32
www.ids-france.net Version 7 ALFOMBRAS DE CAUCHO PARA GANADERÍA Para el bienestar del ganado, para la tranquilidad de usted AGRICULTURA

ALFOMBRAS DE CAUCHO PARA - Agros Comercial€¦ · PARA GANADERÍA Para el bienestar del ganado, para la tranquilidad ... Establo compartimentado - Classique: alfombra individual

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

www.ids-france.netVers

ion

7

ALFOMBRAS DE CAUCHO PARA GANADERÍA

Para el bienestar del ganado,

para la tranquilidad de usted

AGRICULTURA

2

Introduccioń

Stock importante

IDS: especialista en alfombras Desde hace más de 20 años, IDS está especializado en las alfombras de caucho. Ha sabido desarrollar numerosos productos para el sector agrícola y ha adquirido una gran experiencia en los sectores de la industria y de la construcción.

Productos adaptados para cada uso Los bovinos permanecen cada vez más tiempo estabulados. Es por eso por lo que IDS ha puesto a punto unas alfombras destinadas a todo tipo de establos, con características muy precisas, a fin de ser siempre lo más eficaces posible.

Productos de calidad Las alfombras están sometidas a grandes esfuerzos durante su utilización, por lo que IDS se compromete a suministrarle productos de calidad, probados y garantizados. Con los albaranes de entrega se incluyen los manuales de montaje, los cuales están igualmente disponibles descargándolos desde nuestra página web o bajo simple demanda a nuestro servicio comercial. Estos manuales deben respetarse para toda instalación. La garantía de nuestros productos se anula en caso de no respetar las instrucciones de los manuales de montaje.

Manual

Estamos certificados conformes con la norma ISO 9001.La dirección reitera su compromiso a utilizar los recursos necesarios para continuar mejorando la satisfacción de sus clientes y la competitividad de la empresa, garantizando al mismo tiempo el respeto a la seguridad de cada uno y del medio ambiente. Nuestra empresa trabaja con las instancias de certificación o de normalización (tipo LNE, IANESCO, LABORATOIRE POURQUERY...).

ID Group / IDS es miembro adherente BSCI / FTA y se compromete a respetar los principios del Código de conducta BSCI (respeto del derecho del trabajo, ética en los negocios, no recurrir al trabajo infantil, no discriminación, protección del medio ambiente...).

3

Los moldes IDS están representados en 3D. El departamento I+D ID GROUP trabaja permanentemente en la elaboración de nuevos productos.

Desde la formulación de la receta hasta el acabado, pasando por la extrusión, el moldeado y el calandrado, IDS domina todos los procesos de transformación del caucho gracias a sus eficaces líneas de producción.

Fabricación del caucho

IDS selecciona las materias más nobles, como el caucho natural para realizar mezclas especialmente estudiadas para una utilización en un medio agrícola.

Recogida del latex de hevea

Los productos IDS están compuestos principalmente de caucho. Este material natural se elabora a partir del látex secretado por un árbol: el hevea. El caucho se utiliza de dos formas:

Caucho natural no reciclado: El caucho natural es el producto procedente directamente de la transformación del látex. Es muy resistente a la abrasión y permanece flexible, incluso en caso de helada o de exposición prolongada a los rayos U.V. Ciertos aditivos añadidos durante el proceso de fabricación permiten obtener cauchos particularmente resistentes a los aceites (caucho nitrilo) o, más específicamente y bajo pedido, cauchos resistentes al fuego o de un color específico.

Mezcla de caucho natural no reciclado y caucho natural reciclado: El caucho natural puede igualmente mezclarse con caucho reciclado, a fin de reducir su coste. Las características técnicas de esta mezcla son menos eficientes que las del caucho no reciclado. El caucho reciclado está constituido por una mezcla de gránulos de caucho unidos por medio de un elastómero poliuretano. Los gránulos de caucho proceden principalmente del proceso de reciclaje. El caucho reciclado está perfectamente indicado para los revestimientos de suelo pegados o losetas de gran espesor no pegadas. Es antideslizante, robusto y aísla del frío y del ruido.

4

Índice

Páginas 6 a 14 Zona de descanso

Zona circulación Páginas 15 a 17

Páginas 16 a 21 Zona de ordeño

Transporte de ganado Páginas 22 a 24

Páginas 24 a 25 Cerdos

Otros Páginas 25 a 29

5

O�cinaLechería

Zona de lactancia

Zona de partos

Robots

Pasillo rascado

Pasillo de alimentación

Pasillo de alimentación

Pasillo de paja

Rejilla

Cornadizas

Praderas

Bienvivre

son métier

Disposición

Camino exteriorLosas IDS Green (p. 26)

Puerta Lamas transparentes (p. 29)

Establo compartimentado - Classique: alfombra individual (p. 10)

- IDS 16: alfombra en rollo (p. 16)

Rejilla TEasy Fix (p. 15)

Zona de parto Clip Super (p. 17)

Lechería- Baldosas IDEX (p. 18)

- Baldosas MB46 (p.19)

Oficina Baldosas IDEX (p. 18)

Fosa de sala de ordeño- Rejilla M69 y MR12

(p. 20)

- Baldosas IDEX (p. 18)

- Baldosas MB46 (p.19)

Muelle de ordeño y zona de espera - Clip Super (p. 17)

- IDS 12: alfombra en rollo (p. 16)

Pasillo rascado - Clip Super (p. 17)

- IDS 16: alfombra en rollo (p. 16)

Cubículos - Quiéta: alfombra individual (p.6)

- Quiéta rollo (p.7)

- Séréna: alfombra individual (p.8)

- Quiéta +: colchón individual (p.9)

- Classique: alfombra individual (p.10)

- Colchón IDS (p.11)

- Colchón Natura (p.12)

- Colchón Florida (p.13)

6

QuiétaAlfombras ultra resistentes para cubículos individuales

Descanso

Confort • Flexibilidad, para un

descanso inigualable: tacos de caucho distribuidos de forma apropiada en la cara inferior

• Flexibilidad de15,8 mm, medida por el DLG (bajo un peso de 200 kg aplicado a un cilindro de 120 mm)

Seguridad • Cara superior martilleada

antideslizante: menos heridas, menos stress, más bienestar y un rendimiento más elevado del animal

Higiene, fácil mantenimiento• 100 % caucho natural: impermeabilidad perfecta • Pendiente integrada en la parte trasera de la alfombra,

permitiendo la evacuación de los líquidos • Lavado a alta presión

Fàcil de instalar • Alfombras adaptadas a todo tipo de cubículos • Alfombras conectadas entre sí por medio de un sistema

exclusivo IDS • Ubicación de las fijaciones (3 tacos en la parte delantera

de la alfombra)

Fiable, económica • Alta resistencia al aplastamiento • Reduce los costes de mantenimiento,

el consumo de paja y el tiempo de limpieza

Fijación• Tacos de golpe 8 x 80 mm con tornillo A2

+ arandela de acero inoxidable (3 tornillos por placa)

Referencia Anchura útil Longitud Espesor Peso de la placa QUIETA1100CLIP 1100 mm 1850 mm 30 mm 44 kgQUIETA1150CLIP 1150 mm 1850 mm 30 mm 46 kgQUIETA1200CLIP 1200 mm 1850 mm 30 mm 50 kgQUIETA1250CLIP 1250 mm 1850 mm 30 mm 52 kgQUIETA1100DROIT 1100 mm 1850 mm 30 mm 38 kgQUIETA1150DROIT 1150 mm 1850 mm 30 mm 45 kgQUIETA1200DROIT 1200 mm 1850 mm 30 mm 47 kgQUIETA1250DROIT 1250 mm 1850 mm 30 mm 50 kgQUIETA1300DROIT PERFIL T QUIETA

