ANTENNAS RYMSA 2014

8/11/2019 ANTENNAS RYMSA 2014

1/132


2/132


3/132

Since 1974, RYMSA RF has specialized in the

implementaon of complex broadcast radio and TV

antenna systems providing turnkey services for customerson all ve connents. Our experse in this eld has been

strongly developed over the years leading us to todays

market leadership posion, with capabilies to manage

each project from conceptual design to on-site installaon

and commissioning.

RYMSA RF has deployed broadcast antenna systems

from the Equator to the Arcc Circle, providing reliable

service in extreme environmental condions such as

high elevaons, strong winds, heavy icing, intense solarradiaon and high levels of humidity and salinity.

Customized radiang soluons of high complexity are

one of our speciales. Mul-panel or skew panel arrays for

large cross-secon towers, embedded antenna systems and

mul-paern arrays have all been engineered by RYMSA RF

to sasfy the most dicult antenna paern requirements.

Mul-channel service and high-power capability are

common requirements of todays modern broadcaster and

RYMSA RF antenna systems have the strongest market

reputaon in terms of reliability when these needs arise.

BROADCAST ANTENNA SYSTEM SOLUTIONS

1


4/132

FILTERS AND CHANNEL COMBINERS FOR RADIO AND TV

RYMSA RF has a successful history of supplying

mul-channel combiners to radio and TV broadcasters

worldwide. Every possible channel-combining requirementcan be achieved with RYMSA RFproducts, ranging from low

power applicaons to very high power systems including

large numbers of channels and very close channel spacing.

Depending on the needs of each site, RYMSA RF

can supply dierent types of combiners such as constant

impedance, manifold, star-point or commutang line

(stretch-line). As per customer request, patch panel

systems can be integrated in our channel combiners.

Our experse includes the ability to provide emissions

mask lters for digital TV signals of any standard and any

power level. We oer a complete line of re-tunable channel

combiners and mask lters that can be tuned to any channel,

even for adjacent channel condions.

In addion to lters and combiners, we supply great

stand-alone components including power combiners and

dividers, hybrids, switches and direconal couplers.

2


5/132

RF DESIGN & ENGINEERING

All key parameters of broadcast RF systems, such as radiaon paerns, coverage

calculaons and RMS and peak power handling are maer of close scruny by RYMSA

RFengineers. Cung-edge computer-aided design tools enable us to provide opmum

results for a wide variety of technical requirements.

In addion to our in-house proprietary soware, we have the best commercial

design tools available to guarantee the best performance, including SUPERNEC, CST,

FEKO and ICS Telecom. These powerful tools, together with the experience and experse

necessary to use them accurately, guarantee the best possible performance of our products

and the best value for the broadcaster.

RYMSA RF is connuously invesng in the maintenance and

upgrade of in-house test equipment at our manufacturing facilies

located in Spain and USA in order to ensure a high level of accuracy in thevericaon of our designs. All RF components and assemblies designed

by RYMSA RF are put through stringent electrical, mechanical and

environmental tesng in our state-of-the-art facilies that include:

Several far-eld antenna ranges and two indoor compact

antenna ranges, working from 6 MHz to 40 GHz.

Network analyzers with a full range of calibraon kits for all

relevant transmission lines types and sizes.

RMS and peak power test sets.

Vibraon tables. Vacuum chambers.

Salt spray corrosion chambers.

Temperature chambers.

The use of these state-of-the-art facilies, in strict accordance with

our quality management system endorsed by the DIN EN ISO 9001

Cercaon, guarantees the highest possible quality of all our products.

TEST FACILITIES

3


6/132

4


7/132

RYMSA RF will reserve the right to make any changes without notice.

Ctra. Campo Real km. 2,100

28500 Arganda del Rey (Madrid Spain)

Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]

Web: www.rymsarf.com

Facilities

Clients

Sales office

RYMSA RF belongs to TRYO Technologies, a spanish technology group of

consolidated companies focused on providing completed solutions to our clients in a

wide range of the professional telecommunications and radio frequency applications

for broadcast, space, critical communications, scientific and defence.

5


8/132

6


9/132

TABLEOFCONTENTS

TVANTENNASYSTEMS.....................................................................................................................9VHFBandITVAntennas..................................................................................................................11VHFBandIIITVAntennas................................................................................................................15

UHFBand

IV

V

TV

Antennas

............................................................................................................

26

RADIOANTENNASYSTEMS.............................................................................................................33BandIIRadioAntennas....................................................................................................................35LinearPolarization......................................................................................................................35CircularPolarization....................................................................................................................43

DABVHFBandIIIAntennas.............................................................................................................52

ANTENNASYSTEMSSPLITTINGNETWORK....................................................................................55

PowerSplittersallbandsI,II,III,IV/V............................................................................................55

Interconnectionlines.......................................................................................................................56

DTVMASKFILTERS&COMBINERS.................................................................................................57MaskFilters......................................................................................................................................59

MaskCombiners..............................................................................................................................69

Liquidcoolingsystem.......................................................................................................................80

TVNONMASKCOMBINERS............................................................................................................81VHFBandITVconstantimpedanceChannelCombiners................................................................83VHFBandIIITVChannelCombiners................................................................................................86Constantimpedance...................................................................................................................86

Starpoint

....................................................................................................................................

89

UHFBandIV/VChannelCombiner..................................................................................................90Constantimpedance...................................................................................................................90Starpoint....................................................................................................................................95

Stretchline..................................................................................................................................96

RADIOCOMBINERS.........................................................................................................................97

BIIConstantImpedance..................................................................................................................98

BIIStarpoint.................................................................................................................................104

RFPASSIVE

COMPONENTS

AND

ACCESSORIES

............................................................................

105

15/8".............................................................................................................................................10631/8".............................................................................................................................................10841/2".............................................................................................................................................11061/8".............................................................................................................................................11293/16"...........................................................................................................................................114Connectorsforcoaxialcables........................................................................................................116GasBarriers....................................................................................................................................117Finematchers................................................................................................................................118Flanged90elbows........................................................................................................................119Adapters.........................................................................................................................................120Measurementdirectionalcouplers...............................................................................................1223dBhybrids...................................................................................................................................123

Coaxialpatch

panels

......................................................................................................................

