View
214
Download
0
Category
Preview:
Citation preview
7/28/2019 S-Class Catalog 2011
1/19
SOFT SeaTed ball valveS V A L V E S
7/28/2019 S-Class Catalog 2011
2/19
S-ClaSS COre TeChnOlOgy
OPTIOnS
At the heart o every Gosco Valve lies S-Class
Core Technology. Each confguration starts lie as
an S-Class On/O Valve, and by adding optional
components, treatments/coatings, and accessories
many applications can be achieved. This provides you
with dramatically shorter lead times, quicker setup and
an outstanding product that will outperorm in some o
the most demanding applications.
7/28/2019 S-Class Catalog 2011
3/19
Clearview Mounting Pad
Lockable Handle Option
Upper Stem Guide
Lower Stem Guide
Independently Live
Loaded Lower Packing
Extended Bonnet for Insulation
Optional Fugitive Emission Port(not visible)
Live Loaded Body Studs
Fully Encapsulated End Cap Seals
Wide Variety of Seat Options
Fully Grounded Stem, Ball & Body
Complete Range of Body & TrimMaterials (incl. high alloys) Multiple End Connections
(incl. flanged, welded, threaded,
sanitary or customer specified)
Independently Live
Loaded Upper Packing
7/28/2019 S-Class Catalog 2011
4/19
The Sealmaster is a patented stem seal that is comprised o three
parts - an upper stem seal, compression ring and a thrust seal. When
the Sealmaster is tightened, the compression ring squeezes the upper
stem seal against the valves body. The Sealmaster stem seal can be
retightened to recommended torques.
SealmaSTer STem Seal
Compression Ring
Upper Stem Seal
Thrust Seal
7/28/2019 S-Class Catalog 2011
5/19
The Clearview Mounting Pad is a patented design that combines a cast
bracket with an ISO 5211 mounting pad. The pad is raised and open, keeping
the stem fats visible. Packing adjustments are accessible without removing
the actuator or insulation.
ClearvIew mOunTIng Pad
7/28/2019 S-Class Catalog 2011
6/19
The extended bonnet is perect or insulated lines. There is a minimum o 2 between the
top o the fange and bottom o the Clearview Mounting Pad. Even with insulation in place,
the stem fats are visible, packing adjustments are accessible, and the actuator is raised
away rom elevated process temperatures, preventing damage to the actuator seals.
exTended bOnneT
7/28/2019 S-Class Catalog 2011
7/19
leThal ServICeS
The ugitive emissions port is located between the Sealmaster and the upper packing.
I leakage occurs past the Sealmaster, the upper packing is designed to contain the leak.
For lethal applications, the ugitive emissions port can be purged with an inert gas, and a
pressure switch can monitor leakage. It is very important that the purge pressure is higher
than the process pressure because this will prevent the process media rom escaping.
7/28/2019 S-Class Catalog 2011
8/19
ogenicThe S-ClassCryogenic Valve can handletemperatures as low as -270C (-454F).
A bolt-on retrot kit is also available.
7/28/2019 S-Class Catalog 2011
9/19
ed valveS-Class Block & Bleed Valves:
Single Block & Bleed with live loaded seats,
and Double Block & Bleed congurations.
7/28/2019 S-Class Catalog 2011
10/19
ontrolThe S-Class Vari-V Ball Valve oers
precise fow control through a specic
prole that is machined into the ball.
7/28/2019 S-Class Catalog 2011
11/19
S-Class 3-Way Diverter Valves provide bottomentry with fow to the let or right ports.
Single-L or 180, Double-L or 90.
iverter
7/28/2019 S-Class Catalog 2011
12/19
At the heart o every Gosco control valve is the Vari-V ball. The prole o the V-ball determines the fow
characteristic o the valve and can be changed to suit the application. 10, 30, 60 and 90 V-balls are the
most commonly used, but several other proles are readily available. The Linear-V is a slot in the ball that
can be machined or precise fow requirements. The Filler-V is used when you need maximum fow or lling
ollowed by precise fow to accurately control the levels. The High Turndown-V maximizes fow in the open
position, and provides ne fow control when the valve is partially closed. The transition between high fow
and ne control with the Vari-V is extremely smooth.