1300 mm 1850 mm 30 mm 54 kg

Perfil en “T” para Quiéta 1300

Clips

Tacos

Junta de impermeabilidad

Pendiente integrada

Novedad

Novedad: Pendiente de 40 cm CAUCHO

NATURAL

100%Garantía

añosManual

7

Quiéta en rollo Alfombra en rollo para cubículo

Descanso

Confort • Flexible, para un descanso

inigualable: tacos de caucho distribuidos de forma apropiada en la cara inferior

• Flexible de 15,8 mm, medida por el DLG (bajo un peso de 200 kg aplicado a un cilindro de 120 mm)

Seguridad • Cara superior martilleada

antideslizante: menos heridas, menos stress, más bienestar y un rendimiento más elevado del animal

Higiene, fácil mantenimiento • 100 % caucho natural: impermeabilidad perfecta • Pendiente integrada en la parte trasera de la alfombra,

permitiendo la evacuación de los líquidos • Lavado a alta presión

Fàcil de instalar • Alfombras adaptadas a todo tipo de cubículos

Fiable, económica • Alta resistencia al aplastamiento • Reduce los costes de mantenimiento, el consumo

de paja y el tiempo de limpieza

Fijación• Tacos de golpe 8 x 80 mm con tornillo A2

+ arandela de acero inoxidable (3 tornillos por placa)

Existe en 1,48 m especial terneros

Referencia Anchura útil Longitud Espesor PesoQUIETAROULEAU 1480 mm Maxi 30 m 30 mm 17,40 kg/m²QUIETAROULEAU 1750 mm Maxi 30 m 30 mm 17,40 kg/m²QUIETAROULEAU 1800 mm Maxi 30 m 30 mm 17,40 kg/m²QUIETAROULEAU 1850 mm Maxi 30 m 30 mm 20 kg/m²PERFIL T QUIETA 1850 mm - - 4 kg/pieza

CAUCHO NATURAL

100%Garantía

añosManual

Novedad: Pendiente de 40 cm

8

Descanso SérénaAlfombra para cubículo con pendiente integrada

Confort• Su gran espesor (5 cm) y sus tacos

de diseño único. Procuran un excelente confort

Seguridad • Cara superior martilleada • Flexible evita las heridas y favorece

la productividad del animal

Higiene, fácil mantenimiento • 100 % caucho natural • Pendiente integrada de 50 cm, permite la evacuación

de los líquidos • Lavado a alta presión

Fàcil de instalar • Alfombras conectadas entre sí por medio

de un sistema exclusivo IDS • Ubicación de las fijaciones (3 tacos en la parte

delantera de la alfombra)

Fiable, económica • Resistente al aplastamiento al aplastamiento • Reduce los costes de mantenimiento, el consumo

de paja y el tiempo de limpieza

Fijación• Tacos de golpe 8 x 100 mm con tornillo A2

+ arandela de acero inoxidable (3 tornillos por placa)

Referencia Anchura útil Longitud Espesor Peso de la placa SERENA1150 1150 mm 1800 mm 50 mm 75 kgSERENA1200 1200 mm 1800 mm 50 mm 68 kgSERENA1250 1250 mm 1800 mm 50 mm 68 kgSERENA1300 PERFIL T SERENA

1300 mm 1800 mm 50 mm 83 kg

Referencias disponibles con bordes rectos por encargo

Cara inferior

Perfil en “T” para Séréna 1300

Pendiente: 50 cmInclinación: 5 %

Altura: 5 cm

Novedad

CAUCHO NATURAL

100%Garantía

añosManual

9

Quiéta +Colchón para cubículo individual

ultra robusto

Descanso

Innovación IDS

Seguridad • Cara superior martilleada antideslizante• Flexible evita las heridas en los jarretes

Higiene, fácil mantenimiento • Espuma cerrada en una pieza de caucho hermética • Pendiente integrada en la parte trasera, permitiendo

la evacuación de los líquidos • Lavado a alta presión

Fàcil de instalar • Conjunto parte superior + espuma + cobertura ensamblado

en fábrica • Alfombras conectadas entre sí por medio de un sistema

exclusivo IDS • Ubicación de las fijaciones (3 tacos en la parte delantera

de la alfombra)

Fiable, económica • Resistente al aplastamiento gracias a la espuma de látex • Reduce los costes de mantenimiento, el consumo de

paja y el tiempo de limpieza • Material con memoria de forma

Fijación• Tacos de golpe 8 x 100 mm con tornillo A2 + arandela de

acero inoxidable (3 tornillos por placa)

Espuma 100 % látex

Perfil en “T” para Quéta+ 1300

Referencia Anchura útil Longitud Espesor Peso de la placa QUIETA+1150CLIP 1150 mm 1850 mm 50 mm 77 kgQUIETA+1200CLIP 1200 mm 1850 mm 50 mm 78 kgQUIETA+1250CLIP 1250 mm 1850 mm 50 mm 81 kgQUIETA1300DROIT PERFIL T QUIETA+

1300 mm 1850 mm 50 mm 85 kg

Referencias disponibles con bordes rectos por encargo

Confort• Colchón de gran flexibilidad, gracias a

su gruesa espuma 100 % látex • Flexibilidad de 32 mm, medida por

el DLG (bajo un peso de 200 kg aplicado a un cilindro de 120 mm)

El único colchón del mercado que se entrega de fábrica

completamente hermético

Novedad

Refuerzo en los 4 lados de la alfombra

Inserción textil cara superior

CAUCHO NATURAL

100%Garantía

añosManual

10

ClassiqueAlfombra robusta individual para establos compartimentados y cubículos

Descanso

Confort• Confortable, gracias a su estructura de

caucho natural • Eficaz para el descanso del ganado,

así como para las largas estancias de pie en caso de establo divido en compartimentos

Seguridad • Cara superior martilleada antideslizante• Facilita el descanso de las vacas• Reduce los riesgos de heridas

Higiene, fácil mantenimiento • Lavado a alta presión • Cara inferior ranurada para eliminar

los líquidos

Fàcil de instalar • Alfombra adaptada a todo tipo

de cubículos, gracias a sus numerosas dimensiones

• Fijación por medio de 3 tacos en la parte delantera de la alfombra

Fiable, económica • Producto muy robusto y antideformable • Reduce los costes de mantenimiento,

el consumo de paja y el tiempo de trabajo

Fijación• Tacos de golpe 8 x 80 mm con tornillo A2

+ arandela de acero inoxidable (3 tornillos por placa)

Cara inferior ranurada / Cara superior martilleada

Referencia Anchura útil Longitud Peso/m2

100 cm 150 - 165 - 175 - 185 - 200 - 220 cm 17 mm 23 kg/m2

110 cm 150 - 165 - 175 - 185 - 200 - 220 cm 17 mm 23 kg/m2

120 cm 150 - 165 - 175 - 185 - 200 - 220 cm 17 mm 23 kg/m2

125 cm 150 - 165 - 175 - 185 - 200 - 220 cm 17 mm 23 kg/m2

Posibilidad de corte por encargo

Cuatro lados bordes rectos

CAUCHO NATURAL

100%Garantía

añosManual

1111

Colchón IDS - con o sin pendiente

Colchón de espuma de poliuretano para cubículo

Descanso

Confort• Gran flexibilidad, gracias a su

espuma poliuretano de espesor 45 mm y de densidad 200 kg/m3

Seguridad • Cara superior impresión tela

antideslizante, evita las heridas y facilita el descanso de las vacas

Higiene, fácil mantenimiento • Sistema en rollo, sin junta • Perfecta impermeabilidad gracias

a sus perfiles de aluminio evitando las infiltraciones

• Espuma hermética mediante una hoja de polietileno

Fàcil de instalar • Longitud del rollo por encargo del cliente• Manual de montaje y accesorios incluidos