124

Patchpanel/dividers....................................................................................................................125Motorizedcoaxialswitches...........................................................................................................127Coaxialswitch/dividers................................................................................................................128

TV

ANTENNA

S

YSTEMS

RADIO

ANTENNA

SYSTEMS

ANTENNA

SYST.SPLITTING

NETWORK

DTVUHF

MASKFILTERS

&COMBINERS

TVNONMASK

COMBINERS

RADIO

COMBINERS

RFPASSIVECOMPONENTS&ACCESORIES

TV

ANTENNA

S

YSTEMS

7


10/132

8


11/132


Ctra. Campo Real km. 2,10028500 Arganda del Rey (Madrid Spain)

Phone: +34 91 876 06 99

Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com

TV Antenna systems

RYMSA RF manufactures a broad range of antennas for the transmission of TV signals in the VHF and UHFbands.

Antenna systems are currently formed by stacking single radiating elements properly disposed and fed with theadequate phase and amplitude. These unitary radiators can be either directional, as those based on panel or cavitysolutions, or dipole-style providing omni or quasi-omnidirectional performances.

RYMSA RF designs the single antenna elements succeeding in the challenge of displaying the necessaryruggedness minimizing wind load and weight, and ready to remain weatherproof for a long life withstanding anysort of extreme climatic conditions. This versatility allows using them also individually for simple needs such as relaysites.

Power dividers and interconnecting lines (both flexible and rigid), are utilized to build the distributionnetwork which transports the signals from the main transmission line up to each radiating element. The veryassorted range of different models of these products manufactured by RYMSA RF ensures the capability of satisfying

any possible request, from simple arrays to complex high power antenna systems.

The antenna systems can be conceived either to be installed on the site mast element by element, andtherefore supplied partially disassembled, or fully assembled in plant and delivered as a unitized integrated product.Examples of the latter are the UHF panel spines and the superturnstile antennas.

VHF TV Antennas

RYMSA RF AT11 series for B-I and AT13 series for B-III constitute

a comprehensive range of antennas for these frequencies.

Panel systems: the arrays of panels are the most versatile solution to

implement radiation patterns customized to any particular coveragerequirement. Ideal for middle to big masts and multichannel operation,

they also allow reaching the high power ratings frequently required in

those situations. RYMSA VHF TV panel systems can be classified as

follows:

Band I: Horizontally polarized panels of two dipoles, with

models for 4-around (square) and 3-around (triangular)

arrays, working either at a single channel or across extended

bandwidths.

Band III: Horizontally and vertically polarized panels of two

and four dipoles, working for the whole band, allowing to buildsquare and triangular arrays. Robust design for hard

environments and lighter versions for simpler systems are

available.

Other antenna solutions marketed by RYMSA RF for VHF TV

applications are:

Versatile antenna systems: a unique solution in vertical

polarization based on a simple kit of active and passive dipoles

allowing to customize on site the type of HRP. Available for

both B-I and B-III.

TV VHF B-I and B-III antennas basedon panel arrays

TV

ANTENNA

S

YSTEMS

9


12/132



Phone: +34 91 876 06 99


TV Antenna systems

UHF TV Antennas

RYMSA RF AT15 series are compiling several types of antennas for TVapplications within the B-IV/V range.

Panel systems: with equivalent characteristics as those previously

described for VHF, panel arrays are the best choice for situations

involving multichannel needs and tailored patterns. UHF panel

systems are frequently delivered as a fully integrated antenna, with all

the elements pre-assembled on a spine that also may be fully

enclosed in a GRP cylinder. Several models are available:

Horizontal polarization panels: suitable for the

implementation of square, pentagonal and multi-panel

arrangements, and with several input connector options to

achieve any possible power request.

Vertical polarization panel: designed for broadband operation,

it is available with several input connector options.

Elliptical polarization panels: especially conceived for

assembling antenna systems meeting the new challenges of

the market on non-linear polarization, the antenna can be

supplied either with a power splitting hybrid neatly integrated

on its frame, or with two connectors, one per polarization

component.

Superturnstile antennas: there are several versions, all ready for

multichannel applications, and ranging from low to high power

handling.

TV UHF B-IV/V multipanel antennasystems

TV UHF high power superturnstileantenna under factory tests

TV

ANTENNA

S

YSTEMS

10


13/132



Phone: +34 91 876 06 99


Band I versatile antenna system

Top-mount vertical polarization

Model: AT11-111

This type of antenna system allows selection of the horizontal radiation pattern in the field that best fulfils agiven application using either all or only part of the elements provided in a kit. Upon the number of elementsused and the configuration installed, either directional, peanut or quasi-omnidirectional horizontal radiation

patterns can be obtained.

The antenna system allows the implementation of a complete secondary low power network in a very short time.The system is top mounted by means of a supporting pipe included in the kit.

Two active and two parasitic dipoles, together with the splitter and dipole-feeding cables complete the kit.

Frequency range 54 - 88 MHz (One model per FCC channel)

Peak gainDirectional Peanut

Quasi-

omnidirectional

7.5 dB(ref. /2 dipole)



Polarization Vertical

Impedance 50 Ohm

VSWR Visual:1.22:1 Aural:1.50

Maximum power handling peak sync 500 W

Maximum power handling RMS 350 W

Connector type DIN 7/16

Pressurization Non pressurized

NOTE: Mechanical data supplied for the larger system, which corresponds to channel 2 FCC

Materials Hot dip galvanized steel

Configuration Directional PeanutQuasi-

omnidirectional

Aperture of radiating elements 5940 mm 2340 mm 5940 mm

Wind load @160 Km/h (including pipe) 1814 N 1322 N 1322 N

Weight 170 kg 136 kg 141 kg

Maximum wind speed 120 km/h

Mounting Top mounted on pipe

Grounding DC grounded

Temperature range -40C to +80C

Humidity 100%

PEANUT

Electrical Specifications

Mechanical & Environmental Specifications

QUASI-ONMIDIRECTIONAL

H-planeHorizontal Pattern



TV

ANTENNA

S

YSTEMS

11


14/132



Phone: +34 91 876 06 99


Band I 2 dipoles panel

Especially suitable for square masts

Model: AT11-220

Frequency range 54 88 MHz

Channels

2 4 FCC 3 5 FCC 4 6 FCC

Individual FCC channels available onrequest

Peak gain 7.5 dB (ref. /2 dipole)

3 dB beam width E-plane: 72 H-plane: 62

Polarization Horizontal

Impedance 50 Ohm

VSWR 1.2:1Maximum power handling peak sync(per connector)

2 x 3 kW 2 x 6 kW

Connector type (2 per antenna) 2 x DIN 7/16 2 x EIA 7/8

Pressurization Non pressurizedGas barrier oninput connector

Channels 2 4 FCC 3 5 FCC 4 6 FCC

MaterialsReflector & dipolesFeed points radome

Hot dip galvanized steelFiberglass

Dimensions (W x D x H)

