立浦重工机械有限公司 Lipu Heavy Industry Co.,Ltd

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

0086-21-68798908 0086-21-68798919 Page 2 of 3

ROTARY DRYERBriefBriefBriefBrief introductionintroductionintroductionintroductionRotary dryer is suitable to dry metallic and nonmetallic mineral, clay in cement industry and coal in coal mine, etc. Rotarydryer can be widely used to dry various materials, and it is simple to be operated.

WorkingWorkingWorkingWorking principleprincipleprincipleprincipleMaterials are sent to hopper of rotary dryer by belt conveyor or bucket elevator.The barrel is installed with slope tohorizontal line. Materials enter the barrel from the higher side, and hot air enters the barrel from the lower side, materialsand hot air mix together. Materials go to the lower side by gravity when the barrel rotates. Lifters on the inner side ofbarrel lift materials up and down to make materials and hot air mix completely. So drying efficiency is improved.

立浦重工机械有限公司 Lipu Heavy Industry Co.,Ltd

____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

0086-21-68798908 0086-21-68798919 Page 3 of 3

Yunnan rotary drum dryer customer site

TECHNICAL PARAMETERSModel Shell diameter

（mm）

Shell length（mm）

Slope（°）

Rotary speed（r/min）

Weight(t)

Power（KW）

Volume（m³）

Φ0.6×8 Φ600 8000 3-5 8 5.1 6-4 2.26Φ0.8×10 Φ800 10000 3-5 7.2 6.9 6-4 5.02Φ1.0×10 Φ1000 10000 3-5 6.73 7.5 6-5.5 7.85Φ1.2×12 Φ1200 12000 3-5 5.8 13.1 6-11 13.31Φ1.5×12 Φ1500 12000 3-5 4.8 22.3 6-15 21.2Φ2.2×14 Φ2200 14000 3-5 3.2 52.8 30 53.22Φ2.4×18 Φ2400 18000 3-5 3 73.3 37 81.43Φ2.8×24 Φ2800 24000 3-5 2.59 97 75 147.8

Any change of technical parameters,there is no further notice