Aral Ind Pg09

  • Upload
    ricm152

  • View
    220

  • Download
    0

Embed Size (px)

Citation preview

  • 7/25/2019 Aral Ind Pg09

    1/19

    Adhesive LubricantsProduct Name Viscosity (mm/s) Density

    (g/ml)

    15 C

    Pour Point

    C

    Flash Point

    C

    Product Description

    40 C 100 C

    Slide Way OilsAral Deganit B 68 68 9.0 0.880 -7 10 Aging-resistant special adhesive oils, type CGLP as defi-

    ned by DIN 5150 with excellent adhesion performance.Minimizes friction between slide ways and guides, and

    prevents stick-slip-motion.

    Aral Deganit B 100 100 11.0 0.886 -7 1Aral Deganit B 150 154 15.5 0.890 -1 48

    Aral Deganit B 0 0 19.0 0.894 -1 4

    Aral Deganit BW 68 68 9.0 0.881 -3 8 Adhesive oils, type CGLP as defined by DIN 5150 with

    excellent demulsification properties. For lubricating slide

    ways which can come in contact with water-miscible

    cutting fluids. Prevents mixing with water-miscible

    cutting fluids.

    Aral Deganit BW 100 100 11.0 0.887 -1 3

    Aral Deganit BW 0 0 19.0 0.894 -18 37

    Aral Deganit BWX 68 68 9.0 0.877 -9 44 Adhesive oils, type CGLP as defined by DIN 5150 with

    excellent demulsification and adhesion properties. For

    lubricating slide ways which can come in contact with

    water-miscible cutting fluids. Prevents mixing with water-

    miscible cutting fluids.

    Aral Deganit BWX 0 0 18.7 0.890 -9 48

    Aral Deganit BO 68 68 8.8 0.884 -1 40 Aging-resistant special adhesive oils, type CGLP as defi-ned by DIN 5150 with excellent adhesive properties. For

    lubricating slide ways, also suitable for use as hydraulic

    oil as well as for lubricating bearings and gears.

    Aral Deganit BO 0 0 19.3 0.894 -15 0

    Aral Deganit 4035 48 1.0 0.894 -15 60 Silicone- and chlorine-free slide way oils with selected

    high-pressure additives, safety oil for most extreme

    stress. Recommended by UNIONGERA, manufacturer of

    heavy-duty equipment.

    Aral Deganit KB 370 370 5.0 0.904 -1 60 Slide way oil for operations under heavy loads. Especially

    suitable for lubricating slide ways under impact-type

    stress or under multi-directional loads as well as for

    lubricating spindles, stands and brackets.

    Saw Chain OilsAral Deganit S 100 100 10.0 0.930 -4 30 Partially synthetic saw chain oil for lubricating andcooling chainsaws.

    Aral Deganit BA 60 14.0 0.90 -7 80 Environmentally friendly saw chain oil based on fully

    biodegradable vegetable oils. No mineral oil content.

    For use in chainsaws. Meets RAL-UZ 48 requirements

    and carries the Blue Angel label for environmental

    friendliness.

    Synthetic Saw Chain OilAral Deganit HT 60 0 1.0 0.90 -33 >30 Fully synthetic high-temperature chain oil with ester base

    and friction-reducing high-performance additives. For

    use in lubricating drying and tensioning frames in the

    textile industry, chains in paint and drying plants and

    other machine components under high thermal stress.

    Operating temperature range up to +50C, short-term

    temperature peaks: +80C

    Overview of Aral Products