BESⅢ DAQ数据库bes3db.ihep.ac.cn/main/data-dict/online.doc · Web viewphysicsAnalysisConfiguration text A string that defines the sole configuration parameter for the Physics

Data Dictionary of BESIII DAQ database

Mary ChenDAQ Group

2008.10.23

Data Dictionary of BESIII DAQ database V2.0（2008-

10-23 English）

Data Dictionary of BESIII DAQ database V2.0（2008-10-23 English）........................................21. Introduction.......................................................................................................................92. database: Calibration.......................................................................................................10

2.1. table: EMC_Gain............................................................................................102.2. table: EMC_XXX_Crate_YY.........................................................................102.3. table: MDC_X_Crate_YY (X：Q/T，YY：32-39，48-55)..........................152.4. table: TOF_Q_Crate_XX (XX：64、65).......................................................18

3. database: PED.................................................................................................................213.1. table: EMC_Crate_xx (xx：96-103，114-119)..............................................213.2. table: MDC_Crate_xx (xx:32-39, 48-55)........................................................24

4. database: RunInfo...........................................................................................................284.1. table: Calib_PED.............................................................................................284.2. table: OnlineLum............................................................................................284.3. table: RunParams............................................................................................294.4. table: StorageInfo............................................................................................30

5. database: TrgTable..........................................................................................................315.1. table: Tmp_TrgTable......................................................................................315.2. table: TrgTable................................................................................................335.3. table: TrgType.................................................................................................365.4. table: users......................................................................................................36

6. database: configdb..........................................................................................................376.1. table: Application............................................................................................386.2. table: Attributes...............................................................................................396.3. table: Binary....................................................................................................406.4. table: BinaryFile..............................................................................................416.5. table: CircDataOut..........................................................................................41

2

6.6. table: Classes...................................................................................................426.7. table: Component............................................................................................426.8. table: Computer...............................................................................................426.9. table: ComputerParameters.............................................................................436.10. table: ComputerProgram.................................................................................436.11. table: ConfInfo................................................................................................446.12. table: Crate......................................................................................................446.13. table: DCApplicationConfig...........................................................................466.14. table: DCMulticastGroup................................................................................476.15. table: DC_ISResourceUpdate.........................................................................486.16. table: DFApplication.......................................................................................486.17. table: DFApplicationConfig............................................................................506.18. table: DFMApplication...................................................................................506.19. table: DFMConfiguration................................................................................526.20. table: DFMessagePassingNode.......................................................................546.21. table: DFParameters........................................................................................546.22. table: Data.......................................................................................................556.23. table: DataDrivenTriggerIn.............................................................................556.24. table: DataFile.................................................................................................566.25. table: DataFlowParameters.............................................................................566.26. table: DcDataOut.............................................................................................566.27. table: DcTriggerIn...........................................................................................566.28. table: Detector.................................................................................................576.29. table: DummyReadoutModule........................................................................576.30. table: EFD_Application..................................................................................586.31. table: EFD_Barrier..........................................................................................606.32. table: EFD_Configuration...............................................................................606.33. table: EFD_EndTask.......................................................................................616.34. table: EFD_ExtPTsTask..................................................................................616.35. table: EFD_InputTask.....................................................................................626.36. table: EFD_LogFilter......................................................................................626.37. table: EFD_LogLevel......................................................................................636.38. table: EFD_OutputTask..................................................................................636.39. table: EFD_QueueTask...................................................................................636.40. table: EFD_SharedHeap..................................................................................646.41. table: EFD_Task.............................................................................................646.42. table: EFIOConfiguration................................................................................656.43. table: EFO.......................................................................................................656.44. table: EF_SubFarm.........................................................................................656.45. table: EMCCalibration....................................................................................666.46. table: EMCChooseRange................................................................................676.47. table: EMCMonitor.........................................................................................686.48. table: EMCPed................................................................................................696.49. table: EMCSubSystem....................................................................................69

3

6.50. table: EQM......................................................................................................706.51. table: ETC.......................................................................................................756.52. table: EmulatedDataOut..................................................................................756.53. table:EmulatedHardwareTriggerIn..................................................................766.54. table: EmulatedReadoutModule......................................................................766.55. table: EmulatedSequentialReadoutModule.....................................................776.56. table: EmulatedSingleFragmentReadoutModule.............................................776.57. table: EmulatedTriggerIn................................................................................786.58. table: EthSequentialReadoutModule...............................................................786.59. table: EventCastorStorage...............................................................................786.60. table: EventStorage.........................................................................................796.61. table: FCTL.....................................................................................................796.62. table: FEMApplication....................................................................................806.63. table: FEMConfiguration................................................................................826.64. table: FilarReadoutModule..............................................................................826.65. table: FpgaProgram.........................................................................................836.66. table: GATHERERApplication.......................................................................846.67. table: GATHERERConfiguration...................................................................856.68. table: HW_Object...........................................................................................866.69. table: HW_System..........................................................................................866.70. table: HardwareTriggerIn................................................................................866.71. table: IOManager............................................................................................876.72. table: InputChannel.........................................................................................886.73. table: Interface.................................................................................................886.74. table: InterfaceMap.........................................................................................896.75. table: JarFile....................................................................................................896.76. table: L2DummySteering................................................................................906.77. table:L2DummyStep.......................................................................................906.78. table: L2PUApplication..................................................................................906.79. table: L2PUConfiguration...............................................................................926.80. table: L2SVApplication..................................................................................936.81. table: L2SVConfiguration...............................................................................956.82. table: Layers....................................................................................................966.83. table: LinkInterface.........................................................................................966.84. table: MCC......................................................................................................976.85. table: MDCCalibration....................................................................................976.86. table: MDCChooseRange................................................................................986.87. table: MDCPed................................................................................................986.88. table: MDCSubSystem....................................................................................996.89. table: MDC_Inner...........................................................................................996.90. table: MDC_Outer.........................................................................................1006.91. table: MDC_Step...........................................................................................1006.92. table: MQT....................................................................................................1016.93. table: MROC.................................................................................................103

4

6.94. table: MTI.....................................................................................................1036.95. table: MUONROC........................................................................................1036.96. table: MUONROMO.....................................................................................1046.97. table: MUONSubSystem...............................................................................1046.98. table: MemoryPool........................................................................................1056.99. table: MessageLossEmulation.......................................................................1066.100. table: Methods...............................................................................................1066.101. table: Module................................................................................................1066.102. table: MonObjectGroupConf.........................................................................1086.103. table: MonitoringApplication........................................................................1096.104. table: MySQLConfiguration..........................................................................1116.105. table: Network...............................................................................................1116.106. table: NetworkInterface.................................................................................1116.107. table: NonPhysicsParams..............................................................................1126.108. table: NullTriggerIn.......................................................................................1126.109. table: OHCApplication..................................................................................1136.110. table: OHCConfiguration..............................................................................1156.111. table: OHCHistogram....................................................................................1156.112. table: OHCMethod........................................................................................1156.113. table: OHFCell..............................................................................................1166.114. table: OHFCellSet.........................................................................................1166.115. table: OHFConfiguration...............................................................................1166.116. table: OHFEFViarable...................................................................................1176.117. table: OHFFillingConfiguration....................................................................1176.118. table: OHFFillingRange................................................................................1186.119. table: OHFHistogram....................................................................................1186.120. table: OHFHistogramAxes............................................................................1196.121. table: OHFHistogramInfo.............................................................................1196.122. table: OHFLayer............................................................................................1196.123. table: OHFLayerSet......................................................................................1206.124. table: OHFMUCLayerSet.............................................................................1206.125. table: OHFPublishConf.................................................................................1206.126. table: OHGApplication.................................................................................1216.127. table: OHGConfiguration..............................................................................1236.128. table: OHGHistogram...................................................................................1236.129. table: OHGProviders.....................................................................................1236.130. table: OHSApplication..................................................................................1246.131. table: OHSConfiguration..............................................................................1256.132. table: OnlineSegment....................................................................................1266.133. table: PPCApplication...................................................................................1276.134. table: PPCConfiguration...............................................................................1296.135. table: PPCModule.........................................................................................1296.136. table: PTApplication.....................................................................................1296.137. table: PTConfiguration..................................................................................131

5

6.138. table: Parameter.............................................................................................1326.139. table: Partition...............................................................................................1326.140. table: Platform...............................................................................................1336.141. table: PreloadedReadoutModule...................................................................1346.142. table: PseudoROSModule.............................................................................1346.143. table: PtDummySteering...............................................................................1346.144. table: RCD....................................................................................................1356.145. table: RM_Computer_Resource....................................................................1376.146. table: RM_HW_Resource.............................................................................1386.147. table: RM_Resource......................................................................................1386.148. table: RM_SW_Resource..............................................................................1396.149. table: ROS.....................................................................................................1396.150. table: ROSApplication..................................................................................1426.151. table: ROSE..................................................................................................1446.152. table: ROSEConfiguration............................................................................1476.153. table: Rack....................................................................................................1476.154. table: ReadoutApplication.............................................................................1476.155. table: ReadoutModule...................................................................................1486.156. table: ReadoutOutput....................................................................................1486.157. table: ReadoutTrigger....................................................................................1486.158. table: Relationships.......................................................................................1496.159. table: Resource..............................................................................................1496.160. table: RoIBApplication.................................................................................1496.161. table: RoIBConfiguration..............................................................................1516.162. table: RobinDataChannel..............................................................................1526.163. table: RobinExpertParameter........................................................................1536.164. table: RobinReadoutModule.........................................................................1536.165. table: RootStorage.........................................................................................1556.166. table: RunControlApplication.......................................................................1556.167. table: SFIApplication....................................................................................1576.168. table: SFIConfiguration.................................................................................1596.169. table: SFOApplication...................................................................................1606.170. table: SFOConfiguration...............................................................................1626.171. table: Slink....................................................................................................1636.172. table: SLinkDataOut.....................................................................................1636.173. table: SLinkEthernet.....................................................................................1646.174. table: SLinkFILAR.......................................................................................1646.175. table: SLinkSSPCI........................................................................................1646.176. table: SSPCIReadoutModule.........................................................................1656.177. table: SW_Object..........................................................................................1656.178. table: SW_Repository...................................................................................1666.179. table: Schemes...............................................................................................1676.180. table: Script...................................................................................................1676.181. table: Segment...............................................................................................168

6

6.182. table: SpecificPackagesError.........................................................................1686.183. table: TCLK..................................................................................................1696.184. table: TCPDataOut........................................................................................1696.185. table: TCPTriggerIn......................................................................................1706.186. table: TCPTriggerReadoutModule................................................................1716.187. table: TFEE...................................................................................................1716.188. table: TMON.................................................................................................1726.189. table: TOFCalibration...................................................................................1746.190. table: TOFChooseRange...............................................................................1756.191. table: TOFMonitor........................................................................................1756.192. table: TOFPed...............................................................................................1756.193. table: TOFSubSystem...................................................................................1766.194. table: TROC..................................................................................................1776.195. table: Tag......................................................................................................1776.196. table: Test......................................................................................................1786.197. table: Test4Class...........................................................................................1796.198. table: Test4Object.........................................................................................1806.199. table: TrgTable..............................................................................................1816.200. table: Trg_CLKF...........................................................................................1846.201. table: Trg_EACC..........................................................................................1846.202. table: Trg_EACC_Debug..............................................................................1866.203. table: Trg_FCTL...........................................................................................1876.204. table: Trg_GTL.............................................................................................1886.205. table: Trg_LTKC...........................................................................................1926.206. table: Trg_MUDT.........................................................................................1926.207. table: Trg_MUTL..........................................................................................1936.208. table: Trg_SAF..............................................................................................1946.209. table: Trg_STKC...........................................................................................1966.210. table: Trg_TCBA..........................................................................................1966.211. table: Trg_TDC.............................................................................................1976.212. table: Trg_TFCF...........................................................................................1996.213. table: Trg_TKF.............................................................................................1996.214. table: Trg_TKFGeneral.................................................................................2006.215. table: Trg_TOFT...........................................................................................2016.216. table: Trg_TROC..........................................................................................2026.217. table: Users....................................................................................................2036.218. table: Variable...............................................................................................2036.219. table: VariableSet..........................................................................................2036.220. table: ptioEfd.................................................................................................2046.221. table: ptioFile................................................................................................2046.222. table: ptioMon...............................................................................................204

7. database: hwconfig........................................................................................................2067.1. table: Bcode..................................................................................................2067.2. table: Ecode...................................................................................................206

7

7.3. table: MainAmpToQ.....................................................................................2077.4. table: TFEEConfig........................................................................................2077.5. table: Wcode.................................................................................................2087.6. table: mdcinfo...............................................................................................208

8. database: part_trg1234pt (information of dataflow)....................................................2108.1. table: DFM_1................................................................................................2118.2. table: L2SV_1...............................................................................................2128.3. table: OnlineLum..........................................................................................2128.4. table: ROS_ROS_n.......................................................................................2148.5. table: ROS_ROS_n_Expert_Core.................................................................2158.6. table: ROS_ROS_n_Expert_DataChannels...................................................2168.7. table: ROS_ROS_n_Expert_DataOut...........................................................2168.8. table: ROS_ROS_n_Expert_InterruptCatcher...............................................2168.9. table: ROS_ROS_n_Expert_ReadoutModule...............................................2168.10. table: ROS_ROS_n_Expert_SequentialInputHandler...................................2178.11. table: ROS_ROS_n_Expert_TriggerIn..........................................................2178.12. table: ROS_ROS_n_Expert_UserActionScheduler.......................................2178.13. table: SFI_n...................................................................................................2188.14. table: SFO_n.................................................................................................219

8

1. Introduction

The information of BESIII DAQ database include ‘Calibration’, ‘PED’, ‘RunInfo’, ‘TrgTable’, ‘configdb’, ‘hwconfig’ and ‘part_trg1234pt’. Database ‘Calibration’ stores the calibration information of MDC, EMC and TOF system and the information of EMC Gain. Database ‘PED’ stores the pedestal information of MDC and EMC system. Database ‘RunInfo’ stores the base information of run, including the information of data file stored in local of DAQ or castor. Database ‘TrgTable’ is used by trigger group to set trigger table on web. Database ‘configdb’ stores the information of DAQ configuration, including hardware configuration of every detector, electronics and trigger subsystem. Database ‘hwconfig’ stores the corresponding relationships between layer number, thread number of detector and crate, module, channel no of electronics, and the code of crate, module, channel in DAQ configuration. Database ‘part_trg1234pt’ is the dataflow information of DAQ system. The detail information will be list below.

