1/4

How to Rekey a Schlage Lock without the Original Keydvslocksmith.com/2021/07/14/how-to-rekey-a-schlage-lock-without-the-original-key

It is a difficult task to rekey a schlage lock without the original key. But it is something

that a Lockout service in Forest Park can do. Yet, it may be costly because they will need

to make a house call without a key. New Schlage locks include a reset key. It allows you to

rekey the lock without using any of the existing keys. Confirm that you don’t have this

blue “Secure Key” technology before you try anything else. If you discover the resetting

key from the Schlage Rekey lock service in Forest Park, buy a new set. The set includes a

new reset key. Then follow the instructions for that Schlage model.

In this article, we’ll look at how to rekey a Schlage lock without the original key. We’ll also

check to rekey vs. purchasing a new lock for various locking methods.

Rekeying Kit

Rekeying products are available for most Lockout services in Forest Park. Unfortunately,

most of them are irreplaceable. So, you need to get a locking kit in your home for every

brand. Each kit has six locks to rekey. If you need to do more, you can get more pins. The

kit works on locks of the entry and deadbolt. It has two keys and all appliances other than

a screwdriver. But keep your keys up to date. To remove the cylinder, you will need them.

2/4

Rekeying a lock

A lock cylinder is more than one way out. For example, a Rekey lock service in Forest Park

may choose to open the lock or shake the lock to release it. First, the locksmith must bring

the lock to its “unlock” position. Next, it is to reclaim the lock cylinder. Finally, it is so that

the locksmith can remove the cylinder.

Kwikset Smart Key

If you have access from the door without damaging the lock, you can take the cylinder.

Then use a clever Kwikset key reboot to enter your new key into the locks. Kwikset

intelligent keys are available at Rekey lock service in Forest Park.

Rekeying a Schlage lock:

The situation can be a bit difficult when it comes to Schlage lever locks. The Lockout

service in Forest Park locksmith would select this lock. Then unscrew the lever and pull

the cylinder to restore it. Schlage but, be challenging to decide. Thus, it is sometimes

easier to either change the lock or drill the cylinder and change it with a new cylinder. The

cost of the substitute cylinder is around $10.

Costs of rekeying a lock

As the key pins in the locks are cheap, rekeying is always cheaper than changing your

locks. It is because when you rekey your locks, you will only get paid for your labor. But, if

you change your locks, you pay both for labor and parts. Lockout service in Forest Park

and Rekey lock service in Forest Park offers to rekey a lock at low prices.

When to rekey a lock

If you lose your set of keys, it will harm your doors because anyone with the keys can get

entrance. If you need to solve the problem, rekeying is your best alternative. As a result,

no one will be able to get entrance to your property using the old keys. It takes more time

to change locks and is unnecessary. But, this is dependent on the sort of door lock and

handle you have installed on your door.

Rekeying a lock can also help to increase a building’s security. For example, contractors

may have duplicate keys after the construction of a home. As a result, when some buy a

house, they should ensure that they have possession of the keys. It’s also common to

change door locks when the new resident comes in for landlords and property

management.

3/4

Tips on how to Rekey a Schlage lock without the original key

Remove the knob of the door

Insert the wire tool in the buttonhole and push the button clip. Next, remove the

knob from the door. The kit includes the buttonhole.

Remove the cylinder. To remove the knob sleeve, push the cylinder out the back of

the knob assembly. Take out the cylinder.

Pull out the Retainer Ring

Use the specific retainer ring tool to remove the thin retainer ring. The kit includes

the retainer ring. To remove the retention ring from the cylinder, press the retainer

ring tool against it. Set aside the ring for later replacement.

Remove the cylinder plug.

Removing the cylinder plug from the cylinder is an essential step. The pins and

springs on the cylinder’s top keep pressure on the keyed pins. Pull out the old key

and rotate it to the left or right. Next, push the plug follower through the cylinder to

remove the plug. Keep the pressure between the plug follower. It prevents the pins

and springs from popping out.

Keep the plug close to the cylinder plug until removed so that the pins and springs

do no longer pop out of the cylinder. According to Lockout service in Forest Park,

it’s not the end of the world if the pins and springs fall out. First, make sure you

collect them all. Then, for reinserting them, follow the instructions on the attached

instruction page.

Reassemble the lock by inserting the Pins.

Remove the old pins, insert the new key. Place the new colored pins using tweezers

or small pins on the color code of the instruction sheet. Reassemble the lock after

installing the new pins.

Rekeying vs. Buying new locks

4/4

Suppose you have a custom lock fitted (such as those used on French doors) or a designer

lock. First, of course, you must rekey the lock. But if you have lost the keys to a generic

lock or two. You should go to the Rekey lock service in Forest and get a new set of locks.

Lockout service in Forest Park locksmith will be able to rekey a lock without the original

key. But please consider your options. Your budget, as well as the locking mechanisms,

locks, and handles you have, will all play a role. Choose the best solution for your scenario

by weighing the benefits of rekeying against purchasing a new lock.