Fiable, económica • Espuma con memoria de forma y tela

resistente a la abrasión • Reduce los costes de mantenimiento,

el consumo de paja y el tiempo de trabajo

Cara superior impresión tela (cara inferior lisa)

Parte delantera

Parte trasera

Pendiente

integrada: 50 cm

Espesor 50 mm

Referencia Anchura Longitud Espesor Peso/m2

MATELASIDSAP Con pendiente

1,80 mProfundidad del cubículo

necesaria: 1,90 m Hasta 60 m 50 mm

Tela: 5,28 kg/m2 Espuma de poliuretano: 10 kg/m² - 200 kg/m3

MATELASIDSSP Sin pendiente

1,80 mProfundidad del cubículo

necesaria: 1,90 m Hasta 60 m 50 mm

Tela: 5,28 kg/m2 Espuma de poliuretano: 10 kg/m² - 200 kg/m3

IDSSHEET TELA SOLA

2,00 m Hasta 60 m4 mm

Reforzada con una inserción textil

Tela: 5,28 kg/m2

50 m

mPendiente: 500 mm

50 m

m

Novedad

Garantía

añosManual

12

Confort• El mas cómodo de los Colchónes

en rollo, gracias a su espuma látex de espesor 40 mm y de densidad 220 kg/m3

Seguridad • Cara superior impresión tela

antideslizante, evita las heridas y facilita el descanso de las vacas

Higiene, fácil mantenimiento • Sistema en rollo, sin junta • Perfecta impermeabilidad gracias

a sus perfiles de aluminio evitando las infiltraciones

• Espuma hermética mediante una hoja de polietileno Cara superior impresión tela

(cara inferior lisa)

Parte trasera

Parte delantera

Espesor 45 mm

Referencia Anchura Longitud Espesor Peso/m2

MATELASNATURA1,80 m

Profundidad del cubículo necesaria: 1,90 m

Hasta 60 m 45 mmTela: 5,28 kg/m2

Espuma de látex 11,7 kg/m2 - 220 kg/m3

IDSSHEET TELA SOLA

2,00 m Hasta 60 m4 mm

Reforzada con una inserción textil

Tela: 5,28 kg/m2

Colchón Natura Colchón de espuma de látex para cubículo

Descanso

Fàcil de instalar • Longitud del rollo por encargo del cliente• Manual de montaje y accesorios incluidos

Fiable, económica • Subcapa 100 % latex • Reduce los costes de mantenimiento, el consumo

de paja y el tiempo de trabajo

Novedad

Garantía

añosManual

13

Colchón de caucho reciclado para cubículo

Descanso

Confort• Alta resistencia a lo largo del

tiempo gracias a su capa de caucho de espesor 35 mm y de densidad 800 kg/m3

Seguridad • Cara superior impresión tela

antideslizante, evita las heridas y facilita el descanso de las vacas

Higiene, fácil mantenimiento • Sistema en rollo, sin junta • Perfecta impermeabilidad gracias

a sus perfiles de aluminio evitando las infiltraciones

• Espuma hermética mediante una hoja de polietileno

Colchón Florida - con o sin pendiente

Cara superior impresión tela (cara inferior lisa)

El único colchón

100 % caucho

Espesor 40 mm

40 m

mPendiente: 250 mm

40 m

m

Fàcil de instalar • Longitud del rollo por encargo del cliente• Manual de montaje y accesorios incluidos

Fiable, económica • Capa de caucho muy acolchado• Reduce los costes de mantenimiento,

el consumo de paja y el tiempo de trabajo

Referencia Anchura Longitud Espesor Peso/m2

MATELAS FLORIDAAP Con pendiente

1,80 mProfundidad del cubículo

necesaria: 1,90 m Hasta 60 m 40 mm

Tela: 5,28 kg/m2 Capa de caucho: 28 kg/m2 - 800 kg/m3

MATELAS FLORIDASP Sin pendiente

1,80 mProfundidad del cubículo

necesaria: 1,90 m Hasta 60 m 40 mm

Tela: 5,28 kg/m2 Capa de caucho: 28 kg/m2 - 800 kg/m3

IDSSHEET TELA SOLA

2,00 m Hasta 60 m4 mm

Reforzada con una inserción textil

Tela: 5,28 kg/m2

Novedad

Parte delantera

Parte trasera

Garantía

añosManual

14

Obligaciones de instalación:

fijar al suelo un listón (no incluido) y fijar sobre él la rodillera con ayuda

de los 8 tacos

Confort y seguridad • Rodillera 100 % caucho • Modelo redondeado, evitando los riesgos de heridas • Altura limitada, permitiendo a las vacas estirar sus patas

delanteras • Prever 8 tacos por rodillera

Fijación• Tacos de golpe 8 x 80 mm con tornillo A2

+ arandela de acero inoxidable (8 tornillos por rodillera)

Referencia Anchura Longitud Espesor Altura Peso de la placa

IDS STOP 150 mm 1,14 - 1,20 m 20 mm 150 mmAprox.

13 kg/pieza

Referencia Anchura Longitud Resistencia Cinta PU 75 mm 75 mm A medida 9 toneladasTensor de cinta de 75 mm 75 mm 50 cm 9 toneladas

Color dependiendo de la mercancía recibida

Confort y seguridad • Cinta a medida para bloquear las vacas en la parte

delantera del cubículo • Ningún riesgo de lesiones en las articulaciones • Posibilidad para la vaca de estirar sus patas delanteras

Consejo: para una vida útil óptima de las cintas, proteger éstas de todo

frote con piezas metálicas o de cemento.

Cinta Tensor de cinta

IDS StopRodillera para cubículo

Descanso

Cinta rodilleraCinta para cubículos

Descanso

Manual

15

EASY FIXAlfombra especial para

emparrillado de hormigón

Confort y seguridad • Parte superior

martilleada antideslizante

• Evita las caídas de las vacas y favorece la detección de un animal en celo

• Permite una mejor circulación de los animales

Higiene, mantenimiento fácil • Perfil superior en

pendiente para mejorar el drenaje

• Compatible con rascadores

Fàcil de instalar • Tacos de fijación incluidos

con la alfombra • Numerosas dimensiones

disponibles

Fiable, económico • Vida útil muy larga,

garantía de 5 años • Mejor rendimiento

y reducción de los costes veterinarios debido a las caídas sobre el hormigón Presupuesto bajo demanda

* Dimensiones a medida

Circulación

Perfil en pendiente

Garantía

años5

Manual

Especial terneros *

16

IDS 12 / IDS 16 Circulación Sala de ordeño

Confort y seguridad • Flexible, con la superficie superior martilleada

antideslizante • Limita los riesgos de caída y de estrés

de los animales

Higiene, fácil mantenimiento • Compatible con numerosos modelos

de rascadores • Lavado a alta presión • Resiste a la mayoría de los productos

de mantenimiento

Fàcil de instalar • Colocación sin juntas• Pocas fijaciones• Respetar el manual de montaje incluido

