8/11/2019 Brochure Ahts 2013 - Email
2/5
QUALITY
The equipme nt delivered by Hu isman is of ten the criti cal
main
equipment onboard and its reliability is of utmost
importance
to our clients. Delivering high quality products has
therefore
been a key company value since the establishment of our
company. As a result, our equipment is internationally known
for its high quality and reliability during operations. It
meets
the most stringent performance criteria and is certified by
recognised authorities such as Lloyds, DNV, API, TV etc.
SERVICE
A dedicated worl dwide operatin g servic e team of skille d
professionals is on stand-by to provide advice, training and
service support before, during and after installation and
delivery. Our service network is managed from Huisman
in The Netherlands but our local service offices in
Rio de Janeiro (Brazil), Houston (USA) and Singapore are
on stand-by to provide all service support on location as
well as by remote access.
TRAINING
For training purposes, Huisman Global Services founded the
Huisman Academy in 2011. This Schiedam-based training
facility is used to support Huisman clients in operating and
maintaining the equipment in the most effective and safe
way.
SAFETY, HEALTH AND ENVIRONMENT
We set a high value on being a responsible company and
therefore always seriously consider the safety,
environmental
and health impact of our operations on our stakeholders.
RELIABLE PARTNER
Due to our strong belief in partnerships with our clients,
our commitment to finding new technical solutions and our
dedication to delivering them as turnkey projects, we are
internationally valued as a solid, reliable partner. Our
extensive
track record and the large number of long-lasting client
relationships prove that we deliver state-of-the-art
equipment,
fully tested, on time and ready for commercial operation.
2 3
TURNKEY DELIVERY
Our in-house design and engineering expertise, in
combination with our production, testing, commissioning and
installation facilities, enable us to deliver
custom-designed
equipment on a turnkey basis.
INNOVATIVE SOLUTIONS
We are constantly working on new solutions and systems
which we believe add value to the markets existing
technologies, and which have been implemented into many
of our products. As we have extensive operational experience
with a wide variety of heavy construction equipment, we are
able to use the best solutions for new products and
projects.
Our internal disciplines include Mechanical, Structural,
Naval,
Hydraulical, Electrical and Software Engineering.
Huisman, the innovative offshore equipment supplier has
developed a range of heavy duty anchor handling and towing
systems, providing a greater level of safety, simple
shipyard
installation, higher functionality and DNV compliance.
OUR COMPANY
Huisman is a global s pecialist in lifting, drilling and
subsea
solutions. The privately owned company, founded in 1929,
has extensive experience in the design and manufacturing
of heavy duty equipment for the worlds leading offshore
contractors. In April 2008, Bodewes Winches was taken over
by Huisman Equipment, which added to the know-how and
experience in the design of heavy duty winch systems.
OUR WORLDWIDE OPERATIONS
With production facilities in the Netherlands, Czech
Republic
and China, Huisman can deliver high quality products at
competitive production cost. A new production centre is
planned in Brazil which will become operational in 2013.
The complete cycl e of design, eng ineering, pro duction,
commissioning and (load) testing of the equipment is done
in-house. The Dutch and Chinese production centres have
a deep water quay and heavy lift capacity available. This
allows for installation, commissioning and load testing of
the
HUISMAN PRODUCTS
CRANES
PIPELAY
DRILLING
WINCHES
HEAVE COMPENSATION
VESSEL DESIGNS
SPECIAL PROJECTS
SPECIALS
equipment on board at our premises, thus providing real
turnkey delivery and significantly reducing risks for our
clients.
Over the lifetime of the equipment Huisman offers its
clients
support through its worldwide service network. We have
service centres located in Rotterdam, Houston, Singapore
and Rio de Janeiro able to provide on-board services as well
as on-distance troubleshooting.
8/11/2019 Brochure Ahts 2013 - Email
3/5
ND TOWING SYSTEMS
4
THE NEW GENERATION ANCHOR
HANDLING AND TOWING SYSTEM
The new anch or handlin g and towing w inches are bas ed on
conventional winch designs but have extended functionality.
The new confi guration us es proven indus try conce pts such
as
dynamic brakes and frequency controlled drive lines.
Safety Features
To meet the increasi ng demands of dee p water operation
s,several features are incorporated to safeguard vessel and
crew.
Emergency release function
To assure vessel s afety during h arsh offs hore conditi ons
with
the risk of dangerous forces jeopardizing the vessel
stability,
an emergency release function is provided. Integrated in the
winch drive train is a water-cooled clutch unit that allows
free
running of the winch drums, with the possibility to regain
control over the wire or chain when stability is regained.
