Contents · Contents 1. 各国钢管材质对照表 2. 各国钢管性能对照表 ... DIN 17100 DIN 2440/2441 DIN 2440/2441 A 120 - 1387 ISO-65 DIN 1626/3 DIN 1626/3 DIN 2458 DIN

Contents

1. 各国钢管材质对照表

2. 各国钢管性能对照表

3. 各国钢管外径尺寸对照表

4. 美标钢管尺寸

5. 国际标准或欧标钢管尺寸

6. 日标钢管尺寸

7. 国标钢管尺寸

8. 产品材料

9. 产品标准

Tables of Comparative Specifications………………………………………………01

Tables of Comparative Steel Specifications………………………………………02

Tables of Comparative Pipe Outside Dimensions……………………………03

Pipe Schedule (ASTM Standard)………………………………………………………04

Massed Per Unit Length (ISO or EN Standard)………………………………05

Pipe Schedule (JIS Standard)……………………………………………………………10

Pipe Schedule(GB Standard)……………………………………………………………11

Materials…………………………………………………………………………………………12

pecifications……………………………………………………………………………………15

钢管 Pipes

目录目录

http://www.jason-steel.com

JASON对照表 Comparisons

Co

mp

aris

on

Standards Equivalent Specifications

Material Standards

Manufact. Standards

Dimensional Standards ASTM API BS DIN DIV

DIN 1626/2 DIN 1626/2 DIN 2458DIN 17100 DIN 2440/2441 DIN 2440/2441 A 120 - 1387 ISO-65DIN 1626/3 DIN 1626/3 DIN 2458DIN 17100 DIN 1626/3 DIN 2458 A 53 Gr A 5L1-Gr A 3601 ERW 320

DIN 1626/3-4 DIN 1626/3-4 DIN 2458 A 53 Gr B 5L Gr B 3601 ERW 410 Euronorm 25 Fe 430 ADIN 17100 DIN 1626/3-4 DIN 2458 A 53 Gr B 5L Gr B 4360-43C Euronorm 25 Fe 430 BDIN 17100 DIN 1626/3-4 DIN 2458 A 53 Gr B 5L Gr B 4360-43C Euronorm 25 Fe 430 CDIN 17100 DIN 1626/3-4 DIN 2458 A381-Y52 5LX-X52 4360-50C Euronorm 25 Fe 510C/FG 36DIN 1629/3 DIN 1629/3 DIN 2448 A 53 Gr A 5L Gr A 3601-S 360DIN 1629/3 DIN 1629/3 DIN 2448 A 53 Gr B 5L Gr B 3601-S 410DIN 1629/3 DIN 1629/3 DIN 2448 A252 Gr 3 5LX-X52 1775-HFS23 A519-1518DIN 17175 DIN 17175 DIN 2448 A106 Gr A 5L Gr A 3602-HFS 360 BS3059 pt 2360DIN 17175 DIN 17175 DIN 2448 A106 Gr B 5L Gr B 3602-HFS 410 BS3601 S 410DIN 17175 DIN 17175 DIN 2448 A335 P1 3059-243DIN 17175 DIN 17175 DIN 2448 A335 P11-P12 3604-620 BS 3059-620DIN 17175 DIN 17175 DIN 2448 A335 P22 3604-622 - BS 3059-622/440

Vd TUV 1207 DIN 17175 DIN 2448 A335 P5 3604-625 -SEW 680 DIN 17175 DIN 2448 A333 Gr 1 -SEW 680 DIN 17175 DIN 2448 A333 Gr 6 3603-410SEW 680 DIN 17175 DIN 2448 A333 Gr 3 3603-503SEW 089 DIN 1629/4 DIN 2448 A381-Y52 AP1-5LX-X52 4360-50C Fe 510C/FG 36

A 53 A 53 ANSI-B 36.10 - 5L Gr A 3601-S 360 St 35 BS 3601 ERW 360A 53 A 53 ANSI-B 36.10 - 5L Gr B 3601-S 410 St 45 BS 3601 ERW 410A106 A 106/A530 ANSI-B 36.10 - 5L Gr A 3602 HFS 23 St 35.8A106 A 106/A530 ANSI-B 36.10 - 5L Gr B 3602 HFS 27 St 45.8A333 A333/A530 ANSI-B 36.10 - - - TT St 35A333 A333/A530 ANSI-B 36.10 - - 3603 410 TT St 41A333 A333/A530 ANSI-B 36.10 - - 3603-503 10 Ni 14A335 A335/A530 ANSI-B 36.10 - - 3059-243 15 Mo 3A335 A335/A530 ANSI-B 36.10 - - 3604-620 13 Cr Mo 44A335 A335/A530 ANSI-B 36.10 - - 3604-620 13 Cr Mo 44A335 A335/A530 ANSI-B 36.10 - - 3604-622 10 Cr Mo 910A335 A335/A530 ANSI-B 36.10 - - 3604-625 12 Cr Mo 195

BS 1387 BS 1387 BS 1387 A120 - St 33BS 3059 BS 3059 BS 3059 A106 Gr A 5L Gr A - St 35BS 3059 BS 3059 BS 3059 A 53 Gr A 5L Gr A - St 34-2BS 3059 BS 3059 BS 3059 A106 Gr A 5L Gr A - St 35.8 BS 3602 pt1 HFS 360BS 3059 BS 3059 BS 3059 A106 Gr B 5L Gr B - St 45.8 BS 3602 pt1 ERW 360BS 3059 BS 3059 BS 3059 A335 P1 - - 15 Mo 3 BS 3602 pt1 HFS 410BS 3059 BS 3059 BS 3059 A335 P11/P12 - - 13 Cr Mo 44 BS 3602 pt1 ERW 410BS 3059 BS 3059 BS 3059 A335 P22 - - 10 Cr Mo 910 BS 3602 pt2 SAW 410BS 3601 BS 3601 BS 3600 A106 Gr A 5L Gr A - St 35.8BS 3601 BS 3601 BS 3600 A 53 Gr A 5L Gr A - St 34-2BS 3601 BS 3601 BS 3600 A106 Gr A 5L Gr A - St 35.8BS 3601 BS 3601 BS 3600 A 53 Gr A 5L Gr A - St 37.2BS 3601 BS 3601 BS 3600 A106 Gr B 5L Gr B - St 45.8BS 3601 BS 3601 BS 3600 A 53 Gr B 5L Gr B - St 44.3BS 3601 BS 3601 BS 3600 A 53 Gr B 5L Gr B - St 44.3BS 3603 BS 3603 BS 3600 A333 Gr 6 - - TT St 41BS 3603 BS 3603 BS 3600 A333 Gr 3 - - 10 Ni 14BS 3604 BS 3604 BS 3600 A335 P11/P12 - - 13 Cr Mo 44BS 3604 BS 3604 BS 3600 A335-P22 - - 10 Cr Mo 910BS 3604 BS 3604 BS 3600 A335-P5 - - 12 Cr Mo 195BS 4360 BS 4360 - A 53 Gr B 5L Gr B/5LX-X42 - St 45/St 44.3 Euronorm 25 Fe 430 CBS 4360 BS 4360 - - 5LX-X52 - St 52.3 Euronorm 25 Fe 510 CBS 4360 BS 4360 - - 5LX-X52 (N) - St 52.3 Euronorm 25 Fe 510 D/Fg 36

各国钢管材质对照表 Tables of Comparative Steel Specifications

01

JASON

Co

mp

aris

on

Mechanical Properties Chemical Analysis ( Ladle)

Material Tensile Strength N/mm2

Yield Pointmin N/mm2

Elongtion % Min

C %

Si %

Mn %

P% max.

S% max.

