U.S.A.S.O.C. – THE MAGAZINE UUnniitteedd SSttaatteess AAiirrssoofftt SSppeecciiaall OOppeerraattiioonnss CCoommmmaanndd

CCoonntteennttss:: LLeetttteerr ffrroomm EEddiittoorr:: PPgg ##44

NNeewwss:: PPgg ##66

TTeeaamm IInntteerrvviieeww:: PPgg ##99

RReevviieewwss:: PPgg ##1155

TTaaccttiiccss:: PPgg ##2255

LLaawwss aanndd SSaaffeettyy:: PPgg ##4411

TTiippss:: PPgg ##4444

WWhhaatt’’ss NNeexxtt -- UU..SS..AA..SS..OO..CC.. –– TThhee MMaaggaazziinnee :: PPgg## 5588

PPhhoottooss:: PPgg ##5599

PPhhoottoo ooff tthhee IIssssuuee:: PPgg.. ##6633

UUppccoommiinngg EEvveennttss:: PPgg ##6644

TTeeaammss:: PPgg ##6677

AAiirrssoofftt WWeebbssiitteess:: PPgg ##7700

OOppss IIddeeaass:: PPgg ##7722

FFiinnaall TThhoouugghhttss:: PPgg.. ##7744

LLeetttteerr ffrroomm EEddiittoorr::

Well here it is! The first issue of U.S.A.S.O.C. – The Magazine! This is a very exciting time for us here are U.S.A.S.O.C. – The Magazine, and we hope it is for you too. This is the first of many issues to come, and we hope you enjoy them as much as we do making them. First off, we here at U.S.A.S.O.C. – The Magazine would like to thank God for helping us put this e-magazine together, and all credit of success of this magazine goes to Him and Him alone. Also, we would like to thank all of you who have helped out by submitting your photos, articles, and everything else. This magazine wouldn’t be what it is, even in this first issue, without people like you. This is corny, but it’s “people like you that make this magazine happen.” Alright so what is U.S.A.S.O.C. – The Magazine? Well when I started thinking about making the e-magazine, I wanted to make it something great so that it’s not just a “wanna-be” magazine, or something that is just plain crap. We wanted to give quality reviews, quality advice, and quality in all other areas of the magazine too. Airsoft is becoming such a big sport now that it is about time that a good, quality magazine be put together. That is how we went into creating this magazine. U.S.A.S.O.C. – The Magazine will feature reviews of the hottest guns and gears, team interviews with some of the best known teams, tips for bettering yourself out on the field, tactics for your teams, and many other things. It’s hard to list them all out, especially when this is the first issue so just bear with us while we get every thing sorted out. But like we said, the main goal of this magazine is to accurately help airsofters in anything that is related to airsoft and to provide quality entertainment for airsofters about airsoft. So with that, thank you for checking out the first of many issues to come. We here at U.S.A.S.O.C. – The Magazine hope you like the magazine and enjoy it as much as we do producing it. Check out our website: www.officialusasocmagazine.com also! Nick Petrus-Owner/Main Editor To contact U.S.A.S.O.C. – The Magazine, please email any questions or comments to: usasoc_themagazine@hotmail.com .

Ultra Force BDU’s Price

New Style ACU BDU Pants or Shirt $29.49

Classic Style BDU in ACU Digital Pattern $18.99

Classic Style BDU’s are also available in 13 additional patterns $17.99 M-65 Field Jacket with removable liner - Several color patterns available $46.99

Fatigue Caps $3.99

ACU Boonie Hats $9.29

Combat, Jungle & Tactical Boots Price

8" Forced Entry Side Zip Tactical Boot $34.99

Forced Entry Black 6" Tactical Boot $22.99

Black Athletic Oxford $23.99

G.I. Type Ripple Sole Desert Tan Jungle Boots $29.99

G.I. Type Desert Tan Speedlace Jungle Boots $24.99

G.I. Type Black Cordura Nylon Speedlace Jungle Boot $21.99

Black Ripple Sole Jungle Boots $24.49

G.I. Type Black Cordura Nylon Speedlace Jungle Boot $23.99

G.I. Style Combat Boots Without Steel Toe $31.99

G.I. Style Combat Boots With Steel Toe $34.49 Laces, Shoe Polish, Boot Care Kits, and other accessories also available Prices Vary

MOLLE Tactical Vests & Pouches, Chest Rigs, Tactical Vests Price

7 Pocket Chest Rig $23.89

All Arms Tactical Vest $53.99

Tactical Hydration Vest $38.99

Compact Plate Carrier $44.99

Crossdraw Vest $53.99

Elite Tactical Vest $53.99

Recon Assault Tactical Vest $68.99

Jungle Battle Vest $58.99

Modular Chest Set $53.99

Modular Plate Carrier $78.99

Modular Style Vest - Accepts MOLLE Pouches $41.99

Modular Style Vest with 8 MOLLE Pouches $89.99

Drag Bags, Rifle Cases, and Shooting Mats $35.99 to $108.99 MOLLE Pouches - Including Magazine, Radio, Grenade, Open top, etc… Starting @ $11.99

Misc. Tactical Gear Price

Helmet Covers - ACU Digital, Woodland Camo, or Tri-Color Desert Camo $5.89

ABS G.I. Kevlar-style helmet $21.89

SWAT Elbow Pads and Knee Pads Starting @ $13.99

Neoprene Elbow Pads, Knee Pads, and Shin Guards Starting @ $11.79

Neoprene Elbow Pads, Knee Pads, and Shin Guards Starting @ $11.79

Fingerless Rapelling Gloves / Full-finger Rapelling Gloves $14.79 / $18.49

Tactical Coalition Shemagh $14.99

Special Operations Tactical Supply

Click the link below to visit our shop at:

http://www.SpecOpsTactical.com

P.O. Box 332 We are an

Valley Stream, NY 11582 Authorized Aimpoint Dealer

(516) 596-8720 We offer 2200+ products!

FREE shipping for orders of $100 or more!! (Continental U.S. Only)

Are you over-paying for your gear?

Get the best prices on great gear at Special Operations Tactical Supply

NNeewwss::

The “News” section is your place for what’s new in the community of airsoft….anything from new weapons, manufacturers, and gear. If you have some news for us about anything relating to airsoft, just send it our way at: usasoc_themagazine@hotmail.com (main editor’s email)

Brand New Systema Motor coming out late 2006!

Systema is breaking out with an all-new motor that will break all the limits of previous versions! They are promising faster rotations and more torque in a single package. The motor will be a popular add-on to your AEG (Automatic-Electric Gun). Previous versions never had high speed and ultra high torque in the same single motor. As you all know, you could either get a high speed or high torque motor but not both in one. This is where Systema has realized the need for a motor with both, and it is in production. The new motor, called MAGNUM, will beat all the performance of past motors-so says Systema. Some specs on the motor include: - Superior neodymium magnets provide unprecedented torque in AEG motor history - Hand-wound rotor coils deliver over 80% of maximum torque instantly (at zero RPM / start up) - Newly designed brush & brush case provide greater contact area for higher current flow without unnecessary surface friction - Individually balanced commutator, meticulously aligned bearing inserts, and new CNC-machined aluminum end bell combines to

ensure rotor stability at extreme speeds. - Capable of powering gearboxes with spring rates of M170 at over 20 revolutions per second! (In conjunction with Systema Helical Super Torque Up Gears and 12v 2400mah battery

Systema will also be releasing theTURBO version for you “ultra-high rate of fire” junkies that will deliver 30 revolutions per second….WOW! This kind of power passes the Tokyo Marui EG1000 by leaps and bounds. To have this kind of power though, you will need a 9.6v 2400mah battery and standard ration gear set. The TURBO does trade speed for torque from what we’ve heard. This means that it can only be used with gearboxes with springs that rate M100 or less. Systema has told the airsoft community that the motor will be released in the last quarter of 2006. The motor is still currently going through tests by Systema. When we have more, we’ll let you know.

