View
539
Download
0
Category
Preview:
Citation preview
Propuesta de Proyecto de Investigación:
Fabricación y Determinación de la Conductividad Térmica Efectiva de un Compuesto de Aluminio y Nanotubos de Carbono CNT´s y evaluar su aplicación en Disipadores de
Calor
Presentado por: Arlex Guzman (arlexrush@gmail.com) Asesorado por: Dr. Anwar Hasmy
Dr. Ernesto Medina.
Fundamentos de Nanociencias, Nanotecnología y sus Implicaciones Sociales
Enero, 2012
EL PROBLEMA
Fabricación y Determinación de la Conductividad Térmica Efectiva de un Compuesto de Aluminio y Nanotubos de Carbono (CNT´s) con la finalidad de usarlo como material para el diseño y fabricación de Disipadores e Intercambiadores de Calor.
Fabricar un Compuesto de Aluminio y Nanotubos de Carbono (CNT´s), determinar su Conductividad Térmica Efectiva y evaluar su aplicación en Disipadores de Calor.
OBJETIVO GENERAL
OBJETIVOS ESPECIFICOS
Describir Propiedades Térmicas de los CNTs en compuestos de Aluminio-CNTs (Al-CNTs). Evaluar los diferentes métodos de Síntesis de compuestos de Al-CNTs. Propuesta de Diseño y Fabricación de Compuesto CNTs-Aluminio (Síntesis). Medición y Determinación de la Conductividad Térmica Efectiva del Compuesto Al-CNTs. Caracterización del compuesto Al-CNTs. Evaluación de la aplicabilidad en disipadores de Calor.
VARIABLES DE INVESTIGACIÓN.
• Kapitza Interface Resistance.
• Alignment.
• Dispersion.
• Umklapp phonon-phonon scattering processes.
• length efficiency in CNT (< 1 μm). Para longitudes mayores reduce la
conductividad Térmica debido a curbaturas y doblados.
DEFINICIÓN DE PROYECTO
TÉCNICAS DE SINTESIS
Técnicas de Síntesis de Compuestos. Spray de Plasma
Fig. 1. Schematic showing the plasma spray formed cylinder (not to scale) and the orientation of the sample used for thermal conductivity measurement.
semi-solid powder processing
Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing. Yufeng Wu1, Gap-Yong Kim∗ Department of Mechanical Engineering, Iowa State University, Ames, IA 50011, USA
Técnicas de Síntesis de Compuestos.
Técnicas de Síntesis de Compuestos.
• Natural rubber as a mixing medium.
• Molecular-level mixing method.
• Thermal Spraying.
• Hot-pressing.
• Hot extrusion.
• Spark plasma sintering.
• Electro-less deposition.
Medición de Conductividad Térmica. Flash Diffusivity.
k = α x ῥ x CP
α: Thermal diffusivity, was measured using a Holometrix Micromet-300 Thermal Diffusivity Instrument (Metrisa Inc., Bedford, MA) by the pulse method for several temperatures between 50 °C and 300 °C
ῥ: bulk density, of the composite which was measured by the Archimedes method and found to be 2.44 g cm3 and 2.35 g cm3 for Al–Si and Al-10CNT coatings respectively.
CP: specific heat capacity, were taken as the mole fraction weighted average (Neumann– Kopp additive rule) and the values for the CP for Al–Si and CNT (Graphite) were obtained from the thermodynamic database FACTSAGE™
Técnicas de Medición
Medición de Conductividad Térmica. Modelos Teóricos y Computacionales
Técnicas de Medición
Caracterización Compuesto de Al-10%w.CNTs, fabricado por Spray de Plasma
Optical micrographs showing low magnification microstructures of (a) Al–Si and (b) Al–10CNT coatings. (c) High magnification SEM image of fracture surface of Al–10CNT coating showing good CNT distribution in the matrix region, and (d) SEM image showing a partially infiltrated porous CNT cluster in the Al–10CNT coating.
Técnicas de Medición
RESULTADOS DE APLICACIÓN DEL OOF.
Compuesto de Al-10%w.CNTs, fabricado por Spray de Plasma.
Fig. 5. (a) Binary image of the distribution of CNTs in the inter-splat region obtained from the SEM image of fracture surface (Fig. 3c), (b) the finite element mesh of the binary image with boundary conditions applied for analysis, and (c) the heat flux distribution variation along the microstructure. Note the high heat flux along the CNTs owing to their high thermal conductivity.
