8/10/2019 350 GSE [TAR. OPC.]

1/5

350 Series OptionsOptions Part Number

Output Relay Module (20-240VAC @ 1A) 24350B-100C1

Output Relay Module (5-60VDC @ 2A) 24350B-100C2

Analog Output Module 24350B-203B0

Battery Module (Install SS Encl. Only) 24350B-121B1

Battery Module (Install ZDC Encl. Only) 24350B-120B1

RS485 Networking Module 24660B-401A0

20mA Current Loop Module 24660B-404A0900 MHz, RF Communications Module Short Range (Install SS Encl. Only) 24660B-416C0

900 MHz, RF Communications Module Long Range (Install SS Encl. Only) 24660B-416C2

2.4 GHz, RF Communications Module (Install SS Encl. Only) 24660B-416C1

900 MHz, RF Short Range to PC Comm Port RS232, Desk or Panel Mount 24660B-417C0

900 MHz, RF Long Range to PC Comm Port RS232, Desk or Panel Mount 24660B-419C0

900 MHz, RF Short Range to PC USB Port, Desk or Panel Mount 24660B-418C0

900 MHz, RF Long Range to PC USB Port, Desk or Panel Mount 24660B-420C0

2.4 GHz, RF to PC Comm Port RS232, Desk or Panel Mount 24660B-417C1

2.4 GHz, RF to PC USB Port, Desk or Panel Mount 24660B-418C1

Cable, 8 in. connects Fiber Optic Port to RF Module (Install SS Encl. Only) 299290-43025

Coax Antenna Cable, 4 ft. 22-10-9500

Coax Antenna Cable, 1 ft. 22-10-9505Replacement Antenna 7 in. 41-40-3126

Panel Mount Kit (Install ZDC Encl. Only) 24350B-300C0

Swivel Bracket and Stand (Install ZDC Encl. Only) 24350B-301C0

Heavy Duty Swivel Bracket (Install ZDC Encl. Only) 24350B-301C1

Splash Guard (Model 350 SS) - sold in lots of 5 only 44-70-1020

Splash Guard (Model 355) - sold in lots of 5 only 44-70-41794

Dura Shield (Model 350 SS) - sold in lots of 5 only 31-70-35578

Dura Shield (Model 355) - sold in lots of 5 only 31-70-41793

Technical Reference Manual 39-10-42462

Power Cord Plug Style - Australia, Argentina, Bermuda, China, New Zealand 22-30-1022

Power Cord Plug Style - Chile and Italy 22-30-1023

Power Cord Plug Style - USA, Brazil , Canada, Mexico, Peru, Phil ippines, Venezuela 22-30-28586

DC Input Cable (Install ZDC Encl. Only) 22-30-35459

DC Input Cable (Install SS Encl. Only) 299290-36429

For additional information, see 350 Series Options on next page.

8/10/2019 350 GSE [TAR. OPC.]

2/5

Output Relay ModuleOne (1) output relay module can be installed in the 350 and 355.

* Option Mount Bracket is no longer required for the SS 350 and 355.

Specifications Part Number

3 N.O. outputs, 20-240VAC @ 1A, 24350B-100C1optically isolated, use with Stainless Steel or

Zinc Die Cast Indicators

Mounting: Hardware and cables included

3 N.O. outputs, 5-60VDC @ 1A, optically isolated 24350B-100C2

Analog Output ModuleOne (1) analog output module can be installed in the 350 and 355.

* Option Mount Bracket is no longer required for the SS 350 and 355.

Specifications Part Number Optically Isolated, 0-10 VDC or 0-20mA or 4-20mA 24350B-203B0

Resolution: 16 bit resolution

Mounting: Hardware and cables included

Battery ModuleStainless Steel Enclosure OnlyBattery module cannot be installed in the indicator enclosure when an output relay module or analog output module is installed.

Specifications Part Number NiMH (Nickel Metal Hydride) 12VDC, 1.3A Hr. 24350B-121B1

Recharge Circuit: Installs in indicator with battery

Smart-Charge circuitry automatically senses AC power

Battery Cycle: Cont. use: 20 hrs. LCD, 8 hrs. LED with (1) 350 ohm cell

Mounting: Hardware and cables included

Battery ModuleZinc Die-Cast Enclosure OnlyBattery module cannot be installed in the indicator enclosure when an output relay module or analog output module is installed.

