バルブ Wings Corporation .The American Society of Mechanical Engineers,. ... ASME Sec.VIII, Div.1. ... UT MANDATORY APPENDIX 7 of ASME Sec.VIII,

  • View
    215

  • Download
    1

Embed Size (px)

Text of バルブ Wings Corporation .The American Society of Mechanical Engineers,. ... ASME Sec.VIII,...

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 44 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    (NON-DESTRUCTIVE INSPECTION / NDI)

    JIS G0202

    (RT)(PT)

    (MT)(UT)

    (SM)(LT)

    (SM) JIS (LT)

    JIS

    RT

    MT

    or

    PT

    UT

    JPI-7S-39-2003

    Body/Bonnet/Cover

    CLASS

    1-1 1-2

    RT()

    RT

    MTorPT()

    MTorPT()

    CLASS

    RT()

    JIS G0581 2

    BW JIS G0581 1

    RT

    JIS Z3104/Z3106 2

    JIS Z3050 B

    MTorPT()

    MTorPT()

    JIS Z3050 B

    RTJ,

    PS ,

    ASME B16.34-2004

    The American Society

    of Mechanical

    Engineers,.

    Valves-Flanged,

    Threaded, and Welding

    Body/Bonnet/Cover

    SPECIAL CLASS

    RT() MANDATORY APPENDIX I

    RT/PT/MT ASME Sec.VIII, Div.1.

    1.0

    UT MANDATORY APPENDIX

    IV

    MT() MANDATORY APPENDIX

    II

    PT() MANDATORY APPENDIX

    III

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 45 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    RT

    MT

    or

    PT

    UT

    MANDATORY

    APPENDIX 7 of

    ASME Sec.VIII, Div.1,

    PRESSURE VESSELS

    EXAMINATION OF STEEL CASTINGS

    RT;

    ASTM E446/E186/E28/E280

    MT;

    ASTM E125TYPE

    PT;

    BS 5998-1983

    Quality levels for steel

    valve castings,

    British Standards

    Institute

    Body/Bonnet/Cover

    Quality Level

    RT; ASTM E446/E186/E28/E280

    MT;

    ASTM E125-1965,

    Type1,Degree2

    PT;

    ASTM E125-1963,

    Type1,Degree2 MSS SP-53-1999

    Magnetic Particle

    Examination Method,

    Manufactures

    Standardization

    Society of the Valve

    and Fittings Industry,

    Inc.

    Body/Bonnet/Cover

    MT

    MSS SP-54-1999

    Radiographic

    Examination Method,

    Manufactures

    Standardization

    Society of the Valve

    and Fittings Industry,

    Inc

    Body/Bonnet/Cover

    ASTM E446/E186/E28/E280

    RT

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 46 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    JPI-7S-39-2003

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 47 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 48 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    RT

    ASTM E446: 50mm

    B16.34 APPENDIX 7

    BS 5998*-1

    MSS SP-54 QL-III QL-I&II

    Gas A2 A2 A3 A2 A2

    Sand B3 B3 B3 B2 B3

    Shrink, Type 1 CA2 CA3 CA4 CA3 CA2

    Shrink, Type 2 CB3 CB3 CB4 CA3 CB3

    Shrink, Type 3 CC3 CC3 CC4 CC2 CC3

    Shrink, Type 4 CD3 CD3 CD4 CD2 CD3

    Hot tears and cracks None None None None

    Insert (Chills, Chaplets) None None None None

    *-1 BW Ends Level-2Hot tears, cracks and Insert

    ASTM E186: 50mm 115mm

    B16.34 APPENDIX 7

    BS 5998*-1

    MSS SP-54 QL-III QL-I&

    II

    Gas A3 A2 A3 A2 A3

    Sand B3 B2 B3 B2 B3

    Shrink, Type 1 CA3 CA1 CA4 CA3 CA3

    Shrink, Type 2 CB3 CB2 CB4 CB3 CB3

    Shrink, Type 3 CC3 CC3 CC4 CC2 CC3

    Hot tears and cracks None None None None

    Insert (Chills, Chaplets) None None None None

    *-1 BW Ends Level-2Hot tears, cracks and Insert

    ASTM E280: 115mm 305mm

    B16.34 APPENDIX 7

    BS 5998*-1

    MSS SP-54 QL-III QL-I&

    II

    Gas A3 A2 A3 A2 A3

    Sand B3 B2 B3 B2 B3

    Shrink, Type 1 CA3 CA2 CA4 CA3 CA3

    Shrink, Type 2 CB3 CB2 CB4 CB3 CB3

    Shrink, Type 3 CC3 CC2 CC4 CC2 CC3

    Hot tears and cracks None None None None

    Insert (Chills, Chaplets) None None None None

    *-1 BW Ends Level-2Hot tears, cracks and Insert

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 49 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    4.1 (Radiographic Examination)