COnTrOl Freak
Linear-V 10 V-Ball
High Turndown-V 30 V-Ball
Filler-V 60 V-Ball
90 V-Ball
7/28/2019 S-Class Catalog 2011
13/19
Custom V-balls are available or applications that possess specic fow requirements
that can not be met with the standard V-balls. Using Computational Fluid Dynamics
(CFD), we can create a V-ball with a specic prole to t any application. Anti-cavitation
trim is also available. For examples o custom V-ball applications, including videos and
specications, visit www.goscovalves.com
Free SPIrIT
7/28/2019 S-Class Catalog 2011
14/19
CFd analySIS
Computational Fluid Dynamics (CFD) is used to calculate the fow through
the trim o a valve. It determines locations o high velocity and high fow, and
assists in trim engineering or specic applications where velocities need to be
controlled. CFD is also used to determine the fow coecient (Cv) o Gosco
Vari-V balls and aids in designing them to custom specications.
7/28/2019 S-Class Catalog 2011
15/19
Valve Size Vari-V 100% 90% 80% 70% 60% 50% 40% 30% 20% 10%Non Vari-V
ball Cvs
1/2
10306090
2.955.76
10.1315.28
2.363.996.939.83
1.943.154.566.29
1.532.223.184.10
1.191.462.022.57
0.840.891.321.58
0.510.510.730.84
0.360.320.330.34
0.000.020.030.03
0.000.000.000.00
23
3/4 S.P.
10
306090
3.01
4.968.1611.18
2.22
3.625.847.73
1.84
2.894.545.57
1.31
2.133.003.87
1.01
1.451.822.39
0.71
0.831.181.36
0.49
0.530.670.83
0.12
0.130.140.15
0.00
0.040.040.04
0.00
0.000.000.00
15
3/4
10306090
4.278.43
16.8427.63
3.556.45
11.0917.52
2.704.887.59
11.28
2.133.515.126.70
1.552.183.174.14
1.191.492.092.47
0.660.790.951.29
0.370.380.410.46
0.030.030.030.03
0.000.000.000.00
45
1 S.P.
10306090
4.037.63
15.8219.37
3.295.93
10.8013.37
2.484.597.479.17
2.023.304.746.28
1.502.383.184.07
0.981.331.962.47
0.580.720.951.44
0.340.350.360.60
0.010.010.010.02
0.000.000.000.00
30
1
10306090
5.8812.3426.9140.62
4.979.86
17.3726.78
4.257.50
12.4717.96
3.285.368.19
11.74
2.143.895.457.48
1.742.413.454.49
1.061.632.162.55
0.840.950.971.09
0.220.240.260.28
0.000.000.000.00
77
1 1/4 S.P.
10306090
5.7410.7523.3037.20
5.099.40
15.5926.09
4.106.63
11.0317.26
3.135.048.11
10.44
2.323.555.046.91
1.592.303.204.37
1.091.541.962.38
0.660.680.951.04
0.210.230.240.26
0.000.000.000.00
46
1 1/4
10306090
10.2420.1039.2670.96
6.8716.0927.2544.32
6.8612.1719.3629.44
5.228.66
13.1118.79
3.736.098.82
11.83
2.864.225.607.44
2.232.553.254.51
1.191.671.752.32
0.520.560.560.75
0.000.000.000.00
126
1 1/2 S.P.
10306090
9.9020.1337.0966.22
8.0215.8927.3843.48
6.7212.1219.0128.48
5.038.88
13.5618.44
4.426.589.17
12.28
3.224.506.108.08
1.902.383.454.51
0.781.001.241.68
0.360.260.280.35
0.000.000.000.00
82
1 1/2
10306090
12.7628.6055.7396.99
11.0622.3540.1662.87
7.6515.2326.5438.90
5.9411.3817.5324.95
5.218.30
11.8715.69
3.505.487.319.73
2.412.463.075.46
0.891.371.592.37
0.000.460.340.62
0.000.000.000.00
192
2 S.P.
10306090
13.4127.1549.5680.14
10.2220.9235.8152.63
8.1215.3624.7735.60
5.9811.5417.2023.75
4.747.25
10.8814.43
3.884.907.219.03
2.433.434.105.42
1.281.371.712.07
0.000.410.370.00
0.000.000.000.00
120
2
10306090
21.5347.4792.06
173.40
16.9837.4669.69
110.49
16.0127.3249.0873.44
12.4720.7531.9248.50
10.0714.1221.3629.56
5.269.65
13.9818.56
4.436.538.52
11.54
2.373.054.215.13
0.791.151.311.44
0.000.000.000.00
358
2 1/2 S.P.