Mo%

Cr%

Ni% Div

St. 33 290-540 185 18 - - - -

St. 34-2 335-410 205 28 max. 0.15 - - 0.05 0.05

St. 37-2 340-470 235 25 max. 0.17 - - 0.05 0.05 N max. 0.009

St. 42-2 410-490 255 20 max. 0.25 - - 0.06 0.05 N max. 0.009

St. 44-2 410-540 275 22 max. 0.21 - - 0.05 0.05

St. 44-3 410-540 275 22 max. 0.20 - - 0.04 0.04

St. 52-3 490-630 355 22 max. 0.20 max. 0.55 max. 1.60 0.04 0.04

St. 35 340-440 235 25 max. 0.18 - - 0.05 0.05

St. 45 440-540 255 21 max. 0.25 - - 0.05 0.05

St. 52 510-610 355 22 max. 0.20 max. 0.55 max. 1.50 0.05 0.05

St. 35.8 360-480 235 25 max. 0.17 0.10-0.35 0.40-0.80 0.04 0.04

St. 45.8 410-530 255 21 max. 0.21 0.10-0.35 0.40-1.20 0.04 0.04

15Mo3 450-600 270 22 0.12-0.20 0.10-0.35 0.40-0.80 0.035 0.035 0.25-0.35 -

13 Cr Mo 44 440-590 290 22 0.10-0.18 0.10-0.35 0.40-0.70 0.035 0.035 0.45-0.65 0.70-1.10

10 Cr Mo 910 450-600 280 20 0.08-0.15 max. 0.55 0.40-0.70 0.035 0.035 0.90-1.20 2.00-2.50

12 Cr Mo 19.5 410-540 176 21 max. 0.15 0.30-0.50 0.30-0.60 0.03 0.03 0.45-0.65 4.0-6.0

TT St. 35 345-445 225 25 max. 0.17 max. 0.35 min. 0.40 0.045 0.045

TT St. 41 445-540 265 21 max. 0.20 max. 0.35 min. 0.45 0.045 0.045

10 Ni 14 445-640 345 20 max. 0.12 0.10-0.35 0.30-0.60 0.035 0.035 3.20-3.80

St. E 36 500-640 345 22 max. 0.20 0.10-0.50 0.90-1.60 0.04 0.04

A 53-Gr A min. 330 205 variable max. 0.25 - max. 0.95 0.05 0.06

A 53-Gr B min. 415 240 variable max. 0.30 - max. 1.20 0.035 0.035

A 106-Gr A min. 330 205 28 max. 0.25 min. 0.10 0.27-0.93 0.048 0.058

A 106-Gr B min. 415 240 22 max. 0.30 min. 0.10 0.29-1.06 0.035 0.035

A 333 Gr 1 min. 379 207 28 max. 0.30 - 0.40-1.06 0.05 0.06

A 333 Gr 6 min. 414 241 22 max. 0.30 min. 0.10 0.29-1.06 0.048 0.058

A 333 Gr 3 min. 448 241 22 max. 0.19 0.18-0.37 0.31-0.64 0.05 0.05 3.18-3.82

A 335 Gr P1 min. 379 207 22 0.10-0.20 0.10-0.50 0.30-0.80 0.045 0.045 0.44-0.65 -

A 335 Gr P11 min. 414 207 22 max. 0.15 0.50-1.00 0.30-0.60 0.03 0.03 0.44-0.65 1.00-1.50

A 335 Gr P12 min. 414 207 22 max. 0.15 max. 0.50 0.30-0.61 0.045 0.045 0.44-0.65 0.80-1.25

A 335 Gr P22 min. 414 207 22 max. 0.15 max. 0.50 0.30-0.60 0.03 0.03 0.87-1.13 1.90-2.60

A 335 Gr P5 min. 414 207 22 max. 0.15 max. 0.50 0.30-0.60 0.03 0.03 0.45-0.65 4.00-6.00

BS 1387 325-465 - 20 - - - 0.06 0.06

BS3059 pt1-HFS 320 320-480 195 25 max. 0.16 - 0.30-0.70 0.05 0.05

BS3059 pt1-ERW 320 320-480 195 25 max. 0.19 - 0.30-0.70 0.05 0.05

BS3059 pt2 360 360-500 215 24 max. 0.17 max. 0.35 0.40-0.80 0.045 0.045

BS3059 pt2 440 440-580 245 21 0.12-0.18 0.10-0.35 0.90-1.20 0.04 0.035

BS3059 pt2 243 450-600 250 22 0.12-0.20 0.10-0.35 0.40-0.80 0.04 0.04 0.25-0.35 Al met 0.020 max

BS3059 pt2 620 460-610 180 22 0.10-0.15 0.10-0.35 0.40-0.70 0.04 0.04 0.45-0.65 0.90-1.20 Al met 0.020 max

BS3059 pt2 622-440 440-590 175 20 0.08-0.15 max. .050 0.40-0.70 0.04 0.04 0.90-1.20 2.00-2.50 Al met 0.020 max

BS3601 S320 320-440 195 25 max. 0.16 - 0.30-0.70 0.05 0.05

BS3601 ERW 320 320-440 195 25 max. 0.16 - 0.30-0.70 0.05 0.05

BS3601 S360 360-480 215 24 max. 0.17 max. 0.35 0.40-0.80 0.05 0.05

BS3601 ERW 360 360-480 215 24 max. 0.17 max. 0.35 0.40-0.80 0.05 0.05

BS3601 S410 410-530 235 22 max. 0.21 max. 0.35 0.40-1.20 0.05 0.05

BS3601 ERW 410 410-530 235 22 max. 0.21 max. 0.35 0.40-1.20 0.05 0.05

BS3601 SAW 410 410-530 235 22 max. 0.25 - max. 1.20 0.05 0.05

BS3603 HFS 410 410-530 235 22 max. 0.20 max. 0.35 0.60-1.20 0.045 0.045 Al met 0.015 max

BS3603 HFS 503 440-590 245 16 max. 0.15 0.15-0.35 0.30-0.80 0.025 0.02 3.25-3.75

BS3604-620 (N) 460-610 180 22 0.10-0.15 0.10-0.35 0.40-0.70 0.04 0.04 0.45-0.65 0.70-1.10 Al met 0.020 max

BS3604-622 490-640 275 20 0.08-0.15 max. 0.50 0.40-0.70 0.04 0.04 0.90-1.20 2.00-2.50 Al met 0.020 max

BS3604-625 450-600 170 20 max. 0.15 max. 0.50 0.30-0.60 0.04 0.04 0.45-0.65 4.00-6.00

BS4360-43C 430-540 255 22 max. 0.21 max. 0.40 max. 1.20 0.05 0.05

BS4360-50C 490-640 355 20 max. 0.20 max. 0.40 max. 1.40 0.05 0.05 Nb 0.003-0.10

BS4360-50D 490-640 355 20 max. 0.20 max. 0.40 max. 1.40 0.04 0.04 V 0.003-0.15

各国钢管性能对照表 Tables of Comparative Steel Specifications

02

对照表 Comparisons


Nominal Diameter

(DN)

NPS Inch

Outside Diameter

国际标准 (ISO) 美标 (ANSI) 国标 (GB) 德标 (DIN) 欧标 (EN) 日标 (JIS)

ISO 4200 系列 1 ISO 65 ANSI B36.10 A 系列 B 系列

DIN2448 DIN2458

DIN2440 DIN2441

1 2 5 3 4 8 9 6 7 6 1/8" 10.2 10.20 10.3 10.3 10.0 10.2 10.2 10.2 10.5 8 1/4" 13.5 13.50 13.7 13.7 12.0 13.5 13.5 13.5 13.8

10 3/8" 17.2 17.10 17.1 17.1 14.0 17.2 17.2 17.2 17.3 15 1/2" 21.3 21.40 21.3 21.3 18.0 21.3 21.3 21.3 21.7 20 3/4" 26.9 26.90 26.7 26.9 25.0 26.9 26.9 26.9 27.2 25 1" 33.7 33.75 33.4 33.7 32.0 33.7 33.7 33.7 34.0 32 1-1/4" 42.4 42.45 42.2 42.4 38.0 42.4 42.4 42.4 42.7 40 1-1/2" 48.3 48.35 48.3 48.3 45.0 48.3 48.3 48.3 48.6 50 2" 60.3 60.25 60.3 60.3 57.0 60.3 60.3 60.3 60.5 65 2-1/2" 76.1 75.95 73.0 76.1 76.0 76.1 76.1 76.1 76.3 80 3" 88.9 88.75 88.9 88.9 89.0 88.9 88.9 88.9 89.1 90 3-1/2" - - 101.6 101.6 - 101.6 - - 101.6

100 4" 114.3 114.05 114.3 114.3 108.0 114.3 114.3 114.3 114.3 125 5" 139.7 139.65 141.3 139.7 133.0 139.7 139.7 139.7 139.8 150 6" 168.2 165.20 168.3 168.3 159.0 168.3 165.1 168.3 165.2 175 7" - - - - - 193.7 - - 190.7 200 8" 219.1 - 219.1 219.1 219.0 219.1 - 219.1 216.3 225 9" - - - - - - - - 241.8 250 10" 273 - 273.1 273.0 273.0 273.0 - 273.0 267.4 300 12" 323.9 - 323.9 323.9 325.0 323.9 - 323.9 318.5 350 14" 355.6 - 355.6 355.6 377.0 355.6 - 355.6 355.6

- - - - - 368.0 - - -400 16" 406.4 - 406.4 406.4 426.0 406.4 - 406.4 406.4

- - - - - 419.0 - - -450 18" 457 - 457.0 457.2 478.0 457.0 - 457.0 457.2 500 20" 508 - 508.0 508.0 529.0 508.0 - 508.0 508.0 550 22" - - 559.0 559.0 - 558.8 - - 558.8 600 24" 610 - 610.0 610.0 630.0 610.0 - 610.0 609.6 650 26" - - 660.0 660.0 - - - - 660.4 700 28" 711 - 711.0 711.0 720.0 711.0 - 711.0 711.2 750 30" - - 762.0 762.0 - 762.0 - - 762.0 800 32" 813 - 813.0 813.0 820.0 813.0 - 813.0 812.8 850 34" - - 864.0 864.0 - 863.6 - - 863.6 900 36" 914 - 914.0 914.0 920.0 914.0 - 914.0 914.4 950 38" - - 965.0 965.0 - - - - 965.2

