View
7
Download
0
Category
Preview:
Citation preview
KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
SORALUCE FR 16000
Traveling column milling center
Manufacturer SORALUCE Model FR 16000 Year of manufacture 2001 Control HEIDENHAIN TNC 430 Machine number 5124 Travels X – 16.000 mm / Y – 3.200 mm / Z – 1.500 mm Spindle speed 4.000 rpm with 2-stage gearbox from ZF
Last geometry protocol was made in August 2017
2 - SORALUCE FR 16000
TECHNICAL DATA
Milling column X axis (longitudinal) 16.000 mm
Y axis (vertical) 3.200 mm
Z axis (transversal) 1.500 mm
Guideway length 18.500 mm
Guideway width 1.400 mm
Deepest milling position of the spindle nose measured from the ground (Head horizontal)
Orthogonal headstock: 1.050 mm Drill head: 1.300 mm
Low column version 870 x 900 x 2.625 mm 3.000 kg
High column version 870 x 900 x 3.025 mm 3.500 kg Spindle motor drive Motor performance orthogonal headstock 37 kW
Motor performance drill head 37 kW
Holder ISO 50 / DIN 69871-AD
Speeds orthogonal headstock 8'8÷250/1.000 ÷ 4 .000 rpm
Speeds drill head 17'6 ÷ 231/923 ÷ 2.000 rpm Rapid traverse and feed Feed range 2 ÷ 5.000 mm/min
Rapid traverse X/Y/Z axes 15.000 mm/min
Power of the feed motor X axis 2 x 41‘5 Nm
Power of the feed motor Y axis 41‘5 Nm
Power of the feed motor Z axis 41‘5 Nm
Weight, approx. 47.000 kg Tool holder
ISO SK-50 DIN 69871-AD
Pull studs DIN 69872, form A
Air supply to the machine 300 L/min at 4‘5 bar
Low pressure cooling system 50 L/min
Capacity of the container 1.000 l
Power / Speed diagram
3 - SORALUCE FR 16000
Torque / Speed diagram
4 - SORALUCE FR 16000
Tools Taper DIN 69871 - A50
Draw bar DIN 69872 – A28
Diameter (adjacent positions free) 200 mm
Diameter (adjacent positions occupied) 120 mm
Max. length 400 mm
Max. weight 20 kg
Maximum weight of all tools in the magazine 480 kg
Magazine Number of tools 60
Drive hydraulic- motor
Motor torque 260 Nm
Gear reduction i : 1/4.5
Pressure 70 bar
Flow rate 22 l/min
Linear chain speed 15.5 m/min
Stopping system delay detector
Position keeping system hydro-mechanic barrier
Position keeping system control Microruptor
Positioning control detector
Tool barrier balls and feathers
Unlock tool hydraulic / hand lever
Tool counter detector
Tool detection photocell
„Origin“ control (tool no. 1) Detektor
5 - SORALUCE FR 16000
6 - SORALUCE FR 16000
Tool holder
Pull studs
7 - SORALUCE FR 16000
EQUIPMENT
High-performance milling head with 1° pitch and oil cooling
Fixed milling boring head
Tool changer for 60 tools
Pick-up station for tool changer heads
CNC rotary and sliding table (size 3.000 x 2.500 mm / Loading 40t / motor displacement in Z 1.500 mm)
2 x Angle tables (size 4.000 x 1.200 x 1.000 mm)
Clamping table (size 1.500 x 3.600 mm)
Internal cooling 20 bar pressure
2x chip conveyors longitudinal and transversal
Measuring system M&H
Paper band filter unit
Clamping field (size 7.000 mm x 2.500 mm x 500 mm)
Electronic hand wheel HEIDENHAIN
User guide / Documentation
Machine parameters on CD
MACHINE PICTURES
8 - SORALUCE FR 16000
9 - SORALUCE FR 16000
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
Thank you very much for your interest
KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
Recommended