View
214
Download
0
Category
Preview:
Citation preview
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 1 页 共 25 页
Name: Yangzhong Inspection and Testing Center
Address: No.168, Zhongdian Road, Yangzhong, Jiangsu, China
Registration No. CNAS L6001
Accreditation Criteria: ISO/IEC 17025 and relevant requirements of CNAS
Effective Date: 2018-12-05 Expiry Date:2025-01-04
SCHEDULE 3 ACCREDITED TESTING SCOPE
Item/Parameter№ Test Object
№ Item/ ParameterStandard or Method Note
1 Appearance and dimensions inspection Cable support system for electric control distribution JB/T10216-2013 5.1
2 Mechanical load test Cable support system for electric control distribution JB/T10216-2013 5.2
3 Test for impact resistance Cable support system for electric control distribution JB/T10216-2013 5.3
4 Test Db:Damp heat Cable support system for electric control distribution JB/T10216-2013 5.4
5 Test Ka:Salt mist Cable support system for electric control distribution JB/T10216-2013 5.4
6 Measurement of coating thickness Cable support system for electric control distribution JB/T10216-2013 5.5
7 Test for coating adhesion Cable support system for electric control distribution JB/T10216-2013 5.5
8 Test for coating uniformity Cable support system for electric control distribution JB/T10216-2013 5.5
1
Cable support system for electric control distribution
9 Electrical continuity test Cable support system for electric control distribution JB/T10216-2013 5.6
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 2 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
10 Degrees of protection (IP code) Cable support system for electric control distribution JB/T10216-2013 5.7
11 Spread of fire Cable support system for electric control distribution JB/T10216-2013 5.9
12 Resistance against water Cable support system for electric control distribution JB/T10216-2013 5.9
13 Test for resistance against corrosion Cable support system for electric control distribution JB/T10216-2013 5.9
14Test for electrical strength at power frequencies
Cable support system for electric control distribution JB/T10216-2013 5.9
15 Test for surface resistivity Cable support system for electric control distribution JB/T10216-2013 5.9
16 Test for volume resistivity Cable support system for electric control distribution JB/T10216-2013 5.9
17 Nameplate Cable support system for electric control distribution JB/T10216-2013 7.1.1
18 Marking Cable support system for electric control distribution JB/T10216-2013 7.1.2
1 Marking Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 7.1
2 Dimensions Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 8
3 System component Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 10.1,10.2,10.3,10.4,10.5.10.6,10.7,10.8
4 Safe working load Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 10.9
5 Test for impact resistance
Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 11.1
2Cable management systems
6 Verification of electrical continuity
Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 14.2
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 3 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
7Anti-corrosion(Measurement of coating thickness
Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 14.2.3
8Anti-corrosion(Neutral salt spray test(NSS))
Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 9.3
9 Appearance inspection
Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 9.2,9.4,9.5,9.6
10 Electrical nonconductivity
Cable management -- Cable tray systems and cable ladder systems GB/T21762-2008 11.2
1 Appearance inspection
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.1.5
2 Neutral salt spray test (NSS)
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.2.1
3 Alkali resistance immersion
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.2.2
4 Acid resistance immersion test
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.2.2
5 Measurement of coating thickness
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.2.1;5.2.2
6 Test for coating adhesion
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.2.1;5.2.2
7 Coating conductivity Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.2.1
8 Coating insulation Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.2.2
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.3
3
Energy conservation and corrosion-resistant steel-made cable support system
9
Energy conservation (Material saving rate、Energy conservation rate)
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.3
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 4 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
10 Mechanical property test
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.4
11 Distributed load classification test
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.5
12 Test for impact resistance
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.6
13 Electrical continuity test
