View
4
Download
0
Category
Preview:
Citation preview
81
Quick•Point®
Grid Platespage 90
Quick•Point®
Rectangular Platespage 92
Quick•Point®
Adapterpage 102
Quick•Point®
Round Platespage 94
Quick•Point®
Twin-Basespage 100
Quick•Point®
Sub-Basespage 104
Quick•Point®
Support Platespage 106
Quick•Point®
Clamping Studspage 108
Quick•Point®
Accessoriespage 113
Quick•Point®
Automationpage 110
Quick•Point®
Tri-Top Tombstonepage 114
Quick•Point®
Quick-Lockpage 109
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
82
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
the flexible 0-point clamping system with modular building components – compatible with almost all machine tools.
QuiCk•point®: hit the Bull'S eYe!
pitch Measurement: Actual dimensions of thezero-point system
Clamping Stud size:Diameter of theclamping stud
Vise Size:width of the vise base
Quick-lock:adaptability withQuick-Lock accessory
automationsfähig:Automationsschnittstel-le vorhanden
Table specific mounting bores and alignment keys possible
round plate
83
Made in GerManY
the flexible 0-point clamping system with modular building components – compatible with almost all machine tools.
QuiCk•point®: hit the Bull'S eYe!
Grid plate automation Base tower
rectangular plate3-Face tombstone
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
84
Quick•Point® zero-point clamping system – Easy, precise and high holding power.
Rigid, compact base plate made of case-hardened quality steel
Mounting of plate on machine tool tablevia clamps
Only 27 mm high, the lowest Zero-point clamping pallet in the market
High repeatability< 0.005 mm
4x M5 thread for 90 degree indexing postion for batch production
Robust mechanical clamping with oneactuation screw. (Max. torque 30 Nm)
Covers formounting bores
Height 27± 0.01 mm
Quick-Lock– the new fast locking system (optional accessory). See page 109
85
Makro•Grip® 5-Axis ViseItem # 47205
Quick•Point®
Quick•Point® zero-point clamping system – Easy, precise and high holding power.
Quick•Point® offers ideal setting for Makro•Grip® vices.
Quick•Point® – not only highly precise, but also providing high mechanical load capacity. Example: Weight of work piece 175 kg, height 525 mm. 4 clamping studs are directly screwed in the work piece.
Easy adaptation of clamping different vices, fixtures or work pieces by separate available clamping studs.
Featuresand
BenefitsExtremely flexible mounting for different machine tablesModular system for different clamping needsHighly precise repeatability Extraordinary longevity with simple and robust mechanismOnly 27mm high, the lowest zero-point plate on the marketClamping force of 6000kg
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
87
Quick•Point® applications
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
88
3
21
Mounting and alignmentvariations for Quick•Point®
zero-point systemMounting: via custom mounting bore drawingAlignment: with keys and t-fittings
Round plates are best attached to the machine table with custom mounting bores and t-fittings. Ideally the concentric alignment is done via one t-fitting, which has on one side the measurement (12H7) of the center bore of the Quick•Point® plate and on the other side the measurement of the round machine table. It is enough to use an additional key on the underside of the Quick•Point® plate for the axial align-ment. As an alternative to the t-fitting 2 keys can be used in each recess if the layout of the machine table allows it.
Mounting: via clampsAlignment: with keys
Some of the rectangular Quick•Point® plate sizes also has a version with clam-ping edges in addition to mounting bores. This clamping edge can be used to attach the plate with clamps to the machine table. The plate will be aligned via the keyways.
Mounting: via standard boresAlignment: with keys
The standard Quick•Point® plates with the existing mounting bores are attached with nuts in the t-slots of the machine table. The plate will be aligned via keys. The bot-tom of the plate has 20H7 keyways.
