HEIN, LEHMANNTRENN- UND FÖRDERTECHNIK GMBH

Circular motion screening machine

type DUK

Delta 2The solution to your screening problems

• Screening of sticky materials

• Reclamation of stock piles

• Screening without pegged or blinded screen decks

• Maximum Grain size up to 300 mm

• Cut points 15 mm and above

α

β

Κ

L

Unlike conventional circular motion

screening machines, the Delta 2

operates with a G-force in excess of

6. This enables the machines in this

series to work very efficiently and withmaximum flexibility.

The two eccentric shafts are

controlled in parallel by frequencyconverter to ensure that they are

synchronised, this also enables the

machine to be adjusted to differing

duties and product parameters.

Compared with conventional

screening machines, the Delta 2

offers:

- up to 40 % smaller screen area or

- up to 40 % more capacity with thesame screen area.

75001750203559279,0DUK 1,8-5,0 /DD

1620020502235863518,0DUK 2,4-7,5 /DD

facts only for doubledeck screening machines

If required available as single or 2 1/2 deck machine

1480020502235813516,8DUK 2,4-7,0 /DD

1350019502235693514,4DUK 2,4-6,0 /DD

1380020502235843515,75DUK 2,1-7,5 /DD

1305020502235793514,7DUK 2,1-7,0 /DD

1120018502135693512,6DUK 2,1-6,0 /DD

1212020502235793513,5DUK 1,8-7,5 /DD

1125020502235793512,6DUK 1,8-7,0 /DD

952018502135693510,8DUK 1,8-6,0 /DD

86501850213569359,0DUK 1,5-6,0 /DD

74501750203559357,5DUK 1,5-5,0 /DD

50001550180049356,0DUK 1,5-4,0 /DD

weight[kg]

height C[mm]

height B[mm]

length A [mm]

surface[m²]

DELTA 2type

The dynamic parameters of the Delta 2

screening machine are designed that the

throw of a particle is exactly twovibrations of the machine (circular

motions).

The material is being controlled whilst

travelling over the screen deck.

Circular motion – screening machinetype DUK - Delta 2

HEIN, LEHMANNTRENN- UND FÖRDERTECHNIK GMBH

Alte Untergath 40 D-47805 Krefeld

Phone ++49 2151 – 375 5

Fax ++ 49 2151 – 375 905

Email vtm@heinlehmann.de

Internet www.heinlehmann.de