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.7
14 Dimensions Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.9
15 Marking Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 8.1
16 Degrees of protection(IP code)
Energy conservation and corrosion-resistant steel-madecable support system GB/T23639-2017 5.8
1 Mimimum thickness of plate and sheet Code for design of steel cable tray engineering T/CECS31:2017 3.5.5
2 Measurement of coating thickness Code for design of steel cable tray engineering T/CECS31:2017 3.6
3 Test for coating adhesion Code for design of steel cable tray engineering T/CECS31:2017 3.6
4 Appearance of coating Code for design of steel cable tray engineering T/CECS31:2017 3.6
5Determination of impact resistance of coating
Code for design of steel cable tray engineering T/CECS31:2017 3.6.5
6 Welding surface quality
Code for design of steel cable tray engineering T/CECS31:2017 3.7.1;3.7.3
4 Steel cable tray engineering
7 Dimensions Code for design of steel cable tray engineering T/CECS31:2017 3.4.2~3.4.9
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 5 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
8 Mechanical load test Code for design of steel cable tray engineering T/CECS31:2017 3.5.6~3.5.12
9 Electrical continuity test Code for design of steel cable tray engineering T/CECS31:2017 3.7.4
10 Test Db:Damp heat, cyclic(12h+12h cycle) Code for design of steel cable tray engineering T/CECS31:2017 3.8.2
11 Neutral salt spray test (NSS) Code for design of steel cable tray engineering T/CECS31:2017 3.8.2
12 Chemical test Code for design of steel cable tray engineering T/CECS31-2017 3.8.2
13 Test of UV-condensation Code for design of steel cable tray engineering T/CECS31:2017 3.8.2
1 Measurement of coating thickness Technical specification for aluminum-alloy cable tray CECS106:2000 3.2.3
2 Test for coating adhesion Technical specification for aluminum-alloy cable tray CECS106:2000 3.2.3
3 Appearance of coating Technical specification for aluminum-alloy cable tray CECS106:2000 3.2.3
4Determination of impact resistance of coating
Technical specification for aluminum-alloy cable tray CECS106:2000 3.2.3
5 Welding or riveting surface quality Technical specification for aluminum-alloy cable tray CECS106:2000 6.2.6
6 Dimensions Technical specification for aluminum-alloy cable tray CECS106:2000 3.2.8
7 Mechanical load test Technical specification for aluminum-alloy cable tray CECS106:2000 3.2.2
8 Electrical continuity test Technical specification for aluminum-alloy cable tray CECS106:2000 3.2.10
5 Aluminum-alloy cable tray
9 Neutral salt spray test Technical specification for aluminum-alloy cable tray CECS106:2000 3.3.6
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 6 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
(NSS)
10 Test for UV-condensation Technical specification for aluminum-alloy cable tray CECS106:2000 3.3.6
1 Appearance inspection Cable supports system QB/T1453-2003 4.6
2 Mechanical load test Cable supports system QB/T1453-2003 4.2
3 Measurement of coating thickness Cable supports system QB/T1453-2003 4.3
4 Test for coating adhesion Cable supports system QB/T1453-2003 4.3
5 Appearance of coating Cable supports system QB/T1453-2003 4.3
6Determination of impact resistance of coating
Cable supports system QB/T1453-2003 4.3
7 Test for coating uniformity Cable supports system QB/T1453-2003 4.3
8 Tolerances on forms and dimensions Cable supports system QB/T1453-2003 4.5
9 Electrical continuity test Cable supports system QB/T1453-2003 4.7
10 Neutral salt spray test (NSS) Cable supports system QB/T1453-2003 5.2
11 Test Db:Damp heat, cyclic(12h+12h cycle) Cable supports system QB/T1453-2003 5.2
12 Test of UV-condensation Cable supports system QB/T1453-2003 5.2
6 Cable supports system
13 Marking Cable supports system QB/T1453-2003 7.1
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 7 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
7
Energy conservation cable support system
1 Energy saving rate Energy conservation certification cable support system CQC3115-2009 5
1 Mechanical load test Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.1
2Verification of temperature-rise limits
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.2
Accredited only for:temperature-rise test following 6300A
3Verification of the effectiveness of protective circuit
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.3
4Verification of resistance,reactance and impedance values
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.6
5 Verification of insulation resistance
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.7
6 Dielectric test Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.7
7Verification of creepage distances and clearance
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.8
8 Verification of mechanical operation
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.9
8 Air insulted busway
9 Verification of degree of protection (IP
