97
CA ADW Worx® ® 201 A C C 13 Sp Anthony W. H CAD Training T Copyright© 20 ecific Comprehe cation CADWo Horn Technologies 012 – All righ ensive training rx 2013 Speci ns g in the new , LLC ts reserved ifications!

CADWorx 2013 Specifications

Embed Size (px)

DESCRIPTION

CADWorx 2013 Specifications

Citation preview

  • CA

    ADWWorx201

    A

    C

    C

    13Sp

    AnthonyW.H

    CADTrainingT

    Copyright20

    ecific

    Comprehe

    cation

    CADWo

    Horn

    Technologies

    012Allrigh

    ensivetrainingrx2013Speci

    ns

    ginthenew

    ,LLC

    tsreserved

    ifications!

  • PipingDesignOnline.com CADWorx2013SpecificationsVideo1

    2

    Copyright2012AllRightsReservedCADTrainingTechnologies,LLC

    TableofContents

    Video 8 Modifying the Catalog

    Modifying for Enhanced Mode Video 9 Creating a new Spec Adding Components to Spec Video 10 Testing the Spec Viewing in Enhanced Mode Video 11 Creating a Branch Table Adding Branch Components Checking the Catalog Video 12 Testing the Branch Table Video 13 An in-line User Shape Testing in CADWorx & Isogen Video 14 3D non-sym User Shape Testing in CADWorx & Isogen Video 15 Automating Long Desc Adding to the Catalog Video 16 Automating Long Desc Using Data Tables and Fields Video 17 Automating Long Desc The Cut and Paste Document

    Video i - Getting Setup The CADWorx environment Video ii - Setting up Isogen Project Manager and folders Video iii - Using Video Training Maximizing the videos Video 1 Setting the Configuration Creating a Company Catalog Video 2 Modifying the Size Table Viewing the other Tables Importing Legacy Data Files Video 3 Creating a New Data File A New Top works file Video 4 Valve with Special End Types Video 5 Creating a New Project Importing Legacy Specs Video 6 Modifying Component Info Thickness in Long Desc. Adding Top works in a Spec Testing Results Video 7 Adding Valves to the Spec Testing Results

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo1

    Sp

    1

    2

    3

    4

    pecifica

    1. In the viCADWowork witchangedused librinformat

    2. When wfolders. Library_differentclick on that carr

    3. If I doubthe meaan opencolumnswith thesthem aswork witour desca numbe

    4. The newThe newlibrary fotable; wenow goinfrom themore fle

    C

    ations V

    deos that foorx catalogth the data d significanraries comption.

    we look at wWe had the

    _MM. Thest pressure r150, we caried all the

    ble-click oneasurement dning and clos that contase, it was a needed. Wth parts of tcriptions to er of years.

    w way is simw catalogs, olders, are e'll have a mng to be wo

    ese tables inexibility than

    Copyright201

    Video O

    ollow, we'll g and specfiles and cotly in this neposed of te

    what we usee Library_I,

    se folders earatings, likean see that measureme

    e of these fdata was loosing parenained the daa simple maWe built ourthese data fsuit our pa

    milar, but thwhich usedcollections material taborking with nto our spen we had be

    12AllRightsRe

    One

    be workingifications exomponent iew versionxt files for i

    ed before, w the Libraryach contain

    e the 150 orin these folent data for

    iles, we canocated. It's

    theses, andata. Once watter to add r specs, usifiles as nee

    articular spe

    ings are mod to be the of tables n

    ble, and so tables, we

    ecs with moefore.

    3

    eservedCADT

    g with the nxplorer. Thenformation . In the pasts compone

    we had threy_M, and thn subfoldersr the 300. Ilders are thr the compo

    n see this isreally a texd it had varwe got usedto them or

    ng a spec eeded, and wec. This wor

    ore highly oLibrary_I oow. We'll hforth. Beccan combin

    ore options;

    TrainingTechno

    ew e way we has

    st, CADWorent

    ee main he s for the f I double-

    he data filesonents.

    s where all xt file. It harious d to workinmodify

    editor to we modifiedrked well fo

    organized. r the other have a sizeause we'rene fields we'll have

    rx

    s

    d

    g

    d or

    e

    ologies,LLC

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo1

    5

    6

    7

    8

    9

    1

    5. With thedifferentreally quversion. will add our desi

    6. So at firsto, but thsetting ua look at

    7. I have tofolder. Hlook, nowWe do hclick tha

    8. What wecollectioand a sanew wayspecifica

    9. One way the CAclick tha

    10. You canwent to there's start it fralso staradvanta

    C

    e new systet conditionsuite involved

    The new vadditional cgners.

    st, our newhe end resuup our spect that now.

    o Windows Here is the w we don't

    have a specat one, and

    e have nowon of specifiample_inchy we're goinations is go

    y we can stADWorxSpat file and

    n also start CADWorx aa button throm within trt it from wige of doing

    Copyright201

    em, we'll bes very easilyd when we

    version alsocontrols to

    w version miult is going cifications a

    Explorer oPlant foldesee the Lib

    c folder, tho we'll take a

    w are some ic catalogs,

    h project. Song to put to

    oing to inclu

    tart the spepecEditor.ethe spec ed

    the spec edand you loohat will stathe folder, tthin CADW

    g it the way

    12AllRightsRe

    able to crey, which wawere work

    o contains ahow our pr

    ight take a to be a mu

    and compon

    pened, ander. If I doubbrary_I or oough, so I'ma look at its

    sample cat, as well aso now the n

    ogether our ude projects

    ec editor is texe file. So ditor will sta

    ditor from wok on the Cart the specthe way we

    Worx itself. we just sho

    4

    eservedCADT

    eate compoas somethinking with thea branch tabojects get m

    little bit of gch improve

    nent data. S

    d I'm in the ble-click Plother librarym going to ds contents.

    talogs. We a sample_

    new data stcomponen

    s.

    to double cI'm going t

    art.

    within CADWCADWorx Pc editor. S just did, orOne optionowed you, w

    TrainingTechno

    onents with ng that wase older ble. This modeled by

    getting useded way of So let's take

    CADWorx lant and I

    y folders. double-

    e see a _inch catalotructure, thet

    click this filo double-

    Worx. If wePlant I tab, So you can r you can n or one where you

    s

    y

    d

    e

    og e

    le

    e

    ologies,LLC

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo1

    1

    1

    1

    1

    double-cspec edthese filespecifica

    11. What wcatalog source fsimilar tosample modifyinmake outhe syste

    12. Click thseveral tcatalog,

    13. If we're were anfor clientgoing tosame hename in

    14. Next wewe go tothe samgoing tosame foone you

    click CADWitor as a staes over to mations but d

    we're going tin this systefiles for all oo working wcatalogs if w

    ng it, well cur own copiem separat

    his top buttypes of caor a global

    an end use engineerints, we migh click on cere (Compa the field if

    ell tell the so this box wples that sh use the Sr this startin like?

    C

    WorxSpecEdandalone amachines wdon't neces

    to do first isem is a collof the compwith library_we choose

    changing theies, and thete.

    tton and seatalogs: a cl catalog.

    er, we woulng design fiht want to mcompany cany1.cmp)you want.

    system whewith dots in hip with theample_Meng example

    Copyright201

    ditor.exe is pplication.

    where peopsarily do de

    s set up ourlection of taponents. In_M or librar, but if we se source caen keep the

    elect new ccompany ca

    ld make a crm making

    make an indatalog. Ill

    ). You can i

    ere our souit and click,

    e system. Fetric_Inch.e, and then

    12AllRightsRe

    it allows yo So you co

    ple might woesign work.

    r new catalables that an the past, itry_I. We castart addingatalogs. It'se ones that

    atalog. Thatalog, an in

    company caa variety o

    dustry catalleave the nnsert your

    rce-file is lo, we can chFor this exa Why don't later you c

    5

    eservedCADT

    ou to run thuld copy ork on

    og. A are the t would be

    an use the g or s better to ship with

    here are ndustry

    atalog. If wf catalogs og. I'm name the company

    ocated. If hoose one oample, I'm

    you do thecan do the

    TrainingTechno

    he

    we

    of

    e

    ologies,LLC

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo1

    1

    1

    1

    1

    1

    15. After selthe dowthings a

    16. The catalocate it folder an

    17. If I douthem. Tthe botto

    18. If you clthe bottcatalog. button asize tabl

    19. So that'tables incatalogsample. things youp, and see ther

    C

    lecting thatwn arrow, are set as ne

    alog can bein a specif

    nd click OK

    ble-click thThe sample om of the s

    ick the plutom, you ca Ill highlig

    and drag itle in the ne

    's what we'n the base. That way The reaso

    ou don't waI'll do the s

    re are a var

    Copyright201

    , click openand chooseeeded.

    e saved in dic folder. I

    K. It's essen

    he data tabcatalog thacreen. It's

    us next to san see therght it and tht up and re

    ew company

    re going to e catalog dy we can buon you use ant to bring same with riety of table

    12AllRightsRe

    n. Next wee the Metric

    different locll save this ntially a bla

    bles, there'at I used foshown as t

    size table inre is a size hen hold delease. It wy catalog.

    do. We're rag them u

    uild our catathis methodin. Ill copythe end ty

    es in the ba

    6

    eservedCADT

    ll set the uc/Inch form

    cations, if yoexample innk catalog

    s nothing dr my sourcethe base ca

    n the base table in theown the le

    will get copi

    going to clup into ouralog to matcd is there my the thickype tables.ase catalog

    TrainingTechno

    units. Clickat. Now

    ou want to n the defaulat this poin

    down in e is down aatalog here

    catalog at e base eft mouse ed into the

    lick these r companych the

    may be somness table You can

    g.

    k

    lt nt.

    at .

    y

    me e

    ologies,LLC

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo1

    2

    2

    2

    2

    20. Ill click while hoThen drtable in t

    21. Now wemeasurefolders idescript

    22. Ill comedifferentshift keyselect al

    23. Then hothese ucopied fhit the psee thatthis poin

    C

    on the butolding dowrag them uthe compan

    'll bring in ement files.n earlier veive data, ju

    e down and t componeny, Ill click ll of them.

    olding dowp to the co

    from the salus next to

    t all the infont, and then

    Copyright201

    ttweld endwn the Shifp, and theyny catalog.

    the data ta. These us

    ersion. In thst measure

    click the pnt types arethe first a

    wn the left bompany cample catalodata tables

    ormation is n we'll conti

    12AllRightsRe

    d type, and ft key. Thayll be cop

    ables. Thesed to be tehis versionement data.

    plus next te all listed. nd last one

    button of tatalog and og into the cs in the comin there. Sonue from h

    7

    eservedCADT

    then I'll scat selects apied into the

    ese are all txt files in ththey dont c.

    to data tabHolding de listed, wh

    he mouse,release. Tcompany c

    mpany catalo why don'tere?