89
4
5
6
Quick•Point®Quick•Point®
Mounting: via custom mounting bore drawing
Alignment: with keys
Each of the Quick•Point® plates is also available withoutmounting bores or clamping edges. This allows the modification of the plates to accomodate custom bores specific to the t-slot pattern of the machine table. In addition custom keyways can be machined into the underside of the plate (if necessary with threads for fixed attachment).These modifications can be done by LANG for an additional charge or by the customers themselves (plates are case hardened to 57HRc with a depth of 0.7mm)
Mounting: via custom mounting bore drawing
Alignment: with Quick•Point® Gauges
The standard Quick•Point® plates with the existing mount-ing bores are attached with nuts in the t-slots of the machine table. The alignment is done with a highly precise Quick•Point® Gauge. A probe can measure along thecoordinateground sides of the Gauge and the plate can be aligned accordingly
Mounting: via custom mounting bore drawing
Alignment: with Quick•Point® Gauges
The alignment can be done via the Quick•Point® Gauge after the round plates are attached to the machine table with the custom bores. The probe measures along the coordinate-ground sides of the Gauge to determine the axial aligment. The concentric alignment will be achieved with the inside diameter of the Gauge.
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
90
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77Ø 16 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
Quick•Point® grid plate 192 x 192 x 27 mm, for 96 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® grid plate 192 x 192 x 27 mm,for 96 mm stud distance, without mounting bores
7,2 45710
Set mounting bores depending on customer's request – 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® grid plate 104 x 104 x 27 mm, for 52 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® grid plate 104 x 104 x 27 mm,for 52 mm stud distance, without mounting bores
2,0 45600
Set mounting bores depending on customer's request – 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® grid pallets
Quick•Point® grid pallets
91
Ausrichten von QuickPoint-Rasterplatten mittels Ausrichtlehre
Aufsetzen der mittleren 4 Platten mit den erforderlichen Befestigungsschrauben. In 2 Bohrungen werden zunächst Paßstifte eingesetzt, die die Ausrichtung in der Nut des Maschinentisches übernehmen.
Zusätzlich wird über alle 4 Quick Point Platten übergreifend die Ausrichtlehre eingesetzt.
Sind die erreichbaren Befestigungsschrauben angezogen werden, die Paßstifte gezogen und durch Befestigungsschrauben ersetzt.
Nun werden die äußeren Quick Point Platten mittels der Ausrichtlehre sinngleich ausgerichtet und befestigt.
Ausrichten von QuickPoint-Rasterplatten mittels Ausrichtlehre
Aufsetzen der mittleren 4 Platten mit den erforderlichen Befestigungsschrauben. In 2 Bohrungen werden zunächst Paßstifte eingesetzt, die die Ausrichtung in der Nut des Maschinentisches übernehmen.
Zusätzlich wird über alle 4 Quick Point Platten übergreifend die Ausrichtlehre eingesetzt.
Sind die erreichbaren Befestigungsschrauben angezogen werden, die Paßstifte gezogen und durch Befestigungsschrauben ersetzt.
Nun werden die äußeren Quick Point Platten mittels der Ausrichtlehre sinngleich ausgerichtet und befestigt.
Ausrichten von QuickPoint-Rasterplatten mittels Ausrichtlehre
Aufsetzen der mittleren 4 Platten mit den erforderlichen Befestigungsschrauben. In 2 Bohrungen werden zunächst Paßstifte eingesetzt, die die Ausrichtung in der Nut des Maschinentisches übernehmen.
Zusätzlich wird über alle 4 Quick Point Platten übergreifend die Ausrichtlehre eingesetzt.
Sind die erreichbaren Befestigungsschrauben angezogen werden, die Paßstifte gezogen und durch Befestigungsschrauben ersetzt.
Nun werden die äußeren Quick Point Platten mittels der Ausrichtlehre sinngleich ausgerichtet und befestigt.
Ausrichten von QuickPoint-Rasterplatten mittels Ausrichtlehre
Aufsetzen der mittleren 4 Platten mit den erforderlichen Befestigungsschrauben. In 2 Bohrungen werden zunächst Paßstifte eingesetzt, die die Ausrichtung in der Nut des Maschinentisches übernehmen.
Zusätzlich wird über alle 4 Quick Point Platten übergreifend die Ausrichtlehre eingesetzt.
Sind die erreichbaren Befestigungsschrauben angezogen werden, die Paßstifte gezogen und durch Befestigungsschrauben ersetzt.
Nun werden die äußeren Quick Point Platten mittels der Ausrichtlehre sinngleich ausgerichtet und befestigt.
Ausrichten von QuickPoint-Rasterplatten mittels Ausrichtlehre
Aufsetzen der mittleren 4 Platten mit den erforderlichen Befestigungsschrauben. In 2 Bohrungen werden zunächst Paßstifte eingesetzt, die die Ausrichtung in der Nut des Maschinentisches übernehmen.