Fiable, económico • Muy resistente a la abrasión • Reduce los gastos de veterinario debidos a

las caídas, mejor detección de un animal en celo • Tela incorporada

Fijación• Clavos acero 6,2/6,5 x 60

Referencia Espesor Anchura máxima Longitud Peso/m²

IDS12 12 mm 2 m A petición 13,9 kgIDS16 16 mm 2 m A petición 21,2 kg

Sala de ordeño: IDS 12

Pasillo rascado: IDS 16

Cara inferior lisa

Cara superior con un nuevo martilleado

Rollo para circulación de los animales en pasillo rascado, sala de ordeño y zona de espera

Garantía

años5

Manual

17

Circulación Sala de ordeño

CLIP SUPERAlfombra para circulación de

los animales y zona de espera

Confort y seguridad • Cara superior con rombos, antideslizante • Buena flexibilidad y adherencia, evitando que las vacas

resbalen, incluso en un medio muy húmedo

Higiene, mantenimiento fácil • Resiste a la mayoría de los productos de mantenimiento

Fàcil de instalar • Colocación fácil, gracias al sistema de “puzle”• Respetar el modo de empleo incluido

Fiable, económico • Resistente a la abrasión • Reduce los gastos de veterinario debidos a las caídas,

mejor detección de un animal en celo

Fijación• Tacos de golpe 8 x 80 mm con tornillo A2 +

arandela de acero inoxidable (4 tornillos por alfombra)

Referencia Dimensiones Espesor PesoCLIP SUPER 1000 x 1000 mm 18 mm 21 kg

Cara superior con rombos, muy adherente

Cara inferior ranurada

Garantía

años5 CAUCHO

NATURAL

100%

Manual

18

Confort y seguridad • Superficie superior antideslizante, hace que

los suelos húmedos sean menos resbaladizos • Aísla del frío

Higiene, mantenimiento fácil • Limpieza con chorro de agua o lavado

a alta presión• Resiste a los detergentes y a los productos

desinfectantes

Fàcil de instalar • Colocación sin fijación sobre losas de hormigón

o baldosas usadas (es posible pegarlas) • Existe en colores azul, verde, rojo y gris claro

Fiable, económica • Composición: PVC de gran calidad • Dureza 92 shores• Buena relación calidad/precio

Fijación• Cola poliuretano bicomponentes

Referencia Dimensiones Espesor Peso/m2

IDEX 500 x 500 mm 5 mm 8 kg/m²

Baldosas IDEXBaldosas antideslizantes para fondo de fosa

Sala de ordeño

Garantía

años2

Bfl-S2

Manual

19

Referencia Dimensiones Espesor PesoMB46 91 cm x 91 cm 14,5 mm 9,1 kg/pBRA45N / BRA45PRN / BRAY45N Rampas: negra / roja / amarilla 0,85 kg/p

Sala de ordeño

Cara superior

Conexiones de la cara inferior

Si es necesario, acabados posibles con rampas

Confort y seguridad • Alfombra 100 % caucho

antideslizante sobre suelo seco o húmedo.

• Importante función antifatiga, gracias a su revolucionaria cara inferior

• Aísla del frío

Higiene, mantenimiento fácil • Limpieza con chorro de

agua• Resiste a la mayoría

de los productos de mantenimiento

Fàcil de instalar • Ligera: fácil de instalar • Baldosas encastrables

Fiable, económica • Muy buena relación

calidad/precio

Baldosas MB46Baldosas antideslizantes y antifatiga

para foso de sala de ordeño

20

Confort y seguridad • Alfombra antideslizante• Alivia la fatiga de las piernas y de

la espalda• Aísla del frío

Higiene, mantenimiento fácil • Alfombra ligera, fácil de instalar

(puede retirarse para la limpieza) • Superficie inferior con tacos para el

drenaje • Resiste a la mayoría de los productos

de mantenimiento

Referencia Dimensiones Espesor PesoM69 100 x 150 cm 23 mm 15 kg

MR121,83 x 10,00 m

Otras longitudes bajo pedido 10 mm 7,4 kg/m2

M69

M69 y MR12Alfombra alveolar de caucho para fondo de fosa

Sala de ordeño

MR12: Alfombra alveolar en rollo

M69: Cara inferior sobre tacos Fàcil de instalar • Alfombra ligera, fácil de instalar • Presentación en rollo, para

una instalación práctica • Sin fijaciones

Fiable, económica • Producto muy robusto • Muy buena relación calidad/precio

21

90 mm

120 mm

120

mm90

mm

Protección de ángulo PROTECTOR

Sala de ordeño

Confort y seguridad • Protege al animal contra toda herida • Evita los deterioros en las edificaciones

causadas por los animales

Fàcil de instalar • Rápido y fácil de instalar

Referencia Dimensiones Peso

PROTECTORLongitud: 900 mm

Anchura : 120 x 120 mm3 kg/pieza

22

IDS 12

Confort y seguridad • Reduce los riesgos de

resbalones y de heridas en los animales

• Reduce el ruido del pisoteo

Higiene, mantenimiento fácil • Limpieza con chorro

de agua o lavado a alta presión

• Resiste a los detergentes y a los productos desinfectantes

Referencia Presentación Con tela Anchura Longitud Espesor Peso/m2

IDS10T Rollo Sí 1,80 m - 2,40 m A medida 10 mm 12 kg/m2

IDS12 Rollo Sí 2 m A medida 12 mm 13,9 kg/m2

IDS20 Rollo Sí 2,40 m A medida 20 mm 19,2 kg/m2

CONNECT 21 Placa No 0,91 m 1,21 m 21 mm 24,1 kg/m2

CONNECT 21 Placa No 0,91 m 1,53 m 21 mm 24,1 kg/m2

Posibilidad de corte a la medida

Una cara martilleada / Una cara con impresión textil

IDS10T/IDS12

Cara superior con rombos Cara inferior con tacos

CONNECT 21

Adaptada a todo tipo de vehículos

Transporte de ganado Alfombra para vehículo de transporte de ganado

Manual

Fàcil de instalar • Especial gran anchura: apta

para todo tipo de vehículo • Instalación libre o pegada

Fiable, económica • Producto muy robusto • Gran resistencia al desgaste

23

30 mm 195 mm

19 mm 5 mm 6 mm

Alfombra en rollo con pastillas

Bétaillère D20

Confort y seguridad • Evita los resbalones durante la subida y la bajada

de los animales • Reduce el ruido del pisoteo que provoca un estrés

en el animal

Higiene, mantenimiento fácil • Limpieza con chorro de agua o lavado a alta presión• Resiste a los detergentes y a los productos desinfectantes

Fàcil de instalar • Se coloca sobre una rampa de madera

o metálica • Fijación con tornillos o pegada

Fiable, económica • Alfombra de caucho muy robusta• Ahorro de tiempo durante la carga de los animales

Referencia Anchura Longitud Peso/m2

IDSRAMP 2,40 m 30 m 8,5 kg/m2

Posibilidad de corte a la medida

Confort y seguridad • Alfombra con la cara superior provista de pastillas

antideslizantes, en caso de pendientes importantes o de suelos de vehículos muy resbaladizos

Higiene, mantenimiento fácil • Limpieza con chorro de agua o lavado a alta presión• Resiste a los detergentes y a los productos desinfectantes