    TrainingTechno

    roll down ll of these. e end type

    he he library contain

    les. The own the hich will

    , Ill drag They'll be atalog. If I log, I can you get it t

    to

    ologies,LLC

  • Sp

    1

    2

    3

    4

    5

    6

    pecifica

    1. In the prsee howthe inforbuild wo

    2. Looking scheduleclick theSize, an

    3. I can secomponin size toif we wato a spre

    4. For our this squathis rowYou can

    5. Click thand it opcompongrades, are appl

    6. There's of materautomat

    ations V

    revious videw it's organizrmation neeorking spec

    at these, we, thicknesse plus nex

    nd the table

    e now that ents that rao 60 inches

    ant to. It's aeadsheet.

    example, hare, and the

    w. Click "On see that it

    he plus nexpens the lisents. We ccompositiolied to vario

    also a part rial. Later, tic part num

    Video Tw

    eo we creatzed. This ieded to desifications.

    we have a ss, end type

    xt to the siz opens.

    this catalogange from as. We can aan XML file,

    highlight then you can

    OK", and it s quite eas

    xt to the mast of materiacan see diffons, and deous types o

    number aswe can use

    mber for eac

    wo

    ted our news a list of ta

    scribe the c

    size table; we, and data ze table, an

    g is going toan eighth ofadd to this t, and it's go

    he three an right clickwill take thasy to work w

    aterial tablals that areferent kindsnsities. Wef componen

    ssociated we these valuch compone

    w catalog. ables that ccomponents

    we have a mtables. I'm

    nd I'll doub

    o be able tof an inch altable or takoing to beha

    nd a half, ok and click at size out with.

    le. Doubleavailable fo

    s of specifice can see hnts.

    with each paues to buildent.

    Now lets contain all s and to

    material, going to le click

    o handle l the way ue things ouave similar

    r just click ito remove

    of the table

    e click MATor our cations, how these

    articular kind an

    p ut

    in e e.

    T

    d

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo22

    7

    8

    9

    1

    1

    7. Scrollingtypical eused latweight o

    8. Next, weSCH to includedlike.

    9. We'll do plus, ancomponwe can sschedule

    10. Go to scthickneslisted in decimal thicknessystem hlong deshappen.

    11. Next, cliThere arIt is stratypes. Fthreadedpart of o

    C

    g down, youentry, an A5er, along w

    of compone

    ell take a loopen it. Sh

    d in this cata

    the same ond double cent thicknesee how thes.

    chedule 40ss on a onemillimetersinch value

    ss informatihas the abiscriptions; t

    ick the plure a numbeight forwardFor exampled on one siour exercise

    Copyright201

    u can see t53 Grade B

    with the thickents.

    ook at the shown are thalog. You c

    on the thicclick THK.

    esses. If wee thickness

    0 columns -inch sched

    s. If you're w. This tableon needed lity to map there's an e

    us next to eer of end typd to create e, we couldde and flan

    es later.

    12AllRightsRe

    his list is ve. The denskness table

    schedule tahe various scan always

    ckness tab The syste

    e look at a os are shown

    and expandule 40 is 3working in ie is going tofor these cthese thick

    easy proces

    end type tapes availabcomponen

    d make a ganged on the

    2

    eservedCADT

    ery extensivsities are goe, to calcula

    ble. Doubschedules ts add to the

    le. We'll cem shows thone-inch con based on

    nd it. The w3.38. That'smperial, yoo contain acomponentskness valuess to make

    ables and eble for use its with diffeate valve the other. We

    TrainingTechno

    ve. Here's oing to be ate the

    le click that are ese if you

    click the he omponent, the

    wall s the value ou'll have a ll the s. The es into the that

    expand it. n CADWor

    erent end hat's e'll do that a

    a

    rx.

    as

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo22

    1

    1

    1

    1

    1

    12. Lets mitables. shows thwhat we

    13. Click thgate valv

    14. Double see thatThis file descriptneeds to

    15. Let's saywanted size ranof sizes.entries rfile fromis done.

    16. To bringto the tothe poinimport lesystem w

    C

    nimize thisScroll dow

    he various e had in ear

    he plus nexves that are

    click the gt this file rancontains aive data in o draw the c

    y we wantegate valvesge? What . We couldright in this somewher

    g in a legacyop, and wenter on thaegacy data will display

    Copyright201

    s table, andwn to Valvetypes of varlier version

    xt to gate ve included

    gate flangenges from all the measthis, but it hcomponent

    ed to get a ls that went we need to

    d take a valvtable. Ano

    re else that

    y file, we ne can see th

    at and rightfrom files. a dialog bo

    12AllRightsRe

    d click the es and clic

    alves in the ns.

    valve, and win this cata

    ed 150 (gata two-inch usurement dahas all the mts.

    arger rangeup to 48 in

    o do is edit ve cut shee

    other choice has the da

    eed to do ahe name oft click, I ha So you doox for us.

    3

    eservedCADT

    plus next tck the pluscatalog. It

    we'll see thlog.

    t_f_150), anup to a 30-iata. Theremeasureme

    e here. Whches or somand expandet and begine would be ata. Let's se

    a few steps.f the cataloave an optio the same,

    TrainingTechno

    to data s. This s similar to

    e different

    nd you can inch file. are no

    ents that it

    hat if we me other d this rangen adding to import a ee how tha

    . Scroll up og. If I puton here to and the

    o

    e

    at

    t

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo22

    1

    1

    1

    2

    2

    17. This willfile, or wI'm goingfind the

    18. By defauyour newClick onto bring

    19. If you hayou cou(whatevpreviousthe file ybutton cbeing plin these

    20. In my cahave preclick thaLibrary_the 150.

    21. Now Ill is a flangIt's this owill bringpreviousclick thefolder th

    C

    let us bringwe can bringg to click "file to impo

    ult, the systwest version the C: drin.

    ave a previold go to theer version ys version ofyoull need called Lessayed. You exercises.

    ase, I'm goevious versat, and I'll g_M, becaus.

    look for theged gate vaone right heg it into the s version ofe file in yourhat you dow

    Copyright201

    g in some fg in folders"Add Files,ort.

    tem will takon of CADWive, and we

    ous versione CADWorxyou might hf CADWorxin this video

    son Files ocan click it

    oing to go sions loadedgo to Plantse that's the

    e data files talve data filere (GAT_Fimport dial

    f CADWorxr CADWorx

    wnloaded. T

    12AllRightsRe

    files. We ca. We can a," and we c

    ke you to yoWorx, probaell find the

    n of CADWox 2012 or Chave). If yox on your mo in the down the webpt to downloa

    back to CAd on my mat and doube format I'm

    that I needle which is F_L.150). Iog box. No

    x on your mx_Lesson_FThe file is n

    4

    eservedCADT

    an bring in also take than do a sea

    our current bly in the sfolder or fil

    orx on yourADWorx 20

    ou don't havachine, Ivewnload files

    page wheread the files

    ADWorx 20achine. I'll ble click it. m using, and

    . What I'm set up for laIf I double ote: If you achine you

    Files\Specifnamed GAT

    TrainingTechno

    an individuings out. arch and

    location onpec folder. e we want

    r machine 010 folder ve a e included s. Theres this video youll need

    012, since Idouble I'll go to d I'll go to

    looking forarger sizesclick it, it dont have

    u can doublefications T_F_L.150.

    al

    a is

    d

    I

    r s.

    a e

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo22

    2

    2

    2

    2

    2

    22. Clicking you clickin by eith

    23. Click Bthe datagate valvgreat for

    24. In the olthe valvefrom a Clike this is usuall

    25. We've gwe will sIf we seImport,

    26. Another you'll seto bring can prin

    C

    By Columk By Columher one.

    By Columna file will opeve that goer what we n

    der versione data cam

    Crane 55 cagiven sincely not includ

    ot this highselect one tlect the Gait will impo

    thing to doee a record

    in legacy dt out later t

    Copyright201

    mn Name dmn Count y

    n Count. Ifen and you

    es from 18 uneed.

    ns, the datame from. Thatalog. Thee they can vded since th

    hlighted. Wethat matcheate Valve, Brt the data

    o is click onof the diffe

    data into yoo have a re

    12AllRightsRe

    isplays somyou'll see th

    f you doubu can see thup to 48 inc

    a files includhis informate valves usuvary. With hey're goin

    e've got a lies the type Buttweld/Ffile into our

    n the View rent converur catalog. ecord of you

    5

    eservedCADT

    me column hose. We c

    le click thehe details. ches. So th

    ded what mtion in this fually have ifittings, thisg to be con

    st of data fof file were

    Flanged, anr catalog.

    Log File brsions that This is somur work.

    TrainingTechno

    names. If can bring it

    e file nameThis is a

    his will work

    manufacturefile came informations informationsistent.

    file types, soe bringing ind we click

    button, andyou've donmething yo

    e,

    k

    er

    n on

    o n.

    k

    d e u

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo22

    2

    2

    2

    27. Now letvalves agate flanfile will o

    28. So that'sthe new yourself them as

    29. So you continue

    C

    s click theand youll senge large (Gopen, and w

    s how you cversion. Y

    f from scratc part of you

    do what e after that.

