>> LED BACKLIGHT TV OPERATION MANUAL EXIT€¦ · Daydream Daydream: Configure the Daydream (screensaver) settings. When to daydream: Set how many minutes from now to start the Daydream

LED BACKLIGHT TV

OPERATION MANUAL

Please choose your favorite page from the content. If you want to close the operation manual, press the EXITbutton. Also, if you want to return to the previously displayed page,press the (Back) button.

ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | عربي | АҒЫЛШЫН | O'ZBEK TILIDA

>>

1. Part Names1-1. TV1-4. Remote Control Unit

2. How to select the TV Mode2-1. Using the Remote Control Unit2-2. HOME screen2-4. SettingsGoogle Cast™ devices2-5. Devices2-8. TV Setup

3. TV Setup Operation3-1. Introduction3-2. Picture3-18. Audio3-26. General

4. Devices Operation4-1. Video In4-2. Audio Out

5. Direct Button Operation5-1. Changing Channels5-2. Changing Volume5-3. MUTE5-4. FLASHBACK5-5. AUDIO5-6. Sleep Timer5-7. VIEW MODE5-10. NETFLIX

6. Enjoying Photo/Music/Video Playback6-1. Preparation6-3. Selecting the Folders to Play Back6-6. Playing Back Files on a USB MemoryDevice/SD Memory Card/Home NetworkServer6-15. Playing Back Files from a PortableDevice

7. Using LINK Operation7-1. Controlling HDMI Equipment UsingLINK Operation

8. Using a PC8-1. Setting Audio Input8-2. PC Compatibility Chart

9. Using the Internet9-1. Connecting to the Internet9-3. Using Keyboard and Mouse9-4. Notes

10. Appendix10-1. Troubleshooting10-3. Troubleshooting - Error Message10-4. Information on the Software Licensefor This Product

11. Trademarks

12. Specifications12-1. TV12-3. Wireless LAN

13. Dimensional Drawings13-1. LC-45LE580X13-2. LC-50LE580X13-3. LC-60LE580X

Contents

EN Contents


>><<

IMPORTANT INFORMATION

EN Important1


>><<

IMPORTANT INFORMATION

EN Important2


>><<

TV

(Front)

*1 See page 3-3.

(Side)

The illustrations and on-screen displays in this operation manual are for explanation purposes and may varyslightly from the actual operations.The drawings used throughout this manual are based on the LC-50LE580X model.

Part Names

EN 1-1


>><<

TV (Continue)

(Rear)

LC-45LE580X

*1 See the Setup Guide. And see page 7-1for external equipment connection.*2 See page 8-1 for details on the AudioSelect function.*3 Use HDMI IN 1 to connect ARC-compatible equipment.

Part Names

EN 1-2


>><<

TV (Continue)

(Rear)

LC-50/60LE580X

*1 See the Setup Guide. And see page 7-1for external equipment connection.*2 See page 8-1 for details on the AudioSelect function.*3 Use HDMI IN 1 to connect ARC-compatible equipment.*4 This function applicable for certaincountries only.

Part Names

EN 1-3


>><<

Remote Control Unit 1 POWER: Switch the TV power on or enter standby.2 External equipment operational buttons: Operate the externalequipment.3 OPC: To switch the optical picture control on and off. (See page 3-3.)4 TV: Press to access analogue and digital TV mode.5 0-9: Set the channel. (See page 5-1.)

6 (FLASHBACK): Return to the previous channels, HDMI IN 1 through 4, or video input mode. (See page 5-4.)7 NETFLIX: Display the NETFLIX screen.If you press the NETFLIX button when the TV is turned off, the TV turns onand the NETFLIX screen is diplayed. (See page 5-10.)8 DEVICES:Display the Devices screen.Select a TV input source. (See pages 2-5 to 2-7.)9 / / / , (ENTER): Select a desired item on the screen.

10 (Back): Return to the previous screen.11 MUTE: Mute the sound. (See page 5-3.)12 VOL+/-: Set the volume. (See page 5-2.)13 R, G, Y, B: The coloured buttons are correspondingly used to select thecoloured items on the screen.14 AV MODE: Select an audio or video setting. (See page 3-2.)15 VIEW: Select the screen size. (See pages 5-7 to 5-9.)16 MANUAL: Display the operation manual.17 EQ: Select the sound quality. (See page 3-20.)

Part Names

EN 1-4


>><<

Remote Control Unit (Continue) 18 Buttons for useful operations

(Reveal hidden teletext) Display hidden characters.

(Hold) Stop updating teletext pages automatically or release the hold mode.

(Top/Bottom/Full) Set the area of magnification.

(Subpage) Display the teletext subpage directly.

(Teletext) Select the teletext mode.

(Subtitle) Switch subtitle languages on / off.19 EXIT: Turn off the menu screen and application. 20 TV SETUP: Display the TV Setup screen. (See pages 2-8 to 2-9.)

21 (HOME): Display the HOME screen. (See pages 2-1 to 2-3.)22 EPG: DTV: Display the EPG screen.23 CH / : Select the channel. (See page 5-1.)24 SLEEP: Set the sleep timer. (See page 5-6.)25 AUDIO: Selects the audio mode during multichannel audio broadcasts.(See page 5-5.)26 DISPLAY: Display the channel information.27 INFODTV: Display the programme information.

Part Names

EN 1-5


>><<

Using the Remote Control UnitThe main TV modes can be displayed by pressing the DEVICES, and TV SETUP buttons on the remote control unit.

How to select the TV Mode

HOME screen

Press (HOME) to display the HOME screen.

Devices

Press DEVICES again to display the Devices full screen.Press DEVICES to display the Devices peek screen. See pages 2-5 to 2-7 and 4-1 to 4-4 for details of Devices.

Example

TV Setup

Press TV SETUP again to display the TV Setup full screen.Press TV SETUP to display the TV Setup peek screen. See pages 2-8 to 2-9 and 3-1 to 3-45 for details of TV Setup.

EN 2-1


>><<

HOME screenTo display the HOME screen, press the (HOME) button on the remote control unit.

Example

Start a Search. The recommended contents will be displayed. The icons for applications installed on the TV are shown here. Also shown here is an icon for the built-inoperation manual. Added applications are displayed here.


EN 2-2


>><<

HOME screen (Continue)Example

Switch the input. Various Android™ settings can be configured here. For details on the settings, see the next explanation. The network connection status is displayed.

Wireless connection:

Ethernet connection:

No connection:


EN 2-3


>><<

SettingsVarious Android settings can be configured from Settings on the HOMEscreen. The follow settings can be configured.

Device Network: Configure the WiFi and Ethernet settings.Inputs: Change the label for an input terminal, and switch between HDMI CECcontrol settings.Google Cast: Configure various Google Cast settings.System sounds:Switch System Sounds On/Off for HOME screen.Apps: View a list of applications.Daydream Daydream: Configure the Daydream (screensaver) settings.

When to daydream: Set how many minutes from now to start theDaydream.No operation OFF: The TV automatically shuts down if no operationis performed.Start now: Start the Daydream immediately.

Control Power Control【ECO1】Standard: Optimizes power reduction based upon videocontent.【ECO2】Advanced: Optimizes power reduction based upon videocontent and engages Light Sensor. Off: This function does not work.Wake on LAN: Enable the TV to be started by a signal over a LAN.Quick start: You can reduce the TV's start-up time after turning onthe power with the remote control unit.

Storage & Reset: View the memory usage status or perform a reset. When you perform a reset, the TV will be returned to the factory preset values,and the Google™ Accounts will also be deleted.About: Check for system updates and view various information.

Preference

Date & time: Set the date and time.Language: You can select a language. Select from among 11 languages.(English (UK), English (US), French, Portuguese, Simplified Chinese,Indonesian, Thai, Vietnamese, Arabic, Russian and Persian)Keyboard: Switch the keyboard setting.Home screen: Home screen customise settings.Search: Switch the Search function setting.Speech: Switch the Voice search setting.Accessibil ity : Configure Caption, Talkback, and SwitchAccess settings.Some of the Caption settings may not be applied.

Remote &accessories Add accessory: Pair a Bluetooth device.

PersonalLocation: Configure the location settings.Security & Restrictions: Configure the security and restriction settings.Add account: Add an account.

TV Setup Jump to TV Setup: Configure various TV Setup.

NOTEThe menu may be different depending on when you purchased the TV.

