Annexure A 12-03-2018 · &korulghv dv µ1d&o¶ dv shu ,1' 0( 7dof 3rzghu 5v +ljk ([sorvlyhv )dfwru\ 3xqh 1rgdo 2iilfhu 6kul 0 5dmnxpdu -w *0 +ljk ([sorvlyh )dfwru\ .kdgnl 3xqh 3,1

$Page 1: Annexure A 12-03-2018 · &korulghv dv µ1d&o¶ dv shu ,1' 0( 7dof 3rzghu 5v +ljk ([sorvlyhv )dfwru\ 3xqh 1rgdo 2iilfhu 6kul 0 5dmnxpdu -w *0 +ljk ([sorvlyh )dfwru\ .kdgnl 3xqh 3,1$
Annexure-A

Test Facilities at OFB

Central Nodal Officer: Shri Rajat Paul DIR/QCS Ordnance Factory Board 10 A S.K. Bose Road Kolkata -1 Phone No. 033 22485077-80, Extn.-507 Fax No. 033-22107629 E-Mail ID [email protected]

Ordnance Factory Medak Nodal Officer: Shri. Vijay Kumar Meena, AWM Ordnance Factory Medak Yeddumailaram ,TS– 502205. Phone No.-040-23283425 & 23283635, Mobile No. 08332999284 Fax No. 040- 23292950 Email-id- [email protected] & [email protected] Factory Bank Details: State Bank of India Bank Account No. 52125372369 IFS Code SBIN0020537 MICR Code 500004183

Sl.No Test/Calibration Facility

Test / Specifications Material to be tested Rate

1. Ballistic Test Ballistic Testing (with 7.62mm& 5.56mm ammunition with various distances/ranges)

Armour Steel Plate/Aluminium/Bullet proof Canvas Cloth/ Bullet proof Glass

1. With 9mm Sten Carbine-Rs.91800/- 2. With 7.62mm SLR- RS.-92010/- 3. With 7.62mm LMG- Rs.92640/- 4. With 7.62mm Sniper-Rs. 98190/- 5. With 7.62mm AK-47-RS.-91940/- 6. With 12.7mm AD Gun-Rs.109840/- 7. With 14.5mm AMR-Rs.111760/-

2. X-Ray Machine, Magnetic Particle Inspection Machine, Dye Chemicals

Radiographic Test/ Magnetic Particle inspection/ Dye Penetrate Test

Aluminum Casting of Non-Radiographic Quality/ Ferro Alloy Item/ Ferrous, Non-Ferrous & Ceramics

Rs 2500/- for each element

3. LECO C&S Determinator

Chemical Analysis (as per ASTM E 1019-2011

Carbon Steel & Low Alloy Steel, Austenitic Stainless Steel, Tool Steel/ Cast Iron

Rs 600/- for each element

4. Universal Testing Machine

Tension and Compression (as per IS 7906 : 2004)

Springs Rs 750/- for each element

Note: The above rates are exclusive of taxes and will be charged extra as applicable.

Ordnance Equipment Factory, Kanpur Nodal Officer: Shri R.K. Verma, Jt.GM

Ordnance Equipment Factory Kanpur Phool Bagh, Kanpur PIN - 208001 Uttar Pradesh, India. Phone No: 0512-2313179

E-Mail- [email protected] Sl.No

Test Facility Test / Specifications Material to be tested Rate

1 pH Meter** pH Value (as per IS:1390-1983) Aqueous Extract Rs.588/-

2 Cone Test Apparatus Cone Test –Proofing content of Canvas and Duck (as per IS 6803:1972)

Coated Fabrics Rs.2267/-

3 Perspirometer** Chemical Analysis (Colour Fastness to Perspiration) (as per IS 971:1983)

Fabric / Tapes/ Thread/PSF/Cordages

Rs.582/-

4 Chemical Analyzer** Chemical Analysis Determination of Bound Organic

Leather Rs.2999/-

Volatile Matter Rs.552/- Chromic Oxide Rs.1188/- pH Rs.324/- water soluble Matter Rs.1895/- Total Ash etc. as per IS: 582-1970

Rs.702/-

5 Indentation Hardness** As per IS:1741-1960 Ferrous materials Rs.552/-

6 Cone Test Apparatus** Cone Test (as per IS:7941-1976) Fabric Rs.600/-

** Subject to availability of spare capacity Note: The above rates are exclusive of taxes and will be charged extra as applicable.

Ordnance Factory Kanpur Nodal Officer:

Shri Ashutosh Kumar Kushwaha, WM

Ordnance Factory,Kanpur Pin Code: 208009, U.P

Phone No. 0512-2245148, Mob: 9455351616 E-Mail ID

Factory Bank Details: UCO Bank Bank Account No. CA-03840200000511 IFS Code UCBA 0000384 MICR Code 208028007

Sl.No

Test Facility Test / Specifications Material to be tested

Rate

1 ONH Analyzer ONH content of 1gm sample in the range of 0.05 PPM to 50000 PPM with the precision of 0.025 PPM

------- Rs.1800/-

Ordnance Equipment Factory Hazratpur

Nodal Officer: Shri Raghav Gupta, WM Ordnance Equipment Factory Hazratpur Hazratpur, Dist: Firozabad State :Uttar Pradesh

Pin Code- 283103 Phone no.: 05612 – 276261 Fax No: 05612-276002 E Mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 10850295014 IFS Code SBIN0000641 MICR Code 28300210

Sl.No


1 Laundro Meter Chemical Analysis Colour Fastness to Washing with Soap or Soap and Soda

Fabric / Tapes / Cordages/ Sewing Thread/PSF/ Netting/

Rs.1049/-

Colour Fastness to Sea Water Rs.810/-

Colour Fastness to Organic Solvents Rs.820/- Colour Fastness to Rubbing (as perIS/ISO 105 (Part- C10 : 2006)/ IS 690:1988/

Rs.270/-

2 Perspiro Meter Chemical Analysis Colour Fastness to Perspiration

Fabric / Tapes/ Thread/PSF/Cordages

Rs.570/-

Fabrics (Other than Wool) –Dimensional Changes on Soaking in Water

Rs.1016/-

pH Value of Aqueous Extracts) (as per IS 971:1983

Rs.913/-

3 Thread Counter Threads per Unit Length (as per IS 1963:004)

Sewing Thread/Cordage Rs.252/-

4 Tensile Testing Machine

Tensile Properties of fabrics - Maximum force and elongation at maximum force (as per IS 1969:2009)

Fabric / Tapes / Cordages/ Sewing Thread/PSF/ Netting

Rs.743/-

5 Tensile Testing Machine

Yarn - Breaking Strength and Elongation at Break of Single Strand (as per IS 1670:1991)

Cordages/ Sewing Thread Rs.865/-

6 Breaking Strength Testing Machine

Breaking Load of Braided Nylon cords for aerospace purposes (as per IS 4227:1998)



Breaking Strength of Coated and Treated Fabrics (as per IS 7016:1981)

Coated Fabrics Rs.865/-


Breaking Load of Tyre yarns, cords and tyre cord warp sheets made from man-made fibers (as per S 4910: 1989)


9 Tearing Strength Tester

Tear Strength by the Falling Pendulum Method (as per IS 6489: 2011)

Fabrics Rs.620/-

10 Crease Recovery Tester

Recovery from creasing of textile fabrics by measuring the angle of recovery( as per IS 4681:1981)

Fabrics Rs.494/-

11 Bursting Strength Tester

Bursting Strength of Fabrics - Diaphragm Method (as per IS

Corrugated Boxes/ Netting Rs.319/-

1966:1975)

