8/11/2019 73282
1/8
C20
3pcs
A
A
B
B
P-3 Orion self adhesive73 2821/72 scale detail set for kit sada
detail pro model 1/72REVELL REVELL
ORIGINAL KIT PARTSPVODN DLY STAVEBNICE
PHOTO-ETCHED PARTSLEPTAN DLY
PARTS TO BE REMOVEDDLY K ODSTRANN
FILLTMELIT
e u r
REMOVE
ODSTRANIT
OPTION
VOLBA?REPLACENAHRADIT
BEND
OHNOUT
GRIND
OBROUSIT
SYMETRICALASSEMBLYSYMETRICK MONT
DRILL HOLE
VRTAT OTVOR
APPLY EXPRESS MASK AND PAINT BEFORE GLUINGPOUT EXPRESS MASK
NABARVIT PED SLEPENM
1/8 73 282
plastic
0,5x0,5mm
REFEREN ES
IPMS Deutschland
2
1
77
6 6
4
55 ?
3
2pcs
22 24
24
8
83
20
23
23
9
19
12
12
16
16
18
11
10
C2
C34
8/11/2019 73282
7/8
2. Do not inadvertently place etched componets on anunwanted
surface. Attempts to remove will result in
damage to your part.2. Nepokldejte samolepc dly na voln plochy.
Pokud
je omylem pilepte, pi pokusu o odlepen dojde kpokozen dlu.
3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na sti dl, na kterch je naneseno lepidlo.
1. Separate the etched components from their frames on
theprotective paper. Removal from the paper is done only
afterseparation of the parts from the frames.
1.Samolepc dly oddlujte od rmeku na podkladovmpape. Po oddlen je
sejmte z krycho papru.
4. Hold the parts by the edges, or at areas free of
adhesive.
4. Samolepc dly berte za hrany nebo za sti, na kterchnen nanesen
lepidlo.
5. Lightly place the component in the desired location
andposition. Adjust as required. The component will bypermanently
affixed when pressed onto its intendedlocation, its location can be
adjusted.
5. Dl lehce polote do pozice, ve kter m bt nalepen.Upravte
pesnou pozici a pimknte. Dl dokonale pilne
a po pimknut, ped pimknutm lze dlem opatrnmanipulovat.
1/72 scale detail set for kit sada detail pro model 1/72REVELL
REVELL
P-3 Orion self adhesive
7/8 73 282