Hero Arms to Release the MK46 AEG! We know that this is a few months old, but we thought it should be mentioned. The first complete AEG to be released from Hero Arms (who were former gun-smiths) will be the MK46 AEG. Now some debate whether it should be called the “MK46” because it resembles another support weapon, but because Hero Arms calls it the “MK46”, we will too. A popular feature of the MK46 is that it will have the

STAR type mechbox that will be capable of some 400-500 fps of power! The final product from Hero Arms will be around 350 fps to keep the gun reliable and in limits of most fields’ rules regarding fps (feet per second). As with most guns, you can upgrade it to the 400-500 fps limit that Hero Arms says it will go. Beware though, the reliability of it may be compromised at that level of fps. The MK46 is completely made out of high grade/light weight aluminum. The gun has a synchronized auto-winding box magazine that is mounted to underside of the MK46. All you have to do is pull the trigger and the magazine winders automatically so there is no need to stop. The battery will be concealed in the fore-grip for the nice, clean, and authentic look. A rail on the top cover will allow you to install a scope if you want also. The full metal extendable stock is sturdy and real easy to pull out and lock in place too. RedWolf Airsoft has said that their in-house tests of the prototype were great! It fired flawlessly and very rapidly, pumping out around 15 rounds a second which totally destroyed their cardboard target. Believe it or not, they also say that the accuracy on the gun is pretty good too, so that will be a big hit among the buyers. There is only a full-auto rate of fire, so beware of that. If you have quick fingers, you can get off about one-two rounds at a time so says RedWolf Aisoft. The gun is also surprisingly light for the size of the beast. Beware again, you do need some muscle endurance to lug this all day. Hero Arms reports that they will only import about 100 units worldwide so if you have one…you are one out of a hundred in the world. For the MK48 7.62mm fans, Hero Arms is considering about making one for you, but they aren’t sure yet. Retail price has not been set, but it’ll be around the STAR’s 100% plastic M249 which makes this gun a collector’s edition at an amateur’s price!

TTeeaamm IInntteerrvviieeww:: AAMMSSOOGG

Q. How about a little history about AMSOG and its members meaning: How did you guys first start? When did you start? Who started it? Where in Arizona are you located? Etc. A. Originally most of us came together on a team called SWAIRTAC that was founded by Justin Raley, I am not clear as to exactly when SWAIRTAC was founded as I was not present. SWAIRTAC eventually dissolved as things do in early 2005. In early 2006 I posed to Far that I had a desire to bring the team back together, after some discussion and a few phone calls … BANG Arizona Military Simulation Operations Group or AMSOG was born. Why the name change? Well the founder of SWAIRTAC was no longer in Arizona and none of us felt it would be SWAIRTAC without Mr. Raley so Far and I felt a new name and a new identity was the only option, and we haven’t looked back since. AMSOG members are located throughout our great state of Arizona, but our base of operations is located in Tucson, Arizona. We do have a member or two outside of Arizona.

Q. Is AMSOG based off any military group? A. Out of respect for our armed forces no, but we do however wear MARPAT as our team uniform as we feel it is the best camouflage available today that is affordable and readily available. We also do utilize the basic rank structure of the US Army as it facilities structure within the team and for no other reason. Q. What do you consider yourselves as a group meaning: a CBQ team, outdoors team, all-around team, etc? A. All around, within the team we have members with real world experience in all areas of combat, which is what brought most of us to Airsoft to begin with. We, unlike a lot of teams, attempt to stay true Mil-Sim. Q. Now a lot of people, including myself, consider you guys a professional airsoft team, but do you consider yourselves a professional airsoft team, or just one that does it when you can? A. Thank you for the compliment. We would never call ourselves “Professional”. We do make a strong effort to be professional in the way we conduct ourselves on and off the field, but I couldn’t call us “Professional”. Maybe someday with sponsorship I would use the word “Professional”. Q. How many active members do you have and who are they? A. 17 active.

• Commanding Officer = Dan “Tonk” Tonkovich (Me) • Tucson XO = Benn “Farslayer” Psalms • Phoenix XO = Dave “Gixser” Huyck • Quinn “Bones” Kavanaugh • Cody “Kodiak” Baker • David “Gadget” Pathammavong • Robert “Tank” Pathammavong • Mike “Teach” Teachout • Reid "Delta Echo" Inman • Robb "Bagger" Salzmann • Weston "Chainsaw" Barkley • Nathan "Grim" Gilbow

• Greyson "Ares" Morley • Keith “EagleEye” Lee • Brent “Doogey” Armer • “Woody” McClendon • Joe "Sarge" Bouchard

Q. Are you recruiting? A. Yes, always. Q. If so, then what are you requirements? A. We require a minimum age of 18, an M-16 variant weapon within 90 days of joining the team, one must be in good physical condition, and have the willingness to attend 4 meetings/games/practices a month. Q. Do you have a website or any contact information for airsoft fans out there? A. Of course, http://www.AMSOG.com is the best way to contact us. Q. What events have you participated in or plan to? A. We plan to sponsor one game ourselves every six months but to try to attend as many local games as possible. Q. Any on the national level? A. Not as a team, no. Many of our teammates have attended events such as Lionclaws, Irene, and Bulldog. Not to mention a few random others. Generally airsofters in Arizona attend events and represent Arizona and not any individual team. Q. Have you guys ever had any trouble with the law regarding airsoft in Arizona? A. No never, we make a very conscious effort to stay current on all local, state, and federal laws.

Q. What would you suggest to a bunch of guys who want to make a new airsoft team? A. The single most important thing you need to do is get organized, plain and simple. A close second would be to learn to communicate effectively. Lastly, form and maintain a strong team core. You get out of it what you put into it. Q. What guns do you guys have? A. Well as a team we require M16 variant weapons to facilitate the sharing of magazines, and they range from Classic Armys to Tokyo Maruis. The Overwatch guys have no standard weapon requirements and nether do the support guys. Q. Are any of your members in or have been in the military or law enforcement fields? A. We have members who have served in all branches of the US military. We also have active duty Homeland Security and Federal Security members. Q. How often do you guys meet together and train or sit down and prepare what to do for an Op? A. As often as possible but face to face a minimum of 4 times a month, and we do have a public and private forum on our website to do the day-to-day communications. Q. Any tips you can give us on how you train? A. Often. Learn from your fellow teammates and again learn to communicate effectively, and openly I can’t emphasize that enough. Q. Any final tips you can give the readers? A. The most important tip I can give is to remember to have fun, I mean it is a game. I would be happy to answer any questions, just shoot me an email Tonk@amsog.com or post in our forums and thanks for this opportunity.

Well that sums it up. Thanks again to the boys at AMSOG, especially Dan “Tonk” (the founder) for letting us interview AMSOG. These guys are really the top dogs out there. Not only are they great airsofters,

great guys in general, but now they will be “movie stars” if you will. They were asked by A.I.A. Productions to be the National Guard in the upcoming independent movie based off of Mary Shelley’s book: The Last Man. To check out the guys from AMSOG and photos of the movie shoot, go to: http://blog.jamesarnett.com/ to see more. Once again, I would like to thank AMSOG and all its members for allowing U.S.A.S.O.C. to conduct this interview, and if you would like to see your team featured in the magazine, please go to our website: www.officialusasocmagazine.com or email the main editor: usasoc_themagazine@hotmail.com. Now enjoy some photos that AMSOG has allowed us to use.

(Courtesy of AMSOG)

(Courtesy of AMSOG)

(Courtesy of AMSOG)

RReevviieewwss:: CCllaassssiicc AArrmmyy MM1155AA44 CCQQBB::

Did you ever need a gun for close quarter battles (CQB)? Ever want something other then the frequently used MP5A4? Have you been saving up for a great CQB gun but can’t find one? Well there is a gun out there for you….it is the Classic Army M15A4 CQB. So how about a little history lesson on the ol’ M15A4 CQB? The Classic Army M15A4 CQB is a detailed full metal replica of the NSWC (Naval Special Warfare Center) Mk18Mod0 Subcompact Assault Rifle. It is classified by the US military as the Mk18Mod0. The CQB-R was originally part of the SPR program, but was later intended as a drop-on upper receiver kit for the M4 SOPMOD kit. It started development in 2000 but quickly gained a following as its own weapon. TACOM did purchase a few thousand CQB-R uppers, and the M4 DEVGRU is either based on or closely resembles the CQB-R. The gun basically consists of some major components: the fore end, which consists of a modified/shortened 10.3” barrel; a KAC QD silencer compatible flash hider; KAC M4 RAS system; the receiver,

which is simply an M4A1 flattop receiver with a gas port opened up to accommodate the shorter barrel; the detachable rear sight manufactured by LMT (Lewis Machine & Tools); and the retractable Crane type butt stock. It also features angled cheek welds and “storage compartments.” The airsoft version is really close to the actual Mk18Mod0. It sports full metal construction, die cast receivers, realistic barrel and gas tube, laser engraved markings, and stock upgraded gearboxes….what more could you ask for?! How about a 7mm bearing gearbox with reinforced gears and cylinder components; optimized piston head, mated to an improved; a metal hop up, an amazing new stock; a shortened M4 CQBR upper, metal, detachable, and fully adjustable rear sight; a vertical fore grip; a M4 RAS rail system; RAS panels; and a 300 round hi-cap magazine! Basically if you are into CQB or know anything about CQB this should sound like heaven on earth for you. Classic Army really banged out on all cylinders this time for us airsoft fans. A buddy of ours at U.S.A.S.O.C. has one of these, and we were able to do a detail review of this AEG because of his allowing us to check out the gun (if you have a review of any gun you would like to see in U.S.A.S.O.C., just send it our way at: usasoc_themagazine@hotmail.com ~ main editor’s email). Ok so on with the review…

