1 Automotive Hose Catalogue - Mackay Consolidated · 2 Mackay Consolidated Industries Pty Ltd 2015 1 section Automotive Hose Catalogue \ UNIVERSAL “Z” HOSE ™ …

$Page 1: 1 Automotive Hose Catalogue - Mackay Consolidated · 2 Mackay Consolidated Industries Pty Ltd 2015 1 section Automotive Hose Catalogue \ UNIVERSAL “Z” HOSE ™ …$
2© Mackay Consolidated Industries Pty Ltd 2015

www.mackayrubber.com.au

Automotive Hose Catalogue 1

section

UNIVERSAL “Z” HOSE ™ BENDS � Universal Application for Water, Fuel & Oil and EFV � Covers majority of small bore market � Reduced Inventory

Mackay Universal Small Bore “Z” hose ™ bends, the only hose specially designed to provide the largest small bore application coverage from a few part numbers.

Unlike Radiator hoses, demand for small bore hoses can be relatively inconsistent, requiring an unjustifiably large range to cater for the varied shapes and sizes in the market.

Mackay Universal Small Bore “Z” hose ™ bends now solves this problem giving you the versatility to meet the majority of applications without high inventory costs. Combined with our application specific small bore range Mackay Hoses provide a superior and cost effective solution.

150mm

250m

m

150mm

Flexible through a wide range of angles and planes. Designed to give maximum applica tion coverage

ID mm ID Inches

Part No. Maximum Working Pressure

SAE Minimum Burst Pressure

Application

6mm 1/4” ZHB6

0.43 MPa 62 psi 1.72 MPa 249 psi Heater Hose SAE 20R3

8mm 5/16” ZHB8

10mm 3/8” ZHB10

12mm 15/32” ZHB12

16mm 5/8” ZHB15

19mm 3/4” ZHB19 0.35 MPa 51 psi 1.38 MPa 200 psi

25mm 1” ZHB25 0.24 MPa 35 psi 0.97 MPa 141 psi Radiator Hose SAE 20R4

6mm 1/4” ZHB6F

0.34 MPa 50 psi 1.72 MPa 250 psi

Low-Pressure Fuel & Oil Hose

SAE 30R6

8mm 5/16” ZHB8F

10mm 3/8” ZHB10F

12mm 1/2” ZHB12F

0.24 MPa 35 psi 1.20 MPa 175 psi16mm 5/8” ZHB16F

19mm 3/4” ZHB19F25mm 1” ZHB25F

6mm 1/4” ZHB6EFV

Vacuum / Vent Hose Emission Control, Fuel Vapour & PCV

8mm 5/16” ZHB8EFV

10mm 3/8” ZHB10EFV12mm 15/32” ZHB12EFV



Automotive Hose Catalogue 1section

“Z” HOSE ™ TRADE PACKS The revolutionary Mackay “Z” hoses ™ are now available in a two popular TRADE PACKS, Part Number ZBAG1 and ZBAG2.The ZBAG1 consists of one each of the top 5 “Z” water hoses and is especially suited as an introductory or replenishment stock pack for workshops. The ZBAG2 contains the additional larger ID 19mm and 25mm hoses.

“Z” Hose Trade Pack - 6mm to 15mm ID - Part Number ZBAG1

Part No. ID mm ID Inches

QTY In Pack

Application

ZHB6 6mm 1/4” 1

Heater Hose SAE 20R3

ZHB8 8mm 5/16” 1

ZHB10 10mm 3/8” 1

ZHB12 12mm 15/32” 1

ZHB15 16mm 5/8” 1

“Z” Hose Trade Pack - 6mm to 25mm ID - Part Number ZBAG2

Part No. ID mm ID Inches

QTY In Pack

Application

ZHB6 6mm 1/4” 1

Heater Hose SAE 20R3

ZHB8 8mm 5/16” 1

ZHB10 10mm 3/8” 1

ZHB12 12mm 15/32” 1

ZHB15 16mm 5/8” 1

ZHB19 19mm 3/4” 1

ZHB25 25mm 1” 1 Radiator Hose SAE 20R4

MackayFlex™ is a flexible water hose (Not suitable for oil, fuel applications) designed to suit universal Automo tive and Industrial applications. MackayFlex™ hoses can bend and flex in almost any direction and is an ideal replacement for unusual / emer gency applications or permanent use. Made from quality EPDM rubber, with textile reinforcement and rubber encapsulated steel inner spring construction.Suitable for Water Applications Working Temperature: -40 degrees C To +125 degrees C.Burst Pressure: According to SAEJ20R5 standardsPart Number Identification system:eg. Single ID 25254F = 25mm ID X 254mm Length Dual ID 3844558F = 38mm ID on one end, 44mm ID other end x 558mm Length.

MACKAYFLEX ™

MACKAYFLEX™ Dual ID

MackayFlex # ID 1 (mm)

ID 2 (mm)

Length (mm) (+20 /-0 mm)

3238304F 32 38 3043238406F 32 38 4063538304F 35 38 3043538406F 35 38 4063844355F 38 44 3553844457F 38 44 4573844558F 38 44 5584451304F 44 51 3044451406F 44 51 4065157304F 51 57 3045157406F 51 57 4065763304F 57 63 3045763406F 57 63 4066370304F 63 70 3046370406F 63 70 4067076304F 70 76 3047076406F 70 76 406

MACKAYFLEX™ Single ID

MackayFlex# ID (mm) Length (mm)(+20 -0 mm)

25254F 25 25425406F* 25 40625508F 25 50825609F 25 60932304F* 32 30432406F* 32 40632508F* 32 50832609F 32 60935406F 35 40638355F* 38 35538406F* 38 40638457F* 38 45738508F* 38 50844355F* 44 35544406F* 44 40644457F* 44 45744609F 44 60951203F 51 20351355F* 51 35551406F* 51 40651609F 51 60957254F 57 25457355F* 57 35557457F* 57 45757558F 57 55857660F 57 66057920F 57 92063254F 63 25463355F* 63 35563457F 63 45770254F 70 25470355F* 70 35570457F 70 45770558F 70 55876254F 76 25476355F* 76 35576457F 76 45776558F 76 558




section

MACKAYFLEX ™ MERCHANDISER MFM2The MackayFlex ™ Hose Merchandiser helps you easily display the top 18 MackayFlex ™ Hoses.

The Merchandiser includes a 18 hook rack (HR1), Header board and the 18 most popular MackayFlex hoses.

* Hoses included with Merchandiser (1 of each)All Dimensions Nominal




STRAIGHT HOSEMackay Universal Straight Hose is available in two specifications, one is suitable for water applications and the other is suitable for fuel and oil applications.

STRAIGHT HOSE – WATERThe straight moulded water hoses are suitable for use with plain water and automotive coolant applications.Manufactured using an electrochemical degradation (ECD) resistant EPDM rubber tube, lock-stitch knitted Rayon fibre reinforcement, with an EPDM rubber cover for heat, abrasion and ozone resistance. The 19mm ID size Exceeds Heater Hose Specification SAE J20R3 Type EC Class D-1 and D-2Sizes 22mm to 63mm ID Exceeds Radiator Hose Specification SAE J20R4 Type EC Class D-1 and Class D-2Working Temperature Range: -40°C to 125°C (-40°F to 257°F)Caution: Not suitable for fuel, oil transfer or brake fluid applications.