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.10
Accredited only for:
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 8 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
code) following IP68
10 Verification of resistance to crushing
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.11
11
Verification of the resistance of insulating materials to abnomal heat and fire
Air insulated busbar trunking sustems (Air insulted busway) JB/T8511-2011 5.1.2.12
1 Mechanical load test Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.1
2Verification of temperature-rise limits
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.2
Accredited only for:temperature-rise test following 6300A
3Verification of the effectiveness of protective circuit
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.3
4Verification of resistance,reactance and impedance values
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.5
5 Verification of insulation resistance
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.6
6 Dielectric test Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.7
9 Closed insulated busway
7Verification of creepage distances and clearance
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.8
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 9 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
8 Verification of mechanical operation
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.9
9Verification of degree of protection (IP code)
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.10
Accredited only for: following IP68
10 Verification of resistance to crushing
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.1.2.11
11
Verification of the resistance of insulating materials to abnomal heat and fire
Closed insulaed busbar trunking systems (Closed insulated busway) JB/T9662-2011 5.2.12
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 11.10
1Wiring, operational performance and function Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking
systems(busways) GB/T7251.6-2015 11.10
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.2.2
2Verification of resistance against corrosion Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking
systems(busways) GB/T7251.6-2015 10.2.2
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.2.3.2
3
Verification of the resistance of insulating materials to abnomal heat and fire due to internal electric effects
Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking systems(busways) GB/T7251.6-2015 10.2.3.2
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.2.5
10 Busways
4 Lifting Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking systems(busways) GB/T7251.6-2015 10.2.5
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 10 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.2.7
5 Marking Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking systems(busways) GB/T7251.6-2015 10.2.7
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.2.1
6Resistant to mechanical load capacity Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking
systems(busways) GB/T7251.6-2015 10.2.101
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.2.1
7 Verification of heat cycle Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking
systems(busways) GB/T7251.6-2015 10.2.102
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.3
Accredited only for: following IP688 Verification of
structural strengthLow-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking systems(busways) GB/T7251.6-2015 10.3
Accredited only for: following IP68
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.4
9Verification of creepage distances and clearance Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking
systems(busways) GB/T7251.6-2015 10.4
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.5
10
Protetiong against electric shock and integrity of protective circuits
Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking systems(busways) GB/T7251.6-2015 10.5
11 Verification of dielectric properties
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.9
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 11 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking systems(busways) GB/T7251.6-2015 10,9
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.10
12 Verification of temperature rise Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking
systems(busways) GB/T7251.6-2015 10.10
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.13
13 Verification of mechanical operation Low-voltage switchgear and controlgear assemblies- Part 6:Busbar trunking
systems(busways) GB/T7251.6-2015 10.13
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T 7251.1-2013 10.2
1Verification of strength of materials and part Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.2
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.3
Accredited only for: following IP682
