Embed Size (px)
Citation preview
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb www.abrasive-grit.eu & www.abrasive-grit.hr
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb
Basic information about the company
• ABRASIVE GRIT d.o.o. has founded in 2015 with the intention of grit products based on copper. Nearness of many sea ports on Adriatic Sea as well as good condition of road and energy infrastructure makes our location great for business.
• The impact of a good business climate and encouragement of the manufacturing sector have strengthened our intention to cooperate with brand new factory. Factory has most advanced equipment in the field with fully automated quality control at reference points in order to achieve the best quality at the request of our customers.
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb
• Our product copper grit possesses all the qualities of abrasive material widely used in anti corrosion protection as the chemical composition of hardness 7.5 per MOS scale and granulometry with range 0.2-3 mm by ISO standard. Form of grains of grit is irregular prismatic shape with a lot of sharp edges which gives great abrasiveness and kinetic energy produced by weight and speed in airstream.
The material is environmentally friendly in accordance with European standards and meets the most rigid health and environmental standards which is monitored daily during the manufacturing process through a reputable reference laboratory SGS.
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb
• Grit is packed in jumbo bags from 1.5t shipped by truck to the port and in the shortest time continuously delivered to buyers.
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb
• Implementation of our grit is wide: from the shipbuilding industry, steel structures, bridge construction engineering and metal industries. Our current opportunities are 250,000 tons annually with a tendency to enlarge volumes if necessary
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb
• Also,we would like to mention that our copper grit that is used for corrosion protection in the process of sandblasting can be used several times because of his abrasive and kinetic features which cheapens the overall process protection.
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb
• It would be our great pleasure if you could visit our factory and company and make sure of our ability.
ABRASIVE GRIT d.o.o. Zagreb - Drage Gervaisa 8. HR-10000 Zagreb