12 Cone Test Apparatus Cone Test - Special Proofed Canvas and Duck/ Pressure Head Test - Special Proofed Canvas and Duck (as per IS 6803:1972)

Coated Fabrics Rs.621/- Pressure Head Test- Rs.616/-

Ordnance Factory Muradnagar

Nodal Officer: Shri Pawanjeet Singh, AWM/QC Ordnance Factory Muradnagar Dstt. – Ghaziabad, PIN - 201206 Phone No. - 01232-232214 E-mail ID: [email protected] Factory Bank Details: State Bank of India Bank Account No. 10674451099 IFS Code SBIN0002425 MICR Code 110002367

Sl.No


Rate

1 Microscope Micro (Grain size Estimation) (as per IS 13015-1991/ IS 4748-2009/ IS 4163-2004/ IS 7754-1975)

Steel/Cast Iron 1. Macro Exam as per IS 13015- Rs.1000/- + GST as applicable 2. As per IS 4163, 4748- Rs.2000/- + GST as applicable 3. (with heat treatment) Rs.2500/- + GST as applicable 4. As per ASM VOL-7 Rs.2000/- + GST as applicable

2 Radiography Gamma Ray Cobalt T-60 Radiography (as per IS 2595-2008)

Steel Casting Rs. 2000/- + GST as applicable

Ordnance Factory Ambajhari Nodal Officer: Shri Ch. VV Narasimha Rao, WM Ordnance Factory Ambajhari Nagpur, Maharashtra Pin Code - 440021 Phone No. 07104-246845-49, Mobile No. 9764017426 Fax : 07104-246705 E- Mail ID [email protected] Factory Bank Details: UCO Bank Bank Account No. 03670200000144 IFS Code UCBA0000367 MICR Code 440028005

Sl.No

Test Facility Test / Specifications Material to be tested Rate (Cost considered for

Yr.2017-18)

1 X-Ray 320 KV** Detection of Internal flaws

Steel Rs.675/-

2 Coating Thickness Meter** Coating Thickness Zn Coating, Anodising Rs.335/-

3 Ultrasonic Flaw detector** Ultrasonic Test ------ Rs.675/-

** Subject to availability of spare capacity

Ordnance Factory Chandrapure Nodal Officer: Shri C. R. Sandeep, WM Ordnance Factory Chanda Dist- Chandrapur, Pin Code – 442501, Maharashtra Phone No. 07175-261036, 261489,261253

Mobile No. 9665686234 E-mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No.: 11013529096 IFS Code: SBIN0004711 MICR Code: 442002091

Sl.No


1 Hot Air Oven, Chemical Analyser

Volatile Matter %, Red Oxide of Iron %, Drying Time in minutes. (as per JSS – 8030 – 14 – 2009)

APC No.2 ( RD – 1192K )

Rs.4598/-

2 Muffle Furnace, Softening Point Apparatus

Ash %, Softening Point ºC, (as per JSS – 8030 – 28 – 2003)

APC No. 101 ( RD 1061 )

Rs.3706/-

3 Softening Point Apparatus

Softening Point ºC (as per JSS – 8030 – 25 – 2009)

APC No. 102 ( RD 1064 )

Rs.3685/-

4 Hot Air Oven, Muffle Furnace, Chemical Analyser

Moisture %, Loss on Ignition %, Matter Insoluble in Acid %, Carbon Tetrachloride Soluble matter %, Chlorides as ‘NaCl’ % (as per IND / ME / 236 : 2003)

Talc Powder Rs.3725/-

High Explosives Factory, Pune

Nodal Officer: Shri M. Rajkumar, Jt.GM High Explosive Factory Khadki, Pune PIN – 411003, Maharashtra Phone No:020-25821811 (O), Mobile No. 07387380935

E-Mail ID- [email protected] Factory Bank Details: State Bank of India Bank Account No. 11182905341 IFS Code SBIN0001629 MICR Code 411002005

Sl.No


1 Apparatus for Chemical Analysis**

Chemical Analysis (as per JSS 6810-127-199

4:6 Dinitro Resorcinol Rs.7601/-


Chemical Analysis as per IS 2697:1976

Ammonium Bicarbonate Rs.3584/-


Chemical Analysis as per JSS 1375-01-2012

CE Crystalline Dense/ CE Dry Dust/ CE Dry

Rs.9724/-

Gran 14/100, CE Dry Gran 36/100, CE Dry Gran 18/100,


Chemical Analysis as per IND/ME/74 & IND/ME/738 (a)

CE Primer Rs.1369/-



Gun Powder Rs.500/-


Chemical Analysis as per IS 1612:1976

Iron Powder Rs.4900/-



Lead Azide Rs.4480/-


Chemical Analysis as per IS 1089-1986

Oleum Rs.2666/-



Sodium Azide Rs.5812/-

** Subject to availability of spare capacity. Ordnance Factory Dum Dum

Nodal Officer: Mr. Manish Srivastva, WM Ordnance Factory Dum Dum Jessore Road, Dum Dum Kolkata PIN - 700028 West Bengal Phone No. 033-25694017, Mobile No. 9830889538 E-mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 1015620165 IFS Code SBIN0002054 MICR Code 700002122

Sl.No


1 Spring Load Tester Testing for Fuze Spring, Capacity-120N

Fuze Spring Rs.221/-

2 Coating Thickness Tester

Testing for non ferrous coating on ferrous surface

Non ferrous coating Rs.16/-

3 Magnetic Crack Detector

Testing for Surface crack Detector Ferrous Rs.256/-

4 XRF Machine Testing for non ferrous Chemical Non ferrous Rs.116/-

5 Universal Testing Machine**

Ultimate Tensile Strength/ Yield Strength/ % of Elongation/ % of Reduction/ Bend Test/ Share Test

Ferrous For Steel upto 6mm-Rs.952/- & for Flat & Round Bars RS.1643/-

** Subject to availability of spare capacity.

Ordnance Factory Dehradun Nodal Officer: Shri Lochan Meena, AWM Ordnance Factory Dehradun Raipur, PIN - 248008 Uttaranchal Phone No. - 0135-2785231, Mobile No. 9637422268

Fax No: 0135-2787177 E-mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 34871927327 IFS Code SBIN00003058 MICR Code 248002014

Sl.No


Rate

1 Water Proofness Testing Machine

Bundsman Water Repellency Tester & Hydrostatic Pressure Head Tester

------- Rs.1076/-

2 Refractive Index Testing Machine

Up to 1.75 Glass Rs.2151/-

3 Strain Viewer for Glass Size : 400X500 (max) Glass Rs.359/-

Ordnance Factory Bhandara Nodal Officer: Dr. O.S. Mondhe, Jt.GM

Ordnance Factory Bhandara Jawaharnagar PIN - 441906 Maharashtra, India. Phone No.07184-275416, 275733 E-Mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 11244620118 IFS Code SBIN0000328 MICR Code 441002906

Sl.No


1 Equipment/Apparatus for Stability Test **

JSS-1376-11:2008 (for Single Base) (Heat Test, B&J, MVT, Heating Test, TVM, DT, Hanzen) JSS-1376-12:2013 (for Double Base) JSG:0116:1996

Single Base & Double Base Propellants

Heat Test & TVM Rs.2500/- each & other test Rs.7000/- each 2 Chemical Analyser**

3 Equipment/Apparatus for checking of Physical Parameters** Rs.30000/- per sample

for Gun Propellant only.