Google Cast devicesWhen you connect a device such as a Google Cast-compatible smartphoneor tablet to this TV, you can enjoy video and audio from the device on theTV's large screen and speakers.1 Configure the settings from "HOME" > "Settings" > "Device" > "GoogleCast".

2 Enable the Google Cast function on the Google Cast-compatible deviceand connect to the TV. (The TV screen changes according to the behavior of the device)

NOTEWhen the TV is turned off or the connection is ended on the device,

you must connect the device again.For details about the operation of the Google Cast-compatible device,

check the manual for that device.


EN 2-4


>><<

Devices

Full screen view

Switching between connected devices is possible on the Devices full screen.

1. Press / / / to select the input source, and then press (ENTER).2. Press / to select the "Switch to Device", and the press (ENTER).

An image from the selected source automatically displays.

If the target input is not connected, you will be able to switch to the input, but the correct video and audio will not be output. Be sure to connect theequipment beforehand.

NOTETo display the Devices in the full screen or as a peek screen, see page 2-1.Changing from a full screen view to another mode is possible.


EN 2-5


>><<

Devices (Continue)Peek screen view

The most commonly used input devices can be shown on the Devices peek screen.


EN 2-6


>><<

Devices (Continue)Peek screen configuration

It is possible to configure which input devices to display on the peek screen.Six devices are set by default.To add a different device, first delete a current device, and then add the device.1 Select the device in Devices full screen and open the Devices menu.2 Set "Show in Peek" to "Yes".


EN 2-7


>><<

TV SetupFull screen view

All menus for Picture, Audio, and General can be configured on the TV Setup full screen.

Item displayed in redThis indicates the item currently selected.

Press (ENTER) to go to the adjustment screen for this item. This indicates the current setting for the item.


EN 2-8


>><<

TV Setup (Continue)Peek screen view

The AV Mode, View Mode, Surround, and Equalizer menus can be configured on the TV Setup peek screen.See pages 3-2, 3-20, 3-21, and 5-7 for details on the settings for each menu.

NOTETo display the TV Setup in the full screen or as a peek screen, see page 2-1.Changing from a full screen view to another mode is possible.


EN 2-9


>><<

About Menu ItemsSome menu items may not be displayed

depending on the selected input source.

NOTEThe screens in the operation manual are

for explanation purposes (some areenlarged, others cropped) and may varyslightly from the actual screens.The order of explanations for each menu

item in the following pages is not necessarilyin accordance with the alignment of theitems on the screen.

Introduction

TV Setup Operation

EN 3-1


>><<

ExamplePicture

AV Mode (Changing Pic.Quality)

AV MODE gives you several viewing options tochoose from to best match the surroundingenvironment of the TV, which can vary due tofactors like room brightness, type of programwatched or the type of device connected.These settings will be automatically saved oneach input for convenience.STANDARD: For a highly defined image in anormal lighting.

MOVIE: For a movie.GAME: Lowers image brightness for easierviewing.

DYNAMIC:For a clear-cut image emphasizinghigh contrast, useful for sports viewing.

DYNAMIC (Fixed): Changes the image andsound settings to the factory preset values.No adjustments are allowed.

PC: For PC.

NOTEWhen you play games, "GAME" is

recommended for AV MODE.You can select AV MODE by pressing AV

MODE on the remote control unit.

TV Setup Operation

EN 3-2


>><<

ExamplePicture (Continue)OPC (Light Sensor)

Automatically adjusts the brightness of thescreen.Off: The brightness is fixed at the value set in"Backlight".

On: Automatically adjusts.

NOTEWhen set to "On", the Light Sensor

senses the surrounding light andautomatically adjusts the backlightbrightness. Make sure nothing obstructs theLight Sensor, which could affect its abilityto sense surrounding light.

TV Setup Operation

EN 3-3


>><<

ExamplePicture (Continue)Backlight

Adjusts the picture to your preference with thefollowing picture settings.Selecteditem button button

Backlight The screendims

The screenbrightens

For resetting all Picture adjustment itemsto the factory preset values, press / toselect "Reset Picture", press (ENTER), press / to select "Yes",

and then press (ENTER)NOTE

"Backlight" is not available when you set"OPC" (Light Sensor) to "On".

TV Setup Operation

EN 3-4


>><<

ExamplePicture (Continue)Contrast


Contrast For lesscontrast

For morecontrast


and then press (ENTER)

TV Setup Operation

EN 3-5


>><<

ExamplePicture (Continue)Brightness


Brightness For lessbrightness

For morebrightness



TV Setup Operation

EN 3-6


>><<

ExamplePicture (Continue)Colour


Colour For less colourintensity

For more colourintensity



TV Setup Operation

EN 3-7


>><<

ExamplePicture (Continue)Tint


Tint Skin tonesbecome reddish

Skin tonesbecome greenish



TV Setup Operation

EN 3-8


>><<

ExamplePicture (Continue)Sharpness


Sharpness For lesssharpness

For moresharpness



TV Setup Operation

EN 3-9


>><<

ExamplePicture (Continue)Advanced

C.M.S. (Colour Management System)

Colour tone is managed using the six-colouradjustment setting.C.M.S.-hue: This is a standard to adjust thecolour either more reddish or more bluish intone.

A lower value makes the image darker.

NOTEFor resetting all adjustment items to the

factory preset values, press / to select"Reset Picture", and then press (ENTER).

TV Setup Operation

EN 3-10


>><<



Colour tone is managed using the six-colouradjustment setting.C.M.S.-saturation: Increases or decreasesthe saturation of a selected colour.




TV Setup Operation

EN 3-11


>><<



Colour tone is managed using the six-colouradjustment setting.C.M.S.-value: A higher value makes theimage brighter.




TV Setup Operation

EN 3-12


>><<


Colour temp. (Colour Temperature)

For a better white balance, use colourtemperature correction. High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone



TV Setup Operation

EN 3-13


>><<


Gamma Adjustment

Adjusts the differences of picture tonesbetween bright parts and dark parts. Theadjustment range of the gamma can be set to amaximum of +3 and a minimum of -3 bypressing or .

TV Setup Operation

EN 3-14


>><<


Digital Noise ReductionProduces a clearer video image.Auto: Automatically adjusts the level of noisereduction.

High/Middle/Low: You can select a desiredlevel for viewing a clearer video image.

Off: No adjustment.

NOTE"Digital Noise Reduction" is not available

when PC format is being input.

TV Setup Operation

EN 3-15


>><<


Active ContrastAutomatically adjusts the image contrastaccording to the scene.Advanced: Produces higher contrast image inany scene.

Standard: Produces high contrast image inbright scene.

Off: No adjustment.

TV Setup Operation

EN 3-16


>><<

ExamplePicture (Continue)Reset Picture

Returns Picture Settings to their factory presetvalues. To reset, select "YES" and then press (ENTER).

TV Setup Operation

EN 3-17


>><<

ExampleAudio

Auto Volume

Different sound sources sometimes do nothave the same loudness level, such as aprogramme and its commercial breaks, TheAutomatic Volume Control(Auto Volume)reduces this problem by equalizing.ON: Reduces the loudness gaps amongdifferent sound source. The result isautomatically adjusted according to thesound sources.

OFF: No adjustment.

NOTEThe Audio menu is grayed out when

"Output Select" is set to "Variable". (See page 4-2.)

TV Setup Operation

EN 3-18


>><<

ExampleAudio (Continue)Balance

You can adjust the sound quality to yourpreference with the following settings.Selecteditem button button

Balance Decrease audiofrom the rightspeaker

Decrease audiofrom the leftspeaker


"Output Select" is set to "Variable". (See page 4-2.)For resetting Audio adjustment items to

the factory preset values, press / toselect "Reset Audio", press (ENTER),press / to select "Yes", and then press (ENTER).

TV Setup Operation

EN 3-19


>><<

ExampleAudio (Continue)Equalizer

This function allows you to change the soundquality.Select from the following available settings.Rock/Pop/Live/Dance/Techno/Classic/Soft/Off



TV Setup Operation

EN 3-20


>><<

ExampleAudio (Continue)Surround

The surround function produces Surroundeffect from the speakers.


"Output Select" is set to "Variable". (See page 4-2.)For some discs, setup may be required

on your BD/DVD player. In this case,please refer to the operation manual of yourBD/DVD player.