Verification of degree of protection (IP code) Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.3
Accredited only for: following IP68
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.4
3Verification of creepage distances and clearance Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.4
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.5
11Low-voltage switchgear assemblies
4
Protetiong against electric shock and integrity of protective circuits
Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear and controlgear assemblies GB/T 7251.12-2013 10.5
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 12 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.7
5Internal electrical circuits and connections Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.7
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.8
6 Terminnals for external conductors Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.8
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.9
7 Verification of dielectric properties Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.9
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.10
8 Verification of temperature rise Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.10
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T7251.1-2013 10.13
9 Verification of mechanical operation Low-voltage switchgear and controlgear assemblies-Part 2:Power switchgear
and controlgear assemblies GB/T 7251.12-2013 10.13
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB/T 7251.1-2013 10.2
1Verification of strength of materials and part Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.2
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.3
Accredited only for: following IP68
12 Distribution board
2Verification of degree of protection (IP code) Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.3
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 13 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.4
3Verification of creepage distances and clearance Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.4
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.5
4
Protetiong against electric shock and integrity of protective circuits
Low-voltage switchgear and controlgear assemblies-Part 3: intended to be operated by ordinary persons (BOD) GB/T7251.3-2017 10.5
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.7
5Internal electrical circuits and connections Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.7
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.8
6 Terminnals for external conductors Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.8
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.9
7 Verification of dielectric properties Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.9
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.10
8 Verification of temperature rise Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.10
Low-voltage switchgear and controlgear assemblies- Part 1:General rules GB /T7251.1-2013 10.13
9 Verification of mechanical operation Low-voltage switchgear and controlgear assemblies-Part 3: intended to be
operated by ordinary persons (BOD) GB/T7251.3-2017 10.13
13 Metal-enclosed bus 1 Verification of
insulation resistance Metal-enclosed bus GB/T8349-2000 8.2.3
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 14 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2Verification of power-frequency withstand voltage
Metal-enclosed bus GB/T8349-2000 5.4
3Verification of temperature-rise limits
Metal-enclosed bus GB/T8349-2000 5.6
Accredited only for:temperature-rise test following 6300A
4Verification of degree of protection (IP code)
Metal-enclosed bus GB/T8349-2000 6.8
Accredited only for: following IP68
1 Tolerances on forms and dimensions
Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.4
2 Fillet Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.4.5
3 Flatness Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.6
4 Tensile stress Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.7.1
Accredited only for:following 600kN
5 Percentage elongation after fracture
Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.7.1
6 Bend test-single bend test
Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.7.2
14Aluminium bus bars for elecrical purposes
7 Electrical resistivity Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.11
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 15 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
8 Surface quality Copper or aluminium and its alloy bus bars for elecrical purposes Part 2:Aluminium and aluminium alloy bus bars GB/T5585.2-2005 4.1
1Appearance 、 dimensions and marking
Insulation supporting devices and materials for low-voltage switchgear and controlgear assemblies JB/T10316-2013 4.1,6.1
2 Fire hazard test Insulation supporting devices and materials for low-voltage switchgear and controlgear assemblies JB/T10316-2013 4.2