Rs.30000/- per sample for Cylinder Grain of Gun Propellant & Rs.20000/- per sample Strip/Flake type Propellants.

Rs.10000/- per sample

4 Calorimetric Apparatus**

5 Closed Vessel Testing of Propellants for RF & RV**

------- -------- Rs.75000/- per sample

6 Apparatus of Chemical Tests**

As per JSS-1376-10:2010, IND/ME/604(f),

Explosives (RDX, RDX Compound, PETN, NC, NG, NC-NG Paste etc)

Rs.30000/- per sample

IND/ME/816(a), IND/ME/841(a), IND/ME/814 & JSS-1376-06:2005

7 Apparatus/ Equipment for Chemical Tests **

IND-ME-799-(A) Pentaerythritol Rs.2000/- per sample


JSS-9810-39-2013 Hexamine Formaldehyde & Purity Rs.5000/- per sample& other test Rs.2000/- per sample


IS-3366-1973 Ether Solvent Rs.2000/- per sample


JSS-9810-111-2007 Litharge Rs.2000/- per sample


CS-2163 Tin Powder Rs.2000/- per sample


Pascal-F Calcium Carbonate Rs.5000/- for purity & for other test Rs.2000/- per test


JSS-6810-145-2013 Basic Lead Stearate Rs.2000/- per test


JSS-6810-81- Carbon Black For sulphur & Iodine Rs.5000/- each & for other test Rs.2000/- each test


JSS-6810-110-2011 Potasium Sulphate Rs.2000/- per test


JSS-1375-04-2012 Nitroglycerine For nitrogen Rs.5000/- V.M.H.T. Al. Rs.2000/- each


IS-323-1959 Rectified Sprit Rs.2000/- each for specific gravity & acidity


IS-9591-1996 Esters (DAP, DBP, DEP, DOA)

Water content & purity Rs.5000/- each & other tests Rs.2000/- each

19 Apparatus/ Equipment for Chemical Tests ** Apparatus/ Equipment for Chemical Tests **

IS-1504-1996 Bees Wax For saponification value Rs.5000/- & other test Rs.2000/- each


IS-534-1992 Benzene Rs.2000/- per test

21 Apparatus/ Equipment for Chemical Tests ** Apparatus/ Equipment for Chemical Tests **

JSS-9310-06-2002 Paper white fine Ammunition

Rs.2000/- per test

JSS-1222-1968 Paper & Board Corrugated Ammunition

Rs.2000/- per test


JSS-1370-03-2002 Alluminioum Powder Heavy Gr-I

For aluminium content Rs.5000/- & for other test Rs.2000/- each


JSS-9310-01-2007 Mill Board Rs.2000/- each test


JSS-9160-08-2010 Candelella Wax Rs.2000/- each test


IND/ME/800 Cotton Yarn NE 30/2, Cotton Yarn 2/2, Cotton Cambric

Rs.2000/- each test


IND/ME/221 Cloth Viscose Rs.2000/- each test


IS 3255-1979 Tape cotton Red/White Rs.2000/- each test


IS 13262-1992 Tape Pressure Sensitive with Plastic Base

Rs.2000/- each test


IND/ME/973 Cloth Acrylic Rayon Gr. A & B

For acrylic contain Rs.5000/ & for other tests Rs.2000/- each


IS 1397-1990 Cartridging Paper Rs.2000/- each test


IS 1540 Quick Lime For total alkalinity Rs.2000/- & for available line Rs.5000/-


IS-5430-1981 Rubber Latex For rubber contain Rs.5000/-


IS-70-1980 Cuprous Oxide For cuprous contain Rs.5000/- & for other test Rs.2000/- each

34

X-Ray Testing** HEMRL/SRP/PS/272, IS:2595:1978

Propellant for Konkur Booster,

Rs. 5000/- Grain

Propellant for 68mm, Propellant for Pechora,

Rs. 7000/- Grain

Propellant for RGB-60, Propellant for RGB-12,

Rs. 5000/- Grain

Propellant for PZM, Propellant for SSEC,

Rs. 5000/- Grain

Propellant for BPC-4W-20, Propellant for EDB,

Rs. 7000/- Grain

Propellant for Mohini, Propellant for Helina,

Rs. 5000/- Grain

Propellant for 140mm Ninad, Propellant for 84mm,

Rs. 5000/- Grain

Propellant for PTA, Propellant for CLMC,

Rs. 5000/- Grain

Propellant for LRCR, Propellant for MRCR,

Rs. 5000/- Grain

Propellant for N-33 & N-44

Rs. 5000/- Grain


Machine Tool Prototype Factory, Ambarnath

Nodal Officer: Ms. Dilip Parmar, AWM Machine Tool Prototype Factory

Ordnance Estate, Ambarnath(W) Distt: Thane, PIN - 421502 Maharashtra

Phone No. 0251-2612725, Mobile No. 9049193667 E-Mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 37030449413 IFS Code SBIN0001040 MICR Code 400002131

Sl.No


1 Floating Bench Micrometer**

Inspection of Screw plug gauge and plain plug gauge ( Range 0 to 100 mm, Accuracy-0.0002)

------- Rs.125/- per dimension


Grey Iron Foundry, Jabalpur Nodal Officer: Shri S.S. Khandale, AWM Grey Iron Foundry P.O - VFJ Estate Distt. Jabalpur PIN- 482009 Madhya Pradesh Phone No: 0761 – 2766424, Mobile No. 09407823427 FAX : 0761 – 2330517 E-Mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 10571782265 IFS Code SBIN0003228 MICR Code 482002006

Sl.No

Test Facility Test / Specifications Material to be tested RAte

1 Testing Apparatus for determination of ingredients

Determination of ingredients Bituminous coal Rs.1750/- Bentonite Rs.7000/- Refractory material Rs.5000/- Dextrin Rs.7000/- Sodium silicate Rs.2100/- Phosphating solution. Rs.300/-

2 Metallurgical Microscope Metallographic structure Ferrous Rs. 3000/-

3 Spectrometric Analyzer (as per IS 15338 : 2003) Ferrous Rs. 350/- per element Rs.1000/-(4 or more element)

4 Testing Apparatus for testing of Paints

Testing of Paints Paints Rs. 10000/-

Engine Factory Avadi Nodal Officer: Smt. Sophia Varghese, Jt.GM

Engine Factory Avadi, Ministry of Defence, Avadi, Chennai – 600054. Phone No.: 044-26845110/1799, Mobile No. 9445048404 Fax No. 04426840437 Email: [email protected] Factory Bank Details: State Bank of India Bank Account No. 10372386687 IFS Code SBIN0004675 MICR Code 600002073 Sl. No.