2730 x1213 x

3630 mm

2730 x1087 x

3380 mm

2220 x1000 x

3000 mm


Wind load @ 160 Km/h (front) 1800 N 1747 N 1600 N

Wind load @ 160 Km/h (lateral) 925 N 905 N 790 NWeight 102 97 85

Typical mounting Square arrangement tower

Vertical spacing between dipoles 2550 mm 2310 mm 2005 mm



Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load

(@160km/h)

System

height(mm)

1

2 5.5 204 2.7 kN

36303 3.7 306 3.7 kN

4 2.5 408 4.6 kN

2

2 8.5 408 5.5 kN

87303 6.7 612 7.3 kN

4 5.5 816 9.1 kN

4

2 11.5 816 10.9 kN

189303 9.8 1224 14.6 kN

4 8.5 1632 18.2 kN

6

2 13.3 1224 16.4 kN

291303 11.5 1836 21.9 kN

4 10.3 2448 27.3 kN

8

2 14.5 1632 21.8 kN

393303 12.8 2448 29.2 kN

4 11.5 3264 36.4 kN



NOTES:

- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.

- Wind load & weight figures withoutconsidering cables, splitters & hardware

Antenna System Characteristics (Channel 2-4 Model)

E-planeHorizontalPattern

H-planeVerticalPattern

TV

ANTENNA

S

YSTEMS

12


15/132



Phone: +34 91 876 06 99


Band I 2 dipoles panelEspecially suitable for triangular mastsModel: AT11-223

Frequency range 54 88 MHz

Channels

2 4 FCC 3 5 FCC 4 6 FCC

Individual FCC channels available onrequest




Impedance 50 Ohm

VSWR 1.2:1

Maximum power handling peak sync(per connector)

2 x 3 kW 2 x 6 kW

Connector type (2 per antenna) 2 x DIN 7/16 2 x EIA 7/8


Channels 2 4 FCC 3 5 FCC 4 6 FCC



Dimensions (W x D x H)2730 x 1425x 3630 mm

2730 x 1313x 3380 mm

2220 x 1208x 3000 mm

Maximum wind speed 200 Km/h

Wind load @ 160 Km/h (front) 1793 N 1740 N 1593 N

Wind load @ 160 Km/h (lateral) 922 N 902 N 792 N

Weight 98 94 84

Typical mounting Triangular arrangement tower

Vertical spacing between dipoles 2550 mm 2310 mm 2005 mm



Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(Kg)

Wind load

(@160

Km/h)

System

height (mm)

12 4.0 196 3.5 kN

36303 2.2 294 5.2 kN

22 7.0 392 7.0 kN

87303 5.2 588 10.4 kN

42 10.0 784 13.9 kN

189303 8.3 1176 20.7 kN

62 11.8 1176 20.9 kN

291303 10.0 1764 31.1 kN

82 13.0 1568 27.9 kN

393303 11.3 2352 41.4 kN



NOTES:

- Table supplies data up to 8 bays only for

simplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures without

considering cables, splitters & hardware.

Antenna System Characteristics (Channel 2-4 Model)

TV

ANTENNA

S

YSTEMS




13


16/132



Phone: +34 91 876 06 99Fax: +34 91 876 07 09E-mail: [email protected]: www.rymsarf.com

Band I circular polarization2 crossed dipoles panelEspecially suitable for triangular mastsModel: AT11-303

Frequency range54 88 MHz

(One model per FCC channel)



Polarization Circular

Impedance 50 Ohm

VSWR 1.1:1 (with circular polarization)

Maximum power handling peak sync.(per connector)

6 kW(3 kW)

10 kW(6 kW)

22 kW(11 kW)

Connector type (2 per antenna)2 x

DIN 7/162 x

EIA 7/82 x

DIN 13/30

PressurizationNon

pressurizedGas barrier on input

connector

Fully pressurized as an option

Materials Hot dip galvanized steel

Dimensions (W x D x H) 2590 x 1351 x 2590 mm


Wind load (front) 1600 N (@160 Km/h)

Wind load (lateral) 610 N (@160 Km/h)

Weight 110 kg

Typical mounting Triangular arrangement towerClamp type To 80 115 mm pipe

Vertical spacing 4200 mm typical



Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(kg)

Wind load(@160

Km/h)

Systemheight

(mm)

12 1.8 220 2.9 kN

2590

3 0.1 330 4.3 kN2

2 4.8 440 5.9 kN6790

3 3.1 660 8.5 kN

42 7.8 880 11.7 kN

151903 6.1 1320 17.1 kN

62 9.6 1320 17.6 kN

235903 7.8 1980 25.5 kN

82 10.8 1760 23.4 kN

319903 9.1 2640 34.1 kN


Mechanical & Environmental Specifications (Channel 4)

Antenna System Characteristics

NOTES:

- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.

TV

ANTENNA

S

YSTEMS

14


17/132



Phone: +34 91 876 06 99


Band III versatile antenna system

Top-mount vertical polarization

Model: AT13-111

This type of antenna system allows selection of the horizontal radiation pattern in the field that best fulfils a given

application using either all or only part of the elements provided in a kit. Upon the number of elements used andthe configuration installed, either directional, peanut or quasi-omnidirectional horizontal radiation patterns can beobtained.

The antenna system allows the implementation of a complete secondary low power network in a very short time.The system is top mounted by means of a supporting pipe included in the kit.

Two active and two parasitic dipoles, together with the splitter and dipole-feeding cables complete the kit.