Zusätzlich wird über alle 4 Quick Point Platten übergreifend die Ausrichtlehre eingesetzt.
Sind die erreichbaren Befestigungsschrauben angezogen werden, die Paßstifte gezogen und durch Befestigungsschrauben ersetzt.
Nun werden die äußeren Quick Point Platten mittels der Ausrichtlehre sinngleich ausgerichtet und befestigt.
Quick•Point® allignment gauge
For simple assembly of Quick•Point® grid pallets we recommend to apply the alignment gauge.Precise aligning and dimensional accuracy of pallets is guaranteed.
Alignment gauge for quick assembly
Alignment gauge for Quick•Point® grid pallets
Description/Type Weightin kg Order No. Price
Alignment gauge 52 6,5 44152
Alignment gauge 96 11,6 44196
Alignment gauge 52 for rent (2 weeks) - 44152-10
Alignment gauge 96 for rent (2 weeks) - 44196-10
This high-precision gauge can be used for aligning Quick•Point® grid pallets to each other by simply inserting the gauge in 2 or 4 plates and removing it again after tightening the mounting screws.
Set up of the 4 middle grid plates with the mounting screws. Locating pins will be used in 2 of the the bores. They are used to align the plates with T-slot on the machine table.
In addition the Alignment Gauge will be used to overlay on all 4 plates.
After the accessible mounting screws are tightened the locating pins need to be removed and exchanged for moun-ting screws.
Now this process will be repeated for any additional plates being added on either side.
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
92
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77Ø 16 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm 52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77
Quick•Point® plate 150 x 116 x 27 mm, for 52 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® plate 150 x 116 x 27 mm,for 52 mm stud distance, without mounting bores
3,4 45151
Set mounting bores depending on customer's request -- 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® plate 150 x 116 x 27 mm, for 52 mm stud distance
Description/Type Weight in kg Order No. Price
Quick•Point® plate 150 x 116 x 27 mm,for 52 mm stud distance
2,9 45150
Quick•Point® 52
Quick•Point® rectangular
See page 113
for suitable
clamps
93
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm 52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
Quick•Point® plate 192 x 156 x 27 mm, for 96 mm stud distance
Description/Type Weight in kg Order No. Price
Quick•Point® plate 192 x 156 x 27 mm,for 96 mm stud distance
5,5 45400
Quick•Point® plate 192 x 156 x 27 mm, for 96 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® plate 192 x 156 x 27 mm,for 96 mm stud distance, without mounting bores
6,0 45401
Set mounting bores depending on customer's request -- 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® 96
Quick•Point® rectangular
See page 113
for suitable
clamps
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
94
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77
Quick•Point® round plate Ø 116 x 27 mm, for 52 mm stud distance
Description/Type Weight in kg Order No. Price
Quick•Point® round plate Ø 116 x 27 mm,for 52 mm stud distance
1,9 45750
Quick•Point® round plate Ø 116 x 27 mm, for 52 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® round plate Ø 116 x 27 mm,for 52 mm stud distance, without mounting bores
2,1 45751
Set mounting bores depending on customer's request -- 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® 52 – Ø116 mm
Quick•Point® round
95
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77
Quick•Point® round plate Ø 157 x 27 mm, for 52 mm stud distance
Description/Type Weight in kg Order No. Price
Quick•Point® round plate Ø 157 x 27 mm,for 52 mm stud distance
3,5 45900
Quick•Point® round plate Ø 157 x 27 mm, for 52 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® round plate Ø 157 x 27 mm,for 52 mm stud distance, without mounting bores
3,8 45901
Set mounting bores depending on customer's request -- 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® 52 – Ø157 mm
Quick•Point® round
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
96
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm12552 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmØ 20 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm
Quick•Point® round plate Ø 176 x 27 mm, for 96 mm stud distance
Description/Type Weight in kg Order No. Price
Quick•Point® round plate Ø 176 x 27 mm,for 96 mm stud distance
4,7 45800
Quick•Point® round plate Ø 176 x 27 mm, for 96 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® round plate Ø 176 x 27 mm,for 96 mm stud distance, without mounting bores
4,8 45801
Set mounting bores depending on customer's request -- 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® 96 – Ø176 mm
Quick•Point® round
97
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm
Quick•Point® round plates, for 96 mm stud distance, without mounting bores
Description/Type Weight in kg Order No. Price
Quick•Point® round pallet, Ø196 mm, 96 mm studdistance, without mounting bores
6,0 45820
Quick•Point® round pallet, Ø246 mm, 96 mm studdistance, without mounting bores
9,5 45840
Set mounting bores depending on customer's request -- 45004
Set alignment grooves depending on customer's request – 45002
Instead of centre bore 12H7, other diameters can be inserted on back side of plate.Price on request.