Fàcil de instalar • Colocación libre o pegada

Polivalente • Apta igualmente para los lechones, desde

el nacimiento hasta la ceba

Referencia Dimensiones* Espesor Altura de las pastillas Peso/m2

D2035 1,25 m x 10 m 3,5 mm 1,2 mm 3,85 kg/m2

D2065 1,25 m x 10 m 6,5 mm 1,2 mm 9,50 kg/m2

Cara inferior impresión textil / Cara superior con pastillas impresión textil

Transporte de ganado

Transporte de ganado

Cerdos

IDSRAMPAlfombra especial para rampa de vehículo

de transporte de ganado

Manual

24

Confort y seguridad • Adherencia excepcional, gracias a su superficie superior

en nido de abeja • Aislante fónico y térmico • Gran resistencia al desgaste gracias a sus dos pliegues

Higiene, mantenimiento fácil • Estanca e insensible a las bacterias• Limpieza con chorro de agua o lavado a alta presión• Resiste a la mayoría de productos de mantenimiento

Fàcil de instalar • Fijación libre o pegada

Polivalente • Apta igualmente para los lechones, desde el nacimiento

hasta la ceba • Utilizable en vehículo de transporte de ganado

Referencia Anchura Longitud Espesor Peso/m2

IDMAT 6 Máximo 1,5 m Máximo 50 m 6 mm 5,4 kg/m2

Una cara nido de abeja muy antideslizante

Confort y seguridad • Alfombra naturalmente caliente • Antideslizante: los orificios de la alfombra constituyen

puntos de apoyo para los lechones

Higiene, mantenimiento fácil • Eliminación del líquido amniótico por los orificios• Resiste a la mayoría de productos de mantenimiento• Limpieza con chorro de agua

Fàcil de instalar • Colocación libre

Económica • Buena relación calidad / precio• Reutilizable

Referencia Dimensiones Espesor EVA11062PERFORE 60 x 110 cm 5 mm

Espuma EVA perforada

IDMAT 6Alfombra en rollo con revestimiento textil ultra-robusta para vehículo de transporte de ganado

Alfombra de parto EVA para lechones

Transporte de ganado

Cerdos

Cerdos

Manual

Alfombra de espuma EVA

25

Nido para lechones

Strie 10

Alfombra de descanso de caucho, muy robusta, para lechones

Alfombra de caucho para lechones

Confort y seguridad • Alfombra antideslizante, gracias a su superficie martilleada• Muy buen aislante térmico• Producto difícil de desplazar para los lechones

Higiene, mantenimiento fácil • Fácil de limpiar con chorro de agua o lavado a alta presión• Resiste a la mayoría de productos de mantenimiento

Fàcil de instalar • Colocación libre• Fácil de manipular

Fiable y económico • Excelente durabilidad• Producto de caucho muy robusto

Dimensiones Espesor Peso/m2

Corte a medida 17 mm 23 kg/m2

Cara superior martilleada / Cara inferior estriada

Confort y seguridad • Alfombra que asegura un excelente aislamiento térmico• Alfombra antideslizante, gracias a su superficie martilleada

Higiene, mantenimiento fácil • Fácil de limpiar con chorro de agua o lavado a alta presión• Resiste a la mayoría de productos de mantenimiento

Polivalente • Puede utilizarse para cualquier otra aplicación

Referencia Dimensiones Espesor STRIE10 2 m x 1 m 10 mm

Posibilidad de corte a medida

Cerdos

Cerdos Otros

Garantía

años

26

Confort y seguridad • Estabilización de los terrenos • Facilita la infiltración de las aguas y evita las rodadas • Los animales siempre están en un medio seco

Fiable y económico • Gran resistencia al fuego, a las intemperies, al hielo y a los UV • Resiste hasta 350 T/m2 en el caso de circulación de máquinas

Ecológico • Montaje y desmontaje rápidos, sin herramientas especiales• Permite que crezca la vegetación

Referencia Dimensiones Espesor Peso/m2

IDSGREEN50050050 50 x 50 cm 50 mm 7,8 kg/m2

IDSGREEN50050040 50 x 50 cm 40 mm 5,6 kg/m2

IDS GreenLosa de polietileno con sistema de enganche, para estabilización de suelos exteriores

Otros

Preserva el medio ambiente

Garantía

añosManual

27

Propiedades • Antideslizante• Económico• Insonorizado

Polivalente • Protector para banco de trabajo,

suelo de coche, cabina de tractor, rampa de vehículo de transporte de ganado...

Caucho calandrado con la superficie finamente estriada

Caucho con anchas acanaladuras (estrías anchas)

Caucho con 2 caras lisas

3 acabados disponibles: estrías finas, acanaladuras anchas o ambas caras lisas

Otros

Referencia Denominación Con tela Colores Dimensiones Espesor PesoIDS6 IDS 6 No Negro 2 x 50 m 6 mm 12,2 kg/m²FINES120N Finas estrías No Negro 1,20 x 10 m 3 mm 3,3 kg/m²FINES100N Finas estrías No Negro 1,00 x 10 m 3 mm 3,3 kg/m²FINES120G Finas estrías No Gris 1,20 x 10 m 3 mm 3,3 kg/m²CANNELE120N6 Anchas acanaladuras No Negro 1,20 x 10 m 6 mm 6,5 kg/m²CANNELE100N6 Anchas acanaladuras No Negro 1,00 x 10 m 6 mm 6,5 kg/m²CCO2FL3 Caucho SBR 2 caras lisas No Negro 1,40 x 10 m 3 mm 4,38 kg/m²CCO1FL1FIT2P4 Caucho SBR 1 cara lisa / 1 cara impresión tela - 2 pliegues Sí Negro 1,40 x 10 m 4 mm 6,40 kg/m²CCO2FL6 Caucho SBR 2 caras lisa No Negro 1,40 x 10 m 6 mm 8,76 kg/m²

Para cualquier otra calidad consúltenos

Caucho multiusos en rollo

28

Otros Bandas para rascadores de purín Bandas de caucho Black Star

Banda de Calidad superior sin tela • Adaptables a todo tipo de rascadores de purín• Permite un rascado de buena calidad• Muy resistente a la abrasión

Banda de Calidad superior con 2 pliegues • Adaptables a todo tipo de rascadores de purín• Diseñada para un trabajo intensivo• Permite un rascado de buena calidad• Muy resistente a la abrasión

Referencia Dimensiones Espesor Abrasión Calidad superior sin tela BLACKSTAR 140 x 2000 mm 25 mm 100 mm3

BLACKSTAR 140 x 2250 mm 25 mm 100 mm3

BLACKSTAR 140 x 2500 mm 25 mm 100 mm3

Corte a medida

Referencia Dimensiones Espesor Abrasión Calidad superior con tela (2 telas) BLACKSTAR 140 x 2000 mm 25 mm 100 mm3

BLACKSTAR 140 x 2250 mm 25 mm 100 mm3

BLACKSTAR 140 x 2500 mm 25 mm 100 mm3

Corte a medida

• Desinfección óptima sin pérdida de productos• Fácil de instalar

Referencia Dimensiones Espesor Peso/m2

PEDILUVECC810985 810 x 985 mm 50 mm Aprox. 10,5 kg

Pediluvio rascador con picos

Pediluvio Pediluvio para la desinfección de los pies

Otros

29

Referencia Denominación Dimensiones LAN200 Cortinas 200 200 x 2 mmLAN300 Cortinas 300 300 x 3 mmLAN400 Cortinas 400 400 x 2 mmLANPROFILMUR Perfil mural 1000 mmLANPLAQUE200 Placa de fijación 200 mmLANPLAQUE300 Placa de fijación 300 mmLANPLAQUE400 Placa de fijación 400 mm

