8/6/2019 MTH

1/7

The TO AND FRO type door is destined for the separationof work rooms with a heavy traff ic of people or trolleys.

It is composed of 1 or 2 doors blades insulated withpolyurethan foam 40 mm thick, with a porthole, the hinges

have a 90 door stop.

It can be constructed with the STANDARD covering orstainless steel and fiber glass reinforced plastic with stainlesssteel guards on the swing edge, flat or aeroplane wing typeaccordingly to the Customers requirements.

Battente in polietilene di spessore mm 15

The TO AND FRO type door is destined for the separationof work rooms with a heavy traff ic of people or trolleys.

It is composed of 1 or 2 doors blades insulated with

polyurethan foam 40 mm thick, with a porthole, the hingeshave a 90 door stop.

It can be constructed with the STANDARD covering orstainless steel and fiber glass reinforced plastic with stainlesssteel guards on the swing edge, flat or aeroplane wing typeaccordingly to the Customers requirements.

Battente isolato con poliuretano iniettato

di spessore mm 40

8/6/2019 MTH

2/7

The OFFICE-STYLE door can be used for machine rooms,offices, toilets.

It consists in a 40 mm injected polyurethane insulation thickdoor, and in aluminium frame.

The hinges are in aluminium, while the handle is made of

plastic material. A door lock is provided or, on request, afree/ engaged lock is provided.

Battente isolato con poliuretano iniettatodi spessore mm 40

The TO AND FRO type door is destined for the separationof work rooms with a heavy traff ic of people or trolleys.

It can be with single or double wing 40 mm thick injectedpolyurethane foam thick insulation, with oval porthole.

The hinges are a kind of vertical steering column operated bytwo springs located in the upper and in the lower portion of

each blade.

The frame can be done in our STANDARD or stainless steel

covering.

The blade is equipped by flexible PVC protections available indifferent height from 150 up to 1000 mm in accordance to

the client request.

Battente isolato con poliuretano iniettato

di spessore mm 40

8/6/2019 MTH

3/7

Hinged door with passage for slide guide track of largedimensions.

Provided with buffer-type monolithic wing with injectedpolyurethan foam insulation, the mod. GV/5 door is

particularly suitable for slaughterhouses and meat processingfactories.

The wing door is normally produced, unless otherwiserequested, with handles, equiped with a push safety device

from inside.

The upper opening is provided with rubber flaps to allow thepassage of tracks even of large dimensions.

Battente isolato con poliuretano iniettatodi spessore mm 68

The new "240AM" model has been developed for middlesized doors (up to 150 cm. X 250 cm. (H)) and it adopts the

following innovations:

- rear guide in the door blade, reducing the encumbrance of

the same on both the floor and the panel;

- new inner prehensile handle;

- new outer fixed handle.

This model can be delivered in the stainless steel type too.

Battente isolato con poliuretano iniettatodi spessore mm 68

8/6/2019 MTH

4/7

Exceptionally sturdy door because it has the presentcomponents of the 480 S but with modified pulley to allowconnection from the panel to the cell.

Battente isolato con poliuretano iniettatodi spessore mm 68

The sliding door suitable for cold storage rooms.

Simple, functional, efficient for thermal range up to 30 C.

Composed by 3 elements only. It can be easly installed on

any type of wall.

The door can be supplied in the following versions:- Standard type with plastified metal sheet covering.- With stainless steel covering.- With stainless steel and fiber glass reinforced plastic

covering.

Battente isolato con poliuretano iniettatodi spessore mm 68

8/6/2019 MTH

5/7

Hinged door for cold storage room with normal temperatureat 0 C.

This model, with buffer-type monolithic wing, with injectedpolyurethan foam insulation is produced now with a new

type of ergonomic hinge and handle projected in conformitywith safety and sanitary regulations in force.

It is equiped with a push safety device for emergencyopening from inside.

The handle is assembled without keylock, supplied onrequest.

The floor level version (S/2) - (S/3) is constructed withhinges provided with helical ramps.

The door mod. 500, in the step version (S/1), is reversible upto a free passage span of cm 100 X 200.

Anti-panic bar supplied on request.

Battente isolato con poliuretano iniettatodi spessore mm 68

Hinged door for low temperature cold storage rooms suitablyinsulated for thermal ranges up to 40 C.

Composed of one buffer-type monolithic wing, with injectedpolyurethan foam insulation, the mod. 603 LWT door isprovided with electric heating cable in the door blade gasket.

This system permits simple and economical elimination ofpossible frost and ice formations on the wings.

Battente isolato con poliuretano iniettatodi spessore mm 90

8/6/2019 MTH

6/7

The sliding door suitable for all type of cold storage units.

Simple, functional, efficient for thermal range up 0 C to 30C.

Composed of three elements only, can be easily installed onany type of wall.

The door can be supplied in the following versions:- Standard type with plastified metal sheet covering.- With stainless steel covering.- With stainless steel and fiber glass reinforced plastic cove-ring.

Automation

Battente isolato con poliuretano iniettatodi spessore mm 90

With electrical fastening pointsHinged door for low temperature cold storage room suitablyinsulated for thermal ranges up to 60 C.

Composed of a strong buffer-type monolithic door blade withinjected polyurethan foam insulation, the mod. 740 LWTdoor is provided with electric heating cable in the doorframe.

This system permits simple and economical elimination ofpossible frost or ice formations on the doors blades.

All the 740 LWT examples are equipped with double flexiblerubber strips for low temperatures.

The handle is connected with 2 external fastening pointswhich, failing the power, do not work any more.

Battente isolato con poliuretano iniettato

di spessore mm 121

8/6/2019 MTH

7/7

The sliding door is suitable for all types of cold storage units.

Simple, functional, efficient for thermal ranges up to 60 C.

Composed of only three elements, can be easily installed onany type of wall.

The door can be supplied in the following versions:

- standard type with plastic covered sheet metal.

- with stainless steel covering.

- with stainless steel and fiber glass reinforced plasticcovering.

Automation

Battente isolato con poliuretano iniettatodi spessore mm 120