Frequency range 174-216 MHz

Peak gain

Directional PeanutQuasi-

omnidirectional





Impedance 50 Ohm

VSWR 1.3:1

Maximum power handling peak sync 500 W

Maximum power handling RMS 350 W



Materials Hot dip galvanized steelConfiguration Directional Peanut

Quasi-omnidirectional

Aperture of radiating elements 2230 mm 750 mm 2230 mm

Wind load @160 Km/h (including pipe) 1760 N 770 N 770 N

Weight 127 kg 118 kg 118 kg


Mounting Top mounted on pipe



Humidity 100%



QUASI-ONMIDIRECTIONAL




PEANUT

TV

ANTENNA

S

YSTEMS

15


18/132




Band III 2 dipoles panelEspecially suitable for square mastsModel: AT13-220





Impedance 50 Ohm

VSWR 1.15:1

Maximum power handling peak sync 2 kW 3.5 kW 6 kW

Maximum power handling RMS 1.4 kW 2.5 kW 4.2 kW

Connector type DIN 7/16 EIA 7/8 DIN 13/30

PressurizationNon


connector





Wind load (front) 793 N (@160 km/h)


Weight 38 Kg


Clamp type To 80 115 mm pipe

Vertical spacing 1600 mm



Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(Kg)

Wind load(@160Km/h)

Systemheight(mm)

1

2 5.5 76 1.2 kN

13003 3.7 114 1.6 kN

4 2.5 152 2.0 kN

2

2 8.5 152 2.4 kN

29003 6.7 228 3.2 kN

4 5.5 304 3.9 kN

4

2 11.5 304 4.7 kN

61003 9.7 456 6.3 kN

4 8.5 608 7.9 kN

6

2 13.3 456 7.1 kN

93003 11.5 684 9.5 kN

4 10.3 912 11.8 kN

8

2 14.5 608 9.5 kN

125003 12.7 912 12.6 kN

4 11.5 1216 15.8 kN



NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without

considering cables, splitters & hardware




TV

ANTENNA

S

YSTEMS

16


19/132




Band III 2 dipoles panelEspecially suitable for square mastsLight constructionModel: AT13-222





Impedance 50 Ohm

VSWR 1.15:1

Maximum power handling peak sync 2 kW

Maximum power handling RMS 1.4 kW



MaterialsReflector & dipoles

Isolators

Hot dip galvanized steel(aluminium construction as option)

PTFE




Wind load (lateral) 240 N (@160 km/h)

Weight 15 kg


Clamp type To 50 70 mm pipeVertical spacing 1600 mm



Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(kg)

Wind load(@160km/h)

Systemheight(mm)

1

2 5.5 30 0.7 kN

12003 3.7 45 0.9 kN

4 2.5 60 1.2 kN

2

2 8.5 60 1.4 kN

28003 6.7 90 1.9 kN

4 5.5 120 2.3 kN

4

2 11.5 120 2.8 kN

60003 9.7 180 3.7 kN

4 8.5 240 4.7 kN

6

2 13.3 180 4.2 kN

92003 11.5 270 5.6 kN

4 10.3 360 7.0 kN

8

2 14.5 240 5.6 kN

124003 12.7 360 7.5 kN

4 11.5 480 9.3 kN



NOTES:

- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without



TV

ANTENNA

S

YSTEMS



17


20/132




Band III 2 dipoles panelEspecially suitable for square mastsFor extreme weather conditions (radome protected)Model: AT13-222R





Impedance 50 Ohm

VSWR 1.15:1





MaterialsRadomeReflector & dipolesIsolators

FiberglassAluminium

PTFE





Weight 32 Kg





Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(Kg)

Wind load

(@160Km/h)

System

height(mm)

1

2 5.5 64 2.5 kN

12103 3.7 96 3.4 kN

4 2.5 128 3.9 kN

2

2 8.5 128 5.0 kN

28103 6.7 192 6.8 kN

4 5.5 256 7.8 kN

4

2 11.5 256 10.0 kN

60103 9.7 384 13.6 kN

4 8.5 512 15.6 kN

6

2 13.3 384 15.0 kN

92103 11.5 576 20.4 kN

4 10.3 768 23.4 kN

8

2 14.5 512 20.0 kN

124103 12.7 768 27.2 kN

4 11.5 1024 31.2 kN



NOTES:

- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without

considering cables, splitters & hardware




TV

ANTENNA

S

YSTEMS

18


21/132









Impedance 50 Ohm

VSWR 1.1:1




PressurizationNon


connector







Weight 68 Kg





Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(Kg)

Wind load(@160Km/h)

Systemheight(mm)

1

2 8.5 136 2.5 kN

29003 6.7 204 3.5 kN

4 5.5 272 4.3 kN

2

2 11.5 272 5.1 kN

61003 9.7 408 7.0 kN

4 8.5 544 8.5 kN

4

2 14.5 544 10.1 kN

125003 12.7 816 13.9 kN

4 11.5 1088 17.1 kN

6

2 16.3 816 15.2 kN

189003 14.5 1224 20.9 kN

4 13.3 1632 25.6 kN

8

2 17.5 1088 20.2 kN

253003 15.7 1632 27.8 kN

4 14.5 2176 34.2 kN



NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.




TV

ANTENNA

S

YSTEMS

19


22/132









Impedance 50 Ohm

VSWR 1.15:1






Isolators

Hot dip galvanized steel(aluminium construction as option)

PTFE





Weight 33 Kg






Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load(@160Km/h)

Systemheight(mm)

1

2 8.5 66 1.4 kN

27003 6.7 99 1.9 kN

4 5.5 132 2.4 kN

2

2 11.5 132 2.8 kN

59003 9.7 198 3.9 kN

4 8.5 264 4.8 kN

4

2 14.5 264 5.7 kN

123003 12.7 396 7.7 kN

4 11.5 528 9.5 kN

6

2 16.3 396 8.5 kN

187003 14.5 594 11.6 kN

4 13.3 792 14.3 kN

8

2 17.5 528 11.4 kN

251003 15.7 792 15.4 kN

4 14.5 1056 19.1 kN




NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures without




TV

ANTENNA

S

YSTEMS

20


23/132




Band III 2 dipoles panelEspecially suitable for triangular mastsModel: AT13-223


Peak gain 7 dB (ref. /2 dipole)



Impedance 50 Ohm

VSWR 1.15:1




PressurizationNon

pressurized

Gas barrier on inputconnector







Weight 36 kg






Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(kg)

Wind load(@160

Km/h)

Systemheight

(mm)

12 4.0 72 1.5 kN

13003 2.2 108 2.2 kN

2 2 7.0 144 3.0 kN 29003 5.2 216 4.3 kN

42 10.0 288 6.0 kN

61003 8.3 432 8.7 kN

62 11.8 432 9.1 kN

93003 10.0 648 13.0 kN

82 13.0 576 12.1 kN

125003 11.3 864 17.4 kN



NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.




