View
1
Download
0
Category
Preview:
Citation preview
tab
& m
agn
etic
co
rner
tra
cks
49
CurveTipologia di curve 1) Magnetiche - 2) Tab - 3) Bevel
Caratteristiche delle curve magnetiche La curva magnetica rappresenta il sistema più efficace ed affidabile per trasportatori con catene a cerniera.Le nostre curve magnetiche sono prodotte da lastre di UHMW-PE di elevata qualità con magneti permanenti alloggiati all’interno della lastra. I
magneti mantengono la catena nella via tracciata in curva garantendo la planarità della superficie di trasporto della catena, migliorando la stabilitàdel prodotto trasportato.
Vantaggi - Igiene: La catena sulla via di scorrimento in curva può essere facilmente sollevata per consentire più facilmente pulizia e manutenzione.Intercambiabilità: Catene in plastica e in acciaio possono essere utilizzate sulle nostre curve semplificando progetto/realizzazione del
trasportatore e consentendo di ridurre scorte di ricambi a magazzino. Materiali: La parte superiore delle nostre curve è ottenuta da UHMW-PE di elevata qualità che consente una più lunga durata di catene e delle stesse curve. Attrito: I magneti vengono accuratamente selezionati
e posizionati per garantire il campo magnetico più idoneo al mantenimento della catena nella sede. Un campo magnetico troppo elevatoaumenta l’attrito e riduce la durata di curva e catena.
Corner TracksTypes of Corner Track 1) Magnetic - 2) Tab - 3) Bevel
Characteristics of Magnetic Corner Tracks The magnetic corner track is the most effective and reliable system for the tabletop conveyor design. Our magnetic corner tracks are made of high quality UHMW – PE with permanent magnets embedded
in the curve. The magnets hold the chain on the corner track and this provides a flat carrying surface for the chain; thus,improving product stability and support for the conveyor.
Benefits - Hygiene: Chains on the magnetic corner tracks can be easily lifted such that it is easier for cleaning andmaintenance. Inter-changeable: Plastic and S.S. chains can be used on the curve thus reducing inventory and simpler
conveyor design. Materials: The upper track of the corner tracks uses high quality UHMW-PE which gives a longerwear life for both the chain and the curve. Frictional force: Magnets are carefully selected and positioned to
provide the correct magnetic field which is just sufficient to keep the chain down. Too high a magnetic forcewill increase the frictional force and reduces wear life of both chains and curve.
KurvenführungenTypen 1) Magnet - 2) TAB - 3) Schwalbenschanz
Charakteristik der Magnet-Kurvenführung Die Magnet-Kurvenführung ist das effektivste undbewährteste System für Transporteure mit Scharbierbandketten. Unsere Magnetkurven sind
aus hochwertigem UNME-PE mit permanenten in die Führung eingebetteten Magnetenausgeführt. Die Magnete halten die Scharnierbandkette in der Führung und dies resultiert
in einem ruhigen Lauf der Kette, damit wird eine bessere Produktstabilität erreicht.Vorteile - Hygiene: zur Reinigung können die Scharnierband-Ketten einfach, ohne
großen Aufwand, aus der Führung herausgenommen werden. Dies erspart Zeitund verkürzt die Standzeiten. Versatilität: Kunststoff- als auch Edelstahl-
Scharnierband-Ketten können mit dieser Kurvenführung verwendetwerden, dies vereinfacht die Konstruktion des Transporteurs und
reduziert die Lagerhaltung. Materialien: Das Oberteil derMagnetkurve ist aus hochwertigem UHMW-PE gefertigt und
bietet eine längere Standzeit nicht nur für die Führungsondern auch für die Scharnierbandkette. Reibung: Die
Magnete sind so angeordnet und ausgewählt um einhomogenes und konstantes Magnetfeld zu
erzeugen um ein ruhiges und rückenfreiesLaufen der Kette zu gewährleisten.