The first impression we got when we looked at the gun was that it was superbly detailed from end to end. Again, Classic Army really hit it big time with this gun as far as details. It has a sleek, black metal body with Armalite logos and laser engravings on the laser. It is

smaller then most AEGs, which wasn’t a surprise to us since it was dubbed a “CQB” gun. To roughly compare the length, it is about the length of a MP5A4. One of the main things we loved about the gun was how sturdy it felt, not only as you hold it, but when you shook it also (hint: when you run, your body and gun bounce and shake….). It is much stronger then most Tokyo Marui models. It has a RIS, and a crane stock which most new comers to the gun like but for many that was soon to change. I’ll explain what I meant by that latter. Also, along with the sturdiness of the gun, the internals are great! This meaning they are well placed and re-enforced, which equals NO gear replacements when upgrading if you don’t want to. Overall, it was one of the best guns I had a chance to look at.

Now for the Pros about the gun. There are many pros with the M15A4 CQB. One of them is its looks. It has a wonderful black finish and has a fake gas tube in the fore grip/RIS which really adds a lot of details to gun. Its sturdiness is another pro about it. I know it was talked about earlier in the article, but for some of the things that happen during a battle to your gun….sturdiness helps a whole lot! A lot of the strength and weight might be attributed to the fact that most of the

gun is made of metal, with the exception of the pistol grip, the vertical fore grip, the crane stock, and the two rail covers. Also, it’s not too heavy, an advantage of the CQB. It is lighter then the Classic Army M15A4 Carbine because of where the battery is placed; the crane stock has a much better feel to it then the Carbine also. Another pro is that all the wiring with all of Classic Army’s guns, especially with the CQB, is done so all you have to do is hook up a fresh battery to it and then “Git-R-Done.” Due to the fact that the internals are so re-enforced, the internal parts hardly ever break which means many dollars in savings for the owner. For some this is a pro and for others it is not, but the barrel is shorter then other Classic Army guns which makes it better because of the new Hop-Up system (yellow instead of the normal black). While in production of the gun, Classic Army redid the trigger contact plate. It was latter told by Classic Army that this was made to be a smoother action then the Carbine. And finally, you don’t really hear the gears and spring crank when firing the gun. With the Carbine, there was about third of a second, or less, before the gun actually fired, and you could really hear the gears and spring make that cracking noise. So those are the pros for the gun…pretty great so far.

Now for the cons about the M15A4 CQB. Again these are the ones we found, so there may be more cons for you with the gun, or there may be less. First off, Classic Army glued on a black-flash suppressor and painted it orange which is not too normal on most AEGs. We’ve heard that a lot of people have just either taped or painted over the orange tip because of how difficult it was to try and take it off. The dust cover, also, needs to be opened by hand and held with a magnet. This wasn’t a big challenge at all, but since there were very little things wrong with the gun, we decided to write it anyways. The crane stock can be hard to use which leads into another con. Some people blame the manual on this. The manual says that by pressing down the level on the crane stock, it will allow you to slide the stock out to change batteries which many people have had trouble with. We’ve found, as others, that instead of pressing the level down, you need to pull it away from the stock. This should allow for easily changed batteries. Another thing about the crane stock is that sometimes it’s hard to adjust it so that it will slide all the way in when the battery is in place. This issue may be due to the size of your battery. Also, the RIS doesn’t line up exactly with the Classic Army receiver. It looks to be between ½ - 2mm higher then the specs say it should be. Another thing about the RIS is that sometimes the covers don’t fully locked (click) into place meaning that at least one cover is loose at times. Those are the cons for the gun. We were being real picky when we went over the gun and tried to find anything and everything. If some of these “cons” are not bad things for you, then great, but we wanted to give a broad variety on what we found that could be called “wrong” with the gun.

So the conclusions on M15A4 CQB are: it is designed to be used easily, is versatile and reliable, and has some of the best looks and details out there for an airsoft gun. We would recommend this gun to everyone who likes not only CQB action, but also a better, shorter version the M15A4 Carbine by Classic Army. It can be used for outdoor battles, but as the name says, it is better indoors. We’ll leave you with the official specs for the gun:

• Modified Wiring Switch • Hi-Cap Magazine (300round) • Special Forces Crane Stock • Imitation Gas Tube • 7mm Metal Bearing Gear Box • Metal Detachable Rear Sight • Easy Disassembly Metal Body • Colorful parts inside the Gear Box • Real Gun Logo with Serial Number • Nice Surface Treatment on Gear Box • Bearing Spring Guide and Piston Head • Reinforced Parts (Piston, Gear set and Van Sealed Cylinder) • Gear Box-Version 2 • Length: 700-800mm (change measurement) • Weight: 3000g (change measurement)

• Barrel Length: 280mm (change measurement) • Muzzle Velocity: 85-80m/s (change measurement) • Battery best to use for power: 9.6 1100mAh (crane stock

version) • Barrel Caliber: 6.08mm • 330 FPS • Shooting modes: semi and full auto • Retail price range: $400 .00-$500.00

RReevviieewwss:: GGeeaarr//BBaatttteerryy//EEttcc

AAiirrSSppllaatt’’ss TTaaccttiiccaall VVeesstt OODD wwiitthh HHoollsstteerr VVeesstt::

When I first ordered this vest back at the Christmas of 2005 from Airsplat, I couldn’t wait. Well Christmas came, and I got the vest. It was great! First Impression: When I took it out of the bag, it smelled like that new car smell. It was great. It was just the right color OD (Oliver Drab) for those woodland battles, yet it could be used if one was to do some CQB ops. For the price of $39.99, you get a lot. You get a modular cross-draw pistol holster, tactical web belt, three airsoft AEG magazine pouches, four pistol magazine pouches, a radio/utility pouch, and it is US MOLLE compatible for other utilities, accessories, shovels, etc. Not only that, but it is completely modular and ventilated. It also includes a back pouch for a CamelBak or a Hydration System Bladder. For $39.99, this is a steal! A real steal folks…seriously. I’ve had this vest for awhile now, and it has never failed me. For the price I got it for, I thought it might just survive for a few months, and then I would get a

brand name one - but no. There was no need too. Sure you can spend $150.00+ on a vest and have a little more, but for what you get with this vest, you can’t go wrong. Ok, so for some of the more detailed conclusions. It has three pistol magazine pouches in the top left of the vest. Also, there is the radio/utility pouch just above them. The vest has three AEG magazine pouches on the middle to lower right of the vest. The only thing I will say against the vest is that a Classic Army M15A4 Carbine magazine has a little trouble getting in the AEG pouches. It does fit, don’t get me wrong, but it is a little snug. For you MP5A4 guys, this won’t be a problem at all. It has the cross-draw pistol holster on the bottom left side of the vest with another pistol magazine pouch also. The vest has a utility pouch on the upper right of the vest. Inside the vest are two huge pockets to store anything you like in there, one on each side of the vest. It has adjustable straps so it will fit most lean to semi- fit guys. The web belt built in is a really nice touch as with the zipper. Once this puppy is on, it really isn’t coming off till you take it off. It fits just tight enough for you to move around without sucking the breath out of your mouth, yet it does allow you to move freely which is a big plus. The back of the vest has some more adjustable straps and a large pocket for a CamelBak. It also has a “carrying handle” for one to grasp it by. I’m sure it might be strong enough to pull someone, but for safety reasons, we at U.S.A.S.O.C. wouldn’t recommend it to anyone. Also on the back is the US MOLLE compatibility for you carry along your favorite accessories.

This vest is by far the best vest out there for this price. You just can’t beat it, because there isn’t anything like it out there on the market for its price. U.S.A.S.O.C. fully recommends this vest to any and all. It is great for beginners and advanced players. You will not be disappointed at all. If you have a review on a gear/batteries/etc that you have and want to see them in U.S.A.S.O.C., send it our way: usasoc_themagazine@hotmail.com (main editor’s email).

