View
219
Download
1
Category
Preview:
Citation preview
Tata Tulis danKomunikasi Ilmiah
Desain Sampel
Dr. Eko Pujiyanto , S.Si., M.T.
Materi1. Sensus dan survei sampel
2. Langkah-langkah dalam desain sampling,
3. Kriteria memilih prosedur sampling,
4. Karakteristik desain sampel yang baik, 4. Karakteristik desain sampel yang baik,
5. Tipe desain sampel
6. Lampiran : Menentukan jumlah sampel
Jurusan Teknik Industri - Universitas Sebelas Maret
Sensus dan survei sampel
� Semua objek riset berada di alam atau populasi
� Sensus adalah enumerasi semua data dalam populasi.
� Survei sampel adalah memilih secara selektif data yang terdapat dalam populasi
Census
Jurusan Teknik Industri - Universitas Sebelas Maret
Populasi dan sampel
Population of Interest
N ~ ( μ , σ )
Sample
Population Sample
Parameter Statistic
N ~ ( μ , σ )
sx ,
Jurusan Teknik Industri - Universitas Sebelas Maret
Steps In Sample Design
1. Type of universe (population)
2. Sampling unit
3. Sampling frame
4. Size of sample4. Size of sample
5. Parameters of interest
6. Budgetary constraint
7. Sampling procedure
Jurusan Teknik Industri - Universitas Sebelas Maret
Steps In Sample Design
Jurusan Teknik Industri - Universitas Sebelas Maret
Criteria Of Selecting
A Sampling Procedure
� Researcher must keep in view the two
causes of incorrect inferences :
� Systematic bias
� Sampling error
A systematic bias �results from errors � A systematic bias �results from errors
in the sampling procedures, and it
cannot be reduced or eliminated by
increasing the sample size.
Jurusan Teknik Industri - Universitas Sebelas Maret
Criteria Of Selecting
A Sampling Procedure
Systematic bias is the result of one or
more of the following factors :
1. Inappropriate sampling frame
2. Defective measuring device
3. Non-respondents
4. Indeterminancy principle
5. Natural bias in the reporting of data
Jurusan Teknik Industri - Universitas Sebelas Maret
Criteria Of Selecting
A Sampling Procedure
1. Sampling errors are the random
variations in the sample estimates
around the true population
parameters.
2. Sampling error decreases with the 2. Sampling error decreases with the
increase in the size of the sample.
3. Sampling error can be measured for
a given sample design and size.
Jurusan Teknik Industri - Universitas Sebelas Maret
Characteristics Of
A Good Sample Design1. Sample design must result in a truly
representative sample.2. Sample design must be such which results
in a small sampling error.3. Sample design must be viable in the context
of funds available for the research study.Sample design must be such so that 4. Sample design must be such so that systematic bias can be controlled in a better way.
5. Sample should be such that the results of the sample study can be applied, in general, for the universe with a reasonable level of confidence.
Jurusan Teknik Industri - Universitas Sebelas Maret
Types of Sample Design
Jurusan Teknik Industri - Universitas Sebelas Maret
Non-probability sampling
� Sampling procedure which does not afford any basis for estimating the probability that each item in the population has of being included in the sample.
� Items for the sample are selected deliberately by the researcher.researcher.
� Types non-probability sampling
1. Convenience
2. Judgment
3. Quota
4. Snowball
Jurusan Teknik Industri - Universitas Sebelas Maret
Non-probability sampling1. Convenience sampling
� Also called haphazard or accidental sampling
� The sampling procedure of obtaining the people or units that are most conveniently available
2. Judgment Sampling2. Judgment Sampling
� Also called purposive sampling
� An experienced individual selects the sample based on his or her judgment about some appropriate characteristics required of the sample member
Jurusan Teknik Industri - Universitas Sebelas Maret
Non-probability sampling3. Quota sampling
� Ensures that the various subgroups in a population are represented on pertinent sample characteristics
� To the exact extent that the investigators desire
� It should not be confused with stratified sampling.
Snowball Sampling4. Snowball Sampling� A variety of procedures
� Initial respondents are selected by probability methods
� Additional respondents are obtained from information provided by the initial respondents
Jurusan Teknik Industri - Universitas Sebelas Maret
Probability sampling� Also known as ‘random sampling’ or
‘chance sampling’.
� Every item of the universe has an equal
chance of inclusion in the sample.
� Ensures the law of Statistical Regularity � Ensures the law of Statistical Regularity
which states that if on an average the
sample chosen is a random one, the
sample will have the same composition
and characteristics as the universe
Jurusan Teknik Industri - Universitas Sebelas Maret
Types probability sampling1. Simple Random Sampling
2. Systematic Sampling
3. Stratified Sampling
4. Cluster Sampling4. Cluster Sampling
5. Area sampling
6. Multistage Sampling
7. Sampling with probability proportional to size
8. Sequential sampling
Jurusan Teknik Industri - Universitas Sebelas Maret
Simple Random Sampling� A sampling procedure that ensures that each
element in the population will have an equal chance of being included in the sample.