Quick•Point® 96 – Ø196/Ø246 mm
Quick•Point® round
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
98
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmØ 16 mm
Quick•Point® round plate, Ø 157 x 27 mm. with centre bore Ø 38H7, for 52 mm stud distance
Description/Type Weight in kg Order No. Price
Quick•Point® round pallet, Ø157 mm, with centre bore 38H7, 52 mm stud distance
3,6 45902
Set mounting bores depending on customer's request – 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® pallet with centre bore. Ideal for rotary tables with bar feeder and air/hydraulic connections.Please notice: Clamping via 2 opposing screws.
Quick•Point® 52 – with 38H7 centre bore
99
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm12552 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mmØ 20 mm
Quick•Point® round plates, with centre bore Ø 62H7 , for 96 mm stud distance
Description/Type Weight in kg Order No. Price
Quick•Point® round pallet, Ø176 mm,with centre bore 62H7, 96 mm stud distance
4,1 45802
Quick•Point® round pallet, Ø196 mm,with centre bore 62H7, 96 mm stud distance
5,4 45822
Quick•Point® round pallet, Ø246 mm,with centre bore 62H7, 96 mm stud distance
8,9 45842
Set mounting bores depending on customer's request -- 45004
Set alignment grooves depending on customer's request – 45002
Quick•Point® 96
Quick•Point® 96 – with 62H7 centre bore
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
100
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77Ø 16 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm96
Quick•Point® twin-base 52
Description/TypeWeight in kg
Order No.
Price
Double-sided zero-point clamping,52 mm stud distance
13,8 47220
Twin-base with integrated Quick•Point® system, high stre ngth and sturdy, case-hardened and groundrectangular to 0.01 mm
Quick•Point® twin-base 96
Description/TypeWeight in kg
Order No.
Price
Double-sided zero-point clamping,52 mm stud distance
28 47520
Quick•Point® Twin-Base 52 Quick•Point® Twin-Base 96
101
4 x 90°
Twin-base with integrated Quick•Point® system, high stre ngth and sturdy, case-hardened and groundrectangular to 0.01 mm
Ideal for manual 5-face machining of work piece by turning workholding device with clamped work piece 4x 90degrees using a 3-axis machine tool. Result is high repeat accuracy and controlled process of work piece.
Quick•Point® Twin-Base
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
102
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm 46/77
52 mm
96 mm
Makro•Grip® 5-Achs-SpannerArt. Nr. 47120
Quick•Point® adapter plate, 150 x 126 x 27 mm
Description/Type Weight in kg Order No. Price
Adapter plate, incl. clamping studs Ø20 mm 3,4 45160
Adaptability from large to small –these adapter plates will make it effortless!
For reductions from 96 mm stud distance to 52 mm stud distance
103
52 mm
96 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77
Makro•Grip® 5-Achs-SpannerArt. Nr. 47120
Quick•Point® adapter plates
Quick•Point® round plate, round, Ø 157 x 27 mm
Description/Type Weight in kg Order No. Price
Adapter plate, round, incl. clamping studs Ø20 mm 3,7 45910
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
104
Quick•Point
® Unterbau
Art.-Nr. 44100
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77Ø 16 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm
Sub-base for Quick•Point® pallets – Increase accessibility to work piece on 5-face machine tools
Sub-base for Quick•Point® 52 (150x116 mm)
Description/Type Weight in kg Order No. Price
Height 60 mm 2,5 43060
Height 100 mm 4,2 43100
Sub-base for Quick•Point® 96 (192x156 mm)
Description/Type Weight in kg Order No. Price
Height 60 mm 4,7 44060
Height 100 mm 7,9 44100
Compatible to Quick•Point® pallets 45150 and 45400. Coated aluminum sub-base designed with clearance for easy moun-ting and alignment to table (20H7 bore) or use clamping studs to clamp sub-base on Quick•Point® pallet
Included in delivery: 4x M10 screw + 2x alignment pins to position Quick•Point® plate
Sub-base forQuick•Point® 52
Sub-base forQuick•Point® 96
105
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm
Sub-base for Quick•Point® pallets – Increase accessibility to work piece on 5-face machine tools
Quick•Point® Sub-Base
Sub-Base round for Quick•Point® 96 mm stud distance
Description/Type Weight in kg Order No.