STRAIGHT HOSE - FUEL & OIL

ID mm ID Inches Part No. Length SAE 30R6 Maximum Working Pressure

SAE 30R6 Minimum Burst Pressure

25mm 1” SHF25 1m 0.24 Mpa 35 psi 1.20 Mpa 175 psi38mm 1 ½” SHF38 1m

0.11 MPa 16 psi 0.55 MPa 80 psi41mm 1 5/8” SHF41 1m51mm 2” SHF51 1m54mm 2 1/8” SHF54 1m57mm 2 ¼” SHF57 1m63mm 2 ½” SHF63 1m

ID mm ID Inches Part No. Length Maximum Working Pressure

SAE 20R3/R4 Minimum Burst Pressure

19mm 3/4” SHW19 1m 0.43 MPa 62 psi 1.72 MPa 249 psi22mm 7/8” SHW22 1m 0.24 MPa 35 psi 0.97 MPa 141 psi25mm 1” SHW25 1m28mm 1 1/8” SHW28 1m 0.23 MPa 33 psi 0.90 MPa 131 psi32mm 1 1/4” SHW32 1m35mm 1 3/8” SHW35 1m 0.21 MPa 30 psi 0.83 MPa 120 psi38mm 1 1/2” SHW38 1m41mm 1 5/8” SHW41 1m 0.19 MPa 28 psi 0.76 MPa 110 psi44mm 1 3/4” SHW44 1m48mm 1 7/8” SHW48 1m

0.17 MPa 25 psi 0.69 MPa 100 psi51mm 2” SHW51 1m54mm 2 1/8” SHW54 1m57mm 2 1/4” SHW57 1m 0.16 MPa 22 psi 0.62 MPa 90 psi63mm 2 1/2” SHW63 1m 0.14 MPa 20 psi 0.55 MPa 80 psi

STRAIGHT HOSE - WATER

STRAIGHT HOSE - FUEL & OILThe straight moulded fuel and oil hoses are suitable for fuel filler, turbo intercooler and low pressure fuel applications with leaded and unleaded petrol, Ethanol blended fuels up to E85, Diesel & Biodiesel fuels, lubricating oil as well as crankcase and fuel vapour applications.Manufactured using an OE developed Nitrile/PVC (NBR/PVC) blended rubber for the tube and cover chosen for its Fuel, Oil and ozone resistance, with a knitted high tensile strength Para-Aramid fibre reinforcement for maximum burst resistance. Exceeds Fuel Hose Specification SAE J30R6Working Temperature Range -34°C to 100°C (-29°F to 212°F)ATTENTION: Some sizes are non-stocked and made to order, minimum order quantities may apply. CAUTION: Not suitable for coolant transfer, brake fluid or marine applications.




section

A2

A1

RCentreline Radius

Internal Diameter

ID

45° UNIVERSAL HOSE BENDS - WATER

ID mm ID Inches

Part No. Arm 1 Centerline

LengthA1

Arm 2 Centerline

LengthA2

Maximum Working Pressure

SAE 20R4 Minimum Burst

Pressure

25mm 1” UHB25-300/45 300mm 300mm 0.24 MPa 35 psi 0.97 MPa 141 psi31mm 1 ¼” UHB31-300/45 300mm 300mm 0.23 MPa 33 psi 0.90 MPa 131 psi38mm 1 ½” UHB38-300/45 300mm 300mm 0.21 MPa 30 psi 0.83 MPa 120 psi44mm 1 ¾” UHB44-300/45 300mm 300mm 0.19 MPa 28 psi 0.76 MPa 110 psi50mm 2” UHB50-300/45 300mm 300mm 0.17 MPa 25 psi 0.69 MPa 100 psi57mm 2 ¼” UHB57-300/45 300mm 300mm 0.16 MPa 22 psi 0.62 MPa 90 psi63mm 2 ½” UHB63-300/45 300mm 300mm 0.14 MPa 20 psi 0.55 MPa 80 psi

90° UNIVERSAL HOSE BENDS - WATERID mm ID

InchesPart No. Arm 1

Centerline Length

A1

Arm 2 Centerline

LengthA2

Centreline Radius

R

Maximum Working Pressure

SAE 20R3/R4 Minimum Burst

Pressure

8mm 5/16” UHB8-300 300mm 300mm 50mm0.43 MPa 62 psi 1.72 MPa 249 psiUHB8-300X500 300mm 500mm

10mm 3/8” UHB10-300 300mm 300mm 50mmUHB10-300X500 300mm 500mm

13mm 1/2”UHB13 105mm 105mm

50mm 0.43 MPa 62 psi 1.72 MPa 249 psiUHB13-300 300mm 300mmUHB13-300X500 300mm 500mm

16mm 5/8”UHB16 105mm 105mm


19mm 3/4”UHB19 105mm 105mm


25mm 1”UHB25 105mm 105mm


31mm 1 ¼”UHB31 120mm 120mm


38mm 1 ½”UHB38 120mm 120mm


44mm 1 ¾”UHB44 140mm 140mm


50mm 2”UHB50 140mm 140mm


57mm 2 ¼”UHB57 170mm 170mm


63mm 2 ½”UHB63 170mm 170mm


UNIVERSAL HOSE BENDSMackay 45° & 90° Universal Hose Bends are available in two specifications, one is suitable for water applications and the other is suitable for fuel and oil applications.

45° & 90° UNIVERSAL HOSE BENDS - WATERThe 45° & 90° moulded water hoses are suitable for plain water and automotive coolant applications.Manufactured using an electrochemical degradation (ECD) resistant EPDM rubber tube, lock-stitch knitted Rayon fibre reinforcement, with an EPDM rubber cover for heat and ozone resistance. Sizes 8mm to 19mm ID Exceed Heater Hose Specification SAE J20R3 Type EC Class D-1 and D-2Sizes 25mm to 63mm ID Exceed Radiator Hose specification SAE J20R4 Type EC Class D-1 and Class D-2Working Temperature Range: -40°C to 125°C (-40°F to 257°F)CAUTION: Not suitable for fuel, oil transfer or brake fluid applications.