3 Verification of resistance to heat
Insulation supporting devices and materials for low-voltage switchgear and controlgear assemblies JB/T10316-2013 4.3
4Verification of creepage distances and clearance
Insulation supporting devices and materials for low-voltage switchgear and controlgear assemblies JB/T10316-2013 4.5
5 Verification of dielectric properties
Insulation supporting devices and materials for low-voltage switchgear and controlgear assemblies JB/T10316-2013 4.6
6Verification of resistance to damp heat
Insulation supporting devices and materials for low-voltage switchgear and controlgear assemblies JB/T10316-2013 4.7
15
Insulation supporting devices and materials
7 Comparative tracking index
Insulation supporting devices and materials for low-voltage switchgear and controlgear assemblies JB/T10316-2013 4.4
1Verification of the degree of protection ( Ik code)
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.7
2Verification of degree of protection (IP code)
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.8
Accredited only for: following IP68
3 Verification of thermostability
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.9.1
16
Empty enclosures for low-voltage switchgear and controlgear assemblies
4 Verification of resistance to normal
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.9.2
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 16 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
heat
5Verification of resistance to abnormal heat and to fire
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.9.3
6 Verification of dielectric properties
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.10
7Verification of the effectiveness of protective circuit
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.11
8Verification of resistance against corrosion
Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 9.13
9 Marking Empty enclosures for low-voltage switchgear and controlgear assemblies--General requirements GB/T20641-2014 6.1
1 The resistivity of busbar
Energy conservation certification criteria for Colsed insulted busways CQC3131-2015 4.2
2 The section perimeter of buabar
Energy conservation certification criteria for Colsed insulted busways CQC3131-2015 4.3
3 The cross-sectional area of buabar
Energy conservation certification criteria for Colsed insulted busways CQC3131-2015 4.4
17Energy conservation busway
4 Evaluating value of energy conservation
Energy conservation certification criteria for Colsed insulted busways CQC3131-2015 4.5
1 C, Si, Mn, P, S, Al, Cr, Ni, Cu, Ti, V, Mo
Method for photoelectric emission spectroscopic analysis of carbon steel, medium and low alloy steel GB/T 4336-2016
2 C, Si, Mn, P, S, Cr, Ni, Cu, Ti
Stainless steel - Determination of multi-element contents - Spark discharge atomic emission spectrometric method (Routine method) GB/T 11170-2008 18 Metallic
materials
3 Si, Fe, Cu, Mg, Mn, Zn, Ti, Cr, Ni
Optical emission spectrometric analysis method of aluminum and aluminum alloys GB/T 7999-2015
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 17 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
4 Pb, Fe, Sn, Ni, Zn, P, S, Mn, Si, Cr
Methods for analysis of copper and copper alloys - The atomIc emission spectrometry YS/T 482-2005
5 Tensile test Metallic materials - Tensile testing Part 1: Method of test at room temperature GB /T 228.1-2010
Accredited only for Rel、Rm & A wih Method B and Fm≤600kN
6 Bend test Metallic materials - Bend test GB/T 232-2010
Accredited only for V type modules bending
Metallic materials - Brinell hardness test - Part 1: Test method GB/T 231.1-2009
Accredited only for HBW10/10007 Brinell hardness
Test methods for bare wires - Part 8: Hardness test - Brinell hardness test GB/T 4909.8-2009
Accredited only for HBW10/1000
8 Rockwell hardness Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) GB/T 230.1-2009
Accredited only for B & C scales
9 Vickers hardness Metallic materials - Vickers hardness test - Part 1: Test method GB/T 4340.1-2009
Accredited only for HV1
10 Impact test Metallic materials - Charpy pendulum impact test method GB/T 229-2007 Accreduted ony for
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 18 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
KV2 & KU2 at room temperature
11 Electrical resistivity Test methods for electrical properties of electric cables and wires - Part 2: Test of electrical resistivity of metallic materials GB/T 3048.2-2007
Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products GB/T 1839-2008
Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution GB/T 4955-2005
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method GB/T 4956-2003
Non-conductive coatings on non-magnetic basis metals - Measurement of coating thickness - Eddy current method GB/T 4957-2003
Metallic coatings - Electroplatde caatings of tin - Specification and test methods GB/T 12599-2002
1 Thickness
Paints and varnishes - Determination of film thickness GB/T 13452.2-2008
