AKCIJSKA PONUDA ZA LABORATORIJE DENTALNE TEHNIKE

AKCIJSKA PONUDA ZALABORATORIJE DENTALNE

TEHNIKE

Akcijska ponuda za laboratorije dentalne tehnike vrijedi do 31.07.2021. ili do isteka zaliha

Akcijska ponuda za laboratorije dentalne tehnike 22

5 Freze i separirke

Za dentalnu tehniku

6 zr dijamanti

Za obradu cirkona - za turbinu

3D PR INT

1 Freeprint temp 1000 g Materijal za 3D print provizorija. Medicinski

proizvod klase II. Biokompatibilan. Pakiranje: 1000 g

2 Freeprint temp 500 g Materijal za 3D print provizorija. Medicinski

proizvod klase II. Biokompatibilan. Pakiranje: 500 g

3 VarseoVest P Plus Fosfatna uložna masa za djelomične proteze

za ulaganje 3D printanih modela Pakiranje: 6 kg

4 VarseoVest C&B Fosfatna uložna masa za krunice i mostove

za ulaganje 3D printanih modela Pakiranje: 12,8 kg

Redovna cijena s PDV-om 3.537,45 kn

Akcijska cijena s PDV-om2.829,96 kn

VPC 2.695,20 kn

20%



VPC 1.560,00 kn

20%

Redovna cijena s PDV-om 621,25 kn

Akcijska cijena s PDV-om497,00 kn

VPC 397,60 kn

20%



VPC 999,75 kn

25%


Akcijska cijena s PDV-om43,03 knVPC 34,43 kn

25%

Varseo Smile CrownPlus Prvi materijal za 3D printanje trajnih nadomjestaka na svijetu! Zatražite više informacija od vašeg prodajnog predstavnika

FreeprintMaterijali za 3D printanje. Za sve ostale Freeprint materijale zatražite cijene kod naših prodajnih predstavnika

20%

23Akcijska ponuda za

laboratorije dentalne tehnike

7 zr dijamanti

za obradu cirkona - za turbinu

8 94003SC/ C / M /F

Polirer za keramiku sa dijamantnim zrncima, razne gruboće (zeleni, plavi, rozi, sivi), disk, promjer 26 mm

9 94000C/ M/ F

Polirer za keramiku sa dijamantnim zrncima, plamičasti, razne gruboće (plavi, rozi, sivi)

10 94001C/ M/ F

Polirer za keramiku sa dijamantnim zrncima, plamičasti, razne gruboće (plavi, rozi, sivi)

11 9545C / M / F

Polirer za keramiku sa dijamantnim zrncima, razne gruboće (plavi, rozi, sivi), disk, promjer 11 mm