ID mm ID Inches


LengthA1

Arm 2 Centerline

LengthA2

SAE 30R6 Maximum Working Pressure


25mm 1” UHB25-300/45N 300mm 300mm 0.24 Mpa 35 psi 1.20 Mpa 175 psi31mm 1 ¼” UHB31-300/45N 300mm 300mm

0.11 MPa 16 psi 0.55 MPa 80 psi38mm 1 ½” UHB38-300/45N 300mm 300mm44mm 1 ¾” UHB44-300/45N 300mm 300mm50mm 2” UHB50-300/45N 300mm 300mm57mm 2 ¼” UHB57-300/45N 300mm 300mm63mm 2 ½” UHB63-300/45N 300mm 300mm

90° UNIVERSAL HOSE BENDS - FUEL & OIL

ID mm

ID Inches


LengthA1

Arm 2 Centerline

LengthA2

Centreline Radius

R

SAE 30R6 Maximum Working Pressure


Pressure

8mm 5/16” UHB8-300N 300mm 300mm 50mm 0.34 MPa 50 psi 1.72 MPa 250 psi10mm 3/8” UHB10-300N 300mm 300mm 50mm13mm 1/2” UHB13N 105mm 105mm 50mm

0.24 MPa 35 psi 1.20 MPa 175 psi

UHB13-300N 300mm 300mm16mm 5/8” UHB16N 105mm 105mm 50mmUHB16-300N 300mm 300mm19mm 3/4” UHB19N 105mm 105mm 50mmUHB19-300N 300mm 300mm25mm 1” UHB25N 105mm 105mm 50mmUHB25-300N 300mm 300mm31mm 1 ¼” UHB31N 120mm 120mm 60mm

0.11 MPa 16 psi 0.55 MPa 80 psi

UHB31-300N 300mm 300mm38mm 1 ½” UHB38N 120mm 120mm 60mmUHB38-300N 300mm 300mm44mm 1 ¾” UHB44N 140mm 140mm 70mmUHB44-300N 300mm 300mm50mm 2” UHB50N 140mm 140mm 70mmUHB50-300N 300mm 300mm57mm 2 ¼” UHB57N 170mm 170mm 85mmUHB57-300N 300mm 300mm63mm 2 ½” UHB63N 170mm 170mm 95mmUHB63-300N 300mm 300mm

45° UNIVERSAL HOSE BENDS - FUEL & OIL

45° & 90° UNIVERSAL HOSE BENDS - FUEL & OILThe 45° & 90° moulded Fuel & Oil hoses use two constructions depending on size.Sizes 8mm to 19mm ID are suitable for low pressure fuel applications and are manufactured using a Nitrile (NBR) rubber tube, lock-stitch knitted Polyester fibre reinforcement, with an oil resistant Hypalon® (CSM) rubber outer cover for maximum heat and ozone protection.Sizes 25mm to 63mm ID are suitable for fuel filler and turbo intercooler applications and are manufactured with an OE Grade Nitrile/PVC (NBR/PVC) blended rubber tube and cover for Fuel, Oil and ozone resistance, with a knitted high tensile strength Para-Aramid fibre for maximum burst protection. Both constructions are suitable for use with leaded and unleaded petrol, Ethanol blended fuels up to E85, Diesel & Biodiesel fuels, lubricating oil as well as crankcase and fuel vapour applications.Exceeds Fuel Hose Specification SAE J30R6Working Temperature Range -34°C to 100°C (-29°F to 212°F)ATTENTION: Some sizes are non-stocked and made to order, minimum order quantities may apply. CAUTION: This hose is not suitable for fuel injection, in-tank fuel submersion, coolant, brake fluid or marine applications.




section

ID mm

ID Inches

Part No. LENGTHA B

38mm 1 1/2" USH38 145 155

B

A

BLANKING CAPS

ID mm ID Inches

Part No. Application

10mm 3/8" BC10

Coolant13mm 1/2" BC1316mm 5/8" BC1619mm 3/4" BC19

BC13

19.5mm OD

13mm (1/2") ID

32mm

BC16

23.5mm OD

16mm (5/8") ID

36mmBC19

24.8mm OD

26mm

19mm (3/4") ID

BC10

16mm OD26mm

10mm (3/8")ID

Part No. OD of Spring mm

Smallest ID Hose it Suits

Biggest ID Hose it Suits

Length of Spring mm

CHS5G 29 31 38 450CHS53G 34 36 43 280CHS55G 34 36 43 350CHS56G 42 44 51 305CHS42G 42/47 Bell 44/50 Bell 51/56 Bell 370CHS35G 56 58 65 405

UNIVERSAL HOSE SPRINGS Galvanised springs for use in non- standard applications where the hose may be more susceptible to vacuum collapse.To insert spring into a hose lubricate with soapy water.

UNIVERSAL HOSE SPRINGS

U SHAPED UNIVERSAL WATER HOSE




HEATER HOSE

ID mm ID Inches

Part No. Length Packaging Maximum Working Pressure


6mm 1/4”HH62 2m Pack

0.43 MPa 62 psi 1.72 MPa 249 psiHH610 10m BoxHH620 20m BoxHH650 50m Coil



9.5mm 3/8” HH10TWX2* 2m Pack 0.43 MPa 62 psi 1.72 MPa 249 psiHH10TWX20* 20m Box



12.7mm 1/2”

HH13X1.5 1.5m Retail Pack

0.43 MPa 62 psi 1.72 MPa 249 psiHH1272 2m PackHH12710 10m BoxHH12720 20m BoxHH12750 50m Coil

15.9mm 5/8”

HH16X1.5 1.5m Retail Pack

0.43 MPa 62 psi 1.72 MPa 249 psiHH1592 2m PackHH15910 10m BoxHH15920 20m BoxHH15940 40m Coil

17.5mm 11/16”HH1752 2m Pack

0.43 MPa 62 psi 1.72 MPa 249 psiHH17510 10m BoxHH17520 20m Coil

19mm 3/4”HH19X1.5 1.5m Retail Pack

0.35 MPa 51 psi 1.38 MPa 200 psiHH192 2m PackHH1910 10m BoxHH1920 20m Coil

25.4mm 1” HH2545 5m Coil 0.30 MPa 44 psi 1.21 MPa 175 psiHH25420 20m Coil

HEATER HOSEMackay Heater Hose is formulated from rubber compounds developed for Original Equipment (OE) applications.Suitable for plain water and automotive coolant applications.Manufactured using an OE grade electrochemical degradation (ECD) resistant EPDM rubber tube, Rayon fibre spiral reinforcement, with an EPDM rubber cover for heat and ozone resistance.Exceeds Heater Hose Specification SAE J20R3 Type EC Class D-1 and D-2Working Temperature Range -40°C to 125°C (-40°F to 257°F)Caution: Not suitable for fuel, oil or brake fluid applications.*TW = Thin Wall made to Ford OE Specifications not SAE (Features 3mm wall thickness)




section

ID mm ID Inches

Part No. Length Packaging SAE 30R6 Maximum Working Pressure


4mm 5/32”FH1004X2 2m Plastic Bag

0.34 MPa 50 psi 1.72 MPa 250 psiFH1004X10 10m BoxFH1004X20 20m BoxFH1004X50 50m Coil



6mm 1/4”

FH6X1.5 1.5m Retail Pack

0.34 MPa 50 psi 1.72 MPa 250 psiFH1006X2 2m Plastic BagFH1006X10 10m BoxFH1006X20 20m BoxFH1006X50 50m Coil

8mm 5/16”



10mm 3/8”






0.24 MPa 35 psi 1.20 MPa 175 psiFH1016X10 10m BoxFH1016X20 20m Coil


0.24 MPa 35 psi 1.20 MPa 175 psiFH1019X10 10m BoxFH1019X20 20m Coil

FUEL & OIL HOSE

FUEL & OIL HOSE

Mackay Fuel and Oil Hose has been developed using materials from our experience as an Original Equipment Manufacturer (OEM).Suitable for low pressure fuel use with leaded and unleaded petrol, Ethanol blended fuels up to E85, Diesel & Biodiesel fuels, lubricating oil as well as crankcase and fuel vapour.Manufactured using a high quality Nitrile (NBR) rubber tube, knitted Polyester fibre reinforcement, with an oil resistant Nitrile/PVC (NBR/PVC) blended rubber outer layer for heat and ozone protection.Exceeds Fuel Hose Specifications SAE J30R6Working Temperature Range -34°C to 100°C (-29°F to 212°F)Caution: Not suitable for fuel injection, transmission cooler, in-tank fuel submersion, coolant transfer, brake fluid or marine applications.