TV Setup Operation

EN 3-21


>><<

ExampleAudio (Continue)Bass enhancer

This function improves the sound quality.The low range will be extended and the soundsin the medium and high ranges, which havebeen lost due to the data being compressed,will be restored.



TV Setup Operation

EN 3-22


>><<

ExampleAudio (Continue)Wall Mount Setup

This selects the optimal audio for theprogramme you are currently watching evenwhen the TV is mounted to a wall.

TV Setup Operation

EN 3-23


>><<

ExampleAudio (Continue)Audio Description Setting (DTV only)

This function allows you to enable output ofaudio description if the TV receives a signalincluding audio description.

NOTEThe audio description sound is

superimposed on the main audio when youselect a broadcast compatible with audiodescription.This function is available only for DTV

broadcasts. This “Audio DescriptionSetting” menu is not displayed for the ATVor the external inputs.The audio description sound is

superimposed on the main audio only whenthe sound is output on the speaker soundoutput, headphone sound output and soundfor audio out output. The sound is notoutput on the digital audio output and theHDMI sound output.This function is not available for the

AQUOS Audio speaker system.This function does not work during USB-

recording playback.

TV Setup Operation

EN 3-24


>><<

ExampleAudio (Continue)Reset Audio

Returns Audio Settings to their factory presetvalues. To reset, select "YES" and then press (ENTER).NOTE

The Audio menu is grayed out when"Output Select" is set to "Variable". (See page 4-2.)

TV Setup Operation

EN 3-25


>><<

General

Auto instal lation

When the TV is powered on for the first time after purchase, the initial autoinstallation wizard appears. Follow the menus and make the necessarysettings one after another.

Confirm the fol lowing before turning on the powerIs the antenna cable connected?Is the AC cord plugged in?

1 Press POWER on the TV.The initial auto installation wizard appears.

2 Setting the OSD language.x Press / to select the desired language, and then press (ENTER).3 Press / to select your Wi-Fi network.4 Press / to view Google Terms of Service and Google Privacy x Policy.5 Press "YES" or "NO" to allow Google use your device location. 6 Press "YES" or "NO" to set permission for Google to use your TVdiagnosis and usage data. 7 Press / to view Sharp Terms of Use and Sharp Privacy Policy.

8 Selecting the location of the TV.x Press / to select where you will use this TV, and then press x (ENTER).HOME:

Settings are optimised for normal home viewing and energy efficiency.“STANDARD” will be the default value for the “AV mode” setting.

STORE:Settings are designed for maximum impact in retail store displays.“DYNAMIC (Fixed)” will be the default value for the “AV mode” setting.

If the “AV mode” is changed, the TV will automatically switch back to“DYNAMIC (Fixed)” when there is no operation using the TV or remotecontrol unit for 30 minutes.

NOTESTORE: A demonstration image will be displayed after initial auto

installation is completed. If you have chosen “STORE” by mistake, go to“General” > “Factory Reset - TV” > “Yes” > select “HOME” again.

9 Setting the country.x Press / to select your country or area, and then press x (ENTER).

This setting screen only appears during the initial auto installation.

NOTEDigital (DVB-T/T2) broadcasting cannot be viewed in the area where

digital broadcasting is not yet launched.DTV concerned menu may not displayed in some country.

10 Please select / to start TV channel setup.11 Starting Channel Search. Go to "General" > "Channel Search".

TV Setup Operation

EN 3-26


>><<

ExampleGeneral (Continue)Channel Setting

Programme SetupYou can run the auto search procedure again at any time by accessing the “Setup” menu and“Programme setup”. Channels can be tuned automatically or manually.

Digital setting (DTV only)

You can reconfigure the DTV channel settings automatically or manually.

Manual searchAdd new services within a specified frequency band.

Enter the frequency using / buttons.

Channel SkipYou can select the channels to skip.

Analogue settingYou can reconfigure the TV channel settings automatically or manually.

NOTEThe “Analogue setting” menu is available only for watching TV in ATV mode.

TV Setup Operation

EN 3-27


>><<

ExampleGeneral (Continue)Channel Setting

Antenna setup-DIGITALIf you install a DTV antenna for the first time or relocate it, you should adjust the alignment of theantenna to receive a good reception while checking the antenna setup screen.

TV Setup Operation

EN 3-28


>><<

ExampleGeneral (Continue)Individual Setting

Parental Control (DTV only)Used to enable or disable the parental controlfunction. This function will not be selectablefrom the menu if you do not first configure yoursecret number.(Default: 1234)

Rating (Singapore)

General (G): Suitable for all ages.Parental Guidance (PG): Suitable for all, but parentsshould guide their young.

Parental Guidance 13 (PG13): Suitable for persons ages13 and above but parental guidance is advised forchildren below 13.

No Children Under 16 (NC16): Suitable for persons aged16 and above.

Mature (M18): Suitable for persons aged 18 and above.Restricted 21 (R21): Restricted to persons aged 21 andabove.

Rating (Other)This is used in countries other than Singapore.

TV Setup Operation

EN 3-29


>><<


Download SettingSearching for updatesThe TV automatically determines whether anew software version is available when the TVis in standby mode.

Item

YesAutomatically searches for new softwareupdates available when the TV is instandby mode.

No Does not search for update information.

TV Setup Operation

EN 3-30


>><<


Text LanguageIf Teletext information does not displaycorrectly, perform the procedure below.Select from among six kinds of languagetables: West Europe, East Europe,Greek/Turkish, Cyrillic, Arabic and Farsi.Each table is compatible with the Teletextlanguages listed below.

West Europe — English, French,Scandinavian, Turkish, German, Spanish,ItalianEast Europe — Polish, French,

Scandinavian, Czech, German,Slovenian/Croatian, Italian, RumanianGreek/Turkish — English, French,

Scandinavian, Turkish, German, Spanish,Italian, GreekCyrillic — English, Russian, Estonian,

Czech, German, Slovenian/Croatian,Ukrainian, LettishArabic — English, French, Scandinavian,

Turkish, German, Hebrew, Italian, ArabicFarsi — English, French, Scandinavian,

Turkish, German, Hebrew, Italian, Farsi

NOTETeletext can be displayed only when it is

sent by a network. Not used to convertbetween languages.

TV Setup Operation

EN 3-31


>><<


Initial Teletext Page (DTV only)If you set the language of the initial page (thispage is displayed for the first time afterpressing ) for teletext in DTV mode, it willstart from the selected language page.

NOTEThis function is available for teletext in

DTV mode. This is not available for teletextin ATV or external input mode.If the initial teletext page of the selected

language in this function is not included in areceived broadcast, the default initial pagewill be displayed.

TV Setup Operation

EN 3-32


>><<


Digital Audio Language (DTV only)Switching the multi audio languagesSet up to two preferred multi audio languagesto display if the audio languages are available.Each time you press AUDIO on the remotecontrol unit, the audio language switches.

NOTEThis function depends on audio language

information from broadcasters.If audio for the selected language is not

included in a received broadcast, audio willnot be output for that language.

TV Setup Operation

EN 3-33


>><<


Subtitle (DTV only)Set up to two preferred subtitle languages(including subtitles for the hearing impaired) todisplay if subtitles are available.

Selectable i tems1st language2nd languageFor Hearing Impaired

Switching subtitle languagesEach time you press on the remote controlunit, the subtitle switches.

Set “ For Hearing Impaired” to “ Yes”Subtitles for the hearing impaired have priorityover each of the subtitle language settings(e.g., “1st language”, “2nd language”, etc.).

NOTESubtitles will not be displayed when the

programme does not contain subtitleinformation.

TV Setup Operation

EN 3-34


>><<

ExampleGeneral (Continue)AQUOS Remote Control

Set this function when operating the TV fromequipment connected by LAN or wireless LAN. (See page 8-2.)

TV Setup Operation

EN 3-35


>><<

ExampleGeneral (Continue)No signal off

When this function is enabled, the TVautomatically shuts down if no signal isreceived for more than 15 minutes.

NOTEWhen it is 5 minutes before the power

shuts down, the remaining time will start tokeep appearing every minute.When a TV programme finishes, this

function may not operate.

TV Setup Operation

EN 3-36


>><<

ExampleGeneral (Continue)Advanced

Secret No.Allows you to use a secret number to protectcertain settings from being accidentallychanged.