    X (Ir192 or Co60)

    (1)

    JPI-7S-39-2003

    70mm

    BW 1.5

    50mm

    BW BS 5998-1983

    Globe Valve

    ASME B16.34 JPI-7S-39-2003

    1)

    2)

    3) BW 70mm

    4)

    5) Check Valve Cover Flat

    MSS SP-54-1999 BS 5998-1983 critical areas

    (a) casting solidification; (b) stress concentration;

    (c) ability to contain pressure.

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 50 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    APPENDIX 7 (EXAMINATION OF STEEL CASTINGS) of ASME Sec.VIII, Div.1.critical

    sections For static castings, the sections where imperfections are usually encountered are abrupt changes in section and at the junctions of risers, gates, or feeders to the casting. For centrifugal castings, critical sections shall be interpreted to be any abrupt changes of section, the circumference for a distance of at least 3 in.

    from each end, and one additional circumferential band at least 3 in. wide and including the area of the most severe indication detected by other examination method.

    APPENDIX 7

    (Riser)(Gate)(Feeder) RT

    (Centrifugal Castings)

    BODY

    risers, gates, and feeders risers, gates, and feeders

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 51 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    ASTM E1030 (Radiographic Examination

    of Metallic Castings)

    Shooting

    Sketches

    Shooting Sketches

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 52 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    Shooting Sketches

    (2)

    JIS G0581 JIS Z3050 JIS Z3104 JIS Z3106 MANDATORY APPENDIX I (ASME B16.34)

    RADIOGRAPHIC EXAMINATION: PROCEDURE AND ACCEPTANCE STANDARDS

    ASTM E94 Radiographic Examination

    Article 2 (ASME Sec. V)

    Radiographic Examination

    ISO, BS, EN, DIN

    (Image Quality Indicator/IQI),

    (Photographic Density).

    (3)

    JIS ASTM E446/E186/E280

    JIG G0581 ASTM

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 53 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    (4)

    a)

    b)

    c)

    d)

    e)

    f)

    g)

    h)

    i)

    j)

    k)

    l)

    m)

    n)

    o)

    p)

    q)

    r)

    s)

    Shooting Sketches

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 54 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    ASTM E446 (Steel Castings Up to 2 in. [51mm] in Thickness

    Gas PorosityLevel A3 Sand InclusionLevel B3

    ShrinkageLevel CA3 ShrinkageLevel CB3

    ShrinkageLevel CC3 Shrinkage Level CD3

    URL http://www.ndt-ed.org/EducationResources/CommunityCollege/Radiography/TechCalibrations/RadiographInterp.htm

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jphttp://www.ndt-ed.org/EducationResources/CommunityCollege/Radiography/TechCalibrations/RadiographInterp.htmhttp://www.ndt-ed.org/EducationResources/CommunityCollege/Radiography/TechCalibrations/RadiographInterp.htm

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001

    Sheet 55 / 138

    Rev. No. : 0c1 Title: http://wingshome.co.jp/introduction.html

    e-mail: info@wingshome.co.jp

    RT

    (1)

    (RT)

    RT

    /

    RT

    RT

    (2) RT

    (CLASS150900)

    ()

    24 612 14

    (JIS G0581)

    32.8 24.3 25.2

    37.5 31.7 28.6

    23.5 25.7 22.8

    5.0 14.7 15.8

    1.2 3.6 7.6

    25.6 27.3 32.1

    13.6 18.5 22.8

    60.8 54.2 45.1

    20.1 16.3 21.3

    22.9 23.2 32.4

    57.0 60.5 46.3

    http://wingshome.co.jp/introduction.htmlmailto:info@wingshome.co.jp

  • 0c/6

    Wings Corporation

    Doc. No. : WD14-001