ID mm ID Inches

Part No. Length Packaging SAE 30R9 Maximum Working

Pressure


Pressure

6mm 1/4”FIH6X1 1m Retail Pack

0.69 MPa 100 psi 6.2 MPa 900 psiFIH6502 2m Plastic BagFIH6505 5m Plastic BagFIH6510 10m Box

8mm 5/16”FIH8X1 1m Retail Pack

0.69 MPa 100 psi 6.2 MPa 900 psiFIH802 2m Plastic BagFIH805 5m Plastic BagFIH810 10m Box

9.5mm 3/8”FIH9502 2m Plastic Bag

0.69 MPa 100 psi 6.2 MPa 900 psiFIH9505 5m Plastic BagFIH9510 10m Box

FUEL INJECTION HOSE

FUEL INJECTION HOSEMackay Fuel Injection Hose is manufactured using the same materials and construction that we supplied as Original Equipment (OE) to the Australian automotive Industry.Suitable for withstanding the high pressures used in modern fuel injection systems and compatible with leaded and unleaded petrol, Ethanol blended fuels up to E85, Diesel & Biodiesel fuels, LPG vapour, lubricating oil as well as crankcase and fuel vapour applications.Manufactured using a Fluoroelastomer (FKM) inner lining chosen for its high heat tolerance, low permeation characteristics as well as its ability to handle alcohol and oxygenated fuels, this is then coated by an intermediate layer of Hypalon® (CSM) rubber, which is braided with Polyester fibre reinforcement for high burst strength, the final outer cover layer is an abrasion and oil resistant Hypalon® (CSM) rubber for maximum heat and ozone protection ensuring long service life.Exceeds Fuel Injection Hose Specification SAE J30R9Working Temperature Range -34°C to 135°C (-29°F to 275°F) and intermittent use at 150°C (302°F)CAUTION: This hose is not suitable for Methanol levels over 15%, in-tank fuel submersion, coolant, brake fluid or marine applications.

PVC HOSE

Mackay PVC Hose is constructed using an Ozone and UV resistant Polyvinyl Chloride (PVC) and reinforced for high pressure transfer of Air and Water. Mackay PVC Hose can also be used for short term low pressure transfer of Fuel and Oil. HOSE SPECIFICATIONS:

• Maximum Recommended Working Pressure for Air and Water: 101psi (0.7MPa)• Minimum Burst Pressure for Air and Water: 406psi (2.8MPa)• Working Temperature Range: -10°C to +60°C

APPLICATIONS:• Transfer of Air.• Transfer of Water.• Short term low pressure transfer of Fuel and Oil, such as carbureted lawn mowers.

Caution• NOT SUITABLE FOR DRINKING WATER.• NOT SUITABLE FOR LONG TERM CONTACT WITH FUEL OR OIL, OR SUBMERSION IN THESE LIQUIDS AS THE HOSE WILL GO BRITTLE.• NOT SUITABLE FOR HIGH PRESSURE FUEL APPLICATIONS.• NOT SUITABLE FOR FUEL TRANSFER IN ENCLOSED SPACES.• NOT SUITABLE FOR MARINE FUEL APPLICATIONS.

Part No ID mm ID Inch LengthPVC8X20 8 5/16” 20mPVC10X20 10 3/8” 20mPVC13X20 13 1/2” 20mPVC16X10 16 5/8” 10mPVC19X10 19 3/4” 10m




section

ID mm

ID Inches

Part No. Length Packaging

3mm 1/8”EFV1003X2 2m Plastic BagEFV1003X10 10m BoxEFV1003X20 20m Box

4mm 5/32”VH4X2 2m Retail PackEFV1004X2 2m Plastic BagEFV1004X10 10m BoxEFV1004X20 20m Box

5.5mm 7/32” EFV10055X2 2m Plastic BagEFV10055X10 10m Box

6mm 1/4”EFV1006X2 2m Plastic BagEFV1006X10 10m BoxEFV1006X20 20m Box

ID mm

ID Inches


8.8mm 11/32”BVH902 2m Plastic BagBVH905 5m Plastic BagBVH910 10m Box

12mm 15/32”BVH1202 2m Plastic BagBVH1205 5m Plastic BagBVH1210 10m Box

POWER BRAKE VACUUM HOSE

EMISSIONS CONTROL, FUEL VAPOUR & VACUUM HOSE

BRAKE BOOSTER VACUUM HOSEMackay Brake Booster Vacuum Hose is manufactured using the same materials and construction that we supplied as Original Equipment (OE) to the Australian automotive Industry.Suitable for the light duty vacuum brake applications found on Passenger Cars and Light Trucks.Manufactured using an oil and fuel vapour resistant Nitrile (NBR) rubber inner tube, high levels of Polyester fibre reinforcement for resistance to vacuum collapse, with an outer Hypalon® (CSM) cover material known for its excellent heat and ozone resistance.Exceeds Vacuum Brake Hose Specification SAE J1403 Type LWorking Temperature Range -40°C to 125°C (-40°F to 257°F)CAUTION: This hose is not suitable for coolant or brake fluid applications.

EMISSIONS CONTROL, FUEL VAPOUR & VACUUM HOSEMackay EFV Hose is manufactured using the same materials and specifications that we supplied to the local automotive Industry as Original Equipment (OE).It is constructed of a non-reinforced Nitrile/PVC (NBR/PVC) rubber tube that gives it resistance to crankcase fumes, Petrol, Diesel and Ethanol vapour while also providing protection against the aging effects of heat and ozone degradation.Manufactured to the original OE specifications this hose is suitable for emissions control, fuel vapour and vacuum applications as well as having the pressure capability required to regulate turbo control valves.Working Temperature Range -34°C to 125°C (-29°F to 257°F)Caution: This hose is not suitable for fuel, oil, coolant, or brake fluid applications.