TV

ANTENNA

S

YSTEMS

21


24/132




Band III 4 dipoles panelEspecially suitable for triangular mastsModel: AT13-243


Peak gain 10 dB (ref. /2 dipole)



Impedance 50 Ohm

VSWR 1.1:1




PressurizationNon


connector







Weight 65 kg






Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(kg)

Wind load(@160

km/h)

Systemheight

(mm)

12 7.0 130 3.2 kN

29003 5.2 195 4.6 kN

2 2 10.0 260 6.3 kN 61003 8.2 390 9.2 kN

42 13.0 520 12.6 kN

125003 11.3 780 18.5 kN

62 14.8 780 18.9 kN

189003 13.0 1170 27.7 kN

82 16.0 1040 25.2 kN

253003 14.3 1560 37.0 kN



NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware




TV

ANTENNA

S

YSTEMS

22


25/132









Impedance 50 Ohm

VSWR 1.15:1




PressurizationNon


connector







Weight 38 kg






Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(Kg)

Wind load(@160Km/h)

Systemheight(mm)

1

2 4.5 76 1.2 kN

12503 2.7 114 1.6 kN

4 1.5 152 2.0 kN

2

2 7.5 152 2.4 kN

28503 5.7 228 3.2 kN

4 4.5 304 3.9 kN

4

2 10.5 304 4.7 kN

60503 8.7 456 6.3 kN

4 7.5 608 7.9 kN

6

2 12.3 456 7.1 kN

92503 10.5 684 9.5 kN

4 9.3 912 11.8 kN

8

2 13.5 608 9.5 kN

124503 11.7 912 12.6 kN

4 10.5 1216 15.8 kN



NOTES:

- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.


H-planeHorizontalPattern

E-planeVerticalPattern

TV

ANTENNA

S

YSTEMS

23


26/132









Impedance 50 Ohm

VSWR 1.15:1






Feed points radome

Hot dip galvanized steel(Aluminium construction as option)

PTFE





Weight 15 kg






Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load

(@160km/h)

System

height(mm)

1

2 4.5 30 0.7 kN

12003 2.7 45 0.9 kN

4 1.5 60 1.2 kN

2

2 7.5 60 1.4 kN

28003 5.7 90 1.9 kN

4 4.5 120 2.3 kN

4

2 10.5 120 2.8 kN

60003 8.7 180 3.7 kN

4 7.5 240 4.7 kN

6

2 12.3 180 4.2 kN

92003 10.5 270 5.6 kN

4 9.3 360 7.0 kN

8

2 13.5 240 5.6 kN

124003 11.7 360 7.5 kN4 10.5 480 9.3 kN



NOTES:


- Wind load & weight figures withoutconsidering cables, splitters & hardware.




TV

ANTENNA

S

YSTEMS

24


27/132




Band III 2 dipoles panelEspecially suitable for square mastsFor extreme weather conditions (radome protected)Model: AT13-227R





Impedance 50 Ohm

VSWR 1.15:1





MaterialsRadomeReflector & dipolesIsolators

FiberglassAluminium

PTFE





Weight 32 Kg






Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(Kg)

Wind load

(@160Km/h)

System

height(mm)

1

2 4.5 64 2.5 kN

12103 2.7 96 3.4 kN

4 1.5 128 3.9 kN

2

2 7.5 128 5.0 kN

28103 5.7 192 6.8 kN

4 4.5 256 7.8 kN

4

2 10.5 256 10.0 kN

60103 8.7 384 13.6 kN

4 7.5 512 15.6 kN

6

2 12.3 384 15.0 kN

92103 10.5 576 20.4 kN

4 9.3 768 23.4 kN

8

2 13.5 512 20.0 kN

124103 11.7 768 27.2 kN4 10.5 1024 31.2 kN



NOTES:

- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware


TV

ANTENNA

S

YSTEMS



25


28/132



Phone: +34 91 876 06 99


Band IV/V horizontal polarization panelEspecially suitable for square mastsModel: AT15-250





Impedance 50 Ohm

VSWR 1.1:1 typical ( 1.13:1 max)

Maximum power handling peak sync 1.4 kW 3.5 kW 4.2 kW 6.5 kW

Maximum power handling RMS 1 kW 2.5 kW 3 kW 4.5 kW

Connector type DIN 7/16 EIA 7/8DIN

13/30EIA

1 5/8

PressurizationNon

pressurized

Gas barrier on input connector

Materials

Reflector & radiating elements

RadomeRadome colour

Aluminium(Stainless steel available on request)

FiberglassRed or white on request





Weight 10 Kg (model with DIN 7/16 connector)

Typical mounting Several combinations depending on theradiation pattern required (square typical)




Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load(@160

km/h)

Systemheight

(mm)

1

2 8.4 20 1.1 kN

10003 6.6 30 1.6 kN

4 5.3 40 1.5 kN

2

2 11.4 40 2.2 kN

20003 9.6 60 3.2 kN

4 8.3 80 3.1 kN

4

2 14.4 80 4.4 kN

40003 12.6 120 6.4 kN

4 11.4 160 6.2 kN

6

2 16.1 120 6.6 kN

60003 14.4 180 9.6 kN

4 13.1 240 9.3 kN

8

2 17.4 160 8.8 kN

80003 15.6 240 12.8 kN

4 14.4 320 12.4 kN



NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems with more

bays are available.- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.




TV

ANTENNA

S

YSTEMS

26


29/132



Phone: +34 91 876 06 99


Band IV/V vertical polarization panelEspecially suitable for square mastsModel: AT15-251





Impedance 50 Ohm

VSWR 1.15:1

Maximum power handling peak sync 1.4 KW 3.5 KW 4.2 KW 6.5 KW

Maximum power handling RMS 1 KW 2.5 KW 3 KW 4.5 KW


13/30EIA

1 5/8

PressurizationNon

pressurized

Gas barrier on input connector

MaterialsReflector & radiating elementsRadomeRadome colour

AluminiumFiberglass

Red or white on request



Wind load (front) 743 N (@160 Km/h)


Weight 9 Kg (model with DIN 7/16 connector)

Typical mounting

Several combinations depending on the

radiation pattern required (square typical)Vertical spacing 1000 mm



Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(Kg)

Wind load(@160

Km/h)

Systemheight

(mm)

1

2 8.1 18 1.1 kN

10003 6.3 27 1.6 kN

4 5.0 36 1.5 kN

2

2 11.1 36 2.2 kN

20003 9.3 54 3.2 kN

4 8.0 72 3.1 kN

4

2 14.1 96 4.4 kN

40003 12.3 108 6.4 kN

4 11.1 144 6.2 kN

6

2 15.8 108 6.6 KN

60003 14.1 162 9.6 kN

4 12.8 216 9.3 kN

8

2 17.1 144 8.8 kN

80003 15.3 216 12.8 kN

4 14.1 288 12.4 kN



NOTES:


- Wind load & weight figures withoutconsidering cables, splitters & hardware




TV

ANTENNA

S

YSTEMS

27


30/132



Phone: +34 91 876 06 99


Band IV/V slant polarization panelEspecially suitable for square mastsModel: AT15-252




Polarization Slant (typical 80%H / 20%V)

Impedance 50 Ohm

VSWR 1.1:1 typical ( 1.13:1 max)

Maximum power handling peak sync 1.4 kW 3.5 kW 4.2 kW 6.5 kW

Maximum power handling RMS 1 kW 2.5 kW 3 kW 4.5 kW


13/30EIA

1 5/8

Pressurization

Non

pressurized

Gas barrier on input

connector

The above specifications correspond to the typical 80%H / 20%V polarization ratio

Materials

Reflector & radiatingelementsRadomeRadome colour

Aluminium(Stainless steel available on request)

FiberglassRed or white on request





Weight 10 kg (model with DIN 7/16 connector)





Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load(@160km/h)

Systemheight(mm)

1

2 9.8 20 1.0 kN

10943 8.1 30 1.2 kN

4 6.8 40 1.4 kN

2

2 12.8 40 1.9 kN

21943 11.1 60 2.3 kN

4 9.8 80 2.8 kN

4

2 15.8 80 3.8 kN

43943 14.1 120 4.7 kN

4 12.8 160 5.7 kN

6

2 17.6 120 5.8 kN

65943 15.8 180 7.0 kN

4 14.6 240 8.5 kN

8

2 18.9 160 7.7 kN

87943 17.1 240 9.4 kN

4 15.8 320 11.4 kN



NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.- Null fill, beam tilt, harness & feeder

losses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.




TV

ANTENNA

S

YSTEMS

28


31/132



Phone: +34 91 876 06 99


Band IV/V circular/elliptical polarization panelEspecially suitable for square mastsModel: AT15-245


Gain (Total field) 11.1 dB (ref. /2 dipole)

Gain (linear component for circular polariz.) 8.1 dBd (H. Pol.) 8.1 dBd (V. Pol.)

3 dB beam width Horizontal: 61 Vertical: 27

PolarizationCircular or Elliptical (supplied by an

integrated hybrid coupler)

Polarization ratio options50%H /50%V; 60%H /40%V;70%H /30%V; 80%H /20%V

Impedance 50 Ohm

VSWR 1.13:1

Maximum power handling RMS 1 kW 2.5 kW

Connector type DIN 7/16 EIA 7/8

Pressurization Non presurizedGas barrier on input

connector

MaterialsReflector & radiating elementsRadomeRadome colour

AluminiumFiberglass

Red or white on request





Weight 13 kg including hybrid

Typical mounting

Several combinations depending on the

radiation pattern required (square typical)Vertical spacing 1000 mm



Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(kg)

Wind load(@160km/h)

Systemheight(mm)

1

2 8.1 26 1.1 kN

10003 6.4 39 1.6 kN

4 5.2 52 1.5 kN

22 11.1 52 2.2 kN

20003 9.4 78 3.2 kN

4 8.2 104 3.1 kN

4

2 14.4 104 4.4 kN

40003 12.4 156 6.4 kN

4 11.2 208 6.2 kN

6

2 15.9 156 6.6 kN

60003 14.1 234 9.6 kN

4 13.0 312 9.3 kN

8

2 17.2 208 8.8 kN

80003 15.4 312 12.8 kN

4 14.2 416 12.4 kN

The panel can be supplied without the input hybrid thus displaying two connectors (DIN7/16 or EIA 7/8"), one feeding an HPOL array and one feeding a VPOL array.




NOTES:

- Table supplies data up to 8 bays only forsimplification purposes; systems with morebays are available.

- Null fill, beam tilt, harness & feeder losses

NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.

HorizontalPattern

VerticalPattern

TV

ANTENNA

S

YSTEMS

Optional

29


32/132




Band IV/V low power superturnstile antennas

Model: AT15-801 / 802

UHF Superturnstile Antennas for TV applications offer a broadband omnidirectional radiation pattern withexcellent circularity, combined with a minimum wind load impact on the supporting mast.

These antenna systems are ideal for top-mounting, and they are supplied ready for installation, fullyassembled and enclosed in a GRP cylinder.

AT15-801 AT15-802

Frequency range 470-860 MHzVSWR 1.15:1

Impedance 50 Ohm


Peak gain (ref. /2 dipole)1 Bay 2 Bays

5 dBd 8 dBd

3 dB vertical beam width (mid-band) 25 11Maximum power handling RMS 2 kW 4 kW

Connector type (1) EIA 7/8" female EIA 1 5/8" female

Pressurization Not pressurized

Materials

Batwings Aluminium

Connectors Aluminium and brassIsolators PTFE

Radome FiberglassRadome dimensions ( X H) 318 x 1200 mm 318 x 2500 mm

Weight 26 Kg 46 Kg

Wind Load @ 160 Km/h 323 N 726 NMaximum wind speed 220 km/h


Temperature range -40C to +70CHumidity 100%



TV

ANTENNA

S

YSTEMS

NOTES:

(1) Other connector types underrequest.

Others gain values and power handlingcan be supplied. Please, ask RYMSA RF.

AT15-801 Superturnstile antenna.

30


33/132



Phone: +34 91 876 06 99


Band IV/V slot antennas

Suitable for top-mount or side-mount

Series: AT15-9XX

Slot antennas for UHF TV applications are a neat way to provide broadcasting solutions minimizing the

visual and mechanical impact over its supporting structure. These antennas are constructed fully enclosedin a cylindrical fiberglass radome, featuring very reduced weight and windload figures, while keepingoptimum radioelectrical performances under most severe environmental conditions.

They are ready for installation in top-mount and side-mount configurations, offering a very wide scope ofradiating characteristics depending on the polarization (horizontal, circular, elliptical), on the shape of thehorizontal radiation pattern, and on the vertical aperture.

AT15-9XX series cover all the possible needs from low power/ low gain solutions up to 16 KW RMS andhigh gain.


Multichannel versions available Yes

VSWR 1.1:1 across a single channel

Polarization Horizontal / Circular / Elliptical

Beam tilt & Null Fill Customized under request

Impedance 50 Ohm

Number of bays From 4 to 24 bays

Maximum power handling peak sync From 500 W to 25 KW

Maximum power handling RMS From 350 W to 16 KW

Connector type EIA 1 5/8 or EIA 3 1/8

Radome Fiberglass (included)

Height (for 4 bays and 24 bays) From 2400 mm to 13060 mm



Humidity 100%



TV

ANTENNA

S

YSTEMS

NOTES:

Note: Mechanical data supplied corresponds

to channel 30 FCC. Ask RYMSA RF forothers horizontal patterns

E-planeHorizontalPattern650 MHz



31


34/132

32


35/132



Phone: +34 91 876 06 99


Radio antenna systems

RYMSA RF manufactures a broad range of antennas for the transmission of radio signals in B-II (FM &IBOC) and B-III (DAB).