9

2. database: Calibration

2.1. table: EMC_Gain

Field Type Descriptions

id int(11) Auto increment, primary key

run_id int(11) Run number of data acquisition for EMC Gain

mode_id varchar(10) analysis mode of EMC Gain data

time datetime time

ppc_id varchar(10) Id of PowerPC

Qmodule_no tinyint(11) Number of EMC Q module

Qchannel_no tinyint(11) Channel number of EMC Q module

Acrate_no tinyint(4) MainAmp crate number

Amodule_no tinyint(4) Number of MainAmp module

10

Achannel_no tinyint(4) Channel number of MainAmp module

Aaddress tinyint(4) Address of MainAmp module

gain int(11) Gain value

2.2. table: EMC_XXX_Crate_YY

（XXX:HIGH/MID/LOW，YY:96-103,112-119）Field Type Descriptions


run_number int(11) Run number

time datetime Time

module_no int(11) Module number

a2_channel_1 float The second item of calibration parameter of channel 1

a1_channel_1 float The first item of calibration parameter of channel 1

a0_channel_1 float The constant of calibration parameter of channel 1

rms_channel_1 float The rms value of channel 1


















11


































12


































13


































14









2.3. table: MDC_X_Crate_YY (X：Q/T，YY：32-39，48-55)




time datetime Time


















15


































16


































17















2.4. table: TOF_Q_Crate_XX (XX：64、65)




time datetime Time












18


































19






















20

3. database: PED

3.1. table: EMC_Crate_xx (xx：96-103，114-119)




time datetime Time


average_value_1 float Average value of channel 1

sigma_value_1 float Sigma value of channel 1

effective_rate_1 int(11) Effective rate of channel 1





















21

































22


































23









3.2. table: MDC_Crate_xx (xx:32-39, 48-55)

Field Type Descriptionsid int(11) Auto increment, primary key


time datetime

Time


















24












average_value_10

float Average value of channel 10



average_value_11




average_value_12




average_value_13




average_value_14




average_value_15




25

average_value_16




average_value_17




average_value_18




average_value_19




average_value_20




average_value_21




average_value_22




average_value_23




average_value_24



26


average_value_25




average_value_26




average_value_27




average_value_28




average_value_29




average_value_30




average_value_31




average_value_32




27

4. database: RunInfo

4.1. table: Calib_PED

The information of calibration and PED used into physics run.



time datetime Time

MDCQCalib int(11) The run number of MDC Q calibration.->Calibration.MDC_Q*.run_number

MDCTCalib int(11) The run number of MDC T calibration.-> Calibration.MDC_T*.run_number

MDCPED int(11) The run number of MDC PED ->PED.MDC*.run_number

TOFCalib int(11) The run number of TOF calibration.->Calibration.TOF*.run_number

EMCCalib int(11) The run number of EMC calibration.->Calibration.EMC*.run_number

EMCPED int(11) The run number of EMC PED.->PED.EMC*.run_number

EMCGain varchar(50) The join of run_id and mode_id of EMC Gain.->Calibration.EMCGain.(run_id)_(mode_id)

28

4.2. table: OnlineLum

The online luminosity of every run.




NumCorBEE int(11) The value is the corrected number of e+ e- events in this run

NumCorEEE int(11) The value is the corrected number of e+ e- events in this run.

NumCorUU int(11) The value is the corrected number of dimuon events in this run.

NumCorGG int(11) The value is the corrected number of diphoton events in this run.

NumCorHadron int(11) The value is the corrected number of hadronic events in this run.

SNR float The value is the ratio between signal and noise.

IntLumEndcapEE float The integral luminosity(nb^-1) is calculated by the number of Endcap e+ e- events.

XSecbyEndcapEE float The cross section(nb) of hadron is calculated by LumEndcapEE.

4.3. table: RunParams




max_events int(11) Maximum of events can be stored in this run

rec_enable int(11) Enable store data in file.

trigger_type int(11) Trigger type, now is not used

run_type varchar(20) Run type（Physics、Calibration、PED、Monitor）

detector_mask int(11) Detector mask, now is not used

29

beam_type int(11) Beam type

beam_energy float Beam energy, it is e+ energy in START record, e- energy is END record.

filename_tag varchar(255) Tag of filename

timeSOR datetime Time of run start

timeEOR datetime Time of run end

totalTime int(11) Total time of run

numberOfEvents int(32) Number of events stored in local of DAQ

numberOfEvents_Castor int(32) Number of events stored in castor.

config_id int(11) Corresponding to the DAQ configuration.->configdb.ConfInfo.ConfId

trgtable_id int(11) Corresponding to the used trigger table.

->configdb.TrgTable.Obj_id

calib_ped_id int(11) Corresponding to the information of calibration and PED.->Calib_PED的 id

versionNum float Version number of DAQ data format

status enum('START', 'END', 'INSTART')

run status, it shows this record is recorded in run start, running or run end.

All information will be updated in run start and run end and a new record will be written into this table. The record which status is ‘INSTART’ is written into this table when run start and updated in real time. Only timeEOR, numberOfEvents, numberOfEvents_Castor will be updated. If the run is stopped abnormal, the record which status is ‘END’ will be lost.

4.4. table: StorageInfo

This table records information of all data file stored in local of DAQ or castor.



time datetime time

runNumber int(11) Run number->RunParams.run_number

30

host varchar(50) The host name used to store data file.

fileName varchar(255) Data file name

status varchar(50) File status（‘opened’、‘closed’）numberOfEvents int(11) Number of events in the file

5. database: TrgTable

This database is used by trigger group to modify or update trigger table on web. After set the record ‘active’, then the trigger table will be written into DAQ configuration, and it will be used in next run after reload db in DAQ system. The really trigger table in DAQ configuration will be stored in TrgTable table of configdb database.

5.1. table: Tmp_TrgTable

This is a temporary table for storing the information of trigger table. It is not used for user.


Time datetime time

User varchar(50) User who update the trigger table

TrgTypeId int(11) Type fo trigger table, it shows the trigger table is used in test, cosmic test or other.

Active tinyint(4) active/inactive, active shows this trigger table will be used in next run.

Remark varchar(255) remark

31

ChEnable varchar(10) Event channel enable

CH01_1 varchar(10) Parameter 1 of trigger channel 1
































32

































33

5.2. table: TrgTable



Time datetime Time

User varchar(50) User who update the trigger table

TrgTypeId int(11) Type fo trigger table, it shows the trigger table is used in test, cosmic test or other.

Active tinyint(4) active/inactive, active shows this trigger table will be used in next run.

Remark varchar(255) remark

ChEnable varchar(10) Event channel enable






















34


































35











5.3. table: TrgType

Field Type Descriptionsid int(11) id

Type varchar(255)

Type of trigger table, test, cosmic test, or other. It is defined by trigger group.

5.4. table: users


id int(11) Id

UserName varchar(50) User name to loggin the webpage of trgtable.

Passwd varchar(50) User password

Type enum('admin', 'common') User type used to confirm user popedom

36

6. database: configdb

The database ‘configdb’ is the DAQ configuration database. It is includes all the configuration information of DAQ system. Table ‘ConfInfo’ is the first table, it descripts the patition, datafiles and schemafiles in the configuration. Table ‘Data’ records the information of all data files, includes file name, file path, file contents and objects in the file (show as classname@Obj_id). Table ‘classname’ descripts all the information of objects. Table ‘Schemes’ records the information of all schema files, includes file name, file path and file contents.The relationships of every table is list in below picture.

37

6.1. table: Application

This class is used to describe processes which can be started at certain moment and order. To describe a new process it is necessary to create an instance of this class and put references to the software object (i.e. ComputerProgram class) to describe what to start and the Computer to describe where to start. The Initialization and Shutdown dependencies are used in case if we want to start a process synonymously and we know which one we must start or kill first.


Obj_id int(11) Auto increment, primary key

FileId int(11) Id of DataFile，->Data.DataFileid

OID varchar(255) Object ID

Name text Object name

Parameters text Command line parameters

38

RestartParameters text Command line parameters to restart application in case of application failure.

ControlledByOnline varchar(10) When the value is true, it is assumed that the application is controlled by the Online SW. This requires pmg_agent to be started at boot time on host where the application will be started.

IfDies enum('Error', 'Ignore', 'Restart')

If the application dies after succesfull start-up, it could be restarted. Dies means that the application exits.

IfFailed enum('Error', 'Ignore', 'Restart')

If the application failed, it could be restarted.Failed; means that the application terminates due to a signal.

StartAt enum('Boot', 'SOR', 'EOR', 'Shutdown', 'UserDefined')

The application is started at appropriate moment if the value is not equal to UserDefined(SOR/EOR = Start/End of run).

StopAt enum('SOR', 'EOR', 'Shutdown', 'UserDefined')

The application is stoped at appropriate moment if the value is not equal to UserDefined(SOR/EOR = Start/End of run).

InitTimeout int(10) Initialization timeout, i.e. maximum time for a process to go to state ready-to-communicate with others, e.g. a server start up time.

StartIn text Directory where to start the process.

InputDevice text If defined, it will be used as standard input.

Logging varchar(10) Indicates whether the stdout of this application shall be piped to /dev/null or stored in a log file

RunsOn text Defines computer device where to start the process.

InitializationDependsFrom text Defines processes to be started before this one.

ShutdownDependsFrom text Defines shutdown order.

Program text Defines computer program to be used

39

for this process.

ExplicitTag text If defined it points to the exact tag of computer program.

Uses text ->SW_Repository

ProcessEnvironment text ->Parameter

6.2. table: Attributes


Id int(11) Auto increment, primary key

ClassId int(11) The class id which the attribute belongs to

Name tinytext Name

Type enum('bool', 's8', 'u8', 's16', 'u16', 's32', 'u32', 'float', 'double', 'date', 'time', 'string', 'enum')

Data type

Format enum('dec', 'hex', 'oct') Data format

IsMultiValue enum('YES', 'NO') Whether it is multi value

IsNoNull enum('YES', 'NO') Whether it is no null

Range tinytext Data range

InitValue tinytext Initial value

Description text description

6.3. table: Binary



FileId int(11) Datafile id, ->Data.DataFileId

OID varchar(255) Object id

40

Name text Name

BinaryName text Binary name

Description text Description

Authors text Authors

HelpURL text Help URL

DefaultParameters text Default parameters

Needs text ->RM_Resource

BelongsTo text ->SW_RepositoryA software object can belong to some software repository.

Uses text ->SW_Repository A software object can use zero or many software repositories(here uses means that at least it needs shared libraries from them).


ExactImplementations text Is used to describe implementations differnt from default, e.g. having different binary name, command line parameters, environment, etc.If a program object is defined, there are no default implementations.

6.4. table: BinaryFile






Tag text ->Tag

6.5. table: CircDataOut

Output class for the IO Manager to send events to a circular buffer. Can work in both master and slave mode, either pretending to write out all the events or to skip them when the output buffer is full.

41





OutputCircName text This is the name of the output circular buffer.

SamplingGap int(10) Define the minimum gap between two sampled events. As a consequence, a maximum sampling ratio is defined. If the ThrowIfFull parameter is true, sampled event can be skipped if the buffer is full, else all the events are written as soon as there is room in the buffer. The default value (1) means that all the events are sent to the output, 0 means that no event is sent.

OutputDelay int(10) Delay the output

BufferSize int(10) The size of the circular buffer to be used. BufferSize=0 means that the access will be in slave mode (i.e., the buffer is created by someone else).

ThrowIfFull varchar(10) If the ThrowIfFull parameter is true, sampled event can be skipped if the buffer is full, else all the events are written as soon as there is room in the buffer, thus generating backpressure.

6.6. table: Classes


ClassId int(11) Auto increment, primary key

SchemaFileId int(11) The id of schemafile in the Schemes table.

ClassName tinytext Class name

SuperClasses tinytext Super classes

SubClasses tinytext Sub classes

Attributes tinytext Attributes

Relationships tinytext Relationships

Methods tinytext Methods

IsAbstract tinytext Is abstract?


42

6.7. table: Component





6.8. table: Computer

Describes a computer.





HW_Tag enum('i686-slc3', 'i686-rh73')

Set of all available hardware tags in the format: hardware platform-operating system;

Name text Name

Type text Hardware manufacture type.

Location text Physical location of hw object.


HelpLink text URL containing description.

InstallationRef text Reference to object from installation DB.

State varchar(10) If the state is true, the hw device is On.

Memory smallint(5) Memory in Mgb

CPU smallint(5) Computer performance.

RLogin text Defines command used for computer remote login. Examples: rsh, ash, ssh.

Interfaces text ->Interface

6.9. table: ComputerParameters

Discribe a computer parameters.

43







6.10. table: ComputerProgram





Name text Name







BelongsTo text ->SW_Repository A software object can belong to some software repository.



6.11. table: ConfInfo

This is the first table to search configuration.


ConfId int(11) Auto increment, primary key

44

PartitionId int(11) The id of Partition. ->Partition.Obj_id

PartitionName varchar(255) The name of Partition. ->Partition.Name

SchemaFileIds text The id of schema files in Schemes table. ->Schemes.SchemaFileId

DataFileIds text The id of data file in Data table. ->Data.DataFileId

6.12. table: Crate





Name text name







NumberOfSlots int(10) Number of slots

Position int(10) Position

LogicalId int(10) Logical id

NumberOfModules int(10) Number of modules

NumberOfEvents int(10) The max number of events

Modules text ->Module

BelongsTo text ->Rack

MROC text ->MROC

MCC text ->MCC

MTI text ->MTI

PPCModule text ->PPCModule

ETC text ->ETC

EFO text ->EFO

TFEE text ->TFEE

45

TMON text ->TMON

TROC text ->TROC

TCLK text ->TCLK

MUONROMO text ->MUONROMO

MUONROC text ->MUONROC

FCTL text ->FCTL

Trg_SAF text ->Trg_SAF

Trg_GTL text ->Trg_GTL

Trg_TDC text ->Trg_TDC

Trg_TROC text ->Trg_TROC

Trg_LTKC text ->Trg_LTKC

Trg_STKC text ->Trg_STKC

Trg_TKF text ->Trg_TKF

Trg_TKFGeneral text ->Trg_TKFGeneral

Trg_EACC text ->Trg_EACC

Trg_EACC_Debug text ->Trg_EACC_Debug

Trg_TCBA text ->Trg_TCBA

Trg_TOFT text ->Trg_TOFT

Trg_CLKF text ->Trg_CLKF

Trg_FCTL text ->Trg_FCTL

Trg_TFCF text ->Trg_TFCF

Trg_MUTL text ->Trg_MUTL

Trg_MUDT text ->Trg_MUDT

EMCMonitor text ->EMCMonitor

Trg_BASG text ->Trg_BASG

6.13. table: DCApplicationConfig

Configures AppControl, Monitoring and ErrorReporting



FileId int(11) Datafile id, -

46

>Data.DataFileId


verbose varchar(10) Determines if error output is verbose or not.

