View
220
Download
3
Category
Preview:
Citation preview
Product information
Hegewald & Peschke, Meß- und Prüftechnik GmbH Am Gründchen 1, 01683 Nossen, Germany Telephone: +49 35242 445-0, Telefax: +49 35242 445-111 E-Mail: info@Hegewald-Peschke.de http://www.Hegewald-Peschke.com Page 1 / 3
Wedge type grips 20kN – 400kN
14-096-xx0Overview wedge type grips
Page 2 / 3
Technical data:
14-096-020 14-096-050 14-096-100 14-096-250 14-096-400
Application Tensile testing of rigid flat and round materials Self-clamping system Jaw Faces are kept in closed position with a spring
Specimen material Metallic and non-metallic materials, plastics, sheet metal, rods, pro-files, ribbons
For tests according to universal
Capacity 20kN 50k 100kN 250kN 400kN
Temperature range Room temperature
Specimen dimensions Flat specimens 0 – 20mm specimen width up to 40mm; round specimens 4 – 21mm
Flat specimens 0 – 35mm, specimen width up to 60mm round specimens 5 – 35mm
Connection/ machine type R20/8-H / universal
R36/18-H / universal
R60/30-H / universal
R60/30-H / universal
M64x4-H / Inspekt
Dimensions (HxWxD) [mm] (plus lever) / design
115x145x65 browned
130x165x65 browned
210x250x95 browned
220x300x 110 browned
250x395x145 browned
Weight per clamp (without jaws) 4kg 6,5kg 28kg 48kg 86kg
Coupling system for connecting additional tools
- AS40 AS60 AS60 AS61
Included in delivery 1 pair of wedge type grips
Necessary accessories (can be ordered optionally)
Clamping jaws for flat specimens 0 - 10mm, art.-nr.: 14-096-510 Clamping jaws for flat specimens 8 - 15mm, art.-nr.: 14-096-520 Clamping jaws for flat specimens 12 - 20mm, art.-nr.: 14-096-530 Clamping jaws for round spec. 4 - 10mm, art.-nr.: 14-096-610 Clamping jaws for round spec. 8 - 14mm, art.-nr.: 14-096-620 Clamping jaws for round spec. 12 - 17mm, art.-nr.: 14-096-630 Clamping jaws for round spec. 17 - 21mm, Art.-Nr.: 14-096-640
Clamping jaws for flat specimens 0 - 15mm, art.-nr.: 14-096-715 Clamping jaws for flat specimens 14 - 26mm, art.-nr.: 14-096-725 Clamping jaws for flat specimens 23 - 35mm, art.-nr.: 14-096-735 Clamping jaws for round specimens 5 - 15mm, art.-nr.: 14-096-815 Clamping jaws for round specimens 15 - 23mm, art.-nr.: 14-096-825 Clamping jaws for round specimens 23 - 30mm, art.-nr.: 14-096-835 Clamping jaws for round specimens 30 - 35mm, Art.-Nr.: 14-096-845
14-096-xx0Overview wedge type grips
Page 3 / 3
Your contact:
Configuration:
Wedge type grip with adapted load cell
Wedge type grip with adapted specimen holder
Complete system for tensile tests on flat and round specimens
Complete system for tensile tests on thread, shoul-der or screw specimens Further application:
Coupling system AS60 with outside thread M64x4, 250kN 12-048-001
Specimen holder 600kN with sight, thread or shoulder speci-mens, Connection M64x4 14-074-000
Wedge teype grip 100kN 14-096-100
Complete system with longer clamp-ing jaws for the grip-ping of wires
Complete system with adapted com-pression plates for the testing of springs
Recommended