ww
w.m
ove
xii.co
m
50
pag. 57
Series 880-881 Rm750
pag. 56
Series 880-881 Rm750
pag. 55
Series 880-881 Rm500
pag. 54
Series 880-881 Rm500
pag. 53
Series 880-881 Rm500
pag. 52
Series 880-881 Rm500
pag. 63
Series 880-881K750 - Rm860/750/1000
pag. 62
Series 880-881K750 - Rm610
pag. 61
Series 880-881K450 - Rm610
pag. 60
Series 880-881K450 - Rm500
pag. 59
Series 880-881 Rm860
pag. 58
Series 880-881 Rm750
pag. 69
Series 882-8857K1200 - Rm860
pag. 68
Series 882-8857K1000 - Rm860
pag. 67
Series 882-8857K750 - Rm1000
pag. 66
Series 882-8857K750 - Rm860
pag. 65
Series 882-8857K750 - Rm750
pag. 74
Series 251M
pag. 73
Series 250M-260M
pag. 72
Series LBP 882K1200 - Rm860
pag. 71
Series LBP 882K1000 - Rm860
pag. 70
Series LBP 882K750 - Rm860
pag. 64
Series 882-8857K750 - Rm610
tab
& m
agn
etic
co
rner
tra
cks
51
Curve magnetiche / Magnetic curves / Magnet Kurven
pag. 76
Series 882K750 - K1000 - K1200
pag. 75
Series 880-881K325 - K450 - K750
Curve Tab / Tab curves / Tab Kurven
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
85IN & OUTAVAILABLE ALSO125 mm - 50 mm 10
0
28
48
54 18
1 TRACK
68
44
100
6327
13.5
MULTI TRACK
W (mm)
48 68
50 85
44
2763
236
54315428
Curva Larghezza Base = 100 mm; Passo = 85 mm / Curve Basic Width = 100 mm; Pitch = 85 mm / Kurve Basisbreite = 100 mm; Teilung = 85 mm
Rm=500
100
Part 15° 30° 45° 60° 75° 90° Tracks W701701701701701701701701
7011111470111124701111347011114470111154701111647011117470111184
7011121470111224701112347011124470111254701112647011127470111284
7011131470111324701113347011134470111354701113647011137470111384
7011141470111424701114347011144470111454701114647011147470111484
7011151470111524701115347011154470111554701115647011157470111584
7011161470111624701116347011164470111654701116647011167470111684
100185270355440525610695
12345678
Magnetic System
Chain reference879M K325880M K325880M K330881M K325881M K330
52 Product Catalog www.movexii.com
880-881 M6 Series
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 53www.movexii.com
880-881M7 SeriesMateriale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
85IN & OUTAVAILABLE ALSO125 mm - 50 mm
28
40
54 18
1 TRACK
68
44
100
5527
13.5
MULTI TRACK
W (mm)
48 68
50 85
44
2763
236
54315428
Curva Larghezza Base = 100 mm; Passo = 85 mm / Curve Basic Width = 100 mm; Pitch = 85 mm / Kurve Basisbreite = 100 mm; Teilung = 85 mm
Rm=500
Part 15° 30° 45° 60° 75° 90° Tracks W701701701701701701701701
7011111070111120701111307011114070111150701111607011117070111180
7011121070111220701112307011124070111250701112607011127070111280
7011131070111320701113307011134070111350701113607011137070111380
7011141070111420701114307011144070111450701114607011147070111480
7011151070111520701115307011154070111550701115607011157070111580
7011161070111620701116307011164070111650701116607011167070111680
100185270355440525610695
12345678
Magnetic System
Chain reference879M K325880M K325880M K330881M K325881M K330
100
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
85IN & OUTAVAILABLE ALSO125 mm - 50 mm - without 10
0
33
48
54 23
1 TRACK
68
44
110
6327
13.5
MULTI TRACK
W (mm)
48 68
55 85
44
2763
236
54315433
Curva Larghezza Base = 110 mm; Passo = 85 mm / Curve Basic Width = 110 mm; Pitch = 85 mm / Kurve Basisbreite = 110 mm; Teilung = 85 mm
Rm=500
Part 15° 30° 45° 60° 75° 90° Tracks W711711711711711711711711
7111111471111124711111347111114471111154711111647111117471111184
