Upload
others
View
16
Download
0
Embed Size (px)
Citation preview
浴室防水与贴砖
WATERPROOFING & TILING IN
1 DAY
• Easy application • Time saving • No expensive tools required • Dust free • Low VOC / Green products • Reduced wastage
• 容易应用 • 节省时间 • 不需昂贵的工具• 无尘• 低VOC / 环保产品• 减少废料
BENEFITS好处
SYSTEMWET ROOM 防水与粘砖系统
DRI-TILE DA-302-in-1 Tile Adhesive & Grout (8kg per pail)二合一瓷砖胶和瓷砖胶浆
SUPER PRIMER F1Water Resistant Bonding Agent & Sealer Coat (5kg or 20kg per pail)防水粘合剂和密封剂涂层
DRI-TAPE J-50Butyl Fleece Tape (10m per roll)丁基羊毛胶带
DRI-LASTIC WP-20Rubberized Acrylic Waterproo�ng(7kg or 25kg per pail)橡胶丙烯酸防水
WATERPROOFING MATERIAL CHECK LIST
For a 50 sqft bathroom.. • Super Primer F1 : 1 pail (5kg) • Dri-Lastic WP-20 : 1 pail (7kg) • Dri-Tape J-50 : 2 rolls (10m)
CONVENTIONAL SYSTEM DRITECH SYSTEM
Waterproo�ngMortar
Waterproo�ngLatex
Tile AdhesiveGeneral
Latex
Tile Grout
Cement(For Angle
Fillet)
Empty Pail(For Mixing)
Water Source ElectricMixer
Waterproo�ngTrowel
ElectricityTiling Trowel Grout Float
Dri-Tile DA-30Super Primer F1 Dri-Lastic WP-20 Dri-Tape J-50
Roller
Tiling Trowel
Grout Float
3
2
1
4
5
6
7
8
9
10
11
12 13
1 2 3 4
5 6 7
LESS TOOLSMATERIALSWASTAGE
WITH DRITECH’S WET ROOM SYSTEM..
减少所须的工具、材料、废料
Complete waterproo�ng & tiling in 1 day!
METHOD STATEMENT & TIMELINEINSTALLATION 安装方式与时间线
15 MINUTES 10-30 MINUTES 2-4 HOURS
1Step
Tape all corners, joints & pipe penetrations with DRI-TAPE J-50.
2Step
3Step
用DRI-TAPE J-50粘合所有角落,接头和管道穿透。
Apply SUPER PRIMER F1 to walls (>300mm height)that are exposed to water, e.g. shower walls).
将SUPER PRIMER F1涂在暴露于水的墙壁(> 300mm高度),如淋浴墙。
Apply 1st coat of DRI-LASTIC WP-20 to�oors & walls with anupturn until 300mm.
在地板与墙壁上(直到300mm) 涂第一层DRI-LASTIC WP-20。
4Step
After the 1st coat has dried(~2-4 hours), apply the 2nd coat of DRI-LASTIC WP-20.
第一层干后(~2-4小时),涂第二层DRI-LASTIC WP-20。
5Step
After the waterproo�nghas dried, install tiles using DRI-TILE DA-30.
防水干后,使用DRI-TILE DA-30安装瓷砖。
2-4 HOURS 6-8 HOURS
1天内安装防水系统与粘瓷砖!
* Application times are based on best estimates. Good ventilation is needed for e�ective curing. 所述的时间线是基于最佳估计。 以确保产品正确固化,该场地需要良好的通风。
DETAILED DRAWINGS & OTHERSTECHNICAL SPECIFICATIONS 技术资料
Super Primer F-1
Dri-Lastic WP-20
Dri-Tape J-50
Water resistant sealer coat
Single-component waterproo�ng membrane
Butyl �eece tapeDri-Tile DA-30 2-in-1 tile adhesive & grout
LOCATION
CONCEALEDWET AREAS- Toilets- Bathrooms- Kitchens- Balcony- Ablution- etc.
HIGH PERFORMANCE ELASTOMERIC RUBBERIZED ACRYLIC MODIFIED WATERPROOFING
DESCRIPTION UNIT UNIT RATE
To supply & apply 2 coats of DRI-LASTIC WP-20 (approx. 1.0 kg/sqm, min. 2 coats), mono-component rubberized acrylic liquid applied waterproo�ng membrane withtreatment to the water outlet according to the manufacturer’s (DRITECH CHEMICALSSdn. Bhd.) speci�cation and instructions.
- Upturn 300mm high - Angle �llet with DRI-TAPE J-50 - Protective screed (by others)
HIGH PERFORMANCE, WATER RESISTANT BONDING & SEALER COAT(SHOWER WALLS - OPTIONAL)To supply & apply 1 coat of SUPER PRIMER F-1 (approx. 0.2 - 0.3 kg/sqm), mono-component water resistant acrylic bonding & sealer coat to shower walls from 300mmheight and above.
m2
m
m2
DISPERSION-BASED TILE ADHESIVE & TILE GROUT (OPTIONAL)To supply & apply DRI-TILE DA-30, mono-component, dispersion-based D2TE tileadhesive & tile grout for the installation of tiles & �lling of tile joints.
- Perimeter & expansion joints (by others)
m2
www.dritechchemicals.com