ErrorOutputStream enum('STDOUT', 'STDERR', 'MRS', 'LCTRL')

The output stream to use for errors.

DebugOutputStream enum('STDOUT', 'STDERR', 'MRS', 'LCTRL')

The output stream to use for debug statements.

DebugLevel enum('DEBUGLEVEL0', 'DEBUGLEVEL1', 'DEBUGLEVEL2', 'DEBUGLEVEL3')

Determines which debug messages to suppress.

SeverityLevel enum('INFO', 'WARNING', 'RECOVERABLE', 'FATAL')

Determines which error messages to suppress.

monitorActiveOnNodes text Describes on which nodes the stand-alone MonitorThread should be active, see description for activeOnNodes for class DC_ISResourceUpdate.

ISThreadResourceCheckInterval int(10) Interval in seconds for which the IS Resource QUEUE is checked for new/deleted Resources.

ISDefaultRsrcUpdateInterval int(10) Default interval in seconds for Resource updates to IS server. Zero means that Resource is not exported.

ISDefaultServer text Name of the default IS server.

ISlongTimeout int(10) Long timeout in seconds is used for eg, sleep when queue is empty

47

SpecificPackagesError text Debug/Severity levels for specific packages.

refDC_ISResourceUpdate text Defines an update interval and opt. IS server for each Resource.

6.14. table: DCMulticastGroup

A logical multicast group. Sending to this group will send the same message to all nodes that are part of this group. This might use Ethernet or UDP multicast, or simulate it in software when using TCP.





MulticastAddress text Either a protocol:IPAddress:port string, or a MACAddress in rawsock:AA:BB:CC:DD:EE:FF form.

6.15. table: DC_ISResourceUpdate





name text Name of the Resource exported to IS.

delay int(10) Delay between updates to the IS server in seconds.0 = not exported to IS.

isServer text The IS server to update. If not specified the defaultISServer is used.Field not used yet.

activeOnNodes text Describes which nodes a Resource is active on by giving node Name (eg ROS-4), node Type (eg L2PU) or all by keyword ALL.To exclude a node name or type, preceed it with an

48

exclamation mark ‘!’ (eg,!DFM-1).Inclusion/exclusion of nodes is done in the following order;1) inclusive node Name (eg ROS-4)2) exclusive node Name (eg !DFM-1)3) inclusive node Type (eg ROS)4) exclusive node Type (eg !DFM)5) inclusive all by keyword ALL

6.16. table: DFApplication

Derived from OnlineSW Application. Specific Parameters needed by a DF Application












If the application failed, it could be restarted.Failed means that the application terminates due to a signal.



StopAt enum('SOR', The application is stoped at

49

'EOR', 'Shutdown', 'UserDefined')

appropriate moment if the value is not equal to UserDefined (SOR/EOR = Start/End of run).





ActionTimeout int(11) Maximum time allowed to change a state.

ShortTimeout int(11) Minimum time allowed to change a state.

ProbeInterval int(11) Defines at what interval (in seconds) a controller shall probe its children.

FullStatisticsInterval int(11) Defines at what time interval (in seconds) the controller shall request complete operational statistics to its children.

IfError enum('Error', 'Ignore', 'Restart', 'Handle')

This attribute is used by the parent controller to know how to react in case that this controlled application goes in Error state or sends a FATAL error.




Program text Defines computer program to be used for this process.




50

DFApplicationConfig text ->DFApplicationConfigCommon DF application info.

6.17. table: DFApplicationConfig

Base class to define DC or ROS application configurations.





6.18. table: DFMApplication

Field Type descriptions












StartAt enum('Boot', 'SOR', 'EOR',

The application is started at appropriate moment if the value is not

51

'Shutdown', 'UserDefined')

equal to UserDefined(SOR/EOR = Start/End of run).


The application is stoped at appropriate moment if the value is not equal to UserDefined (SOR/EOR = Start/End of run).
















52



DFApplicationConfig text -> DFApplicationConfig

belongs_to text Link to multicast groups this node belongs to.

Interfaces text Describes alternative interfaces for message passing

DFMConfiguration text ->DFMConfiguration

MulticastToROS text ->DCMulticastGroup

6.19. table: DFMConfiguration

Describes the configuration for a group of DFMs.





TimeoutCycle_ms int(10) Length of one timeout cycle in ms.

TimeoutCredits int(10) Number of cycles before an event times out.

MaxReassign int(10) Number of times event will be reasked. Zero means there will be no reasking, events will time out for good in the DFM.

MaxInputQueueSize int(10) Max size of input queue

ClearGroupSize int(10) Grouping factor for clear messages.

53

DecisionGroupSize int(10) Grouping factor for DFM decision messages sent to ROSes (i.e. in push mode).

PullScenario varchar(10) This makes the choice of the message flow scenario for the event building. What we had until now corresponds to false.

TriggerSource enum('LVL2DecisionMessage', 'TTC', 'CORBO', 'EmulatedHardware', 'Internal')

Switch trigger source of the DFM.

InternalTriggerClearsPerAccept int(10) Used only in self-triggering mode. Specifies how many LVL2 rejects will be generated for every accept.

ExternalTriggerDelay_ms double Delay of external trigger in ms.

BackupSFI text sfi active only in emergency.

MinSFINum int(10) threshold when backup sfi active.

UpBSThreshold int(10) InputQueue threshold when open backup sfi.

DownBSThreshold int(10) InputQueue threshold when close backup sfi.

6.20. table: DFMessagePassingNode



54





6.21. table: DFParameters

Global configuration parameters for the DataFLow.





Name text Name

Protocol enum('udp', 'tcp', 'rawsock')

Protocol to use for default message passing.

BasePortMessagePassing smallint(5) Base port for the calculation of Ports for message passing.

BasePortMonitoring smallint(5) Base port for the calculation of Ports for monitoring.

BasePortEFD_SFI smallint(5) Base port for the calculation of Ports for EFD for the SFIs.

BasePortEFD_SFO smallint(5) Base port for the calculation of Ports for EFD for the SFOs.

UsesDataFiles text Link to the files containing raw detector data.

6.22. table: Data


DataFileId int(11) Auto increment, primary key

FileTime datetime File time

FileName varchar(255) File name

FileLocation varchar(255) File path

55

FileText mediumtext File content

Objects text Objects in the file

6.23. table: DataDrivenTriggerIn





DeleteGrouping int(10) groups the delete messages which go to the inout channels

QueueSize int(10) Determines the queue size between datainput and trigger.

QueueUnblockOffset int(10) The offset of unblock queue

RequestType enum('AllRequestWithRelease', 'EBRequestWithRelease')

Type of request instantiated when data arrives. Known types are: AllRequestWithRelease and EBRequestWithRelease.

6.24. table: DataFile





FileName text File name

6.25. table: DataFlowParameters


56




Name text Name

6.26. table: DcDataOut





6.27. table: DcTriggerIn






MessageLossEmulations text Specifies the percentage of lost messages arriving to the ROS (for clear, ROI and EB messages).

6.28. table: Detector





Name text Name


HelpLink text Help link

57

State varchar(10) State

LogicalId tinyint(3) Logical id

HW_Systems text ->HW_System

HW_Objects text ->HW_Object

Crates text ->Crate

Layers text ->Layers

6.29. table: DummyReadoutModule





ByteSwapping varchar(10) states if data coming into the device shall be swapped or not.

PhysicalAddress int(10) Physical address of the module.

InputFragmentType enum('RODFragment', 'ROSFragment')

Indicates which type of fragment flows into the IOManager.

DataSize enum('FIXED', 'RANDOM') Data size

6.30. table: EFD_Application

EFD Instance specific configuration.








ControlledByOnline varchar(10) When the value is true, it is assumed that the application is controlled by the

58

Online SW. This requires pmg_agent to be started at boot time on host where the application will be started.






The application is started at appropriate moment if the value is not equal to UserDefined (SOR/EOR = Start/End of run).











This attribute is used by the parent controller to know how to react in case that this controlled application goes in

59

Error state or sends a FATAL error.

sfi text LIst of SFI addresses to be used by the generic EFD configuration.

sfo text List of SFO addresses to be used by generic EFD configuraiton.

StartIn text Working directory for efd applications. Can be afs or nfs directory. CAUTION: Read emptyWD description !

clearWD varchar(10) Allows efd to delete all files in the working directory at startup. NOT IMPLEMENTED YET.








logStdOut text Log level for standard output.

logMRS text Log level for MRS

config text Generic configuration to use.

subFarm text The subfarm the efd belongs to

6.31. table: EFD_Barrier





name text Barrier instance name

desc text Describes role of barrier

60

log text Log filter to use

6.32. table: EFD_Configuration

Generic EFD configuration.





name text Generic configuration name

desc text Describes configuration and requirement

nbrWorker int(10) Number of concurrent worker threads

stopTimeout int(10) max time to stop and wait to become empty (sec)

unconfigTimeout int(10) max time to unconfigure and wait for threads to terminate (sec)

statePoll int(10) Thread state polling interval while waiting (sec)

statUpdateRate int(10) IS Information update rate expressed in seconds


logEvent text LogFilter for all events

logWork text Log Filter for the work manager

logWorker text Log Filter for all worker threads

ctlBarrier text Barriers controlled by start/stop. Will be initially locked until start is issued by the controller.

inputTasks text List of input task in configuration. For each input task a corresponding sfi address must be specified in the EFD_Application.

sharedHeap text SharedHeap instance to use in configuration.

6.33. table: EFD_EndTask

EFD dataflow path terminator task. Every incomming event is deleted. next shall be empty.




61


name text Task instance name

desc text Describes configuration and requirements


next text Successor tasks (order is relevant)

6.34. table: EFD_ExtPTsTask







overflowLimit int(10) Number of event overflow limit

maxProcessingTime int(10) Maximum processing time (sec)

retryProcessing enum('no', 'yes')

Retry processing event if PT crashes

answer text Answers accepeted by this instance. For each answer there must be a corresponding successor task.



barrier text Barrier to lock when overflow

6.35. table: EFD_InputTask

InputTask connected to SFI.






62


sfi int(10) Index of SFI in EFD_Application instance

dataTimeout int(10) EFIO protocol timeout (data wait timeout : msec)

queuedRequests int(10) Maximum pending event requests to SFI.




6.36. table: EFD_LogFilter

Predefined log filters.





name text Log level name

flags enum('Fatal', 'Error', 'Warning', 'Success', 'Info', 'Debug', 'Debug1', 'Debug2')

List of selected flags

6.37. table: EFD_LogLevel

Abstract class defining log level to be used by the instance.






6.38. table: EFD_OutputTask

Task sending out events to SFO. next shall be empty.

63








sfo int(10) Index of SFO in EFD_Application instance.

IfMonitored varchar(10) Monitor this data stream or not.




6.39. table: EFD_QueueTask

Abstract queue task. Every incomming event is queued for asynchronous processing by a Task specific thread.











6.40. table: EFD_SharedHeap

SharedHeap instance.



64



name text SharedHeap instance name

fileName text Path and name of file containing data

size int(10) SharedHeap size (Mbytes)

erase varchar(10) Specify if the SharedHeap file must be erased prior to create operation. If false the create operation will fail if the file already exist. This option is ignored in SharedHeap recovery process.


6.41. table: EFD_Task

Abstract task base class.









6.42. table: EFIOConfiguration





NagleEnable varchar(10) Switches the Nagle Algorithm for the EFIO TCP data transfer

TCPSendBufferSize smallint(5) Sets the TCP send buffer size. 0 means default.

TCPRecvBufferSize smallint(5) Sets the TCP receive Buffer size. 0 means default.

65

6.43. table: EFO





PhysAddress smallint(5) Physics address

Enable varchar(10) Module enable

DAC int(10) DAC value

CAL int(10) CAL value

BelongsTo text ->Crate

6.44. table: EF_SubFarm

Event Filter SubFarm segment





Name text Name

desc text Describes the sub farm content

Segments text ->Segment

UsesObjects text -> HW_Object

UsesSystems text -> HW_System

Resources text -> Resource

Infrastructure text Infrastructure applications are started before any other applications from given and all included segments.

Applications text -> Application

ProcessEnvironment text -> Parameter

IsControlledBy text ->RunControlApplication

DefaultTags text ->Tag

JarFiles text -> JarFile

66

Parameters text Parameters which are used by database objects belonging to this segment.

is text IS application to send statistics and monitoring information to

6.45. table: EMCCalibration





MySQLEnable varchar(10) If it is enable, the calibration result will be write into mysql database.

HistogramEnable varchar(10) If it is enable, the calibration data will be fill in histogram.

AbnormalChooseEnable varchar(10) Choose abnormal channel

FitHandler text Simulate type: linear, quadric

LowBegin smallint(5) Begin value of DAC in low range

LowEnd smallint(5) End value of DAC in low range

LowStep smallint(5) Step value of DAC in low range

MidBegin smallint(5) Begin value of DAC in middle range

MidEnd smallint(5) End value of DAC in middle range

MidStep smallint(5) Step value of DAC in middle range

HighBegin smallint(5) Begin value of DAC in high range

HighEnd smallint(5) End value of DAC in high range

HighStep smallint(5) Step value of DAC in high range

EMCChooseRange text -> EMCChooseRange

6.46. table: EMCChooseRange




67


A0MaxLow float Maximum value of a0 in low range

A0MinLow float Minimum value of a0 in low range





RMSMaxLow float Maximum value of rms in low range

RMSMinLow float Minimum value of rms in low range

A0MaxMid float Maximum value of a0 in mid range

A0MinMid float Minimum value of a0 in mid range





RMSMaxMid float Maximum value of rms in mid range

RMSMinMid float Minimum value of rms in mid range

A0MaxHigh float Maximum value of a0 in high range

A0MinHigh float Minimum value of a0 in high range





RMSMaxHigh float Maximum value of rms in high range

RMSMinHigh float Minimum value of rms in high range

6.47. table: EMCMonitor





RuntimesForNonNormalRun smallint(5) Run times

68





LowBegin smallint(5) Begin value of DAC in low range

LowEnd smallint(5) End value of DAC in low range

LowStep smallint(5) Step value of DAC in low range

MidBegin smallint(5) Begin value of DAC in middle range

MidEnd smallint(5) End value of DAC in middle range

MidStep smallint(5) Step value of DAC in middle range

HighBegin smallint(5) Begin value of DAC in high range

HighEnd smallint(5) End value of DAC in high range

HighStep smallint(5) Step value of DAC in high range

EMCChooseRange text ->EMCChooseRange

6.48. table: EMCPed








6.49. table: EMCSubSystem



69








ControlRegister int(10) Control register

CSR smallint(5) Control status register



Crates text ->Crate

Layers text ->Layer

6.50. table: EQM






Type text Module type.