ANTECEDENTES ANALISIS DE ARTICULO
REFERENCIAS [1] S. Berber, Y-K. Kwon, D. Tomanek, Phys. Rev. Lett. 84 (2000) 4613–4616. [2] P. Kim, L. Shi, A. Majumdar, P.L. McEuen, Phys. B 323L (2002) 67–70. [3] J.P. Small, L. Shi, P. Kim, Solid State Commun. 127 (2003) 181–186. [4] E. Pop, D. Mann, J. Cao, Q. Wang, K. Goodson, H. Dai, Phys. Rev. Lett. 95 (2005) 155505. [5] E. Pop, D. Mann, Q. Wang, K. Goodson, H. Dai, Nano Lett. 6 (2006) 96–100. [6] M.E. Itkis, F. Borondics, A. Yu, R.C. Haddon, Nano Lett. 7 (2007) 900–904. [7] J. Hone, M.C. Llaguno, N.M. Nemes, A.T. Johnson, J.E. Fisher, D.A. Walters, M.J. Casavant, J. Schmidt, R.E. Smalley, Appl. Phys. Lett. 7 (2000) 666–668. [8] D.J. Yang, Q. Zhang, G. Chen, S.F. Yoon, J. Ahn, S.G. Wang, Q. Zhou, Q. Wang, J.Q. Li, Phys. Rev. B 66 (2002) 165440. [9] Q-M. Gong, Z. Li, X-D. Bai, D. Li, Y. Zhao, J. Liang, Mater. Sci. Eng. A 384 (2004) 209–214. [10] H.L. Zhang, J-F. Li, K.F. Yao, L.D. Chen, J. Appl. Phys. 97 (2005) 114310. [11] H.L. Zhang, J-F. Li, B-P. Zhang, K-F. Yao, W-S. Lie, H. Wang, Phys. Rev. B 75 (2007) 205407. [12] I. Ivanov, A. Puretzky, G. Eres, H. Wang, Z. Pen, H. Cui, R. Jin, J. Howe, D.B. Geohegan, Appl. Phys. Lett. 89 (2006) 223110. [13] C. Qin, X. Shi, S.Q. Bai, L.D. Chen, L.J. Wang, Mater. Sci. Eng. A420 (2006) 208–211. [14] D. Wang, P. Song, C. Liu, W. Wu, S. Fan, Nanotechnology 19 (2008) 075609. 15] K. Yang, J. He, Z. Su, J.B. Reppert, M.J. Skove, T.M. Tritt, A.M. Rao, Carbon 48 (2010) 756–762.
[16] S.U.S. Choi, Z.G. Zhang, W. Yu, F.E. Lockwood, E.A. Grulke, Appl. Phys. Lett. 79 (2001) 2252–2254. [17] M-S. Liu, M-C. Lin, I-T. Huang, C-C. Wang, Int. Commun. Heat Mass Trans. 32 (2005) 1202–1210. [18] S.T. Huxtable, D.G. Cahill, S. Shenogin, L. Xue, R. Ozisik, P. Barone, M. Usrey, M.S. Strano, G. Siddons, M. Shim, P. Keblinski, Nat. Mater. 2 (2003) 731–734. [19] P.C. Song, C.H. Liu, S.S. Fan, Appl. Phys. Lett. 88 (2006) 153111. [20] S. Wang, R. Liang, B. Wang, C. Zhang, Carbon 47 (2009) 53–57. [21] X.L. Shi, H. Yang, G.Q. Shao, X.L. Duan, L. Yan, Z. Xiong, P. Sun, Mater. Sci. Eng. A 457 (2007) 18–23. [22] Q. Ngo, B.A. Cruden, A.M. Cassell, M.D. Walker, Q. Ye, J.E. Koehne, M. Meyyappan, J. Li, C.Y. Yang, Mater. Res. Soc. Symp. Proc. 812 (2004) F3.18. [23] Y. Chai, K. Zhang, M. Zhang, P.C.H. Chan, M.M.F. Yuen, Electron. Compon. Tech. Conf. Proc. (2007) 1224–1229. [24] C. Kim, B. Lim, B. Kim, U. Shim, S. Oh, B. Sung, J. Choi, J. Kia, S. Baik, Synthetic Metals 159 (2009) 424–429. [25] K. Chu, Q. Wu, C. Jia, X. Liang, J. Nie, W. Tian, G. Gai, H. Guo, Compos. Sci. Technol. 70 (2010) 298–304. [26] Y. Tang, H. Cong, R. Zhong, H-M. Cheng, Carbon 42 (2004) 3251–3272. [27] Y. Yoshida, J. Appl. Phys. 87 (2000) 3338–3341. [28] P.K. Schelling, P. Keblinski, Phys. Rev. B 68 (2003) 035425. [29] C.F. Deng, Y.X. Ma, P. Zhang, X.X. Zhang, D.Z. Wang, Mater. Lett. 62 (2008) 2301–2303.