12 94011C/ F

Polirer za cirkon sa dijamantnim zrncima u 2 koraka, disk, promjer 26 mm

13 94012C/F




25%



VPC 249,45 kn

25%



25%



25%



25%



VPC 249,45 kn

25%



25%


14 94013C/ F


15 94018C/ F

Polirer za cirkon sa dijamantnim zrncima u 2 koraka, plamičasti

16 DCB abrazivi: DCB1/ CA

Povećana efikasnost, skidaju više materijala uz produljeni vijek trajanja

17 DCB abrazivi: DCB2.104.048


18 DCB abrazivi: DCB2.104.060


19 DCB abrazivi: DCB3/CA/DCB8CA


20 DCB abrazivi: DCB5/DCB6




VPC 90,45 kn

25%



VPC 103,28 kn

25%



VPC 115,35 kn

25%



VPC 102,68 kn

25%



VPC 161,10 kn

25%



VPC 140,48 kn

25%



25%



METAL I

21 Wironit CoCr metal za izradu djelomičnih proteza

Pakiranje: 1 kg

22 BEGO Wironit Extrahard CoCr metal za izradu djelomičnih proteza

Pakiranje: 1 kg

23 Wirobond C CoCr metal za izradu krunica i mostova

Pakiranje: 1 kg

24 Wirobond 280 CoCr metal za izradu krunica i mostova

Pakiranje: 1 kg

25 Wiron 99 NiCr metal za izradu krunica i mostova

Pakiranje: 1 kg

26 Wiron Light NiCr metal za izradu krunica i mostova:

Pakiranje: 1 kg

ULOŽNE MASE

27 Wirofine + Begosol K 2x1 l - uložna masa za kombinirane radove 18 kg

+ Begosol K tekućina 2x1 l



VPC 937,50 kn

25%



VPC 969,75 kn

25%



VPC 2.351,25 kn

25%



VPC 2.211,00 kn

25%



VPC 2.190,75 kn

25%



VPC 1.569,10 kn

35%



VPC 723,84 kn

20%


28 Bellavest SH + Begosol HE

2x1l -uložna masa za krunice i mostove 12,8 kg + Begoswol HE tekućina 2x1 l

29 Wirovest + Begosol 2x1l- uložna masa za skeletirane radove 18 kg

+ Begosol tekućina 2x1 l

30 Wirogel Gel za dubliranje agar agar

Pakiranje: 10 kg

31 Gelon

Gel za dubliranje agar agar Pakiranje: 6 kg

32 Termo folije

za udlage, splintove, štitnike

33 Isolat

tekućina za izolaciju Pakiranje: 1 l

34 voskovi



VPC 1.057,50 kn

25%



VPC 550,80 kn

15%



VPC 98,60 kn

15%



VPC 617,26 kn

30%



VPC 570,24 kn

20%

20%

20%



35 Tribos zubi

36 K-30 akrilat za izradu totalnih proteza vrućom

polimerizacijom 700 g praha + 500 g tekućine

37 Polirepar akrilat za izradu reparatura tehnikom hladne

polimerizacije 200 g praha + 150 g tekućine

38 Politray akrilat za izradu individualnih funkcionalnih

žlica tehnikom hladne polimerizacije 700 g praha + 500 g tekućine

39 Unitray LC svjetlosnopolimerizirajuće bazne ploče za

individualne žlice. Pakiranje: 50 kom

40 581/KIT set instrumenata za modeliranje P.K. Thomas

kodiran bojom a5

41 575/SET set instrumenata za oblikovanje keramike

kodiran bojom a3 + 3 nastavka



VPC 210,00 kn

20%



VPC 148,20 kn

22%



VPC 265,60 kn

20%



VPC 249,60 kn

20%



VPC 375,83 kn

25%



VPC 405,53 kn

25%

25%


UREĐA J I

“Made in Germany”Visoko kvalitetni proizvodi izrađeni od čvrstog nehrđajućeg čelika

42 Rotogrind NT

Uređaj za mokru i suhu obradu gipsanih modela. Tehnički podaci: - napon: 230 V / 50-60 Hz - potrošnja: 1500 W - dimenzije: 35 x 35 x 47 cm - težina: 22 kg - brzina: 3000 okr/min

43 Sanduret 3

Pjeskara sa mikromlaznicama za obradu raznih materijala abrazivnim sredstvima granulacije 25-250 mikrona. Tehnički podaci: - napon: 230V / 50-60 Hz - potrošnja: 120 W - težina: 18 kg - protok zraka: 80 l/min - pritisak 0,5 - 6 bara - mlaznice: 0,8 + 1,2 + 1,5 mm

44 Steamy mini

Parni čistač pogodan za čišćenje masnih naslaga, ostataka voska, ljepila i ostalih nečistoća sa stomatoloških i laboratorijskih instrumenata. Tehnički podaci: - potrošnja: 1200 W - pritisak: 4,5 bara - temperatura pare: 150 °C - zapremina: 3,5 l - težina: 8 kg



VPC 9.013,44 kn

18%



VPC 13.437,34 kn

18%



VPC 12.715,74 kn

18%



45 26005 Triton SLA Uređaj za suho i mokro čišćenje parom sa

uloškom za demineralizaciju vode. Tehnički podaci: - napajanje: 220V/50-60 Hz - snaga: 1,5 kW - pritisak pare: 3 bara - temperatura pare: 133 ˚C - kapacitet spremnika: 2,9 l - dimenzije: 540x380x280 mm - priključak na vodovod: 3/4

46 MultiSpot

bežična polimerizacijska lampa za kompozite, udlage, adhezive. Tehnički podaci: - snaga: 100-240 V - potrošnja: 2,73 W - dimenzije: 140 x 30 x 30 mm - težina: 140 g - 385 UV i 465 nm

47 Drufosmart

Visoko kvalitetna jedinica za termoformiranje pod tlakom bazirana na dobro poznatoj Drufomat tehnici. Tlak za oblikovanje je i do 12 puta veći od snage oblikovanja vakuumskih jedinica. Tehnički podaci: - snaga: 220-240 V / 50-60 Hz - potrošnja: max. 275 W - dimenzije: 420 x 320 x 290 mm - težina: 15 kg - pritisak: od 2,5 bara - baza za folije od Ø 120 mm i veće



VPC 23.828,00 kn

20% + 2 kg Wiron Light Ni-Cr legura

GRATIS



VPC 1.833,60 kn

20%



VPC 10.420,00 kn

20%


48 Drufosmart scan

Visoko kvalitetna jedinica za termoformiranje pod tlakom bazirana na dobro poznatoj Drufomat tehnici. Tlak za oblikovanje je i do 12 puta veći od snage oblikovanja vakuumskih jedinica. Opremljena sa softverom za prepoznavanje materijala i izvanrednim dizajnom. Tehnički podaci: - snaga: 115-240 V / 50-60 Hz - potrošnja: max. 275 W - dimenzije: 420 x 320 x 290 mm - težina: 15 kg - pritisak: 2-4 bara - baza za folije od Ø 120 mm i veće

49 EyeVolution

kompaktan uređaj za polimerizaciju materijala za individualne žlice, smole za termofolijske splintove, lakove za brtvljenje, smole za zatvaranje podminiranih mjesta. Reflektirajuća rotacijska 360° podloga (stolić) spriječava zasjenjenja. LED valovi duljine 2x385 nm i 2 x 465 nm. Vrijeme programiranja po odabiru: 1; 2; 3; 5; 10 minuta. Snaga 18W.