1000 40" 1016 - 1016.0 1016.0 1020.0 1016.0 - 1016.0 1016.0 1050 42" 1067 - 1067.0 1067.0 - - - 1067.0 1066.8 1100 44" 1118 - 1118.0 1118.0 1120.0 - - 1118.0 1117.6 1150 46" - - 1168.0 1168.0 - - - - 1168.4 1200 48" 1219 - 1219.0 1220.0 1220.0 1220.0 - 1219.0 1219.2 1300 52 1321.0 1400 56 1422.00 1422.0 1500 60 1524.0 1600 64 1626.00 1625.3 1700 68 1727.0 1800 72 1829.00 1829.0 1900 76 1930.0 2000 80 2032.00 2032.0

2200 2235.00

2500 2540.00

各国钢管外径尺寸对照表Tables of Comparative Pipe Outside Dimensions C

om

pa

riso

nJASON

Dimensions in mm

03

对照表 Comparisons

DNNPS OD Schedule and Wall Thickness (mm)

inch mm 5S 5 10S 10 20 30 STD 40S 40 60 XS 80S 80 100 120 140 160 XXS

6 1/8 10.3 1.24 1.24 1.45 1.73 1.73 1.73 2.41 2.41 2.41

8 1/4 13.7 1.65 1.65 1.85 2.24 2.24 2.24 3.02 3.02 3.02

10 3/8 17.1 1.65 1.65 1.85 2.31 2.31 2.31 3.20 3.20 3.20

15 1/2 21.3 1.65 1.65 2.11 2.11 2.41 2.77 2.77 2.77 3.73 3.73 3.73 4.78 7.47

20 3/4 26.7 1.65 1.65 2.11 2.11 2.41 2.87 2.87 2.87 3.91 3.91 3.91 5.56 7.82

25 1 33.4 1.65 1.65 2.77 2.77 2.90 3.38 3.38 3.38 4.55 4.55 4.55 6.35 9.09

32 1 1/4 42.2 1.65 1.65 2.77 2.77 2.97 3.56 3.56 3.56 4.85 4.85 4.85 6.35 9.70

40 1 1/2 48.3 1.65 1.65 2.77 2.77 3.18 3.68 3.68 3.68 5.08 5.08 5.08 7.14 10.15

50 2 60.3 1.65 1.65 2.77 2.77 3.18 3.91 3.91 3.91 5.54 5.54 5.54 8.74 11.07

65 2 1/2 73.0 2.11 2.11 3.05 3.05 4.78 5.16 5.16 5.16 7.01 7.01 7.01 9.53 14.02

80 3 88.9 2.11 2.11 3.05 3.05 4.78 5.49 5.49 5.49 7.62 7.62 7.62 11.13 15.24

90 3 1/2 101.6 2.11 2.11 3.05 3.05 4.78 5.74 5.74 5.74 8.08 8.08 8.08

100 4 114.3 2.11 2.11 3.05 3.05 4.78 6.02 6.02 6.02 8.56 8.56 8.56 11.13 13.49 17.12

125 5 141.3 2.77 2.77 3.40 3.40 6.55 6.55 6.55 9.53 9.53 9.53 12.70 15.88 19.05

150 6 168.3 2.77 2.77 3.40 3.40 7.11 7.11 7.11 10.97 10.97 10.97 14.27 18.26 21.95

200 8 219.1 2.77 2.77 3.76 3.76 6.35 7.04 8.18 8.18 8.18 10.31 12.70 12.70 12.70 15.09 18.26 20.62 23.01 22.23

250 10 273.1 3.40 3.40 4.19 4.19 6.35 7.80 9.27 9.27 9.27 12.70 12.70 12.70 15.09 18.26 21.44 25.40 28.58 25.40

300 12 323.9 3.96 3.96 4.57 4.57 6.35 8.38 9.53 9.53 10.31 14.27 12.70 12.70 17.48 21.44 25.40 28.58 33.32 25.40

350 14 355.6 3.96 3.96 4.78 6.35 7.92 9.53 9.53 9.53 11.13 15.09 12.70 12.70 19.05 23.83 27.79 31.75 35.71

400 16 406.4 4.19 4.19 4.78 6.35 7.92 9.53 9.53 9.53 12.70 16.66 12.70 12.70 21.44 26.19 30.96 36.53 40.49

450 18 457.0 4.19 4.19 4.78 6.35 7.92 11.13 9.53 9.53 14.27 19.05 12.70 12.70 23.83 29.36 34.93 39.67 45.24

500 20 508.0 4.78 4.78 5.54 6.35 9.53 12.70 9.53 9.53 15.09 20.62 12.70 12.70 26.19 32.54 38.10 44.45 50.01

550 22 559.0 4.78 4.78 5.54 6.35 9.53 12.70 9.53 22.23 12.70 28.58 34.93 41.28 47.63 53.98

600 24 610.0 5.54 5.54 6.35 6.35 9.53 14.27 9.53 9.53 17.48 24.61 12.70 12.70 30.96 38.89 46.02 52.37 59.54

650 26 660.0 7.92 12.70 9.53 12.70

700 28 711.0 7.92 12.70 15.88 9.53 12.70

750 30 762.0 6.35 7.92 7.92 12.70 15.88 9.53 12.70

800 32 813.0 7.92 12.70 15.88 9.53 17.48 12.70

850 34 864.0 7.92 12.70 15.88 9.53 17.48 12.70

900 36 914.0 7.92 12.70 15.88 9.53 19.05 12.70

950 38 965.0 9.53 12.70

1000 40 1016.0 9.53 12.70

1050 42 1067.0 9.53 12.70

1100 44 1118.0 9.53 12.70

1150 46 1168.0 9.53 12.70

1200 48 1219.0 9.53 12.70

1300 52 1321.0

1400 56 1422.0

1500 60 1524.0

1600 64 1625.3

1700 68 1727.0 Weight = Kg/m (plain end mass) Weight = (OD-T)×T×0.02466Note(1) 5S, 10S,40S, 80S - ASME B36.19 5, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, STD, XS, XXS- ASME B36.10

1800 72 1829.0

1900 76 1930.0

2000 80 2032.0

NOTES:The coefficient 0.02466 takes into account a density equal to 7.85 kg/dm3The calculated values may also be applied to pipes of steels having different density values by multiplying them by an appropriate factor, i.e. - 1.015 for austentitic stainless steels; - 0.985 forferritic and martensitic stainless steels.

美标钢管尺寸Pipe Schedule (ASTM Standard)

Dim

en

sio

n

JASON钢管尺寸 Pipe Dimensions

Dimensions in mm

04


Outside diameter Series 1

Ranges of preferred thickness

A B C D E F G

10.2 1.6 - - - 1.6 2 2.3

13.5 1.6 - - 1.6 2 2.3 2.6

17.2 1.6 - - 1.6 2 2.3 3.2

21.3 1.6 - - 1.8 2 3.2 4

26.9 1.6 - - 1.8 2 3.2 4

33.7 1.6 2 - 2 2.3 3.2 4.6

42.4 1.6 2 - 2.3 2.6 3.6 5

48.3 1.6 2 - 2.3 2.6 3.6 5

60.3 1.6 2 2.3 2.3 2.9 4 5.6

76.1 1.6 2.3 2.6 2.6 2.9 5 7.1

88.9 2 2.3 2.9 2.9 3.2 5.6 8

114.3 2 2.6 2.9 3.2 3.6 6.3 8.8

139.7 2 2.6 3.2 3.6 4 6.3 10

168.3 2 2.6 3.2 4 4.5 7.1 11

219.1 2 2.6 3.6 4.5 6.3 8 12.5

273 2 3.6 4 5 6.3 10 14.2

323.9 2.6 4 4.5 5.6 7.1 10 16

355.6 2.6 4 5 5.6 8 11 17.5

406.4 2.6 4 5 6.3 8.8 12.5 20

457 3.2 4 5 6.3 10 14.2 22.2

508 3.2 5 5.6 6.3 11 16 25

610 3.2 5.6 6.3 6.3 12.5 17.5 30

711 4 6.3 7.1 7.1 14.2 20 32

813 4 7.1 8 8 16 22.2 36

914 4 8 8.8 10 17.5 25 40

1016 4 8.8 10 10 20 28 45

1067 - 8.8 10 11 - - -

1118 - 8.8 10 11 - - -

1219 - 10 11 12.5 - - -

1422 - 12.5 14.2 14.2 - - -

1626 - 14.2 16 16 - - -

1829 - 14.2 16 17.5 - - -

2032 - 16 17.5 20 - - -

2235 - 17.5 20 22.2 - - -

2540 - 20 22.2 25 - - -

NOTE - The preferred thicknesses listed in ranges D and E are used particularly for plain end commercial quality steel tubes for general use. The ranges A, 6 and C are normally used only for stainless steels but may in certain circumstances be used for other types of steel. In the revision of existing standards or in the preparation of new standards the same designation of ranges of thickness shall be used as in this table.