TTaaccttiiccss:: BBaassiicc MMiilliittaarryy TTaaccttiiccss ““110011ss””::

The words “Military Tactics” are commonly used words among airsoft players, paintball players, and obviously, military personal. In this article there will be basic military tactics information and how to apply them to your team or just for yourself. In later issues, there will be more in-depth articles on tactics, but before one can learn the advance, one must learn the basics. Again, these are the basics many of the readers will know, but for the people new to the sport, we thought we should start at the beginning. The words “military tactics” refer to: methods of engaging and defeating an enemy in battle. Throughout time, military tactics have changed extensively under the influence of philosophy and technology. Up until the 19th century, military tactics were mainly on battle warfare concerning how to maneuver units in battle on open terrain. If you think about it, most battles around the 19th century and before were conducted when both armies met on open fields and fought, especially in the European wars and battles. In modern terminology, tactics refer more to the operational application of forces

to a situation. Don’t get this confused with military strategy which is concerned with more long-term results. There are many levels on which tactics can be brought up on: from room clearing to how to clear miles of terrain. Common military tactics would include the following: frontal assaults, flank (rear) assaults, ambushes, etc. Now let’s talk about some different basic types of tactics for you and/or your team to use. Reconnaissance is the military term for gathering information about the enemy. This could include: where they are located, how large their force is, their intentions, the best way to insert and extract into and from an enemy’s AO (Area of Operation), etc. Basically: you are gathering all the information you can about the enemy and how best to complete your assigned tasks and mission. This provides the solid building blocks for the intelligence side of the operation. Reconnaissance is often referred to as “recce” or “recon” depending on the role of the reconnaissance mission. Patrolling is another tactic. Small groups of units or individuals (depending on how many men are needed) are sent from a larger formation to complete a certain objective and then return. There are many types of patrols, each depending on a different objective. The most common patrol is collecting intelligence by carrying out a reconnaissance mission. The patrol may try to remain covert and record info on the enemy without being detected. Some reconnaissance patrols are actually overt, which is the exact opposite of covert. Their mission may be to interact with the civilian population and receive information concerning the enemy they are fighting. A fighting patrol is a group with a good substantial amount of men (platoon or company) and equipment to raid or ambush a specific enemy. Don’t get this confused with an attack because in a raid or ambush you do not hold the ground in which you acquire after defeating the enemy. A clearing patrol is a brief patrol around a newly occupied defensive position to ensure the area is secure. These kinds of patrols are sent on missions called “screens” which means to patrol a certain area.

Ambushing is another military tactic used for quite some time where the ambushing force uses cover, or concealment, to attack an enemy at a certain point when they pass by. The ambushers strike from a concealed position such as dense bushes or behind hills. This tactic is usually used to gather information or to establish control over an area. Ambushing is most often used by ground troops up to a platoon size against enemy targets. Ambushes are multi-phase operations and usually should be planned in some detail from insertion to extraction (hint: always have a plan B, always then have a plan C, etc). Since ambushing is used frequently, I thought I should outline the basics for planning for, setting of, executing of, and extracting from an ambush. The first step is planning. The first step is to designate a kill zone. This is a reasonable position in which there is cover and a vantage point that all your team members or you can see when the enemy is in range. The next step is setting the ambush. To be successful in an ambush, a patrol must deploy into the area covertly and establish secure and covert positions overlooking the kill zone. If your squad has enough men, think about a cut-off group. This is a group which “scouts” ahead of the kill zone, radios the man in charge of the operation when the enemy is approaching, and prevents any enemies from escaping once the ambush is initiated. The main thing during setting the ambush is the man in charge should make sure that none of his men are directly in each other’s line of fire. Once your team, or you, is set up, you need to then wait for the enemy to come into sight. The next step is pretty simple: eliminate the enemy - the execution phase. Again, the coming of the enemy should be signaled by the cut-off unit. Once the enemy is in range or in the middle of the ambush kill zone, the commander should initiate the ambush with either shots from his weapon, an explosive devise, a hand signal, or a simple whistle blast. Once that has happened, it’s up to everyone in the unit to shoot straight and shoot fast. The final part of this step is to check the enemy for intelligence, taking prisoners, checking for bodies, and if you are nice, treating the wounded enemy.

The final step is extraction. Your squad being compromised, there should be an extraction plan to get out of the AO as soon as possible before assisting enemy units arrive. Now let’s talk about a frontal assault in more detail. A frontal assault is also called a suicide strike. Why? Well, it is basically a direct, hostile movement of forces towards the enemy in a large number in attempt to defeat them. This should always be the commander’s last resort. During the 19th century, this type of warfare was popular on horses, but as the range and accuracy of weapons improved, it proved to be suicidal. This type of tactic was also used a great deal in the American Civil War and World War I in trench warfare, being one of main reasons for the large number of casualties during trench warfare also. Now these are the very, very basic military tactics. Later on in the issue, there will be a more in depth look at some tactics that you and your team can apply more directly to airsoft.

TTaaccttiiccss:: MMoorree IInn--DDeepptthh LLooookk iinnttoo tthhee BBaassiiccss::

Now that the basics were covered in the above article, I want to discuss a more in-depth look on how you can apply these to your team. You may want to modify them to adjust to your team’s situation, or you may not. Regardless of that, here are some more in-depth tactics of the “101’s” of military tactics.

Basic Field Operating Procedures:

Infantry Minor Tactics or IMTs are the very basic tactics that are employed at the squad, section, or platoon level. They are, generally speaking, reasonably similar across most modern armies. In most situations, except static defense, IMTs are based on the principle of "fire and movement" - that is firing and moving, often in pairs. One soldier is firing to suppress or neutralize the enemy while the other soldier moves either toward the enemy or to a more favorable position to attack/counter-attack. The movement often uses

only 5-10 feet per move. This technique is sometimes referred to as "pepper-potting" (British) or "fire team rushes"(US). IMTs are typically taught to all arms and services both in basic training and often also whilst undergoing non-infantry specialty training. In some military forces, such as the Australian Army and the United States Marine Corps, all units in the field force regardless of corps, regiment, trade, or specialty are supposed to undergo annual refresher training in IMTs, on the basis all soldiers in a conflict can be expected to be involved at least providing local security for their unit or formation. Most IMTs are taught in the form of a drill – i.e. a series of choreographed steps that occur in reaction to a certain stimuli, such as sighting an enemy to the front, or being engaged by enemy from flank etc. The initial stages of the drill are reutilized, and therefore, action doesn't require full appraisal of the situation by individual soldiers or unit commanders. Such stimulus-response training allows coordinated responses without the need for direct orders. In combat, this allows the first few moments of the engagement to occur almost automatically and gives the soldiers a way to respond appropriately and predictably (i.e. take cover and start returning fire, or shift the flanks to becoming in enfilade to a surprise attack) while the unit commander assesses the actual situation and issues orders further orders. Perhaps the most basic of all IMTs is the "Basic Drill". The Basic Drill is the drill all individual soldiers are supposed to perform if they come under "effective fire". The basic drill is:

• Run two or three steps • Drop to the ground or into cover • Crawl a few yards (or move under concealment/cover) • Observe • Shoot (identified targets of opportunity within effective range) • Move • Observe • Shoot

• Move • Repeat until issued orders.

The basic drill is designed to provide the soldier with simple steps to follow under the stress of combat. The essential goal of the basic drill is to move the soldier into cover, remove him from the last position where he was likely to be seen by the enemy, and keep him "positively engaged” (identifying and shooting) with any targets in his effective area until his commander makes an appraisal and issues instructions. Fire and movement is the basic military tactic used by small unit commanders on the modern battlefield. It uses the power of suppressive fire to decrease the enemy's firepower, organization, intelligence, and morale. This tactic has been brought to a new level with the advent of automatic weapons, but also has been used in its basics since ancient times with slingers and archers providing covering fire for advancing infantry and cavalry. Fire and movement work on the basis of suppressing an enemy with an appropriate level of fire, while at the same time advancing. This will take the form of two units of whatever size appropriate - two soldiers or larger. Base of Fire One unit will provide a base of fire from a position in order to suppress the enemy. This will take the form of sustained fire on the enemy position as to prevent movement or return of fire on the advancing unit. Suppression Heavy and continuous fire keeps an opponent suppressed and therefore limits the overall firepower of a unit (if a platoon has 30 soldiers, but only 15 are shooting back because the other 15 are being suppressed, you have tactically limited that unit's firepower by 50%). It also builds up confusion and sometimes panic for undisciplined forces. The fire cuts down on an enemy's intelligence in that they are not able to assess the situation as clearly. Finally the suppressive fire hurts an enemy's morale by scaring them, for the fire

is continuous. In actuality, it scares more then it kills, but an enemy who hesitates the least bit is at a great disadvantage. Advance While a base of fire is set up, the second unit will advance to cover in front, in the process setting up a new base of fire at this point. After a new base of fire has been set up the first unit will advance, under cover of the new fire base, to a new position and set up another fire base there. This continues on and on till the enemy is either captured or killed. Assault The “advance” is repeated until the units have closed upon the enemy position. At this point a unit will close in on the enemy and destroy them. Overwatch: In modern warfare, overwatch is the state of one small unit supporting another, while they are executing fire and movement tactics. An overwatching, or supporting unit has taken a position where it can observe the terrain ahead, especially likely enemy positions. This allows it to provide effective covering fire for advancing friendly units. The term overwatch originates in U.S. military doctrine. An ideal overwatch position provides cover for the unit and unobstructed lines of fire. It may be on a higher piece of ground or at the top of a ridge, where a vehicle may be able to adopt a hull-down position. If the overwatching unit is in a position to fire over advancing friendly units, great care must be taken not to let fire fall short. The friendly units should be within tracer burnout (the range at which tracer rounds are visible). Overwatch can be performed by platoons during company fire and movement, infantry sections, in platoon fire and movement, or even by fire teams or individual soldiers, in the final stages of an assault.