ID mm

ID Inches

Part No. Length Packaging SAE J189 Maximum Working Pressure

SAE J189 Minimum Burst Pressure

8mm 5/16”

TPH8X2 2m Retail Pack

0.69 MPa 100 psi 6.9 MPa 1000 psiTPH802 2m Plastic BagTPH805 5m Plastic BagTPH810 10m BoxTPH820 20m Box

9.5mm 3/8”

TPH10X2 2m Retail Pack

0.69 MPa 100 psi 6.9 MPa 1000 psiTPH1002 2m Plastic BagTPH1005 5m Plastic BagTPH1010 10m BoxTPH1020 20m Box

TRANSMISSION COOLER & POWER STEERING RETURN HOSE

TRANSMISISON COOLER & POWER STEERING RETURN HOSEMackay Transmission Cooler and Power Steering Return Hose has been developed using materials from our experience as an Original Equipment Manufacturer (OEM).Suitable for use with transmission & power steering fluids.Manufactured using a Nitrile (NBR) rubber tube, with a knitted high tensile strength Para-Aramid fibre reinforcement for maximum burst protection, with an oil resistant Nitrile/PVC (NBR/PVC) rubber outer cover layer for heat and ozone protection.Exceeds Power Steering Return Hose Specification SAE J189Working Temperature Range -40°C to 120°C (-40°F to 248°F) average and 135°C (275°F) maximum peaksCAUTION: Not suitable for coolant, brake fluid or high pressure power steering line applications.

IN-LINE FILTERSUITABLE FOR TRANSMISSION COOLER & POWER STEERING RETURN HOSE APPLICATIONS

Part number ILF1010 is an In-Line filter that can be installed on the return line of any hydraulic Power Steering system or Automatic Transmission Cooler Line. Its design features a two stage filtering system that uses a large magnet to attract and trap fine metal particulates and a traditional filter to trap large nonmetallic particles that can naturally occur in hydraulic systems. It also includes a Safety Bypass so the flow of fluid is never inhibited even in a fully contaminated system. It fits standard 9.5mm ID (3/8”) Transmission Cooler & Power Steering return hose and comes with two hose clamps.




section

RADIATOR OVERFLOW HOSE Low pressure non reinforced hose made from EPDM, pro viding resistance to coolant additives and heat and ozone.

ID mm

ID Inches


8mm 5/16”OFH801 1m Plastic BagOFH810 10m BoxOFH820 20m BoxOFH8100 100m Box

10mm 3/8”OFH1001 1m Plastic BagOFH1010 10m BoxOFH1020 20m Box

ID mm

ID Inches

Part No. Length Packaging Maximum Working Pressure

SAE J1037 Minimum Burst Pressure

3.2mm 1/8” WT3.2X2 2m Plastic Bag

0.17 MPa 25 psi 0.70 MPa 102 psiWT3.2X10 10m Box

4.8mm 3/16” WT4.8X2 2m Plastic BagWT4.8X10 10m Box

6.3mm 1/4” WT6.3X2 2m Plastic BagWT6.3X10 10m Box

45° & 90° UHB Trade Pack - Part Number UBAG1Part No. ID mm ID Inches Arm Length QTY In Pack Application

UHB31 31mm 1 ¼" 120mm 1

Radiator Hose SAE 20R4

UHB31-300/45 31mm 1 ¼" 300mm 1UHB38 38mm 1 ½" 120mm 1UHB38-300/45 38mm 1 ½" 300mm 1UHB44 44mm 1 ¾" 140mm 1UHB44-300/45 44mm 1 ¾" 300mm 1UHB50 50mm 2" 140mm 1UHB50-300/45 50mm 2" 300mm 1

Heater Hose Trade Pack - Part Number HHPACK1Part No. ID mm ID Inches Length QTY In Pack Application

HH82 8mm 5/16" 2m 1Heater Hose SAE 20R3*

(*Excluding HH10T-WX2)

HH10TWX2 9.5mm 3/8" 2m 1HH102 10mm 3/8" 2m 1HH1272 12.7mm 1/2" 2m 1HH1592 15.9mm 5/8" 2m 1HH1752 17.5mm 11/16" 2m 1HH192 19mm 3/4" 2m 1

Fuel Hose Trade Pack - Part Number FHPACK1Part No. ID mm ID Inches Length QTY In Pack Application

FH1004X2 4mm 5/32” 2m 1Low-Pressure

Fuel & Oil Hose SAE 30R6

FH1005X2 5mm 3/16” 2m 1FH1006X2 6mm 1/4” 2m 1FH1008X2 8mm 5/16” 2m 1FH1010X2 10mm 3/8" 2m 1FH1013X2 13mm 1/2" 2m 1

TRADE PACKS

WINDSCREEN WASHER TUBING

RADIATOR OVERFLOW HOSE

WINDSCREEN WASHER TUBINGMackay Wiper Tubing is manufactured from EPDM which is resistant to ozone, heat and water swell. The tubing meets Spec. SAE J1037. This tubing is not suitable for conveying petroleum products.Working Temperature Range -40°C to 125°C (-40°F to 257°F)




Mackay offer two hose merchandisers to assist cus tomers to increase sales of Mackay hoses. These mer chandisers are designed to be used as a shop front display or to keep your entire hose range organised behind the counter. All merchandisers utilise the unique Mackay “Hang Ups” ™ plastic strap fitted to Mackay Hoses

Part No. HR1 Contains 1 x 18 hook rack

HOSE MERCHANDISERS

HR1- WALL MOUNTED MERCHANDISER

SOLVE YOUR HOSE STORAGE PROBLEMS

MACKAY HOSE RACK - HR3The Mackay HR3 rack now solves the problem of hose storage and organisation using a minimum of space. The HR3 rack is ideal for distributors, retailers and trade users and can be adopted for both behind the counter bulk storage requirements and shop front display purposes.Each HR3 metal rack can hold 14 different Mackay hoses, the racks simply slide on to a standard 25.4 mm (1” inch) square tube giving you total flexibility, you can install them anywhere, a back wall, inside a parts bin or incorporate it into your shop front dis play. You can space them out by simply sliding them along to suit your space needs. There is now no excuse for lost sales, keep the extensive range of Mackay hoses at hand and organised and stay ahead of your competitors.

Solid Metal panel for labels

Standard 25.4mm (1”) squareRHS section (Not Supplied)

385mm

110mm

915mm

120mm




section

FORD

Falcon /Fair-lane

1972-1979 2 Port HV5202M

Falcon XD-XF 6 Cyl 1979-1988 2 Port HV5217M

Falcon EA - AU 3.2, 3.9 & 4.0 Litre 1988-9/2002

2 Port HV5213M

Falcon EB 5 Litre V8 1991-1993ED 5 Litre V8 1993-1994EF 5 Litre V8 1994-1996AU 5 Litre V8 1998-2002

4 Port HV6315M

HOLDEN

AstraBarinaComboVexctra Vectra

TR 1.6, 1.8, 2.0 Litre 9/96-9/98SB 1.2, 1.4, 1.6 Litre 4/94-7/97SB 1.4 Litre 3/96-9/2002JR 2.0, 2.5 Litre 6/97-8/98JS 2.0, 2.2, 2.5, 2.6 Litre 9/98-12/02

3 Port HV2007M

Commodore VN-VT 3.8 Litre V6 1988-2000 4 Port HV5631M

Commodore VN-VY 8 Cyl 1988-2004 2 Port HV5217M

Commodore VZ V6 2004-2007 2 Port HV2005M

HEATER VALVE TAPS




Holden HQ - HZ 1971-1979 3 Port HV5104M

Holden HQ - HZ 1971-1980 2 Port HV5105M

JEEPCherokee XJ 4.0 Litre MX 6 Cyl 1993-2002 4 Port HV6315M

TOYOTA / LEXUSCamryLexus ES300

SXV10, VCV10R, 1992-1997VCVC10R,MCV20R

2 Port HV3020M

UNIVERSAL2 Port HV4008M




section

MACKAY VEHICLE HOSE PACKSNote! Only frequent replacement hoses from our available range are included in the packs. Please check pack contents list. Hoses not listed may be available separately.