Rate

1

Compression and Tension Testing Machine

(Load Vs. Deflection Test)Compression Springs/Extension Springs (as per IS–7906 (Part- 8) : 1989, IS–7906 (Part - 5) : 2004/ IS–7907 (Part-II) : 1976, IS–7907 ( Part-I) : 2004)

Low Alloy Steels Compression Test Rs.459/- Extension Test Rs. 459/-

2 Metallurgical Microscope General Microstructure/Macrostructure Analysis (as per IS-11371:1985(Steels) /IS-12573 :2010(Aluminium) )

Ferrous & Al. Alloys

Rs. 623/-


Heavy Vehicles Factory, Avadi Nodal Officer: Shri B. Senthil Kumar, WM

Heavy Vehicle Factory Avadi, Chennai Pin Code - 600054 Tamil Nadu Phone No: 044-26843098 E-Mail ID [email protected]

Factory Bank Details: State Bank of India Bank Account No. 10372386698 IFS Code SBIN0004675 MICR Code 600002073

Sl.No


Rate

1 Rubber Polymer Identifier Rubber Polymer Identification ( As per ASTM –E 334/D3677)

Rubber Rs.960/-

2 Erickson Cupping Test Machine

Erickson Cupping Test for Sheets (As per IS: 10175-pt-1)

---------- Rs.971/

3 Eddy Current Sorter As per equipment manual (HVF A 149) ---------- Rs.1274/-

4 Compression and Tension Testing Machine

(Load Vs. Deflection Test)Compression Springs/Extension Springs (as per IS–7906 / IS–7906

Low Alloy Steels Compression-Rs.936/- Tension-Rs.936/- Torsion-Rs.1111/-

5 Rubber Hardness Shore A(T)

Rubber Hardness test (as per IS:3400)

Rubber

Rs.468/-

6 Rubber Accelerated Aging Test (T)

Rubber Accelerated Aging Test (as per IS: 3400 pt. 4-2012)

Rubber Rs.1590/-

7 Metallurgical Microscope Microscopic Examination(Grain size Ferrous Rs.2042/-

Estimation) (as per IS 4748-1988)

8 Macro Etching Test As per IS 11371/ IS 13484 (upto Magnification 10 X for Fe)

Ferrous Rs. 1550/-

9 Microstructure of Metal As per ASTM E 3-01 / ASTM E- 407-2007/ ASTM A 247-2010/ IS: 7754-75 (Magnification 75x to 1000X)

Cast Iron Rs.1565/-

10 Metallurgical Microscope ASTM E 1077-01/ IS 6396-200/ ISO 3887 Magnification 20x to 100X (DC later from 0.02mm to 108mm)

Ferrous Rs. 1595/-

Stainless Steel Rs.1377/-

Tool Steel Rs.1340/-

Aluminium & Aluminium Alloys

Rs.1713/-

11 Torsion Spring Tester** As per product Drawing -------- Rs.1111/-


Rifle Factory Ishapore Nodal Officer: Shri Anupam Ghosh, JWM Rifle Factory Ishapore P.O. - Ichapur- Nawabganj Distt. 24 Parganas (North) PIN- 743144 West Bengal. Phone No: 033 – 25963516, Mobile No. 91639493 FAX: 033 - 25937200 E-mail ID: [email protected] Factory Bank Details: State Bank of India Bank Account No. 11278710309 IFS Code SBIN0000029 MICR Code 700002214

Sl.No


1 Micro Testing Estimation of grain size (as per IS 4748- 2009)

Metals and Alloys

Rs.1100/-

Ordnance Factory Badmal, Bolangir Nodal Officer: Shri Mohan Agrawal, WM

Ordnance Factory Badmal At/PO. BADMAL DIST. BOLANGIR PIN - 767070 Orissa, India. Phone No: 06655-252032, Mobile No. 8763825735 Fax No. 06655-250561, 250271

E-Mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 10793974179 IFS Code SBIN0008703

MICR Code 767002004 Sl.No


1 Chemical Analyzer**

Chemical Analysis as per GOST:1905-69/ JSS: 1376-09-1994/ JSS:1975-06:2005.

Dex. Lead Azide Pure Lead Azide Lead Styphnate

Rs.5760/- Rs.5760/- Rs.5760/-


Chemical Analysis as per IND/ME/993, IND/ME/992, IND/ME/820.

S-243 Composition BT-4 Composition ME-412 Composition

Rs.5760/- Rs.3840/- Rs.3840/-


Chemical Analysis as per JSS:6810-59:2010 IND/ME/794/ JSS:6810-96:2011 JSS:9620-01:2010 JSS:1376-05:2005.

Barium Chromate, Barium Peroxide Gr.-I, Graphite Dry & Graphite Sulphur free , Gun Powder G-7

Rs.5760/- Rs.5760/- Rs.5760/- Rs.5760/-


Chemical Analysis as per JSS:1376-05:2005/ JSS:6810-96:2011/ JSS:6810-123:2008/.

Gun Powder G-12, G-20, G-40 Lead Acetate powder

Rs.5760/-


Chemical Analysis as per JSS: 8010-63:2004 APC (Shellac Based) APC-201, 202, 211, 218, 222-226/ Sodium Azide/ Lead Nitrate/ Sodium Nitrite/

Rs.5760/-

AGS Soln for TZ/ Magnesium Styphnate/ Sodium Azide/ Lead Acetate

Rs.3840/-


Chemical Analysis as per JSS:1370-03:2007 Al. Powder Heavy Gr.-I Rs.9600/-


Chemical Analysis as per JSS:6810-71:2008/ JSS:6810-120:2009/ JSS:6810-120:2009/ IND/ME/21(a)/ JSS:8030-09:2010/ IS:559/ IS:10744:2001

Antimony Sulphide Magnesium Powder Mercury Resorcinol

Rs.5760/- Rs.7680/- Rs.1920/- Rs.3840/-


Chemical Analysis as per JSS:8010-48:2012/ JSS:8030-19:2003/ JSS:8030-24:2011)

APC-7, APC-11

Rs.3840/- Rs.1920/-


Chemical Analysis as per ID 380:1978 Talc Powder Rs.3840/-


Chemical as per JSS:6810:133:2001 Zinc Stearate Rs.5760/-


Ordnance Factory Dehu Road, Pune Nodal Officer: Shri Niranjan Yadav, Jt.GM

Ordnance Factory Dehu Road PIN - 412101 Maharashtra Phone No: 020-27167211, Mobile No. 9403171115

E-Mail Niranjan . Yadav @ofb.net Factory Bank Details: State Bank of India Bank Account No. 11217965270 IFS Code SBIN0000569 MICR Code 411002031

Sl.No

Testing / Calibration Facility Test / Specifications Material to be tested

Rate

1 Illumination Calorimeter C-3300** Full screen 70mm dia L - 1333 cd/meter square

------- Rs.1976/-

2 Bump Test ** Model DBTM - 1510

04 Input channels 1 to 100 pc/g for Igniter bumb

------- Rs.1904/-

3 Environmental Test Chamber** Hot & Cold Chamber Make - Classic

Hot upto 70 degree celcius Cold upto - 50 degree celcius

------- Rs.9665/-

4 Dead Weight Pressure Gauge Tester **

for checking of pressure gaugesL.P. - 1 to 65 kg/cm squareH.P. - 60 to 700 kg/cm squareAccuracy - + 0.1%

gauges Rs.853/-

5 Dead Weight Vacuum Gauge Tester **

for checking of Vacuum gauges.- 50 to -710 mmHgAccuracy +0.1%

gauges Rs.853/-

6 Mass Standard & Balance of Appropriate accuracy **

for calibration of weight boxup to 200gm (F2 class)1 mg to 200 gmF1 class

------- Rs.2560/-

7 Analytical Weighing Balance** Standard steel weightsfor calibration of Analytical Weighing Balance1 mg to 200 gmF1 class

------ Rs.2560/-

8 Various Apparatus for chemical analysis**

IS 1420-1989 Magnesium Carbonate Light

Rs.2389/-

IS-5671 1984 Strontium Nitrate

Rs.4300/-

IS: 2307- 2004 Magnesium Powder

Rs.3344/-

IS:708:1987 Potassium Chlorate

Rs.3344/-

IND/ME/794(b) Barium Chromate

Rs.2389/-

JSS 6810-59-2010 Barium Nitrate ( C )

