Bioreactor Pds

7/28/2019 Bioreactor Pds

1/3

CHEMIPHASE LTDUnit 2 Ringtail Road, Burscough Industrial Estate,

Burscough, Lancashire, L40 8JY, UK(Tel) 08456 432900 (Fax) 08456432900

www.chemiphase.co.uk www.chemiphase.com Email : [email protected]

Technical Data Sheet

BIOREACTOR

Biological Odour & GreaseTreatment

DESCRIPTION

The Chemiphase Bioreactor is a bacteria growing module which provides all of the necessarygrowing conditions for substantially enhanced bacterial growth. By maximising all of theconditions for bacterial growth we can treat waste streams with a wide range of biologicaltreatments for various problems such as fat & grease, hydrogen sulphide. Using bacteriastreams to treat these potential issues we are able to offer much more cost efficient treatmentprogrammes that are just as effective as common chemical treatments yet dont have as manypotential environmental concerns as their chemical rivals. Because of the nature of bacteriathey will continually generate fresh bacteria allowing them to treat a much larger volume ofmaterial, it is becuase of this re-generation that makes the bioreactor system much more costefficient.

DESCRIPTION OF THE CHEMIPHASE BIOREACTOR

The bioreactor is a dosing station that is situated on site at a point that will allow maximumcoverage and efficiency. After an initial dosing period, the bioreactor will intermittently dose a

measured amount of Biosure product directly to the waste water, ensuring a sustainedbacterial treatment. This dosing is frequently monitored and adjusted to not only optimize thebacterial impact, but in order to achieve the highest level of cost efficiency.

The Biosure range is a specially formulated, select microbial product designed to control andsuppress the problems associated with municipal, oilfield and industrial biological waste watertreatments. The unique formulations are carefully engineered to tackle the most common ofissues


2/3





BIOREACTOR


CHEMIPHASE BIOREACTOR PRODUCT GUIDES

Below is a brief breakdown of the Biosure product range and a description of the issues theyhave been formulated to address, with the typical application areas.The Biosure products have been specifically engineered and refined to meet the needs of thewaste water treatment industry. Through our extensive experience and working partnerships

with numerous waste water treatment plants, our in house and onsite testing and constantproduct development we are confident the Biosure range offers the ultimate in microbialtreatment plans.

PRODUCT DESCRIPTION APPLICATION

CP- 1050 Control Of Filamentous Bulking All Industries

CP- 1055 Biomass Start Up Municipal

CP- 1060 Degradation of Fats and Greases of AnimalOrigin

Dairy and Food Processing

CP- 1065 Degradation of Fats and Greases of Vegetable

Origin

Vegetable Oil Processing

CP- 1070 Degradation of High Strength ProteinaceousWastes

Meat Processing/ Faculative Lagoons

CP- 1075 Degradation of Detergent Detergents

CP- 1080 Degradation of Starches and Cellulosic Materials Pulp and Paper/ vegetable Processing

CP- 1085 Degradation of Solvents, Amines and Phenolics Chemical Industry

CP- 1090 Degradation of Aliphatic and AromaticHydrocarbons

Soil Remediation

CP- 1095 Degradation of Petroleum Hydrocarbons Oil Refineries

CP- 1100 Oxidation of H2S All Industries

CP- 1115 Degradation of Halogenated Aromatics, Removalof AOX

Chemical/Pharmaceutical/Pulp and Paper

CP- 1120 Nitrification- Oxidation of Ammonia All Industries

CP- 1130 Nitrification- Oxidation of Nitrate All Industries

Algae Clear Powder Degradation of Organic Material Lakes and Ponds

Algae Clear F Powder Degradation of Organic Material Lakes and Ponds

Grease Eater Powder Degradation of Fat and Grease Food Industries

HOW THE BIOREACTOR TECHNOLOGY WORKS

The Biosure products are bacterial cultures which use their free enzymes to effectively digest

organic waste and odours. Bacteria are unicellular micro-organisms that are presentthroughout the environment. All bacteria must eat to stay alive. The bacteria produce enzymes

that break down organic waste into a liquid form that can be easily absorbed by the bacteria.The bacteria convert the liquid into energy (for use within the bacteria) CO2 and H2O. The CO2and H2O are released as harmless by products into the environment.The energy is used by the bacteria for reproduction. Bacteria reproduce by subdividing,forming two bacteria. Time frames of this sub division vary but will occur approximately every

twenty minutes. With this in mind it is easy to see how an introduced bacterial culture canquickly begin to work at degrading organic matter. Each product in the Biosure range containa carefully selected blend of bacterial strains. These bacteria have been selected, adapted ,grown in pure culture, harvested and preserved before being blended into the final formulation.In addition to the bacteria the products also contain amylases, cellulases and lipases as freeenzymes, which are important in the initial growth phase of the bacteria. The bacterial makeup of each of the Biosure product varies in accordance to its primary function (ie what itsprimary organic feed stock will be). This is how we are able to offer a variety of bacterialtreatment packages to combat varying waste issues.


3/3





BIOREACTOR


THE CHEMIPHASE BIOREACTOR PROGRAMME

Chemiphase have moved from the concept of treating individual areas to the present mode

of operation, namely the use of bioreactors. The bioreactor feeds the incoming effluentwater with an effective inoculation of the Biosure bacterial product. The ChemiphaseBiosure Bioreactor is installed at a convenient point that ensures as full a coverage as ispossible. From this point the bioreactor continually doses the waste water system toencourage the bacterial coverage.The bacteria gains a foot hold within the ecosystem quickly, the continual dosing is

necessary due to the flowing nature of the waste water system .

THE CHEMIPHASE BIOREACTOR SERVICE PROGRAMME CONSISTS OF THE

FOLLOWING;

Supply and maintenance of the Chemiphase Biosure Bioreactor and all ancillaryequipment.

Supply of all Chemiphase Biosure Bioreactor biological cultures. Supply of nutrient package. Semi-monthly Chemiphase Biosure Bioreactor service to check the health of the

biomass and carry out other essential checks. (See parameters set out below). Provide an emergency call out system to ensure the Chemiphase Biosure Bioreactor

Programme is not interrupted unduly. Quote installation costs and then a monthly price for each site. These prices will

include the purchase of the equipment, the supply and maintenance of the bio-culture and the supply of nutrients. The servicing and maintenance of theequipment will be free of charge whilst the bio-culture and nutrients are purchased.

THE CHEMIPHASE BIOREACTOR SERVICE PROGRAMME WILL INCLUDE THEFOLLOWING HEALTH CHECKS ;

pH Dissolved oxygen NH4 ions Phosphate ions Glucose / sugar levels D O U R - Respiration rate of biomass Sulphides Suspended solids

DISCLAIMER OF LIABILITY

The information and all further technical advice is based on our present knowledge and

experience. However, they imply no liability or other legal responsibility on our part,including with regards to existing third party intellectual property rights, especially patentrights. In particular, no warranty, whether express or implied of guarantee of productproperties is intended or implied. We reserve the right to make any changes according totechnological progress or further developments. The customer is not released from theobligation to conduct careful inspection and testing of incoming goods. Performance of theproduct described herein should be verified by testing, which should be carried out byqualified experts in the sole responsibility of the customer.

Documents

Bioreactor Pds