Accredited only for magnetic method
2 Appearance and thickness
Metallic coatings - Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods GB/T 13912-2002
Except for microscopic method
Determination of film adhesion GB/T 1720-1979
19 Surface coating
3 Adhesion Metallic coatings on metallic substrates - Electrodeposited and chemically depositde coatings - Review of methods available for testing adhesion GB/T 5270-2005 2.8
Accredited only for linear cut and cross cut
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 19 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
methods
4 Salt spray test Corrosion tests in artificial atmospheres - Salt spray tests GB/T 10125-2012Accredited only for NSS test
1 Chemical composition Quality carbon structural steels GB/T 699-2015 6.1
Accredited only for spectrometric analysis
2 Tensile Quality carbon structural steels GB/T 699-2015 6.4
3 Surface quality Quality carbon structural steels GB/T 699-2015 6.9
Accredited only for eye examination
20 Quality carbon structural steels
4 Dimension and partern Quality carbon structural steels GB/T 699-2015 5
Accredited only for : measured ≤300mm
1 Chemical composition High strength low alloy structural steels GB/T 1591-2008 6.1
Accredited only for spectrometric analysis
2 Tensile test High strength low alloy structural steels GB/T 1591-2008 6.4
3 Surface quality High strength low alloy structural steels GB/T 1591-2008 6.5
21Higt strength low alloy structural steels
4 Dimension and partern High strength low alloy structural steels GB/T 1591-2008 5
Accredited only for : measured
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 20 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
≤300mm
1 Chemical composition Hot-rolled H and cut T section steel GB/T 11263-2017 6.2.2
Accredited only for spectrometric analysis
2 Tensile Hot-rolled H and cut T section steel GB/T 11263-2017 6.3
3 Surface quality Hot-rolled H and cut T section steel GB/T 11263-2017 6.4 22
Hot-rolled H and cut T section steel
4 Size Hot-rolled H and cut T section steel GB/T 11263-2017 5.2
Accredited only for : measured ≤300mm
1 Chemical composition Hot rolled section steel GB/T 706-2016 5.1
Accredited only for spectrometric analysis
2 Tensile test Hot rolled section steel GB/T 706-2016 Table 5(2)
3 Surface quality Hot rolled section steel GB/T 706-2016 5.4 23 Hot rolled
section steel
4 Size Hot rolled section steel GB/T 706-2016 4.2
Accredited only for : measured ≤300mm
24 Hot-rolled sheets and strips 1 Chemical composition Hot-rolled quality carbon structural steel plates sheets and strips GB/T 711-
2017 5.1.1
Accredited only for spectrometric analysis
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 21 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
2 Tensile test Hot-rolled quality carbon structural steel plates sheets and strips GB/T 711-2017 5.4
3 Size Hot-rolled quality carbon structural steel plates sheets and strips GB/T 711-2017 4
Accredited only for : measured ≤300mm
4 Surface Hot-rolled quality carbon structural steel plates sheets and strips GB/T 711-2017 5.10
1 Chemical composition Hot rolled stainless steel plate,sheet and strip GB/T 4237-2015 6.2.2
Accredited only for spectrometric analysis
2 Tensile test Hot rolled stainless steel plate,sheet and strip GB/T 4237-2015 6.4
3 Size Hot rolled stainless steel plate,sheet and strip GB/T 4237-2015 5
Accredited only for : measured ≤300mm
25
Hot rolled stainless steel plate, sheet and strip
4 Surface Hot rolled stainless steel plate,sheet and strip GB/T 4237-2015 6.7.2
1 Chemical composition Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 6.1.2
Accredited only for spectrometric analysis
2 Tensile test Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 6.4 26
Cold rolled stainless steel plate, sheet and strip
3 Size Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 7.3
Accredited only for : measured ≤300mm
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 22 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
4 Surface quality Cold rolled stainless steel plate, sheet and strip GB/T 3280-2015 6.6.2
1 Chemical composition Stainless steel bars GB/T 1220-2007 7.1
Accredited only for spectrometric analysis
2 Tensile Stainless steel bars GB/T 1220-2007 7.4
3 Dimension Stainless steel bars GB/T 1220-2007 5
Accredited only for : measured ≤300mm
27 Stainless steel bars
4 Surface Stainless steel bars GB/T 1220-2007 7.9
1 Tolerances on forms and dimensions
Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.4
2 Fillet,round dege Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.5
3 Flatness Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.7
4 Tensile stress Copper or aluminium and its alloy bus bars for electrical purposes - Part 1:Copper and copper alloy bus bars GB/T 5585.1-2005 4.8.1
5 Percentage elongation Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.8.1