Height 3.94“ (60mm) 6,8 44006
Height 3.94“ (100mm) 11,8 44010
Compatible to Quick•Point® plate 45800 (upper diameter 176mm/lower diameter 246mm). High strength, compact, surface of hard-coated aluminum. Use clamping studs Ø 20 mm to clamp Sub-Base on Quick•Point® plate. Individual mounting bores through the base at the angled location also possible.
Included in delivery: 6 screws M10 + 2 bushings for positioning of Quick•Point® plate
NEW !
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
106
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm
Support pallets 52
Type LxWxH Weight in kg Order No. Price
96 x 96 x 27, 52 mm stud distance 2,0 45275
156 x 156 x 27, 52 mm stud distance 5,2 45277
Use support pallets to adapt and strip down fixtures quickly
Soft support pallets, made of steel – for individual adaptationof fixtures and other devices
Support pallets 96
Type LxWxH Weight in kg Order No. Price
156 x 156 x 27, 96 mm stud distance 5,3 45575
196 x 196 x 27, 96 mm stud distance 8,3 45577
Use support pallets to adapt and strip down fixtures quickly
Quick•Point® support pallets
107
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm96
Quick•Point® gauging pallets
Gauging pallet for precise alignment of Quick•Point® pallets
Gauging pallet 96
Type Order No. Price
for 96 mm stud distance 44296
- Size of Gauge 125mm Square - Case-hardened and ground
Gauging pallet 52
Type Order No. Price
for 52 mm stud distance 44252
- Size of Gauge 100 mm Square- Case-hardened and ground
Recommended for rotating axis or chucks!Pr
äge•
Fix
Mak
ro•G
rip®
Qui
ck•P
oint
®Q
uick
•Tow
erC
lean
•Tec
Aut
omat
ion
Grip
•Fix
108
Mit Schrauben
Place the 4 studs with an accuracy of ± 0.01 mm squared!
Quick•Point® clamping studs – for individual adaptation of yourexisting vices, fixtures or work pieces in our Quick•Point® zero-point clamping system
Mounting of Quick•Point® clamping studs
via threaded bolt via screws
Quick•Point® clamping studs are perfectlysuitable for stripping down or activating fixtures.
Clamping studs for self installation of fixtures
Type Amount Order No. Price
Clamping stud Ø16 mm,for 52 mm stud pitchincl. threaded pin (M8)
1 pc. 45270
Clamping stud Ø20 mm,for 96 mm stud pitchincl. threaded pin (M10)
1 pc. 45570
Utilize studs in vices, fixtures or work pieces and clamp easy and quickly in our precise Quick•Point® pallet system
52 5296 96
Quick•Point® Clamping Studs
109
Makro•Grip®
Makro•Grip®
Quick•Point® Quick-Lock
Quick•Point® Quick-Lock
Description/Type Weight in kg Order No. Price
For Quick•Point® systems 52for rectangular and square plates
0,3 44552
For Quick•Point® systems 96for rectangular and square plates
0,4 44596
Included in delivery: Quick•Point® Quick-Lock, Levers, Shims (4 pcs.)
Quick•Point® Quick-Lock –Simple – quick – secure!Fast actuation system compatible with all square and rectangular plates
closed
opened
NEW !
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
110
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm125Ø 20 mm
NEW !Quick•Point® automation base tower – Thepneumatic-mechanical zero-point clamping system
The matching interfacefor LANG automation systems
Clamping studs are included fora quick change over. In additiona 40H7 centre bore for precisepositioning of the base toweris included
Including premium alumi-num handle bar for a quick change over of the tower
Guide rails guarantee failure-free loading of the base tower(irrespective ofworkpiece weight)
Elevated pneumatic interfacewith optimal accessibility for theautomatic opening, closing andretrieval of clamping situations
Interface adapter for manual operation of the base tower. Can be connected to a pneumatic hose or operated directly
with an air pressure pistol.