    Copyright201

    e "Close" bee the file wGAT_F_L_we can see

    can bring inYou might hch, and youur catalog.

    weve sho

    12AllRightsRe

    button. Loowe just impo150). If wethe data.

    n legacy dahave some u want to br

    own up to

    6

    eservedCADT

    ok down unorted. Here

    e double cl

    ata into yourcomponentring them in

    o here, and

    TrainingTechno

    nder gate e it is, this lick it, the

    r catalog ints you built n and have

    d then we

    e'll

    ologies,LLC

  • Sp

    1

    2

    3

    4

    5

    6

    pecifica

    1. We're mimportedcould drimportinfrom dat

    2. Now wecreate ayoull dotype of v

    3. In this exand we'rgoing tosettingsversion enhance

    4. Lets looclick ondouble

    5. There arto work. the bolt when wethe flangtables.

    6. Well clofiles fromdown toScroll d

    ations V

    making goodd a legacy fraw large gag informatiota files that

    ll see how a couple ofo in the futuvalve into y

    xample I'vere going to take a looks, which wilof CADWored, the syst

    ok at flangen the plus nclick on th

    re three thi They're gocircle diam

    ere runningges get mod

    ose this form scratch. o Valves andown to Ga

    Video T

    d progress. file, a file froate valves. on into the were creat

    to create df new data re, for examour catalog

    e got a coupuse those k at is somell show enhrx, if you setem can dis

    es. Ill expanext to Flahe FLG_W_

    ngs to fill ooing to be vmeter, and g in enhancdeled, base

    r now. NexWe'll be ad

    nd click theate Valve a

    hree

    In the prevom CADWo We saw h2013 syste

    ted in earlie

    data files fro files in thimple, if youg.

    ple of cut sas examplee of the enh

    hanced graet your drawsplay bolt h

    and the typeange Weld _150. This

    ut to get thevalues for t the bolt hoced mode wed on these

    xt were goidding a coue plus next

    and click on

    vious videoorx 2012 or

    how to go abem from speer versions.

    om scratch.is video. T

    u want to ad

    heets for soes. Anothehanced mo

    aphics. In twing mode oles in the

    es of FlangNeck, and opens up t

    e enhancehe bolt holole numbewe'll see thee values in t

    ng to build uple of valvet to that to en the plus

    o, we r 2010 that bout ecs and

    . We'll This is what dd a new

    ome valveser thing we'rode this new to flanges.

    ges, and then Ill

    the data file

    d graphicsle diamete

    er. Then e holes in the data

    some data es. Scrollexpand it. next to that

    s, re

    e.

    s r,

    t.

  • PipinggDesignOOnline.comm

    7

    8

    9

    7. Hover thcan addus, and GAT_F_flanged

    8. In the sispecify t10, andwanted t

    9. The nexconditionend-typ

    C

    he pointer d a data tabwe can beg

    _CMPT_15gate valve,

    ize table clthe sizes thd a 12 valvto include.

    xt step is to n on both e

    pe on both

    Copyright201

    on Gate Vble. The sysgin to fill thi

    50. This wil, 150 pound

    lick the bohat you wanve. You co

    set these vends. Clickends. The

    12AllRightsRe

    Valve and tstem will brs out. So wl be a data d rating.

    x with 3 dont to work would add ho

    valves to hak the box toe first end w

    CADWor

    2

    eservedCADT

    then right cring up a diawhat we'll ca

    file for a co

    ots. Here ywith. Well eowever man

    ave the samo Apply towill be a fl

    x2013Sp

    TrainingTechno

    click and walog box foall this one ompact

    you can enter an 8ny sizes you

    me end the same ange.

    pecificatio

    ologies,LLC

    we r is

    , u

    nsVideo3

    3

  • PipinggDesignOOnline.comm

    1

    1

    1

    1

    1

    10. For the

    11. The par0055. FoCOMPA

    12. Our dataundernevalues. 406. Thright forFinally fo399, andfor the v

    13. Now clicsmall indthe projehave theadd som

    14. Minimizplus. CTop Wocan addcreated.

    C

    end type, s

    rt number ior descript

    ACT EXPAN

    a file for is reath the huWe're goin

    he one under the lengtor the weigd 562. Thisvalves.

    ck the X todicator nexect or the ce measurem

    me top work

    ze the valveClick the pl

    rks file. Hod a top wor.

    Copyright201

    select the

    s optional. tion, we caNDING, and

    ready for filub OD diamng to use 34er that will bhs, and we

    ght, click ins will comp

    o close it, at to the namatalog is sa

    ment data inks for this va

    es and scrus next to

    over over Wrks data file

    12AllRightsRe

    FLG_gat_f

    For this exan put in hed click OK

    ling out. Cmeter and w42, and thebe 482. The'll enter 29n the field flete the dim

    and save itme, but thataved and ren here to dralve.

    roll up to TWheel. Th

    Wheel and e for the ga

    CADWor

    3

    eservedCADT

    f_150.

    xample, let're GATE V.

    Click in thewe'll put in

    e one underhen we'll go92, 330, andfor that an

    mensional in

    t. The systet will disappeopened. Wraw this. N

    op Works.his is whereright click

    ate valve we

    x2013Sp

    TrainingTechno

    's put in VALVE,

    box some

    r that will beo over to thd 358. d enter 28nformation

    em has a pear once We now Next well

    Click thee well add k. Now we e just

    pecificatio

    ologies,LLC

    e he

    1,

    e a

    nsVideo3

    3

  • PipinggDesignOOnline.comm

    1

    1

    1

    1

    15. The namWHEEL

    16. For Typbe the sCOMPA

    17. Now wevalue withicknes1168, 13

    18. Now cloto work for the nand then

    C

    me for the tL_GAT_CM

    e, click thesame, 8, 10ACT EXPAN

    ll fill out sill be 150, 1ss will be 376, and fi

    ose this by now. We h

    next video. n we'll cont

    Copyright201

    op works fiMPT_150_M

    e down arr0, and 12. NDING GA

    ome data. 165, and the12, 15, andnally 1567

    clicking thhave one m

    Get this infinue on afte

    12AllRightsRe

    le will be M.

    row, and seDescriptioTE VALVE

    Theres noen finally 17d 18. The o.

    he X, and smore valve to

    formation fier that.

    CADWor

    4

    eservedCADT

    elect Wheeon: TOP WE, then click

    ot a lot requ78. The op

    operator len

    save it. Tho add, but lilled in as w

    x2013Sp

    TrainingTechno

    el. Size wiWORKS FO

    k OK.

    uired. Thisperator ngth will b

    is is ready let's save it

    we showed,

    pecificatio

    ologies,LLC

    ll R

    s

    be

    t ,

    nsVideo3

    3

  • Sp

    1

    2

    3

    4

    pecifica

    1. In this viThis valvwill be th

    2. Were intables, sexpand will expaprevious

    3. If your dpreviouscan closahead aPropertiand "Edshould c

    4. Now weGate Vabe a gatlock keythreaded

    ations V

    ideo, we're ve will havehreaded on

    n the spec scroll dowthe list. Cl

    and. Whens valve (GA

    display has sly entered,se and reopand right clices, add initited by" fiel

    clear the ex

    e'll add the alve, and I'mte valve thay and type Gd on one en

    Video Fo

    going to coe different en one end a

    editor. Clwn to valves

    ick the plun we look atAT_F_CMPT

    a small gra, its usuallypen the speck on this, atials or yourlds. If you txclamation p

    second valm going to at has specGAT_THD_nd and flan

    our

    ontinue addend types oand flanged

    ick the plus and click

    us next to gt the data fiT_150).

    aphic next toy not a probec editor. Aand go to Pr name undthen close point graph

    lve. I'm goiadd a dataial end type

    _x_FLG. Itged on the

    ding a secoon each end

    on the othe

    us next to tk the plus ngate valvesles, we can

    o the valveblem. To cl

    Another wayProperties. der the "Crethe Propert

    hic.

    ing to righta table. Thes. Push d's a gate vaother.

    ond valve. d. This valver end.

    the data next to it to s and that n see our

    we lear it, you y is to go Under

    eated by" ties dialog i

    t click on is is going town the caalve

    ve

    it

    to ap

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo44

    5

    6

    7

    8

    5. We neeit, click tdo one edot, and

    6. This vaconditiosince westartinggate valv

    7. Scroll dvalve. Tpound ra

    8. Well do"flanged

    C

    ed to have athe down arentry for thid we'll set it

    alve will haons. On the had flangg end click ve.

    down and loThe one listating (THR

    somethingd gate", so s

    Copyright201

    a size tablerrow and jus example.t for two inc

    ave differene previous ed on both the down

    ook for "threted is "threaD_GAT_T_

    g similar forscroll dow

    12AllRightsRe

    e available st select siz. Click theches. Clic

    nt starting valve we hends. But arrow and

    eaded." Thaded gate",_C_800).

    r the other en to "flang

    2

    eservedCADT

    next. If yoze. We're o

    e box with tck OK once

    and endinhad that box

    for this val look for a t

    hen look for and it's go

    end conditioge," and loo

    TrainingTechno

    u don't seeonly going the dot do

    e thats done

    ng x checked, ve, for the threaded

    r a gate ot an 800

    on. Look fook for GAT

    e to t e.

    or T.

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo44

    9

    1

    1

    1

    1

    1

    9. Listed isenter 00FLG. O

    10. We havFor the l

    11. Click thclick Ye

    12. The grapgo to PrAH, and

    13. To cleacatalogSample

    14. Open thcatalog yreopensand clicGate vacompletclear no

    C

    s the FLG_ 056. The de

    Once finishe

    ve one sizelength, ent

    he X in the ces to save i

    phic next tooperties. E

    d I'll do the i

    r the graph. Click on tInch. Save

    he Sample you just co

    s, everythingck the plusalves and yed is there.tification sy

    Copyright201

    gat_f_150escription

    ed, click OK

    e valve to filter 178. Fo

    corner of thit.

    o the new fiEnter your in the lower

    hic, well clothe main bue the work

    Inch catalmpleted (Cg will come, and comeou can see. So savingymbols like

    12AllRightsRe

    . The part will be GA

    K.

    l out. On thor the weigh

    he dialog bo

    le appearsnitials herer field, then

    ose and reoutton at thek when pro

    og. Next, Company1.e in clean. Ge down to Ve now that t and reopewe just had

    3

    eservedCADT

    number isATE VALVE

    he hub ODht, enter 4.

    ox to close

    . Right clic

    . In my cas close it.

    open the C top, and clmpted.

    click on thcmp). WhGo to Data

    Valves. Exphe work we

    ening the cad.