国际标准或欧标钢管尺寸Massed Per Unit Length (ISO or EN Standard)

Dim

en

sio

nJASON

钢管尺寸 Pipe Dimensions

Dimensions in mm

05

Weight in kgs

Utside Diameter mm Series

Thickness,mm

0.5 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.3 2.6 2.9 3.2 3.6 4 4.5 5 5.4 5.6

1 2 3 Masses Per Length,kg/m

10.2 0.120 0.142 0.185 0.227 0.266 0.304 0.339 0.373 0.404 0.448 0.487

12 0.142 0.169 0.221 0.271 0.320 0.366 0.410 0.453 0.493 0.550 0.603 0.651 0.694

12.7 0.150 0.179 0.235 0.289 0.340 0.390 0.438 0.484 0.528 0.590 0.648 0.701 0.750

13.5 0.160 0.191 0.251 0.308 0.364 0.418 0.470 0.519 0.567 0.635 0.699 0.758 0.813 0.879

14 0.166 0.198 0.260 0.321 0.379 0.435 0.489 0.542 0.592 0.664 0.731 0.794 0.852 0.923

16 0.191 0.228 0.300 0.370 0.438 0.504 0.568 0.630 0.691 0.777 0.859 0.937 1.01 1.10 1.18

17.2 0.206 0.246 0.324 0.400 0.474 0.546 0.616 0.684 0.750 0.845 0.936 1.02 1.10 1.21 1.3 1.41

18 0.216 0.257 0.339 0.419 0.497 0.573 0.647 0.719 0.789 0.891 0.987 1.08 1.17 1.28 1.38 1.50

19 0.228 0.272 0.359 0.444 0.527 0.608 0.687 0.764 0.838 0.947 1.05 1.15 1.25 1.37 1.48 1.61 1.73

20 0.240 0.287 0.379 0.469 0.556 0.642 0.726 0.808 0.888 1.00 1.12 1.22 1.33 1.46 1.58 1.72 1.85

21.3 0.256 0.306 0.404 0.501 0.595 0.687 0.777 0.866 0.952 1.08 1.20 1.32 1.43 1.57 1.71 1.86 2.01 2.12

22 0.265 0.317 0.418 0.518 0.616 0.711 0.805 0.897 0.986 1.12 1.24 1.37 1.48 1.63 1.78 1.94 2.10 2.21

25 0.302 0.361 0.477 0.592 0.704 0.815 0.923 1.03 1.13 1.29 1.44 1.58 1.72 1.90 2.07 2.28 2.47 2.61 2.68

25.4 0.307 0.367 0.485 0.602 0.716 0.829 0.939 1.05 1.15 1.31 1.46 1.61 1.75 1.94 2.11 2.32 2.52 2.66 2.73

26.9 0.326 0.389 0.515 0.639 0.761 0.880 0.998 1.11 1.23 1.40 1.56 1.72 1.87 2.07 2.26 2.49 2.70 2.86 2.94

30 0.364 0.435 0.576 0.715 0.852 0.987 1.12 1.25 1.38 1.57 1.76 1.94 2.11 2.34 2.56 2.83 3.08 3.28 3.37

31.8 0.386 0.462 0.612 0.760 0.906 1.05 1.19 1.33 1.47 1.67 1.87 2.07 2.26 2.50 2.74 3.03 3.30 3.52 3.62

32 0.388 0.465 0.616 0.765 0.911 1.06 1.20 1.34 1.48 1.68 1.89 2.08 2.27 2.52 2.76 3.05 3.33 3.54 3.65

33.7 0.409 0.490 0.649 0.806 0.962 1.12 1.27 1.42 1.56 1.78 1.99 2.20 2.41 2.67 2.93 3.24 3.54 3.77 3.88

35 0.425 0.509 0.675 0.838 1.00 1.16 1.32 1.47 1.63 1.85 2.08 2.30 2.51 2.79 3.06 3.38 3.70 3.94 4.06

38 0.462 0.553 0.734 0.912 1.09 1.26 1.44 1.61 1.78 2.02 2.27 2.51 2.75 3.05 3.35 3.72 4.07 4.34 4.47

40 0.487 0.583 0.773 0.962 1.15 1.33 1.52 1.70 1.87 2.14 2.40 2.65 2.90 3.23 3.55 3.94 4.32 4.61 4.75

42.4 0.517 0.619 0.821 1.02 1.22 1.42 1.61 1.80 1.99 2.27 2.55 2.82 3.09 3.44 3.79 4.21 4.61 4.93 5.08

44.5 0.543 0.650 0.862 1.07 1.28 1.49 1.69 1.90 2.10 2.39 2.69 2.98 3.26 3.63 4.00 4.44 4.87 5.21 5.37

48.3 0.706 0.937 1.17 1.39 1.62 1.84 2.06 2.28 2.61 2.93 3.25 3.56 3.97 4.37 4.86 5.34 5.71 5.90

51 0.746 0.990 1.23 1.47 1.71 1.95 2.18 2.42 2.76 3.10 3.44 3.77 4.21 4.64 5.16 5.67 6.07 6.27

54 0.790 1.05 1.31 1.56 1.82 2.07 2.32 2.56 2.93 3.30 3.65 4.01 4.47 4.93 5.49 6.04 6.47 6.68

57 0.835 1.11 1.38 1.65 1.92 2.19 2.45 2.71 3.10 3.49 3.87 4.25 4.74 5.23 5.83 6.41 6.87 7.10

60.3 0.883 1.17 1.46 1.75 2.03 2.32 2.60 2.88 3.29 3.70 4.11 4.51 5.03 5.55 6.19 6.82 7.31 7.55

63.5 0.931 1.24 1.54 1.84 2.14 2.44 2.74 3.03 3.47 3.90 4.33 4.76 5.32 5.87 6.55 7.21 7.74 8.00

70 1.37 1.70 2.04 2.37 2.70 3.03 3.35 3.84 4.32 4.80 5.27 5.90 6.51 7.27 8.01 8.60 8.89

73 1.42 1.78 2.12 2.47 2.82 3.16 3.50 4.01 4.51 5.01 5.51 6.16 6.81 7.60 8.38 9.00 9.31

76.1 1.49 1.85 2.22 2.58 2.94 3.30 3.65 4.19 4.71 5.24 5.75 6.44 7.11 7.95 8.77 9.42 9.74

82.5 1.61 2.01 2.41 2.80 3.19 3.58 3.97 4.55 5.12 5.69 6.26 7.00 7.74 8.66 9.56 10.3 10.6

88.9 1.74 2.17 2.60 3.02 3.44 3.87 4.29 4.91 5.53 6.15 6.76 7.57 8.38 9.37 10.3 11.1 11.6

101.6 2.97 3.46 3.95 4.43 4.91 5.63 6.35 7.06 7.77 8.70 9.63 10.8 11.9 12.8 13.3

108 3.16 3.68 4.20 4.71 5.23 6.00 6.76 7.52 8.27 9.27 10.3 11.5 12.7 13.7 14.1

114.3 3.35 3.90 4.45 4.99 5.54 6.35 7.16 7.97 8.77 9.83 10.9 12.2 13.5 14.5 15.0

127 4.95 5.56 6.17 7.07 7.98 8.88 9.77 11.0 12.1 13.6 15.0 16.2 16.8

133 5.18 5.82 6.46 7.41 8.36 9.30 10.2 11.5 12.7 14.3 15.8 17.0 17.6


We

igh

t

JASON钢管重量 Pipe Weight

06


Weight in kgs


www.jason-steel.com

钢管

PIP

ES

AN

D T

UB

ES

Outside Diameter mm Series

Thickness,mm

0.5 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.3 2.6 2.9 3.2 3.6 4 4.5 5 5.4 5.6