Offensive Tactics: These following tactics are basic offensive tactics on how to out-smart the enemy and how to defeat them by basic common knowledge of tactics. A flying wedge or flying V is a charging technique in which troops are arrayed to form a V- shaped wedge formation or boar's head. Military uses: If the point of the wedge can breach the enemy line, the following troops can widen the gap. As successive ranks of the wedge engage, they can draw their opponents' attention away from previous ranks, thereby protecting them. This tactic relies on momentum and penetration. If the point of the wedge can be stopped for even a moment, the wedge can be easily enveloped in a pincer attack which will be discussed later. The tactic is especially effective when used by heavily-armed infantry against shield wall defensive formations, where defenders link their shields to form an all but impenetrable wall. The flying wedge can be used to knock a small section of the wall open, and flank the enemy from inside their own line. The pincer movement (double envelopment) is a basic element of military strategy which has been used, to some extent, in nearly every war. The maneuver is mostly self-explanatory; the flanks of the opponent are attacked simultaneously in a pinching motion after the opponent has advanced towards the center of an army which is responding by moving its outside forces to the enemy's flanks, in order to surround it. At the same time, a second layer of pincers attacks on the more extreme flanks, so as to prevent any attempts to reinforce the target unit. Most infantry combat, on every scale, is based in some fashion on this military tactic and it is commonly used by aircraft as well.

In military tactics, a flanking maneuver, also called a flank attack, is an attack on the sides or rear of an opposing force. If a flanking maneuver were to succeed, the opposing force would be surrounded from two or more directions, which often grants victory to the flanking side. As the flank is usually the weaker part of an army, flanking often gives the attacker an advantage on the psychological condition or the practical condition of an army, depending on the situation. The flanking maneuver is one of the most basic tactics used in battles. There are two types of flanking. In the first type, the principle of the flanking maneuver is to be sudden and able to catch the enemy by surprise, causing the enemy to overreact or retreat when they are surrounded from a few directions. Usually this type of flanking is concealed in an ambush. The second type is obvious and transparent, and thus gives the enemy a chance to prepare. A typical example will be a platoon encountering an isolated enemy combat outpost. Taking fire from the combat outpost, the platoon commander may decide to flank. In this case, one third to two thirds of his platoon may remain in position and "fix" the enemy with suppressive fire. This prevents the enemy from retreating or reorienting to a new threat. The remainder of the platoon will advance discreetly to the flanks of the enemy, before destroying the enemy in rushes. Because of the possibility of fratricide, coordination is very important. The most effective form of flanking maneuver is the double-envelopment that involves simultaneous flanking from both ends of the line of battle. To prevent from being flanked, a unit could be sent to engage the enemy flanking unit before the enemy reached its target. Motti is a Finnish military slang for an encircled enemy unit. This tactic of envelopment was used extensively by the Finnish forces in the Winter War and the Continuation War to a good effect. Basically motti is a double envelope maneuver using bad terrain and light troops to encircle an enemy restricted on good terrain or roads. They are heavily outnumbered, but mobile forces could easily immobilize an enemy twenty times larger than itself.

The idea is to cut the enemy columns, or battle groups, into smaller groups and then encircle them by light and mobile forces, such as ski-troops during winter. A raid is a brief attack, normally performed by a small military force of commandos, or by irregulars. A raid may be conducted to demoralize or confuse an enemy, to ransack a camp, to obtain or destroy goods, to free POWs, to kill or capture people important to an enemy force, or to gather intelligence. Raids are especially common in guerrilla warfare also called Special Ops. Hit-and-run tactics is a tactical doctrine where the purpose of the combat involved is not to seize control of territory, but to inflict damage on a target and immediately exit the area to avoid the enemy's defense and/or retaliation. These tactics are a cornerstone of irregular warfare. Like guerrilla warfare, militant resistance movements, and terrorism where the enemy typically overmatches the attacking force to the point where sustained combat is to be avoided

Offensive Maneuvers: Offensive Maneuvers are different from offensive tactics because offensive maneuvers are some of the ways on how to conduct offensive tactics. Skirmishers are infantry soldiers stationed ahead or alongside of a larger body of friendly troops. They are usually placed in a skirmish line to either harass enemy troops or to protect their own troops from similar attacks by the enemy. Skirmishers are generally lightly armed and armored for increased battlefield mobility. Human wave attack is a military term describing a type of assault performed by infantry units. This type of maneuver is in which soldiers attack in successive line formations, often in dense groups and generally without the support of other arms or with any sophistication in the tactics used. The term is usually connected to conscript armies, whose poor training usually leaves them little tactical flexibility. The term has come to be used as a pejorative. In a human wave attack, there is no attempt to minimize casualties; on the contrary, part of the tactic involves presenting the defender with the shock value of overwhelming numbers of attackers. This dense concentration of troops in the open tends to lead to very high casualties. Shock and awe, technically known as rapid dominance, is a military doctrine based on the use of "overwhelming decisive force", "dominant battlefield awareness", "dominant maneuvers", and "spectacular displays of power" to "paralyze" an adversary's perception of the battlefield and destroy its will to fight. The doctrine was written by Harlan K. Ullman and James. P. Wade and is a product of the National Defense University of the United States.

Defensive Tactics and Maneuvers:

Again, as with offensive tactics and maneuvers, don’t get the two confused: Maneuvers are the way on how to conduct tactics.

Defence:

Yes, a defence. It is not a misspelling. Let me explain: a conventional defence strategy would concentrate all military resources at a front line which, if breached by an attacker, would leave the remaining defenders in danger of being outflanked and surrounded. This would also leave supply lines very vulnerable. A “defence in-depth strategy” requires a defender deploy his resources such as fortifications, field works, and military units, both at and well behind the front line. Although an attacker may find it easier to breach the more weakly defended front line as he advances, he will continue to meet effective resistance. As he penetrates deeper, the attacker's flanks become vulnerable. Should the advance stall, the attacker himself risks being enveloped also. The “defence in-depth strategy” is particularly effective against an attacker who is able to concentrate his forces and attack a small number of places on an extended defensive line. Defenders who can fall back to a succession of prepared positions can extract a high price from the advancing enemy while themselves avoiding the danger of being overrun or outflanked. Delaying the enemy advance mitigates the attacker's advantage of surprise and allows time to move defending military units to make a robust defence and to prepare a counter-attack. A well-planned defence in depth strategy will deploy forces in mutually supportive positions and in appropriate roles. For example, poorly trained troops may be deployed in static defences at the front line whereas better-trained and better-equipped troops form a highly mobile reserve. Successive layers of defence may use different

technologies or tactics; another example would be: a row of dragon's teeth may be a problem for tanks, but no barrier to infantry while another barrier of wire entanglements has the opposite effects. “Defence in-depth” may allow a defender to maximize the defensive possibilities of natural terrain and other advantages. The disadvantages of “defence in-depth” are it may be unacceptable for a defender to plan to give ground to an attacker. This may be because: vital military or economic resources are close to the front line or yielding to an enemy is unacceptable for political or cultural reasons. A scorched earth policy is a military tactic which involves destroying anything that might be useful to the enemy while advancing through or withdrawing from the area. The term refers to the example of the practicing of burning crops to deny the enemy food sources. Although, it is by no means limited to food stocks and can include shelter, transportation, communications, and industrial resources which are often of equal or greater military value in modern warfare. The practice may be carried out by an army in enemy territory, or by an army in its own home territory. We here at U.S.A.S.O.C. must insist that no one ever do this anywhere for any airsoft or other reasons at all. A counterattack is a military tactic used by defending forces when under attack by an enemy force. During their assault, the attackers may have become vulnerable through exhaustion or complacency. At the right moment, the defenders aggressively charge out of their fortifications meeting and stunning their attackers directly, and gain the initiative. This can break a siege or change the tide of a battle. However, if the wrong moment is chosen, or a counterattack is poorly executed, a military disaster could result for the defending side since the defenders are no longer protected by their fortifications. The Parthian shot was a tactic employed by ancient Persian horse archers. The horsemen would feign retreat at full gallop, and then suddenly turn their bodies around and fire arrows at the pursuing enemy. You can apply this by retreating and then turn around and firing back. The Parthian shot is a forerunner for the leapfrogging tactic. This tactic can be used for both offense and defense.