Input Secret No.:Input the Secret No. currently set. (Default: 1234)

Setting Secret No.You can set and change the secret number byusing 0-9.Yes: Change or sets the Secret No.No: The previous screen will be displayed.NOTE

As a precautionary measure, make a noteof your secret number and keep it in afamiliar place.The TV Channel Setup and Parental

Control will not be selectable from the menuif you do not first configure your secretnumber.

TV Setup Operation

EN 3-37


>><<


Programme Title Display (DTV only)This function allows you to display programmeinformation such as the title and airtime bytuning a channel.

NOTEThis function is available only when the

DTV mode is selected.

TV Setup Operation

EN 3-38


>><<


Auto Wide (DTV only)The “Auto wide” allows the TV to switchautomatically among the different picture size.

NOTEUse “Wide mode” if an image does not

switch to the appropriate picture size. Whenthe broadcast signal contains no aspectratio information, the function will not workeven if enabled.

TV Setup Operation

EN 3-39


>><<


CI MenuIn order to receive coded digital stations, acommon interface module (CI module) and aCA card must be inserted in the CI slot of theTV.

1 Carefully insert the CI module in the CI slotwith the contact side forward.

2 The logo on the CI module must be facingoutward from the rear of the TV.

Checking CI module informationThis menu is only available for digital

stations.The content of this menu depends on the

provider of the CI module.ModuleGeneral information on CI module displays.MenuAdjustment parameters of each CA carddisplays.EnquiryYou can input numerical values such aspasswords here.

TV Setup Operation

EN 3-40


>><<


CI Menu (Continue)

NOTECI slot is not available for LC-45LE580X.It takes a few minutes to certify the

licence key when you insert a CA card intothe CI module for the first time. Thisprocess may fail when there is no antennainput or you have never run “Autoinstallation”.The CI module sometimes upgrades its

firmware. You may not receive any TVimages before upgrading. You can only usethe POWER during upgrading.Copy protected content may not be

output or may be output with a copy controlsignal. The protect icon* is displayed whenINFO is pressed while watching copyprotected contents. *Protect icon: If the TV displays an update confirmation

message for the CA card while receiving CIcompatible broadcasts, follow the screenprompts.Make sure that the CI module is properly

inserted.If the old CAM is used, authentication

may fail. In such cases, contact thecontracted service provider.

TV Setup Operation

EN 3-41


>><<


Operation Lock OutThis function locks the operation buttons onthe TV and the remote control.Off: No adjustment.RC Control Lock: All buttons on the remotecontrol are locked.

Button Control Lock: All buttons on the TV,except POWER, are locked.

When "RC Control Lock" or "Button ControlLock" is selected, a confirmation screenappears.Yes: Locks the operation buttons.No: No adjustment.

NOTETo unlock the buttons on the remote

control by using the control panel of the TV.(See the Setup Guide.)

TV Setup Operation

EN 3-42


>><<


TV LocationSelect "Home" or "Store" for the location whereyou plan to install the TV.

NOTENormally set "TV Location" to "HOME".If you set "TV Location" to "Store", you

will not be able to use some menus.

TV Setup Operation

EN 3-43


>><<


Demo (store mode only)You can select the image from several types ofdemo mode.

NOTEWhat kinds of setting item are available

depends on the model of your TV.This function will be canceled when you

press EXIT on the remote control unit."Demo" may not be selected depending

on input signal type or application status."Demo" may be automatically canceled

depending on input signal type.

TV Setup Operation

EN 3-44


>><<

ExampleGeneral (Continue)Factory Reset - TV

If complex adjustments are made and thesettings cannot be restored to normal, you canreset the settings to the factory preset values.

If you have already set the Secret No.,input the 4-digit secret number here.

NOTEThe Language settings will not be

changed.To reset all data, including Google

Accounts, execute "Storage & Reset" fromSettings on the HOME screen.

TV Setup Operation

EN 3-45


>><<

Video InAudio Select

This function sets the terminal to output thecomputer audio.The adjustment items vary depending on theinput source. Select the input sourcecorresponding to the terminal connected to thePC and then adjust the desired item.To perform the operation, refer to "Devices" >"Video in" > "HDMI 3" > "Audio Select".

HDMI 3HDMI(Digital): Select this when the TV andPC are connected using an HDMI-certifiedcable and audio is input via the samecable.

HDMI+Analog: Select this when the TV andPC are connected using a HDMI-certifiedcable and the audio is input via INPUT 5 (L/R).

NOTEWhen "Audio Select" is set to

"HDMI+Analog", sound will not be producedif you use only an HDMI-certified cable toconnect HDMI-compatible equipment. Toproduce sound, you should make an analogaudio connection.If you want to connect HDMI-compatible

equipment using only an HDMI-certifiedcable, set "Audio Select" to "HDMI(Digital)"."Audio Select" can only be set for the

HDMI IN 3.

Devices Operation

EN 4-1


>><<

Audio OutOutput Select

Allows you to select what controls the audiooutput.Fixed: Sound via speaker is adjusted withVOL+/- on the remote control unit or on theTV. Sound via the AUDIO OUT terminal is notadjustable and outputs at a consistentlevel.

Variable: Sound via the AUDIO OUT terminalis adjusted with VOL+/- on the remotecontrol unit or on the TV. Sound via speaker is muted.

Devices Operation

EN 4-2


>><<

Audio Out (Continue)Audio Setup

You can output digital audio to an AV amplifieror similar device whose DIGITAL AUDIOINPUT terminal is connected to the DIGITALAUDIO OUT terminal on the TV. Please selectan audio output format compatible with theaudio format of the programme you arewatching and the equipment connected.PCM: For connecting to equipment that doesnot support Dolby Digital. The same audio(main, sub, or main/sub) as the audio of theprogramme being viewed is output. 2-channel audio with a sampling rate of 48 kHz or less is output as linear PCMaudio.

Bitstream: For connecting to an audiosystem that supports Dolby Digital. Audiois output through both the main and subchannels.

NOTEAnalog channel audio, Video input audio,

PC input audio and HDMI-Analog inputaudio are output in PCM mode even when"Bitstream" is selected.PCM digital input signals are output in

PCM mode even when "Bitstream" isselected.

Devices Operation

EN 4-3


>><<

Audio Out (Continue)Speaker Select

You can select to listen to the TV sound onlyfrom the LINK-compatible audio system.Internal Speaker: The sound is output fromthe TV speaker.

External Devices: The sound from the TVspeaker is muted and only the sound fromthe LINK-compatible audio system isaudible.

You can use VOL+/- and MUTE.

Audio Setup

You can output digital audio to an AV amplifieror similar device whose HDMI terminal isconnected to the HDMI1/ARC terminal on theTV. Please select an audio output formatcompatible with the audio format of theprogramme you are watching and theequipment connected.(See page 4-3.)

Devices Operation

EN 4-4


>><<

Changing ChannelsYou can change channels in several ways.Method 1Using CH / on the remote control unit oron the TV.Method 2Using remote control buttons 0-9.Examples:To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5 (ENTER)To select a 3-digit channel number (e. g.,Channel 115):

Press 1 1 5 (ENTER)

NOTEWhen selecting a 1-digit channel number,

it is not necessary to press 0 before thenumber.When you enter 0-9 only, channel

selection will be made if there is nooperation within a few seconds.If you push "0" by itself, nothing will

happen.Complete the above steps within a few

seconds.

Direct Button Operation

EN 5-1


>><<

Changing VolumeYou can change the volume by pressingVOL+/- on the TV or on the remote control unit.

To increase the volume, press VOL +.To decrease the volume, press VOL -.

Audio status

Output deviceOutput Select

Fixed Variable

TV Speaker Variable Sound Mute

AUDIO OUT Fixed Sound (VolumeMAX) Variable Sound

DIGITAL AUDIO OUT, HDMI IN 1 (ARC)

Fixed Sound (VolumeMAX)

Fixed Sound (VolumeMAX)


EN 5-2


>><<

MUTEMutes the current sound output.Press MUTE.

" " will be displayed on the screen for30 minutes.

NOTEMute can be cancelled by pressing

VOL+/- or MUTE.


EN 5-3


>><<

FLASHBACK

Press (FLASHBACK) to switch to thepreviously tuned channel or previous inputmode.

Press (FLASHBACK) again to switchback to the currently tuned channel.