Los soportes de cortinas se entregan sin tornillería

Perfil en inoxLongitud = 1 m

Cantidad de ganchos = 24ø de los orificios de enganche = 6,2 mm

Placa de fijación Altura = 45 mm

Distancia entre ejes de los orificios = 82 mm ø de los orificios = 5 mm

Placa de 200 = 3 orificios de fijación Placa de 300 = 4 orificios de fijación Placa de 400 = 5 orificios de fijación

Longitud de los rollos: 25 m o 50 m

Perfil longitud 1 m

Juego de placas

Cortinas

82 mm

Gancho

Perfil

Placa

Contra-placa

Cortinas 300 mm

Cortinas flexibles que permiten la circulación de los animales, impidiendo las corrientes de aire

Cortinas para puertas

Otros Cortinas transparentes

30

Gama Bovinos

Productos PáginasDescanso Circulación Sala de ordeño

Cubículos Establo compar-timentado Rejillas Pasillo Muelle Fondo de

fosa Zona de espera

Quiéta 6 ★★★Quiéta rollo 7 ★★★

Séréna 8 ★★★Quiéta + 9 ★★★★

Classique 10 ★ ★★★Colchón IDS 11 ★★★

Colchón Natura 12 ★★★Colchón Florida 13 ★★★

IDS Stop 14 ★★★EASY FIX 15 ★★★

IDS 12 16 ★★★ ★★★IDS 16 16 ★★★

CLIP SUPER 17 ★★★ ★★★ ★★★Baldosas IDEX 18 ★★★

MB46 19 ★★★M69 & MR12 20 ★★★

Gama transporte de ganado Productos Páginas Suelo Rampas

IDS rollo 22 ★★

CONNECT 21 22 ★★★

IDSRAMP 23 ★★★

Gama Cerdos Productos Páginas Cerdos Rampas

Pastilla D20 23 ★★

IDMAT 6 24 ★★★ ★★Alfombra de espuma EVA 24 ★★★

Nido para lechones 25 ★★★

Strie 10 25 ★★

Las garantías de los fabricantes se aplican en el marco de una utilización normal de los productos, sin productos detergentes y sin contacto con aceites, ya sean minerales o sintéticos.La garantía es decreciente. Tiene una duración de X años (ver ficha del producto) a partir de la fecha de entrega del bien para todo defecto o vicio que afecte al material entregado. Porcentaje del valor inicial a deducir por año (garantía decreciente): Garantía de 2 años: 50 % - Garantía de 5 años: 20 % - Garantía de 10 años: 10 %. Detalle del texto de la garantía facilitado a petición.

El manual de montaje se suministra con cada entrega e, igualmente, a petición. Debe respetarse para toda instalación.La garantía de nuestros productos se anula en caso de no respetar las instrucciones del manual de montaje.

Fotos no contractuales

Las dimensiones y pesos se facilitan a título indicativo – Tolerancia: +/- 5 %

Garantía

años2

Garantía

años

Garantía

años5

Resumen

Manual

31

Condiciones generales de venta

Article 1 – Application and enforceability of the standard terms of sale IDS / ID GROUP is specialized in manufacturing and commercializing carpets, doormats and coatings (hereinafter the “Products”) to professionals established outside the French territory (hereinafter the “Buyer(s)”). The Buyer’s placing of an order entails its full and unconditional acceptance of these standard export terms of sale, which apply to the business relationship between the Buyer and IDS / ID GROUP in addition to the terms of the quotation established by IDS / ID GROUP.These standard export terms of sale prevail over any other documents, in particular over the Buyer’s standard terms of purchase.IDS / ID GROUP’s obligations can only result from these standard export terms of sales and the terms of the orders which have been expressly confirmed by IDS / ID GROUP and no conflicting term stipulated by the Buyer shall be unenforceable against IDS / ID GROUP. In the event one of the following provisions shall be determined to be invalid or unenforceable under any controlling body of the law, such invalidity or unenforceability shall not in any way affect the validity or enforceability of the remaining provisions hereof.

Article 2 – Formation of the contract Quotations made by IDS / ID GROUP are valid for two months since they are made, unless otherwise specified. The contract between IDS / ID GROUP and the Buyer is binding whether when IDS / ID GROUP receives the quotation signed and accepted by the Buyer and the payment of the deposit if any; or when IDS / ID GROUP confirms in every term and condition the Buyer’s order, IDS / ID GROUP by any way.Each order is only accepted within the limit of available stocks.IDS / ID GROUP’s acceptance of the order shall be subject to the following conditions: - no financial risk or any other element has appeared that could call the order into question, up to delivery to the Buyer’s premises of all or part

of the order; - the provision of guarantees by the Buyer, in particular, in case of incapacity, dissolution or modification of a company, mortgage of buildings,

or pledging of the client’s business; - the order is not abnormal; - the information communicated is sufficiently complete and accurate to enable the order to be filled.Any order modification by the Buyer shall only be taken into account if it reaches IDS / ID GROUP in writing within 24 hours from IDS / ID GROUP’s confirmation of the initial order and if it is technically possible.Modifications subsequent to the order may give rise to an additional charge, which shall be indicated to the Buyer for acceptance and/or cause a delay in delivering the order in question.No cancellation shall be taken into account after the contract becomes binding and the Buyer shall pay the whole amount of the order.

Article 3 – Deliveries - Acceptance 3.1. Delivery Delivery is made by delivery to a carrier in the warehouses of IDS / ID GROUP. In some cases expressly stipulated, delivery is made to the Buyer’s directly from IDS / ID GROUP’s factory3.1.1. Delivery timesDelivery times are indicated as accurately as possible, but are not binding and are based on avaibility of the stock of products and of the carriers and are dealt with in order of appearance. No overrun of delivery deadlines, nor the non-performance of an order, whether partial or total, temporary or definitive, because of circumstances beyond IDS / ID GROUP’s control may give right to damages or to cancel the order or to demand a reduction of the price.IDS / ID GROUP is authorised to make complete or partial deliveries. In the case of a partial delivery, each such partial delivery shall be deemed a complete commercial transaction. A proportional payment must be made at the time of each partial delivery. IDS / ID GROUP does its best to comply with delivery deadlines as indicated to the Customer when accepting the order, according to the standard logistics deadline in the profession, and to perform the order, except in case of force majeure or circumstances beyond its reasonable control, including but not limited to strikes, frost, fires, storms, hurricanes, floods, epidemic, problems with source of supply. 3.1.2. Transfer of the risks of losses and damagesThe Products are transported at the Buyer’s risk, including if they are dispatched carriage free to the agreed place. Unless otherwise agreed, all of the sales are made on the conditions of EXWORKS (Incoterms 2010). 3.1.3. TransportIn the event of damaged or missing Products, the Buyer shall be responsible for expressing any necessary reservations on the delivery slip and for having these signed by the carrier, dated and then, for confirming its reservations to the carrier, by registered mail with return receipt, within two (2) days following receipt of the Products and for sending a copy to IDS / ID GROUP. Failing that, the Products are deemed accepted without reservation and the Buyer shall not have any recourse.3.1.4. Transport to the international In case of international sales, the Buyer shall communicate to IDS / ID GROUP, when ordering, a list of all the necessary documents for products exportation to his state. Failing that, IDS / ID GROUP shall not be held responsible for any consequences, in particular the fees due in case customs hold the products are to be paid by the Buyer. The Buyer shall also indicate to IDS / ID GROUP, when ordering, if he wants a specific packaging for the Products or if a national rule imposes one. Failing that, IDS / ID GROUP shall not be held responsible for any consequences in case of non-conformity of the packaging.3.2. Acceptance3.2.1. Without prejudice to the measures to be taken vis-à-vis the carrier as stated in article 3.1.3, complaints concerning visible defects or on the nonconformity of the Products delivered compared to the Products ordered must be expressed in writing within three (3) days of receipt of the Products. Thereafter, no complaint or recourse shall be accepted against IDS / ID GROUP. 3.2.2. The Buyer shall be responsible for providing any proof of the existence of the defects or anomalies noted. The Buyer must do everything in its power to enable IDS / ID GROUP to formally acknowledge these defects.3.2.3. Any return of a Product must be the subject of a formal agreement between IDS / ID GROUP and the Buyer. Any Product returned without this agreement shall be kept available to the Buyer and shall not give rise to the issuance of a credit. Product return expenses and risks are always borne by the Buyer, unless the existence of the defects or anomalies is confirmed by IDS / ID GROUP.IDS / ID GROUP chooses or, at least, confirms the choice of the carrier for the return of the Products.3.2.4. Any taking back of Products accepted by IDS / ID GROUP shall give rise to the issuance of a separate credit in favor of the Buyer, after a qualitative and quantitative inspection of the Products returned. Regardless of the circumstances, no taking back of Products shall give rise to compensation or damages in favor of the Buyer. 3.2.5. The receipt of the Products without any reservation from the Buyer prevents the Buyer from any later complaint or action concerning visible defects or on the nonconformity of the Products. Besides, if the Buyer does not respect the provisions of article 3.2.1, Products are deemed to be accepted by the Buyer without reservation.3.2.6. The existence of reservations concerning the conformity of the Products or visible defects, expressed by the Buyer in the required manner, shall not suspend the payment date. The Buyer covenants not to apply withholding, penalties or compensations of any type on the amounts due for its initial order, unless so agreed in writing with IDS / ID GROUP. 3.2.7. IDS / ID GROUP waives any liability for damages that occurred during transportation of the Products, loss or theft, even though the carrier has been chosen by IDS / ID GROUP.3.2.8. Variations on size or weight, upwards or downwards, may happen due to the conditions of manufacturing of some materials. These variations do not give rise for the Buyer to any action or complaint.3.3. Suspension of deliveriesIn the event of a payment delay notwithstanding a request by IDS / ID GROUP to fulfil its contract duties within forty-eight (48) hours, IDS / ID GROUP shall be entitled to suspend all orders in progress.