Specifications Part Number

NiMH (Nickel Metal Hydride) 12VDC, 1.3A Hr. 24350B-120B1

Recharge Circuit: Installs in indicator with battery

Smart-Charge circuitry automatically senses AC power

Battery Cycle: Cont. use: 20 hrs. LCD, 8 hrs. LED with (1) 350 ohm cell.

Mounting: Hardware and cables included

Battery Type:

Battery Type:

No. of Outputs:

Output Range:

No. of Outputs:

8/10/2019 350 GSE [TAR. OPC.]

3/5

RS485 Networking ModuleWhen installed, the RS485 Networking Module replaces the RS232 port. Remaining communications ports are not affected.

The RS485 Networking Module and 20mA Current Loop Module cannot be installed together in one indicator.

Specifications Part Number

Converts RS232 Port communications to RS485 half or full 24660B-401A0

duplex. Multiple drop 251 devices up to 4000 feet (1200m) isolated

20mA Current Loop ModuleWhen installed, the 20mA Current Loop Module replaces the RS232 port. Remaining communications ports are not affected.

The RS485 Networking Module and 20mA Current Loop Module cannot be installed together in one indicator.

Specifications Part Number

Converts RS232 communications port to 20mA, TX-active or 24660B-404A0

passive, RX-Passive, 9600 baud max, 1000 foot loop max, isolated

Panel Mount KitZinc Die-Cast Enclosure Only

Specifications Part Number

Mounts a Model 350 Zinc Die Cast enclosure to a control panel 24350B-300C0

Mounting: Hardware included

Swivel Bracket and StandZinc Die-Cast Enclosure Only

Specifications Part Number

For 350 Zinc Die Cast enclosure only, standard on SS 350 and 355 24350B-301C0Mounting: Hardware and locking knobs

Heavy Duty Swivel Bracket Kit

Zinc Die-Cast Enclosure OnlySpecifications Part Number Thicker bracket for portable applications, reduces vibration 24350B-301C1

Kit includes bracket, non-skid pads, adjustment knobs

8/10/2019 350 GSE [TAR. OPC.]

4/5

8/10/2019 350 GSE [TAR. OPC.]

5/5

DC Input Cable for SS EnclosureSpecifications Part Number

Remote DC input cable, J-3 (4 pin IDC connector) to +/- pigtail 299290-36429

Cable length: 4" (10.2cm), splices to an existing DC source cable.

WARNING : If instrument AC line cord is also used,

a current limiting circuit must be installed to prevent

battery damage and/or explosion!

RF Communications Modules for SS EnclosuresDistance Specs: 900 MHz SR Indoor, 300 ft (90 m) up to 1000 ft (300 m)

900 MHz LR : Indoor 1500 ft (450 m), Outdoor Line of Sight: Up to 7 miles.

2.4 GHz : Indoor 600 ft (183 m), Outdoor Line of Sight: Up to 3 miles.

Specification Part Number

900 MHz, RF Communications Module Short Range, Installs in Indicators 24660B-416C0

900 MHz, RF Communications Module Long Range, Installs in Indicators 24660B-416C2

2.4 GHz, RF Communications Module, Installs in Indicators 24660B-416C1

900 MHz, RF Short Range to PC Comm Port RS232, Desk or Panel Mount 24660B-417C0

900 MHz, RF Long Range to PC Comm Port RS232, Desk or Panel Mount 24660B-419C02.4 GHz, RF to PC Comm Port RS232, Desk or Panel Mount 24660B-417C1

900 MHz, RF Short Range to PC USB Port, Desk or Panel Mount 24660B-418C0

900 MHz, RF Long Range to PC USB Port, Desk or Panel Mount 24660B-420C0

2.4 GHz, RF to PC USB Port, Desk or Panel Mount 24660B-418C1

Cable, 8 in. connects Fiber Optic Port to RF Module 299290-43025

(Required if Comm Port 1 is retained as an RS232 port)

Technical Reference ManualSpecifications Part Number

350 Series Operating and Programming Information 39-10-42462