7111121471111224711112347111124471111254711112647111127471111284
7111131471111324711113347111134471111354711113647111137471111384
7111141471111424711114347111144471111454711114647111147471111484
7111151471111524711115347111154471111554711115647111157471111584
7111161471111624711116347111164471111654711116647111167471111684
110195280365450535620705
12345678
Magnetic System
Chain reference879M K325880M K325880M K330881M K325881M K330
54 Product Catalog www.movexii.com
880-881 M10 Series
110
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 55www.movexii.com
880-881M4 SeriesMateriale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
85IN & OUTAVAILABLE ALSO125 mm - 50 mm - without 10
0
33.5
48
54 23.5
1 TRACK
68
44
111
6327
13.5
MULTI TRACK
W (mm)
48 68
55.5 85
44
2763
236
54315433.5
Curva Larghezza Base = 111 mm; Passo = 85 mm / Curve Basic Width = 111 mm; Pitch = 85 mm / Kurve Basisbreite = 111 mm; Teilung = 85 mm
Rm=500
Part 15° 30° 45° 60° 75° 90° Tracks W712712712712712712712712
7121111471211124712111347121114471211154712111647121117471211184
7121121471211224712112347121124471211254712112647121127471211284
7121131471211324712113347121134471211354712113647121137471211384
7121141471211424712114347121144471211454712114647121147471211484
7121151471211524712115347121154471211554712115647121157471211584
7121161471211624712116347121164471211654712116647121167471211684
111196281366451536621706
12345678
Magnetic System
Chain reference879M K325880M K325880M K330881M K325881M K330
111
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
28
40
54 18
1 TRACK
68
44
100
5527
13.5
MULTI TRACK
W (mm)
48 68
50 85
44
2763
236
54315428
100
85
IN & OUTAVAILABLE ALSO125 mm - 50 mm - without
Curva Larghezza Base = 100 mm; Passo = 85 mm / Curve Basic Width = 100 mm; Pitch = 85 mm / Kurve Basisbreite = 100 mm; Teilung = 85 mm
Part Article-Nr. Tracks W702702702702702702702702
7021661470216624702166347021664470216654702166647021667470216684
12345678
100185270355440525610695
Rm=750
Chain reference879M K325880M K325880M K330881M K325881M K330
Magnetic System
56 Product Catalog www.movexii.com
880-881 M8 Series
100
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 57www.movexii.com
880-881M42 Series
75
M8
3525
10
10
33.5
48
54 23.5
1 TRACK
68
44
111
6327
13.5
MULTI TRACK
W (mm)
48 68
55.5 85
44
2763
236
54315433.5
100
85
IN & OUTAVAILABLE ALSO125 mm - 50 mm - without
Curva Larghezza Base = 111 mm; Passo = 85 mm / Curve Basic Width = 111 mm; Pitch = 85 mm / Kurve Basisbreite = 111 mm; Teilung = 85 mm
Part Article-Nr. Tracks W713713713713713713713713
7131661471316624713166347131664471316654713166647131667471316684
12345678
111196281366451536621706
Rm=750
Chain reference879M K325880M K325880M K330881M K325881M K330
Magnetic System
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
111
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
33
40
54 23
1 TRACK
68
44
110
5527
13.5
MULTI TRACK
W (mm)
40 68
55 90
44
2755
54365433
100
90
IN & OUTAVAILABLE ALSO125 mm - 50 mm - without
Curva Larghezza Base = 110 mm; Passo = 90 mm / Curve Basic Width = 110 mm; Pitch = 90 mm / Kurve Basisbreite = 110 mm; Teilung = 90 mm
Part Article-Nr. Tracks W714714714714714714714714
7141661471416624714166347141664471416654714166647141667471416684
12345678
110200290380470560650740
Rm=750
Chain reference879M K325880M K325880M K330881M K325881M K330
Magnetic System
58 Product Catalog www.movexii.com
880-881 M9 Series
110
