8/12/2019 Brosur pp
1/2
PT. DELTACRETINDO WIRA MANDIRI
Jalan Kesehatan Raya No. 48, Jakarta Pusat - Indonesia
Telp . +62 21 344 2919 Fax. + 62 21 351 1428
DELTACURE PBPolymer Emulsion Liquid Membrane Concrete Curing
Compound
DESCRIPTIONDeltacure PBis a polymer emulsion liquid membrane
curing compound, milky white in colour and cures
to a clear film.
USESProvides a film or high water retention enabling curing of
the concrete by reducing loss of water form the
concrete.
ADVANTAGES
Reduces surface shrinkage and cracking by eliminating moisture
loss from exposed surfaces
Enables cement to hydrate more efficiently
Easy application reduces labour costs
Save times-can apply as soon as possible after placing
concrete
Eliminates need for damp hessian, sand or polyethylene
Fast forming film dries within 60-120 minutes depending on
ambient temperatures and site conditions
Forms a non-staining continuous clear film on clean stain free
concrete or render surfaces and easily
applied and free from discolouration
Non-flammable and non-toxic under normal usage aand is supplied
ready for immediate use
Can be overcoated with specific after-trade, e.g rendering,
painting, etc.
APPLICATION INSTRUCTION
Application
Stir contents thoroughly before using. Spray Deltacure PB evenly
as possible over the freshly laid
concrete as soon as possible after final trowelling when the
surface water has freshly laid concrete as soon
as possible after final trowelling when he surface water has
disapeared (approx. 1-2 hours depending on
ambient temperature and atmospheric conditions). If spray
equipment is not available, apply with a soft
brush as soon as the concrete surface is hard enough.
Apply to vertical surface immediately after the formwork has
been removed. Apply at even coverage rateof not greater than 6 sq,
mtr per litre.
Ensure the concrete surface is completely free of stains, oils,
form coating, etc to obtain good adhesion of
Deltacure PB and of any other trades, and to avoid obtaining
discolouration or uneven surface effects.
Cleaning
Immediately after use, the spraying equipment should be cleaned
out, especially the line and nozzle, with
water.
8/12/2019 Brosur pp
2/2
C O N S T R U C T I O N P R O D U C T S
PT. DELTACRETINDO WIRA MANDIRI
Jalan Kesehatan Raya No. 48, Jakarta Pusat - Indonesia
Email : [email protected] Website : www.deltacretindo.com
Disclaimer :
Theinformationdetailed inthis brochure isliableto modification
from time totime inthe light of experience and of normal product
application, and before using orapplying theproductin site,the
customer arestronglyadvised tocontact Deltacretefor further more
detailed technical guidance. All data shown in the brochure
aretypical laboratory result achieved in ideal conditions, site
results could be different.Because Deltacrete has no direct or
continuous control over where or how itsproducts are applied,
Deltacrete can not accept any liability either directly
orindirectly arising from the use of its product, whether or not in
accordance with anyadvice, specification, recommendation or
informationgiven byit.
Telp. +62 21 344 2919 Fax. + 62 21 351 1428
TECHNICAL DATADeltacure PB consists of a stable emulsion based
on suitable processed PVA emulsions,
plasticizers, etc.
Specific Gravity at 250
C 1.00-1.10
Colour Milky White
Dry Film Colour Clear
Dry Time (approx) 1-2 hours
HEALTH AND SAFETY
If contact with the resin occurs, the skin should be washed with
soap and water non solvent. Aresin removing cream should preferably
used. Goggles should be worn when spraying with a
shout lance. Any eye contamination should be washed with plenty
of water and medical treatment
sought. When used in enclosed areas, goog ventilation must be
provided.
FIREDeltacure PB is non-flammable.
CODE D5 - DC 06/2010