Antenna systems are currently formed by stacking single radiating elements properly disposed and fed withthe adequate phase and amplitude. These unitary radiators can be either directional, as those based on panel orcavity solutions, or dipole-style providing omni or quasi-omnidirectional performances.

RYMSA RF designs the single antenna elements succeeding in the challenge of displaying the necessaryruggedness minimizing wind load and weight, and ready to remain weatherproof for a long life withstanding anysort of extreme climatic conditions. This versatility allows using them also individually for simple needs such as relaysites.

Power dividers and interconnecting lines (both flexible and rigid), are utilized to build the distributionnetwork which transports the signals from the main transmission line up to each radiating element. The veryassorted range of different models of these products manufactured by RYMSA RF ensures the capability of satisfying

any possible request, from simple arrays to complex high power antenna systems.

RYMSA RF AT12 series offers an extensive range of radiating elements for applications in FM and IBOCradio. Digital radio needs in DAB B-III are covered by AT13 (included at TV Antenna Systems section of this catalog)and AT14 series.

hese arrays are the most versatile solution to implement radiation

patterns customized to any particular coverage requirement. Ideal for

middle to big masts and multichannel operation, they also allow reaching

the high power ratings frequently required in those situations. They can beclassified as follows:

FM and IBOC: horizontal, vertical and circular polarization panels are

provided with several input connector sizes to reach any requested

power handling. This assorted range is complemented by the back

cavity model for circular polarization. Elliptical polarization is easily

achievable as well. Linearly polarized unitary antennas have one input

connector, whilst the circularly polarized ones display two and four

connectors.

Triangular, square and multi-panel arrays can be easily implemented

with RYMSA RF AT12 series directional antennas.

DAB: AT13 series panels, included in this catalog at the TV Antenna

Systems section, are available for the transmission of digital radio in B-

III. A special panel model, with reduced bandwidth just for the DAB

range is also available.

FM circularly polarized antenna system builtas an array of back-cavity unitary radiators

FM panel antenna for triangular mastassembled in-plant for factory tests

Panel and Cavity Systems

RADIO

ANTENNA

SYSTEMS

33


36/132



Phone: +34 91 876 06 99


Radio antenna systems

These solutions are based on the vertical stacking of dipole-style

elementary antennas. These systems offer less radiation pattern versatility

than panels, but their reduced cost, weight and wind load makes them an

excellent alternative to them. As in previous cases, RYMSA RF models are

ranging from low to very high power applications. They can be classified as

follows:

FM and IBOC: vertically and circularly polarized antennas, available with

broadband features and also optimized to reduced bandwidths. Elliptical

polarization is also provided. To form the arrays, branch feed lines are

used, allowing the adjustment of the spacing between bays to customize

the vertical pattern and minimize downward radiation. Several models

are available for extreme weather conditions and in a lighter version as

well.

DAB: vertical polarization dipoles are available, with similar features than

their FM counterparts.FM circularly polarized omnidirectional

array

Omnidirectional and Quasi-omni arrays

RADIO

ANTENNA

SYSTEMS

34


37/132




Band II 2 dipoles panelEspecially suitable for triangular mastsModel: AT10-221

Frequency range 65.9-74 /87.5-108 MHz

Peak gain (ref. /2 dipole)65.9-74 MHz

5.17 dB87.5-108 MHz

4.97 dB

3 dB beam widthE-plane: 71

H-plane: 108E-plane: 73

H-plane: 106


Impedance 50 Ohm

VSWR67-71 MHz1.25:1

FM1.4:1

Maximum power handling 9 kW 7 kW



MaterialsStructureFeed points radome






Weight 126 kg






Humidity 100%

Numberof Bays

Number

ant.per bay

Peak gain

(dBd)66-74 MHz

Peak gain(dBd)

87,5-108MHz

Weight(kg)

Windload

(@160Km/h)

System

height(mm)

1 2 2,17 1,97 252 3,4 kN 25003 0,37 0,17 378 5,1 kN

22 5,17 4,97 504 6,9 kN

51003 3,37 3,17 756 10,2 kN

42 8,17 7,97 1008 13,7 kN

103003 6,37 6,17 1512 20,4 kN

62 9,97 9,77 1512 20,6 kN

155003 8,17 7,97 2268 30,6 kN

82 11,17 10,97 2016 27,5 kN

207003 9,37 9,17 3024 40,8 kN




RADIO

ANTENNA

SYSTEMS

35


38/132




Band II dipole antennaSide-mount vertical polarizationModel: AT12-522

Frequency range 87.5-108 MHz

Peak gain0 dB (ref. /2 dipole, free space)

1.75 dB (ref. /2 dipole, with pole)



Impedance 50 Ohm

VSWR 1.3:1

Maximum power handling 2 kW



MaterialsDipoleIsolators

Stainless steelPTFE



Wind load 165 N (@160 km/h)

Weight 10 kg


Vertical spacing 0.8 0.9typical



Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load(@160km/h)

Systemheight(mm)

1 1 1.8 10 0.17 kN 1340

2 1 4.8 20 0.34 kN 3949

4 1 7.8 40 0.68 kN 9166

6 1 9.5 60 1.02 kN 14383

8 1 10.8 80 1.36 kN 19601

10 1 11.8 100 1.70 kN 2482112 1 12.6 120 2.04 kN 30039



NOTES:

- Radiation patterns and gain values at thetable are including the effect of supportingpole- Null fill, beam tilt, harness & feeder lossesNOT INCLUDED



RADIO

ANTENNA

SYSTEMS



36


39/132




Band II dipole antennaSide-mount vertical polarizationFor extreme weather conditionsModel: AT12-512


Peak gain1.13 dB (ref. /2 dipole, free space)3.08 dB (ref. /2 dipole, with pole)



Impedance 50 Ohm

VSWR 1.2:1

Maximum power handling 2.5 kW 5 kW 7 kW


PressurizationNon


connector

MaterialsDipoleFeed points radome





Weight 30 kg


Vertical spacing 0.8 0.9typical



Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load(@160 km/h)