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 59www.movexii.com
880-881M5C SeriesMateriale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
28
40
54 18
1 TRACK
68
44
100
5527
13.5
125
IN & OUTAVAILABLE ALSO100 mm - 50 mm - without
75
M8
3525
10
10
Curva Larghezza Base = 100 mm; Passo = 85 mm / Curve Basic Width = 100 mm; Pitch = 85 mm / Kurve Basisbreite = 100 mm; Teilung = 85 mm
Part Article-Nr. Tracks W703 70318615 1 100
Rm=860
Chain reference879M K325880M K325880M K330881M K325881M K330
Magnetic System
100
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
120
75
M8
3525
10
10
42.5
48
54 31.5
1 TRACK
68
44
129
6327
13.5
MULTI TRACK
W (mm)
48 68
64.5 120
44
2763
236
54665442.5
125
IN & OUTAVAILABLE ALSO100 mm - 50 mm - without
Curva Larghezza Base = 129 mm; Passo = 120 mm / Curve Basic Width = 129 mm; Pitch = 120 mm / Kurve Basisbreite = 129 mm; Teilung = 120 mm
Part Article-Nr. Tracks W715715715715715
7151161571511625715116357151164571511655
12345
129249369489609
Rm=500
Chain reference879M K450880M K450881M K450
Magnetic System
60 Product Catalog www.movexii.com
880-881 K450 M21A Series
129
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 61www.movexii.com
880-881 K450M22A SeriesMateriale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
120
75
M8
3525
10
10
42.5
48
54 32.5
1 TRACK
68
44
129
6327
13.5
MULTI TRACK
W (mm)
64.5 120
44
2763
236
54665442.5
48 68
125
IN & OUTAVAILABLE ALSO100 mm - 50 mm - without
Curva Larghezza Base = 129 mm; Passo = 120 mm / Curve Basic Width = 129 mm; Pitch = 120 mm / Kurve Basisbreite = 129 mm; Teilung = 120 mm
Part Article-Nr. Tracks W704704704704704
7041361570413625704136357041364570413655
12345
129249369489609
Rm=610
Chain reference879M K450880M K450881M K450
Magnetic System
129
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
48
68
214
44
2763
13.5
251046025
IN & OUTAVAILABLE ALSO100 mm - 50 mm - without 12
5
Curva Larghezza Base = 214 mm / Curve Basic Width = 214 mm / Kurve Basisbreite = 214 mm
Part Article-Nr. Tracks W716 71613615 1 214
Rm=610
Chain reference880M K750881M K750
Magnetic System
62 Product Catalog www.movexii.com
880-881 K750 M61 Series
214214
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 63www.movexii.com
880-881 K750M62 Series Rm=750M66 Series Rm=860M65 Series Rm=1000Materiale: Material: Materialien:
Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
10
10
40
68
214
44
2755
13.5
251046025
IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
Curva Larghezza Base = 214 mm / Curve Basic Width = 214 mm / Kurve Basisbreite = 214 mm
Part Article-Nr. Tracks W Rm707707707
707166107071861070719610
111
214214214
7508601000
Chain reference880M K750881M K750
Magnetic System
Rm214
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
100
17
200
3263
60
105 254525
68
481 TRACK
MULTI TRACK
195100
60
119 11945314525
W (mm)
17
68
48
3263
623
352510
M8
75 10
IN & OUTAVAILABLE ALSO125 mm - 100 mm - without
Curva Larghezza Base = 200 mm / Curve Basic Width = 200 mm / Kurve Basisbreite = 200 mm
Part Article-Nr. Tracks W717717717717
71713614717136247171363471713644
1234
200395590785
Rm=610
Chain reference882M K750
8857M K750
Magnetic System
64 Product Catalog www.movexii.com
882-8857 K750 M81 Series
200
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 65www.movexii.com
882-8857 K750M85 SeriesMateriale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
100
17
200
3255
60
105 254525