Retreats:

Here I will discuss how to retreat if your unit is to come under fire and need to extract fast. Also, they are good tools for moving out of an AO without everyone running in each direction in panic. These help build confidence, teamwork, and a professional and efficient way of retreat while still hurting the enemy. Center Peel, or simply Peel for short, is a type of retreat practiced by modern-day infantry. This particular tactic is more specifically designed for situations where smaller groups of infantry withdraw from an engagement of a much larger force. In general terms, it is a sloped or diagonal retreat from the enemy.

This tactic was designed with human psychology in mind (no pun intended). It begins with an infantry unit facing off with a larger force of enemies. Once the command is called, the soldiers implement a battle line formation facing into the enemy's midst. The soldiers then begin, or continue, to use suppressing fire to delay the enemy's attack and advance. Depending on the direction of the retreat, the second to last soldier on the far most end, opposite the retreating direction, calls out, "Peel 1". Now, the infantryman next to him, on the end of the line, ceases fire, works his way behind the line towards the other side, takes a position one meter diagonally back from the far most soldier on this side, and resumes suppressing fire. Then, the process repeats with the commands being simplified to "Peel.” The “1” is only stated at the beginning to signify the actual start of the tactic. The slanting motion of the tactic gives the impression of increasing numbers of infantry joining the battle, a psychological move designed to demoralize the opposition. Leapfrogging: This is the military tactic of using a combination of suppressive fire with either offensive forward movement or defensive disengagement. As members of a unit (element to platoon level) fire at the enemy, other members advance to cover; these two groups continually switch roles as they surround the enemy. This process may be done by "leapfrogging" by fireteams, but is usually done within fireteams along a squad/platoon battle line to simulate an overwhelming movement towards the enemy and make it more

difficult for the enemy to distinguish specific targets. This military tactic takes continual training and focused coordination to be effective on the modern battlefield. It is also a common tactic practiced by Special Forces and Special Ops to move to an extraction point once a mission has been completed, or to extract fast if they come under fire.

LLaawwss aanndd SSaaffeettyy::

Many people are concerned that the realism of airsoft guns makes them dangerous. Parents need to be aware that giving an airsoft gun to irresponsible children can put their child in danger. In certain countries where real firearms are illegal the police, and others, may understand that children are playing with fake guns. In the United States, however, airsoft guns are regularly mistaken for real guns. Just as you would not brandish a real firearm in public, the same is true with airsoft guns. Airsoft guns are not cap guns or squirt guns. Be aware that if your child brings an airsoft gun to school, or any other public place, they may be arrested or, at worst, shot by a police officer.

If you are a parent and are reading this, thank you for taking responsibility and being pro-active in learning about airsoft guns. To learn more about airsoft gun safety please read on.

Not only do airsoft guns appear to be real, they also shoot plastic pellets. Many of the more expensive models such as AEGs are fully automatic. The speed at which airsoft bb's come out of airsoft guns is much slower than the speed that bb's are shot out of a traditional bb gun. Generally speaking, this speed allows people to shoot at each other with airsoft guns safely, under certain conditions. The first condition is eyewear. Never, ever, shoot at someone who is not wearing proper eye protection. Proper eye protection means eye goggles rated at least ANSI Z87.1 or paintball goggles. Proper eye protection is not military sun/dust/wind goggles, ski goggles, or shop goggles. Do not risk your own eyes or take on liability for your friend's eyes. Always wear proper eye protection when shooting airsoft guns! Read more about eye protection.

Also, please be aware of the speeds at which all airsoft guns used in an airsoft game are shooting. Typical out-of-the-box airsoft guns shoot at ranges anywhere from 250 feet per second to 350 feet per second. Airsoft guns can be modified to shoot faster. Speeds between 375 feet per second and 400 feet per second are usually the maximum speeds US airsoft teams will allow. Make sure that anyone firing an airsoft gun over 400 feet per second is experienced, can

accurately judge distance, and does not engage targets at close range. Never mix real bb guns into an airsoft gun game. If you are unsure of an airsoft gun's firing speed, either buy a chronograph to measure the speed or simply do not allow it at a game.

The simplest rule to remember with airsoft guns is to treat them as real guns. An accidental discharge at close range can have any number of damaging results including, but not limited too, broken teeth and damaged eyes.

When transporting your gun to and from a game, carry it in a gun case. Not only is a gun case the safest means of transportation, it also naturally protects your gun (airsoft guns can be quite fragile) and makes a great place to store airsoft pistols and spare magazines. For many areas, a gun case is the only way to legally transport your airsoft gun. Remember, it is very difficult to visibly distinguish an airsoft gun from a real gun.

Many people are concerned about the use of airsoft guns in crimes. A criminal is a criminal and will use whatever means they can to break the law. I would prefer a less dangerous criminal with an airsoft gun to a criminal armed with a real gun and the capability to kill innocent people.

Don't let any of these safety issues scare you away. Airsoft is not a dangerous sport as long as everyone playing understands safety. If you can not follow these rules, please try another outdoor sport. When everyone follows the rules, airsoft is just as safe as paintball. In 3 years of playing, I never saw any serious accident. On a few occasions a BB at close range has drawn blood, but that is rare. I have played in games with 50+ people without incident.

Last, but not least, before you play an airsoft game make sure that the airsoft teams you are playing with have strict rules concerning safety and feet per second limits for guns involved. Good Luck!

(Source: www. AirsoftgunHelp.com)

LLaawwss aanndd SSaaffeettyy::

Under Federal Law:

• Airsoft guns are not classified as firearms subject to the Gun Control Act. (However, in almost every major city and population center the definition of a firearm within their respected ordinances includes propulsion by spring or compressed air, thus subject to applicable laws.)

• A 6 mm minimum orange tip must be present on the barrel end of the airsoft gun to identify it as such for any commercial sales or transport. Once you own the airsoft gun, you may remove the orange tip in most areas, but local and state laws do vary.

• Airsoft guns' trademarks must be removed where the manufacturer does not have an existing license agreement with the "Real Steel" gun's manufacturer in the US. (Example: Classic Army has a licensing agreement with Arsenal Arms, so the trademarks can stay on imported replicas of Arsenal's SLR 105 A1. In practice enforcement is hit or miss. You might get an "unlicensed" gun through customs with Trademarks intact, while a Licensed gun might be held in Customs by an "under informed" customs agent.)

• In addition, the similarity between genuine firearms and airsoft replicas is close enough to provoke interaction with local law enforcement personnel if an airsoft gun is carried openly in public. If someone were to, for example, attempt a robbery with an airsoft gun, they would be charged as if the airsoft gun were a real firearm.

TTiippss:: BBeesstt WWaayy ttoo AAppppllyy CCaammoouuffllaaggee:: We’ve noticed that a lot of guys out there either look ridiculous with the camo they have on, or they just don’t know how to apply it so we thought we would give you all some advice on it. This is just a brief overview so we’ll discuss more in future issues.

Instructors at the U.S. Army Sniper School at Fort Benning, GA offer this advice on soldier's camouflage:

• When applying camouflage paint to your skin, work with a buddy. Apply a two or three color combination of camouflage in an irregular pattern. Face paint in wooded areas should be short vertical stripes, consistent with vegetation. Other terrain dictates locally consistent patterns to match.

• Paint shiny areas -- forehead, cheekbones, nose, ears, and chin -- with a dark color. Paint shadow areas -- around the eyes, under the nose and under the chin -- with a light color.

• Don't forget the back of the neck, arms and hands. Palms of hands are not normally camouflaged if arm-and-hand signals are not to be used. Remove all jewelry to further reduce shine or reflection.

• Study the terrain and vegetation and pick camouflage material that best blends with the area.

• Change camouflage as needed. When moving from one area to another, blend with the surroundings. Take grass, leaves, brush and other material from your location and apply it to your uniform and equipment and put face paint on your skin.

• Do not over-camouflage. Too much camouflage material may actually disclose a position. Get your camouflage material from a wide area. An area stripped of all or most of its vegetation may draw attention.