10306090
18.6341.7483.22
139.40
14.8233.5860.0489.84
12.2826.1644.3561.63
8.9818.5229.9841.32
7.0013.6020.4127.57
5.018.59
12.5617.68
3.094.717.339.76
1.972.563.715.27
0.490.530.650.99
0.000.000.000.00
240
2 1/2
10306090
35.1679.21
150.59253.06
29.3563.94
107.54180.69
24.6049.2280.65
119.78
19.6834.3252.9384.32
14.7025.2434.8950.76
10.6315.9022.7232.69
7.639.98
14.8721.11
3.854.986.44
11.67
1.322.162.021.79
0.000.000.000.00
611
3 S.P.
10306090
34.9373.79
138.23240.46
23.8856.60
101.69154.55
19.8943.6774.53
114.28
16.2533.4251.9473.22
13.5622.8734.9447.24
10.5215.2421.5531.57
7.6010.2213.9817.96
3.996.827.69
10.50
2.182.472.144.49
0.000.000.000.00
350
3
10
306090
47.02
105.15190.26388.90
32.65
80.57136.08235.03
26.34
58.10112.14157.48
19.84
42.9082.2299.49
15.89
29.9654.1064.78
12.27
19.5827.6038.40
7.97
12.1415.8022.20
3.98
5.0413.5411.64
1.81
1.961.432.10
0.00
0.000.000.00
858
4 S.P.
10306090
44.0795.43
171.46283.27
33.6477.54
139.82208.78
27.1657.24
103.63147.71
21.8542.3468.8698.21
16.3728.9547.1262.96
11.6119.7727.8041.66
8.4613.0516.7925.34
4.826.047.85
10.82
1.662.062.073.15
0.000.000.000.00
607
4
10306090
58.97160.29332.17652.17
52.74131.67243.98401.89
43.58100.78174.60262.88
33.5272.91
118.86170.63
25.9353.7181.15
111.42
18.1635.1051.8073.39
11.1219.4924.7943.49
7.4210.7315.3424.32
3.663.906.487.20
0.000.000.000.00
1512
6 S.P.
10306090
71.0164.0270.0409.0
58.0129.0213.0329.0
45.095.0
163.0244.0
35.070.0
115.0166.0
26.051.076.0
110.0
20.036.051.072.0
13.022.031.044.0
7.011.015.022.0
3.14.14.87.4
0.000.000.000.00
1055
6
1030
6090
148.0367.0
816.01292.0
112.0286.0
568.0890.0
91.0205.0
414.0581.0
76.0146.0
272.0382.0
55.0104.0
177.0234.0
40.070.0
110.0145.0
30.047.0
67.088.0
19.025.0
34.045.0
7.49.0
10.014.4
0.000.00
0.000.00
3664
8 S.P.
10306090
134.0338.0648.0
1106.0
112.0270.0513.0768.0
92.0209.0378.0538.0
86.0159.0260.0360.0
54.5109.0175.0242.0
35.575.0
112.0148.0
28.046.065.082.0
17.024.032.042.0
6.88.7
10.013.0
0.000.000.000.00
2060
varI-v COnTrOl valve Cv valueS
7/28/2019 S-Class Catalog 2011
16/19
X
D
C
B
E
G
K
H J
XA
F
SEE NOTE 1
SECTION X-X
I
) Please visit goscovalves.com to download up-to-date dimensional information.
1) For coupling manufacture, all dimension Bs are 0.003
2) Valve weights and dimension D are based on a 150# class assembly
* *
*please contact Gosco Valves for up-to-date 3-Way Diverter Valve and split body dimensions.