NOTE

(FLASHBACK) will not work if nochannel has been changed after the TV isturned on.With (FLASHBACK), only input from

TV, HDMI 1 through 4, or Video will bestored in Memory.


EN 5-4


>><<

AUDIO

Switching the digital audio format (DTVonly)

If multi sound modes are received, each timeyou press AUDIO the mode switches.

NOTEThe sound mode screen disappears in six

seconds.Selectable items vary depending on the

received broadcasts.The audio description sound is selected

depending on the main audio.

Switching the analogue audio format

You can switch between multiple audio modeswhen watching a multiple audio or stereobroadcast programme.

In the NICAM TV broadcastsWhen receiving a stereo signalEach time you press AUDIO, the modeswitches between Nicam Stereo and Mono.

When receiving a bil ingual signalEach time you press AUDIO, the modeswitches among Nicam Dual1, Nicam Dual2and Mono.

When receiving a monaural signalEach time you press AUDIO, the modeswitches between Nicam Mono and Mono.

In the TV mode of A2 TV broadcastsWhen receiving a stereo signalEach time you press AUDIO, the modeswitches between Stereo and Mono.

When receiving a bil ingual signalEach time you press AUDIO, the modeswitches among Dual1 and Dual2.

When receiving a monaural signalWhen you press AUDIO, “Mono” displays.


EN 5-5


>><<

Sleep TimerAllows you to set a time when the TVautomatically switches to standby.Press SLEEP.

The remaining time displays when thesleep timer has been set.Each time you press SLEEP, the

remaining time switches as shown below.OFF 30min 60min 90min

120min150min180min

When set, the time automatically startscounting down.If you want to adjust the sleep timer, you

can press SLEEP twice then change thetime setting.When it is 5 minutes before the time

expires, the remaining time will start tokeep appearing every minute.

NOTESelect "Off" by pressing SLEEP to

cancel the sleep timer.The TV will enter standby when the

remaining time reaches 0.


EN 5-6


>><<

VIEW MODEYou can select the screen size.1 Press VIEW.

Current View Mode is displayed.2 Press VIEW while the View Mode indicator is displayed to select a desired item on the menu.

View Mode will toggle within selectable options for the type of video signal currently beingreceived when you press VIEW button.

For HD programmesFull Underscan

Displays with an overscan image. Crops all sides ofscreen.

Displays an image with the same number of pixels on the screenwhen receiving HD signals only.

NOTEWhen using Underscan, it is possible to see noise or bars around different outer portions of the

screen. Please change view mode to correct this.This feature is available with TV, HDMI IN 1-4, and Video input.

Availability in other input modes varies according to the individual App specifications.Some items do not appear depending on the type of received signal.


EN 5-7


>><<

VIEW MODE (Continue)

For 4:3 programmesExample: Screen size images

Normal Full Cinema 16:9

Normal

Keeps the original aspect ratio in a fullscreen display.

For 16:9 squeeze pictures.For 16:9 letterbox pictures. Bars may

appear on the top and bottom with someprogrammes.

Cinema 14:9 Zoom 14:9

For 14:9 letterbox pictures. Bars mayappear on the top and bottom with some

programmes.

For 14:9 letterbox pictures. A thin sidebar appears on each side, and you mayalso see bars on the top and bottom

with some programmes.


EN 5-8


>><<

VIEW MODE (Continue)

For PCExample: Screen size images

Input signal Normal Full Cinema 16:9 Dot by Dot

4:3 Keeps the originalaspect ratio in a fullscreen display.

An image fully fills thescreen.

For viewingwidescreen

programmes. The topand bottom of theimage is cropped.

Detects the resolutionof the signal and

displays an image withthe same number ofpixels on the screen.

Input signal Full Dot by Dot

16:9 An image fully fills thescreen.

Detects the resolutionof the signal and

displays an image withthe same number ofpixels on the screen.

NOTEConnect the PC before making adjustments. See the Setup Guide.Selectable screen size may vary with input signal type.


EN 5-9


>><<

NETFLIXDisplays the NETFLIX screen.Press NETFLIX.

NOTEIf you press the NETFLIX button when

the TV is turned off, the TV turns on andthe NETFLIX screen is displayed.To enjoy Netflix, you need to make:

—a broadband Internet connection (See page 9-1.)

—settings of Internet Setup (See page 9-1.)


EN 5-10


>><<

PreparationYou can connect the TV to a USB memory device, USB hard drive, SD memory card, Home Network server, Smartphone or Tablet to enjoy viewingpictures, listening to music, and watching videos.

NOTESD card slot is not available for LC-45LE580X.Depending on the USB memory device/USB hard drive/SD memory card/Home Network server, the TV may not be able to recognize the recorded

data.It may take time to read the recorded data if the USB memory device/USB hard drive/SD memory card/Home Network server contains many files or

folders.Use only alphanumeric characters for naming files.File names over 80 characters (may vary depending on character set) may not be displayed.

Connecting a USB Memory Device/USB Hard Drive/SD Memory CardInsert the USB memory device or SD memory card with recorded photos, music or videos into the USB 1, USB 2 or SD memory card slot on the TV.

If USB memory devices are inserted into multiple terminals, the USB 1 terminal has priority.

Enjoying Photo/Music/Video Playback

EN 6-1


>><<

Preparation (Continue)When connecting a USB hard drive, be sure to use a hard drive with an AC adapter.Do not remove a USB memory device or SD memory card from the TV while transferring files, using the slide show function, or switching screens, or

before you exit "Content Player".Do not insert and remove a USB memory device/USB hard drive/SD memory card to and from the TV repeatedly.When using a card reader, be sure to insert a USB memory device first.

CAUTIONDo not use a USB extension cable when connecting a USB memory device to the USB terminal on the TV.Using a USB extension cable with the USB memory device may prevent the TV from performing correctly.

Connecting a Home Network ServerConnect the TV to the Home Network server using an ETHERNET cable.

You can also connect a Home Network server by using a wireless LAN.

NOTEDo not disconnect a Home Network server from the TV while transferring files, when a screen is switching to another or before you exit "Content

Player".Do not connect and disconnect a Home Network server from the TV repeatedly.


EN 6-2


>><<

Selecting the Folders to Play BackTo play back data on a USB memory device or SD memory card, insert the USB memory device or

SD memory card on the TV.1 Select "Content Player" from the Devices screen, or launch the Content Player app from HOMEscreen.

2 Press / to select "Photo", "Music" or "Video", and then press (ENTER).Example

3 Press / (or / ) to select the drive/server where you want to find your file, and then press (ENTER).

4 Press / to select the desired folder, and then press (ENTER).


EN 6-3


>><<

Selecting the Folders to Play Back (Continue)NOTE

If the TV is turned off and then on again, the number assigned to the USB may change.

USB Device Compatibi l i ty

USB device USB Memory, USB card reader (MassStorage class), USB hard drive

File system FAT/FAT32

SD memory card Compatibi l i ty

SD card SD/SDHC memory card

File system FAT/FAT32

Photo fi le format

Format JPEG, PNG, BMP

Music fi le format

Format Sampling rate [KHz]

Bitrate [Kbps]

MP3 8/11.025/12/16/ 22.050/24/32/44.1/48

8~320

AAC 32/44.1/48 8~320

WMA 8/11.025/16/22.05/ 32/44.1/48/64/88.2/96

8~384

WAV 8/11.025/12/16/ 22.050/24/32/44.1/48

8~1024


EN 6-4


>><<

Selecting the Folders to Play Back (Continue)

Video fi le format

Container Video Audio

AVIMPEG-1MPEG-2MPEG-4H.264

PCMMP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3

AAC AC3WMA

MKV

MPEG-1MPEG-2MPEG-4H.264 VP8

H.265(HEVC)

PCMMP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3

AAC AC3WMA

VORBIS DTS

ASF MPEG-4VC1(WMV3)

MP3: MPEG-1 Layer3 WMA

PS MPEG-1MPEG-2

MP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3

AC3DTS

TSMPEG-2

VC1(WMV3) H.264

H.265(HEVC)

MP2: MPEG-1 Layer2 AAC AC3DTS

MP4

MPEG-4H.264

H.265(HEVC) VP8

VC1(WMV3)

MP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3

AAC

NOTEProgressive format jpeg files are not

supported.USB 1.1 devices may not be played

properly.Operation using USB hubs is not

guaranteed.Some video file formats may not be

played depending on the file.Some images may not be displayed in

the appropriate aspect ratio depending onthe file format.File extensions are not used to determine

the file format.If you insert any card other than the

SD/SDHC (class 6 or higher), it will notwork.