139.7 5.45 6.12 6.79 7.79 8.79 9.78 10.8 12.1 13.4 15.0 16.6 17.9 18.5

141.3 5.51 6.19 6.87 7.88 8.89 9.90 10.9 12.2 13.5 15.2 16.8 18.1 18.7

152.4 5.95 6.69 7.42 8.51 9.61 10.7 11.8 13.2 14.6 16.4 18.2 19.6 20.3

159 6.21 6.98 7.74 8.89 10.0 11.2 12.3 13.8 15.3 17.1 19.0 20.5 21.2

168.3 6.58 7.39 8.20 9.42 10.6 11.8 13.0 14.6 16.2 18.2 20.1 21.7 22.5

177.8 7.81 8.67 9.95 11.2 12.5 13.8 15.5 17.1 19.2 21.3 23.0 23.8

193.7 8.52 9.46 10.9 12.3 13.6 15.0 16.9 18.7 21.0 23.3 25.1 26.0

219.1 9.65 10.7 12.3 13.9 15.5 17.0 19.1 21.2 23.8 26.4 28.5 29.5

244.5 12.0 13.7 15.5 17.3 19.0 21.4 23.7 26.6 29.5 31.8 33.0

273 13.4 15.4 17.3 19.3 21.3 23.9 26.5 29.8 33.0 35.6 36.9

323.9 20.6 23.0 25.3 28.4 31.6 35.4 39.3 42.4 44.0

355.6 22.6 25.2 27.8 31.3 34.7 39.0 43.2 46.6 48.3

406.4 25.9 28.9 31.8 35.8 39.7 44.6 49.5 53.4 55.4

457 35.8 40.3 44.7 50.2 55.7 60.1 62.3

508 39.8 44.8 49.7 55.9 62.0 66.9 69.4

559 43.9 49.3 54.7 61.5 68.3 73.7 76.4

610 47.9 53.8 59.8 67.2 74.6 80.5 83.5

660 64.7 72.7 80.8 87.2 90.4

711 69.7 78.4 87.1 94.0 97.4

762 74.8 84.1 93.3 101 104

813 79.8 89.7 99.6 108 112

864 84.8 95.4 106 114 119

913 89.8 101 112 121 125

1016 99.8 112 125 135 140

1067 131 141 147

1118 137 148 154

1168 143 155 161

1219 150 162 168

1321 182

1422 196

1524

1626

1727

1829

1930

2032

2134

2235

2337

2438

2540

We

igh

tJASON

钢管重量 Pipe Weight

07


Thickness,mm

6.3 7.1 8 8.8 10 11 12.5 14.2 16 17.5 20 22.2 25 28 30 32 36 40 45 50 55 60 65


10.2

12

12.7

13.5

14

16

17.2

18

19

20

21.3

22

25 2.91

25.4 2.97

26.9 3.20 3.47 3.73

30 3.68 4.01 4.34

31.8 3.96 4.32 4.70

32 3.99 4.36 4.74

33.7 4.26 4.66 5.07 5.40

35 4.46 4.89 5.33 5.69

38 4.93 5.41 5.92 6.34 6.91

40 5.24 5.76 6.31 6.77 7.40

42.4 5.61 6.18 6.79 7.29 7.99

44.5 5.94 6.55 7.20 7.75 8.51 9.09 9.86

48.3 6.53 7.21 7.95 8.57 9.45 10.1 11.0

51 6.94 7.69 8.48 9.16 10.1 10.9 11.9

54 7.41 8.21 9.08 9.81 10.9 11.7 12.8 13.9

57 7.88 8.74 9.67 10.5 11.6 12.5 13.7 15.0

60.3 8.39 9.32 10.3 11.2 12.4 13.4 14.7 16.1 17.5

63.5 8.89 9.88 10.9 11.9 13.2 14.2 15.7 17.3 18.7

70 9.90 11.1 12.2 13.3 14.8 16.0 17.7 19.5 21.3 22.7

73 10.4 11.5 12.8 13.9 15.5 16.8 18.7 20.6 22.5 24.0

76.1 10.8 12.1 13.4 14.6 16.3 17.7 19.6 21.7 23.7 25.3 27.7

82.5 11.8 13.2 14.7 16.0 17.9 19.4 21.6 23.9 26.2 28.1 30.8 33.0

88.9 12.8 14.3 16.0 17.4 19.5 21.1 23.6 26.2 28.8 30.8 34.0 36.5 39.4

101.6 14.8 16.5 18.5 20.1 22.6 24.6 27.5 30.6 33.8 36.3 40.2 43.5 47.2 50.8

108 15.8 17.7 19.7 21.5 24.2 26.3 29.4 32.8 36.3 39.1 43.4 47.0 51.2 55.2 57.7

114.3 16.8 18.8 21.0 22.9 25.7 28.0 31.4 35.1 38.8 41.8 46.5 50.1 55.1 59.6 62.4 64.9

127 18.8 21.0 23.5 25.7 28.9 31.5 35.3 39.5 43.8 47.3 52.8 57.4 62.9 68.4 71.8 75.0 80.8

133 19.7 22.0 24.7 27.0 30.3 33.1 37.1 41.6 46.2 49.8 55.7 60.7 66.6 72.5 76.2 79.7 86.1 91.7

139.7 20.7 23.2 26.0 28.4 32.0 34.9 39.2 43.9 48.8 52.7 59.0 64.3 70.7 77.1 81.2 85.0 92.1 98.4

JASON

We

igh

t

Weight in kgs


08




Thickness,mm

6.3 7.1 8 8.8 10 11 12.5 14.2 16 17.5 20 22.2 25 28 30 32 36 40 45 50 55 60 65


141.3 21.0 23.5 26.3 28.8 32.4 35.3 39.7 44.5 49.4 53.4 59.8 65.2 71.7 78.2 82.3 86.3 93.5 99.9

152.4 22.7 25.4 28.5 31.2 35.1 38.4 43.1 48.4 53.8 58.2 65.3 71.3 78.5 85.9 90.6 95.0 103 111 119

159 23.7 26.6 29.8 32.6 36.7 40.1 45.2 50.7 56.4 61.1 68.6 74.9 82.6 90.5 95.4 100 109 117 127

168.3 25.2 28.2 31.6 34.6 39.0 42.7 48.0 54.0 60.1 65.1 73.1 80.0 88.3 96.9 102 108 117 127 137 146

177.8 26.6 29.9 33.5 36.7 41.4 45.2 51.0 57.3 63.8 69.2 77.8 85.2 94.2 103 109 115 126 136 147 158 167

193.7 29.1 32.7 36.6 40.1 45.3 49.6 55.9 62.9 70.1 76.0 85.7 93.9 104 114 121 128 140 152 165 177 188 198

219.1 33.1 37.1 41.6 45.6 51.6 56.5 63.7 71.8 80.1 87.0 98.2 108 120 132 140 148 163 177 193 209 223 235 247

244.5 37.0 41.6 46.7 51.2 57.8 63.3 71.5 80.6 90.2 98.0 111 122 135 149 159 168 185 202 221 240 267 273 288

273 41.4 46.6 52.3 57.3 64.9 71.7 80.3 90.6 101 110 125 137 153 169 180 190 210 230 253 275 296 315 333

323.9 49.3 55.5 62.3 68.4 77.4 84.9 96.0 108 121 132 150 165 184 204 217 230 256 280 310 338 365 390 415

355.6 54.3 61.0 68.6 75.3 85.2 93.5 106 120 134 146 166 183 204 226 141 255 284 311 345 377 408 437 466

406.4 62.2 69.9 78.6 86.3 97.8 107 121 137 154 168 191 210 235 261 278 295 329 361 401 439 477 513 547

457 70.0 78.8 88.6 97.3 110 121 137 155 174 190 216 238 266 296 316 335 374 411 457 502 545 587 628

508 77.9 87.7 98.6 108 123 135 153 173 194 212 241 266 298 331 354 376 419 462 514 565 614 663 710

559 85.9 96.6 109 119 135 149 168 191 214 234 266 294 329 367 391 416 464 512 570 628 684 738 792

610 93.8 106 119 130 148 162 184 209 234 256 291 322 361 402 429 456 510 562 627 691 753 814 874

660 102 114 129 141 160 176 200 226 254 277 316 349 392 436 466 496 554 612 683 752 821 888 954

711 109 123 139 152 173 190 215 244 274 299 341 377 423 472 504 536 599 662 739 815 890 963 1036

762 117 132 149 163 185 204 231 262 294 321 366 405 454 507 548 576 645 712 796 878 959 1039 1117

813 125 141 159 175 198 218 247 280 314 343 391 433 486 542 579 616 690 763 852 941 1028 1114 1199

864 133 150 169 186 211 231 262 298 335 365 416 461 517 577 617 657 735 813 909 1004 1097 1190 1281

913 141 159 179 196 223 245 278 315 354 387 441 488 548 612 654 696 780 862 964 1065 1165 1264 1361

1016 157 177 199 219 248 273 309 351 395 431 491 544 611 682 729 777 870 963 1078 1191 1303 1415 1524

1067 165 186 209 230 261 286 325 369 415 453 516 572 642 717 767 817 915 1013 1134 1254 1373 1490 1606

1118 173 195 219 241 273 300 341 387 435 475 542 600 674 753 805 857 961 1063 1191 1317 1442 1556 1688

1168 180 203 229 252 286 314 356 404 455 497 566 627 705 787 842 896 1005 1113 1246 1379 1510 1639 1768

1219 188 212 239 263 298 328 372 422 475 519 591 655 736 822 880 937 1050 1163 1303 1441 1579 1715 1850

1321 204 230 259 285 323 355 403 458 515 563 942 711 799 893 955 1017 1141 1264 1416 1567 1717 1866 2013

1422 220 248 279 307 348 383 435 493 555 606 692 766 861 963 1030 1097 1231 1363 1528 1692 1854 2015 2175

1524 236 266 299 329 373 410 466 529 595 650 742 822 924 1033 1105 1177 1321 1464 1641 1818 1993 2166 2339

1626 252 283 319 351 399 438 497 564 635 694 792 878 987 1103 1181 1258 1412 1565 1755 1943 2131 2317 2502

1727 301 339 373 423 466 529 600 675 738 842 933 1049 1173 1256 1338 1501 1664 1867 2068 2268 2467 2664

1829 319 359 395 449 493 560 636 715 782 892 989 1112 1244 1331 1418 1592 1765 1980 2194 2406 2618 2828

1930 379 417 474 521 591 671 755 825 942 1044 1175 1313 1406 1498 1682 1864 2092 2318 2543 2767 2990

2032 399 439 499 548 623 707 795 869 992 1100 1237 1384 1481 1578 1772 1965 2205 2444 2682 2918 3153

2134 461 524 576 654 742 836 913 1043 1156 1300 1454 1557 1659 1863 2066 2318 2570 2820 3069 3317

2235 483 549 604 685 778 876 957 1093 1211 1363 1524 1631 1739 1952 2165 1430 2694 2957 3218 3479

2337 574 631 717 813 916 1001 1143 1267 1425 1594 1707 1819 2043 2266 2544 2820 3095 3369 3642

2438 599 658 748 849 956 1045 1193 1323 1488 1664 1782 1899 2133 2366 2656 2945 3232 3519 3804

2540 624 686 779 885 996 1089 1243 1378 1551 1735 1857 1979 2223 2466 2769 3070 3371 3670 3967

www.jason-steel.comJASON

钢管

PIP

ES

AN

D T

UB

ES

We

igh

t

Weight in kgs


09


Dim

en

sio

n

JASON钢管尺寸 Pipe Dimensions

NOTE:If any thickness other than those given in the above Tablet is Particularly required, a relevant thickness specified in JIS G 3459 or JIS G 3468 maybe used, as agreed between the purchaser and manufacturer.