Cryogenic Extension
Valve
SizeA B C D E F G H I J
K ISO 5211MTG
patternWeight2
NPT 150# 300#
1/2 1.88/4.78 0.256/0.66 0.39/0.99 1.75/4.45 5.77/14.66 2.36/5.99 0.38/0.97 3.88/9.86 17.58/44.65 7.52/19.10 3.27/8.31 4.25/10.80 5.50/13.97 F04 3.70/1.68
3/4 SP 1.88/4.78 0.256/0.66 0.39/0.99 1.94/4.93 5.77/14.66 2.36/5.99 0.38/0.97 3.88/9.86 17.58/44.65 7.71/19.58 3.79/9.63 4.61/11.71 6.00/15.24 F04 4.30/1.95
3/4 1.88/4.78 0.256/0.66 0.39/0.99 1.94/4.93 5.90/14.99 2.36/5.99 0.38/0.97 4.00/10.16 17.71/44.98 7.84/19.91 3.79/9.63 4.61/11.71 6.00/15.24 F04 5.60/2.54
1 SP 1.88/4.78 0.256/0.66 0.39/0.99 2.13/5.41 5.90/14.99 2.36/5.99 0.38/0.97 4.00/10.16 17.71/44.98 8.03/20.40 4.31/10.95 5.00/12.70 6.50/16.51 F04 5.80/2.63
1 2.20/5.59 0.335/0.86 0.45/1.14 2.13/5.41 6.26/15.90 3.22/8.18 0.50/1.27 4.17/10.59 18.07/45.90 8.39/21.31 4.31/10.95 5.00/12.70 6.50/16.51 F05 10.7/4.85
1 1/4 SP 2.20/5.59 0.335/0.86 0.45/1.14 2.31/5.87 6.26/15.90 3.22/8.18 0.50/1.27 4.17/10.59 18.07/45.90 8.57/21.77 4.60/11.68 5.50/13.97 7.00/17.78 F05 11.6/5.26
1 1/4 2.20/5.59 0.335/0.86 0.45/1.14 2.31/5.87 6.44/16.36 3.22/8.18 0.50/1.27 4.35/11.05 18.25/46.36 8.75/22.23 4.60/11.68 5.50/13.97 7.00/17.78 F05 12.3/5.58
1 1/2 SP 2.20/5.59 0.335/0.86 0.45/1.14 2.50/6.35 6.44/16.36 3.22/8.18 0.50/1.27 4.35/11.05 18.25/46.36 8.94/22.71 5.07/12.88 6.50/16.51 7.50/19.05 F05 14.1/6.40
1 1/2 2.68/6.81 0.433/1.12 0.51/1.30 2.50/6.35 7.40/18.80 3.54/8.99 0.62/1.57 5.00/12.70 19.21/48.79 9.90/25.15 5.07/12.88 6.50/16.51 7.50/19.05 F05/F07 19.7/8.94
2 SP 2.68/6.81 0.433/1.12 0.51/1.30 3.00/7.62 7.40/18.80 3.54/8.99 0.62/1.57 5.00/12.70 19.21/48.79 10.40/26.42 5.59/14.20 7.00/17.78 8.50/21.59 F05/F07 23.0/10.4
2 2.68/6.81 0.433/1.12 0.51/1.30 3.00/7.62 7.76/19.71 3.54/8.99 0.62/1.57 5.34/13.56 19.57/49.71 10.76/27.33 5.59/14.20 7.00/17.78 8.50/21.59 F05/F07 26.3/11.9
2 1/2 SP 2.68/6.81 0.433/1.12 0.51/1.30 3.50/8.89 7.76/19.71 3.54/8.99 0.62/1.57 5.34/13.56 19.57/49.71 11.26/28.60 6.84/17.37 7.50/19.05 9.50/24.13 F05/F07 32.0/14.5
2 1/2 3.86/9.80 0.591/1.50 0.63/1.60 3.50/8.89 8.56/21.74 4.92/12.50 0.88/2.24 5.93/15.06 20.37/51.74 12.06/30.63 6.84/17.37 7.50/19.05 9.50/24.13 F07/F10 46.4/21.1
3 SP 3.86/9.80 0.591/1.50 0.63/1.60 3.75/9.53 8.56/21.74 4.92/12.50 0.88/2.24 5.93/15.06 20.37/51.74 12.31/31.27 7.59/19.28 8.00/20.32 11.13/28.27 F07/F10 47.0/21.3