50 PCU LED N2

LED lampa za polimerizaciju za sigurnu proizvodnju biokompatiblinih 3D printanih medicinskih proizvoda. Mogućnost spajanja na dušik.

51 MANFREDI Kerry 1 Grijač za brzo topljenje voska.

Tehnički podaci: - dimenzije: 110x140x70 mm - potrošnja: 60 W - raspon temperature: 50°C-120°C



VPC 836,40 kn

15%



VPC 28.104,00 kn

20%



VPC 4.297,60 kn

20%



VPC 14.360,00 kn

20%

The power of ultrasoundThe wash system is based on a system of high-performance transducers operating at a wash frequency of 37 kW, the frequency that optimises

Sweep modeSweep mode allows for higher-performance, more homogeneous treatment by continuously shifting maximum pressure within the cleaning liquids.

Degas functionMoreover, the Degas and AutoDegas functions induce - by applying alternate waves - explosion of the micro-bubbles in the liquids to

ULTRASOUND. ADVANCED MODES

Highea ultrasound tanks

All the power of ultrasound.

A new generation of ultrasound tanks, now more complete and powerful than ever. Highea ultrasound tanks have been designed to provide maximum reliability and extreme flexibility.Ultrasound technology makes it possible to remove dirt from the surfaces of immersed objects, thoroughly

and the very best materials: the perfect instrument for all your daily cleaning requirements.

Ultrasound technology

Ultrasound washing uses special piezoelectric oscillation systems that transform high frequency energy into mechanical energy, generating millions of micro-bubbles in the in-tank liquid. The compression exerted by the vibrating waves fills the micro-bubbles, causing them to implode. This generates high-energy jets that strip dirt from the surfaces of the immersed objects, cleaning even those parts that

Advanced functions

Thanks to the heating function the temperature can range from 30 to 80 °C with 5 °C setting steps. LED lights indicate set temperature and current temperature at all times. The Highea ultrasound tank lets you select a wash time from 1 to 30 minutes. It's also possible to wash continuously for an indefinite time.

Versatile load capacity

Available in three sizes, Highea ultrasound tanks are perfect whatever the surgery's space or load requirements. The 3-litre tank is suitable for loads of up to 1 kg, while the 6-litre version has a maximum capacity of 5 kg. The 9-litre tank can hold loads of up to 6 kg.

Innovative, reliable and complete

Highea ultrasound tanks are designed to respond to the operative needs of every surgery. Cutting-edge technology, user-friendliness and maximum reliability ensure Highea devices are always ready and in perfect working order.

Side tapThe tank can easily be drained via the rear outlet by turning the laterally positioned tap 90°.

Positionable dischargeThe angled rear connector is connected to the discharge point. It can swivel through 360°, perfectly adapting to any workspace.

Practical lidThe plastic lid protects against any splashing, suppresses noise and accelerates liquid heating.

Filling levelA maximum fill level warning prevents any liquid overflow during washing.

Complete equipment set

All Highea ultrasound tank models come with a standard equipment set complete with two beakers and a beaker holder. These containers are essential for washing very

detergents or disinfectants during the same wash.

The power of ultrasoundThe wash system is based on a system of high-performance transducers operating at a wash frequency of 37 kW, the frequency that optimises the cavitation effect.


Degas functionMoreover, the Degas and AutoDegas functions induce - by applying alternate waves - explosion of the micro-bubbles in the liquids to maximise wash efficiency.



Outstanding qualityIntense, effective cleaning thanks to wash time and temperature settings, high-power high-quality ultrasound, Sweep and Degas functions.

3 volumes to meet every needA full range of three sizes to suit the space and load requirements of any surgery.

Simply MocomUser-friendly keypad, time and temperature LEDs, drain tap and carry handles.

All the power of ultrasound.Intense cleaning thanks to the most effective, modern technology.

A new generation of ultrasound tanks, now more complete and powerful than ever. Highea ultrasound tanks have been designed to provide maximum reliability and extreme flexibility.Ultrasound technology makes it possible to remove dirt from the surfaces of immersed objects, thoroughly cleaning even those parts that are most difficult to reach and hidden holes. Innovative technology and the very best materials: the perfect instrument for all your daily cleaning requirements.