Pack Contents:

PART # QTY APPLICATIONHOLDEN

CHVP6 - VL Commodore 3.0 Litre RB30 EFI 1986-88CH1545 1 Top HoseCH1546 1 Bottom HoseCH1964 1 Thermostat to Heater InletCH1977 2 Heater Hose CH3258 1 ByPass Hose Pipe 2 to Pipe 3CH3256 1 ByPass Hose Pipe 3 To Inlet ManifoldSHW6X1 1 Straight Hose x 1 MetreSHW6X2 1 Straight Hose x 2 MetresCHVP15- VP- VR Commodore 3.8 Litre V6 1991-94CH1759 1 Top HoseCH1643 1 Bottom HoseCH1779 1 Heater Hose Valve to HeaterCH1780 1 Heater Hose Heater to EngineCH1781 1 Water Valve to EngineCH1782 1 ByPass HoseCHVP7 - VN Commodore 3.8 Litre V6 1988-91CH1644 1 Top HoseCH1643 1 Bottom HoseCH1646 1 Engine To Water ValveCH1647 1 Water Valve to Heater InletCH1648 1 Heater Outlet to Water ValveCH1649 1 Water Valve To EngineSHW6X3 1 Straight Hose x 3 MetresCHVP50- VP- VR Commodore 3.8 Litre V6 1991-94 With ABSCH1848 1 Top HoseCH1643 1 Bottom HoseCH1779 1 Heater Hose Valve to HeaterCH2155 1 Heater Hose Heater to EngineCH1781 1 Water Valve to EngineCH1782 1 ByPass HoseCHVP8 - VS Commodore 3.8 Litre V6 1995-97CH1979 1 Top HoseCH1980 1 Bottom HoseCH2040 1 Water Valve To InletCH2041 1 Water Valve to Engine OutletCH2042 2 Heater To Water ValveCH3269 1 Throttle Body HoseCHVP3 - VT, VX, VU & Statesman WH 97 -02 3.8 Litre (L36) V6 12V OHV Naturally AspiratedCH2256 1 Top HoseCH2257 1 Bottom HoseCH2279 1 Heater Tap to Heater Core LowerCH2282 1 Heater Tap to Heater Core UpperCH2280 1 Lower Heater Tap to Engine InletCH2277 1 Engine Outlet to Upper Heater TapCHVP53 Commodore VT, VX, Statesman WH 97-02 3.8 Litre (L67) V6 12V OHV SuperchargedCH2264 1 Top HoseCH2257 1 Bottom HoseCH2277 1 Heater Hose, Engine Outlet to Upper

Heater Tap

PART # QTY APPLICATIONCH2279 1 Heater Hose, Heater Tap to Heater Core

LowerCH2280 1 Heater Hose, Lower Heater Tap to Engine

InletCH2282 1 Heater Hose, Heater Tap to Heater Core

UpperCH3061 1 ByPass Hose, Pipe to Thermostat HousingCH3269 1 ByPass Hose, Throttle Body to Super-

chargerCHVP5 - VY Commodore V6 Non Supercharged 2002-04CH3318 1 Top HoseCH2257 1 Bottom HoseCH2279 1 Water Valve To Heater UpperCH2282 1 Water Valve To Heater LowerCH2280 1 Heater HoseCH2277 1 Inlet Hose To Heater TapCHVP42 - Jackaroo 98-3/99 3.0 Litre T/DieselCH2459 1 Top HoseCH2999 1 Bottom HoseCH2458 1 Heater Hose OutletCH2460 1 Heater Hose InletCHVP43 - Jackaroo 4/99-ON 3.0 Litre T/DieselCH2459 1 Top HoseCH3000 1 Bottom HoseCH2458 1 Heater Hose OutletCH2460 1 Heater Hose InletCHVP44 - Jackaroo 88-92 2.8 Litre T/DieselCH2819 1 Top HoseCH2841 1 Bottom HoseCH2766 1 ByPass Hose Pipe to ThermostatCH2843 1 Heater Hose Pipe to water manifoldCH2844 1 Heater Hose to engineCH2766 1 Heater hose Engine to HeaterCH2842 1 Heater Hose to pipe

FORDCHVP9- XF Falcon 3.3 & 4.1 Litre EFI Only 1984-88CH1385 1 Top Hose (With A/C)CH968 1 Bottom HoseCH1671 1 Heater Hose (Heater to T Piece) to 1/88CH1672 1 Heater Hose (Water Pump to H Piece)CH1665 1 Heater Hose (Cyl Head to Adaptor)CH1663 1 Heater Hose (H Piece to Stop Valve)CH1664 1 Heater Hose (Stop Valve to Heater)CH1673 1 Heater Hose (Heater To Adaptor)CHVP14 - EA-EB Falcon 3.9 Litre 6 Cyl 1988-92CH1605 1 Top HoseCH1606 1 Bottom HoseCH1626 1 Hose- Heater to Pipe (Multi Point E.F.I.)CH1627 1 Hose - Water Valve to heater (Multi Point

E.F.I.)SHW9.5x2 1 Straight Hose 9.5mm x 2 metresCHVP2 - EA-EB Falcon 3.9 Litre 6 Cyl 1988-92CH1605 1 Top HoseCH1606 1 Bottom Hose




PART # QTY APPLICATIONCH1624 1 Hose-Water Valve to Heater Core (Single

Point E.F.I.)CH1623 1 Hose-Manifold to Water Valve (Single Point

E.F.I.)CH1625 1 Hose- Heater to Water Pump (Single point

E.F.I.)SHW9.5x2 1 Straight Hose 9.5mm x 2 metresCHVP18 - EB II-ED Falcon 4 Litre 6 Cyl 2/92-1994CH1771 1 Top HoseCH1788 1 Bottom HoseCH1626 1 Hose- Heater to Pipe (Multi Point E.F.I.)CH1627 1 Hose - Water Valve to heater (Multi Point