Article 4 – Installation of the Products4.1. AuthorizationThe Buyer shall request and obtain all the authorizations, permits or licenses that are necessary for the installation of the Products, if any. 4.2. Buyer’s obligationsThe Buyer shall: - provide IDS / ID GROUP with accurate information for the installation of the Products, given that IDS / ID GROUP shall not be liable in case the

Buyer has misevaluated his needs ; - provide IDS / ID GROUP’s personnel with all means to access the site of installation and those necessary to carry out its task; - be aware of the local regulations about the Products in force in his country and shall appreciate the obligations he has to fulfilled and shall be

responsible for providing this information to IDS / ID GROUP; - comply with the legal provisions if any, especially regarding security and health. - remain responsible for the acts and omissions of its own personnel carrying out the necessary measures for IDS / ID GROUP to lay the Products; - take all measures that are necessary for preventing any obstacle to the installation of the Products.4.3. DeadlinesDeadlines for IDS / ID GROUP’s intervention only have indicative value. IDS / ID GROUP shall not be liable for any delay resulting from the fact that the Buyer has not fulfilled his own obligations (no provision of accurate and complete information and necessary documents or technical specifications if any, no payment in due time, modification of the order...), in case of force majeure or of any circumstance beyond the control of IDS / ID GROUP. In any case, no overrun of deadlines attributable to IDS may give right to damages or compensation or to cancel the order or to demand a reduction of the price.

Article 5 – Prices - InvoicingProducts are invoiced in Euros, at the price in effect at the time the order is placed by the Buyer, excluding VAT and any other charges when applicable, unless otherwise specified. VAT if applicable and transportation fees are due in addition, at the price in effect at the time the Products are dispatched.Every pricelist issued by IDS / ID GROUP shall only have indicative value and shall not be considered as a biding proposition. Pricelists are not fixed and IDS / ID GROUP shall be entitled to change the prices in case of economic fluctuations, given that the Buyer shall be informed of such modification before its application.Invoices are presented the day the Products are dispatched.

Article 6 –Terms of payment 6.1. Invoices are payable before dispatching the Products by bank transfer. Failing that, IDS / ID GROUP shall be entitled to suspend the execution of the order, the Buyer being responsible of the resulting delay.6.2. IDS / ID GROUP shall send to the Buyer a Proforma Invoice indicating total costs of all ordered items and terms of dispatching of the Products. The Proforma Invoice is guaranteed by the signature and seal of IDS / ID GROUP and goes to the Buyer by fax or E-mail. Said Proforma invoice is final and no change shall be accepted after sending it to the Buyer. 6.3. Any amount not paid by its due date shall give rise --automatically and without the need for prior notice-- to the payment of penalty interest, at three times the official interest rate. IDS / ID GROUP shall also be entitled to demand payment of EUR 40, as a fixed penalty clause for expenses incurred for contentious collection of the amounts due. In case the amount of these expenses is higher than EUR 40, IDS / ID GROUP shall be entitled to demand an additional penalty.6.4. In the event of a payment delay, IDS / ID GROUP shall be entitled to suspend all orders in progress and/or refuse any new order until full payment has been made, and apply a ten percent penalty of the amount remaining to be paid, without prejudice to any other means of action.Besides, the amounts due for other deliveries, or for any other reason, shall become automatically due if IDS / ID GROUP does not cancel the corresponding orders.6.5. Any worsening of the Buyer’s credit may justify a reduction of the terms of payment, demand for guarantees, or cash payment, before orders received will be filled. Failing that, IDS / ID GROUP shall be entitled to refuse any new order or to cancel the order(s) in progress.In case the Buyer orders special Products and/or non-catalog Products, IDS / ID GROUP reserves the right to demand financial guarantee or payment before the command’s process. Failing that, IDS / ID GROUP may refuse a special order.

Article 7 – Reservation of titleALL THE PRODUCTS ARE SOLD WITH RESERVATION OF TITLE AND THEREFORE OWNERSHIP OF IDS / ID GROUP UNTIL FULL PAYMENT HAS BEEN MADE.Any contrary clause, especially in general terms of purchase, is deemed to be void. The Buyer covenants to allow at any time the identification and demand for return of the Products delivered. If IDS / ID GROUP demands the return of one or more Products, the Products taken back shall be deemed to correspond to that covered by the most recent invoice and shall therefore be taken back at the value of the unpaid invoices.The Buyer, authorized to resell the Products in the normal course of its business, is bound to immediately inform IDS / ID GROUP of the seizure, in favor of a third-party, of the Products delivered without prejudice to any others.The Buyer further covenants not to pledge or assign as guarantee the ownership of the Products. If the Products are resold, it covenants to assign to IDS / ID GROUP its receivables on the sub-buyers, for the amounts due.If all or part of any of the payments agreed for the price are not made, and fifteen (15) days after notice by registered mail gone partially or completely unheeded, IDS / ID GROUP reserves the right to make the sale, or to demand the return of the Products. In the latter case, the Products must be immediately made available to IDS / ID GROUP, unless the latter demands the return of the Products at the buyer’s risk and expense. This demand may be made by any means (registered mail, fax, formal notice served by bailiff, etc.), at the Buyer’s expense and risk. The taking back of the Products shall not be deemed as cancellation of the sales contract. All amounts already paid by the Buyer (in particular, advances) shall be kept as first damages, without prejudice to any others.The above provisions shall not impede the transfer to the Buyer of the risks of losses and damages to the Products sold, pursuant to Article 3.1.2 above.

