284511
7/28/2019 Metal Fab Combi
44/4844
Ordering information for metal fabricators
Fastening gratings
Direct fastening
Ordering designation Package contents Item no.
DX 460 GR powder-actuated tool 1 304396
DX 76 PTR powder-actuated tool 1 384004
X-FCM-M grating fastening disc, duplex coated
Ordering designation Shank length (mm) Fixture thickness (mm) Package contents Item no.
X-FCM-M 25/30 23 25 30 100 378683
X-FCM-M 35/40 33 35 40 100 378684
X-FCM-M 45/50 43 45 50 100 378685
X-CR M8 threaded studsfor X-FCM grating discs, A4 stainless steel, thread length 15 mm, shank dia. 4 mm
Ordering designation Fixture thickness (mm) Thread length (mm) Package contents Item no.
X-CR M8-15-12 P8 9 - 13 15 100 372033
X-CR M8-15-12 FP10 9 - 13 15 100 372034
X-GR-RU fastener, duplex coated, A4 stainless steel nail
Ordering designation Grating height (mm) Package contents Item no.
X-GR-RU 25-30 CR20P8 25 30 100 384239
X-GR-RU 35-40 CR20P8 35 - 40 100 384240
X-MGR grating fastener, hot-dip galvanizedFor fastenings gratings by hand using the SF 144-A cordless screwdriver and S-B HEX6 bit
Ordering designation Grating height (mm) Tool size Package contents Item no.
X-MGR M60 grating fastener 25 40 HEX6 20 384233
Accessories
Ordering designation Package contents Item no.
X-76-F-8-GR-PTR fastener guide for fastening gratings using the DX 76 PTR 1 388852
X-460-TGR fastener guide for fastening gratings using the DX 460 GR 1 386124
X-76-P-8-GR-PTR piston for fastening gratings using the DX 76 PTR 1 388853
X-460 PGR piston for fastening gratings using the DX 460 GR 1 305448
Spray SNDX 66 ml 1 308976
Goggles I-VO 805 PSclear
1 285780Other accessories and cleaning sets are available from your local Hilti Center or from the Hilti online catalog at www.hilti.com
Cartridges for powder-actuated tools
Ordering designation Package contents Item no.
Special cartridge 6.8/18 M red for the DX 76 PTR 100
Recommended