68
40
1 TRACK
MULTI TRACK
195100
60
119 11945314525
W (mm)
17
68
48
32636
23
352510
M8
75 10
IN & OUTAVAILABLE ALSO125 mm - 100 mm - without
Curva Larghezza Base = 200 mm / Curve Basic Width = 200 mm / Kurve Basisbreite = 200 mm
Part Article-Nr. Tracks W718718718
718166147181662471816634
123
200395590
Rm=750
Chain reference882M K7508857M K750
Magnetic System
200
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
21460
75
M8
352510
10
40 68
3255
17
251125225
IN & OUTAVAILABLE ALSO125 mm100 mm50 mm
3263
17
200107
60
236
48 68 1175225 31 11752
W (mm)
1 TRACK
MULTI TRACK
Curva Larghezza Base = 214 mm; Passo = 200 mm / Curve Basic Width = 214 mm; Pitch = 200 mm / Kurve Basisbreite = 214 mm; Teilung = 200 mm
Part Article-Nr. Tracks W708708708
708186107081862070818630
123
214410606
Rm=860
Chain reference882M K7508857M K750
Magnetic System
66 Product Catalog www.movexii.com
882-8857 K750 M86 Series
214
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 67www.movexii.com
882-8857 K750M80 SeriesMateriale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
100
17
200
3255
60
105 254525
68
40
1 TRACK
MULTI TRACK
195100
60
119 11945314525
W (mm)
176
8
48
32636
23
352510
M8
75 10
IN & OUTAVAILABLE ALSO125 mm - 100 mm - without
Curva Larghezza Base = 200 mm / Curve Basic Width = 200 mm / Kurve Basisbreite = 200 mm
Part Article-Nr. Tracks W719719719
719196147191962471919634
123
200395590
Rm=1000
Chain reference882M K750
8857M K750
Magnetic System
200
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
75
M8
3525
1010
48 68
270
60
3263
17
251408025
IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
Curva Larghezza Base = 270 mm / Curve Basic Width = 270 mm / Kurve Basisbreite = 270 mm
Part Article-Nr. Tracks W709 70918610 1 270
Rm=860Chain reference
882M K1000
Magnetic System
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
68 Product Catalog www.movexii.com
882-8857 K1000 M93 Series
270
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 69www.movexii.com
882-8857 K1200M97 SeriesMateriale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
75
M8
3525
1010
48 68
320
60
3263
17
2516510525
IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
Curva Larghezza Base = 320 mm / Curve Basic Width = 320 mm / Kurve Basisbreite = 320 mm
Part Article-Nr. Tracks W710 71018610 1 320
Rm=860 Chain reference882M K1200
Magnetic System
320
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
70 Product Catalog www.movexii.com
LBP 882 K750 MP861 Series
17
214
3263
60
6579
50.5
822
IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
Curva Larghezza Base = 214 mm / Curve Basic Width = 214 mm / Kurve Basisbreite = 214 mm
Part Article-Nr. Tracks W781 78118610 1 214
Rm=860
Chain referenceLBP 882M K750
Magnetic System
352510
M8
75 10
214
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 71www.movexii.com
LBP 882 K1000MP91 Series
60
17
65117
290
3263
50.5
228
IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
Rm=860
Curva Larghezza Base = 290 mm / Curve Basic Width = 290 mm / Kurve Basisbreite = 290 mm
Part Article-Nr. Tracks W782 78218610 1 290
Chain referenceLBP 882M K1000
Magnetic System
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
352510
M8
75 10
290
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
72 Product Catalog www.movexii.com
LBP 882 K1200 MP96 Series
17
3263
60
142 65
340
228
50.5
IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