Location text Physical location of module.





PhysAddress int(10) Physical address of module

CommAddress int(10) Communication address

Position smallint(5) Position of module

Width smallint(5) width


TriggerLatencyRegister int(10) Trigger latency register

70

SampleWindowRegister int(10) Sample window register

Channel1 int(10) The channel information of channel 1
































71

Enable varchar(10) Enable the module

CSR int(10) Control status register

OUTL1 varchar(10) OUTL1

MainAmpGeo1 int(10) The corresponding address of MainAmp of channel 1

















72
















Gain1 int(10) The gain value of channel 1, now is not used







73




















Gain27 int(10) The gain value of channel 27, now is not

74

used






CPUs text ->Computer


BelongsToEMC text -> EMCSubSystem

6.51. table: ETC





PhysAddress smallint(5) Physical address

Enable varchar(10) Enable module


CAL int(10) CAL



6.52. table: EmulatedDataOut





75

OutputDelay int(10) Output delay

SamplingGap int(10) Sampling gap

FormattedOutput varchar(10) Boolean flag. Set to true when data have to be written to a file using the EventStorage library.

EventStorageConfiguration text get parameters to write data with event storage.

6.53. table:EmulatedHardwareTriggerIn

Internal generation of Hardware Triggers. Emulates CORBO, TCP or other real hardware triggers.






RequestType enum('HWTriggeredROSDataRequest', 'HWTriggeredRODEmulationRequest', 'HWTriggeredRemoteRequest')

Type of Request to be generated and queued by this Trigger

6.54. table: EmulatedReadoutModule






76




GetFragmentDelay int(10) Delay of get fragment

MessageDelay int(10) Message delay

ReleaseDelay int(10) Release delay

ReleaseGroupDelay int(10) Delay of release group

GetMissingFragment float Get missing fragment

DetEvType int(10) DetEvType

NumberOfStatusElements int(11) Number of status element

StatusBlockPosition int(10) Status block position

DataSize enum('FIXED', 'RANDOM') Data size

MCFileName text MC file name

6.55. table: EmulatedSequentialReadoutModule

Readout module that emulates sequential input.









6.56. table: EmulatedSingleFragmentReadoutModule

ReadoutModule for testing ROD emulation. Corresponding data channels create emulated hardware fragments via getNextFragment().


77








6.57. table: EmulatedTriggerIn





L2RequestFraction float L2 request fraction

L2RequestAll text L2 request ALL

EBRequestFraction float EB request fraction


InputDelay int(10) Input delay

ROIDistribution int(10) Description of the probability (%) of the distribution of RoIs over the various ROLs in a ROS. Sum should be 100."

6.58. table: EthSequentialReadoutModule







78



6.59. table: EventCastorStorage





EnableCastor varchar(10) Castor writing enable flag

BufferSize_kB int(10) Buffer size in kb for one rfio_write. Performance will be low if buffer_size less than 50KB

DirectoryToWrite text Directory in which the data will be written

MaxEventsPerFile int(10) Maximum number of events in an output file. The new file is open automatically by EventStorage

MaxMegaBytesPerFile int(10) Max size of an output file in MB. New file is open automatically byEventStorage

6.60. table: EventStorage





DisableWriting varchar(10) Writing disenable flag.

DirectoryToWrite text Directory in which the data will be written

MaxEventsPerFile int(10) Maximum number of events in an output file. The new file is open automatically by EventStorage."

MaxMegaBytesPerFile int(10) Max size of an output file in MB. New file is open automatically by EventStorage.

79

6.61. table: FCTL








6.62. table: FEMApplication










If the application dies after succesfull start-up, it could be restarted. Dies; means that the application exits.



StartAt enum('Boot', 'SOR', 'EOR',

The application is started at appropriate moment if the value is not

80

'Shutdown', 'UserDefined')

equal to UserDefined(SOR/EOR = Start/End of run).


















81




belongs_to text ->DCMulticastGroupLink to multicast groups this node belongs to.

Interfaces text ->InterfaceMapDescribes alternative interfaces for message passing

FEMConfiguration text ->FEMConfiguration

6.63. table: FEMConfiguration





Detector text Detector

NumberOfTrigger int(10) Number of trigger

NormalModeSelfL1 smallint(5) Normal mode self L1

ROS text ->ROS

NonDataPPCModule text PPCModule

NonPhysicsParams text NonPhysicsParams

6.64. table: FilarReadoutModule







82



RevisionNumber int(10) Revision number of FILAR

FastTestMode int(10) Allows to control whether event data should go to the output stage (for experts). Possible values: 0 - all events to output (default); 1 - no events to output; 2 - 1% of events to output

6.65. table: FpgaProgram





Name text Name





VersionID int(10) Version number reported by this FPGA program when loaded.

CadProject text Name of the CAD project used to create the FPGA program (can be checked in the binary file).

CheckString text Some other string which can (optionally) be checked in the binary file.

Checksum int(10) Expected checksum of the binary file.

ChipType text Type of FPGA chip into which this program may be loaded

FlashRamBlock int(10) Block within flash RAM to download this FPGA program.

SourceURL text URL for downloading new versions of the binary file

ProgramType text Function of this FPGA program

DeviceName text Name of FPGA device on the module for which this

83

FPGA program is intended.



Uses text ->SW_Repository A software object can use zero or many software repositories (here uses means that at least it needs shared libraries from them).

6.66. table: GATHERERApplication















84







HW_Object text ->HW_Object








GATHERERConfiguration text -> GATHERERConfigurationRelation to the GATHERER configuration.


6.67. table: GATHERERConfiguration




85


physicsAnalysisLibrary text Implementation of the Physics Library Framework to load.

MonObjectGroupConfNames text This is the list of MonObjectGroupConf names defined. Each of the names is associated with a MonObjectGroupConf object (UID).

6.68. table: HW_Object





Name text Name







6.69. table: HW_System





Name text Name





86


6.70. table: HardwareTriggerIn

Base class for hardware triggers. Generates RODEmulation requests or ROSRequests (unusual).








6.71. table: IOManager





Trace int(10) defines the verbosity

Package int(10) Defines what package shall be debugged

QueueSize int(10) Determines how many requests can be pending inside the IOM

QueueUnblockOffset int(10) Determines when the Request queue shall be unblocked (low mark).

NumberOfRequestHandlers int(10) Defines how many requests can be processed in parallel in a IOM

RequestTimeOut int(10) Maximum time a Request survives in the

87

Request queue.

MonitoringScalingFactor int(10) Monitoring scaling factor

Trigger text -> ReadoutTrigger

ReadoutOutput text ->ReadoutOutput

ReadoutModule text ->ReadoutModule

MemoryConfiguration text ->MemoryPool

NonPhysicsStorage text ->EventStorage

6.72. table: InputChannel





Id int(10) Identifier of the ROB. Unique across the system

ROLPhysicalAddress int(10) Address of the ROL


MemoryConfiguration text Links the ROB to a memory pool which is used to store events

BelongsTo text ->ReadoutModule


6.73. table: Interface

Field Type DescriptionsObj_id int(11) Auto increment, primary key



Name text Name





88



Label text Name of NetworkInterface Label to use for communication

6.74. table: InterfaceMap

Alternative interface to use for communication with Peer. If there is no mapping for a given peer class, the interface defaults to the hostname of the node as specified in Computer.





Peer enum('ROS', 'RoIB', 'L2SV', 'L2PU', 'DFM', 'SFI', 'SFO', 'EFPU', 'ALL')

Peer application class. The NetworkInterface with the given Label will be used for communication.


Protocol enum('default', 'udp', 'tcp', 'rawsock')

Override the global protocol value for this connection."

6.75. table: JarFile





Name text Name






89



6.76. table: L2DummySteering





resultSize int(10) Describes the L2 Dummy Result size to be used

step text Relates to the Steps to be run during the execution of this Dummy Steering

6.77. table:L2DummyStep





nROB int(10) The number of ROB that should be pulled during this step processing.

burnTime int(10) Time to burn during this steps execution

subDetector tinyint(3) The subDetector from which this step should retrieve data from. A value of zero means the whole detector

acceptance float The acceptance rate for this step

6.78. table: L2PUApplication

Describes a single L2PU

90





















91


















L2PUConfiguration text ->L2PUConfiguration

92

6.79. table: L2PUConfiguration

Describes a group of L2PUs





handlerTimeout int(10) data handler timeout in micro seconds

noWorkerThreads int(10) number of worker threads for this PU

DataRequestDestination enum('PC', 'ROBIN')

Indicates whether the L2PU should ask data to a ROS PC or directly to a ROBIN

maxOutstanding_ROS_requests int(10) The maximum number of requests that the L2PU can simultanously have outstanding to ROSses

RoI_retries int(10) The maximum number of times that the L2PU reasks a ROI

physicsAnalysisLibrary text The name of the shared library objects to be loaded, that contain the Physics Analysis Framework implementation to be used.

physicsAnalysisConfiguration text A string that defines the sole configuration parameter for the Physics Analysis Framework being used

robDataSize int(10) The number of words (1 word == 4 bytes) that goes in each RODFragment sent by the ROS emulator into the L2PU

appendL1Result varchar(10) The L2PU adds the L1Result ROB to the LVL2Result ROSFragment if true

93

6.80. table: L2SVApplication

Describes a single L2SV



















94



















95

L2SVConfiguration text ->L2SVConfiguration

6.81. table: L2SVConfiguration

Describes a group of L2SVs





l2puQueueSize int(11) Number of events allowed in L2PU queue

dfmThreshold int(11) Number of L2Decisions to group before sending to DFM

l1SourceType text Type of L1Source to use

loadBalanceType text Identifies the load balancing method

l2puTimeout int(11) Timeout (milliseconds) for L2PU to return a decision

eventMax int(11) Max number of of events in this run. If zero, run forever (until stop by RC)

eventDelay int(11) Sleep in milliseconds between each event.Should be frequency in Hz?

l2puDisableLimit int(10) Number of consecutive timeouts to disable a L2PU. Zero means that L2PUs are never disabled. The L2SV is informed via IS when a L2PU can be enabled

6.82. table: Layers

Class Layers describes cell num of all layer of the subdetector





EastWestSide enum('East', 'West') East or west side

CellNum smallint(5) Cells num with every layer

96

6.83. table: LinkInterface





Name text Name







Type enum('source', 'destination')

Hardware manufacture type.

6.84. table: MCC







LatencyToT0 int(10) Latency to T0


6.85. table: MDCCalibration



97







DACBegin smallint(5) Begin value of DAC

DACEnd smallint(5) End value of DAC

DACStep smallint(5) Step value of DAC

T0Begin smallint(5) Begin value of T0

T0End smallint(5) End value of T0

T0Step smallint(5) Step value of T0

MDCChooseRange text ->MDCChooseRange

6.86. table: MDCChooseRange





A0Max float Maximum value of a0

A0Min float Minimum value of a0





RMSMax float Maximum value of rms

RMSMin float Minimum value of rms

98

6.87. table: MDCPed








6.88. table: MDCSubSystem







TriggerLatencyRegister smallint(5) Trigger latency register

SampleWindowRegister int(10) Sample wimdow register

TimeHighThreshold int(10) High threshold of Time

TimeLowThreshold int(10) Low threshold of Time

TimeSampleWindowRegister int(10) Time sample window register

QThreshold int(10) Threshold of Q

TimeChannelEnable int(10) Whether enable the time channel

6.89. table: MDC_Inner



99












MQT text ->MQT

6.90. table: MDC_Outer














MQT text ->MQT

100

6.91. table: MDC_Step














MQT text ->MQT

6.92. table: MQT














101


































102






DAC int(10) Control status register



TimeTriggerLatencyRegister int(10) Time trigger lantency register




QTHitOption int(10) Q,T hit option



BelongsToMDC text ->MDCSubsystem

6.93. table: MROC





PhysAddress int(10) Physical address



6.94. table: MTI




103





6.95. table: MUONROC







TriggerRate int(10) Trigger rate

TriggerMode int(10) Trigger mode


6.96. table: MUONROMO







TriggerSource int(10) VME ROMO module count:1VME ROC module drive:2LEMO of VME ROMO module:3

DataSource int(10) Chain Control FPGA:1Chain simulator:2detector:3

DataFormat int(10) meta data:0compress data:1

104

Pattern int(10) Pattern

Threshold int(10) Threshold

Test int(10) Test

FECNumber int(10) FEC number

TriggerLatency int(10) Trigger latency


BelongsToMUON text ->MUONSubSystem

6.97. table: MUONSubSystem





Name text Name





TriggerSource int(10) VME ROMO module count:1VME ROC module drive:2LEMO of VME ROMO module:3

DataSource int(10) Chain Control FPGA:1Chain simulator:2detector:3

DataFormat int(10) meta data:0compress data:1

Pattern int(10) Pattern

Threshold int(10) Threshold

Test int(10) Test

FECNumber int(10) FEC number




105

Crates text ->Crate

Layers text ->Layer

6.98. table: MemoryPool





Type enum('MALLOC', 'CMEM', 'CMEM_BPA')

Type of memory to use.

NumberOfPages int(10) Number of pages in the pool.

PageSize int(10) Size of an individual memory page.

6.99. table: MessageLossEmulation

Allows to emulate the loss of several types of messages arriving to a ROS (clear, ROI and EB), in terms of percentage.





ClearLostPercent int(10) Percentage (0..100) of lost clear messages.

ROILostPercent int(10) Percentage (0..100) of lost ROI messages.

EBLostPercent int(10) Percentage (0..100) of lost EB messages.

6.100. table: Methods



ClassId int(11) Datafile id, ->Data.DataFileId

Name tinytext Object id

106

Language tinytext The language of the program used

Prototype text Program prototype

Body text Program body


6.101. table: Module

Class Module describes a generic module.It has a lot of subclasses.Field Type Descriptions

























107





























6.102. table: MonObjectGroupConf



108



MatchingChar text Name od the MonObjectGroupConf. Each object constains the configuration for a series of MonObjects selected by the MatchingChar.

ServerNames text These are the servers where the GATHERER will publish the info.

ClientProtocol enum('ONLINE', 'DIM')

Client protocol for the MonObjectGroupConf. The GATHERER receives info via any of these protocols (ONLINE, DIM).

ServerProtocol enum('ONLINE', 'DIM')

Server protocol for the MonObjectGroupConf. The GATHERER publishes info via any of these protocols (ONLINE, DIM).