E.F.I.)CH2248 1 Hose- Radiator to Header Tank SHW9.5x2 1 Straight hose 9.5mm x 2 metresCHVP11 - EF-EL Falcon 4.0 Litre 6 Cyl 1994-98CH1944 1 Top HoseCH1945 1 Bottom HoseCH1946 1 Heater Hose with end fittingCH1627 1 Heater HoseCH2471 1 Heater Hose Tap To PipeCH2160 1 Recovery Tank to Radiator HoseSHW9.5x2 1 Straight Hose 9.5mm x 2 metresCHVP10 - AU Falcon 4 Litre 6 Cyl 1998-2002CH2473 1 Top HoseCH2475 1 Bottom HoseCH2476 1 Radiator Supply TankCH2456 1 Crankcase Vent HoseCH2471 1 Heater hose Tap To PipeCH1627 1 Heater Hose valve to heater (MPFI)SHW9.5x2 1 Straight Hose 8.5mm x 2 metresCH1946 1 Heater Hose with FittingCHVP51 - BA/BF Falcon 9/2002 - 4/2008 4.0 Litre Barra Turbo & Non Turbo (Suits Heater Hose With T-Piece)CH3304 1 Supply Tank HoseCH3300 1 Bottom HoseCH3312 1 Crankcase Vent HoseCH3299 1 Top HoseCH3386 1 Heater Hose with T PieceCH3329 1 Heater Hose SHW9.5X2 1 Straight 9.5mm ID Hose x 2 metresCHVP52 - BA/BF Falcon 9/2002 - 4/2008 4.0 Litre Barra Turbo & Non Turbo (Suits Heater Hose Without T-Piece)CH3304 1 Supply Tank HoseCH3300 1 Bottom HoseCH3312 1 Crankcase Vent HoseCH3299 1 Top HoseCH3330 1 Heater Hose without T PieceCH3329 1 Heater Hose SHW9.5X2 1 Straight 9.5mm Hose x 2 metresCHVP16 - Laser KC/ MAZDA 323 1.6 Litre 1987-90CH1501 1 Top HoseCH1533 1 Bottom HoseCH1840 1 ByPass HoseCH1847 1 Heater Hose Engine to HeaterCH1845 1 Heater Hose Heater to EngineCHVP40 - Courier/ Mazda Bravo 96-98 2.8 Litre DieselCH2579 1 Top HoseCH2561 1 Bottom HoseCH2572 1 ByPass HoseCH2255 1 Heater HoseCH2569 1 Heater HoseCHVP39 - Courier/ Mazda Bravo 99-02 2.5 Litre T/D CH3375 1 Top HoseCH3372 1 Bottom Hose

PART # QTY APPLICATIONCH3369 1 ByPass HoseCH3383 1 Heater HoseCH3371 1 Heater HoseCH3381 1 Heater Hose

TOYOTACHVP12 - VDV10 Camry 3.0 Litre V6 2/93-95CH1816 1 Top HoseCH1817 1 Bottom HoseCH1973 1 Heater Hose Inlet To ValveCH1974 1 Heater Hose OutletCH1976 1 Heater Hose Tap to Heater CHVP1 HiLux LN86-106 2.8 Litre Diesel 8/88-8/94 (w/out p/stg)CH2014 1 Top HoseCH2006 1 Bottom HoseCH3528 1 Heater HoseCH3071 1 ByPass HoseCH3530 1 Heater HoseCH3527 1 heater HoseCH3526 1 Heater HoseCH3529 1 Heater HoseCHVP17 HiLux LN86-106 2.8 Litre Diesel 8/88-8/94 (with p/stg)CH2014 1 Top HoseCH2010 1 Bottom Hose Pipe to Engine No 2 CH2011 1 Bottom Hose Radiator To Pipe No1 CH3528 1 Heater HoseCH3071 1 ByPass HoseCH3530 1 Heater HoseCH3527 1 heater HoseCH3526 1 Heater HoseCH3529 1 Heater HoseCH3531 1 Heater Hose No 3CHVP35- HiLux LN147R 3.0 Litre 5LCH2680 1 Bottom Hose pipe to blockCH2697 1 Bottom Hose radiator to pipeCH2690 1 Heater Hose Inlet BCH2689 1 Heater Hose Inlet ACH2997 1 Heater Hose outlet ACH2691 1 Heater Hose outlet BCH2679 1 Top HoseCHVP36 - HiLux LN172 3.0 Litre 5L & 5LE Engines 1997-03CH2680 1 Bottom Hose pipe to blockCH2998 1 Bottom Hose radiator to pipeCH2690 1 Heater Hose Inlet BCH2689 1 Heater Hose Inlet ACH2997 1 Heater Hose outlet ACH2691 1 Heater Hose outlet BCH2679 1 Top HoseCHVP37- HiLux KZN165R 1999-05 3.0 Litre T/DieselCH4181 1 Top HoseCH4182 1 Bottom HoseCH4184 1 Heater Hose OutletCH4183 1 Heater Hose ACHVP45- HiLux LN130 1989-96 2.8 Litre DieselCH2014 1 Top HoseCH2011 1 Bottom HoseCH2010 1 Bottom HoseCH3529 1 Heater Hose Outlet BCH3526 1 Heater Hose Inlet BCH3527 1 Heater Hose Outlet ECH3530 1 Heater Hose Inlet CCH3528 1 Heater Hose Outlet ACH3071 1 Heater Hose Inlet ECH3531 1 Heater Hose Inlet A




section

PART # QTY APPLICATIONCHVP38- HiLux LN167R 1997-2003 3 Litre 5L & 5LE EnginesCH2679 1 Top HoseCH2680 1 Bottom Hose Pipe to EngineCH2998 1 Bottom Hose Radiator to PipeCH4618 1 Bottom Hose Radiator to pipe 10/00-03CH4731 1 Heater HoseCH4729 1 Heater HoseCH2691 1 Heater Hose Outlet BCH2690 1 Heater Hose Inlet BCH2997 1 Heater Hose Outlet ACH2689 1 Heater Hose InletCHVP26 - Landcruiser HZJ105R 4.2 Litre Diesel with rear Heater 1/98-ON CH3079 1 ByPass Hose 1CH2001 1 Top HoseCH3046 1 Heater Hose Inlet ACH3075 1 ByPass Hose 2CH2526 1 Bottom HoseCH3045 1 Heater Hose Inlet BCHVP25 - Landcruiser HZJ105R 4.2 Litre Diesel w/out rear Heater 1/98-ON CH3079 1 ByPass Hose 1CH2001 1 Top HoseCH3046 1 Heater Hose Inlet ACH3075 1 ByPass Hose 2CH2526 1 Bottom HoseCH2875 1 Heater Hose Inlet BCHVP34 - Prado 90 Series 3.4 Litre V6 5VZ-FE 2003-2007CH4198 1 Heater Hose Inlet CCH4200 1 Heater Hose Outlet BCH4199 1 Heater Hose Outlet ACH2213 1 Top HoseCH4216 1 Bottom HoseCHVP32 - Prado 120 Series 3.0 Litre 1KZ-TE T/Diesel 2003-07CH3728 1 Bottom HoseCH3740 1 Heater Hose ACH3738 1 Heater Hose BCH3739 1 Heater Hose CCH3729 1 Top HoseCHVP33 - Prado 120 Series 4.0 Litre V6 DOHC 1GR-FE 2003-07CH3753 1 Heater Hose ACH3757 1 ByPass Hose BCH3754 1 ByPass HoseCH3756 1 Heater Hose CCH3758 1 Heater Hose BCH3752 1 ByPass Hose B Sub AssemblyCH3750 1 ByPass Hose A Sub AssemblyCH3755 1 Bottom HoseCH3759 1 Top HoseCH3751 1 ByPass Hose A