Systemheight(mm)

1 1 3.1 30 0.4 kN 1440

2 1 6.1 60 0.7 kN 4049

4 1 9.1 120 1.4 kN 9266

6 1 10.9 180 2.1 kN 144838 1 12.1 240 2.8 kN 19701

10 1 13.1 300 3.5 kN 24917

12 1 13.9 360 4.2 kN 30135



NOTES:

- Radiation patterns and gain values at thetable are including the effect of supportingpole- Null fill, beam tilt, harness & feederlosses NOT INCLUDED



RADIO

ANTENNA

SYSTEMS



37


40/132




Band II 2 dipoles panelEspecially suitable for square mastsModel: AT12-220





Impedance 50 Ohm

VSWR 1.2:1



PressurizationNon


connector







Weight 58 Kg






Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(Kg)

Wind load(@160Km/h)

Systemheight(mm)

1

2 6.0 116 2.4 kN

22143 4.2 174 3.1 kN

4 3.0 232 3.9 kN

22 9.0 232 4.7 kN

54143 7.2 348 6.2 kN

4 6.0 464 7.8 kN

4

2 12.0 464 9.5 kN

118143 10.3 696 12.4 kN

4 9.0 928 15.7 kN

6

2 13.8 696 14.2 kN

182143 12.0 1044 18.6 kN

4 10.8 1392 23.5 kN

8

2 15.0 928 18.9 kN

246143 13.3 1392 24.8 kN

4 12.0 1856 31.4 kN



NOTES:



RADIO

ANTENNA

SYSTEMS



38


41/132




Band II 2 dipoles panelEspecially suitable for square mastsLight constructionModel: AT12-222





Impedance 50 Ohm

VSWR 1.2:1

Maximum power handling 2.5 kW




Hot dip galvanized steelABS / MMA UVA high protection





Weight 36 Kg



Vertical spacing 3200 mmGrounding DC grounded


Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(Kg)

Wind load

(@160km/h)

System

height(mm)

1

2 6.0 72 1.9 kN

22143 4.2 108 2.5 kN

4 3.0 144 3.1 kN

22 9.0 144 3.8 kN

54143 7.2 216 5.0 kN

4 6.0 288 6.2 kN

4

2 12.0 288 7.6 kN

118143 10.3 432 9.9 kN

4 9.0 576 12.6 kN

6

2 13.8 432 11.4 kN

182143 12.0 648 14.9 kN

4 10.8 864 18.8 kN

8

2 15.0 576 15.1 kN

246143 13.3 864 19.8 kN4 12.0 1152 25.1 kN



NOTES:



RADIO

ANTENNA

SYSTEMS



39


42/132




Band II 2 dipoles panelEspecially suitable for triangular mastsModel: AT12-223





Impedance 50 Ohm

VSWR 1.22:1




MaterialsStructureFeed points radome






Weight 65 kg





Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Wind load(@160km/h)

Systemheight(mm)

12 4.0 130 2.9 kN

22143 2.2 195 4.4 kN

2

2 7.0 260 5.8 kN

54143 5.2 390 8.8 kN

42 10.0 520 11.6 kN

118143 8.3 780 17.6 kN

62 11.8 780 17.4 kN

182143 10.0 1170 26.5 kN

82 13.0 1040 23.1 kN

246143 11.3 1560 35.3 kN



NOTES:

- Table supplies data up to 8 bays onlyfor simplification purposes; systems withmore bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.


RADIO

ANTENNA

SYSTEMS



40


43/132




Band II 2 dipoles panel

Especially suitable for square masts

Model: AT12-221





Impedance 50 Ohm

VSWR 1.2:1



PressurizationNon


connector







Weight 58 kg





Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(Kg)

Wind load(@160Km/h)

Systemheight(mm)

1

2 4.5 116 2.4 kN

17003 2.7 174 3.1 kN

4 1.5 232 3.9 kN

2

2 7.5 232 4.7 kN

49003 5.7 348 6.2 kN

4 4.5 464 7.8 kN

4

2 10.5 464 9.5 kN

113003 8.7 696 12.4 kN

4 7.5 928 15.7 kN

6

2 12.3 696 14.2 kN

177003 10.5 1044 18.6 kN

4 9.3 1392 23.5 kN

8

2 13.5 928 18.9 kN

241003 11.7 1392 24.8 kN

4 10.5 1856 31.4 kN



NOTES:- Table supplies data up to 8 bays onlyfor simplification purposes; systemswith more bays are available.- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures without



RADIO

ANTENNA

SYSTEMS



41


44/132




Band II 2 dipoles panelEspecially suitable for square mastsLight constructionModel: AT12-227





Impedance 50 Ohm

VSWR 1.2:1

Maximum power handling 2.5 kW




Hot dip galvanized steelABS / MMA UVA high protection





Weight 36 Kg






Humidity 100%

Number

of Bays

Number ant.

per bay

Peak gain

(dBd)

Weight

(Kg)

Wind load(@160Km/h)

Systemheight(mm)

1

2 4.5 72 1.9 kN

17003 2.7 108 2.5 kN

4 1.5 144 3.1 kN

22 7.5 144 3.8 kN

49003 5.7 216 5.0 kN4 4.5 288 6.2 kN

4

2 10.5 288 7.6 kN

113003 8.7 432 9.9 kN4 7.5 576 12.6 kN

6

2 12.3 432 11.4 kN

177003 10.5 648 14.9 kN

4 9.3 864 18.8 kN

8

2 13.5 576 15.1 kN

241003 11.7 864 19.8 kN

4 10.5 1152 25.1 kN



NOTES:

- Radiation patterns and gain values at thetable are including the effect of supportingpole- Null fill, beam tilt, harness & feederlosses NOT INCLUDED.- Wind load & weight figures withoutconsidering cables, splitters & hardware.


RADIO

ANTENNA

SYSTEMS



42


45/132




Band II FM circular dipoles antennaSide-mount circular polarizationModel: AT12-200


Peak gain 0.2 dB (ref. /2 dipole, 50 mm pole)

3 dB beam width Horizontal: 360 Vertical: 86

Polarization Circular

Impedance 50 Ohm

VSWR 1.1:1

Bandwidth 500 KHz

Maximum power handling 500 W

Connector type N


Materials Stainless steel




Weight 5 kg


Vertical spacing 0.8 0.9 typical



Humidity 100%

Numberof Bays

Number ant.per bay

Peak gain(dBd)

Weight(kg)

Documents

ANTENNAS RYMSA 2014