InfoTreatment enum('sumUp', 'substitute')

What the GATHERER does with the info:sumUp - sum information substitute - replace old by new info

RetrievalMode enum('pull', 'waitInfo')

How the info is sent to the GATHERER:pull - push mode with some frequency waitInfo info sent after condition is met

BroadcastMode enum('request', 'condition')

How the GATHERER publishes the info: request - requested by client condition sent when condition is met

Frequency int(10) Frequency (time in seconds) at which the MonObjects in MonObjectGroupConf will update.

6.103. table: MonitoringApplication

This class is used for easy identification of monitoring applications. It is expected it will have direct attributes in future.







RestartParameters text Command line parameters to restart

109

application in case of application failure.


















110




6.104. table: MySQLConfiguration





Server text The address of MySQL server run

User text The user name log in the MySQL server

Passwd text The password of the user which is used to log in the MySQL server

6.105. table: Network




Name text Name

IPMask text IP mask

EndPoints text -> NetworkInterface

6.106. table: NetworkInterface





111

Name text Name







Label text Name of NetworkInterface label to use for communication

IPAddress text The hostname or dotted IP address for this interface.

MACAddress text The ethernet MAC address in AA:BB:CC:DD:EE:FF notation.

6.107. table: NonPhysicsParams





Enable varchar(10) Enable the non physics parameter

RootStorageConfiguration text RootStorage


MySQLConfiguration text ->MySQLConfiguration

MDCCalibration text ->MDCCalibration

EMCCalibration text ->EMCCalibration

TOFCalibration text ->TOFCalibration

MDCPed text ->MDCPed

EMCPed text ->EMCPed

TOFPed text ->TOFPed

EMCMonitor text ->EMCMonitor

TOFMonitor text ->TOFMonitor

112

6.108. table: NullTriggerIn






6.109. table: OHCApplication













StartAt enum('Boot', 'SOR', 'EOR', 'Shutdown',

The application is started at appropriate moment if the value is not equal to UserDefined (SOR/EOR =

113

'UserDefined') Start/End of run).


















114




OHCConfiguration text -> OHCConfiguration

6.110. table: OHCConfiguration





Histograms text ->OHCHistogram

6.111. table: OHCHistogram





Name text The string defines name of the OHCHistogram.

OHServer text The OH Server name which the histogram will be publish to

Provider text The Proivder name of the histogram

SubDetector text ->Detector

CheckingMethod text ->OHCMethod

CheckingCrates text ->Crate

6.112. table: OHCMethod



115



Custom Varchar(255) Custom histogram checking.

Hitmap enum('DeadChannel', 'Threshold', 'HugeChannel')

Hit map histogram checking.

Value enum('Mean', 'RMS', 'LowThreshol') Value map histogram checking.

RefHisto enum('Chi2', 'Kolmogorov') Reference Histogram Compare

6.113. table: OHFCell






LayerId smallint(5) Layer id

CellId smallint(5) Cell id

6.114. table: OHFCellSet





FirstCell text ->OHFCell, the number of first cell

LastCell text ->OHFCell, the number of last cell

6.115. table: OHFConfiguration



116



EnableFill varchar(10) Flag to enable filling all histogram

EventFillRatio int(10) The ration of event fill into histograms is 1/n

L1EventTypeMask Int(32) The mask for AND with L1 event type of the data will be filled.

EnablePublish varchar(10) Flag to enable publish all histogram

PublishDelayTime_s smallint(5) Delay time to publish high level histograms

MediumDelayRatio smallint(5) elay time ratio with PublishDelayTime_s to publish medium level histograms

LowDelayRatio smallint(5) Delay time ratio with PublishDelayTime_s to publish low level histograms

OHFHistograms text ->OHFHistogram

DefaultPublishConf text ->OHFPublishConf

6.116. table: OHFEFViarable





Name text Name

SubDetector enum('EF', 'MDC', 'TOF', 'EMC', 'MUC')

Sub detecotor of the viarable.

Index tinyint(3) The index of the viarable in the sub detector’s viarables.

DataType enum('Int', 'Float') The data type of the viarable

EventTypeMask int(10) The mask for OR with event type of the data will be filled.

6.117. table: OHFFillingConfiguration



117



RangeType enum('Whole', 'Each')

Describe whole the Layers and Cells will be filled in one histo or each Layer or Cell will be filled respective histos.

OHFFillingRange text ->OHFFillingRange

6.118. table: OHFFillingRange





OHFCells text ->OHFCell

OHFCellSets text ->OHFCellSet

OHFLayers text ->OHFLayer

OHFLayerSets text ->OHFLayerSet

MUCLayerSet text ->MUCLayerSet

6.119. table: OHFHistogram





Name text The string defines name of the OHFHistogram.

Title text Histogram title

EnableFill varchar(10) Enable flag for filling this histogram.

HistoType enum('Hit', 'Value', 'Other')

Type of histogram

TQType enum('T', 'Q', 'TandQ', 'QandT', 'Other')

TQ type of filling(contents depends on FillingType(Hit or Value))

118

OHFHistogramAxes text ->OHFHistogramAxes

SubDetector text ->Detector

OHFFillingConfiguration text ->OHFFillingConfiguration

OHFPublishConf text ->OHFPublishConf

6.120. table: OHFHistogramAxes





Axes_lable text Lables for axes.

Axes_type enum('NoAxis', 'FixedAxis', 'VariableAxis')

Types of different axes

Axes_cbins int(11) Bins counts for axes.

Axes_low double Low of Axes ranges (contents depends on axes types).

Axes_up double Up of Axes ranges (contents depends on axes types).

6.121. table: OHFHistogramInfo





Name text The string defines name of the OHFHistogram.

Title text Histogram title

OHFHistogramAxes text ->OHFHistogramAxes

6.122. table: OHFLayer


119





LayerId smallint(5) Layer id

6.123. table: OHFLayerSet





FirstLayer text ->OHFLayer, the first layer

LastLayer text ->OHFLayer, the last layer

6.124. table: OHFMUCLayerSet





PartitionID tinyint(3) The id of partition

GroupingType enum('Seg', 'Layer')

Indicate the histogram will be gourped by Seg or Layer (every the same layer of all Seg).

SegmentID tinyint(3) Segment id

LayerID tinyint(3) Layer id

6.125. table: OHFPublishConf




120


OHServer text The OH Server name which the histogram will be publish to

Publish_Level enum('High', 'Medium', 'Low', 'PublishAtEndRun', 'NoPublish')

The level of publish.

NumEntriestoPublish int(10) Histogram can be published when the number of new filled entries is more than this number.

6.126. table: OHGApplication















121



















122



OHGConfiguration text -> OHGConfiguration

6.127. table: OHGConfiguration





Histograms text ->OHGHistogram

DefaultPublishConf text ->OHFPublishConf

Providers text ->OHGProviders

OHFConfiguration text ->OHFConfiguration

6.128. table: OHGHistogram





LayerDivide varchar(10) Set the flag for dividing a whole hitmap histogram by layer.

ProfileHisto enum('None', 'PhiProfile', 'ZProfile', 'PhiandZProfile')

Rebin the histogram to pofile histogram by Phi or Z way.

OHFHistogram text ->OHFHistogram

PublishConf text ->OHFPublishConf

Providers text ->OHGProviders

6.129. table: OHGProviders


123




Providers text The OHG provider

6.130. table: OHSApplication

















124


















OHSConfiguration text ->OHSConfiguration

125

6.131. table: OHSConfiguration





DirectoryToWrite text The directory to write

6.132. table: OnlineSegment





Name text Name












PmgAgent text ->SW_Object Points to the software object describing process-manager-agent

126

program.

PartitionIndependentApplications text ->Application

6.133. table: PPCApplication

















InitTimeout int(10) Initialization timeout, i.e. maximum time for a process to go to state ready-to-communicate with others,

127

e.g. a server start up time.



















Interfaces text ->InterfaceMap

128

Describes alternative interfaces for message passing

PPCConfiguration text -> PPCConfiguration

6.134. table: PPCConfiguration





NumberOfTrigger int(10) Number of trigger

ROS text ->ROS

NonDataPPCModule text ->PPCModule

6.135. table: PPCModule







PPCId smallint(5) The id of PowerPC module

PowerPCPort smallint(5) The port of PowerPC module

PowerPC_IPAddress text The IP address of PowerPC module


6.136. table: PTApplication




129



















ShortTimeout int(11) Minimum time allowed to change a

130

state.












DFApplicationConfig text ->DFApplicationConfig


PTConfiguration text ->PTConfiguration Relation to the Processing Task configuration object

subFarm text ->EF_SubFarm The subfarm the PT belongs to

6.137. table: PTConfiguration

Configuration of a particular Processing Task




131


physicsAnalysisLibrary text Implementation of the physics analysis framework to load

physicsAnalysisConfiguration text Configuration string to pass to the implementation of the physics analysis framework

ptioLibrary text DLL implementing the event source

ptioConfiguration text Configuration string to pass to the implemetation of ptio interface

answerList text Kinds of answer from EFD.

6.138. table: Parameter





Description text Describes the purpose of the parameter.

6.139. table: Partition





Name text name

RepositoryRoot text The root of repository

IPCRef text Defines IPC init reference. By default, it is copied from the variable TDAQ_IPC_INIT_REF defined in the process environment and passed to environment of all applications of such partition.

DBPath text Defines locations of database repositories (i.e. OKS_DB_ROOT). By default, it is

132

copied from the variable TDAQ_DB_PATH defined in the process environment and passed to environment of all applications of such partition.

DBName text Defines database name, e.g. name of the OKS data file. By default, it is copied from the variable TDAQ_DB_DATA defined in the process environment and passed to environment of all applications of such partition.

DBTechnology enum('rdbconfig', 'oksconfig')

Defines config database technology implementation to be used by all processes running in given partition. Defines TDAQ_DB variable to be passed to all applications of the partition.

LogRoot text Defines root directory for log files.

WorkingDirectory text Defines directory, where a new process run by pmg will be started.

RunTypes text The type of run

EventNumberSource text A string to specify the name of the IS information used as event number.

Segments text -> Segment

DefaultHost text ->Computer, the default host to run the partition

OnlineInfrastructure text -> OnlineSegment , Defines online infrastructure segment.

DataFlowParameters text -> DataFlowParameters , A partition may have one data-flow parameters set.


Disabled text ->Component , Lists segments and resources, which are temporary disabled.


Parameters text -> Parameter

6.140. table: Platform


133




HW_Tag enum('i686-slc3', 'i686-rh73')

Set of all available hardware tags in the format: hardware platform-operating system;

6.141. table: PreloadedReadoutModule





ByteSwapping varchar(10) States if data coming into the device shall be swapped or not.




6.142. table: PseudoROSModule

Describes the parameters needed for a pseudo ros.









TriggerQueue enum('Trgin', 'Direct') Describes the way in which the trigger is activated.

134

6.143. table: PtDummySteering





resultSize int(10) Size of the ef output extension. It should be given in 32bin words.

burnTime int(10) Burn time in microseconds

acceptance float Acceptance of ef selection

TimeOutFrequency int(10) How often timeout occurs.

MinRemainder int(10) Which event will timeout.

6.144. table: RCD










RequestTimeOut int(10) Maximum time a Request survives in the Request queue.




135








The application is started at appropriate momentif the value is not equal to UserDefined(SOR/EOR = Start/End of run).









136





Id smallint(5) In ROD emulation, it’s the RCD module ID. It is included in the lower 16 bits of the source identifier of the ROD header.






Detector text ->Detector, Relationship to associate a ROS to a detector.

Handles text ->InputChannel








137

6.145. table: RM_Computer_Resource

The RM_Computer_Resource class is used to describe limits of ComputerParameters to be used.





Name text Name


MaxCopyPerPartition int(11) Maximum copy number per partition

MaxCopyTotal int(11) Maximum copy number




6.146. table: RM_HW_Resource





Name text Name





HardwareClass text The hardware class

DB_Path text Database path

6.147. table: RM_Resource

The Resource class is used to describe shared and exclusive resources used by the

138

processes: the name of the resource, the maximum numbers of copies per partition and per system (i.e. total), and documentation (help URL and comments). The dynamic part of a resource includes the list of processes that allocated this resource.An example of a resource could be a run-time license (for example we can start limited number of processes with GUI that use some commercial widget). A resource can describe some hardware resources (for example we can not have two concurrent processes that write on the same type recorder device). The use of resources can be connected with the architecture of the process (for example, we do not want to allow start simultaneously several GUI editors for the same data, if there is no concurrent update of graphical view or the creator of software objects knows that it must be started only once per system or per partition, etc.).





Name text Name





6.148. table: RM_SW_Resource





Name text Name





6.149. table: ROS


139




















140







Id smallint(5) Id of the ROS. It is included in the lower 16 bits of the source identifier of the ROS header.






RequestTimeOut int(10) Maximum time a Request survives in the Request queue.






141














6.150. table: ROSApplication

Describes a single ROS







ControlledByOnline varchar(10) When the value is true, it is assumed that the application is controlled by the Online SW. This requires pmg_agent to be started at boot time on host where the

142

application will be started.
















FullStatisticsInterval int(11) Defines at what time interval (in seconds) the controller shall request complete operational

143

statistics to its children.
















6.151. table: ROSE





144



















145


















ROSEConfiguration text ->ROSEConfiguration, Global ROSE configuration settings

146

6.152. table: ROSEConfiguration

Describes a group of ROSEs





robDataSize int(10) The data size (in multiples of 4 bytes) returned by a requested ROB (same for all ROBs in one ROS)

storeSize int(10) number of LVL2Results in the PROS internal store

runMode text Mode one of Internal, Preloaded or PROS

6.153. table: Rack





Name text Name







Nodes text ->Computer

Crates text ->Crate, the crates install in the rack

6.154. table: ReadoutApplication



147





6.155. table: ReadoutModule









6.156. table: ReadoutOutput



OID varchar(255)

Object id

6.157. table: ReadoutTrigger






148

6.158. table: Relationships



ClassId int(11) Datafile id, ->Data.DataFileId

Name tinytext Object id

RelClass tinytext Relation class

LowConstraint enum('Zero', 'One', 'Many') The constraint of the low end

HighConstraint enum('One', 'Many') The constraint of high end

ReferenceType enum('Weak (non Composite)', 'Dependent Exclusive', 'InDependent Exclusive', 'Dependent Shared', 'InDependent Shared')

Reference type


6.159. table: Resource






6.160. table: RoIBApplication






149


















ProbeInterval int(11) Defines at what interval (in seconds) a

150

controller shall probe its children.