Ultrasound washing uses special piezoelectric oscillation systems that transform high frequency energy into mechanical energy, generating millions of micro-bubbles in the in-tank liquid. The compression exerted by the vibrating waves fills the micro-bubbles, causing them to implode. This generates high-energy jets that strip dirt from the surfaces of the immersed objects, cleaning even those parts that are most difficult to reach and hidden holes.

Advanced functions











All Highea ultrasound tank models come with a standard equipment set complete with two beakers and a beaker holder. These containers are essential for washing very small instruments or when you need to use different detergents or disinfectants during the same wash.

The power of ultrasoundThe wash system is based on a system of high-performance transducers operating at a wash frequency of 37 kW, the frequency that optimises


Degas functionMoreover, the Degas and AutoDegas functions induce - by applying alternate waves - explosion of the micro-bubbles in the liquids to



All the power of ultrasound.

A new generation of ultrasound tanks, now more complete and powerful than ever. Highea ultrasound tanks have been designed to provide maximum reliability and extreme flexibility.Ultrasound technology makes it possible to remove dirt from the surfaces of immersed objects, thoroughly

and the very best materials: the perfect instrument for all your daily cleaning requirements.


Ultrasound washing uses special piezoelectric oscillation systems that transform high frequency energy into mechanical energy, generating millions of micro-bubbles in the in-tank liquid. The compression exerted by the vibrating waves fills the micro-bubbles, causing them to implode. This generates high-energy jets that strip dirt from the surfaces of the immersed objects, cleaning even those parts that

Advanced functions











All Highea ultrasound tank models come with a standard equipment set complete with two beakers and a beaker holder. These containers are essential for washing very

detergents or disinfectants during the same wash.

The power of ultrasoundThe wash system is based on a system of high-performance transducers operating at a wash frequency of 37 kW, the frequency that optimises the cavitation effect.


Degas functionMoreover, the Degas and AutoDegas functions induce - by applying alternate waves - explosion of the micro-bubbles in the liquids to maximise wash efficiency.



Outstanding qualityIntense, effective cleaning thanks to wash time and temperature settings, high-power high-quality ultrasound, Sweep and Degas functions.

3 volumes to meet every needA full range of three sizes to suit the space and load requirements of any surgery.

Simply MocomUser-friendly keypad, time and temperature LEDs, drain tap and carry handles.

All the power of ultrasound.Intense cleaning thanks to the most effective, modern technology.

A new generation of ultrasound tanks, now more complete and powerful than ever. Highea ultrasound tanks have been designed to provide maximum reliability and extreme flexibility.Ultrasound technology makes it possible to remove dirt from the surfaces of immersed objects, thoroughly cleaning even those parts that are most difficult to reach and hidden holes. Innovative technology and the very best materials: the perfect instrument for all your daily cleaning requirements.


Ultrasound washing uses special piezoelectric oscillation systems that transform high frequency energy into mechanical energy, generating millions of micro-bubbles in the in-tank liquid. The compression exerted by the vibrating waves fills the micro-bubbles, causing them to implode. This generates high-energy jets that strip dirt from the surfaces of the immersed objects, cleaning even those parts that are most difficult to reach and hidden holes.

Advanced functions











All Highea ultrasound tank models come with a standard equipment set complete with two beakers and a beaker holder. These containers are essential for washing very small instruments or when you need to use different detergents or disinfectants during the same wash.

Izvanredna kvalitetaUčinkovito intenzivno čišćenje zahvaljujući optimiziranom vremenu pranja i postavkama temperature. Velike snage i visoke kvalitete. Funkcije “Sweep i Degas”

3 volumena koji zadovoljavaju potrebe svake klinikeRaspon od 3 veličine: • Highea 3 - 1 kg instrumenata • Highea 6 - 5 kg instrumenata• Highea 9 - 6 kg instrumenata

Jednostavnost Mocom dizajna• vrlo intuitivan• Vrijeme ciklusa i temperature označeni

LED osvjetljenjem• Ručke za nošenje

Zagreb, Hondlova 2/2tel: 01/ 239 67 60; fax: 01/ 231 26 12

e-mail: [email protected]; www.mtf.hr

Narudžbe i informacije:

Kontinentalna Hrvatska, Istra i Kvarner

Tomislav Štefančićmob: 091 1802 420

e-mail: [email protected]

Sven Manzonimob: 099 3875 515


Senija Marekmob: 091 1871 970


Ivan Brkićmob: 091 1871 964


Slavonija Dalmacija

Mate Pejićmob: 091 187 1979


Georgia Mazavacmob: 091 187 1969


Documents

AKCIJSKA PONUDA ZA LABORATORIJE DENTALNE TEHNIKE