Dimensions in mm

日标钢管尺寸Pipe Schedule (JIS Standard)

Nominal Diameter Outside

Diameter

Nominal Thickness

Schedule 5S Schedule 10S Schedule 20S

A B Inside diameter Thickness Inside Diameter Thickness Inside Diameter Thickness

15 1/2 21.7 18.4 1.65 17.5 2.1 16.7 2.5

20 3/4 27.2 23.9 1.65 23.0 2.1 22.2 2.5

25 1 34.0 30.7 1.65 28.4 2.8 28.0 3.0

32 1 1/4 42.7 39.4 1.65 37.1 2.8 36.7 3.0

40 1 1/2 48.6 45.3 1.65 43.0 2.8 42.6 3.0

50 2 60.5 57.2 1.65 54.9 2.8 53.5 3.5

65 2 1/2 76.3 72.1 2.1 70.3 3.0 69.3 3.5

80 3 89.1 84.9 2.1 83.1 3.0 81.1 4.0

90 3 1/2 101.6 97.4 2.1 95.6 3.0 93.6 4.0

100 4 114.3 110.1 2.1 108.3 3.0 106.3 4.0

125 5 139.8 134.2 2.8 133.0 3.4 129.8 5.0

150 6 165.2 159.6 2.8 158.4 3.4 155.2 5.0

200 8 216.3 210.7 2.8 208.3 4.0 203.3 6.5

250 10 267.4 260.6 3.4 259.4 4.0 254.4 6.5

300 12 318.5 310.5 4.0 309.5 4.5 305.5 6.5

350 14 355.6 347.6 4.0 345.6 5.0 339.6 8.0

400 16 406.4 397.4 4.5 396.4 5.0 390.4 8.0

450 18 457.2 448.2 4.5 447.2 5.0 441.2 8.0

500 20 508.0 498.0 5.0 497.0 5.5 489.0 8.0

550 22 558.8 548.8 5.0 547.8 5.5 539.8 9.5

600 24 609.6 598.6 5.5 596.6 6.5 590.6 9.5

650 26 660.4 649.4 5.5 644.4 8.0 635.0 9.5

700 28 711.2 700.2 5.5 695.2 8.0 685.8 12.7

750 30 762.0 749.0 6.5 746.0 8.0 736.6 12.7

800 32 812.8 - - 796.8 8.0 787.4 12.7

850 34 863.6 - - 847.6 8.0 838.2 12.7

900 36 914.4 - - 898.4 8.0 889.0 12.7

1000 40 1016.0 - - 997.0 9.5 987.4 14.3

10


www.jason-steel.com

钢管

PIP

ES

AN

D T

UB

ES

Dim

en

sio

nJASON

钢管尺寸 Pipe Dimensions

DN

Outsidge Diameter

(mm)

Wall Thickness (mm)

Sch Sch Sch LG Sch Sch STD Sch Sch XXS Sch Sch Sch Sch Sch

Series A Series B 5S 10s 20s 20 30 40 60 80 100 120 140 160

15 21.30 18.00 1.60 2.10 2.60 - - - - 2.90 - - 3.60 - - - 4.50

20 26.90 25.00 1.60 2.10 2.60 - - - - 2.90 - - 4.00 - - - 5.60

25 33.70 32.00 1.60 2.80 3.20 - - - - 3.20 - - 4.50 - - - 6.30

32 42.40 38.00 1.60 2.80 3.20 - - - - 3.60 - - 5.00 - - - 6.30

40 48.30 45.00 1.60 2.80 3.20 - - - - 3.60 - - 5.00 - - - 7.10

50 60.30 57.00 1.60 2.80 3.60 - 3.20 - - 4.00 - - 5.60 - - - 8.80

65 76.10 76.00 2.00 3.00 3.60 - 4.50 - - 5.00 - - 7.10 - - - 10.00

80 88.90 89.00 2.00 3.00 4.00 - 4.50 - - 5.60 - - 8.00 - - - 11.00

90 101.60 - 2.00 3.00 4.00 - 4.50 - - 5.60 - - 8.00 - - - 12.50

100 114.30 108.00 2.00 3.00 4.00 - 5.00 - - 5.90 - - 8.80 - 11.00 - 14.20

125 139.70 133.00 2.90 3.40 5.00 - 5.00 - - 6.30 - - 10.00 - 12.50 - 16.00

150 168.30 159.00 2.90 3.40 5.00 - 5.60 - - 7.10 - - 11.00 - 14.20 - 17.50

200 219.10 219.00 2.90 4.00 6.30 - 6.30 7.10 - 8.00 10.00 - 12.50 16.00 17.50 20.00 22.20

250 273.00 273.00 3.60 4.00 6.30 - 6.30 8.00 - 8.80 12.50 - 16.00 17.50 22.20 25.00 28.00

300 323.90 325.00 4.00 4.50 6.30 - 6.30 8.80 - 10.00 14.20 - 17.50 22.20 25.00 28.00 32.00

350 355.60 377.00 4.00 5.00 8.00 8.00 8.00 10.00 10.00 11.00 16.00 13.00 20.00 25.80 28.00 32.00 36.00

400 406.40 426.00 4.00 5.00 8.00 8.00 8.00 10.00 10.00 12.50 17.50 13.00 22.20 28.00 30.00 36.00 40.00

450 457.20 478.00 4.00 5.00 8.00 8.00 8.00 11.00 10.00 14.20 20.00 13.00 25.00 30.00 36.00 40.00 45.00

500 508.00 529.00 4.50 5.60 8.00 8.00 10.00 12.50 10.00 16.00 20.00 13.00 28.00 32.00 40.00 45.00 50.00

550 559.00 - 5.00 5.60 - 8.00 - - 10.00 - - 13.00 30.00 - - - -

600 610.00 630.00 5.60 6.30 - 8.00 - - 10.00 17.50 - 13.00 32.00 - - - -

650 660.00 - - - - 8.00 - - 10.00 - - 13.00 - - - - -

700 711.00 720.00 - - 8.00 10.00 13.00 - - - - -

750 762.00 - - - - 8.00 - - 10.00 - - 13.00 - - - - -

800 813.00 820.00 - - - 8.00 - - 10.00 - - 13.00 - - - - -

850 864.00 - - - - 8.00 - - 10.00 - - 13.00 - - - - -

900 914.00 920.00 8.00 10.00 13.00 - - - - -

950 965.00 - - - - 8.00 - - 10.00 - - 13.00 - - - - -

1000 1016.00 1020.00 - - - 8.00 - - 10.00 - - 13.00 - - - - -

1050 1067.00 - - - - 8.00 - - 10.00 - - 13.00 - - - - -

1100 1118.00 1120.00 - - - 8.00 - - 10.00 - - 13.00 - - - - -

1150 1168.00 - - - - 8.00 - - 10.00 - - 13.00 - - - - -

1200 1220.00 1220.00 - - - 8.00 - - 10.00 - - 13.00 - - - - -

NOTES:(1) Sch5S, Sch10S, Sch20S are only for stainless steel fittings;(2) LG is for thin wall thickness; STD is for standard thickness; XS is for large thickness;(3) Wall thickness of DN ＞ 500 is according to standard GB/T 13401.

国标钢管尺寸Pipe Schedule(GB Standard)

Dimensions in mm

11

Ma

teria

l

JASON美标管道技术资料 ASTM Pipes Technical Data

This is a heat resistant alloy of the Austenitic type containing 25% chromium and 20% nickel very similar to Type 310. The important difference lies in the silicon content which is 1.5-3%.The effect of silicon on the heat resisting properties of iron-chromium-nickel alloys is well recognized and has the effect of reducing carbon and sulphur pick up and to reduce damaging scale formation and increased resistance to inter-granular attack.Used extensively for manufacture of chain links and mesh belts and other furnance parts subjected to cyclic operations or

Type 314

This alloy has less chromium and nickel than others in the type 300 series. The alloy is unstable austenite which transforms to martensitic type phase with severe cold working. It develops valuable mechanical properties up to 300,000 PSI when cold worked and the high tensile strength developed makes it specially suitable for applications requiring high wear resistance such as in the automotive, kitchenware and furniture hardware items as well as structural members of transport vehicles.

