Upload
kevin-mueller
View
268
Download
1
Embed Size (px)
Citation preview
7/24/2019 5000 0.362 S-135 NC50 VAM EIS 6625 3500 2 v3
http://slidepdf.com/reader/full/5000-0362-s-135-nc50-vam-eis-6625-3500-2-v3 1/3
Size:Connection:Pipe grade:Range:
NEW CLASS 2OD in 5 4.855 4.783Wall thickness in 0.362 0.290 0.253% Remaining body wall % 100 80 70
ID in 4.276 4.276 4.276
GradeCross sectional area in² 5.275 4.154 3.606
NEW CLASS 2
Connection NC50 VAM EISOD in 6-5/8 5-7/8 5-27/32Dual OD in 7-1/8 7-1/8 7-1/8
ID in 3-1/2 3-1/2 3-1/2
Box ton len th Lb in 11 11 11
Pin tong length (Lp) in 9 9 9
Make-u loss MUL in 5.126 5.126 5.126
Grade KSI 130 130 130
Sh to Sh length 31,7 ft Open end displacement 0,38 US gal/ft Approx weight 784 lbs Closed end displacement 1,08 US gal/ft Adjusted weight 24,69 lbs/ft Capacity 0,70 US gal/ft
NEW CLASS 2Tensile strength lbs 712,000 561,000 487,000Torsional strength ft-lbs 74,100 58,100 50,40080% Tors. strength ft-lbs 59,300 46,500 40,300Collapse pressure PSI 15,700 10,000 7,080Internal pressure PSI 17,100 15,600 13,700
NEW CLASS 2Tensile stren th lbs 1,200,000 1,200,000 1,200,000Torsional strength ft-lbs 68,200 47,800 46,200Maximum make-u tor ue ft-lbs 42,900 30,100 29,100Recommended make-up torque ft-lbs 40,900 28,700 27,700Minimum make-up torque ft-lbs 38,900 27,200 26,300
Balance OD in 6.256 6.256 6.256Torsional ratio TJ/pipe 0.92 0.82 0.92
Copie de PDS Rev 13 06F HTJ, 2012-03-05, 5000 1950 S-135 NC50 VAM EIS 6625 3500 3173 110 90 40.pdf
HANDLING HYDRAULICS
PIPE
All data nominal and calculated per standard methods. VAM Drilling does not assume responsibility
for results obtained through the use of this information. No warranty expressed or implied.
5 IEU X 19.50 lbs/ft
PIPE
S-135
NC50 VAM EIS
Performance Datasheet
TOOL JOINT
2
Hydroclean Max Drill Pipe
PREMIUM
PREMIUM
PREMIUM
PREMIUM
S-135
TOOL JOINT
DRILL PIPE DIMENSIONS & MATERIALS
DRILL PIPE ASSEMBLY DATA
DRILL PIPE MECHANICAL PERFORMANCES
7/24/2019 5000 0.362 S-135 NC50 VAM EIS 6625 3500 2 v3
http://slidepdf.com/reader/full/5000-0362-s-135-nc50-vam-eis-6625-3500-2-v3 2/3
Performance Datasheet Size:Connection:Pipe grade:Ran e:
Performances calculated with a friction factor and safety factor of 1.0
Copie de PDS Rev 13 06F HTJ, 2012-03-05, 5000 1950 S-135 NC50 VAM EIS 6625 3500 3173 110 90 40.pdf
All data nominal and calculated per standard methods. VAM Drilling does not assume responsibility
for results obtained through the use of this information. No warranty expressed or implied.
5 IEU X 19.50 lbs/ftNC50 VAM EISS-1352
Hydroclean Max Drill Pipe
AM Drilling provides a worldwide repair network and running assistance with AM Services and VAM Field Service International.
0
10 000
20 000
30 000
40 000
50 000
60 000
70 000
80 000
5-3/45-7/866-1/86-1/46-3/86-1/26-5/86-3/46-7/8
OD (in)
P i p e Y i e l d T o r q u e ,
T o o l J o i n t M a k e u p T o r q u e ( f t - l b s )
New, Premium,
Class 2 Drill Pipe
Tool Joint Premium
Tool Joint
0
200 000
400 000
600 000
800 000
1 000 000
1 200 000
1 400 000
0 10 000 20 000 30 000 40 000 50 000 60 000 70 000 80 000 90 000 100 000
Torque (ft-lbs)
T e n s i o n ( l b s )
New, Premium,
Class 2 Drill Pipe
Tool Joint Make-up Torque
DRILL PIPE COMBINED LOAD
DRILL PIPE WEAR
7/24/2019 5000 0.362 S-135 NC50 VAM EIS 6625 3500 2 v3
http://slidepdf.com/reader/full/5000-0362-s-135-nc50-vam-eis-6625-3500-2-v3 3/3
in lbsin lbsin s
in lbsin lbsin lbs
Copie de PDS Rev 13 06F HTJ, 2012-03-05, 5000 1950 S-135 NC50 VAM EIS 6625 3500 3173 110 90 40.pdf
2,702,70
Slip Length
1116-1/2
2,70
Friction Factor
5 IEU X 19.50 lbs/ft
0,08
NC50 VAM EISS-1352
AM Drilling provides a worldwide repair network and running assistance with
0,080,08
431,000
Performance Datasheet
Hydroclean Max Drill Pipe
567,000
Size:Connection:Pipe grade:Range:
ransverse Load
Factor
Slip Crushing Load
Slip Crushing Load
16-1/2505,000
552,000
11
602,00022
All data nominal and calculated per standard methods. VAM Drilling does not assume responsibility
for results obtained through the use of this information. No warranty expressed or implied.
Spiri and Reinhold, "Why Does Drill Pipe Fail in the Slip Area", World Oil, October 1959.
AM Services and VAM Field Service International.
Slip Length
22507,000
SLIP CRUSHING LOAD
ELEVATOR CAPACITY
0
200 000
400 000
600 000
800 000
1 000 000
1 200 000
1 400 000
5-3/45-7/866-1/86-1/46-3/86-1/26-5/86-3/46-7/8
Hydroclean OD (in)
T e n s i o n
( l b s )
100 ksi Shoulder Contact Pressure,
5-1/4 Elevator ID
100 ksi Shoulder Contact Pressure,
5-9/32 Elevator ID
65 ksi Shoulder Contact Pressure,
5-1/4 Elevator ID
65 ksi Shoulder Contact Pressure,
5-9/32 Elevator ID
New, Premium,Class 2 Drill Pipe
Tool Joint Tensile Capacity