RoIBConfiguration text ->RoIBConfiguration

6.161. table: RoIBConfiguration

Describes the RoI Builder.





roibTtype enum('TRG_RAM', 'TRG_ROD', 'TRG_TTC')

Method to trigger the RoIB

liveChannel smallint(5) Bit mask describing live input channels

eventrate smallint(5) integer setting the event rate

151

InputModuleSlots int(10) List of VME slots occupied by the Input Modules

OutputModuleSlots int(10) List of VME slots occupied by the Output Modules

ActiveInputChannels text List of input channels expected to receive data

ActiveOutputChannels text List of output channels on which assembled event fragments will be sent

EnableStandalone varchar(10) Flag to enable/disable standalone operation of the Input modules, i.e. capture data disregarding flow control from the Output modules

EnableFlowControl varchar(10) Flag to enable/disable flow control on the Output modules

MaxInputSkew int(10) Maximum time (microseconds) to allow between the first and last fragment received on the Input module

UsesTestFiles text List of test pattern files which will loaded into Diagnostic RAM of the Input modules

6.162. table: RobinDataChannel

ROL configuration.





Id int(10) Identifier of the ROB. Unique across the system

ROLPhysicalAddress int(10) Address of the ROL

TestSize int(10) The size of the generated fragments (in rolemu or roldatagen mode).

RolDataGen varchar(10) Enables the internal data generator (incompatible with rolemu).

DumpRolEnabled varchar(10) Enables dumping all data arriving on the ROL

152

to the serial PowerPC monitor.

DcNodeId int(10) Default just used to force serial number based calculation. Value = (sernum -1)*3 + channel# (e.g. sernum = 1 => 0,1,2))


MemoryConfiguration text Links the ROB to a memory pool which is used to store events

BelongsTo text ->ReadoutModule


ExpertParameters text ->RobinExpertParameter, ROL expert parameters, to be set ONLY by Robin experts.

6.163. table: RobinExpertParameter

Robin expert parameter, to be used ONLY by Robin experts.





Name text Name of the Robin expert parameter.

Value int(10) Value of the Robin expert parameter.

6.164. table: RobinReadoutModule

Robin board configuration.







153



RevisionNumber int(10) Revision number of the ROBIN firmware.

Timeout float Timeout for PCI based communication with ROBIN in seconds.

NumberOfOutstandingReq int(10) The max. number of entries in the message passing FIFO that the application may use.

MsgInputMemorySize int(10) The amount of DPM in the Robin reserved for message passing.

MiscSize int(10) The amount of PC RAM reserved for the reception of messages other than event fragments.

BaseIPAddress text The Robin IP address for UDP.

NetworkEnabled varchar(10) Enables or disables the Robin GbE port.

EbistEnabled varchar(10) Enables or disables the extended BIST.

UDPBasePort int(10) The Robin base UDP port.

DebugEnabled varchar(10) Enables Robin debugging. This creates a verbose output at the PowerPC serial monitor only if a debug firmware is loaded.



HasNetworkInterface text Describes the network interface of the ROBIN.

ExpertParameters text List of Robin expert parameters, to be used ONLY

154

by Robin experts.

6.165. table: RootStorage





DirectoryToWrite text Directory in which the data will be written.

MaxEventsPerFile int(10) Maximum number of events in an output file. The new file is open automatically by RootStorage.

MaxMegaBytesPerFile int(10) Max size of an output file in MB. New file is open automatically byRootStorage.

6.166. table: RunControlApplication











155


















InitializationDependsFrom text Defines processes to be started

156

before this one.






6.167. table: SFIApplication

Describes a single SFI















157



















158






SFIConfiguration text ->SFIConfiguration

6.168. table: SFIConfiguration

Describes a group of SFIs





DataRequestDestination enum('PC', 'ROBIN')

Indicates whether the SFI shall ask data to a ROS PC or directly to a ROBIN.

MaxAssignEvents int(10) Maximal number of events being build concurrently at one SFI before busy signal issued.

MaxOutputQueueSize int(10) Maximal number of completed events handled concurrently by the event handler of one SFI before busy signal issued.

TimeoutCycle_ms int(10) Time in milliseconds after which the credits of all events are decremented. Thus TimeoutCycle_ms * MaxReask = Timeout for the event assembling.

MaxReask int(10) Initial credit for each new event being deminished by timeout thread. If the credit is exhausted, the event has timed out.

TrafficShapingCredits int(10) SFI can do traffic shaping in pull mode. The traffic shaping parameter

159

defines the maximum number of outstanding data requests

SemaphoreConcentration int(10) Defines the significance of the Semaphore between the input thread and the request thread. The value of the attribute is the number of credits per semaphore switching

QueueConcentration int(10) Number of entries needed to wake up queue between the Input and the AssemblyThread

OutputStream enum('None', 'EFIO', 'DataFile')

Defines where complete events should go to.

ROS_DataSizeCookie_words int(10) Hardware ROB/ROS emulators send back data volume defined in a message header cookie.

MonitoringEnable varchar(10) Enables the Event Monitoring in the SFI

MonitoringSamplerQueueSize int(10) Number of event stored in the sampler queue for the monitoring

MonitoringRatio int(10) The ration of event put into the sampler queue for monitoring is 1/n

MonitoringDelay_ms int(10) delay between two events sent to the monitoring accumulator

EventStorageConfiguration text Get the parameters for the Event Storage

EFIOConfiguration text Reference to EFIOConfiguration

OHFConfiguration text ->OHFConfiguration

6.169. table: SFOApplication

Describes a single SFO






160


















ProbeInterval int(11) Defines at what interval (in seconds) a

161

controller shall probe its children.













SFOConfiguration text ->SFOConfiguration

6.170. table: SFOConfiguration

Describes a group of SFOs





NumberOfBuffers int(10) Number of internal buffers of the SFO.

BufferSize_kB int(10) Size of each SFO buffer.

EFIOEventRequestTimeout_us int(10) Timeout in microseconds for the event data being received after an

162

EventRequest sent to the EFD.

EventTypeMask int(10) this mask decides which types of the events will be stored.

EventStorageConfiguration text ->EventStorage, Get parameters for event storage.

EventCastorStorageConfiguration text ->EventCastorStorage, Get parameters for event Castor storage.

EFIOConfiguration text Reference to EFIOConfiguration

6.171. table: Slink

Describes an S-Link connection.





Name text Name







6.172. table: SLinkDataOut





SLinkOccurrence int(10) Slink occurrence

163

6.173. table: SLinkEthernet

S-Link connection emulation by means of an ethernet connection.





Name text Name







6.174. table: SLinkFILAR

Describes a FILAR based S-Link connection.





Name text Name







164

6.175. table: SLinkSSPCI

Describes an SSPCI based S-Link connection.





Name text Name







6.176. table: SSPCIReadoutModule









6.177. table: SW_Object

This class is used to desribe platform independent part of DAQ software component from logical point of view. The platform dependent part is described by ‘Program’ class. To start DAQ software component it is necessary to create an instance of ‘SW_Object’class.


165


FileId int(11) ->Data.DataFileId


Name text Name








6.178. table: SW_Repository





Name text The string defines name of the software repository.

InstallationPath text The string defines the software repository installation path.

ISInfoDescriptionFiles text List of files desribing IS information produced by the computer programs of given repository.

SW_Objects text ->SW_Object,A software repository contains at least one software object. A referenced software object shall point to the same software repository (i.e. a software object can't be shared by several repositories).

Tags text ->Tag

166

Uses text ->SW_RepositoryDesfines others sw repositories which are used by given one.This adds paths to bin and lib directoris of the repositoty programs.

6.179. table: Schemes

this table describe the information of schema file, include file time, file name, file path and the content of the file.


SchemaFileId int(11) Auto increment, primary key

FileTime datetime File time

FileName varchar(255) File name

FileLocation varchar(255) File path

FileText text File content

6.180. table: Script





Name text Name






Shell text Used shell



167



6.181. table: Segment





Name text Name












6.182. table: SpecificPackagesError



FileId int(11) Datafile id, -

168

>Data.DataFileId


Package_ID tinyint(3) Package id

DebugLevel enum('DEBUGLEVEL0', 'DEBUGLEVEL1', 'DEBUGLEVEL2', 'DEBUGLEVEL3')

Debug level

SeverityLevel enum('INFO', 'WARNING', 'RECOVERABLE', 'FATAL')

Severity level

6.183. table: TCLK







ClockSource int(10) Clock source


6.184. table: TCPDataOut

Output class for the IO Manager to send data through a TCP connection.





DestinationNode text Name or IP address of the destination node for event fragments

DestinationPort int(10) Destination port for the event fragments

SamplingGap int(10) Define the minimum gap between two sampled events. As a consequence, a maximum sampling ratio is defined.If the ThrowIfUnavailable parameter is true, sampled event can be skipped if there are no

169

resources available, else all the events are written as soon as possible.The default value (1) means that all the events are sent to the output, 0 means that no event is sent.

OutputDelay int(10) Delay the output

TCPBufferSize int(10) Size of the TCP internal buffer

ThrowIfUnavailable varchar(10) If the ThrowIfUnavailable parameter is true, sampled event can be skipped if no resources are vailable, else all the events are written as soon as possible, thus generating backpressure.

6.185. table: TCPTriggerIn

Trigger coming via TCP.








TriggerSourceIPAddress text Trigger source network address.

TriggerSourcePort int(10) Trigger source network port. Cannot be zero.

ConnectTimeout int(10) Timeout to connect to trigger server (in sec).

ClearDelay int(10) Introduce a delay

170

before sending a clear to the server (for debug).

6.186. table: TCPTriggerReadoutModule

Trigger server module for remote TCPTriggerIns.









ConnectTimeout int(10) Time to accept connections during configuration.

TriggerSourcePort int(10) Trigger source network port. Cannot be zero.

6.187. table: TFEE







BarrelEnd int(10) The relation position is Barrel or end

ChannelEnable int(10) Channel enable

TriggerEnable int(10) Trigger enable

RejectLaten int(10) Reject latency


171

TriggerSearchWinT int(10) Trigger search window of T

TriggerMatchWinT int(10) Trigger match window of T

TriggerSearchWinQT int(10) Trigger search window of QT

TriggerMatchWinQT int(10) Trigger match window of QT

HitCountPerEventT int(10) Hit count per event T

HitCountPerEventQT int(10) Hit count per event QT

HighThreshold int(10) High threshold

LowThreshold int(10) Low threshold

HighThresholdQT int(10) QT high threshold

LowThresholdQT int(10) QT low threshold

ConstVoltage int(10) Const voltage

SelfTestSignalAmp int(10) Self test signal amplitude

SerialNum int(10) Serial number


















BelongsToTOF text ->TOFSubsystem

172

6.188. table: TMON







BarrelEnd int(10) The relation position is Barrel or end
























173











LDPulseIntervalReg int(10) pulse interval of laser device

LDPulseNumReg int(10) Pulse number of laser device

MonitorL1LatencyReg int(10) Latency of monitor L1

LDPulseWidthReg int(10) Pulse width of laser device

MonitorL1PulseWidthReg int(10) Pulse width of monitor L1

L1DelayBitSelect int(10) Select the bit of L1 delay

LDSolenoid int(10) Laser device solenoid


BelongsToTOF text ->TOFSubsystem

6.189. table: TOFCalibration









DACBegin smallint(5) Begin value of DAC

174

DACEnd smallint(5) End value of DAC

DACStep smallint(5) Step value of DAC

TOFChooseRange text ->TOFChooseRange

6.190. table: TOFChooseRange





A0Max float The maximum value of a0

A0Min float The minimum value of a0





RMSMax float The maximum value of rms

RMSMin float The minimum value of rms

6.191. table: TOFMonitor






IntervalReg smallint(5) Interval time

PulseNum smallint(5) Pulse number

Solinoid smallint(5) solinoid

175

6.192. table: TOFPed








6.193. table: TOFSubSystem





Name text name





Enable varchar(10) Module enable

WorkMode int(10) Work mode








176













Crates text ->Crate

Layers text ->Layer

6.194. table: TROC








L1Latency int(10) L1 lantency

TestL1 int(10) Test L1

AutoL1Interval int(10) Interval of auto L1

SemiAutoL1Num int(10) Number of semi auto L1


177

6.195. table: Tag





HW_Tag enum('i686-slc3', 'i686-rh73') Hardware tag

SW_Tag enum('gcc32-opt', 'gcc32-dbg', 'gcc323-opt', 'gcc323-dbg', 'icc8-opt', 'icc8-dbg')

Software tag

6.196. table: Test





timeout int(11) timeout for test execution

parameters text Parameters used

host text host name where the test shall be executed

exec_mode enum('async', 'sync')

flag for concurrent or sequiential mode test execution

init_timeout int(11) PMG creation syncronization timeout

diagnosis text If test failed, this text will be presented to the user, as more detailed explanation of what is going wrong.

advice text If test failed, this text can be shown to the user. It contains advices on what can be done to repair the problem.

scope enum('any', 'absent', 'idle', 'run')

Defines the context in which the test execution is allowed.Can be:Any, absent, idle, run

178

complexity tinyint(3) Define levels of complexity of tests. If value is specified, only those tests will be executed. By default all tests are executed.

test_mask text The user can have access to a particular test (or group of tests) by setting the test_mask attribute. By default all tests have test_mask set to * meaning all tests are selected for execution.

interactive varchar(10) if set to true, the test is seen as an interactive test (or action). If set to false, is seen by the TestManager as a regular test.

is-a text ->ComputerProgram, Test implementation, needed to execute test

init-depends-from text ->Test, Used to specify the order in which tests must be started.

6.197. table: Test4Class












advice text If test failed, this text can be shown to the user. It contain advices on what can be done to repair the problem.


Defines the context in which the test execution is allowed.Can be:

179

Any, absent, idle, run



interactive varchar(10) If set to true, the test is seen as an interactive test (or action). If set to false, is seen by the TestManager as a regular test.

class_name text Class name from the databse. The test tests all objects of this class.



6.198. table: Test4Object












advice text If test failed, this text can be shown to the user. It contains advices on what can be done

180

to repair the problem.


Defines the context in which the test execution is allowed.Can be:Any, absent, idle, run



interactive varchar(10) if set to true, the test is seen as an interactive test (or action). If set to false, is seen by the TestManager as a regular test.

object_id text reference to some object in the database, that is tested by this test

override_test4class varchar(10) Both Test4Class and Test4Object can be defined for an object in database.If this attribute set ti true, Test4Object overrides Test4Class (this is default behaviour).Otherwise it is bappended to the list of tests defined for this object via Test4Class.