Rs.13487/-

JSS 6810-82:2011 Zinc Oxide Rs.3344/-

JSS 6820-02:2012 Dye Oil Orange

Rs.2389/-

JSS 6810-99-2011 Hexachloroethane Powder

Rs.2389/-

JSS: 8010-63:2012 APC No.224 ( C )

Rs.2389/-

JSS: 8010-63:2012 APC No.225 ( C )

Rs.2389/-

JSS: 8010-63:2012 APC No.226 Rs.2389/-

9 Vibration Testing Machine ** (Electro Dynamic Vibration System

Upto synchronised channels frequency range1 Hz to 5000 HzFor random & size

___ Rs.1886/-


Gun Carriage Factory, Jabalpur

Nodal Officer: Shri. Harshit Agarwal,AWM Gun Carriage Factory Distt.- Jabalpur, PIN- 482075 Madhya Pradesh. Phone No: 0761- 2712463 Fax : 0761-2331495 E-Mail ID: [email protected] Factory Bank Details: Central Bank of India Bank Account No. 1540221697 IFS Code CBIN0280742 MICR Code 482016007

Sl.No


1 Ultrasonic Flaw Detector

Ultrasonic detection of Internal Flaws, Surface & Sub-Surface Flaws (as per IS: 8791-78/ IS: 3664-81/ IS: 4225-04/ IS: 9565-95/ IS: 12666-1998/ IS: 4904-90)

Metallic Material Component & Forgings

Rs.2000/-

Ordnance Parachute Factory, Kanpur

Nodal Officer: Shri Sunil Chaturvedi, Jt.GM Ordnance Parachute Factory Kanpur, Uttar Pradesh Pin - 208004 Phone No. 0512-2327901-03

Mobile No. 08081116957, 8004938536 Fax No. 0512-2321436

E-mail ID: [email protected] Factory Bank Details: State Bank of India Bank Account No. 30093790846 IFS Code SBIN0001692 MICR Code 208002018

Sl.No


1 Reciprocating Movement Tester for Zip

Reciprocating Movement Test (as per IS:1481 (Part-2):2002)

Plastic slide fasteners Rs.576/-

2 Demattia flexing Tester Resistance to Damage by Flexing (as per IS:7016 (Pt-4)-1987)

Fabric Nylon PU coated Rs.768/-

3 Crease recovery Tester Crease Recovery Test (as per IS:4681-1981)

1. Cloth Plain weave Dope Dyed DD OG 2. Cloth Plain weave Dope Dyed DD Sky Blue

Rs.1152/-


Ordnance Factory Itarsi

Nodal Officer: Shri Shekhar Pandey, AWM Ordnance Factory, Itarsi (M.P) Phone No. 07572232131 E-mail I.D [email protected] Factory Bank Details: Central Bank of India Bank Account No. 1785446884 IFS Code CBIN0282078 MICR Code 461016001

Sl.No


1 Chemical Analyzer Strength % min. Free SO3 % min. (as per IS:1089-1986)

Oleum for the mfr. of mixed acid for NG

Rs.5135/-

2 Chemical Analyzer Strength of A&B (as per IS:266-1993) Concentrate Sulphuric Acid Technical A&B

Rs.5135/-

3 Chemical Analyzer Weak Nitric Acid (as per IS:264-1976) Strength % as HNO3

Rs.5135/-

4 Chemical Analyzer Residual Sulphuric Acid (as per IS:266-1993)

Strength % as H2SO4 Rs.5135/-

5 Chemical Analyzer Strong Nitric Acid Technical grade A,B & C (as per IS:264-1976)

Strength as Nitric Acid % Nitrous content %

Rs.5135/-

6 Chemical Analyzer** Chemical analysis as per JSS-6810-95-2007 JSS-6810-110-2011 IS-229-1993 IS 301-1982 JSS-9620-01-2001

Guanidine Nitrate Rs.21056/-

Potassium Sulphate Rs.32484/-

Ethyl Acetate Rs.21656/- Potassium Nitrate Rs.43012/- Graphite Rs.20856/-


Ordnance Factory Katni

Nodal Officer: Shri J.B.Meshram, Jt. GM Ordnance Factory Katni PIN - 483503 Madhya Pradesh, India.

Phone No: 07622-227849, Mobile No. 9098804247 Fax No: 07622-224082, 221605 E-mail ID: [email protected] Factory Bank Details: State Bank of India Bank Account No. 10589587208 IFS Code SBIN0000405

MICR Code 483002002 Sl.No


Rate

1 Metallographic testing Machine

Macro etch test for Cu & its alloys

Non-Ferrous Material

Rs. 3382/-

Micro structural analysis of Cu & its alloys

Rs. 4787/-

Grain size determination of Cu & its alloys by comparison method (as per IS 13484-1992, IS 7739 -1975, IS 4748-1988, (RA 2003)

Rs. 4787/-

2 Non Destructive Testing Machine

Radiographic test (as per IS 2595-1978)

Non-Ferrous Material

Rs.1231/-

Metal And Steel Factory, Ishapore

Nodal Officer: Dr. R.N.Jha, DGM Metal and Steel Factory P.O. - Ichapur- Nawabganj PIN- 743144 West Bengal. Phone No: 033-25938400, Mobile No. 9831269580 E-mail ID: [email protected] Factory Bank Details: State Bank of India Bank Account No. 11278710321 IFS Code SBIN000029 MICR Code Not Available

Sl.No


1 Fracture Toughness Testing Machine

Fracture Toughness Test 9 (as per ASTM E 399-09 &ASTM E 1820-09)

Gun Barrel/ High Strength Alloy Steel Material

Rs 3300/-

2 Metallurgical Microscope Macro Examination, Grain Size, Micro structure (as per IS: 13015- 1991&IS 13484:1992)

Steel & Brass Sample

Rs.1595/-

3 Chemical Analyser** Arsenic (As)/ Antimony (Sb) (As per ASTM E-415 & 1086)

Water Rs 785/-


Small Arms Factory,Kanpur

Nodal Officer: Shri B.Mishra, AWM Small Arms Factory Kalpi Road, Kanpur PIN - 208009 Uttar Pradesh Phone No: 0512-2222980, Mobile No. 9455360066 Fax No. 033-22107629 E-Mail ID [email protected]

Factory Bank Details: UCO Bank Bank Account No. 03840200000150

IFS Code UCBA0000384 MICR Code 208028007

Sl.No


1 Chrome Plating** Analysis of Chrome Plating Solution

Hexavalent, Trivalent, Total Sulphate, Total Oxide, Iron Oxide

Rs.4500/-

2 Testing Apparatus for determination of Ingredients**

Determination of Ingredients Phosphating solution. RS.500/-

3 Crack Detection ** Magnetic particle inspection ---------- RS.500/-

4 Spring Load Testing Facility**

Load Testing Spring Spring RS.200/-


Opto Electronics Factory, Dehradun

Nodal Officer: Shri S.K. Ukil, AWM Opto Electronics Factory Raipur, Dehradun PIN - 248008 Uttaranchal Phone No.0135-2789769, Mobile No. 9411106957 Fax No. 0135-2787181 E- Mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 10202561269 IFS Code SBIN0003058 MICR Code 248002014

Sl.No


Rate

1 Hot & Cold Chambers Chamber Work Space/Size : 95 cm X 110cm X 95cm Capacity : 1000 liters Testing Range : -400C & +1800C

------- Rates/hour Rs.712/-

2 Hot & Cold Chambers Chamber Work Space/Size : 3000 mm X 2000mm X 2000mm Capacity : 12000 liters Testing Range : -500C & +1200C