This grade is the basic 18/8 type in the 300 series and offers good corrosion resistance combined with good physical properties.

For intermittent, service involving frequent heating and cooling in air, it is recommended that the upper temperature limit should be 1600°F (870°C). Because of the possibility of carbide precipitation in the temperature range 800°F-1600°F (425°C-870°C) the unmodified 18/8 alloys may be subject to attack by severely corrosive solutions.

Carbide precipitation is not in itself harmful, but it does leave the metal susceptible to intergranular-type corrosion in the presence of severe corrosive agents.

Stainless Steel Austenitic Alloys

Type 301 17/7

Type 302

An 18%Cr-9%Ni nonhardenable alloy containing selenium and extra amounts of sulphur and phosphorus. Most readily machinable of all austenitic grades. Properties close to those of Type 304, elongation somewhat lower. Nonmagnetic in annealed condition.

Weldable by res istance methods-fus ion welding not recommended.

Resistant to scaling up to 1650°F. For use where a free cutting material is required; offers high resistance to corrosion; assures good end product surface. Typical applications: bushings, casters, shafts, rivets, valve and pump parts.

Type 303

A widely used grade that has high strength at elevated temperatures and good corrosion resisting properties for applications in a wide range of corrosive media. Less susceptible to precipitations of carbides and therefore suitable for use where welding conditions do not involve prolonged exposures

Type 304

A low carbon variation of Type 304 with a greatly reduced tendency to inter-crystalline disintegration after welding.

A higher chromium and nickel content than the basic 18/8 types. Primarily a heat resistant alloy containing 25%Cr and 12%Ni with good high tensile and creep strength at elevated temperatures.

Subject to carbide precipitation in range 800°F-1600°F (425°C- 870°C). This alloy is easily welded or machined, is ductile and malleable. Resists oxidization up to 2000°F (1095°C) for continuous service. Not recommended for heat resistant applications of a cyclic nature because the different rates of expansion of the scale formed and the parent metal results in progressive scaling. Intermittent service to 1800°F (982°C).

This is a heat resistant alloy containing 25%Cr and 20%Ni suitable for use at elevated temperatures up to 2100°F (1150°C) for continuous service or in applications involving cyclic operation to 1900°F (1038°C) providing reducing sulphur gases are not present. Nonmagnetic at room temperatures in annealed condition with excellent weldability. Mechanical and corrosion resistance properties similar to, but better than Type 304. Offers good resistance to sea water and fuming nitric acid at room temperatures. Used extensively for furnace components, still tubes and fuel lines. Silicon content 1.5%max.

Type 304L

Type 309

Type 310

to temperatures in the 800°F-1600°F (425°C-870°C) range. Excellent mechanical properties as low as -325°F (-198°C). Extensively used in the food and drink processing equipment decorative applications and heat exchangers. Scale resistant in continuous service to 1600°F and 1450°F for intermittent service.

产品材料Materials

12


www.jason-steel.com

钢管

PIP

ES

AN

D T

UB

ES

Ma

teria

lJASON

美标管道技术资料 ASTM Pipes Technical Data

A 18%Cr - 10%Ni - 2 - 3%Mo. alloy that offers the best corrosion resistance of the standard Austenitic grades. This type, with the molybdenum content, is particularly resistant to sulphur, sulphur acids, phosphoric, formic and various hot organic acids. Offers increased resistance to pitting and pinhole type corrosion when in contact with acid vapours and salt solutions of the halide group in general, and has good high temperature and creep strength. Since this grade is not stabilized it is susceptible to inter-granular corrosion when exposed to the critical temperature range 800°F-1600°F (425°C-870°C) and therefore must be heat treated after welding. Extensively used in pulp and paper, chemical, petro-chemical and dyeing industries for the more corrosive service applications. Scale resistance to 1600°F (871°C) max. for continuous and 1500°F (816°C) for intermittent service.

A higher molybdenum and chromium bearing austenitic stainless steel than Type 316. Has optimum corrosion resistance. Is more resistant to inter-granular attack than Type 316 and is preferred where light gauge material is to be welded. Suitable for application srequiring resistance to sulphuric acid concentrations up to 5% at temperatures to 840°F (450°C). Also where condensation of sulphur bearing gases occurs and increased resistance to pitting corrosion is desired.

An 18% Cr-10% Ni titanium-stabilised alloy designed to overcome susceptibility to carbide precipitation and resultant

An austenitic, nonmagnetic, corrosion-resisting high nickel-chromium alloy steel. It will endure high heat and is most useful at operating temperatures between 1500°F and 2150°F. Will also withstand prolonged heating in air at temperatures up to 1900°F without excessive scaling. Can be machined, bent, drawn and spun. Can be welded by use of a rod of special chemical composition to prevent weld cracking.

Used for furnace parts, pyrometer protection tubes and heat resisting parts in jet engines.

Similar properties to Type 321 but stabilized by columbium instead of titanium. Superior to Type 321 when subjected to corrosive service in the sensitizing temperature range.

Low carbon modification of Type 316. Can be welded and heated in the range 800°F-1600°C (425°C-870°C) without damage to corrosion resistance.

A versatile grade of stainless steel which combines the advantages of AISI Type 316, 321 and 316L. Basically Type 316 stainless steel but with the addition of a minimum titanium content of 5 x carbon. This gives the steel particular application in structures subjected to temperatures in the 800°F-1600°C (425°C-870°C)where the steel is in contact with corrosive media. Type 316Tican be stress relieved without risk of inter-granular corrosion.

Type 317

Type 321

Type 316L

Type 316Ti

Type 316

Type 330

Type 347


continuous service up to 2100°F (1150°C).

Type 410 is a basic hardenable alloy containing 12% Cr; Magnetic in all conditions and can be hardened to Rockwell C36-40 by quenching or air cooling from 1750-1850o F. Not subject to carbide precipitation, but low in impact properties at low temperatures.

Air hardening, they present some difficulty in welding. Widely used wherever good spring properties are needed. Excellent for Bourdon springs, medical instruments and turbine parts.

Stainless Steel Martensitic Alloys

Type 410

13

inter-granular corrosion. Can be welded without subsequent annealing.

Corrosion resistance similar to Type 304 but with higher creep resistance suitable for use up to 1600°F (870°C) for intermittent service and up to 1475°F (800°C) for continuous service andcan be used in corrosive applications at these temperatures.

Recommended for use where heavy welded or field-erected equipment cannot be annealed. Also used where it is necessary for equipment to be cooled slowly through sensitizing range or where operating temperature is between 800°C-1600°F (425°C-870°C).

Stainless Steel Ferritic Alloys

Basic type of straight chromium ferritic alloy steel combining useful corrosion resistance, mechanical properties, ease of formability and low cost. Used extensively as automotive trim.

Type 430

Excellent corrosion resistance, especially to ferric chloride and cupric chloride. Also to wet chlorine gas and hypochlorite and chlorine dioxide solutions. Has excellent high temperature strength.

Resistant to oxidizing and reducing atmospheres to 2000°F.

Primarily used where exceptional corrosion resistance and high temperature strength are required. Typical are the outer sheath for electric tubular heating elements, thermocouple rakes, probes, photographic processing equipment, and lubricating lines for chemical equipement.

* Monel, Inconel and Incoloy are Registered Trade Names of

The International Nickel Co. Ferralium Alloy is Registered Trade Name of Langley Alloys Ltd.

Hastelloy “c”

JASON

14

Ma

teria

l

Combines excellent mechanical properties with corrosion resistance that is generally good and is outstanding under many conditions of exposure. Strength and hardness may be increased by cold working. Scale resistant in sulphur free atmospheres to 1650°F (900°C). Extensively used in contact with reducing acids, food, chemical processing liquors and caustic solutions. Carbon 0.15% max.

Is the low carbon grade of Nickel 200. Carbon content 0.02% max. This alloy has excellent resistance to corrosion and may be used in oxidizing temperatures to 1650°F (900°C).

Re co m m e n d e d fo r s eve re m a n i p u l at i o n a n d u s e i n thermocouple tubing in molten salt bath furnaces.

This alloy is superior in corrosion resistance to commercially pure nickel under oxidizing conditions. Its higher nickel content enables it to retain considerable corrosion resistance under reducing conditions. It resists oxidization at elevated temperatures up to 2150°F (1170°C). Resistant to salt at elevated temperatures up to 1832°F (1000°C). Can be readily welded, brazed and soldered. Extensively used for thermocouple protection tubing, sheathing on electric elements and food processing.

This alloy has good resistance to oxidization up to 2050°F (1100°C) and retains its strength at elevated temperatures. Has excellent workability and welding properties and is superior to Inconel 600 in resisting sulphur and fused neutral salts; comparable in resistance to oxidization; inferior in resistance to nitriding, halogen gases and molten caustics. Used extensively for sheathing on electric elements, furnace muffles and heat exchangers.