6 Hardness Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.8.1
7 Bend test-single bend test
Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.8.2
28Copper bus bars for electrical purposes
8 Electrical resistivity Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.11
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 23 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
9 Surface quality Copper or aluminium and its alloy bus bars for electrical purposes - Part 1: Copper and copper alloy bus bars GB/T 5585.1-2005 4.11
1 Damp heat,steady state
Environmental testing for electric and electronic products--part 2:Testing method--Test Cab:Damp heat,steady state GB/T2423.3-2016
2 Damp heat,cyclic Environmental testing for electric and electronic products--Part 2:Testing method--test Db:Damp heat,cyclic(12h+12h cycle) GB/T2423.4-2008
3 Dry heat test Environmental testing for electric and electronic products--Part 2:Test methods--Tests B:Dry heat GB/T2423.2-2008
Accredited only for:measured at room temperature to 200℃
4 Cold test Environmental testing for electric and electronic products--Part 2:Test methods--Tests A: Cold GB/T2423.1-2008
Accredited only for:measured at room temperature to - 50℃
5 Test Ka:Salt mist Environmental testing for electric and electronic products--Part 2:Test methods--Test Ka: Salt mist GB/T2423.17-2008
6 Hammer tests Environmental testing for electric and electronic products--Part 2:Test methods--Test Eh:Hammer tests GB/T2423.55-2006
Accredited only for: the pendulum impact test
Plastics―Methods of exposure to laboratory light sources―Part 3: Fluorescent UV lamps GB/T16422.3-2014
29 Environmental test
7 Test for UV-condensation Artificial weathering test method for plastics,coating and rubber materials
used for machinery industrial products--Fluorescent UV lamps GB/T14522-2008
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 24 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Paints and varnishes--Exposure of coatings to artificial weathering--Exposure to fluorescent UV lamps and water GB/T23987-2009
8 Test N: Change of temperature
Environmental testing - Part 2: Tests methods - Test N: Change of temperature GB/T2423.22-2012
9Test Kb: Salt mist, cyclicGB/T2423.18-2012
Environmental testing - Part 2: Test methods - Test Kb: Salt mist, cyclic (sodium chloride solution) GB/T 2423.18-2012
Plastics--Determination of burning behaviour by oxygen index--Part 1:Guidance GB/T 2406.1-2008
Plastics--Determination of burning behaviour by oxygen index--Part 2:Ambient-temperature test GB/T 2406.2-2009 1 Oxygen index
Test method for flammability characteristics of fiber reinforced plastics--Oxygen index method GB/T 8924-2005
30 Plastics
2 Horizontal and vertical test
Plastics--Determination of burning characteristics--Horizontal and vertical test GB/T2408-2008
1 Electrical strength Electrical strength of insulating materials--Test methods--Part 1:Tests at power frequencies GB/T1408.1-2016
2 Volume resistivity and surface resistivity
Methods of test for volume resistivity and surface resistivity of solid insulating materials GB/T 1410-2006
3 Ball pressure test Fire hazard testing for electric and electronic products--Part 21:Abnormal heat--Ball pressure test GB/T5169.21-2017 31 Insulating
materials
4The proof and the comparative tracking indices
Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB/T 4207-2012
Fire hazard testing for electric and electronic products--Part 10:Glow/hot-wire based test methods--Glow-wire apparatus and common test procedure GB/T 5169.10-2017
32 Glow-wire test 1 Glow-wire test Fire hazard testing for electric and electronic products--Part 12:Glowing/hot-wire based test methods--Glow-wire flammability index(GWFI)test method for materials GB/T 5169.12-2013
ISO/IEC 17025 认可证书
No. CNAS L6001
The scope of the accreditation in Chinese remains the definitive version.
第 25 页 共 25 页
№ Test ObjectItem/Parameter
Standard or Method Note№ Item/ Parameter
Fire hazard testing for electric and electronic products--Part 13:Glowing/hot-wire based test methods--Glow-wire ignition temperature (GWIT) test method for materials GB/T 5169.13-2013
33Protection provided by enclosure
1Verification of degrees of protection (IP code)
Degrees of protection provided by enclosure(IP code) GB/T4208-2017
Accredited only for: following IP 68
1 Volume resistivity Film for elecrical insulation--Part 4: Polythylene terephthalate film used for electrical insulation GB/T13542.4-2009 6.1
2 Surface resistivity Film for elecrical insulation--Part 4: Polythylene terephthalate film used for electrical insulation GB/T13542.4-2009 6.1
3 Tensile test Film for elecrical insulation--Part 4: Polythylene terephthalate film used for electrical insulation GB/T13542.4-2009 6.2
34
Polythylene terephthalate film used for electrical insulation
4 Electrical strength Film for elecrical insulation--Part 4: Polythylene terephthalate film used for electrical insulation GB/T13542.4-2009 6.2
Recommended