-------

3 Thermal Shock Chambers Chamber Work Space/Size : 1000 mm X 1000mm X 1000mm Capacity : 1000 litres Testing Range :Humidity - 30% to 98% Temperature : +200C to +600C

-------

4 Vibration Testing Machine Maximum load capacity = 280 Kg at 5 ‘g’

-------

5 Vertical Impact Testing Machine Maximum load capacity = 250 Kg at 150 ‘g’

-------

6 3-D Impact Testing Machine Maximum load capacity = 150 Kg at 100 ‘g’

-------

7 Optical bench Resolving Power,Focal Length (100 mm to 1000 mm)

Optical instrument, lens,

& prism

Rs.613/- each

8 Theodolite Angle Measurement (1 to 3600) ------- Rs.18284/-

9 Collimeter Light Transmission(4000 nm to 7000 nm)

mirror, glass plate, optical devices, lens, prism

Rs.613/-

10 Diopter Lens Set Measurement of Diopter(+/- 0.5 Diopter to +/- 5 Diopter)

Lens Rs.5482/-

Ordnance Factory Ambernath

Nodal Officer: Shri G. Ravi Kumar Iyer, AWM Ordnance Factory Ambernath Kalyan - Badlapur Road, Dist: Thane Maharashtra - 421502 Ph: (0251) 2616389, Mobile No. 7775046925 Email ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 00000010844194127 IFS Code SBIN0001040 MICR Code 400002131

Sl.No

Test/Calibration Facility Test /Calibration/ Specifications Material to be tested

Rate

1 Stereo Microscope Macroscopic Examination (as per IS 12573 – 1988&ASTM E 112 – 2012)

Non-Ferrous Rs.1500/-

2 Metallurgical Microscope Microscopic Examination (Grain size Estimation) (as per IS 4748-2009)

Ferrous Rs.2000/-

3 Salt spray Apparatus Apparatus Corrosion Resistance Ferrous Rs. For 24 hrs. Rs.1000/- per sample

4 Ultrasonic Flaw Detector Ultrasonic Test (upto 5 meters length) ------ Sample of simple Geometry Rs.1000/-

5 Slip Gauges & Instruments

Calibration of Gauges ------ Rs.3810/-

6 Plug Gauges Calibration of Chamber Gages ------ Rs.18287/-

7 Slip Gauges Calibration of Instruments ------ Rs.1524/-

8 Dial Testing Machine Calibration of Dial gauge ------ Rs.762/-

9 Shadow Graph Machine Checking of Form ------ Rs.381/-

10 Floating Micrometer Instruments & Profile projectors

Checking of Screws Dimensional inspection of dies/punches and profiles of threads

------ Rs.572 /-

------ Dies (Taper)-Rs.27430/- Punch-RS.5334/- Profile of Threat-Rs.582/-


Ordnance Factory Tiruchirappalli

Nodal Officer: Smt. S. Ramakrishnan, WM Ordnance Factory Tiruchirappalli PIN- 620016 Tamilnadu. Phone No: 0431 – 2581291 to 96 (6 lines)(Extn-238), Mobile No. 9710117868

FAX: 0431 - 2581136 Email ID: [email protected] and [email protected] Factory Bank Details: State Bank of India Bank Account No. 00000057033388650 IFS Code SBIN0070759 MICR Code 620002061

Sl.No


1 Optical Emission Spectrometer

Chemical Analysis (as per IS 8811:1998 / IS 9879:1998)

Low Alloy Steel & Plain Carbon Steel/ Stainless Steel

Rs.2550/-

2 Universal Testing Machine

Ultimate Tensile Strength/ Yield Strength/ % of Elongation/ % of Reduction in C/S Area (as per IS-1608 : 2005)

Ferrous & Non Ferrous Rs.2550/-

3 Hardness Testing Machine

Hardness (Brinell) (as per IS 1500 Pt 1 2013)

Ferrous & Non Ferrous ( C )

Rs.1500/-

4 Impact Testing Machine

Impact Load (Izod/ Charpy) (as per IS 1598-1977)

Ferrous & Non Ferrous Rs.2000/-

Heavy Alloy Penetrator Project,Tiruchirappalli Nodal Officer: Shri R. V. Dwarakanathan, HOS/QA Section, Heavy Alloy Penetrator Project, Tiruchirappalli, PIN – 620 025 Tamil Nadu, India. Telephone No: 0431-2581803, Ext. 238. Telefax No.: 0431-2581891 Email ID: [email protected]

Sl.No


1 Atomic Absorption Spectrophotometer

Chemical Analysis Tungsten powder/ Nickel Powder/ Molybdenum Powder/ Iron powder/ Cobalt Powder/ Tungsten blended Powder/ Steel Alloys

Rs.2185/-

Vehicle Factory, Jabalpur

Nodal Officer: Shri. V.K.Gupta, JWM Vehicle Factory Jabalpur, PIN- 482009, Madhya Pradesh. Phone No: 0761- 2792655 FAX: 0761-2330436 Email ID: [email protected] Factory Bank Details: Central Bank of India Bank Account No. 3286524845 IFS Code CBIN0280742 MICR Code 482016007

Sl.No

Test /CalibrationFacility

Test / Specifications Material to be tested Rate

1 Compression and Tension Testing Machine**

(Load Vs. Deflection Test)Compression Springs/Extension Springs (as per IS–7906, IS–7907

Compression and Tension Testing Machine

Rs.475/-

2 Metallurgical Microscope**

Estimation of Gain size by comparison Method (as per IS: 4748 & IS 4163)

Steel sample Rs.1724/-

3 Accelerated Ageing Tester for Rubber**

as per IS 3400 Rubber Rs.8974/-

4 Determination of affect of liquid for Rubber**

as per IS 3400 Rubber Rs.8974/-

5 Calibration Facility** Calipers /External Micrometer/Gear Teeth/Plunger type Dial/Plain Gap Gauge/ Plain Gauge/ Thread Plug Gauge/ (as per IS:3651/ IS:2967/ IS:2092/ IS:3455/ IS:7876/ IS:3455/ IS: 7859/ IS:4218/ IS:2334)

------------

Rs.713/- (Caliper) Rs.475/- (External Micrometer) Rs.951/- (Gear Teeth Micrometer) Rs.832/- (plunger type dial indicator) Rs.654/- (Snap gauge) Rs.535/- (Plain Gap Gauges) Rs.951/- (Thread plug gauge)


Gun & Shell Factory, Cossipore

Nodal Officer: Mr. Mufidul Islam Khan, WM Gun & Shell Factory, Cossipore,

Kolkata – 700002. Phone No. 033-25589928, Mobile No. 9445981386 Fax No. 033-25574390 E-mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 00000010161080171 IFS Code SBIN0001895 MICR Code 700002074

Sl.No


1 Wet Analyzer Chemical Analysis(as per IS 228 (Pt.1,2,3,5,6,8,9)’87

Steel borings/ Plane Carbon/ Low Alloy Steel

Rs 1000/- per element + GST as applicable

2 Optical Emission Spectrometer**

Chemical Analysis (as per IS 8811: 1988(RA 2012) / ASTM-E-1507-98/ IS: 7658-75)

Ferrous & Its Alloys Rs 1200/- per element + GST as applicable

Copper & Its Alloys Rs 1350/- per element + GST as applicable

Aluminum & Its Alloys Rs 1350/- per element + GST as applicable


Field Gun Factory, Kanpur Nodal Officer: Shri Ahtasham Akhtar, Jt.GM

Field Gun Factory Kanpur Kalpi Road PIN - 208009 Uttar Pradesh Phone No: 0512-2212374