3 3.86/9.80 0.591/1.50 0.63/1.60 3.75/9.53 9.07/23.04 4.92/12.50 0.88/2.24 6.44/16.36 20.88/53.04 12.82/32.56 7.59/19.28 8.00/20.32 11.13/28.27 F07/F10 64.0/29.0
4 SP 3.86/9.80 0.591/1.50 0.63/1.60 4.50/11.43 9.07/23.04 4.92/12.50 0.88/2.24 6.44/16.36 20.88/53.04 13.57/34.47 N/A 9.00/22.86 12.00/30.48 F07/F10 78.0/35.4
4 4.72/11.99 0.709/1.80 0.61/1.55 4.50/11.43 10.67/27.10 5.63/14.30 1.00/2.54 7.29/18.52 22.48/57.10 15.17/38.53 N/A 9.00/22.86 12.00/30.48 F10/F12 93.0/42.2
6 SP 4.72/11.99 0.709/1.80 0.61/1.55 5.50/13.97 10.67/27.10 5.63/14.30 1.00/2.54 7.29/18.52 22.48/57.10 16.17/41.07 N/A 10.50/26.67 15.88/40.34 F10/F12 103/46.72
6 7.00/17.78 1.13/2.87 1.08/2.74 7.85/19.94 15.25/38.74 8.25/20.96 1.50/3.81 11.00/27.94 27.06/68.73 23.10/58.67 N/A 15.50/39.37 15.88/40.34 F12/F16 357/161.9
8 SP 7.00/17.78 1.13/2.87 1.08/2.74 7.85/19.94 15.25/38.74 8.25/20.96 1.50/3.81 11.00/27.94 27.06/68.73 23.10/58.67 N/A 18.00/45.72 19.75/50.17 F12/F16 396/179.6
S-ClaSS dImenSIOnS
in, lb/ cm, kg
7/28/2019 S-Class Catalog 2011
17/19
Valve SizeTFM-1600 / carbon-flled PTFE Devlon PEEK / Graphite
Standard Port Full Port Standard Port Full Port Standard Port Full Port
n/a 120 n/a 140 n/a 150
120 150 140 170 150 200
1 150 200 170 250 200 300
1 200 260 250 320 300 400
1 260 330 320 380 400 520
2 330 450 380 550 520 650
2 450 900 550 1050 650 1450
3 900 1800 1050 2100 1450 2750
4 1800 3300 2100 3750 2750 4500
6 3300 4200 3750 5600 4500 5700
8 4200 5600 5700
100 200 300 400 500 600 700 800 900 1000
temperature (F) (C)
pressure
(psi)(bar)
0
100
200
300
400
500
600
700
800
900
1000
38 93 148 204 260 316 371 426 482 538
7
14
21
28
34
41
48
55
62
69
Saturated Steam
1000 WOG
300#
150#PEEK
1100593
TFM-1600 /carbon filled PTFE
Celazole MetalSeats
Devlon Encapsulated
Graphite
For temperatures over 1100F
(538C) and/or pressures over
1000psi (69bar), please refer to
Gosco M-Class Valves
www.mclassvalve.com
M-Class ValVes
*Torque values are based on a shut-off pressure of 300psi, calculations are based on clean water @ 70F
Values will increase linearly by 50% between 300psi and 1000psi shut-off
Please contact Gosco Valves for 3-Way Diverter and Gosco Cr yogenic Valve torques.