This featu re complies wi th upcomin g requirements of the
International Maritime Organization (IMO) with regard to
response time and residual line tension.
Maximize permissible line tension
A winch sys tem can be set to a max imum permiss ible line
tension. This set-point is determined prior to the start of
the
offshore operation and depends on vessel loading conditions.
Exceeding the pre-set value will result in activating the
water-
cooled clutch as a dynamic brake and quickly pay-out wire.
Snatch load protection
The same water-cool ed clutch protect s the winch system
against the occurrence of any undesired snatch load that may
occur during anchor handling, towing or ploughing
operations.
OPERATIONAL FEATURES
Improving the operability and extending operational
capabilities contribute to efficient vessel use and part of
our
anchor handling and towing winch design.
High speed pay-out
Saving valuable vessel time is achieved by high speed
pay-out
using the water-cooled clutch in dynamic brake mode.
Accurate winch control
Using high-precision electric drives in combination with
direct
load measurement in the winch foundation and using our in-
house load pin design, operators are offered full winch
control
in all operating modes. The integrated clutch makes the
handling soft with a high precision.
SAFETY FEATURES
Emergency release for controlled fast line pay-out
restoring vessel stability
Pre-set of maximum permissible tension during critical
operations
Flexible and redundant drive system reduces
operational risks
Compliant with latest and future rules &
recommendations
Protection against wire rope breakage as a result fromsnatch
loads
5
8/11/2019 Brochure Ahts 2013 - Email
4/5
ND TOWING SYSTEMS
Installation Friendly
Design of the equipment is carried out with low shipyard
installation costs and risk in mind. The pinned-type
foundation
enables a quick and easy installation sequence without the
need for line-up and under grouting of winch supports.
Winch range
Our current range of anchor handling and towing winches
is DNV approved and covering a range from 200 to 500 mt
capacity. This range will be further extended and designs
can
be tailored to client requirements.
INSTALLATION FEATURES
Lower installation costs and risks with pinned
foundation and limited interfacing
Less dependence on installation sequence as
winch is provided as one complete unit
Space and weight saving compared to hydraulic
driven winches
Anchor Han dling drum
Anchor Han dling drum
Anchor Han dling drum
Pull 1st layer
Winch Type
200mt AHT winch
Double drum, waterfall
200mt AHT winch
Double drum, waterfall
250mt AHT winch
Double drum, waterfall
280mt AHT winch
Double drum, waterfall
350mt AHT winch
Double drum, waterfall
400mt AHT winch
Triple drum, waterfal l
500mt AHT winch
Triple drum, waterfal l
Drum type No.
1
1
1
1
1
1
1
1
1
1
1
2
1
2
260
260
290
290
450
450
350
350
500
500
450
450
550
600
1.400
1.700
2.900
2.900
6.500
3.250
1.500
1.500
2.500
2.000
7.000
3.000
7.000
4.000
83
76
86
86
92
92
76
76
89
96
87
87
87
87
Dynamic Brake 1stlayer
Holding
1stlayer
Wire
length
Wire
size
(mt @ m/min) (mt) (m) (mm)
Anchor Han dling drum
Anchor Han dling drum
Anchor Han dling drum
Anchor Han dling drum
200 @ 15
250 @ 22
200 @ 14
280 @ 10
200 @ 15
405 @ 14
200 @ 14
280 @ 10
50-200 @ 0-200
50-250 @ 0-250
50-200 @ 0-150
70-280 @ 0-200
50-200 @ 0-200
50-405 @ 0-150
50-200 @ 0-150
70-280 @ 0-200
400 @ 10
350 @ 10
500 @ 15
400 @ 10
370 @ 10
450 @ 20
100-400 @ 0-200
85-350 @ 0-200
100-420 @ 0-200
100-400 @ 0-200
85-350 @ 0-200
100-420 @ 0-200
Towing drum
A&R drum
Towing drum
Towing drum
Towing drum
Towing drum
Towing drum
OPERATIONAL FEATURES
High speed pay-out saving vessel time
Accurate winch c ontrol max imize system
performance
Fuel efficient and low emissions and lower
operational costs
Low noise level
Less maintenance and repair
Well proven user friendly control interface
6 7
Fuel efficient, environmentally friendly
Considerable savings on fuel consumption and subsequent
emissions is achieved using an electric drive system. With
a 30% higher efficiency and use of regenerative energy,
significant cost savings are made.
Larger storage capacity
As a result of a more c ompact winch d esign, larg er drum
storage capacities are offered at the same footprint on the
vessel. Alternatively a smaller winch set can installed
possibly
resulting in an overall smaller vessel beam. This results in
lower fuel consumption in transit.