    TrainingTechno

    s optional bE, THD x

    D, use 60.3.

    this and

    ck here, andse, I'll put

    Company lick on

    he new en it Tables, pand the e just atalog will

    ut

    d

    ologies,LLC

  • PipingDesignOnline.com CADWorx2013SpecificationsVideo4

    4

    Copyright2012AllRightsReservedCADTrainingTechnologies,LLC

    15. The next videos will cover working with specifications. We'll bring in some legacy specs, and we'll add some records to them. We'll also use these data files we just completed and well add them into a spec for use.

    16. We've got a few more things to cover, but we're making good progress!

  • Sp

    1

    2

    3

    4

    pecifica

    1. In the prWe set uSo we hwe're goAfter thaCADWo

    2. The SpeRibbon tthe .exe

    3. Click thproject.organizeyou can source cbrowse

    4. Now jusquite spfiberglasone thatthey broformatte

    ations V

    revious videup a compa

    have a lot ofoing to do nat the specsorx.

    ec Editor isto start it, o file to start

    he top butto." Projects ed in the neadd your o

    catalog. Cl.

    t looking atecific. This ss reinforcet's going to ought some ed the data

    Video F

    eos, we've any catalogf data that w

    now is organs can be us

    s running. Yor you can gt it.

    on in the spare collecti

    ew version. own name iick the box

    t what's listeone, for ins

    ed pipe in inbe stainlesof the old dfiles and sp

    ive

    been workig, and we owe can begnize that dased to mode

    You can cligo in the fol

    pec editor aions of spe Leave thef you like. x with thre

    ed we can stance, is gnches, in imss steel in indata acrosspec informa

    ing with therganized sogin to work ata in speciel compone

    ick the buttolder and do

    and select cs. Its howe name as The system

    ee dots in i

    see some ogoing to be mperial sizenches. So ts. They havation in this

    e catalogs. ome tableswith. Whatfications.

    ents in

    on on the ouble click

    "New w theyre Project1, o

    m requires ait to

    of these arefor s. Here's this is how ve them way now.

    . t

    or a

    e

  • PipinggDesignOOnline.comm

    5

    6

    7

    8

    9

    5. Toward metric, smore exLIB_I or

    6. And we our first select thCompan

    7. For the b

    8. Next areor a partout of thinto a st

    9. This is aYou cansome ththicknesclosely i

    C

    the end of sample metxtensive. Th

    LIB_MM o

    used the Scatalog, ouhat one, itsny catalog,

    bill of mate

    e some optit number fo

    he tables, aring for you

    a way to aun bring in soickness info

    ss values inn a later vid

    Copyright201

    the list we tric inch cathese actualor Lib_M.

    Sample_Meur Companys going to band click o

    erial type,

    ions for setormat. Onend the systu as a long

    tomate desome materiaormation, if

    nto the long deo. For no

    12AllRightsRe

    see some stalogs. Thely are what

    tric_Inch cay catalog. Sbe the Comopen.

    leave that a

    ting up a loe option is toem will actudescription

    scriptions inal informatif you woulddescription

    ow, let's lea

    CADWor

    2

    eservedCADT

    sample inchese are goint we used to

    atalog whenSo lets go

    mpany1.cmp

    as fabricat

    ong descripto select ceually put th

    n.

    n your specion. You ca

    d like to inclns. We'll loave it blank

    x2013Sp

    TrainingTechno

    h, sample ng to be o see unde

    n we made back and p file, the

    tion.

    tion format rtain fields ese togethe

    cifications. an bring in ude

    ook at that k.

    pecificatio

    ologies,LLC

    er

    er

    nsVideo5

    5

  • PipinggDesignOOnline.comm

    1

    1

    1

    1

    10. There issystem ntables adynamicexactly h

    11. For this will saveYou couhere andaccess can savrestricti

    12. Our projspec frohave sopreviousimport aImport L

    13. Click thold CADa CADWyour sys

    C

    s a similar onow allowsnd put them

    c type part nhow to orde

    project dee it in the CAuld save thisd accept thto modifyi

    ve these in ions)

    ject has beem scratch ome other os project ova legacy speLegacy Sp

    he box withDWorx fold

    Worx 2012 vstem you ca

    Copyright201

    option for s us to bring

    m together number. Uer a specific

    escription eADWorx fos elsewheree default. (ing your pra folder o

    en created.or we couldptions here

    ver to our neecification i

    pecification

    h the 3 dotsder (if you hversion. If yan browse t

    12AllRightsRe

    setting up a g in differeninto a stringsing this apc compone

    enter Test older under e if you wan(Note: If yrojects andn your net

    . At this pod import onee. We couldew project. nto our Pro

    n button.

    s in it to brohave one). you have oto them and

    CADWor

    3

    eservedCADT

    part numbnt fields out g that wouldpproach, went.

    Project. BPlant, undented to. I'll

    you want tod specificatwork with

    oint, we coue into our pd move dat For this ex

    oject. Click

    owse. BrowOn my mald specs eld import the

    x2013Sp

    TrainingTechno

    er. The of these

    d build a e can know

    By default, iter Spec. just say OK

    o restrict ations you access

    uld add a project. Weta from a xample, letk on the

    wse to youachine heresewhere onem.

    pecificatio

    ologies,LLC

    w

    t

    K

    e

    's

    ur s n

    nsVideo5

    5

  • PipinggDesignOOnline.comm

    1

    1

    1

    14. If there some inYou shofolder. IB10, C1go back

    15. Select t

    16. The systable. Wnote her

    C

    are not legn the folder ould have a If we go the0 spec. Soto my CAD

    the A10_M

    stem requirWe'll select re shows th

    Copyright201

    gacy specsyou downloCADWorx_

    ere for a moo you can uDWorx 2012

    M spec, and

    res a cataloImport an

    hat it came

    12AllRightsRe

    s on your moaded with _Lessons_oment, youuse these if 2 and get m

    d click Ope

    og to link to.d the spec in successf

    CADWor

    4

    eservedCADT

    machine I the lesson

    _Files\Specill see thereyou like. I'm

    mine there.

    en.

    . It also newill be impfully.

    x2013Sp

    TrainingTechno

    included s files in it. ifications e is an A10m going to

    eds a size orted. A

    pecificatio

    ologies,LLC

    ,

    nsVideo5

    5

  • PipinggDesignOOnline.comm

    1

    1

    17. Import tfrom thehave soselect thcan alsohave aclatest vecatalogsversionCADWo

    18. Completthat.

    C

    the A10, Be CADWorxme on your

    hem. I'll impo bring in ancess to theersion yous, projectss of the leg

    orx)

    te things as

    Copyright201

    10, and C1x_Lesson_Fr system yoport the B1ny of the old

    em. (Note: u can also s, and specgacy spec

    s shown to

    12AllRightsRe

    10 spec. YFiles\Specifou want to i0_M and thd sample s In the Speimport datcs in the fos found in

    this point,

    CADWor

    5

    eservedCADT

    You can impfications folmport in, yo

    he C10_M specs as weec folder inta from anyolder. Thes earlier ver

    and well c

    x2013Sp

    TrainingTechno

    port them der, or if yoou can specs. Youell, if you n your y of the se are newrsions of

    continue aft

    pecificatio

    ologies,LLC

    ou

    u

    w

    er

    nsVideo5

    5

  • Sp

    1

    2

    3

    4

    5

    pecifica

    1. Now let'A10_M, componhalf of th

    2. Let's saygoing towhat is ito inch a

    3. I'm goingout the b

    4. If I scrogoing tosay Schtype "SCcome ovclick on

    5. So that pto say Pwhateve

    ations V

    s modify thand it will oents displahe screen.

    y that we w click the pin our specand a half, 2

    g to click obottom part

    ll up and lo change thedule 40 inCH 40." Anver here ananother on

    part is set. PIPE, SCH4er thickness

    Video S

    he spec. I'mopen in theying, and thThis will fil

    wanted to mplus next t, and we ha2 to 24, and

    on the 2 to t of the scre

    ook, I'm gohe descriptn this particnd then to md select fo

    ne of these

    Let's say n40, SMLS, As it was.

    ix

    m going to de editor. I'll here is a del out as I se

    modify the pito "pipe," aave three ed here's so

    24. When een with sp

    oing to chantion. Whatular spec, smake this coor the schedboxes, it'll s

    now that I wASTM A106

    double clickget a list of

    etail screenelect a com

    ipe informaand I'll look entries. Theme pipe nip

    I click it, it ec informat

    nge some tht I'll do is I wso I'm goingome out, I'mdule, 40 forset that.

    wanted the 6 GR B, an

    k the f

    n in the lowemponent.

    ation. I'm and see

    ere's the happles.

    starts fillingtion.

    hings. I'm want this tog to just m going to r that. If I

    descriptiond then also

    er

    alf

    g

    o

    n o,

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo6

    6

    7

    8

    9

    6. This is ware thingWhat I cthis boxIf I click and go fvalues in

    7. What I wincludedthis arroNow mycomma,

    8. To makpress thOK, it'll aand it witake a lo

    9. Now wethis. Cli

    C

    where this Sgs we can dcan do undex with 3 dothat, what

    find a thickn that table

    want to do id automaticow, and it'll

    y description and then t

    ke this read he space bactually putill get set. Cook.

    e can see hick Apply t

    Copyright201

    Spec Editordo on a comer this longots to do a sI'll be able t

    kness tablee.

    s take the mcally as partl come oven is going tohe thicknes

    well I'll clicbar, and just that up in Click the b

    how the desto save thes

    12AllRightsRe

    r gets reallymponent-byg descriptiospecial formto do is clice. There ar

    main thickt of my descr to the righo have thisss value at

    ck after thast type "THthe string.

    box with 3

    scription wilse changes

    2

    eservedCADT

    y nice, becay-componenon area, I cmat for this ck the dowre different

    kness and jcription. Soht in the dia typed part the end.

    at field valK." Then wAt this poindots again

    ll read. Lats.