gOSCO ball valve TOrqueS* (In.lbS)
PreSSure/TemPeraTure CharT
7/28/2019 S-Class Catalog 2011
18/19
ANSI/ASME B1.3M screw thread gauging system or dimensional acceptabilityANSI/ASME B16.10 ace-to-ace and end-to-end dimensions o valvesANSI/ASME B16.34 valves-fanged, threaded and welding endsANSI/ASME B16.5 pipe fanges and pipe ttingsASTM A193/A 194M-96b standard specications or alloy steel and stainless steel bolting materials or high temperature serviceASTM A194/A 194M-96 standard specications or carbon and alloy s teel nuts and bolts or high pressure and high temperature serviceMSS SP-25 standard marking system or marking valves, ttings, fanges and unionsCSA B51-95 boiler, pressure vessel and pressure piping codeAPI 598 valve inspection and testingCRN Canadian Registration Number (0911851.5)ISO 9001:2000API 607 5th edition
TV section 3.1.8.4
Size Port Connection Body Trim Seat Packing Ball Handle Special
01 = valveS = standard
portNPT = national pipe thread
SS = 316/316LStainless Steel
SS = 316 SS stemand ball
TFE =TFM-1600, 2ndgeneration PTFE
CHV =PTFE chevron
10V = 10 Vari-V T = tee handleFE = drilled fugitive
emission port
02 = valve F = full port SWE = socket weld ends CS = Carbon SteelS7 = 17-4PH stem,
316 SS ballTCF = 25% carbon
lled PTFEGRA =
standard graphoil30V = 30 Vari-V
B = bare shaft(for actuation)
DL = Double-L PortSL = Single-L Port
03 = 1 valve T = true port BWE = butt weld ends A2 =Alloy 20K7 = 17-4PH stem,
Kolsterized ballUMP = UHMWPE
CRY =Cryogenic Valve3
60V = 60 Vari-V G = gear box O2 = oxygen cleaned
04 = 1 valve 150 = 150# anged HC = Hastelloy C I7 = Inconel 718 stem PEK = carbon lled PEEK 90V = 90 Vari-V L = lever FS = re safe
05 = 1 valve 300 = 300# anged DP = DuplexHC =Hastelloy
C276VPK = FDA approved
virgin PEEK LNV = linear Vari-V K = lock-out bracket F1 = FS + FE
06 = 2 valve 600 = 600# anged SP = Super Duplex A2 =Alloy 20 DEV = Devlon HTV = high turndown
Vari-VR = round handle F2 = FS + O2
07 = 2 valve 15k= 1500# anged M4 = Monel 400 KM = K Monel CLZ = Celazole FLV = ller Vari-V 1 =T + K S8 = FE + O2
08 = 3 valve S15 = split body,
150# anged5M5 = Monel 500 SD = Super Duplex
EGR = encapsulatedgraphite
ARC = arcuate cut ball 2 = G + K VC = vacuum
09 = 4 valve XBW = extended butt
weld endsT2 =Titanium, Gr. 2 HB = Hastelloy B CV = Cavity Filler4 DBL = drilled ball 3 = L + K NS = no special
10 = 6 valve OTH = other T3 =Titanium, Gr. 3 I6 = Inconel 625 OTH = other OTH = other 4 = R + K OT = other
11 = 8 valve T5 = Titanium, Gr. 5 OT = other NON = regular ball O = other
OT = other OT = other
deSIgn SPeCIFICaTIOnS
ParT number OrderIng SySTem1
E.G. PART NUMBER 02F150-A2A2-TFECHV-10VBFE2
) Please visit goscovalves.com to download up-to-date part ordering inormation.
1) Block and bleed valves have dierent part numbers. Please contact Gosco Valves or urther inormation.
2) Example valve description: 3/4 valve, ull port, 150# fanged, CN7M body, Alloy 20 ball and stem, TFM-1600 seats, PTFE chevron packing, 10 Vari-V ball, drilled ugitive emission port
3) Specic to the Gosco Cryogenic Valve part number. Includes standard cryogenic extension, PTFE chevron packing, and a drilled ball or pressure relie.
4) CVT = cavity ller TFM-1600, CVU = cavity ller UHMWPE, CVD = cavity ller Devlon, CVC = cavity ller 25% carbon-lled PTFE
5) Only available on ull port valves
*4
7/28/2019 S-Class Catalog 2011
19/19
.comGOSCOVALVES
1272 Spees rd uit 4Oakvie On l6l 5T9
905.825.2627
Recommended