Formerly known as Ni-o-nel* Alloy 825, is a titanium stabilized nickel-chromium-iron-molybdenum-copper alloy. It is fully austenitic and resistant to attack by many mineral and organic acids, particularly under oxidising conditions. Has greatly increased resistance to sulphuric acid and phosphoric acid when fluorides are present than the 300 series stainless steels. This alloy resists stress-corrosion cracking when subjected to a wide range of temperature and the more aggressive mineral acids, chlorine, ammonia and ammonium hydroxide solutions.

This metal has outstanding strength to weight ratio and excellent corrosion resistance for certain application in the chemical industry.

Used extensively in the aluminium anodising field and in the food industry or the manufacture of fine chemicals when traces of iron, nickel or chromium can ruin the product. Readily fusion welded provided the metal is thoroughly protected from contamination by oxygen, nitrogen and hydrogen by the conventional shielded arc using a tungsten electrode. Used extensively for electrochemical anodes, chlorine applications, sea water, inhibited reducing acids, nitric acid, urea equipment anodising and plating, textile, food, petroleum industries.

Nickel ＆ Nickel Base Alloys

Inconel 600*

Nickel 200

Incoloy 800*

Incoloy 825*

Titanium


美标管道技术资料 ASTM Pipes Technical Data

Resistance to nitric acid permits the use of Type 430 for specific chemical applications. Has good resistance to atmospheric corrosion away from coastal areas. Under oxidizing conditions a tight protective scale is formed on the surface making it useful for equipment subjected to repeated heating and cooling up to 1600°F (870°C). It is magnetic in all tempers and non-hardenable.

Nickel 201


Abbreviations

ANSI - American National Standards Institute

ASTM - American Society of Testing Materials

ASME - Amerian Society of Mechanical Engineers

API - American Petroleum Institute

ANSI B31.1 - Code for Pressure Piping

ANSI B31.3 - Code for Pressure Piping: Petroleum Refinery

Piping

ANSI B31.8 - Gas Transmission and Distributing Piping Systems

API STD 5A - API Specification for Casing, Tubing and Drill Pipe

API STD 5L - API Specification for Line Pipe

API STD 5LX - API Specification for High Test Line Pipe

American Society of Testing

This specification covers seamless carbon steel pipe for high-temperature service in nominal sizes 1/8 to 48 [DN6 to DN 1200] inclusive, with nominal (average) wall thickness as given in ASME B36.10M.

ASTM A106 Grades A & B & C

This specification covers standards for electric-resistance-welded tubes with minimum-wall-thickness made of carbon steel and carbon-manganese steel to be used in boiler tubes, boiler flues, superheater flues, and safe ends.

ASTM A178

This specification covers minimum-wall thickness, seamless

ASTM A179

Materials Specifications

ANSI B36.10 - Wrought Steel and Wrought-lron Pipe covers

diameters and wall thicknesses of pipe 1/4'' to 36'' with the

exception of Schedules 5S and 10S.

ANSI B36.19 - Stainless Steel Pipe.

covers diameters and wall thicknesses of

Stainless Steel pipe in Schedules 5S, 10S,

40S and 80S in size 1/8'' to 30''.

Dimensional Pipe Specifications

This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8 to 26 [DN6 to DN 650], inclusive, with nominal wall thickness.

ASTM A53 Grades A & B

www.jason-steel.com

钢管

PIP

ES

AN

D T

UB

ES

JASON

15

Sp

ec

ifica

tion

美标钢管标准 ASTM Specifications for Pipes

产品标准Specifications

This specification covers minimum-wall-thickness, seamless medium-carbon steel, boiler tubes and boiler flues, including safe ends , arch and stay tubes, and superheater tubes.

The tubing sizes and thicknesses usually furnished to this specification are 1/2 in. to 5 in. [12.7 to 127 mm] in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm], inclusive, in minimum wall thickness.

This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in insidediameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness.

This specification covers several grades of minimum-wall-thickness, seamless, carbon-molybdenum alloy-steel, boiler and superheater tubes. It covers tubes 1/2 to 5 in. [12.7 to 127 mm] inclusive, in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm], inclusive, in minimum wall thickness.

ASTM A209

ASTM A210

ASTM A213

This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel tubes to be used for heat exchangers, condensers, and similar heat-transfer apparatus.

The tubing sizes usually furnished to this specification are to 3 in. [76.2 mm] in outside diameter, inclusive.

ASTM A214

cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. It covers tubes 1/8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter.

This specification covers round and shaped chromium-vanadium alloy steel spring wire having properties and quality intended for the manufacture of springs used at moderately elevated temperatures. This wire shall be either in the annealed and cold-drawn or oil-tempered condition as specified by the purchaser.

ASTM A231

JASON

ASTM A334

ASTM A335

This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.

16

Sp

ec

ifica

tion


This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service. The tubing sizes and thicknesses usually furnished to this specification are 1/4 in. [6.4 mm] in inside diameter and larger and 0.020 in. [0.51 mm] in nominal wall-thickness and heavier. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.38 mm] in thickness.

This specification covers grades of seamless, welded, and heavily cold worked welded austenitic and ferritic/austenitic stainless steel sanitary tubing intended for use in the dairy and food industry and having special surface finishes. Pharmaceutical quality may be requested, as a supplementary requirement. It covers tubes in sizes up to and including 12 in. [300 mm] in outside diameter.

This specification covers seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipe intended for high-temperature and general corrosive service.

Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309Cb, TP309S, TP310Cb, TP310S, TP316, TP321, TP347, and TP348, and are intended for service at temperatures where creep and stress rupture properties are important.

This specification covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures and in other applications requiring notch toughness. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on impact properties.

ASTM A269

ASTM A270

ASTM A312

ASTM A333

This specification covers nominal-wall-thickness welded tubes and heavily cold worked welded tubes made from the austenitic steels, with various grades intended for such use as boiler, superheater, heat exchanger, or condenser tubes.

Grades TP304H, TP309H, TP309HCb, TP310H, TP310HCb, TP316H, TP321H, TP347H, and TP348H are modifications of Grades TP304, TP309S, TP309Cb, TP310S, TP310Cb, TP316, TP321, TP347, and TP348, and are intended for high-temperature service such as for superheaters and reheaters.

The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 12 in. [304.8 mm] in outside diameter and 0.015 to 0.320 in. [0.4 to 8.1 mm], inclusive, in wall thickness.

ASTM A249

ASTM A254

This specification covers double- wall, coppe -brazed steel tubing suitable for general engineering uses, particularly in the automotive, refrigeration, and stove industries for fuel lines, brake lines, oil lines, heating and cooling units, and the like. The tubing

is available in either of two types, single strip or double strip.

ASTM A268

This specification covers a number of grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and high-temperature service. Most of these grades are commonly known as the “straight-chromium” types and are characterized by being ferromagnetic. Two of these grades, TP410 and UNS S 41500, are amenable to hardening by heat treatment, and the high-chromium, ferritic alloys are sensitive to notch-brittleness on slow cooling to ordinary temperatures. These features should be recognized in the use of these materials. Grade TP439 is used primarily for hot-water tank service and does not require post-weld heat treatment to prevent attack of the heat affected zone.



ASTM A358

ASTM A358

This specification covers electric-fusion-welded austenitic chromium-nickel stainless steel pipe suitable for corrosive or high-temperature service, or both, or for general applications.

The selection of the proper grade and requirements for heat treatment shall be at the discretion of the purchaser, dependent on the service conditions to be encountered.

This specification covers electric-fusion-welded austenitic chromium-nickel stainless steel pipe suitable for corrosive or high-temperature service, or both, or for general applications.

The selection of the proper grade and requirements for heat treatment shall be at the discretion of the purchaser, dependent on the service conditions to be encountered.

ASTM A403

This specification covers wrought stainless steel fittings for pressure piping applications. Several grades of austenitic stainless steel alloys are included in this specification Grades are designated with a prefix, WP or CR, based on the

www.jason-steel.com

钢管

PIP

ES

AN

D T

UB

ES

JASON

17

Sp

ec

ifica

tion



ASTM A587

This specification covers electric-resistance-welded low-carbon steel pipe intended for use as process lines.

Pipe ordered under this specification shall be suitable for severe forming operations involving flanging in all sizes and bending to close radii up to and including NPS 4.

This specification covers NPS 1/2 through 10, plus additional sizes.

applicable ASME or MSS dimensional and rating standards, respectively.The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes, if specified, for use in tubular feedwater heaters.

The tubing sizes covered shall be 5/8 to 11/4-in. [15.9 to 31.8-mm] outside diameter, inclusive, with minimum wall thicknesses equal to or greater than 0.045 in. [1.1 mm].

ASTM A556

Documents

Contents · Contents 1. 各国钢管材质对照表 2. 各国钢管性能对照表 ... DIN 17100 DIN 2440/2441 DIN 2440/2441 A 120 - 1387 ISO-65 DIN 1626/3 DIN 1626/3 DIN 2458 DIN