    TrainingTechno

    ause there nt basis. can click componen

    wn arrow fields and

    ust have it o I'll click

    alog box. first, then a

    ue and when I say nt click OKn and we'll

    ter well tes

    t.

    a

    K,

    st

    ologies,LLC

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo6

    1

    1

    1

    1

    1

    10. Let's do the minplus nexgate val

    11. Select tfills out ichanges

    12. Let's sayvalve. SWorks fione.

    13. Next letput C33that we we wantto contro

    14. Here areranges, these boI'm going

    C

    a couple thus to closext to valvelves.

    the gate vain the detais here.

    y here that So we'll clicile. Find W

    t's put a tagP for that. can do. Wt. We can pol the colors

    e the size rayou could c

    oxes. Depeg to click ap

    Copyright201

    hings with te the pipin

    es. Scroll d

    alve, 150 pols at the bo

    we want tock the dow

    Wheel_Gate

    g in. We'll cSo we have can do soput it on a cs.

    anges. If ycome in anending on wpply to take

    12AllRightsRe

    the valves nng informatown, and w

    ound flangottom, and w

    o put some wn arrow, ae_150_F_M

    click in thee some optome speciacertain laye

    you wanted d check on

    what the dae these cha

    3

    eservedCADT

    now. I'm gotion, and I'

    we'll find th

    ged. The inwe want to

    Top Worksand we'll selM.top, and w

    e Tag field,tions here,

    al SKEYs foer, and we h

    to modify tn or check oata file is, it'anges.

    TrainingTechno

    oing to clickll click the

    he flanged

    nformation make some

    s on this lect our Topwe'll use tha

    and we'll some thing

    or Isogen if have option

    the size off some of ll show it.

    k

    e

    p at

    gs

    ns

    ologies,LLC

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo6

    1

    1

    1

    1

    15. So why test this

    16. OK. Weon the Schanges

    17. Now letscreen, using a

    18. Click Seselect o

    C

    don't we ge.

    e've modifieSpec Editos that we ha

    s test this. and go intometric tem

    etup and clour project

    Copyright201

    et it to here

    ed our specor and clickave made t

    I going to o CADWor

    mplate.

    lick the spet.

    12AllRightsRe

    , and what

    c. Go up hek Save. Thio this point

    minimize thrx Plant. S

    ec/size. C

    4

    eservedCADT

    we'll do in

    re to the mis will save t.

    he lower paStart a new

    lick Brows

    TrainingTechno

    a moment

    main buttonall the

    art of the w drawing

    e, and

    is

    n

    ologies,LLC

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo6

    1

    2

    2

    2

    2

    19. The projsame naA10_M, Apply a

    20. Now weset to skinds of modifiedgood. A

    21. Click Pihow the pipe, we

    22. The sysAlso, it hSo it cam

    23. You canin all kinbuilding also builformat g

    C

    ject that I hame, that's and then c

    and Close.

    ll draw a phow all compipe displa

    d. This is thAlso I can se

    ipe and clicmaterial is

    ell see wha

    stem has dehas a commme out just

    n see that thnds of inform

    a long desld a part nu

    gives us a lo

    Copyright201

    ave is callegood. If no

    click next t

    piece of pipemponents, ayed. On mhe one thatee that it ha

    ck a coupls being descat the long d

    escribed it ama, and the

    like we wa

    his is very pmation fromscription witumber in a sot more ver

    12AllRightsRe

    ed Project Oot, just get yto 10 unde

    e. If the spyou possib

    my screen h says Scheas my desc

    e of pointscribed. If wdescription

    as a Scheden the thicknanted.

    powerful, bem the data fi

    h a numbesimilar fashrsatility than

    5

    eservedCADT

    One. If youyours. Clicer Main, an

    ecview toobly might hahere's the oedule 40, socription show

    s. Now wewe double csays.

    dule 40, likeness value

    ecause youiles, and aur of options

    hion. This nn we had be

    TrainingTechno

    u have the k on the nd click

    l palette is ave two one that I o that lookswing.

    want to seclick that

    e we wantedwith a THK

    u can bring utomate s. You can new spec efore.

    ologies,LLC

    s

    e

    d. K.

  • PipinggDesignOOnline.comm CADWorxx2013SppecificationnsVideo6

    2

    2

    2

    24. OK out Click ona couplcan just right. Yflange, gautomat

    25. Doubleas well.

    26. So everygot it to

    C

    of the dialn the gate ve of pointsclick right

    You can seegasket and tic placeme

    e clicking t

    ything is wohere, and t

    Copyright201

    og box, anvalve on ths to place it on the ene how connbolts, beca

    ent. Also it

    he valve s

    orking like ithen we'll g

    12AllRightsRe

    nd next we'lhe specviewit. If the pip

    nd of this pnected to thause thoseplaced the

    hows the v

    t should heo on after t

    6

    eservedCADT

    ll bring in a w tool palettping rules apipe and dre pipe and rules were Top Works

    valve tag w

    ere. Make shis.

    TrainingTechno

    gate valvete, and clic

    are set, werag to the placed theon for

    s.

    as included

    sure you've

    ologies,LLC

    e. ck

    e

    d

  • Sp

    1

    2

    3

    pecifica

    1. In this visystem. and I'll dto add twthe worbottom anew valv

    2. The typearrow afind the two newvalve, an

    3. First wethat, andwe madEverythireads thfor us au

    ations V

    ideo, we're I'm in the

    double-clicwo valves inrd valves aarea of the ve.

    e of valve wand find ga

    gate valve w valve datand we mad

    'll add the cd the systeme earlier. Ying else fille

    he scheduleutomatically

    Video S

    going to adspec edito

    ck on the Anto this spe

    and right-clscreen ope

    we'll add is ate. In the d

    well be ada files. We e a threade

    compact em will read You can seeed out in thee and the my.

    even

    dd some gaor; we haveA10_M specec. So if I plick, I can cens and is n

    a gate valvdata table, cding. In an made a co

    ed by flange

    xpanding the size oue, it has thee data is st

    material info

    ate valves ie our Projeccification. Wput the poiclick on Adnow availab

    ve, so click click the doearlier vidempact expaed gate val

    gate valveut of the date 8 to 12 standard. Thrmation, an

    nto the ct_1 open,We're goingnter over dd. The ble to add a

    the down own arrow teo, we madanding gateve.

    e. I'll click ota file that setting. he system nd fills it out

    g

    a

    to de e

    on

    t

  • PipinggDesignOOnline.comm

    4

    5

    6

    7

    4. Let's speavailablewe creacompactnow bee

    5. This willto set itVALVE,then clic

    6. Next, weright-cliopen up

    7. Scroll d

    C

    ecify the toe entries, wated. Scrolt (WHEEL_

    en added.

    be an optiot for Option, COMPACck Add.

    e'll add the ick on valv

    p another di

    down and s

    Copyright201

    p works forwe'll set thel down and

    _GATE_CM

    onal componal, and forT EXPAND

    other valveves. Then calog box to

    select gate

    12AllRightsRe

    r this valve.e top works find that. It

    MPT_150_F

    onent. We'r the descrDING. The

    e. Scroll bclick add,

    o fill out.

    e valves.

    CADWorx

    2

    eservedCADT

    Looking as to be thet's the whee

    F_M.top), s

    ll click on iption entetag will be

    ack up to vand the sys

    x2013Sp

    TrainingTechno

    at the e one that el gate

    so that has

    the buttoner GATE e C33E and

    valves, andstem will

    pecification

    ologies,LLC

    n

    d

    d

    nsVideo7

  • PipinggDesignOOnline.comm

    8

    9

    1

    1

    8. This onecreated When itsize. Thlooks go

    9. This valvworks ouVALVE,

    10. So everyhere is wdoes fordifferentcome in gate valv

    11. Next wehow to dunder flalook acrthe valveincludedcan righ

    C

    e will be theearlier. Scs selected,he values inood.

    ve is an oput on this v, THREADE

    ything is fillwe made thr us is on tht gate valveshown in b

    ve.

    ell add a codo that. Scanged, thenoss, there ies measur

    d in the speht-click on

    Copyright201

    e threaded croll down to, the systemn the dialog

    ptional comalve for nowED BY FLA

    ed out wellhis an optiohe spec viewes, these thblue. This i

    ouple of concroll up andn control vais a CNT_Frements. Tecification.

    Valves, an

    12AllRightsRe

    by flangedo the data fm will show g box are fil

    mponent asw. For des

    ANGED. Fo

    , click Addnal componw tool paletat have Opndicates th

    ntrol valvesd look for calve, 150-poF_A_150 dahis is the stScroll up tnd click Ad

    CADWorx

    3

    eservedCADT

    d gate valvfile and selits set for aled out and

    s well. Leavscription tyor the tag u

    . One thingnent, and wtte, when it

    ptional chechey are not

    , so we cancontrol valound flangeata file whictandard conto valves, wdd.

    x2013Sp

    TrainingTechno

    ve that we ect it. a two-inch d everything

    ve the top ype GATE use G38T.

    g to mentiowhat that

    lists the cked off willthe default

    n illustrate lves. Looked. If we ch contains ntrol valve where you

    pecification

    ologies,LLC

    g

    on

    k

    nsVideo7

  • PipinggDesignOOnline.comm

    1

    1

    1

    1

    1

    12. We'll adControl

    13. Click thlist. No file to ouspec.

    14. Click th

    15. Now, weclick opedisplayeyou nam

    16. The catathe specversionsbring in we have

    C

    d a control . Now wel

    he down arother ones

    ur catalogue

    he top butto

    ell open ouen. Actualled and clickmed yours d

    alogue is opc editor scres. It gives ulegacy data

    e elsewhere

    Copyright201

    valve. Clicll select one

    row. The Cs rated at 15e, which wi

    on and clic

    ur catalog. y, we can c

    k on it. Clicdifferently e

    pen, expaneen works fus a couplea from an ee on our sys

    12AllRightsRe

    ck the dowe to add.

    CONTROL_50 are listedll then let u

    ck Save. T

    Click on thcome over ick on the Cearlier click

    d the Data for brining i

    e of ways toearlier spec stem.

    CADWorx

    4

    eservedCADT

    wn arrow a

    _F_A apped. Well ad

    us bring the

    This saves t

    he top buttin the list if

    Company_1that one.