• Helmets. Camouflage your helmet with leaves, grass or sticks. Use strings, burlap strips or rubber bands to hold those in place. If there is no material for a helmet cover, disguise and dull helmet surface with irregular patterns of paint or mud.

• Uniforms. Add more camouflage to make the uniform blend better with the surroundings. To do this, put mud on the uniform or attach leaves, grass or small branches to it.

TTiippss:: GG33 MMeecchhbbooxx TTaakkeeddoowwnn

G3 Mechbox Takedown by Matt Bezkrovny:

Suggested Tools: Phillips head screwdriver Standard head screwdriver Tweezers (if handling hop up sleeve) Silicone lubricant (if handling hop up) Mini Screwdriver Set The G3 is a fairly simple gun to breakdown: that is one of the reasons I chose to add it to my collection. By following this guide, you will become as proficient as I am in disassembling this beast of a gun. This guide pertains to all G3 variant receivers including: the MC-51, G3 SAS, G3 SG/1, both CA SAR models, CA HK33E, and more. Although this is a TM SG/1 which has been highly modified, all of the elements of a standard G3 are still there. Now, for the guide:

First, we start by removing the two screws as seen above. Use a standard flathead screwdriver to unscrew both pins holding the stock together. There are two parts of the pin, the main body of the pin and the screw on pin heads, make sure to not loose either. (Photos 1-3)

Once the pins are out of the receiver and stock, pull the stock and stock cap from the receiver. The picture above shows the stock removed from the receiver. Remember, those are deans’ connectors so you will have clear plastic tamiya connectors. I will be writing a deans’ ultra connector installation guide soon. (Photo 4)

The next pin that has to be removed is the magazine well-receiver pin. This is what holds the two halves of the receivers together. Use a flathead to unscrew both sides of this pin and remove it. (Photo 5)

Once the pin is removed, pull the lower receiver (pictured as the top receiver) towards the rear of the gun and out. It should be a clean slide, with no obstructions. Make sure to not loosen the golden magazine catch cylinder, which is prone to falling out. (Photo 6)

Here are the two receiver halves split, the lower receiver is on top, the upper receiver is show on the bottom. (Photo 7)

Now: This portion of the guide will show how to get to the hop-up unit. If you just need to get to the gearbox, skip this portion. Inside the upper receiver is the hop-up, which is connected to the inner barrel. Just put your finger into the magazine well and push the hop-up chamber towards the rear of the gun. Then pull it with the inner barrel. (Photo 8)

Pull the hop-up adjustment dial from the hop-up unit. (Photo 9)

Remove the plastic hop-up clip that attaches the hop up to the inner barrel. (Photo 10)

Once the clip is off, pull the barrel out while turning it with the hop-up sleeve. Under the plastic lever on top should be the hop-up bucking. NEXT: This is the lower receiver removal portion of this guide. When we left off, we had this, the lower receiver with the gearbox, still attached. (Photo 11)

The screw that secures the alignment assembly to the gearbox must be removed by using a standard Phillips head screwdriver. (Photo 11-12)

The selector switch must now be removed. Use a mini-screwdriver, the smallest one in the set, to remove the screw. DO NOT LOSE THIS SCREW! When you have removed the screw and selector switch, make sure to put the screw back onto the selector switch, while it’s out of the lower receiver, to avoid losing it or misplacing it. Also, remove the right side selector dial once the switch has been removed. (Photo 13-14)

Next, we have to remove the motor plate which is at the bottom of the handgrip. The hex-screw in the middle is the motor adjustment screw and does not have to be touched now. Only the two Phillips head screws must be removed. (Photo 15)

This is the two Phillips screws removed, and the motor plate removed. Be wary of the motor adjustment plate, which is the small washer seen to the left of the motor plate. (Photo 16)

Next, remove the motor by disconnecting the two leads, and pulling the motor out. This is the picture of the motor removed. (Photo 17)

Next, we need to remove the handgrip from the lower receiver and gearbox. Remove the two magnetic screws at the bottom of the handgrip. A magnetic screwdriver is preferred, just in-case one falls out, you can easily reset it. (Photo 18)

Once the two screws have been completely unscrewed, just pull the handgrip diagonally off the receiver. When you put the motor grip back on, make sure the wires and screws go into the correct holes. The middle hole, which is the largest, is for the motor pinion gear and axle. (Photo 19)

Finally, after all of the above steps have been completed, pull the lower receiver off of the mechbox. It should be an easy slide! (Photo 20)

These are some pictures of the version 2 mechbox at gearbox level. (Photo 21-22)

This is the internal selector switch bracket. This small plastic piece is what moves the selector plate when the selector switch is moved to a different selection. Make sure you do not lose this, and put it in the right way. It should be put on the left side of the receiver. (Photo 23-24)

This is how the motor should be put back into the handgrip when you are done. Make sure the red positive lead matches with the red positive terminal. There should be a reference, like red paint, or a plus, like on my Systema motor. The circular, raised part of the motor (highlighted in blue/purple) is where the motor adjustment washer should be placed when sealing the handgrip. Once you are ready to put the gun back together, follow the steps in reverse order. (Photo 25)

Thank to Matt Bezkrovny “KrYpTiK” for writing this article and allowing us to use it! It was, with his permission, taken from his website: www.fubarairsoft.com/forums in the AEG section. It’s people like him that helps this magazine stand out. If you have an article on how to upgrade or do a modification to your gun, just send it our way at: usasoc_themagazine@hotmail.com (main editor’s email).

WWhhaatt’’ss nneexxtt iinn UU..SS..AA..SS..OO..CC –– TThhee MMaaggaazziinnee..:: What’s to come in the following issues of U.S.A.S.O.C. – The Magazine? Well, quite frankly…a lot! In the next issue, CQB tactics will be discussed, the Tokyo Marui M4-S System will be reviewed, more tips on how to do modifications to your guns including how to create a custom scope mount for your AEG, a new team interviewed, plus much more! Within a little bit, there will be sniper, CQB, outdoors tactics, and information sections. There will be more for you gas and spring airsofters including modifications, upgrades, reviews, and previews. Also, you will learn how to create a custom ghille suit for a small amount of money, while it still being a very effective suit. Those are only some of the things to come in U.S.A.S.O.C. – The Magazine. Again, this is our first issue so we are still learning too. So stick with U.S.A.S.O.C. – The Magazine and watch the magic happen!

Here, two AMSOG members take aim downrange on a target.

(Courtesy of AMSOG)

PPhhoottooss::

Thanks for all those who contributed to the photo section, especially AMSOG and W.T.A. If you would like to see yourself, or your team in here, please send all photos (as big as possible too) to: usasoc_themagazine@hotmail.com (main editor’s email). If no name is given after photo, then it is from our library of photos taken at events. Please note: all photos in the e-magazine were staged. That is why some people don’t have safety goggles and glasses on.

Ben “Farslayer” from AMSOG

Ben “Farslayer” from AMSOG

(Courtesy of W.T.A.)

(Courtesy of W.T.A.)

(Courtesy of AMSOG)

(Courtesy of AMSOG)

PPhhoottoo ooff tthhee IIssssuuee:: Thanks to the guys at WRAA (W.T.A.) for allowing us to use this photo. If you have a photo that you think is the “Photo of the Issue”, send it our way to: usasoc_themagazine@hotmail.com (main editor’s email).

UUppccoommiinngg EEvveennttss ffoorr NNoovveemmbbeerr 22000066::

Operation Ill WindOperation Ill WindOperation Ill WindOperation Ill Wind

www.TNairsoftEvents.com Lewisburg, TN (55 miles south of Nashville, TN – 60 Miles North of

Huntsville, AL) Nov. 4th, 2006

0700-1700

Open Registration starts Oct. 1st, 2006

Event costs $25, including a subdued operation shoulder patch.

Size of forces:

40 – US Rangers – US Woodland uniform 12 – US Special Forces – Tiger Stripe uniform

52 - Nigerian Army – All camouflage uniforms patterns except US Woodland or Tiger Stripe

To register or for any questions please visit our website:

www.TNairsoftEvents.com

Overview: State of Borneo, Nigeria, West Africa

The Bornoian leadership have finally had enough and decided to

break away from the troubled nation of Nigeria to form the nation of Borneo. Nigerian Muslims have vowed that the new nation ‘shall

never see the light of day’.

Ordinarily the United States would stay out of the matter, but NSA signal intercepts indicate that the Nigerians have acquired two

canisters of BA-PP3/I anthrax from the former Soviet Union and they are planning to release the bio-agent against the Bornoians.