E-Mail ID [email protected] Factory Bank Details: UCCO Bank Bank Account No. 03840200000162 IFS Code UCBA0000384 MICR Code 208028007

Sl.No


1 Hardness Testing Machine**

Hardness (Vickers/ Brinnel/ Charpy U & V) (as per IS 1501/ IS: 1500 / IS: 1499 & IS:1757)

Metals and Alloys

Brinnel-Rs.519/-

2 Fracture Toughness Testing Machine **

Fracture Toughness Test (as per ASTME 399)

Gun Barrel/ High Strength Alloy Steel Material

CT(25) Rs.6228/- CT(40) Rs.12457/-


Cordite Factory, Aruvankadu Nodal Officer: Shri M. Thamizh Selvan, Jt.GM Cordite Factory Aruvankadu Aruvankadu, The Nilgiris, PIN - 643202 Tamil Nadu, India. Phone No. : 0423 – 2230151, Mobile No. 9442661903 Fax: 0423 - 2231923 E-mail ID : [email protected] Factory Bank Details: Canara Bank Bank Account No. 1044201000145 IFS Code CNRB0001044 MICR Code 643015103

Sl.No


1 Equipments/Apparatus for Chemical Tests **

JSS 6810:125:2008 Carbamite Rs.19080/-


Ordnance Clothing Factory Avadi

Nodal Officer: Shri N.N.Sardar, WM Ordnance Clothing Factory Avadi Chennai, Tamil Nadu

Pin - 600054 Phone No. 044-26365014, Mobile No. 984167668 Fax: 044 - 26381701 E-mail ID [email protected]


Sl.No


1 pH Meter pH Value (as per IS:1390-1983) Fabrics / Tapes / Cordages Rs.390/

2 Cone Test Apparatus

Cone Test (as per IS:7941-1976) Fabric Rs.640/-

3 Chemical Analyzer Blend Composition% Binary mixture of polyester fibre with cotton (as per IS:3416 – 1988&IS:2006-1988)

Fabric Rs.1290/-

4 Shrinkage Template & Water Try

Shrinkage % After Soaking in Soap Soda Solution (as per App `A` of IND/TC/2089a)

Coated Fabrics Rs.510/- loss in Mass- Rs.770/-

5 Curing Test Apparatus

Curing Test ( as per IS:8543) Buttons Rs.260/-

6 Soxhlet Apparatus Scouring Loss % (as per IS:1383) Fabric Rs.770/-

7 Microscope Fibre Identification (as per IS:667-1981) Sewing Threads / Cordages

Rs.260/-

8 Magnifier Glass/ Counting Glass

Ends & Picks /cm Fabric/Tape Rs.170/-

9 Mass/Unit Area IS 1964-2001 method (A) reaffirmed 2006 Fabric Rs.260/-

10 Breaking Load(Raveled Strip method)

(as per IS:1963- 2004, IS:1964-2006&IS:1969-1 : 2009)

Coated Fabric Rs.390/-

11 Precision Balance 0.1-300g

Mass/Square Meter Coated Fabric Rs.260/-

12 Digital Screw Gauge

Diameter / Overall thickness (as per IS:1461 – 1984)

Buttons Rs.130/-

13 Digital Screw Gauge

Thickness, Flap bend test (as per IS:1060-1966, Clause 14.2 of CQA(GS)/US/460),

Packing Boxes Rs.130/-

Mass/unit area Rs.260/- 14 Tensile Testing

Machine (Single Yarn)

Shearing Strength (as per IS:8156 -1994) Fastener Hook & Loop Rs.260/-

15 Drape Meter Soxhlet Apparatus

Drape Co-efficient (as per IS : 8357) Fabric

Rs.260/-

Water Soluble Matter, Rs.1030/- Scouring Loss (as per IS:3456 & IS:1383) Rs.770/-


Ordnance Clothing Factory Shahjahanpur Nodal Officer: Shri Chander Shekhar, Jt.GM

Ordnance Clothing Factory Shahjahanpur PIN - 242001 Uttar Pradesh, India.

Phone No. 05842-223106 & 05842- 281456 Mobile No. 9415407268

Fax No. 91-5842-223328, 281387 E-mail ID [email protected]


Sl.No


1 Chemical Analyzer** Composition Binary mixture of Acrylic (as per IS:3421)

Yarn/ Fabric Rs.1988/-

2 Dry Wash** Colour Fastness to Dry Washing (as per IS:4802)


3 Digital Wash** Colour Fastness to Washing (as per IS/ISO 105-C 10:2006)

Yarn/ Fabric Rs.108/- to Rs.1073/-

4 Hot Pressing** Colour Fastness to Hot Pressing (as per IS:689)


5 pH Meter** pH Value (as per IS:1390) Yarn/ Fabric Rs.713/-

6 Leveling Test Equipment**

As per IND/TC/0048 © Fabric Rs.1089/-

7 Shrinkage Tray** Relaxation Shrinkage (as per IS:2977& IS:665)

Fabric Rs.357/-

8 Magnifier Glass/ Counting Glass**

Ends & Picks /cm , Mass/Unit Area& Breaking Load(Raveled Strip method) (as per IS:1963, IS:1964)

Fabric Rs.357/-

9 Demattia flexing Tester**

Mass/Sq Meter (as per IS:7016 (Pt-4)

Fabric Rs.713/-

10 Linier Density Measuring Apparatus**

Linier Density as per IS:681 Yarn Rs.713/-

11 Bursting Strength Tester **

Bursting Strength as per IS:1966 Fabric Rs.357/-

12 Shrinkage Tray** Relaxation Shrinkage (as per IS:2977)

Fabric Rs.357/-

13 Equipment for Testing of Turns/dm**

As per IS:832-1985 Yarn Rs.357/-

14 Demattia flexing Tester**

Resistance to Damage by Flexing (as per IS:7016 (Pt-4)-1987)

Fabric Rs.713/-

15 Thickness Tester** Thickness under pressure of 0.7 & 7.0 gm/sq cm, as per IS:7702

Batting Polyester Rs.357/-

16 Equipment for Testing of Resistance to Blocking **

As per TSRDE/70/54 Batting Polyester Rs.1427/-

17 Equipment for Testing of inter locking of Tex. Chain to Lateral Load**

As per IS: 14181 (Pt-2) Append. B Garniture Rs.357/-

18 Equipment for Testing of Top Stop**

As per IS:14181 Garniture Rs.357/-

19 Equipment for Testing of Bottom Stop**


20 Equipment for Testing of Puller & Slider**


21 Equipment for Testing of Slider to Lock Holding**


22 Equipment for Testing of Fastner**



Ordnance Factory Bhusawal Nodal Officer: Shri Ankit Durkhure, WM

Ordnance Factory Bhusawal District Jalgaon PIN - 425203 Maharashtra, Phone No: 02582-222431, Mobile No. 8605257131 Fax No. 02582- 223309 E Mail ID: [email protected]


Sl.No


1 Hardness Tester** Hardness of Rubber as per IND/ME/584(f)

Rubber Rs.405/-

2 Various Chemical Apparatus **

Viscosity/ Pressure/ Resistance to corrosion & humidity/ Dying Time (as per IS: 101)