    Tables. Thin data files

    o import dator, from a

    x2013Sp

    TrainingTechno

    nd click on

    ears in the dd some dam into this

    the project.

    ton, and its

    1 catalog.

    his area of s from olderta. We candata file tha

    pecification

    ologies,LLC

    n

    ta

    If

    r n at

    nsVideo7

  • PipinggDesignOOnline.comm

    1

    1

    1

    2

    2

    17. Click Imfor addin

    18. Click A

    19. The direwhich on2010 or remembdownloa

    20. Locateddata fileand holOpen.

    21. The files

    C

    mport Fromng files to b

    Add Files.

    ectory we'ren my macha 2009 or w

    ber we incluaded earlier

    in this folds for other d down th

    s appear in

    Copyright201

    m Data Filebring in.

    e looking in ine is CADWwhatever.

    uded the dar (the CADW

    er are somkinds of coe Shift key

    our list to i

    12AllRightsRe

    e, and this b

    is a legacyWorx 2012If you don't

    ata files in thWorx_Less

    e control vantrol valves

    y and click

    mport.

    CADWorx

    5

    eservedCADT

    brings up a

    y version of . Yours cot have one he group ofon_Files fo

    alves. Thess. Click on

    k on the K f

    x2013Sp

    TrainingTechno

    dialog box

    f CADWorxuld be a of these, f files you

    older).

    se are the the B file,

    file. Click

    pecification

    ologies,LLC

    x

    ,

    nsVideo7

  • PipinggDesignOOnline.comm

    2

    2

    2

    2

    2

    2

    2

    22. And thenimportinImport, for eachdata file

    23. Save thsystem pcatalogs

    24. Scroll d

    25. Click ththe DataHover ovFisher T

    26. Click onThe valu

    27. We havsample works filon the b

    28. For des

    C

    n if I click og. Click oand the sy

    h of these s that can b

    he catalog prompts if ws. Click Ye

    down to Va

    he down ara Table youver these a

    Type E, and

    n the Typeues are com

    ve an optionactuator avle for this va

    button to se

    cription en

    Copyright201

    on one of thn the contstem will brcontrol vabe added to

    and reopewe want to es and then

    alves and r

    row for Typu will see dand you cand a Fisher T

    E control vming from th

    n to add a tvailable. Moalve. Leavt it as an op

    nter Contro

    12AllRightsRe

    e files, I'll brol valve bring it in to lves. Nowo our specif

    en the Projupdate the

    n double-c

    right-click o

    pe and seleifferent valvn see there Type K.

    valve and ahe data file

    top works fost likely we this field ptional com

    ol Valve, F

    CADWorx

    6

    eservedCADT

    be given opbutton and your catalo

    w we have sfication.

    ect1 projee project froclick the A1

    on Valves.

    ect Controlve data filesis a Fisher

    a dialog box.

    for the valvwe would cre

    blank for nmponent.

    isher E. F

    x2013Sp

    TrainingTechno

    ptions for click

    og. Do thatome new

    ct. The om the base10 spec.

    Click Add

    l Valve. Fos available.r Type A, a

    x appears.

    ve. There'seate a top now. Click

    or the Tag

    pecification

    ologies,LLC

    t

    e

    d.

    or .

    a

    nsVideo7

  • PipinggDesignOOnline.comm

    2

    3

    3

    3

    3

    3

    3

    value us

    29. Scroll u

    30. For Typ

    31. For Datacan see box.

    32. Set the vFischer

    33. Save th

    34. Start a

    35. Click Sespec. S

    C

    se CVFE. W

    up to Valve

    pe, use Co

    a table, selthe informa

    valve to Opr K. For Ta

    he spec an

    new draw

    etup and clSet the size

    Copyright201

    When done,

    es. Right-c

    ntrol Valve

    lect the Typation from t

    ptional. Foag use CVF

    nd go back

    ing, using

    lick to opene to 3, and

    12AllRightsRe

    , click Add

    click and c

    e.

    pe K controthe data file

    or descriptiFK. Click A

    into CADW

    a Metric te

    n your Proje click Apply

    CADWorx

    7

    eservedCADT

    d.

    lick Add.

    ol valve. Age files out th

    ion use CoAdd when d

    Worx.

    emplate.

    ect 1. Seley & Close.

    x2013Sp

    TrainingTechno

    gain, you he dialog

    ontrol Valvdone.

    ect the A10

    pecification

    ologies,LLC

    ve

    nsVideo7

  • PipinggDesignOOnline.comm

    3

    3

    3

    3

    4

    4

    36. If your ScomponappearinSettingscompon

    37. The curspec vievalves inthe rang

    38. Scrollingcompactgate valvwent fro

    39. Set theappear, size ran

    40. Set theflanged that and

    41. Right-c

    C

    Spec View ents, you'll ng in the liss tab and mnents butto

    rrent size thew tool palen the list of ge of these

    g down, wet expandingve). This ism eight to

    e size to 8as well as ge.

    e size to 2gate valve.

    d see how it

    click on Pip

    Copyright201

    tool palettestart seein

    st of compomake sure on checked

    hat you're sette. Thats

    componenvalves.

    don't see tg gate valves because t12 inches i

    and the coone of the

    . That's the. If we scrot appears.

    pe, and clic

    12AllRightsRe

    e is set to shng these opnents. Youyou have

    d.

    set to contros why we sets. The thr

    the other twe and the ththe compacn size.

    ompact expother contr

    e size we holl down, we

    ck Threade

    CADWorx

    8

    eservedCADT

    how optiontional contru can clickthe show o

    ols what apee these twree-inch siz

    wo that werehreaded byct expandin

    panding gatrol valves th

    had for our te'll see it, so

    ed. Click t

    x2013Sp

    TrainingTechno

    al rol valves k the optional

    ppears in thewo control ze falls with

    e added (thy flanged ng gate valv

    e valve willhat is in tha

    threaded byo let's place

    two points

    pecification

    ologies,LLC

    e

    in

    he

    ve

    at

    y e

    nsVideo7

  • PipinggDesignOOnline.comm

    4

    4

    4

    4

    4

    So work

    to place

    42. Click onEnter. Tpipe. Ch

    43. Set the

    44. Click onshould cplace flaflange,

    45. Scroll dvalve, aautomat

    46. Check thclicking

    go ahead king as exp

    C

    e a piece o

    n the threaThe valve wheck it to ve

    e size to 8

    n the Fisheconnect autanges automgasket and

    down and and press Etically. You

    he descriptthem. You

    and test pected.

    Copyright201

    of threaded

    aded by flawill connecterify its con

    . Place a p

    er Type K ctomatically.matically, thd bolts. .

    click on thEnter. Theu should ge

    ions on eacu should als

    out your c

    12AllRightsRe

    d pipe.

    nged gate t automaticannected pro

    piece of pi

    control valv Since thehe system

    he compac valve shout prompted

    ch of your cso have Tag

    component

    CADWorx

    9

    eservedCADT

    valve and ally to the eoperly.

    pe into the

    ve and pres rules haveshould pla

    t expandinuld connect for a top w

    componentsg values in

    ts and ver

    x2013Sp

    TrainingTechno

    press end of the

    drawing.

    ss Enter. Ite been set tace a

    ng gate t

    works.

    s by doublethem.

    rify they a

    pecification

    ologies,LLC

    t to

    e

    re

    nsVideo7

  • Ca

    1

    2

    3

    4

    atalog V

    1. In this vi

    2. We're goalso goinsettingsso that wset up a

    3. Let's staopen up(Compa

    4. Click thflanges plus nexFLG_W_will be cwe mod

    Video E

    ideo we're g

    oing to creang to go int. We're gowe can prod minimum a

    art out with p the compaany1.cmp).

    he plus nexand expan

    xt to Flang_150. The

    changed so el them.

    Eight

    going to loo

    ate a specifto the cataloing to modiduce graphand maxim

    our catalogany catalog.

    xt to the dand them (clige Weld Ne

    data fieldswe can pro

    ok at severa

    fication fromog and chaify some of

    hics in enhaum pipe len

    g. Click on we created

    ata tables aick on the eck, and dos open up aoduce enha

    al new thing

    m scratch, aange some

    the measuanced modength.

    n the main d earlier

    and scroll d+ sign). C

    ouble clicknd some of

    anced graph

    gs.

    and we're of the

    urement filee. We'll als

    button, an

    down to the Click on thk the f the fields hics when

    s so

    d

    e

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo88

    5

    6

    7

    5. I'm goingto set uphover oSo well row for t

    6. Next clicthe raisethe exte

    7. The nexvalue enThe boltbolt holbe the pthat valu

    C

    g to expandp the 6 inch

    over this fieclick in th

    the 6 size)

    ck the arrowed face lengnsion of the

    xt one is gonter in 22.3t circle diamle number.pipe inside ue enter 15

    Copyright201

    d this columh size here eld we can at field and.

    w and go ogth) enter 1e face.

    ing to be th35. Next wimeter will be. For that fidiameter

    2.4.

    12AllRightsRe

    mn display afor enhancesee it's thed enter in 2

    ver and up1.52. This

    he bolt holeill be the boe 241.3. Thield enter in(the column

    2

    eservedCADT

    a little, and ed graphics

    e raised fac215.9 (Note

    p. In this fieis the meas

    e diameterolt circle dhe next fieldn 8. The nen is labeled

    TrainingTechno

    we're goins. If we e diameter: Its on the

    eld (which isurement fo

    r, and for thiameter. d holes theext one will d PID). For

    g

    . e

    s or

    is

    e

    r

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo88

    8

    9

    1

    1

    8. This compipe. MPipe. T

    9. In the nesetting ainch sizmaximu

    10. What's model easking ifcan let yyou wanin design

    11. The ETSinsertionchange.The num

    C

    mpletes theinimize the

    Then double

    ew version a pipe minimze, let's putum length,

    this will do xceeds 600f you want tyou keep pint to utilize n consisten

    S value in tn. Its a sys It stands f

    mber will va

    Copyright201

    e flanges. Ne flange lise-click the

    of CADWomum lengtht in 300 forput 6,000

    is when the00 (6 meterto split the pe lengths it. Again, h

    ncy.

    he right colstem settingfor Bitwise

    ary, depend

    12AllRightsRe

    Now let's dost, and clice PIP_W_ST

    orx we haveh and maximr the minimin that field

    e pipe lengrs) the systpipe into shwithin fabr

    heres a new

    umn has tog and not soEnd Type Ping upon th

    3

    eservedCADT

    o somethingk the plus TD.

    e a rule thatmum lengthmum lengthd.

    th youre pem will prohorter segmication guidw rule whic

    o do with coomething yPlacement he type of c

    TrainingTechno

    g on the next to

    t allows h. For the 6h. For the

    lacing in thempt you

    ments. Thisdelines, if h can assis

    omponent youll have tControl.

    component.