Curva Larghezza Base = 340 mm / Curve Basic Width = 340 mm / Kurve Basisbreite = 340 mm
Part Article-Nr. Tracks W783 78318610 1 340
Rm=860
Chain referenceLBP 882M K1200
Magnetic System
352510
M8
75 10
340
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 73www.movexii.com
250M-260MMB7 Series
MULTI TRACK
W (mm)
53 116
50 85
44
2763
2411
54315428
28
45
54 18
1 TRACK
116
44
100
5527
13.5
85IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
75
M8
3525
10
10
Curva Larghezza Base = 100 mm; Passo = 85 mm / Curve Basic Width = 100 mm; Pitch = 85 mm / Kurve Basisbreite = 100 mm; Teilung = 85 mm
Part Article-Nr. Tracks W705705705705705705705705
7051161070511620705116307051164070511650705116607051167070511680
12345678
100185270355440525610695
Rm=500
Chain reference250M K330260M K330
Magnetic System
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
100
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
74 Product Catalog www.movexii.com
251M MC7 Series
MULTI TRACK
W (mm)
55 155
50 85
44
2763
2515
54315428
28
40
54 18
1 TRACK
155
44
100
5527
13.5
IN & OUTAVAILABLE ALSO125 mm - 100 mm - 50 mm
75
M8
3525
10
10
85
Curva Larghezza Base = 100 mm; Passo = 85 mm / Curve Basic Width = 100 mm; Pitch = 85 mm / Kurve Basisbreite = 100 mm; Teilung = 85 mm
Part Article-Nr. Tracks W706706706706706706706706
7061161070611620706116307061164070611650706116607061167070611680
12345678
100185270355440525610695
Rm=500
Chain reference251M K330
Magnetic System
100
Upper part available, on request,
also in
and for abrasive applications.
standard codeson table
add “B” for add “C” for abrasiveapplications
Product Catalog 75www.movexii.com
880-881 TABCurve Rm=500Curves Rm=500Kurven Rm=500
5050
25
W (mm)
Pitch.
18
9.5
45
70
Curva 880-881 TAB K325-K450-K750 / Curve 880-881 TAB K325-K450-K750 / Kurve 880-881 TAB K325-K450-K750
K325
Part Article-Nr. Tracks W Rm Pitch
720720720720720720
720216127202162272021632720216427202165272021662
123456
100185270355440525
500 85
K450721721721721721721
721236127212362272123632721236427212365272123662
123456
130250370490610720
610 120
K750722722722722
72223612722236227222363272223642
1234
200395590785
610 195
Rm
TAB System
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
Materiale: Material: Materialien:Polietilene UHMW-PE Polyethylene UHMW-PE Polyäthylen UHMW-PE
76 Product Catalog www.movexii.com
Curve Rm=610Curves Rm=610Kurven Rm=610882 TAB
50
50
30
W (mm)
Pitch.
159
58
90
Curva 882 TAB K750-K1000-K1200 / Curve 882 TAB K750-K1000-K1200 / Kurve 882 TAB K750-K1000-K1200
Rm
K750
Part Article-Nr. Tracks W Rm Pitch
723723723723
72323612723236227232363272323642
1234
200395590785
610 195
K1000724724724724
72423612724236227242363272423642
1234
270530790
1050
610 230
K1200725725725725
72523612725236227252363272523642
1234
320630940
1250
610 310
TAB System
ww
w.m
ove
xii.co
m
Movex S.r.l. Industrial Innovations Via Tasso (angolo Via Noli Marenzi)24060 Telgate (Bergamo) - ItalyPhone +39.035.8359711Fax +39.035.4420873
Movex GmbH Industrial Innovations Alfred-Nobel-Strasse, 468519 Viernheim - GermanyPhone +49.(0)6204.9375-0Fax +49.(0)6204.9375-55
Movex Industrial Innovations UK Ltd.Unit 7, Dene Valley Business CentreKineton CV35 0JD, Warwickshire - UKPhone +44.1926.642933
Movex France - Sales OfficePhone +33.06.06.81.99.76Fax +33.09.70.62.50.98
Movex Nederland - Sales OfficePhone +31.(0)630.99.48.50
Movex Singapore - Sales OfficePhone +65.9815.0482
Recommended