Paint Rs.405/-

3 Scratch Hardness Tester** Scratch Hardness Test as per IS: 101

Paint Rs.539/-

4 Flexibility & Adhesion Tester**

As per IS: 101 Paint Rs.539/-

** Subject to availability of spare capacity Ordnance Factory Varangaon

Nodal Officer: Shri Vijay Kuraria, WM

Ordnance Factory Varangaon P.O. - O .F. VARANGAON DIST: JALGAON PIN - 425308 Maharashtra, India. Phone No: 02582-282228, Mobile No. 9407883677 E-Mail ID [email protected]


Sl.No

Test Facility Test / Specifications Material to be tested Rate (Rates per sample excluding 18% GST (for Yr.2017-18)

1 Apparatus of Chemical Tests

(As per IND/ME/960:2014) Primer Rs.18674/-


(As per IND/ME/1020 (PROV):2014

Igniter Composition ME 508/ Sub-Igniter Composition ME 509 for 5.56mm

Rs.18674/-


As per IND/ME/749, IND/ME/750/ IND/ME/751

ME-407 for 7.62 mm Rs.19517/- ME-408 igniter for 7.62 mm

Rs.22889/-

ME-409 sub-igniter for 7.62mm

Rs.23732/-

4 Chemical Analyzer ** Strength of A&B (as per IS:266-1993)

Concentrate Sulphuric Acid Technical A&B

Rs.16693/-

5 Chemical Analyzer** Chemical analysis as per JSS-6810-104-2005 JSS-6810-80-2003 JSS-6810-59:2001

Sodium Nitrite Rs.18746/- Lead Nitrite/ Rs.19527/- Soda Ash Rs.17752/-

** Subject to availability of spare capacity Ordnance Cable Factory Chandigarh

Nodal Officer: Shri Sanjeev Kumar Agrawal, Jt. GM Ordnance Cable Factory Chandigarh 183, Industrial Area Phase-1 PIN – 160002, Chandigarh Phone No: 0172-265048, Mobile No. 9599331438

E-Mail ID [email protected] Factory Bank Details: State Bank of India Bank Account No. 36454283020 IFS Code SBIN0001443 MICR Code 160002017

Sl.No Test Facility Test / Specifications Material to be tested

Rate/Hour

1 Universal Testing Machine Ultimate Tensile Strength of wires upto 7mm diameter and insulated Cable.

Wire & cable Rs 1300/-

2 Torsion Testing Machine Torsion Strength of metallic wire up to 5mm diameter.

metallic wire Rs 1300/-

3 Environmental Test Chamber

Conditioning test in temp range –ve 40⁰C to +ve180⁰C

----- Rs 1100/-

4 Cold Chamber / Sub-Zero Chamber

Conditioning up to -60⁰C ----- Rs 1200/-

5 Breakdown Tester High Voltage Test DC: 12KV / AC: 6KV

Cable Rs 1200/-

6 IR Measuring Set Insulation resistance of Cable from 01MΏ to 10 TΏ

Cable Rs 1100/-

7 AC HV Test Set High Voltage test up to 18 KV AC

Cable Rs 1100/-

8 Attenuation Measuring Instrument

To measure attenuation constant in Frequency range of 0.2 to 1600 KHz for communication cables

Cable Rs 1100/-

9 H.V. Tester High voltage testing of Cables up to 4.4 KV AC

Cable Rs 1400/-

10 Mech. Convection Oven High voltage testing of cables Cable Rs 1100/-

up to 5 KV AC

11 AC HV Test Set Mutual capacitance of cable up to 30 KHz frequency

Cable Rs 1100/-

12 Mutual Capacitance measurement

Hot test up to 200⁰C Cable Rs 1100/-

13 Glass Thermometer Temperature measurement up to 360⁰C

Cable Rs 1100/-

14 Melt flow index Test Set Melt flow index of polymers up to 300⁰C

Cable Rs 1100/-

15 Portable Wheatstone Bridge Conductor resistance measurement from .001Ώ to 10MΏ

Cable Rs 1100/-

16 Vibration Test Machine Vibration testing with frequency range upto 2.2KHz Shaker

Rotation ±90⁰

Cable Rs 1100/-

17 Bump Test Machine Bump testing with impact test

Acc. 35g. 1000 impect. 100±15 tmp/min

Cable Rs 1200/-

Ammunition Factory Khadki, Pune

Nodal Officer: Shri Vishal Bedi, WM Ammunition Factory Khadki, Pune Phone No: 020-25922055, 25922536, Mobile No. 7776815698 Fax No. 020-25813205, 25821875 E-mail ID: [email protected]


Sl.No


1 Dessicator, Glassware, Oven & vacuum pump for gravimetric analysis

Volatile Matter Explosive/ Delay Composition ME-412(M)

Rs.889/- Barium Chromate Rs.1410/- Antimony Sulphide Rs.4354/- Potassium Perchlorate Rs.1592/- Nitro Cellulose Rs.1352/- (as per IND/ME/820 (a) 2008 DC 3893-ME)

2 Lead Fuze Rolling Equipment

Lead Fuze Burning Test Gun Powders.

Rs.2995/-

3 Puffing time & Temp. Equipment

Determination of Puffing time and temperature

Cellulose Nitrate sheet as per JSS:1375:03:2011 (Rev 3)

Rs.3779/-


Red Lead Delay Composition Cu-1, (as per IND/ME/950 (a) (Prov) 2008

Rs.3515/- Ammunition Protective Composition/ Nitrocellulose parts above 100

Rs.1613/-

Volatile Matter Rs.927/-

Zirconium % (by Difference) Rs. 5744/- 5 Dessicator,

Glassware, Oven & vacuum pump for

Volatile Matter % Smoke Composition R 636 as per IND/ME/1003 (Prov)

Rs.987/- Lead Dioxide % Rs. 2309/- Mg-Al Alloy % (By difference) % Rs. 2309/-

gravimetric analysis 6

Puncture Resistance Taster

Volatile Matter Paper Board Carton (Booster Composition 50:50 as per IND/ME/990 (Prov)

Rs. 834/-

Nitro Cellulose Rs.1418/-

Potasium Rs.1418/- Red Lead Rs.3439/- Barium Chromate Rs.1435/- Zirconium + Antimony Sulphide Rs.7710/-


Sodium Compound in Gun Powder by Flame Photometer

Gun Powder (as per JSS 1376:05:2005 Rev. No. 2)

Rs.3067/-


Volatile Matter % Testing of Explosive Delay Composition S1 as per IND/ME/795 (a)

Rs.889/-

Barium Chromate % Rs.1417/-

Antimony Sulphide ( by difference) % Rs.3009/- Potassium Perchlorate % Rs.1592/-

Ordnance Factory Khamaria, Jabalpur Nodal Officer: Shri P.C. Patil (Assistant Works Manager) Ordnance Factory Khamaria PIN- 482005 Madhya Pradesh Phone No: 0761 - 2742474 FAX: 0761 – 2337301

Sl.No


1 Fisher Sub-Sieve Sizer/ Partials Size Analyzer

Particles Size of various chemicals in powder Form (as per IS:7602-1975)

Chemicals in powder Form

Rs.4700/-

2 Shore A & D Hardness Tester

Rubber & Plastic Testing (as Per IND/ME/844)

Rubber/Plastic Materials Rs.2400/-

3 Chemical Analyser Chemical Analysis Various explosives & Pyrotechnics

Rs.4700/-

Documents

Annexure A 12-03-2018 · &korulghv dv µ1d&o¶ dv shu ,1' 0( 7dof 3rzghu 5v +ljk ([sorvlyhv )dfwru\ 3xqh 1rgdo 2iilfhu 6kul 0 5dmnxpdu -w *0 +ljk ([sorvlyh )dfwru\ .kdgnl 3xqh 3,1