www.reachtest.com* Specifications subject to enhancement

CAN LoggerLive monitoring of all eight channels at 1 Mbps with protocol decoding.Recording of eight channels at 1 Mbps.

■ Logging • 3.5GB Internal Storage • 128 CAN Msg ID filter • Timestamped Data - 100ns resolution - IEEE-1588 (optional) • Start/Stop Events: - Power-on - Switch inputs (Ignition) - CAN Message■ Power • 9 - 36 VDC 3 Watts • Isolated (2500 VRMS UL 1577) • Reverse polarity protected • Low-power standby mode • Fast Start - 25 mSec■ Environmental • -40°C to +85°C • 5 - 98% Humidity • Ruggedized / Encapsulated

Height: 5.3″ - 135 mmWidth: 5.9″ - 150 mmDepth: 1.2″ - 30 mmWeight: 1.0 lbs - 450 g

PC Based Logger Software■ Included (no extra costs)■ Windows 7 / 8 / 10■ Multiple Loggers simultaneously■ Upload recorded data • ASC Export (CANalyzer) • CSV Export (Matlab / Excel) • Post recording visualization ■ Live Monitoring • Protocol Support • Multi-Network visualization

™

™

■ Communication [control / status / live monitoring) • USB • Ethernet • WiFi • External Modem (3G/4G Cellular / Iridium)■ Data [recording / live monitoring] • 8x Isolated CAN 2.0A/B up to 1 Mbps • 2x Analog (0-20V / 0-40V) • 2x Debounced switches • 8x Digital Inputs • External GPS Input■ Outputs [status / control] • 2x Relay • 8x Digital • 1x Differential Sync

:

■ Visualization • Live and Recorded data • Message View - Protocol validation • Table / Chart Views - Protocol decoding - CANdb signal definition■ Protocols • CANopen • J1939 • NMEA 2k

8-Channel CAN LoggerReach Technologies Inc. has leveraged 20 years of test and measurement product development experience into its CAN Logger. The CAN Logger provides continuous recording and live monitoring of CAN data from eight networks. The logger supports both passive connection to vehicle networks and active connection to data acquisition networks.

* Specifications subject to enhancement www.reachtest.com

Logger Control and Configuration

Connect to multiple loggers ■ View logger status ■ Update logger configuration ■ Copy configurations between loggers ■ Simplified logger configuration tools: - LED status display on each network - Autobaud - Error conditiion display - Verify expected CAN messages using live message view ■ Transfer recorded data from logger to PC ■ Upgrade logger and CAN device firmware

Data Visualization - Recorded and Live Data

The Message, Table and Chart views may be applied to both live and recorded data ■ View CAN messages with protocol decode - J1939, CANopen, NMEA 2K - Protocol violations flagged ■ View signal data contained in CAN messages - Signal data extracted using CANdb files - Handles large messages J1939 - BAM, RTS/CTS NMEA2k - Fast Packet ■ Table displays - Out of range signals highlighted - Enumerated signal values displayed as text ■ Chart displays - Manual / Auto Y-Axis scaling - Distributed / overlayed traces

Recordings

Store, Export and Archive recorded data ■ Transfer recorded data from logger to PC ■ Logger data is linked to the source logger ■ Recordings include all information required to analyze the data: - time tagged raw CAN messages - CANdb signal definition files - Logger info (data rate, channel name, etc.) ■ Export recorded data to third party tools - select time slice and network(s) for export - CSV format (signal and message data) - ASC format (message data) ■ Archive recordings in compressed files - suitable for transfer to third parties

Octopus Logger SoftwareThe CAN logger comes with a software package that simplifies the task of configuring both vehicle and data collection networks.