6.199. table: TrgTable





EventChannelEnableRegister int(10) Event channel enable

181

TrgTable_CH01_1 int(10) Parameter 1 of trigger channel 1

































182
































The value of "EventChannelEnableRegister" is 0Xhhhhhhhh. The low 16 bits corresponding 16 trigger channel. ‘1’ means the channel is enable, ‘0’ means the channel is disable. Bit00-bit15 corresponding to 16 trigger channels.

183

In "TrgTable_CH##_*", ## means the trigger channel number, * means the parameters 1-4 of trigger channel. Four parameters of one trigger channel is 32*4=128bit, two bits corresponding one trigger condition. Bit00－Bit01 is the trigger condition1, Bit02－Bit03 is the trigger condition 2, and so on.

6.200. table: Trg_CLKF





Name text Name

Position int(10) Position of module



6.201. table: Trg_EACC





Name text Module name

Position int(10) Position of module

SimRealSel int(10) simulation(“1”)/real(“0”) data selection

L1Sel int(10) Outer(“0”) / inner (“1”) L1 selection

FiberAlignLatency int(10) Fibre alignment latency set(“30” “3a” “40”)

FiberChannelSet int(10) Fibre Channel set

CSR1 int(10) CSR1 register Set#‘0’: a6: first board# ‘1’: 96: middle board# ‘2’: 9a: last board# ‘3’: aa: first&last board# ‘4’: 41: disable CBLT and MCST

184

CsumDepths int(10) CSUM data finding Depths set

CsumWins int(10) CSUM data saving Windows set

DataLenPerEvent int(10) Write data lengths/event# (lower 16bit) = [CsumWins + 1] * 20# higher 16bit: Events/CBLT

Data range: “1”, “2”, “3”, “4”, “5”, “6”, “7”, “8”, “9”, “a”…… “10”

# lower 16 bit: long words lengths/EventData range:

“1”:　 0x28“2”: 0x3c“4”: 0x64“8”: 0xb4“10”: 0xdc

“16”: 0x154

EtotDataSteps int(10) ETOT data Steps set# bit 8 is 0: the write data will be the real subtract data([6:0])# bit 8 is 1: we will shift the BLK energy data to right for 2 bit

EtotDataDepths int(10) ETOT data finding Depths

EtotDataWins int(10) write Etot data windows

VthBEtotH int(10) Threshold of BEtot_H

VthEEtotH int(10) Threshold of EEtot_H

VthEtotL int(10) Threshold of Etot_L

VthEtotM int(10) Threshold of Etot_M

VthBLZ int(10) Threshold of BL_Z

VthDiffB int(10) Threshold of Diff_B

VthDiffE int(10) Threshold of Diff_E

VthBalBLK int(10) Threshold of Bl_BLK

VthBalEEMC int(10) Threshold of Bl_EEMC

VthDiffMin int(10) Threshold of Diff_Min

ErrSet int(10) Set the Error register Status (RERR)

Debug varchar(10) Set to debug mode


Includes text ->Trg_EACC_Debug

185

6.202. table: Trg_EACC_Debug





Name text Name

Position int(10) Position

SimDataBlk1F int(10) Simulation data BLK1 First









SimDataBlkAF int(10) Simulation data BLKA First

SimDataBlkBF int(10) Simulation data BLKB First

SimDataBlkCF int(10) Simulation data BLKC First

SimDataBlkE1F int(10) Simulation data BLKE1 First

SimDataBlkE2F int(10) Simulation data BLKE2 First

SimDataBlkW1F int(10) Simulation data BLKW1 First

SimDataBlkW2F int(10) Simulation data BLKW2 First

SimDataBlk1N int(10) Simulation data BLK1 Next








186


SimDataBlkAN int(10) Simulation data BLKA Next

SimDataBlkBN int(10) Simulation data BLKB Next

SimDataBlkCN int(10) Simulation data BLKC Next

SimDataBlkE1N int(10) Simulation data BLKE1 Next

SimDataBlkE2N int(10) Simulation data BLKE2 Next

SimDataBlkW1N int(10) Simulation data BLKW1 Next

SimDataBlkW2N int(10) Simulation data BLKW2 Next

DepthCntClr int(10) Clear the nLrg1 to L1 count number

CsumDepthCal int(10) write calibration to CSUM depth

EtotDepthCal int(10) write calibration to ETOT depth

BelongsToEACC text ->Trg_EACC

6.203. table: Trg_FCTL





Name text Name

Position int(10) position

L1_config int(10) L1 config

Input_en1 int(10) Enable input signal;16bit 1=EN

Input_en2 int(10) Enable input signal;16bit 1=EN

Int_count8 int(10) int_count_threshold;8bit;

Int_timing16 int(10) int_timing_threshold;16bit;

Int_en int(10) Enable Counting and Timing int;8bit 1=EN

Sending_FRST int(10) Sending FRST


187

6.204. table: Trg_GTL






Position int(10) Module position

B0900DelayOfChannel01 int(10) The delay of channel01













188




















189

















B0900InternalL1Delay int(10) L1 internal delay

B1500UserOwnCSR int(10) user own CSR

B0700CbltMcstCSR1 int(10) CBLT&MCST CSR1

TrgWindows int(10) the Trigger

190

Window, Nevt CBLT register

B2300GlobalBufferNotFullFull int(10) the FULL, NOT NFULL and L1_bar selection register

B3100BarrelBhabhaPrescale int(10) the Barrel Bhabha Prescale register

B3100EndcapBhabhaPrescale int(10) the Endcap Bhabha Prescale register

B3100BackupRegister int(10) the backup register

B3100TimingOutputBitsMdcEmcTof int(10) the timing register output bits set register

B3100TofTimingORedBits int(10) the TOF timing ORed set register

B3100EmcTimingORedBits int(10) the EMC timing ORed set register

B3100MdcTimingORedBits int(10) the MDC timing ORed set register

B3100TimeOutL1InternalWidth int(10) the L1 width and time out register

B3100L1OutputWidthTimingSelectionMdcEmcTof int(10) the timing registers trigger conditions selection register

B0700L1ChkOutputControl int(10) the L1 and CHK control register : Disable L1*

B0900ChkDelayToL1 int(10) the delay of CHK relative to L1

B0800TrgLatencyInput int(10) the trigger latency of input conditions

B0800TrgLatencyAligned int(10) the trigger latency of aligned conditions

B0800TrgLatencyEvtType int(10) the trigger latency of EVT_TYPE buffer


191

TrgTable text ->TrgTable

6.205. table: Trg_LTKC







CBLTSet int(10) Set CBLT parameters and select clock0x8C844082, input clock, Middle Board

L1Select int(10) Select L1Default: 7, select input L1


6.206. table: Trg_MUDT







ControlState int(10) Set Control bits and check state bits. (All bits‘1’active)D0=FRST,D1=Force CRC ERR,D2=Hits RST, D3=Test,D4=RunD5=FIFO1 OverflowD6=FIFO2 OverflowD7=FIFO Write EN

Default: 0xfff0


192

6.207. table: Trg_MUTL







ChainSet int(10) set CBLT first/lasta2=first,82=mid,8a=last, aa=first&last,

00（或 55）= not in CBLT chain

ReadoutEventWindow int(10) CBLT readout windowonce readout event clk = 2*ReadoutEventWindow+1

Default: 0MAX: 0xa

ProgramFull int(10) Program FULL of CBLT FIFO1=10%,2=20%, …Default: 8

MAX: 0xa=100%

ProgramFullDisable int(10) Program FULL disable of CBLT FIFO1=10%,2=20%, …Default: 6MAX: 0xa=100%

L1Select int(10) L1 selectionDefault: 0

ReadoutModeSelect int(10) readout mode selection0: run mode,1: test mode

Default: 0

L1LatencyToHit int(10) Latency of L1 (unit:clock)，

193

0x9a: about 5.2us for TKF

TSFLatencyToHit int(10) Latency of TSF to hit (unit:clock)Default: 5MAX is f

TrackLatencyToHit int(10) Latency of TK to hit (unit:clock)Default: 9Max is f

FiberSyncLatencyToFRST int(10) Latency of Fiber sync to FRST (unit:clock)0x29: 3 meters0x40: 15 meters,Max is ff

FiberChannelSelect int(10) Channel set1 = enable the fiber channel0 = disable the fiber channelDefault: 0x3FF

DataSelect int(10) data select，0 = fiber data,1 = test dataDefault: 0


6.208. table: Trg_SAF







B1100DelayOfChannel01 int(10) Delay of channel01







194










B1500UserOwnCSR int(10) user Control Status Register

B0700CbltMcstCSR1 int(10) CBLT&MCST CSR1

B1100TrgLatencyInput int(10) the trigger latency of the non aligned trigger conditions

B0700TrgWindowWidthInput int(10) the trigger window of the non aligned trigger conditions

B1100TrgLatencyAligned int(10) the trigger latency of the aligned trigger conditions

B0700TrgWindowWidthAligned int(10) the trigger window of the aligned trigger conditions

B1100FullGlobalBuffer int(10) the FULL number of global buffers

B0900FullGlobalORedBuffer int(10) the FULL number of global ORed buffers

B1100FullNotGlobalBuffer int(10) the NOT FULL number of global buffers

B0900FullNotGlobalORedBuffer int(10) the NOT FULL number of global ORed buffers

B0400L1Selection int(10) the L1* selection register


6.209. table: Trg_STKC




195




CBLTSet int(10) Set CBLT parameters and select clock0x8C844082, input clock, Middle Board

L1Select int(10) Select L1Default: 7, select input L1


6.210. table: Trg_TCBA







WinLen int(10) Slide window lengths (5.5us, a0; 5us, 8c; 1.5us, 0; )

HL_Vth int(10) the Higher and Lower threshold Voltage

L1Sel int(10) The outer or inner L1 selection. “0”: outer “1”: inner

IntEn int(10) Enable or disable interrupt of TCBA board. “0”: disable “1”: enable

ChTimeC01 int(10) time compensated of channel01











196





















6.211. table: Trg_TDC







B1500SetTriggerWindowWidth01 int(10) Set trigger window width

B1500SetTriggerWindowOffset01 int(10) Set trigger window offset

B1500SetExtraSearchMargin01 int(10) Set Extra Search Margin

197

B1500SetRejectMargin01 int(10) Set Reject Margin

B1500SetEdgeDetectionConfiguration01 int(10) Set Edge Detection Configuration

B1500SetLeadingTrailingEdge01 int(10) Set LSB of Leading/Trailing Edge

B1500SetChannelDeadTimeOfHits01 int(10) Set Channel Dead Time Between Hits

B1500SetMaxNumberOfHitsPerEvent01 int(10) Set Maximum Number of Hits Per Event

B1500EnableTdcInternalErrorType01 int(10) Enable TDC Internal Error Type

B1500SetEffectiveSizeOfReadoutFifo01 int(10) Set Effective Size of Readout FIFO

B1500SetDllClock01 int(10) Set DLL Clock

B1500SetControlRegister int(10) Set Control Register

B1500SetInterruptLevel int(10) Set Interrupt Level Register

B1500SetInterruptVector int(10) Set Interrupt Vector

B1500SetGeoAddress int(10) Set GEO Address

B1500SetCbltMcstBaseAddress int(10) Set MCST/CBLT BASE Address

B1500SetCbltMcstCSR int(10) Set MCST/CBLT CSR

B1500SetAlmostFull int(10) Set Almost Full Register

B1500SetOutProgControl int(10) Set OUT_PROG Control Register


6.212. table: Trg_TFCF








198

V_Err_T int(10) Value of timing err

V_Err_C int(10) Value of count err

Per_ERR_12 int(10) Mask of err

Per_ERR_34 int(10) Mask of err

CO_IR int(10) open err int.

IOPR int(10) I/O permission, Enable

ENBL int(10) event number of each CBLT


6.213. table: Trg_TKF







ChainSet int(10) set CBLT first/lasta2=first,82=mid,8a=last, aa=first&last,00= not in CBLT chain

FiberChannelSelect int(10) Fiber Channel set1 = enable the fiber channel0 = disable the fiber channelDefault: 0xFFFF for ITKF, 0x3FF for TKF


6.214. table: Trg_TKFGeneral




199




ReadoutEventWindow int(10) CBLT readout windowonce readout event clk = 2*ReadoutEventWindow+1Default: 0MAX: 0xa

ProgramFull int(10) Program FULL of CBLT FIFO1=10%,2=20%,…Default: 8MAX: 0xa=100%

ProgramFullDisable int(10) Program FULL disable of CBLT FIFO1=10%,2=20%, …Default: 6MAX: 0xa=100%

L1Select int(10) L1 selectionDefault: 0

ReadoutModeSelect int(10) readout mode selection0: run mode,1: test modeDefault: 0

L1LatencyToHit int(10) Latency of L1 (unit:clock)，0x9a: about 5.2us

TSFLatencyToHit int(10) Latency of TSF to hit (unit:clock)Default: 5MAX is f

TrackLatencyToHit int(10) Latency of TK to hit (unit:clock)Default: 9Max is f

FiberSyncLatencyToFRST int(10) Latency of Fiber sync to FRST (unit:clock)0x29: 3 meters0x40: 15 meters,Max is ff

DataSelect int(10) data select，0 = fiber data,1 = test dataDefault: 0


200

6.215. table: Trg_TOFT







WorkMode int(10) Select the work mode of pretreatment FPGA and dispose FPGA

FiberChannelShield int(10) Fiber channel shield

ControlParameter int(10) Base control parameter

DisposeParameter int(10) Dispose parameter


CRandCSR int(10) Control register and control status register

InitialValueCH01 int(10) Initial value of channel01


















201















6.216. table: Trg_TROC








6.217. table: Users


id int(11) User id

name varchar(50) User name

passwd varchar(50) User password

202

6.218. table: Variable






Name text Name of variable

Value text Value of variable

6.219. table: VariableSet






Contains text ->Variable

6.220. table: ptioEfd

Configuration of the ptio implementation getting event from efd





socketName text Name of the socket to communicate with the EFD

6.221. table: ptioFile

Configuration of the ptio implementation getting event from data files


203




fileNames text List of data files

loop varchar(10) Infinite loop

6.222. table: ptioMon

Configuration of the ptio implementation getting event from online monitoring service emon





monKeys text List of monitoring Keys

monValues text List of monitoring Values

monBufSize int(10) Buffer Size

detType int(10) detector type

monL1type int(10) L1 trigger type

monL2type int(10) L2 trigger info

StatWord int(10) status word

async varchar(10) sync 0 async 1

204

7. database: hwconfig

7.1. table: Bcode

The information of crate and module of Barrel EMC


Id int(11) Id, primary key

Layer char(2) Layer code in EMC detector（01-44）Circle char(3) Circle code in EMC detector（001-120）Block char(1) Block of crystal belongs to in EMC

detector（east/west，E/W）

205

Rack char(1) Rack code of EMC electronics（1，2，3）Crate char(1) Crate code of EMC electronics（0，1，2）Module char(2) Module number of EMC electronics（000-14）Channel char(2) Channel number of EMC electronics（00-32）Ccode char(8) Crate code in DAQ configuration（EMC_XX_Y）Mcode char(11) Module code in DAQ configuration（EQM_XX_Y_ZZ）Chcode char(6) Channel code in DAQ configuration

BinChcode char(16) Binary value of channel code in DAQ configuration

PPCId int(11) Id of Powerpc

7.2. table: Ecode

The information of crate and module of East Endcap EMC




detector（east/west，E/W）Rack char(1) Rack code of EMC electronics（1，2，3）Crate char(1) Crate code of EMC electronics（0，1，2）Module char(2) Module number of EMC electronics（000-14）Channel char(2) Channel number of EMC electronics（00-32）Ccode char(8) Crate code in DAQ configuration（EMC_XX_Y）Mcode char(11) Module code in DAQ configuration（EQM_XX_Y_ZZ）Chcode char(6) Channel code in DAQ configuration



7.3. table: MainAmpToQ

The corresponding table between MainAmplifier and Q module of EMC.