Home Network Server Compatibi l i ty

Photo fi leformat

JPEG

Music fi leformat

WAV, MP3

Video fi leformat

MPEG2-PS, MPEG2-TS,WMV, ASF, MP4, MOV,AVI

NOTEProgressive format jpeg files are not

supported.Some video file formats may not be

played depending on the file or the server.


EN 6-5


>><<

Playing Back Files on a USB Memory Device/SD Memory Card/Home NetworkServer

Photo Mode

Viewing Thumbnails

Example

Buttons for thumbnail/l ist operationsButtons Description / Select a desired item.

In Thumbnail mode: Select a desired item.In List mode. Return to the previous process.

In Thumbnail mode: Select a desired item.In List mode, when selecting a folder icon: Enter this directory. In List mode, when selecting a photo file: Enlarge the photo.

(ENTER) When selecting a folder icon: Enter this directory.When selecting a photo file: Enlarge the photo.

(Back)In Thumbnail mode: Return to the previous process.In List mode. Exit application.

B (blue) Change Thumbnail/List mode.

Y (yel low) Display the Menu screen.


EN 6-6


>><<

Playing Back Files on a USB Memory Device/SD Memory Card/Home NetworkServer (Continue)

Menu for thumbnail operationsPress / to select an item and make settings to your preferences.

Example

SortYou can change the way in which files are ordered.Press / to select "Type", "Date" or "Name", and then press (ENTER).

Media TypeSwitch the media type when the Recursive Parser display is displayed.

Thumbnail SizeChange the thumbnail size. Small/Medium/Large

Recursive ParserDisplay all files according to the Media Type settings.

NOTEYou can see the file name, file size and pixel size of the selected photo in the upper-left corner of

the screen.When you are viewing the Content Player app, you cannot configure Picture/Audio settings.


EN 6-7


>><<

Playing Back Files on a USBMemory Device/SD MemoryCard/Home Network Server(Continue)

Slide Show

The photos displayed on the thumbnailselection screen are displayed as a slide show.

Buttons for slide show operationButtons Description

Play the Slide Show.

Pause the Slide Show.

/ / / , (ENTER)

Select the desired item.

(Back)Return to the thumbnail selectionscreen.

Y (yellow) Display the USB Menu screen.

Menu for slide showExample

RepeatSet whether to show the slide show repeatedly. None/Repeat One/Repeat All

ShuffleShuffle the image files within the folder anddisplay as a slide show.

DurationSpecify the length of time before the nextimage appears.Press / to select the desired length of thetime, and then press (ENTER). Short/Medium/Long

EffectSpecify the effect for transitioning to the nextimage. None/Dissolve/Wipe right/Wipe left/Wipe up/Wipe down Box in/Box out/Random

Rotate*Rotate the photo by 90 degrees to the right.* Only displayed when playback is paused.

Zoom*Zoom in on the image. Normal/Zoom1/Zoom2* Only displayed when playback is paused.

SortYou can change the way in which files areordered.Press / to select "Type", "Date" or"Name", and then press (ENTER).NOTE

The slide show continues until you press

(Back).For setting the slide show speed, select

"Duration" on the Menu screen.


EN 6-8


>><<

Playing Back Files on a USB Memory Device/SD Memory Card/Home NetworkServer (Continue)Music Mode

Viewing Thumbnails

Example

Buttons for thumbnail/l ist operationsButtons Description

/ Select a desired item.


In Thumbnail mode:Select a desired item.In List mode, when selecting a folder icon: Enter this directory. In List mode, when selecting a music file: Play music.

(ENTER) When selecting a folder icon: Enter this directory. When selecting a music file: Play music.



Y (yel low) Display the MENU screen.

NOTEWhen you are viewing the Content Player app, you cannot configure Picture/Audio settings.


EN 6-9


>><<


Menu for thumbnail operationsExample

SortYou can change the way in which files are ordered. Press / to select "Date", "Genre", "Artist" or "Album", and then press (ENTER).

Media TypeSwitch the media type when the Recursive Parser display is displayed.




EN 6-10


>><<


Playing Mode

Buttons for playing modeButtons Description

The fast reverse speed changesevery time you press .

The fast forward speed changesevery time you press .

Pause the music.

Go to the previous file.

Go to the next file.

/ / / , (ENTER)

Select a desired item.

(Back)Return to the previous process.

Y (yellow) Display the Menu screen.

NOTEThe displayed play time may differ

slightly from the actual play time dependingon the files.

Menu for playing modeExample

RepeatConfigure the repeat playback settings. None/Repeat One/Repeat All

ShuffleShuffle the music within the folder.

Hide Spectrum/Show SpectrumShow or hide the spectrum.

LyricYou can change the lyric display type. This is only available when a lyrics file (".lrc")is present.Only UTF-8 character code lyric files (withoutBOM) are supported.


EN 6-11


>><<

Playing Back Files on a USB Memory Device/SD Memory Card/Home NetworkServer (Continue)Video Mode

Viewing Thumbnails

Example

Buttons for thumbnail/l ist operationsButtons Description / Select a desired item.


In Thumbnail mode: Select a desired item.In List mode, when selecting a folder icon: Enter this directory. In List mode, when selecting a video file: Play the video file.

(ENTER) When selecting a folder icon: Enter this directory. When selecting a video file: Play the video file.



Y (yel low) Display the Menu screen.


EN 6-12


>><<


Menu for thumbnail operationsExample

SortYou can change the way in which files are ordered.Press / to select "Type", "Date" or "Name", and then press (ENTER).

Media Type Switch the media type when the Recursive Parser display is displayed.



NOTEWhen you are viewing the Content Player app, you cannot configure Picture/Audio settings.


EN 6-13


>><<


Playing Mode

Buttons for playing modeButtons Description

The fast reverse speed changesevery time you press .

Play the video

The fast forward speed changesevery time you press .

Pause the video.

Go to the previous file.

Stop the video.

Go to the next file.

/ / / , (ENTER)

Select a desired item.

(Back)Return to the previous process.

Y (yellow) Display the Menu screen.

Menu for playing modeExample

RepeatConfigure the repeat playback settings. None/Repeat One/Repeat All

Screen ModeSet the screen size. Auto/Original


EN 6-14


>><<

Playing Back Files from a Portable DeviceWith the remote playback function, you can use your portable device to play back pictures, video, andmusic on the Home Network server.

Preparation

Use Wi-Fi to connect the smartphone or tablet to the TV.

NOTEA wireless access point is required to use a portable device.


EN 6-15


>><<

Playing Back Files from a Portable Device (Continue)1 Select "Content Player" from the Devices screen, or launch the Content Player app from HOMEscreen.

2 Press / to select "Remote play" icon, and then (ENTER).

3 While the TV is in standby mode, send photos/music/video from the smartphone, tablet, or similardevice to the TV.To use the remote playback function, your portable device must be a DLNA Certified Digital Media

Controller.

NOTEThis function will only start when the standby screen of Remote play is displayed after you launch

the Content Player app from the HOME screen.This function may not work while an Internet application is being used.For information on the compatible formats, see "Home Network Server Compatibility" on page 6-5.Some Digital Media Controllers and Remote play applications are not supported. In this situation,

regardless of whether the file can be played back, the message "Playback not possible" may bedisplayed, and playback may be stopped.


EN 6-16


>><<

Controlling HDMI Equipment Using LINK OperationWhat’s LINK Operation?

Using the HDMI CEC (Consumer Electronics Control) protocol, withLINK Operation you can interactively operate compatible systemequipment (Blu-ray disc equipment, AV amplifier, DVD).By connecting LINK-compatible devices with HDMI-certified cables to

the TV, you can control a recorder or AV amplifier using the remotecontrol of the TV.LINK Operation allows you to operate the HDMI-connected equipment

with one remote control.

NOTEFor connecting the TV to LINK-compatible equipment, use

commercially available cables.Point the remote control toward the TV, not to connected HDMI

equipment.Video noise may occur depending on the type of HDMI cable used.

Make sure to use an HDMI-certified cable.Up to 3 pieces of HDMI recording equipment and one AV amplifier can

be connected using this system.