The United States already has a Army Special Forces A-team

operating inside Nigeria and they have been ordered to cross the

border into Borneo. US Special Operations Command (USSOC) is mobilizing the 75th Ranger Regiment to support the Special Forces

A-team in suppressing the overwhelming Nigerian incursion.

Will the US stop the Nigerians from oppressing the Bornoians? Will the Nigerians be able to bring the Bornoians back into the fold? You

decide! Join the fight. Register now!

Operation Mercury:Operation Mercury:Operation Mercury:Operation Mercury:

This is a Mediterranean Theater of Operations themed game, covering Crete to Italy, 1941-43.

November 4th-5th, at Georgia Airsoft in Athens, GA. http://www.georgiaairsoft.com/

Entry fee is $35.00 Friday night, for the early arrivals, we will have open CQB games in

the illuminated 'town' area. Operation Mercury beings Saturday (11/4/06), 10AM-midnight, and

concludes Sunday (11/5/06), 9AM-1:30PM. As is usual there will be a raffle afterwards and 'costume' contest.

Please read the requirements/rules for this game here. http://www.worldwar2airsoft.com/rules.htm By attending this event, you agree to abide by these. This is a WWII airsoft event, designed by and for those players who have expressed interest in this type of play. One of the important factors in creating an immersive and enjoyable WWII scenario is the willingness of participants to take on a basic uniform appearance appropriate for the era in question. This event has very liberal Uniform Requirements, but these will be enforced. You must wear some sort of acceptable WW2-inspired uniform and headgear, or risk embarrassing yourself. If you're not sure what that might be, ask! Please also see the questions thread for further details. http://s176595924.onlinehome.us/teamblackjack/phpBB2/viewforum.php?f=47

We understand that, being a WW2-themed event, this will not be for everyone. Not everyone is willing to forego full automatic fire, past helmets, personal radios, and tactical vests, or put up with uniform requirements, fire mode restrictions, and what-have-you, and that is okay. For those who can handle it, we promise you an extremely enjoyable experience. Ask Black Company. A re-enactor grade kit is not required, they key is to look like a Yank, Limey, or Jerry from 30 feet away. That’s good enough for us. Sportsmansguide.com and the like are excellent sources for inexpensive, "close enough" gear. Peruse this forum for some suggestions, on the cheap. http://s176595924.onlinehome.us/teamblackjack/phpBB2/viewforum.php?f=41 Any weapon is also okay, just be expected to use it in semiautomatic only mode.

TTeeaammss:: Listed here are teams that we have found. If you would like to submit your team to be listed, just include: your team’s name and any contact info (website, location, email, etc). Please send it to: usasoc_themagazine@hotmail.com (main editor’s email). AMSOG: Location: Tucson, Arizona. Website: www.amsog.com Airsoft Team Rhino: Location: Las Vegas, Nevada. Website: www.airsoftteamrhino.com Centurion Aisoft Club: Location: Northern California. Website: www.airsoftcenturions.com Cimmerians: Location: San Francisco, California. Website: www.cimmerians.org Cobra Company: Location: Walworth County, Wisconsin bordering Illinois. Website: www.cobracompanywi.com Echo Squadron: Location: Southeastern Wisconsin. Website: www.echosquadron.com Fox Team Airsoft: Location: Green Bay, Wisconsin. Website: www.foxteamairsoft.cjb.net Ghost Strike: Location: Dayton, Ohio. Website: www.ghoststrike.cjb.net

Iron Cross Elite: Location: Wisconsin area. Website: www.ironcrosselite.com Mobile Militia Force-Alpha: Location: California. Website: www.teammmf-a.com Morgantown Airsoft: Location: Morgantown, West Virginia. Website: www.morgantownairsoft.com North Alabama Tactical Airsoft Command: Location: Huntsville, Alabama. Website: www.natac-airsoft.tk Rangers of NC: Location: Wilmington, North Carolina. Website: www.home.ec.rr.com/hybridiscool/ai/ River Rats: Location: Elgin City, Chicago. Website: www.riverratsairsoft.com South East Airsoft Legion: Location: Dade/Broward/West Palm Beach, Florida. Website: www.southeastairsoftlegion.net Strikers: Location: Ohio Website: www.teamstrikers.com Task Force Delta: Location: Northeast Wisconsin. Website: www.taskforcedelta.com Tactical Airsoft of Cleveland: Location: Cleveland, Ohio. Website: www.airsoftcleveland.com

Toledo Airsoft: Location: Toledo, Ohio. Website: www.toledoairsoft.com

AAiirrssoofftt RReellaatteedd WWeebbssiitteess::

Here’s a compacted list of airsoft related links. If you have one that you don’t see, please submit it to: usasoc_themagazine@hotmail.com (main editor’s email). Airsoft Alaska: www.airsoftalaska.com Airsoft Arizona: www.airsoftarizona.com Airsoft Cincinnati: www.airsoftcincinnati.com Airsoft Colorado: www.airsoftcolo.suddenlaunch3.com/index.cgi Airsoft Connecticut: www.airsoftct.com Airsoft Hawaii: www.airsofthawaii.com Airsoft Iowa: www.airsoftiowa.com Airsoft Kentucky: www.airsoftkentucky.com Airsoft Pacific: www.airsoftpacific.com Airsoft Teams.net: www.airsoft-teams.net Alabama Airsoft Forums: www.bbgunmilitia.proboards77.com Colorado Airsoft: www.coloradoairsoft.org Fubar Airsoft: www.fubarairsoft.com/forums Florida Airsoft: www.floridaairsoft.com Illinois Airsoft: www.illinoisairsoft.com Las Vegas Airsoft: www.lvairsoft.org

Lonestar Airsoft: www.austinairsoft.com Minnesota Airsoft Association: www.mnairsoft.org North Eastern Airsoft Group: www.neasg.org Seattle Aisoft: www.seattleairsoft.com Tennessee Airsoft: www.tnairsoft.com United States Federation of Airsoft Standards/FAST: www.fast-us.org Wisconsin Airsoft: www.wiairsoft.com

OOpp IIddeeaa:: Prisoners Of War

Thanks to airsoftbeastie for this great op idea. Credit for this goes to him. If you have an idea for an op, just send it our way to: npetrus@quixnet.net (main editor’s email).

Title: Prisoners Of War

1. Scenario: The Rangers are trying to save their fellow comrades

who are POWs; the insurgents are trying to move their POWs to

another base because they heard about the Rangers coming to save

them. The Rangers have two options: 1) they can save the POWs

while the insurgents are moving them to the other base. Or 2) they

can save them at the original base. Also, while the Rangers are

behind enemy lines there is a rumor that there is a large weapons

cache so they are requested to find it.

2. Setting: Woodland or Desert will work for this scenario.

3. Time: Should only last 45 minutes to an hour. That’s what the

average is for me and my friends.

4. You'll need 3 teams: Army Rangers*, Insurgents, and POWs.

There should be 4 Rangers, 4 to 5 Insurgents, and 2 POWS

6. Rules: The POWs can not be shot unless all of the Rangers die.

No re-spawns. POWs can only be shot with a spring gun.

7. Objectives:

Rangers: 1. Free the P.O.W.s

2. Eliminate all insurgents

3. Find weapons cache**

Insurgents: 1. Eliminate all soldiers

2. Execute the P.O.W.s

3. Protect weapons cache

POWs: There aren't any objectives for them.

8. Props: Toy guns for weapons cache.

Blindfolds for POWs (Optional…Not recommended.)

9. There are no ammo limits, and all guns must be under 400 fps

unless they are sniper rifles which can be 500 fps.

*= You can use another force if wanted.

**= Only if you want to have it.

FFiinnaall TThhoouugghhttss::

Happy Holidays!

Well there you have it…the first issue of U.S.A.S.O.C. – The Magazine I hope you truly enjoyed the e-magazine. One day, I would like to have this in newsstands everywhere, but U.S.A.S.O.C. – The Magazine still has a good ways to go till it gets there. Also, I would like to extend a Happy Thanksgiving and Happy Holidays to all the readers! U.S.A.S.O.C. – The Magazine would also like to thank all the troops, law enforcement, EMS, firefighters, and all others who bravely defend our freedom in America. Never forget that if it wasn’t for all of them, we wouldn’t be able to enjoy our freedom as much as we do now. So please keep in mind the troops, all the others listed, and their families when you spend the coming holidays with your families. U.S.A.S.O.C. – The Magazine is a proud supporter of all our troops! Also, come back January 1st, 2007 for the next issue of U.S.A.S.O.C. – The Magazine. We plan to kick off 2007 with an even better issue than this one so come back and see it then.

God Bless and Happy Holidays! Nick Petrus-Owner/Main Editor