[30] S.A. Langer, E.R. Fuller Jr., W.C. Carter, Comput. Sci. Eng. 3 (2001) 15–23. [31] A.C.E. Reid, S.A. Langer, R.C. Lua, V.R. Coffman, S-I. Haan, R.E. Garcýa, Comput. Mater. Sci. 43 (2008) 989–999. [32] Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura, H. Herman, Acta Mater. 51 (2003) 5319–5334. [33] A.D. Jadhav, N.P. Padture, E.H. Jordan, M. Gell, P. Miranzo, E.R. Fuller Jr., Acta Mater. 54 (2006) 3343–3349. [34] T. Ziegler, A. Neubrand, S. Roy, A. Wanner, R. Piat, Compos. Sci. Technol. 69 (2009) 620–626. [35] O. Sarikaya, E. Celik, Mater. Des. 23 (2002) 645–650. [36] F. Azarmi, T. Coyle, J. Mostaghimi, Surf. Coat. Technol. 203 (2009) 1045–1054. [37] Y. Dong, D. Bhattacharyya, P.J. Hunter, Comput. Sci. Technol. 68 (2008) 2864– 2875. [38] S.R. Bakshi, K. Balani, A. Agarwal, J. Am. Ceram. Soc. 91 (2008) 942–947. [39] S.R.Bakshi, V. Singh, S. Seal, A.Agarwal,Surf.Coat. Technol.203(2009) 1544–1554. [40] C.W. Bale, P. Chartrand, S.A. Degterov, G. Eriksson, K. Hack, R.B. Mahfoud, J. Melanqon, A.D. Pelton, S. Petersen, Calphad 26 (2002) 189–228. [41] R. McPherson, Thin Solid Films 112 (1984) 89–95. [42] K. Balani, S.R. Bakshi, Y. Chen, T. Laha, A. Agarwal, J. Nanosci. Nanotechnol. 7 (2007) 3553–3562. [43] S.R. Bakshi, PhD Dissertation. Florida International University 2009. <http:// digitalcommons.fiu.edu/etd/97>. [44] Q. Zhang, G. Wu, D. Sun, G. Chen, L. Jiang, J. Mater. Sci. 39 (2004) 303–305. [45] R. Sivakumar, S. Guo, T. Nishimura, Y. Kagawa, Scripta Mater. 56 (2007) 265–268.
[46] C-W. Nan, Z. Shi, Y. Lin, Chem. Phys. Lett. 375 (2003) 666–669. [47] C-W. Nan, G. Liu, Y. Lin, M. Li, Appl. Phys. Lett. 85 (2004) 3549–3551. [48] Q.Z. Xue, Phys. B 368 (2005) 302–307. [49] K. Landry, S. Kalogeropoulou, N. Eustathopoulos, Mater. Sci. Eng. A 254 (1998) 99–111. [50] T. Laha, S. Kuchibhatla, S. Seal, W. Li, A. Agarwal, Acta Mater. 55 (2007) 1059–
1066. [51] K. Landry, C. Rado, R. Voitovich, N. Eustathopoulos, Acta Mater. 45 (1997) 3079–3085. [52] S.R. Bakshi, A.K. Keshri, V. Singh, S. Seal, A. Agarwal, J. Alloys Compd. 481 (2009) 207–213. [53] F. Cernuschi, S. Ahmaniemi, P. Vuoristo, T. Mantyla, J. Eur. Ceram. Soc. 24 (2004) 2657–2667.
[54] A. Bjorneklett, L. Haukeland, J. Wigren, H. Kristiansen, J. Mater. Sci. 29 (1994) 4043–4050. [55] G. Ondracek, B. Schulz, J. Nucl. Mater. 46 (1973) 253–258. [56] R. Landauer, J. Appl. Phys. 23 (1952) 779–784. [57] N. Shenogina, S. Shenogin, L. Xue, P. Keblinski, Appl. Phys. Lett. 87 (2005) 133106.
ANTECEDENTES ANALISIS DE ARTICULO
REFERENCIAS
Recommended