Upload
amar-musovic
View
220
Download
0
Embed Size (px)
DESCRIPTION
junk
Citation preview
BS 4449:1997 (Great Britain)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensions
Nominal weight (mass) per unit of length, kg/m
Tolerances, %*Minimal number of bars
in a bundle, pcsDiameter, mmCross-sectional area,
mm2
8 50,3 0,395± 6,5
392
10 78,5 0,616 251
12 113,1 0,888
± 4,5
178
16 201,1 1,579 100
20 314,2 2,466 64
25 490,9 3,854 41
32 804,2 6,313 25*Upon agreement with the customer, minimal number of bars in the bundle can be ensured(bundle up to 2 t, bar length 12.0 m -0/+100 mm).
Mechanical properties
Steel gradeYield strength, R
e,
N/mm2
Ratio,R
m / R
e
Elongation,A
5, %
Total elongation at maximum force,
Agt
, %
Radius for rebend test,
degreesminimum
460B 460 1,08 14 5 45/23
BS 4449:2005 (Great Britain)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensionsNominal weight (mass) per unit of length, kg/m
Tolerances, %*Minimal number of bars
in a bundle, pcsDiameter, mmCross-sectional area
in mm2
8 50,3 0,395 ± 6,0 394
10 78,5 0,617
± 4,5
256
12 113,0 0,888 178
16 201,0 1,580 100
20 314,0 2,470 64
25 491,0 3,850 41
32 804,0 6,310 25*Upon agreement with the customer, minimal number of bars in the bundle can be ensured (bundle of up to 2 t, cut length of 12.0 m -0/+100 mm).
Mechanical properties
Steel gradeYield strength,
Re, N/mm2
Ratio,R
m / R
e
Total elongation at maximum force, A
gt, %
Radius for rebend test, degrees
B500B 500 1,08 5,090/20
B500C 500 ≥1,15<1,35 7,5
13