Ground, evensurface, easyto clean Highest clamping
force with the paten-ted wedge system
Quick•Point® Automation base tower
Description/Type Weight in kg Order No. Price
Automation base tower, height 80 mm, Ø246 mm (bottom), Ø 176 mm (top), including clamping studs Ø20 mm
12,5 46080
Included in delivery: Handle bar with included clamping studs Ø20 mm
111
Quick•Point® Automation
Mounting option 1:
The Quick•Point® automation base tower comes with clamping studs attached, which allows the machine operator to quickly and precisely ex-change the base tower in seconds with use of our Quick•Point(R) zero-point system. The total height of this clamping set-up is 107 mm (80 mm base tower, 27 mm Quick•Point® plate)
Mounting option 2:
It's also possible to add mounting bores to the angled surface of the aluminum base tower. The bore pattern can be added according to the T-slots of the maching table. Using this method of attaching the base tower directly to the machi-ne table, the set-up height is only 80 mm.
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
112
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77/125
Support pallet, incl. fit bushings
Description/TypeHeight in mm
Diameter in mm
Weightin kg
Order No. Price
Support plate, steel, Ø178 mm + bump stop (without hole pattern)
24 ± 0,02 178 5,8 65192
Colour indicators for bilaterallycorrect insertion
Stable and sturdysteel body
Ergonomic recessed grip for handling system
Equipped with Quick•Point® 96 clamping studs
Automation support plate, Ø178 mmIdeal support system for fixtures,clamping devices or workpieces
Quick•Point® Automation
113
Quick•Point® cover plugs
Description/Type Amount Order No. Price
Quick•Point® cover plugsØ16 mm,for 52 mm stud pitch
1 set(4 pcs.)
45052-20
Quick•Point® cover plugsØ20 mm,for 96 mm stud pitch
1 set(4 pcs.)
45096-20
Cover plug for protection against material polution when not in use.
Quick•Point® plastic cover
Description/Type Amount Order No. Price
Plastic cover Ø20 mm1 set
(20 pcs.)45008
Protects mounting bores against material polution, suitable for both stud pitches (52 mm and 96 mm).
Quick•Point® Clamps
Description/Type Amount Order No. Price
Clamps1 Set
(4 pcs)27084
Clamps are an alternative option to mount Quick•Point® plate 45150 and 45400 to the machine tool table
Quick•Point® Accessories
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
114
Simple zero point clampingwith only one actuation screwper device
Lightweight aluminumbase for ergonomic handling
For fast and precise clamping, clamping studs to fit our 96mm Quick•Point® zero point plates are included.
Longevity andprecision through hardenedfit bushings applicable for LANG
automation systems
Integrated Quick•Point® 52 system on all 3 sides
Tri-Top 3-face-Tombstone – Minimize shutdowntimes for 4 and 5-Axis machines!
115
Quick•Point® Tri-Top
Due to the sturdy and com-pact design our "all-round" vices can be turned by 4x 90° with marginal interference
Featuresand
Benefits
Optimized run times because of minimal tool changes
Made from lightweight aluminum, allows easy handling for set-up outside of machinelow interference with our compact vises
higher capacity with 3 or even 6 workpieces with the use of our dual clamping.
Präg
e•Fi
xM
akro
•Grip
®Q
uick
•Poi
nt®
Qui
ck•T
ower
Cle
an•T
ecA
utom
atio
nG
rip•F
ix
116
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm46/77Ø 16 mm
52 max. 100 NmØ 16 mm 46 max. 70 N ± 0.02 mm96
Tri-Top 3-face-Tombstone
Description/Type Dimensions Weight in kg Order No. Price
Tri•Top 3-face tombstone 52Height: 167 mm
Diameter: 178 mm(without bump stops)
5,5 45352
Tri-Top 3-face-Tombstone
Upperinterface:
Lowerinterface:
Maximum lengthof base body:
130 mm
Set-up example:Tri•Top with 3 Makro•Grip®
5-Axis Vises 77(Part # 47120, see page 30)
Recommended