Upload
amar-musovic
View
220
Download
0
Embed Size (px)
DESCRIPTION
junk
Citation preview
Mechanical properties
GradeYield strength, f
yk,
MPa
Tensile strength,f
tk, MPa
Elongation,ε
sk, %
Ratio,f
tk/ f
yk
Radius for rebend test,
degreesminimum
S 400 400-520 500 12 1,25 90/20
NT 26.05 (1983) (Tunisia)
Product mix, standard dimensions and weight (cut lengths)
Nominal dimensionsNominal weight (mass) per unit
of length, kg/m*Minimal number of bars in a
bundle, pcsDiameter,mm
Cross-sectional area,mm2
8 50,3 0,395 389
10 78,5 0,617 256
12 113 0,888 178
14 154 1,208 130
16 201 1,578 100
20 314 2,466 64
25 491 3,854 41
32 804 6,313 25*Upon agreement with the customer, minimal number of bars in the bundle can be ensured(bundle up to 2 t, bar length 12.0 m -0/+100 mm
Mechanical properties (grade 40)
Nominal diameter,mm
Yield strength, Re, N/mm2 Tensile strength,
Rm, N/mm2
Elongation,A
5, % Radius for bend test,
degrees
minimum
≤ 20 410490 14 180
> 20 390
CAN/CSA-G30.18-M92 (Canada)
Product mix, standard dimensions and weight (cut lengths)
Bar designation
Nominal dimensions Weight (mass) per unit of
length, kg/m
Tolerances,%
*Minimal number of bars in a bundle, pcsDiameter, mm
Cross-sectional areain mm2
10 11,3 100 0,785
- 6
201
15 16,0 200 1,570 100
20 19,5 300 2,355 67
25 25,2 500 3,925 40
30 29,9 700 5,495 28*Upon agreement with the customer, minimal number of bars in the bundle can be ensured(bundle up to 2 t, bar length of 12.0 . -0/+100 mm).
Mechanical properties (grade 400W)
Bar designationYield strength,
MPa
Tensile strength,MPa
Ratio of tensile strength to yield
strengthElongation, % Radius for bend test,
degrees
minimum
10, 15, 20, 25 400-525 540 1,15
13180
30 12
16