MITSUBISHICHVP13 - TR-TS Magna 3.0 Litre V6 1991-96CH1820 1 Top HoseCH1822 1 Bottom Hose (Auto)CH2779 1 Heater Hose No. 1CH2723 1 Heater Hose No. 2CH2777 1 Thermostat ByPassHH82 1 Water Intake Pipe To ConnectorCHVP20 Pajero NJ 3.5 Litre V6 1996-97CH2501 1 Top HoseCH2454 1 Bottom HoseCH3505 1 Throttle Body Hose DCH3502 1 Heater Hose ACH3501 1 Heater Hose B

PART # QTY APPLICATIONCH3583 1 Water Line Hose 3CH3507 1 Throttle Body Hose CCH3506 1 Throttle Body Hose BCH3509 1 ByPass HoseCH3504 1 ByPass HoseCH3577 1 Water Line Hose 1CH3508 1 Throttle Body Hose ACHVP21 Pajero NJ 3.0 Litre V6 1993-96CH3947 1 Heater HoseCH3948 1 Heater HoseCH1711 1 Top HoseCH3581 1 ByPass HoseCH3584 1 ByPass Hose Throttle Body inletCH1712 1 Bottom HoseSHW7x1 1 Straight Hose x 1 MetreCHVP19 Pajero NJ 3.5 Litre V6 6G74 1995-96CH2455 1 Top HoseCH2454 1 Bottom HoseCH3505 1 Throttle Body Hose DCH3502 1 Heater Hose ACH3501 1 Heater Hose BCH3583 1 Water Line Hose 3CH3507 1 Throttle Body Hose CCH3506 1 Throttle Body Hose BCH3509 1 ByPass HoseCH3504 1 ByPass HoseCH3577 1 Water Line Hose 1CH3508 1 Throttle Body Hose ACHVP23 Pajero NP 3.5 Litre V6 6G74 2002-04CH4194 1 Heater Hose DCH4191 1 Heater Hose ACH4193 1 Heater Hose CCH4192 1 Heater Hose BCH3714 1 Top HoseCH3654 1 Bottom HoseCHVP22 Pajero NM 3.5 Litre V6 6G74 2000-2002CH4194 1 Heater Hose DCH4191 1 Heater Hose ACH4193 1 Heater Hose CCH4192 1 Heater Hose BCH3714 1 Top HoseCH3654 1 Bottom HoseCHVP24 Pajero NP 3.2 Litre Turbo Diesel 2005-ONCH3762 1 Top HoseCH3767 1 Bottom HoseCH3765 1 Heater Hose ACH3766 1 Heater Hose BCH3764 1 Heater Hose CCH3763 1 Heater Hose DCH3770 1 Heater Hose ECH4193 1 Heater Hose CCH4192 1 Heater Hose BCH3714 1 Top HoseCH3654 1 Bottom Hose

NISSANCHVP27 Patrol GU (Y61) 4.5 Litre TB45 1997-2000CH2743 1 Heater Hose OutletCH2744 1 Heater Hose Front No1CH2895 1 Heater Hose Front No3CH2745 1 ByPass HoseCH2748 1 ByPass HoseCH2747 1 ByPass HoseCH2742 1 Heater Hose B




PART # QTY APPLICATIONHH1272 1 ByPass Hose (Cut to Length)CH2746 1 ByPass HoseCH2740 1 Bottom HoseCH2739 1 Top HoseZHB8 1 ByPass HoseCH2741 1 heater Hose ACHVP28 Patrol GQ (Y60) 4.2 Litre TB42 (Carby only) 1988-97CH4262 1 Heater Hose Engine to HeaterCH1694 1 Bottom HoseCH3411 1 ByPass Hose Thermostat to EngineCH3410 1 ByPass Hose Intake to EngineCH3661 1 Heater Hose Heater to EngineCH1693 1 Top HoseCHVP29 Patrol GQ (Y60) 4.2 Litre TB42 (EFI only) 1988-97CH3119 1 ByPass Hose 2 (Engine to pipe)CH1694 1 Bottom HoseCH3117 1 ByPass Hose 3 to EngineCH3671 1 Heater Hose (engine to Heater)CH3120 1 Heater Hose ( Heater to Engine)CH1693 1 Top HoseCHVP46 Nissan Patrol GU Y61 3.0ltr ZD30 Diesel 02/2000- 08/2006CH3103 1 Top HoseCH3104 1 Bottom HoseCH3105 1 Intercooler HoseCH3106 1 Intercooler HoseCH3107 1 Intercooler HoseCH4866 1 Heater HoseCH4862 1 ByPass HoseCH4936 1 Expansion Tank HoseCHVP47 Nissan Patrol GU Y61 3.0ltr ZD30 Diesel 08/2006-ONCH4854 1 Top HoseCH4856 1 Bottom HoseCH4863 1 Heater HoseCH4855 1 Heater HoseCH4865 1 ByPass HoseCH4852 1 ByPass HoseCH4857 1 ByPass HoseCH4936 1 Expansion Tank HoseCHVP48 Nissan Patrol GU Y61 3.0ltr ZD30 Diesel 12/2009-ON CH4854 1 Top HoseCH4856 1 Bottom HoseCH3216 1 Heater HoseCH3212 1 Heater HoseCH4865 1 ByPass HoseCH4852 1 ByPass HoseCH4857 1 ByPass HoseCH4936 1 Expansion Tank HoseCHVP49 Nissan Patrol 2/2000-8/06 3.0 Litre DieselCH3103 1 Top HoseCH3104 1 Bottom HoseCH4866 1 Heater HoseCH4862 1 By Pass HoseCH4936 1 Expansion Tank HoseCHVP54 - Nissan Patrol GU Y61 3.0 Litre (ZD30DDTi) 4Cyl 16V DOHC Turbo Diesel 2000 - 2006CH3103 1 Top HoseCH3104 1 Bottom HoseCH4862 1 ByPass Hose, EGR Valve to EngineCH3212 1 Heater Hose, InletCH3216 1 Heater Hose, OutletCH5429 1 Expansion Tank Hose, Rad to Surge TankCH4866 1 Expansion Tank Hose, Surge Tank to

Heater Pipe

PART # QTY APPLICATIONUHB8-300 1 Various ByPass Hoses (Trim to Length)CHVP55 - Nissan Navara D22 3.0 Litre (ZD30DDT) 4Cyl 16V DOHC Turbo Diesel 2001 - 2008CH3745 1 Top HoseCH3743 1 Bottom Hose, Radiator to PipeCH5159 1 Bottom Hose, Pipe to EngineCH4862 1 ByPass Hose, EGR Valve to EngineCH5162 1 Heater Hose, Inlet, Engine to Bottom of

CoreCH3747 1 Heater Hose, Outlet, Top of Core to EngineCH5163 1 Expansion Tank Hose, Radiator to TankUHB8-300 1 Various ByPass Hoses (Trim to Length)




section

Documents

1 Automotive Hose Catalogue - Mackay Consolidated · 2 Mackay Consolidated Industries Pty Ltd 2015 1 section Automotive Hose Catalogue \ UNIVERSAL “Z” HOSE ™ …