Upload
salomon-aldape
View
212
Download
0
Embed Size (px)
DESCRIPTION
Adamant-Air Set (Dry) PDS
Citation preview
Brand Name:
Description:
Maximum Service Temperature 3000F (1650C)
P.C.E. (using ASTM C-24) Cone 31
Refractoriness : Passes ASTM C-199 at 2550F (1400C)
660- 900 psi ( 46- 63 kg/cm2)680- 815 psi ( 47- 57 kg/cm2)
Typical Chemical Analysis (%) Al 2O3 24.1 % SiO 2 71.0
Fe2O3 0.8 TiO 2 1.0
CaO 0.6Alkalies 2.5
STORAGE:
Standard Packaging: 50 lb bag
This data represents average properties and should not be considered guaranteed specificationsRESCO PRODUCTS disclaims any express or implied warranties based on this sheet.
11/19/2004 is the date this data sheet was published. Check with your RESCO sales office to make sure you have a current data sheet, since this technical data may have changed.MCL Penn Center West, Building 2 - Suite 430, Pittsburgh, PA, 15276 Phone: 888-283-5505
After 2250F (1232C)
PRODUCT DATA
Adamant - Air Set (Dry)
A dry, air-setting fireclay - silica based mortar, with a maximum service temperature of 3000F, used for bonding super duty brick. Just add water to obtain the desired trowel or dipping consistency. This product will take an air set, but does not develop its full joint strength until after heating to 220F (105C)
After 230F (110C)Joint Modulus of Rupture (using ASTM C-198)
This product should be stored in a dry place above 32F (0C) and below 100F (38C)