    6

    e

    s

    st

    to

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo88

    1

    1

    1

    1

    12. Scrollinthe GATcan placplace it uinsertion

    13. Some ofit has ancan insethe cent

    14. The easETS valalready

    15. Get younext vide

    C

    g down to vT_F_150. Yce a valve fusing a cenns, which m

    f the ETS vn ETS of seert a Tee, ster, etc.

    siest thing toue in an exdone for yo

    ur catalog meo.

    Copyright201

    valves, go tYoull see tfrom either nter insertio

    match the ET

    values get peven. So thuch as left

    o do if youxisting file. ou automat

    modified to

    12AllRightsRe

    to a gate vahat these hend, and yo

    on. So therTS value.

    pretty involvhere are a nend to the

    re creating Typically thically.

    here, and w

    4

    eservedCADT

    alve and dohave an ETSou can righre are three

    ved. If we lnumber of wcenter, bra

    a new file ihe system w

    well continu

    TrainingTechno

    ouble-clickS of 3. You

    ht-click and e possible

    ook at Teeways you nch first to

    is use the will have th

    ue in the

    ologies,LLC

    k u

    s,

    is

  • Ca

    1

    2

    3

    4

    5

    6

    7

    atalog V

    1. We've uand nex

    2. What weproject.

    3. The systcatalog last opechanges

    4. You canimport inand modbecauseIts easiethan it is

    5. But let's we just wgo abou

    6. Click onbrings uinformat

    7. The comwill be arating w

    Video N

    pdated ourxt we'll open

    e're going to

    tem promp(Company1ned. Click s.

    n create a nn a legacy sdify it. I thine there are er to take ss to create s

    say we wawanted to h

    ut creating a

    n the Specp a file for tion. For th

    mponent ca 78 C (we'

    will be 14 B

    Nine

    r cataloguen our proje

    o do in this

    ts us to upd1.cmp) hasyes to con

    new spec a spec from ank that's theso many co

    something tsomething

    anted to havhave a few a spec from

    cifications tus to use fo

    his example

    lass will be're in metric

    BAR.

    e. Let's go ect (Projec

    video is ad

    date the pr changed stinue and in

    couple of wan earlier vee easiest womponentshat has beefrom the ve

    ve a speciacomponent

    m scratch.

    tab, click thor filling oute name the

    e 150. Thec units here

    ahead andct1.prj).

    dd a new sp

    roject, sincsince the prnclude the

    ways. One ersion of CA

    way to go ab built into then done anery beginnin

    al spec, andts in it. Her

    he Add buttt the new spnew spec A

    e temperatue). The pre

    save it,

    pec to the

    ce the baseroject was latest

    way is to ADWorx bout it hese specsnd modify it,ng.

    d perhaps re's how yo

    ton. It pecs A20_M.

    ure rating essure

    e

    s. ,

    ou

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo99

    8

    9

    1

    1

    8. The sizesome sizand cleahalf-inch

    9. I'm going3-1/2, anSo we'll we want

    10. Reviewisize.

    11. The thicmateriamodifiedgrades t

    C

    e table willzes that wilar out sizeh on and go

    g to take a nd the 5. Ntake out fro

    t to have fo

    ng whats b

    ckness tabal table will bd within the to be availa

    Copyright201

    l be Size. Fll not be in t

    es up to a ho up.

    couple of oNext take oom 28 up.

    or this partic

    been remov

    le will remabe as well. catalog, if

    able.

    12AllRightsRe

    For this sizethis spec. half inch. T

    other sizesout all the lThis will se

    cular specif

    ved, Ill also

    ain the stan Later the mwe want ad

    2

    eservedCADT

    e table weClick the dThis spec w

    out. Lets rlarger sizeet our size rication.

    o take out th

    ndard one. material tabdditional ma

    TrainingTechno

    ll remove down arrowwill start at a

    remove thes above 24ranges like

    he 26 inch

    The ble might beaterials and

    w a

    e 4.

    e d

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo99

    1

    1

    1

    1

    1

    12. The systtables abuild a lolook at hdescrip

    13. The systclick in thas a shand clickand clicto the otnumber.it's all auexample

    14. When yoseparatefeature.

    15. Again, sand clic

    16. We havespec us

    C

    tem has annd put themong descriphow that is tion field e

    tem can alsthe part numhort part nuked on this cked on thether side of . This strinutomated, le.

    ou use this e them with

    since it's cock OK. So

    e options fose color se

    Copyright201

    n ability to tam together ption. Latedone. For

    empty.

    so build parmber box, ember stringfirst field,

    e bottom ff the dialog g is uniqueet's just go

    method, yoh hyphens.

    ompletely athat's done

    or the layer even.

    12AllRightsRe

    ake fields ointo a stringr we're gointhis examp

    rt numberseach field ing assigned then held

    ield, and mbox, we wo

    e for each coahead and

    ou can use You have

    utomatic, we.

    name and

    3

    eservedCADT

    out of theseg that can ang to take aple well lea

    automatican the variouto it. So if down the S

    mapped theould build aomponent,

    d do it this w

    certain fieloptions on

    well use it a

    layer color

    TrainingTechno

    e various automaticala really goove this

    ally. If we us tables, we took thiShift key em acrossa long part

    and since way for this

    ds, or utilizing thi

    as given,

    r. For this

    ly od

    s

    s

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo99

    1

    1

    1

    17. Next wemine in.

    18. To start will openpointer say Addour com

    19. If we cliThe Typwill be P

    C

    ell enter ou The desc

    adding comn up a blanout into th

    d. Then wemponents.

    ck the dowpe (click thePIP_W_ST

    Copyright201

    r name. Yocription is S

    mponents, dk spec. To

    he blank are'll start sele

    wn arrow ue down arroD.

    12AllRightsRe

    ou put in yoSample Te

    double clico add comprea of the secting our d

    under Grouow) will be p

    4

    eservedCADT

    our name, st Spec. C

    ck the A20onents moscreen, rigdifferent ca

    up, we can pipe. The

    TrainingTechno

    and I'll typeClick OK.

    _M. This ove the ght click antegories for

    select pipedata table

    e

    nd r

    e.

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo99

    2

    2

    2

    2

    2

    2

    20. The systprevioussetting h

    21. Click theScheduthicknespipe. Lawill disp

    22. For longthe box you wou

    23. We alsodata fielcovered

    24. For this Well do

    25. Type in the pipe

    C

    tem fills ous form that where under

    e down arrule 40. Whesses, since ater when wlay the pipe

    g descriptiofor long de

    uld like. Th

    o have the ads from the in a later v

    example, w the autom

    SAMPLE P has been a

    Copyright201

    t fields in thwe set up. Schedule a

    row for Schen this is sethe schedu

    we draw thise inside dia

    n you havescription anat's the trad

    ability in thise catalog tavideo.

    we'll leave tation later.

    PIPE DESCadded to ou

    12AllRightsRe

    he dialog bo We're goin

    and Materia

    hedule, andet, the systeule determins in enhanc

    ameter.

    e some choind type in aditional way

    s new versiables to auto

    the long de

    CRIPTION, ur spec.

    5

    eservedCADT

    ox, based ong to do onal.

    d this will bem can loones the thicced mode,

    ices. You cany kind of y of doing it

    ion of CADWomate this.

    escription v

    and click A

    TrainingTechno

    on the e more

    e set to k up wall

    ckness of ththe system

    can click in descriptiont.

    Worx to us This will b

    very simple

    Add. Now

    he

    e be

    e.

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo99

    2

    2

    2

    2

    3

    3

    26. Now weright cli

    27. The GroRadius So we'll

    28. The dialwhich w

    29. For the lAgain, th

    30. On my sDegree.

    31. Click Ad

    C

    're going toick, and we

    oup is goingElbow, andgo find 90L

    og box fills well do later

    long descrhis will chan

    screen the s I'll modify

    dd. Now ri

    Copyright201

    o add a fewe'll say Add

    g to be Elbd the Data L_W_STD.

    out. We cor.

    ription entenge in som

    short descthat with 9

    ight click to

    12AllRightsRe

    w more comd, and we'l

    bows. The Ttable will b

    ould specify

    er ELBOW e subseque

    cription nee0%%D LR

    o add anot

    6

    eservedCADT

    ponents. I'ml bring in an

    Type will bebe the stan

    y specific m

    DESCRIPTent videos.

    eds to be sELBOW.

    ther compo

    TrainingTechno

    m going to n elbow.

    e a Long dard one.

    materials,

    TION.

    et to 90

    onent.

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo99

    3

    3

    3

    3

    3

    3

    32. Next we

    33. The typthe FLGDESCR

    34. Next addThe GroGasket,

    35. The othdescrip

    36. Right clwill be foType is

    37. For the lAdd wh

    C

    ell add a Fla

    e will be theG_W_150.

    IPTION. W

    ded will be oup will be and the da

    er fields wtion enter

    lick in the or Bolts. ThStud Bolts

    long descren done.

    Copyright201

    ange. The

    e Flange WFor the lon

    When done,

    Gaskets anGaskets/Bata table is

    will be left aGASKET D

    open area he Group ws, and the d

    ription ente

    12AllRightsRe

    Group will

    Weld Neck.ng descript

    click Add

    nd Bolts. RBolts/Weldss GAS_F_2

    as shown.DESCRIPT

    to add anowill be Gaskdata table

    er BOLT D

    7

    eservedCADT

    be Flange

    The data tion type in.

    Right clicks. The Typ2_150.

    For the lonTION. Click

    other compokets/Bolts/Wis BLT_F_

    ESCRIPTIO

    TrainingTechno

    es.

    table will bn FLANGE

    and add. pe is

    ng k Add.

    onent. NexWelds. Th

    _150.