NOTEIf the equipment does not operate, turn on the equipment and select the

appropriate input source using DEVICES.The LINK feature may not operate properly when an HDMI splitter or AV

selector unit is used. These devices may cause interruptions to theimage and/or sound.

Connected LINK-compatible devices can be operated without changing thesettings of the remote control unit.

One Touch PlayWhile the TV is in standby mode, it automatically turns on and plays backthe image from the HDMI source.

Single remote controlThe LINK Operation automatically recognizes the connected HDMI deviceand you can control the TV and the devices as if using a universal remotecontrol.

Control the LINK-compatible audio systemSet the volume of LINK-compatible audio system.

NOTEThe above description is an example of the LINK Operation function.Refer to this operation manual and the operation manual of the LINK-

compatible device to be used with this TV.

Using LINK Operation

EN 7-1


>><<

Controlling HDMI Equipment UsingLINK Operation (Continue)One Touch Playback

LINK Operation allows you to operate theHDMI-connected equipment with one remotecontrol.Press to start playing back a title.

The last played program is played back.You can use the following buttons duringbroadcast viewing.Buttons Description

SOURCE Turns the power of the HDMIconnected devices on and off.

Hold down this button to go inreverse.

Starts playback.

Hold down this button to fastforward.

Stops playback.

Sets pauses and still pictures.

Pressing quickly once takes you tothe start of the chapter currentlyplaying. Each time you press it, youmove back to the start of theprevious chapter.

Pressing quickly once takes you tothe start of the next chapter. Eachtime you press it, you move aheadto the start of the next chapter.

Using LINK Operation

EN 7-2


>><<

Setting Audio InputAudio Select HDMI

This function sets the terminal to output the computer audio.The adjustment items vary depending on the input source. Select the inputsource corresponding to the terminal connected to the PC and then adjustthe desired item.To perform the operation, refer to "Devices" > "Video in" > "HDMI 3" >"Audio Select".

HDMI 3HDMI(Digital): Select this when the TV and PC are connected using anHDMI-certified cable and audio is input via the same cable.

HDMI+Analog: Select this when the TV and PC are connected using aHDMI-certified cable and the audio is input via INPUT 5 (L/R).

NOTEWhen "Audio Select" is set to "HDMI+Analog", sound will not be

produced if you use only an HDMI-certified cable to connect HDMI-compatible equipment. To produce sound, you should make an analogaudio connection.If you want to connect HDMI-compatible equipment using only an

HDMI-certified cable, set "Audio Select" to "HDMI(Digital)"."Audio Select" can only be set for the HDMI IN 3.

Using a PC

EN 8-1


>><<

PC Compatibility ChartIt is necessary to set the PC correctly to display XGA and WXGA signal.

Resolution HorizontalFrequency

VerticalFrequency VESA Standard

VGA

720 x 400 31.5 kHz 70 Hz ―

640 x 480

31.5 kHz 60 Hz

37.9 kHz 72 Hz

37.5 kHz 75 Hz

SVGA 800 x 600

35.1 kHz 56 Hz

37.9 kHz 60 Hz

48.1 kHz 72 Hz

46.9 kHz 75 Hz

XGA 1024 x 768

48.4 kHz 60 Hz

56.5 kHz 70 Hz

60.0 kHz 75 Hz

WXGA 1360 x 768 47.7 kHz 60 Hz

SXGA 1280 x 1024 64.0 kHz 60 Hz

SXGA+ 1400 x 1050 65.3 kHz 60 Hz

1080p 1920 x 1080 67.5 kHz 60 Hz ―VGA and XGA are registered trademarks of International Business Machines Corp.

Using a PC

EN 8-2


>><<

Connecting to the InternetBy connecting your TV to a broadband system, you can access the Internet from the TV.

You can enjoy a variety of streaming content and Internet applications.It is necessary to configure the network settings in order to enjoy streaming content and internet applications.

These settings can be configured from "HOME" > "Settings" > "Device" > "Network".

NOTETo connect your TV to the Internet, you must have a broadband Internet connection.If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your Internet service provider or telephone

company.When an Internet connection is made, an Ethernet and wireless connection cannot be used at the same time. Use only one of the connection types.

Using an ETHERNET cableUse an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your broadband router (commercially available).

Using the wireless LANThis TV is equipped with a wireless LAN function.For a wireless LAN connection, you must use wireless setup to connect the access point and TV.

Using the Internet

EN 9-1


>><<

Connecting to the Internet (Continue)NOTE

This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply withregulations on radio communications. Therefore, do not use a separate wireless LAN adapter.A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the wireless LAN signal

may be poor or drop, or the connection speed may become slower. - When used in buildings made with concrete, reinforced steel, or metal - When placed near objects that obstruct the signal - When used with other wireless devices that emit the same frequency - When used in the vicinity of microwave ovens and other devices that emit a magnetic field, electrostatic charge, or electromagnetic interferenceWhen there is significant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2.4-GHz cordless

telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that supports IEEE802.11ac (5 GHz) and set theaccess point to transmit at 5 GHz. For setup details, see the operation manual of your access point.Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certification.A wireless LAN router/access point is required to connect the TV to the Internet using a wireless LAN. See the operation manual of your access point

for setup.If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a connection. In this case,

disable the stealth mode on the access point.A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed is unstable.Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings.Please follow the legislation in your country when using the wireless LAN outdoors.If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, press EXIT to exit from the

connected TV feature to make changes to the network settings.If you still cannot connect to the Internet, please consult your Internet service provider or telephone company.You cannot configure the settings from "HOME" > "Settings" > "Device" > "Network" while using an application. If you must configure your "Network"

settings, press the EXIT key to exit the function.

Using the Internet

EN 9-2


>><<

Using Keyboard and MouseYou can use a keyboard or mouse for operatingthe TV when using applications.

When you use the USB devices, connectthe device to the USB terminal on the TV.When you use the bluetooth device, make

necessary settings with "Bluetooth".

NOTEThe keyboard or mouse may not operate

properly depending on the application beingused.The bluetooth device may not operate

properly depending on the device beingused.

Using the Internet

EN 9-3


>><<

Notes

DISCLAIMERSThis SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device

belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with anyauthorization or terms of use provided by such content or service provider. SHARP shall not be liable to you or any third party for your failure to abide bysuch authorization or terms of use. Unless otherwise specifically authorized by the applicable content or service provider, all third party content andservices provided are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display, perform, reproduce, upload, publish,license, create derivative works from, transfer or sell in any manner or medium any content or services available via this device.SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or services. Any questions, comments or

service-related inquiries relating to the third party content or service should be made directly to the applicable content or service provider. You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself, including, butnot limited to, power failure, other Internet connection, or failure to configure your device properly. SHARP, its directors, officers, employees, agents,contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause orwhether or not it could have been avoided.ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN "AS-IS" AND "AS AVAILABLE"

BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS ORIMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULARPURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, TITLE, USEFULNESS, LACK OFNEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THATTHE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS.SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR

SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY PROVIDERS.IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT,NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVEBEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Using the Internet

EN 9-4


>><<

TroubleshootingProblem Possible SolutionNo power Check if you pressed POWER on the remote control unit.

Is the AC cord disconnected?Has the power been turned on?

Unit cannotbe operated.

External influences such as lightning, static electricity, may causeimproper operation. In this case, operate the unit after first turning off thepower of the TV or unplugging the AC cord and replugging it in after 1 or2 minutes.

Remotecontrol unitdoes notoperate.

Is the equipment to be operated by the remote control unit setcorrectly? Press TV to set the remote control unit to the setting foroperating the TV.Are batteries inserted with polarity (+, -) aligned?Are batteries worn out? (Replace with new batteries.)Are you using it under strong or fluorescent lighting?Is a fluorescent light illuminated near the remote control sensor?Is "RC Control Lock" selected in "Operation Lock Out"?

Page 3-42

Picture is cutoff/with sidebarscreen.

Are screen mode adjustments such as picture size made correctly? Pages 5-7 to 5-9

Strangecolour, lightcolour, orcolourmisalignment

Adjust the picture tone.Pages 3-2 to 3-17Is the room too bright? The picture may look dark in a room that is too

bright.

Power issuddenlyturned off.

Is the sleep timer set?Pages 5-6Check the power control settings.

Page 2-4The unit's internal temperature has increased. Remove any objects

blocking vent or clean.

Problem Possible SolutionNo picture Is connection to other components correct?