� Various statisticians like Tippett, Yates, Fisher have prepared tables of random numbers which can be prepared tables of random numbers which can be used for selecting a random sample.
Jurusan Teknik Industri - Universitas Sebelas Maret
Systematic Sampling� To select every i-th item on a list
� Only the first unit is selected randomly and the remaining units of the sample are selected at fixed intervals.
It is an easier and less costlier method of � It is an easier and less costlier method of sampling and can be conveniently used even in case of large populations.
Jurusan Teknik Industri - Universitas Sebelas Maret
Stratified sampling
� Generally applied in order to obtain a representative sample
� Subsamples are drawn within different strata
� Each stratum is more or less equal on some characteristiccharacteristic
� The results in more reliable and detailed information.
Jurusan Teknik Industri - Universitas Sebelas Maret
Stratified sampling
Three questions are highly relevant in
the context of stratified sampling
1. How to form strata?
2. How should items be selected from each
stratum?stratum?
3. How many items be selected from each
stratum or how to allocate the sample size
of each stratum?
Jurusan Teknik Industri - Universitas Sebelas Maret
Stratified sampling
1. How to form strata?
Various strata be formed in such a way as to ensure elements being most homogeneous within each stratum and most heterogeneous between the different strata.the different strata.
2. How should items be selected from each stratum?
Systematic sampling can be used if it is considered more appropriate in certain situations
Jurusan Teknik Industri - Universitas Sebelas Maret
Stratified sampling
3. How many items be selected from each stratum
� Proportional allocation under which the sizes of the samples from the different strata are kept proportional to the sizes of the strata.proportional to the sizes of the strata.
� To illustrate it, let us suppose that we want a sample of size n= 30 to be drawn from a population of size N= 8000 which is divided into three strata of size N1= 4000, N2= 2400 and N3= 1600.
Jurusan Teknik Industri - Universitas Sebelas Maret
Stratified sampling
3. How many items be selected from each stratum
Jurusan Teknik Industri - Universitas Sebelas Maret
Stratified sampling
3. How many items be selected from each stratum
� In cases where strata differ not only in size but also in variability
Jurusan Teknik Industri - Universitas Sebelas Maret
Stratified sampling
Jurusan Teknik Industri - Universitas Sebelas Maret
Cluster sampling
� A sample can be taken is to divide the area into a number of smaller non-overlapping areas and then to randomly select a number of these smaller areas (clusters), with the ultimate sample consisting of all (or samples of) units in these small consisting of all (or samples of) units in these small areas or clusters.
� The purpose of cluster sampling is to sample economically while retaining the characteristics of a probability sample.
Jurusan Teknik Industri - Universitas Sebelas Maret
Cluster sampling
� Suppose we want to estimate the proportion of machine-parts in an inventory which are defective.
� Also assume that there are 20000 machine parts in the inventory at a given point of time, stored in 400 cases of 50 each. 400 cases of 50 each.
� Now using a cluster sampling, we would consider the 400 cases as clusters and randomly select ‘n’ cases and examine all the machine-parts in each randomly selected case.
Jurusan Teknik Industri - Universitas Sebelas Maret
Area sampling
� If clusters happen to be some geographic subdivisions, in that case cluster sampling is better known as area sampling
Jurusan Teknik Industri - Universitas Sebelas Maret
Multistage sampling
� Further development of the principle of cluster sampling.
� Suppose we want to investigate the working efficiency of nationalised banks in India and we want to take a sample of few banks for this purpose. sample of few banks for this purpose.
� The first stage is to select large primary sampling unit such as states in a country.
� Then we may select certain districts and interview all banks in the chosen districts.
� This would represent a two-stage sampling design with the ultimate sampling units being clusters of districts.
Jurusan Teknik Industri - Universitas Sebelas Maret
Sampling with probability proportional to size
� In case the cluster sampling units do not have the same number or approximately the same number of elements.
Jurusan Teknik Industri - Universitas Sebelas Maret
Sampling with probability proportional to size
Jurusan Teknik Industri - Universitas Sebelas Maret
Sequential Sampling
� This sampling design is some what complex sample design.
� The ultimate size of the sample under this technique is not fixed in advance, but is determined according to mathematical decision rules on the basis of to mathematical decision rules on the basis of information yielded as survey progresses.
� This is usually adopted in case of acceptance sampling plan in context of statistical quality control.
Jurusan Teknik Industri - Universitas Sebelas Maret
LampiranMenentukan ukuran sampel
Syarat
Jurusan Teknik Industri - Universitas Sebelas Maret
Lampiran
( Menentukan ukuran sampel )
Jurusan Teknik Industri - Universitas Sebelas Maret
Lampiran
( Menentukan ukuran sampel )
Jurusan Teknik Industri - Universitas Sebelas Maret
Referensi� Khotari, C.R., 2004, Research Methodology: Methods and
Techniques, New Age International (P) Ltd., Publishers. ( Chapter 4)
Jurusan Teknik Industri - Universitas Sebelas Maret
Recommended