Article 8 – Intellectual Property rightsThe Buyer covenants to respect all of IDS / ID GROUP’s intellectual property rights and declares that it is fully familiar with said rights, especially trademarks, copyright and patents. No intellectual property right, whether related to the Products or to the images and logos that are applied on the Products for the Client, shall be transferred to the Client under these standard export terms of sale.The Buyer shall refrain from reproducing, or from having others reproduce, in full or in part, the trademarks, drawings and models, or any other industrial property rights held by IDS / ID GROUP, and/or from transmitting to third parties any information of any kind whatsoever permitting the total or partial reproduction of these rights if this use is not justified by the needs of its distribution activity.The Buyer shall refrain from reproducing, directly or indirectly, for its own account or for a third party’s account, the Products and/or their images or logos, whatever the method and the medium, in particular on carpets and doormats, save to the extent strictly necessary for the Buyer to carry out the promotion and the commercialization of the Products.In all cases, the Buyer shall not modify, distort, or cancel pictures or logos on the Products.The Buyer shall be responsible for breaching these obligations and shall indemnify IDS / ID GROUP against all actions on this base.The Buyer also warrants that the elements provided to IDS / ID GROUP to be reproduced on the Products, if any, does not infringe the intellectual property rights of any third party whatsoever and that they comply with law and regulations, and shall be solely responsible if not. The Buyer guarantee IDS / ID GROUP from any legal action brought by a third party on these matters, the Buyer being solely responsible.

Article 9 – Warranty9.1. The Buyer shall be responsible for checking any Product at the time of delivery and for expressing any necessary reservations or complaints concerning missing Products, visible defects or on the nonconformity of the Products delivered compared to the Products ordered must be expressed in the conditions stated in article 3 above. 9.2. The Buyer shall not have any recourse against IDS / ID GROUP for nonconformity of the Products more than fifteen (15) days after delivery.According to these standard export terms of sale, accepted by the Buyer when placing an order, the Buyer shall not be able to invoke non-conformity of the Products nor to argue against any action of IDS / ID GROUP for money recovery on this basis neither. 9.3. IDS / ID GROUP guarantees its Products against any hidden defect for one (1) year from the invoicing date, including parts and labour. 9.4. In any case, it is expressly agreed that warranty does not cover the following cases: - the defects are caused by force majeure ; - the defects are caused by inappropriate use of the Products ; - the defects are due to accidents, negligence, or normal wear and tear; - the defects have been caused by negligence or a lack of care by the Buyer; - the defects result from storage conditions incompatible with the nature of the Products; - the usage recommendations contained in the instructions have not been complied with;Moreover, warranty only applies to Products regularly acquired by the Buyer.9.5. This warranty only applies in case of hidden defects, that is to say a latent defect in the engineering or manufacturing of the Product which makes it unfit for the use for which it was intended, and that the Buyer cannot have discovered before using it. According to the warranty, IDS / ID GROUP’s sole warranty obligation is reimbursement, replace of the defective parts or repair of the latent defects, whichever IDS / ID GROUP prefers, and in no case it gives rise to compensation or damages in favor of the Buyer.In order to be admissible, any complaint concerning a Product’s hidden defect must be made within thirty (30) days following the date the Buyer discovers the hidden defect and the Buyer shall provide proof of the existence of the latent defects noted. 9.6. Replacement of defective Products or parts does not extend the duration of warranty.In some cases, IDS /ID GROUP may sign with the Buyer, acting as reseller, a consignment-stock agreement.

Article 10 - LiabilityTHE BUYER IS SOLELY RESPONSIBLE FOR ANY DAMAGE, WHETHER DIRECT OR INDIRECT, RESULTING FROM THE USE OF THE PRODUCTS. The Buyer warrants that it has subscribed an insurance policy to cover these risks. In any case, IDS / ID GROUP shall not be held liable for unforeseeable and/or indirect immaterial damages caused to the Buyer, such as, without this list being exhaustive, loss of profit, missed opportunities, loss of revenue... The Buyer will have no claim against IDS / ID GROUP for prejudice caused to third party and shall indemnify IDS / ID GROUP against any action or reclamation of a third party, resulting directly or indirectly, from the use of the Products.In any case, IDS / ID GROUP liability, when applicable, shall be strictly limited to the amount of money paid by the Buyer for the litigious order.

Article 11 – Force majeure IDS / ID GROUP shall be released from its obligations for any event outside its control that prevents or delays the delivery of the products and is deemed the contractual equivalent of force majeure.The same shall apply in case of events occurring at IDS / ID GROUP or on the premises of its subcontractors, such as lockouts, strikes, epidemics, embargos, accidents, transport interruptions or delays, inability to be supplied, raw materials defect, significant changes to the political situation in the client’s country, or any other event outside IDS / ID GROUP’s control and giving rise to a partial or total cessation of operations at IDS / ID GROUP or at its own suppliers. In a case of force majeure, IDS / ID GROUP will inform promptly and in writing the buyer of the duration of the event and of the consequences that are expected.

Article 12 – WaiverIf IDS / ID GROUP does not at a given time seek application of any one of the stipulations of these standard terms of sale, this shall not be construed as a waiver to do so at a later date.

Article 13 – Applicable law - JurisdictionAll sales made pursuant to these standard terms of sale are governed by French law, as is the business relationship between the parties. Any dispute or disagreement concerning the formation or filling of the order and/or of the business relationship between the parties shall be resolved by the competent courts in the legal district in which IDS / ID GROUP is located, unless IDS / ID GROUP prefers to refer the matter to any other competent jurisdiction.This clause shall apply, including in the event of urgent application, additional application, or if there is more than one defendant, regardless of the payment method and terms.

Article 14 - DurationThese general conditions take effect from 1 January 2017 for a period of one (1) year.In duplicate, each parties acknowledging being in possession of a copy.

THE ACT OF PLACING AN ORDER IMPLIES TOTAL COMMITMENT TO THE ABOVE-MENTIONED CONDITIONS.

azvz

Photos non contractuelles - Les dimensions et poids sont donnés à titre indicatif - Tolérance +/- 5%.

TAPISANTIFATIGUES ETERGONOMIQUES

CAILLEBOTIS CAOUTCHOUC

CAILLEBOTISPVC

DALLES CLIPSABLES PVC &POLYPROPYLÈNE

DALLES CLIPSABLES CAOUTCHOUC

ROULEAUX CAOUTCHOUC

TAPIS ISOLANT ELECTRIQUE

TAPIS DE SOUDURE

couverture-ids-ind 2016.indd 1 12/04/2016 12:05

IDS Industrie Développement Services

47, voie St Exupéry - Alpespace73 800 Francin - France

Tél : +33 (0)4 79 84 36 06Fax : +33 (0)4 79 84 36 10

[email protected]

www.ids-france.netManual www.ids-france.net

www.ids-france.netVers

ion

7

ALFOMBRAS DE CAUCHO PARA GANADERÍA

Para el bienestar del ganado,

para la tranquilidad de usted

AGRICULTURA

TAPIS CAOUTCHOUC ET REVÊTEMENTSDE SOL TECHNIQUES POUR LA MONTAGNE

AGRICULTURA

MONTAÑA

EDIFICIOS

CABALLOS

INDUSTRIA

10-2

016

La D

iffus

ion

Gra

phiq

ue -

Tél :

04

74 8

8 25

88