206

Id int(11) Id

Block char(1) block

Rack char(1) rack

MainAmpCode char(5) Code of main amplifier

MainAmpGeo char(2) Geographical address of main amplifier

VMECrate char(1) Code of VME crate

EQM char(2) Module number of EQM

Outlet char(1) outlet

VMECratecode char(8) Code of VME crate in DAQ configuration

EQMcode char(11) Module code of EQM in DAQ configuration

7.4. table: TFEEConfig

The information of TFEE module of TOF.


id int(11) Id

BarrelOrEndcap char(1) Barrel or endcap

Layer char(1) Layer

EastOrWestEnd char(1) East or west end

Scintillator int(11) Scintillator number

Floor int(11) Floor number of electronical flat

Module int(11) Module number

Channel int(11) Channel number

Ccode char(8) Code of crate in DAQ configuration

Mcode char(9) Code of module in DAQ configuration

Chcode int(11) Code of channel in DAQ configuration

PPCId int(11) Id of PowerPC

7.5. table: Wcode

The information of crate and module of West Endcap EMC.



207


detector（east/west，E/W）Rack char(1) Rack code of EMC electronics（1，2，3）Crate char(1) Crate code of EMC electronics（0，1，2）Module char(2) Module number of EMC electronics（000-14）Channel char(2) Channel number of EMC electronics（00-32）Ccode char(8) Crate code in DAQ configuration（EMC_XX_Y）Mcode char(11) Module code in DAQ configuration（EQM_XX_Y_ZZ）Chcode char(6) Channel code in DAQ configuration



7.6. table: mdcinfo

The information of crate and module of MDC.


id int(11) Id

Layer int(11) Layer number

Thread int(11) Thread number

Crate char(6) Crate number

Module int(11) Module number

Cell int(11) Cell number in module

Channel int(11) Channel number

Ccode char(7) Code of crate in DAQ configuration

Mcode char(11) Code of module in DAQ configuration

Chcode int(11) Code of channel in DAQ configuration

PPCId int(11) Id of PowerPC

208

8. database: part_trg1234pt (information of dataflow)

This database shows the dataflow information of DAQ system. The relationships is showed in below figure.

209

8.1. table: DFM_1



210

One ROS has eight objectswhich is list in the dashed range.

time datetime Time


last GID int(11) Last GID. DbgLvl=1

last L1ID int(11) Last L1ID. DbgLvl=1

Number of assigned events int(11) Number of AssignedEvents

Number of ignored events int(11) Number of ignored Events

Number of EoE int(11) Number of EoE received

Number of cleared events int(11) Number of events cleared from ROSes

Number of reasked events int(11) Number of Reasked Events. DbgLvl=1

Number of timeout events int(11) Number of Timeout Events. DbgLvl=1

Number of unknown L1ID int(11) Number of unknown L1ID. DbgLvl=1

Number of SFI busy int(11) Number of SFI busy

Number of SFI non busy int(11) Number of SFI non busy

Number of flow control messages sent int(11) How many times the DFM has send XOFF or XON to the L2SV

Size of Assign Queue int(11) Size of Assign Queue. DbgLvl=1

Busy messages of already busy SFIs int(11) Busy messages of already busy SFIs. DbgLvl=1

Non busy messages of not busy SFIs int(11) Non busy messages of not busy SFIs. DbgLvl=1

Number of SFI been reset int(11) Number of SFI that have been reset. DbgLvl=1

Busy/Non Busy messages of Unknown SFI int(11) Busy/Non Busy messages of Unknown SFI

Rate of Assigned double Current rate of events assigned to SFIs (Hz). DbgLvl=1

Rate of EoE double Current rate of EoE messages from SFIs (Hz). DbgLvl=1

Rate of Clears double Current rate of clears sent to ROSes (Hz)

averaging time double Sampling time for calculation

211

of the current rates (s). DbgLvl=1

8.2. table: L2SV_1



time datetime Time


Identity varchar(20) Identity of this node

errors bigint(20) Number of errors

LVL1_events bigint(20) Number of LVL1 events

LVL2_events bigint(20) Number of LVL2 events

AcceptedEvents bigint(20) Number of accepted events

RejectedEvents bigint(20) Number of rejected events

ForcedAccepts bigint(20) Number of forced accepts

Throughput double Throughput in Hz

8.3. table: OnlineLum



time datetime Time


CalTime bigint(20) The value is set min-time for luminosity calculation.(const)

NumEvent bigint(20) The value is the number of all events(n) in this run

NumCorBEE bigint(20) The value is the corrected number of e+ e- events in this run

NumCorEEE bigint(20) The value is the corrected number of e+ e- events in this run.

NumCorUU bigint(20) The value is the corrected number of dimuon events in this run

NumCorGG bigint(20) The value is the corrected number of diphoton

212

events in this run

NumCorHadron bigint(20) The value is the corrected number of hadronic events in this run.

SNR float The value is the ratio between signal and noise

EventRate float The value is the number of event rate

EventRateCorBEE float corrected event rate for barrel e+e-.

EventRateCorEEE float corrected event rate for endcap e+e-.

EventRateCorUU float The value is the corrected number of dimuon event rate。

EventRateCorGG float The value is the corrected number of diphoton event rate。

EventRateCorHadron float The value is the corrected number of hadronic event rate.

LumEndcapEE float The luminosity(10^33cm^-2s^-1) is calculated by the number of Endcap e+ e- events

LumBEE float The luminosity(10^33cm^-2s^-1) is calculated by the number of e+ e- events。

LumEEE float The luminosity(10^33cm^-2s^-1) is calculated by the number of e+ e- events。

LumUU float The luminosity(value(10^33cm^-2s^-1) is calculated by the number of dimuon events。

LumGG float The luminosity(value(10^33cm^-2s^-1) is calculated by the number of diphoton events。

LumAvg float The luminosity(value(10^33cm^-2s^-1) is calculated by the number of three events。

XSecbyEndcapEE float The cross section(nb) of hadron is calculated by LumEndcapEE。

XSecbyBEE float The cross section(nb) of hadron is calculated by LumEE。

XSecbyEEE float The cross section(nb) of hadron is calculated by LumEE。

XSecbyUU float The cross section(nb) of hadron is calculated by LumUU。

XSecbyGG float The cross section(nb) of hadron is calculated by LumGG。

XSecbyAvg float The cross section(nb) of hadron is calculated by LumAvg。

213

IntLumEndcapEE float The integral luminosity(nb^-1) is calculated by the number of Endcap e+ e- events。

IntLumBEE float The integral luminosity(nb^-1) is calculated by the number of e+ e- events。

IntLumEEE float The integral luminosity(nb^-1) is calculated by the number of e+ e- events.

IntLumUU float The integral luminosity(value(nb^-1) is calculated by the number of dimuon events。

IntLumGG float The integral luminosity(value(nb^-1) is calculated by the number of diphoton events。

IntLumAvg float The integral luminosity(value(nb^-1) is calculated by the number of three events。

8.4. table: ROS_ROS_n

These tables record the information of readout system. One or two ROS servered for one detector subsystem. There are 11 ROS in total.



time datetime Time


requestsQueued int(11) Number of requests queued DbgLvl=1

requestsDequeued int(11) Sum of all treated requests

requestRateHz int(11) Request rate in hertz DbgLvl=1

popQueueEmptyPercent int(11) Percentage of time that popping on the queue resulted empty DbgLvl=1

pushQueueEmptyPercent int(11) Percentage of time that pushing on the queue resulted empty DbgLvl=1

deltaTimeMs int(11) Elapsed time in miliseconds DbgLvl=1

8.5. table: ROS_ROS_n_Expert_Core



time datetime Time

214


N Q elements int(11) Number of queue element

deltaTimeMs int(11) Work time of request queue in the run.(ms)

popQueueEmptyPercent int(11) Percent of pop queue empty

popQueueEmptySum int(11) Sum of pop queue empty

popQueueThresholdSum int(11) Sum of pop queue threshold

pushQueueEmptyPercent int(11) Percent of push queue empty

pushQueueEmptySum int(11) Sum of push queue empty

pushQueueFullSum int(11) Sum of push queue full

requestRateHz int(11) Rate of request (Hz)

requestsDequeued int(11) Number of request processed

requestsHandled1 int(11) Number of request processed by request handler1



requestsQueued int(11) Total number of request queue processed

requestsRequeued int(11) Number of repeated request queue

requestsRequeued1 int(11) Number of repeated request processed by request handler1



requestsTimedOut int(11) Time out of process request

8.6. table: ROS_ROS_n_Expert_DataChannels



time datetime Time


channelId int(11) ROB_Id

FreePages int(11) Number of free page

215

Fragments int(11) Fragments received

8.7. table: ROS_ROS_n_Expert_DataOut



time datetime Time


TotalBytesSent bigint(20) Total bytes have been sent

TotalNumberOfSentPackages bigint(20) Total number of sent package

8.8. table: ROS_ROS_n_Expert_InterruptCatcher



time datetime Time


N Interrupt Vectors int(11) Number of interrupt vector

N Interrupt Waits int(11) Number of interrupt wait

8.9. table: ROS_ROS_n_Expert_ReadoutModule



time datetime Time


Number of data channels int(11) Number of data channels administrated

8.10. table: ROS_ROS_n_Expert_SequentialInputHandler


216


time datetime Time


N fragments input int(11) Number of data fragment received

N yields int(11) Number of yield CPU

8.11. table: ROS_ROS_n_Expert_TriggerIn



time datetime Time


BadRequests int(11) Number of bad request

TotalInputSize int(11) Buffer size used to process request.

TotalRequestsProcessed int(11) Total number of process request

deltaTimeMs int(11) The work time of TriggerIn in the run

ebRequestsQueued int(11) Total number of event build request

l2RequestsQueued int(11) Total number of L2 request

level1RateHz int(11) Event rate of L1(Hz)

numberOfLevel1 int(11) Number of processed L1

releaseRequestsQueued int(11) Number of request queue released

8.12. table: ROS_ROS_n_Expert_UserActionScheduler



time datetime Time


N Scheduler Actions int(11) Number of scheduler actions

217

8.13. table: SFI_n

These tables record the information of Event Builder. There are 30 SFI in total.



time datetime Time


SizeOfITA int(11) Size Of Queue InputToAssembly

SizeOfEFIOServer int(11) Size Of EFIOServer

SizeOfATEH int(11) Size Of Queue AssemblyToEventHandler

EventsAssembled int(11) Number of assembled events

AssembledBufferWaterLevel int(11) Assembled Buffer Water Level

CompletedBufferWaterLevel double Completed Buffer Water Level

EventsAssigned double Number of assigned events by the DFM (pull only).

EventsBuilt int(11) Number of events built

EventsIncompletelyBuilt int(11) Number of events built with missing ROS fragments. DbgLvl=1

EventsDeleted int(11) Number of events deleted. DbgLvl=1

ActualEoERate double Actual End-of-Event rate

CumulatedEoERate int(11) Accumulated End of event rate. DbgLvl=1

NumBusyCount int(11) Number of Busy messages DbgLvl=1

NumNonBusyMessages int(11) Number of NonBusy messages DbgLvl=1

ConsecutiveBusyCount int(11) Consecutive busy count

NumRequests double Number of requested fragments DbgLvl=1

ActualRequestRate double Rate of requests sent to the ROSs DbgLvl=1

NumReasks double Number of reasked fragments DbgLvl=1

NumTimeouts double Number of Timeouts DbgLvl=1

NumFragments double Number of Event Fragments received DbgLvl=1

NumFragmentsNotInserted int(11) Number of Event Fragments that could not be inserted (duplication) DbgLvl=1

Payload int(11) Total Payload received (MB) DbgLvl=1

218

ActualPayloadRate double Actual payload rate (MB/s) DbgLvl=1

CumulatedPayloadRate double Accumulated payload rate (MB/s) DbgLvl=1

FragmentPayload double Average Payload per fragment (Bytes) DbgLvl=1

EventPayload double Average Payload per event (kB) DbgLvl=1

EventsCheckedForMonitoring int(11) Events retrieved from Sampler queue and checked for Monitoring criteria

MonitoredEventCount int(11) Events Given to Monitoring Tasks

ActualMonitoredEventRate double Actual Event Rate to Monitoring Tasks

IdealMonitoredEventRate double Ideal Event Rate to Monitoring Tasks

WaitTimeForSampledEvents double Total Wait Time (ms) to retrieve queue events for Sampling

8.14. table: SFO_n

These tables records the information of SubFarmOutput. There are one or two SFO.



time datetime Time


EventsReceived int(11) Number of events received from all EFDs

EventsSaved int(11) Number of events saved to disk

EventsSavedCastor bigint(20) Number of events saved to Castor

DataVolumeReceived double Data volume received from all EFDs (MB)

DataVolumeSaved double Data volume saved to disk (MB)

DataVolumeSavedCastor bigint(20) Data volume saved to Castor (MB).

CurrentEventReceivedRate double Current rate of received events (events/s). DbgLvl=1

CurrentDataReceivedRate double Current rate of received data (MB/s). DbgLvl=1

SamplingTime double Sampling time for current rates (s). DbgLvl=1

219

220

Documents

BESⅢ DAQ数据库bes3db.ihep.ac.cn/main/data-dict/online.doc · Web viewphysicsAnalysisConfiguration text A string that defines the sole configuration parameter for the Physics