If the PC image is not displayed, check the following:- When connecting a laptop PC to the TV, check that display outputmode of the PC is set to external monitor.

Picture qualityof HD programs ispoor.

To enjoy HD images from external equipment, you are required to setup HDMI connection or component connection.If the program content is not of HD quality, HD images cannot be

displayed. Check that the program you are viewing provides HDimages.The HD cable/satellite set-top box may need to be configured to

output HD images via cable/satellite.The cable/satellite broadcast may not support a signal resolution of

1080p.

The TVsometimes makesa cracking sound.

This is not a malfunction. This happens when the cabinet slightlyexpands and contracts according to change in temperature. This doesnot affect the TV's performance.

Appendix

EN 10-1


>><<

Troubleshooting (Continue)Problem Possible Solution

No sound Is connection to other components correct?Is the volume too low?

Page 5-2Is "Variable" selected in "Output Select"?

Page 4-2Have you pressed MUTE on the remote control unit?

Page 5-3Check the audio output of the connected external equipment.

Is the volume too low or muted?When external equipment is connected via an HDMI cable,

you may need to configure the audio to be output through theHDMI cable.When audio is not output from external equipment connected

to the HDMI IN 3 terminal, check the "Audio Select" setting. Page 8-1Even when external equipment is connected using an HDMI-

certified cable, an audio cable connection may be requireddepending on the type of equipment and the media beingplayed back. In this case, in addition to connecting an HDMI-certified cable to the HDMI IN 3 terminal, connect a cable to theINPUT 5 (L/R) terminal and set "Audio Select" to"HDMI+Analog". Page 8-1When connecting a PC via an HDMI-certified cable, check the

following:- Is the audio output of the PC configured correctly? Check theaudio output settings and output audio format in SoundProperties on the PC.The audio formats compatible with this TV are PCM, DolbyDigital. With other formats, audio cannot be output.- Depending on the board, only video signals may be output. Inthis case, in addition to connecting an HDMI-certified cable to theHDMI IN 3 terminal, connect a cable to the INPUT 5 (L/R)terminal and set "Audio Select" to "HDMI+Analog". Page 8-1

Problem Possible SolutionGoogle Cast image/

audio cannot be outputto the TV.

Check pairing.

Appendix

EN 10-2


>><<

Troubleshooting Error MessageThe example of anerror messagedisplayed on a

screen

Possible Solution

No broadcast now. Check the antenna cable. Check that the antenna is correctlysetup.Check the broadcast time in the program guide.

An incompatible audiosignal has beenreceived. Check theoutput device settings.

This message is displayed when an audio format other thanPCM, Dolby Digital is input.- Set the audio output format of connected external HDMIequipment to PCM, Dolby Digital.- Refer to the operation manual of the external equipment forsetting details.

Appendix

EN 10-3


>><<

Information on the Software License for This ProductSoftware License

You can read the software licenses in the on-screen display menu. Refer to"HOME" > "Settings" > "Devices" > "About" > "Legal information" > "Opensource licenses" .

Software compositionThe software included in this product is comprised of various softwarecomponents whose individual copyrights are held by SHARP or by thirdparties.

Cautions regarding use in high and low temperature environmentsWhen the unit is used in a low temperature space (e.g. room, office),

the picture may leave trails or appear slightly delayed. This is not amalfunction, and the unit will recover when the temperature returns tonormal.Do not leave the unit in a hot or cold location. Also, do not leave the

unit in a location exposed to direct sunlight or near a heater, as this maycause the cabinet to deform and the front panel to malfunction. Storage temperature: -20°C to +60°C

Appendix

EN 10-4


>><<

Google, Google Cast, Android and Android TV are trademarksof Google Inc.

Manufactured under license from Dolby Laboratories. Dolby,Dolby Audio, and the double-D symbol are trademarks of DolbyLaboratories.

The terms HDMI and HDMI High-Definition MultimediaInterface, and the HDMI Logo are trademarks or registeredtrademarks of HDMI Licensing, LLC in the United States andother countries.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-FiAlliance.The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi

Alliance.

SDHC Logo is a trademark of SD-3C, LLC.

The Bluetooth® word mark and logos are registered trademarksowned by Bluetooth SIG, Inc. and any use of such marks bySHARP Corporation is under license. Other trademarks and tradenames are those of their respective owners.

For DTS patents, see http://patents.dts.com. Manufacturedunder license from DTS Licensing Limited. DTS, the Symbol, &DTS and the Symbol together are registered trademarks, andDTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. AllRights Reserved.

Trademarks

EN 11-1


>><<

TVItem Model: LC-45LE580X Model: LC-50LE580X Model: LC-60LE580X

LCD panel 113 cm 126 cm 153 cmResolution 2,073,600 pixels (1920 x 1080)Video colour system PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60

TV Function

TV-standardAnalogue PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: MDigital DVB-T / DVB-T2

ReceivingChannel

VHF/UHF 44.25—863.25 MHzCATV S1—S41 ch (including Hyperband)

TV-tuning system Auto Preset 99 chSTEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G MTS: M

Audio amplifier 10 W x 2

Terminals

ANT (Antenna input) UHF/VHF 75 Ω DIN typeSERVICE ONLY Ø 3.5 mm jackINPUT 1 (ARC) HDMI HDMI (HDMI input), ARCINPUT 2 HDMI HDMI (HDMI input)INPUT 3 HDMI HDMI (HDMI input)INPUT 4 HDMI HDMI (HDMI input)INPUT 5 AUDIO in, VIDEO inUSB 1 USBUSB 2 (HDD) USBSD/SDHC - SD/SDHC memory card*1

ETHERNET (10/100 BASE-T) Network connectorDIGITAL AUDIO OUTPUT Optical S/PDIF digital audio outputOUTPUT Ø 3.5 mm stereo jack (audio output)C.I. (Common Interface) - EN50221, R206001, CI specification

OSD language English (UK)/English (US)/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/ Vietnamese/IndonesiaPower Requirement AC 110 — 240 V, 50/60 HzPower Consumption 107W (0.6W Standby) 85W (0.4W Standby) 147W (0.5W Standby)

Dimensionswithout stand 1020 (W) x 593 (H) x 84 (D) mm 1123 (W) x 656 (H) x 82 (D) mm 1355 (W) x 791 (H) x 86 (D) mmwith stand 1020 (W) x 616 (H) x 255 (D) mm 1123 (W) x 687 (H) x 255 (D) mm 1355 (W) x 823 (H) x 303 (D) mm

Weight without stand (with stand) 12kg (13kg) 20kg (21kg) 23.5kg (25kg)Operating temperature 0°C to +40°C

*1 If you insert any card other than the SD/SDHC (class 6 or higher), it will not work.As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification

figures indicated are nominal values of production units. There may be some deviations from these values in individual units.Specification may differ depending on the selected country.

CAUTIONInstalling the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP

bears no responsibility for improper mounting or mounting that results in accident or injury.Carefully read the instructions that come with the bracket before beginning work.

Specifications

EN 12-1


>><<

Wireless LANSpecification

Standard IEEE 802.11a/b/g/n/ac

SecurityStatic WEP (64/128 bit kry index 1 only)WPA-PSK (TKIP) WPA2-PSK (AES)

Modulation

IEEE802.11b: DBPSK, DQPSK, CCK / DSSS HRDSSS IEEE802.11a: BPSK, QPSK, 16QAM, DBPSK, DQPSK, CCK / OFDM IEEE802.11g: BPSK, QPSK, 16QAM, DBPSK, DQPSK, CCK, PBCC / OFDM IEEE802.11n: BPSK, QPSK, 16QAM, 64QAM / OFDM IEEE802.11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM / OFDM

Throughput

IEEE802.11b: 1, 2.5, 5, 11Mbps IEEE802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps IEEE802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps IEEE802.11n: ～300Mbps IEEE802.11ac: ～866.6Mbps

Specifications

EN 12-2


>><<

LC-45LE580XUnit: mm

Dimensional Drawings

EN 13-1


>><<

LC-50LE580XUnit: mm


EN 13-2


>><<

LC-60LE580XUnit: mm


EN 13-3


>><<


<<

Documents

>> LED BACKLIGHT TV OPERATION MANUAL EXIT€¦ · Daydream Daydream: Configure the Daydream (screensaver) settings. When to daydream: Set how many minutes from now to start the Daydream