    ON. Click

    be

    xt he

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo

    rrx2013SppecificationsVideo99

    3

    38. Completthe next

    C

    te your spet video well

    Copyright201

    ec to this pol see how E

    12AllRightsRe

    oint. Then SEnhanced G

    8

    eservedCADT

    Save the PGraphics wo

    TrainingTechno

    Project. In ork.

    ologies,LLC

  • Sp

    1

    2

    3

    pecifica

    1. In the pradded ain some test.

    2. I have CStart a n

    3. On the Coptions fEnhanc

    ations V

    revious videa new spec.

    componen

    CADWorx snew drawin

    CADWorx Pfor the Curr

    ced.

    Video Te

    eos we mod. Now let's nts. Well u

    started. Yog using the

    Plant I tab, rent Drawin

    en

    dified the cogo into CAse the enha

    ou start it if e metric tem

    click the Seng, click on

    ompany caADWorx andanced mod

    you havenmplate.

    etup buttonthe button

    atalog and d we'll bringde for this

    't done so.

    n. In the to set 3D

    g

  • PipinggDesignOOnline.comm CADWo 0

    rrx2013SppecificationsVideo11

    4

    5

    6

    7

    8

    4. Click Sp

    5. Select Pclick on size valuthat we bolt circl

    6. Click onShow Olength fo

    7. Everythiset to aurules wil

    8. Click Pipoints amy screred.

    C

    pecification

    Project1 anthe 6 inch

    ues in the fmodified. Ile diameter

    Piping RuOptions. Eaor that.

    ing else is sutomatic. Tll be set to S

    ipe (from thnd drag it oen, the sys

    Copyright201

    n/Size and

    nd click Opesize under lange data In an earlier, bolt holes

    ules. Set tharlier we se

    set as showThe first parShow Optio

    he Specviewon across astem interru

    12AllRightsRe

    click the B

    en. Select r Main. Earfile, the 6 inr video we

    s, and the n

    he Apply Pet up a mini

    wn here; a lrts, for applons. Click A

    w tool paletand come do

    pts me and

    2

    eservedCADT

    rowse butt

    the A20_Mrlier, when wnch flange set dimens

    number of b

    Pipe Lengthimum and a

    ot of these lying the sizApply and

    tte). Click aown. And a

    d the pipe I

    TrainingTechno

    ton.

    M spec. Nexwe added was the on

    sions for thebolt holes.

    h Rule to a maximum

    rules will bze and specClose.

    a couple of as I do it onplaced is

    xt

    ne e

    m

    be c

    n

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo 0

    rrx2013SppecificationsVideo11

    9

    1

    1

    1

    1

    9. One of tthat the It asks ifyes by dsplit the routing oEnter to

    10. You mayhelp with

    11. Now I wat the tocorner I of AutoCmove thTop, the

    12. In settincan alsocan seleAnother screen. select a

    13. All of thmouse wmode. Tpipe.

    C

    the piping rpipe I drewf I want to sdefault, so I

    pipe into twof more pipexit.

    y or may noh maintainin

    want to look op right of m

    could haveCAD also hae mouse ov

    en SW Isom

    g your viewo use the Vect a southw

    option is to You can csouthwest

    hese methowheel to zoThe system

    Copyright201

    ules is workw is longer tsplit that piell press En

    wo segmenpe. Ill come

    ot want to inng your fab

    at this frommy screen ise a southwas a view mver it, it dis

    metric.

    w, you can uiew tab on west isomeo use the mlick View aisometric v

    ds produceoom in, we'lm is now dra

    12AllRightsRe

    king. The sthan the alloece of pipe,nter to contints and thene over and

    nvoke this rbrication gu

    m a 3D views the view c

    west isometmenu right oplays the v

    use the viewthe ribbon. tric view as

    menu bar acnd then 3Dview.

    e the same l see that wawing the in

    3

    eservedCADT

    system is powed maxim, yes or no.inue. The sn I can carrclick and th

    rule, but if yidelines.

    wpoint. In mcube. If I cltric view. Ton the screiew control

    w cube for If you use

    s shown in tcross the to

    D views whe

    view. Usinwe're in enhnside diame

    TrainingTechno

    rompting mum length Its set to system will y with the

    hen press

    you can wil

    my system, lick on the This versioen. As I s. Ill click

    that, or youe that, you the video.

    op of the ere you can

    ng the hanced eter of the

    h.

    l

    on

    u

    n

    ologies,LLC

  • PipinggDesignOOnline.comm CADWo 0

    rrx2013SppecificationsVideo11

    1

    1

    1

    1

    1

    14. Click Flautomatholes fo

    15. Click flaClick pidown an

    16. Now wemy screConceptConceptthe men

    17. You cansomethior just to

    18. Make suthat.

    C

    ange and tically, and r the bolts a

    ange againpe, press nd click. P

    ll shade then and it wtual. If this tual on the

    nu bar by cl

    n see how tng you wouo have your

    ure you go t

    Copyright201

    press Entewe can seeand the rais

    n, and presEnter to coPress Ente

    is. In my swill display s

    is not avaiview tab onicking View

    he 3D Enhauld want to r drawings

    through the

    12AllRightsRe

    er. The flane that the sysed face of

    ss Enter to onnect autoer to exit.

    system I cansome shadilable, you cn the ribbon

    w, Visual Sty

    anced moddo for a prelook more r

    ese steps, a

    4

    eservedCADT

    nge will conystem is mthe flange.

    connect auomatically a

    n go to the ng options.can go to Vn. You canyles, and C

    de works. Itesentation realistic.

    and we'll co

    TrainingTechno

    nnect odeling the.

    utomaticallynd drag it

    top are on Ill set it to

    Visual Stylesn also use Conceptual.

    t might be to a client,

    ontinue afte

    e

    y.

    o s,

    er

    ologies,LLC

  • Spe

    1

    2

    3

    4

    5

    ecificati

    1. In this vispec edityou haveclick on tprogram.

    2. If you usgo to Plafiles.

    3. In the listclick thateditor as a full lice

    4. In the spethen clickhas been update th

    5. Double cediting. have a Brdisplay, y

    ions Vid

    ideo we're gotor is runninge CADWorx the Spec Ed.

    e Windows ant. You can

    t is a file calt to start the a standalone

    ense of CAD

    ec editor, clik on Projectchanged, th

    he project fro

    click the A2Looking at tranch Table you can alwa

    deo Elev

    oing to buildg. There's a open, on the

    ditor button

    Explorer, yon open up the

    lled CADWospec editor. e application

    DWorx instal

    ick on the bt One. This

    he system wiom base cata

    20_M specifithe screen, dtab. Someti

    ays adjust th

    ven

    d a branch tacouple of we CADWorx. This is an

    ou can go to e spec folder

    orxSpecEdit This is a w

    n. You don'tlled to run it

    button at the will open oll see that. I

    alog.

    ication. Thedown towardimes if this g

    he task bar at

    able. On my ways you can

    x Plant I tabeasy way to

    the CADWor, and you'll

    tor.exe. Youway you can u

    t necessarilyt.

    e top left of ur project. IIf prompted,

    e spec is nowd the bottom gets hidden ot the bottom

    system, the n start it. If b you can

    o start the

    orx folder ansee a list of

    u can doubleuse the spec

    y have to hav

    the screen, If the catalog click yes to

    w open for we'll see weon the .

    nd

    e

    ve

    g o

    e

  • PipinggDesignOOnline.comm

    6

    7

    8

    9

    1

    6. You can tabs, if yoopens upcorresponWe don'thave the

    7. Click in size is diWhen onsome optselect for

    8. We'll selthis size So this secombinat

    9. If you doin your spcell highlControl-table.

    10. Ill pauseget filledWell car

    C

    pull the taskou don't see

    p the branch tnd to the sizt have the 3 22-inch size

    the square splayed alon

    ne of these sqtions. The syr the branch

    ect the Stracombinationelection willtion.

    on't want to hpec. That's lighted, then-V it. So we

    e the video wd in. Then I'lrry on in a m

    Copyright201

    k bar down othem at firsttable for edies that we se1/2. We done in the branc

    as shown. Tng the left, anquares is seleystem will stable to use.

    aight Tee. Wn. When youl allow Tees

    have crossesanother way

    n do a Contre can begin t

    while the resll show you

    moment after

    12AllRightsRe

    or back up, at. Click on iting. You cet earlier, whn't have the 5ch table.

    This will be nd the brancected, and yhow the typ. Right click

    When its selu select a Teand Crosses

    s, you can juy to control srol-C and theo add some

    t of the squathe squares

    r this.

    CADWor

    2

    eservedCADT

    and that maythe Branchan see that thhen we set u5-inch size. W

    a 12 by 12. ch size alongou right clices of compok.

    lected, it wilee, a Cross iss to be used

    st simply nosome of this.en click on ctees across t

    ares for tees when they a

    x2013Sp

    TrainingTechno

    y reveal the tab, and it he size rang

    up our projecWe don't

    The main g the top. ck, you have onents you ca

    l be set for s included. for this size

    ot have them . Have the cell and the branch

    and crosses are filled in.

    pecificatio

    ologies,LLC

    es ct.

    an

    nsVideo1

    1

    1

  • PipinggDesignOOnline.comm

    1

    1

    1

    1

    11. We have row acrointerior

    12. This cell combinatin a variereducing

    13. Now we V to fill ime pausetable as s

    14. Here are look the across a n

    C

    our tees in tss the branchsquare, and

    represents ation. If I rigety of fittingg tees or red

    can Controit out. So I'e the video ashown.

    the reducingsame. You number of sq

    Copyright201

    the table nowh table. You

    d right on th

    a 12-inch maght click in ts. In this br

    ducing cross

    l-C that andll begin to fi

    and finish thi

    g tees filled can see that quares, on th

    12AllRightsRe

    w. I just plau do the samhe mouse.

    ain and a 10this square,anch table, Ises. So that

    d click in anoill out these is step. Then

    out. You gesome of the

    he smaller an

    CADWor

    3

    eservedCADT

    aced them in me. Next I'll

    0-inch redu, I will be allI just want toselection ge

    other space, ureducing teen you can fil

    et your brancese extend rignd the larger

    x2013Sp

    TrainingTechno

    t